RTL8125 added fields to the tally counter, what may result in the chip
dma'ing these new fields to unallocated memory. Therefore make sure
that the allocated memory area is big enough to hold all of the
tally counter values, even if we use only parts of it.
Fixes: f1bce4ad2f ("r8169: add support for RTL8125")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/741d26a9-2b2b-485d-91d9-ecb302e345b5@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The (!fiq->connected) check was moved into the queuing method resulting in
the following:
Fixes: 5de8acb41c ("fuse: cleanup request queuing towards virtiofs")
Reported-by: Lai, Yi <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/ZvFEAM6JfrBKsOU0@ly-workstation/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
for_each_set_bit was used wrongly in aqr107_config_init() when iterating
over LEDs. Drop misleading 'index' variable and call
aqr_phy_led_active_low_set() for each set bit representing an LED which
is driven by VDD instead of GND pin.
Fixes: 61578f6793 ("net: phy: aquantia: add support for PHY LEDs")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/9b1f0cd91f4cda54c8be56b4fe780480baf4aa0f.1726580902.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
phy_modify_mmd was used wrongly in aqr_phy_led_active_low_set() resulting
in a no-op instead of setting the VEND1_GLOBAL_LED_DRIVE_VDD bit.
Correctly set VEND1_GLOBAL_LED_DRIVE_VDD bit.
Fixes: 61578f6793 ("net: phy: aquantia: add support for PHY LEDs")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/ab963584b0a7e3b4dac39472a4b82ca264d79630.1726580902.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When broadcasting data to multiple nodes via MHI, using skb_clone()
causes all nodes to receive the same header data. This can result in
packets being discarded by endpoints, leading to lost data.
This issue occurs when a socket is closed, and a QRTR_TYPE_DEL_CLIENT
packet is broadcasted. All nodes receive the same destination node ID,
causing the node connected to the client to discard the packet and
remain unaware of the client's deletion.
Replace skb_clone() with pskb_copy(), to create a separate copy of
the header for each sk_buff.
Fixes: bdabad3e36 ("net: Add Qualcomm IPC router")
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Reviewed-by: Jeffery Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://patch.msgid.link/20240916170858.2382247-1-quic_yabdulra@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Several places in drm.ko use struct drm_rect and its helpers. This
only works as the called interfaces are declared as static inline in
the header file. Fix the issue by linking drm_rect.o into drm.ko.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240919185436.86790-1-tzimmermann@suse.de
We don't use the block size information for the clear color
plane. Technically the entire fb is the single block for the
single 64B clear color surface, so there is just no way to
delcare that as a constant since the fb size can be anything.
Define the clear color block size as 0x0 to make things less
confusing. We already declared that cpp/chars_per_block=0 for
the clear color as well. That also causes the drm core code
to mostly ignore the clear color plane, which is exactly
what we want since that code doesn't know how to deal with
the clear color plane.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918144445.5716-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
When the user requests the ALL_SUB_MPAGES mode sense page,
ata_msense_control() adds the CDL_T2A_SUB_MPAGE twice instead of adding
the CDL_T2A_SUB_MPAGE and CDL_T2B_SUB_MPAGE pages information. Correct
the second call to ata_msense_control_spgt2() to report the
CDL_T2B_SUB_MPAGE page.
Fixes: 673b2fe6ff ("scsi: ata: libata-scsi: Add support for CDL pages mode sense")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
ata_msense_control_spgt2() can be called even for devices that do not
support CDL when the user requests the ALL_SUB_MPAGES mode sense page,
but for such device, this will cause a NULL pointer dereference as
dev->cdl is NULL. Similarly, we should not return any data if
ata_msense_control_spgt2() is called when the user requested the
CDL_T2A_SUB_MPAGE or CDL_T2B_SUB_MPAGE pages for a device that does not
support CDL.
Avoid this potential NULL pointer dereference by checking if the device
support CDL on entry to ata_msense_control_spgt2() and return 0 if it
does not support CDL.
Reported-by: syzbot+37757dc11ee77ef850bb@syzkaller.appspotmail.com
Tested-by: syzbot+37757dc11ee77ef850bb@syzkaller.appspotmail.com
Fixes: 602bcf2126 ("ata: libata: Improve CDL resource management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
The ilk+ disable_lp_wm boolean has the exact same role as
disable_cxsr for gmch platforms. The documentation also
still talks about CxSR on ilk+ even theough the way you
control it has now change to involve toggling the LP watermarks.
Get rid of disable_lp_wm and just use disable_cxsr for ilk+
as well.
TODO: Unify even more to not have any gmch vs. ilk+
details in high level modeset code...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916162413.8555-7-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
As with other watermark calculations, the dodgy pre-g4x
update_wm_{pre,post} flag calcultion would like to know
if a modeset is about to happen or not, and technically
later stages in the atomic_check() may still flag one.
In practice that shouldn't happen as we don't have dynamic
CDCLK implemented for these old platforms.
Regardless it'll be nice to move this old cruft out from
the supposedly platform agnostic plane code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916162413.8555-6-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
intel_wm_need_update() is a mess when it comes to variable
names and constness. The checks also keep alternating randomly
between 'old != cur' vs. 'cur != old'. Clean it all up.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916162413.8555-5-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Pull the ilk/snb/ivb LP watermark disable checks into a separate
function similar to the gmch counterpart (i9xx_must_disable_cxsr()).
Reduces the clutter in intel_plane_atomic_calc_changes() significantly.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916162413.8555-4-ville.syrjala@linux.intel.com
intel_sprite_set_colorkey_ioctl() lives in intel_sprice_uapi.{c,h}
these days. For some reason the old protoype was left behind
in intel_sprite.h and even used by i915_driver.c. Remove the
leftovers and switch to including the correct header for the
prototype.
v2: Drop more unnecessary forward declarations
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916162413.8555-2-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Add kfree(root_ops) in this case to avoid memleak of root_ops,
leaks when pci_find_bus() != 0.
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Now _percpu_read() and _percpu_write() macros call __percpu_read()
and __percpu_write() static inline functions that result in a single
assembly instruction. However, percpu infrastructure expects its leaf
definitions to encode the size of their percpu variable, so the patch
merges all the asm clauses from the static inline function into the
corresponding leaf macros.
The secondary effect of this change is to avoid explicit __percpu
annotations for function arguments. Currently, __percpu macro is defined
in include/linux/compiler_types.h, but with proposed patch [1], __percpu
definition will need macros from include/asm-generic/percpu.h, creating
forward dependency loop.
The proposed solution is the same as x86 architecture uses.
[1] https://lore.kernel.org/lkml/20240812115945.484051-4-ubizjak@gmail.com/
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch has similar problems explained in commit 7f0b1bf045
("arm64: Fix barriers used for page table modifications"), when hardware
page table walker (PTW) enabled, speculative accesses may cause spurious
page fault in kernel space. Theoretically, in order to completely avoid
spurious page fault we need a "dbar + ibar" pair between the page table
modifications and the subsequent memory accesses using the corresponding
virtual address. But "ibar" is too heavy for performace, so we only use
a "dbar 0b11000" in set_pte(). And let spurious_fault() filter the rest
rare spurious page faults which should be avoided by "ibar".
Besides, we replace the llsc loop with amo in set_pte() which has better
performace, and refactor mmu_context.h to 1) avoid any load/store/branch
instructions between the writing of CSR.ASID & CSR.PGDL, 2) ensure flush
tlb operation is after updating ASID.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add set_direct_map_*() functions for setting the direct map alias for
the page to its default permissions and to an invalid state that cannot
be cached in a TLB. (See d253ca0c3 ("x86/mm/cpa: Add set_direct_map_*()
functions")) Add a similar implementation for LoongArch.
This fixes the KFENCE warnings during hibernation:
==================================================================
BUG: KFENCE: invalid read in swsusp_save+0x368/0x4d8
Invalid read at 0x00000000f7b89a3c:
swsusp_save+0x368/0x4d8
hibernation_snapshot+0x3f0/0x4e0
hibernate+0x20c/0x440
state_store+0x128/0x140
kernfs_fop_write_iter+0x160/0x260
vfs_write+0x2c0/0x520
ksys_write+0x74/0x160
do_syscall+0xb0/0x160
CPU: 0 UID: 0 PID: 812 Comm: bash Tainted: G B 6.11.0-rc1+ #1566
Tainted: [B]=BAD_PAGE
Hardware name: Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.0 10/21/2022
==================================================================
Note: We can only set permissions for KVRANGE/XKVRANGE kernel addresses.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add set_memory_ro/rw/x/nx architecture hooks to change the page
attribution.
Use own set_memory.h rather than generic set_memory.h (i.e.
include/asm-generic/set_memory.h), because we want to add other function
prototypes here.
Note: We can only set attributes for KVRANGE/XKVRANGE kernel addresses.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Probe ISA level, TLB, IOCSR information from CPUCFG to improve kernel
resilience to different core implementations.
BTW, IOCSR register definition appears to be a platform-specific spec
instead of an architecture spec, even for the Loongson CPUs there is no
guarantee that IOCSR will always present.
Thus it's dangerous to perform IOCSR probing without checking CPU type
and instruction availability.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add ACPI BGRT support on LoongArch so it can display image provied by
acpi table at boot stage and switch to graphical UI smoothly.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Currently, many architectures support generic CPU vulnerabilites, such
as x86, arm64 and riscv:
commit 61dc0f555b ("x86/cpu: Implement CPU vulnerabilites sysfs functions")
commit 61ae1321f0 ("arm64: enable generic CPU vulnerabilites support")
commit 0e3f3649d4 ("riscv: Enable generic CPU vulnerabilites support")
All LoongArch CPUs (since Loongson-3A5000) implement a special mechanism
in the processor core to prevent "Meltdown" and "Spectre" attacks, so it
can enable generic CPU vulnerabilites support for LoongArch too.
Without this patch, there are no user interfaces of vulnerabilities to
check on LoongArch. The output of those files reflects the state of the
CPUs in the system, the output value "Not affected" means "CPU is not
affected by the vulnerability".
Before:
# cat /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
cat: /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow: No such file or directory
# cat /sys/devices/system/cpu/vulnerabilities/spec_store_bypass
cat: /sys/devices/system/cpu/vulnerabilities/spec_store_bypass: No such file or directory
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
cat: /sys/devices/system/cpu/vulnerabilities/meltdown: No such file or directory
After:
# cat /sys/devices/system/cpu/vulnerabilities/spec_rstack_overflow
Not affected
# cat /sys/devices/system/cpu/vulnerabilities/spec_store_bypass
Not affected
# cat /sys/devices/system/cpu/vulnerabilities/meltdown
Not affected
Link: https://www.loongson.cn/EN/news/show?id=633
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The drv_priv hooked to mac80211 become as below.
(drv_priv) (instance-0)
+---------------+ +-----------+ +----------------+
| ieee80211_vif | <---> | rtw89_vif | -------> | rtw89_vif_link |
+---------------+ +-----------+ | +----------------+
|
| (instance-1)
| +----------------+
+---> | rtw89_vif_link |
+----------------+
(drv_priv) (instance-0)
+---------------+ +-----------+ +----------------+
| ieee80211_sta | <---> | rtw89_sta | -------> | rtw89_sta_link |
+---------------+ +-----------+ | +----------------+
|
| (instance-1)
| +----------------+
+---> | rtw89_sta_link |
+----------------+
The relation bewteen mac80211 link_id and our link instance is like below.
|\
(link_id) | \
0 -------- | |
1 -------- | | ------ instance-0 (link_id: X) -> work on HW band 0
2 -------- | |
... | | ------ instance-1 (link_id: Y) -> work on HW band 1
14 -------- | |
| /
|/
N.B. For cases of non-MLD connection, we set our link instance-0
active with link_id 0. So, our code flow can be compatible between
non-MLD connection and MLD connection.
Based on above, we tweak entire driver architecture first. But, we don't
dynamically enable multiple links here. That will be handled separately.
Most of the things changed here are changing flows to iterate all active
links and read bss_conf/link_sta data according to target link. And, for
cases of scan, ROC, WOW, we use instance-0 to deal with the request.
There are some things listed below, which work for now but need to extend
before multiple active links.
1. tx path
select suitable link instance among multiple active links
2. rx path
determine rx link by PPDU instead of always link instance-0
3. CAM
apply MLD pairwise key to any active links dynamically
Besides, PS code cannot easily work along with tweaking architecture. With
supporting MLO flag (currently false), we disable PS first and will fix it
by another commit in the following.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-8-pkshih@realtek.com
Refactor STA related functions, e.g. add/assoc/disassoc/disconnect/remove
to separate most link stuffs into sub-functions for MLO reuse.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-7-pkshih@realtek.com
Refactor VIF related functions, e.g. add/remove/assoc/mapping
to separate most link stuffs into sub-functions for MLO reuse.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-6-pkshih@realtek.com
Tweak code to not always access sta->deflink directly. Instead,
according to link_id, read target link_sta from sta->link[].
For now, rtwsta_link->link_id keeps 0. When driver starts to
support MLO, the link_id will be assigned.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-5-pkshih@realtek.com
Tweak code to not always access vif->bss_conf directly. Instead,
according to link_id, read target bss_conf from vif->link_conf[].
For now, rtwvif_link->link_id keeps 0. When driver starts to
support MLO, the link_id will be assigned.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-4-pkshih@realtek.com
This is an intermediate version that is separated from subsequent major
MLO changes, so some functions' namings are not really determined here.
e.g. struct rtw89_sta_link *sta_to_rtwsta_safe(struct ieee80211_sta *sta)
No logic is changed.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-3-pkshih@realtek.com
This is an intermediate version that is separated from subsequent major
MLO changes, so some functions' namings are not really determined here.
e.g. struct rtw89_vif_link *vif_to_rtwvif_safe(struct ieee80211_vif *vif)
No logic is changed.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240916053158.47350-2-pkshih@realtek.com
Fixes a race condition reported here: https://github.com/AsahiLinux/linux/issues/309#issuecomment-2238968609
The whole premise of lockless access to a single-producer-single-
consumer queue is that there is just a single producer and single
consumer. That means we can't call drm_sched_can_queue() (which is
about queueing more work to the hw, not to the spsc queue) from
anywhere other than the consumer (wq).
This call in the producer is just an optimization to avoid scheduling
the consuming worker if it cannot yet queue more work to the hw. It
is safe to drop this optimization to avoid the race condition.
Suggested-by: Asahi Lina <lina@asahilina.net>
Fixes: a78422e9df ("drm/sched: implement dynamic job-flow control")
Closes: https://github.com/AsahiLinux/linux/issues/309
Cc: stable@vger.kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Janne Grunau <j@jannau.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913202301.16772-1-robdclark@gmail.com
DRM's GPU scheduler is arguably in need of more intensive maintenance.
Danilo and Philipp volunteer to help with the maintainership.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916185159.35727-3-pstanner@redhat.com
As we iterate we need to mark that we no longer need iterators -
otherwise we'll infinite loop via the "too many iters" check when
there's many snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
if it doesn't get set we'll never be able to flush the btree write
buffer; this only happens in fake rw mode, but prevents us from shutting
down.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
support for the newly ratified DT property 'assigned-clock-rates-u64'. I'm much
more excited about the support for loading DT overlays from KUnit tests so that
we can test how the clk framework parses DT nodes during clk registration. The
clk framework has some places that are highly DeviceTree dependent so this
charts the path to extend the KUnit tests to cover even more framework code in
the future. I've got some more tests on the list that use the DT overlay
support, but they uncovered issues with clk unregistration that I'm still
working on fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm and
Renesas SoCs, making it fairly usual. Looking closer, there are fixes for
things all over the place, like adding missing clk frequencies or moving
defines for the number of clks out of DT binding headers into the drivers.
There are even conversions of DT bindings to YAML and migration away from
strings to describe clk topology. Overall it doesn't look unusual so I expect
the new drivers to be where we'll have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid them
turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs and
add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel clocks
on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating more
memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to
i.MX7D lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the
i.MXRT1050 driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema
-----BEGIN PGP SIGNATURE-----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=XmiQ
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core clk framework is left largely untouched this time around
except for support for the newly ratified DT property
'assigned-clock-rates-u64'.
I'm much more excited about the support for loading DT overlays from
KUnit tests so that we can test how the clk framework parses DT nodes
during clk registration. The clk framework has some places that are
highly DeviceTree dependent so this charts the path to extend the
KUnit tests to cover even more framework code in the future. I've got
some more tests on the list that use the DT overlay support, but they
uncovered issues with clk unregistration that I'm still working on
fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm
and Renesas SoCs, making it fairly usual. Looking closer, there are
fixes for things all over the place, like adding missing clk
frequencies or moving defines for the number of clks out of DT binding
headers into the drivers. There are even conversions of DT bindings to
YAML and migration away from strings to describe clk topology. Overall
it doesn't look unusual so I expect the new drivers to be where we'll
have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid
them turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs
and add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel
clocks on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating
more memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D
lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the i.MXRT1050
driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits)
clk: Switch back to struct platform_driver::remove()
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
clk: provide devm_clk_get_optional_enabled_with_rate()
clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
clk: renesas: rzv2h: Add support for dynamic switching divider clocks
clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
clk: rockchip: fix error for unknown clocks
clk: rockchip: rk3588: drop unused code
clk: rockchip: Add clock controller for the RK3576
clk: rockchip: Add new pll type pll_rk3588_ddr
dt-bindings: clock, reset: Add support for rk3576
dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
clk: imx95: enable the clock of NETCMIX block control
dt-bindings: clock: add RMII clock selection
dt-bindings: clock: add i.MX95 NETCMIX block control
clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
...
I2C core
========
After 15 years of deprecation, the I2C_COMPAT symbol has finally been
removed. Also client addresses are now locked during initialization to
prevent race conditions between different kinds of instantiation. Scoped
foreach OF child loops are now used. And the testunit has received some
cleanups and documentation improvements as well as two new tests, one
for repeated start and one for triggering SMBusAlert interrupts.
I2C host drivers
================
The DesignWare and the Renesas I2C drivers have received most of
the changes in this pull request.
The first has has undergone through a series of cleanups that
have been sent to the mailing list a year ago for the first time
and finally get merged in this pull request. They are many, from
typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move
inline functions to librarieas) and many others.
Besides that, all the DesignWare Kconfig options have been
grouped under the I2C_DESIGNWARE_CORE and this required some
adaptation in many of the kernel configuration files for
different arm and mips boards.
Follows the list of the rest of the changes grouped by type of
change.
Cleanups
--------
The Qualcomm Geni platform improves the exit path in the runtime
resume function.
The Intel LJCA driver loses "target_addr" parameter in
ljca_i2c_stop() because it was unused.
The MediaTek controller intializes the restart_flag in the
transfer function using the ternary conditional operator ("? :")
instead of initializing it in different parts.
Constified a few global data structures in the virtio driver.
The Renesas driver simplifies the bus speed handling in the init
function making it more readable.
Improved an if/else statement in probe function of the Renesas
R-Car driver.
The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead
of SET_RUNTIME_PM_OPS().
Still in the iMX/MXC driver a comma ',' has been replaced by a
semicolon ';', while in different drivers the ',' has been
removed from the '{ }' delimiters.
Finally three devm_clk_get_enabled() have been used to simplify
the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2,
Ingenic and MPC drivers.
Refactors
---------
The Nuvoton fixes a potential out of boundary array access. This
is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The
change makes the driver more future proof and, at the same time,
silences code analyzers.
Improvements
------------
The Renesas I2C (riic) driver undergoes several patches improving
the runtime power management handling.
The Intel i801 driver uses a more descriptive adapter's name to
show the presence of the IDF feature.
In the Intel Denverton (ismt) adapter the pending transactions
are killed when irq's can't complete their handling, triggering a
timeout. This could have been considered as a bug fix, but
because, standing to Vasily, it's very sporadic, I preferred
considering the patch rather as an improvement.
New Feature
-----------
The Renesas I2C (riic) driver now supports the fast mode plus.
New support
-----------
Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
The Keba comes with a new driver, i2c-keba.c.
The Mule is an i2c multiplexer and it also comes with a new
driver, mux/i2c-mux-mule.c.
Core patch
----------
This pull request includes also a patch in the I2C framework, in
i2c-core-base.c where the runtime PM functions have been replaced
in order to allow to be accessed during the device add.
Devicetree
----------
Some cleanups in the devicetree, as well. nVidia and Qualcomm
bindings improve their "if:then:" blocks. While the aspeed
binding loses the "multi-master" property because it was
redundant.
The i2c-sprd binding has been converted to YAML.
AT24 updates
============
- document a new model from giantec in DT bindings
-----BEGIN PGP SIGNATURE-----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=DTNY
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C core:
- finally remove the I2C_COMPAT symbol after 15 years of deprecation
- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation
- use scoped foreach OF child loops
- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts
I2C host drivers:
- DesignWare and Renesas I2C driver updates.
The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.
- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards
Cleanups:
- improve the exit path in the runtime resume function for the
Qualcomm Geni platform
- get rid of the unused "target_addr" parameter in the Intel LJCA
driver
- intialize the restart_flag in the MediaTek controller in one single
place
- constify a few global data structures in the virtio driver
- simplify the bus speed handling in the Renesas driver init function
making it more readable
- improved probe function of the Renesas R-Car driver
- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()
- iMX/MXC driver cleanups
- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers
Refactoring:
- Fix a potential out of boundary array access in the Nuvoton driver.
This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.
Improvements:
- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver
- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature
- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout
New Feature:
- support fast mode plus in the Renesas I2C (riic) driver
New support:
- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
- new i2c-keba.c driver
- new driver for The Mule i2c multiplexer
Core I2C framework:
- move runtime PM functions in order to allow them to be accessed
during device add
Devicetree:
- nVidia and Qualcomm binding improvements
- get rid of redundant "multi-master" property in the aspeed binding
- convert i2c-sprd binding to YAML
AT24 updates:
- document a new model from giantec in DT bindings"
* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...
* Use Open Firmware helper routines
* Fix memory leak when nvdimm labels are incorrect
* remove some dead code
-----BEGIN PGP SIGNATURE-----
iIkEABYKADIWIQSgX9xt+GwmrJEQ+euebuN7TNx1MQUCZvCawRQcaXJhLndlaW55
QGludGVsLmNvbQAKCRCebuN7TNx1Mee0APdJJHx2GJtfKYyLCufjqbLkFvd6FXBQ
h+KzGJuyXjIPAP9wlDdMA1uReR0jQ25zbTh1UKNIeaXH/rf5B/S2BTT3Cw==
=7wOJ
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny:
- use Open Firmware helper routines
- fix memory leak when nvdimm labels are incorrect
- remove some dead code
* tag 'libnvdimm-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Remove dead code for ENODEV checking in scan_labels()
nvdimm: Fix devs leaks in scan_labels()
nvdimm: Use of_property_present() and of_property_read_bool()
-----BEGIN PGP SIGNATURE-----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=9M/C
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight update from Lee Jones:
- Added a check for the return value of spi_setup() in the l4f00242t03
driver to catch errors
* tag 'backlight-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: l4f00242t03: Add check for spi_setup
- Fixed device child node usage in the BD2606MVV and PCA995x drivers.
- Used device_for_each_child_node_scoped() to access child nodes in the IS31FL319X driver.
- Reset the LED controller during the probe in the LM3601X driver.
- Used device_for_each_child_node() to access device child nodes in the PCA995X driver.
- Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver.
- Replaced msleep() with usleep_range() in the SUN50I-A100 driver.
- Used scoped device node handling to simplify error paths in the AAT1290, KTD2692, and MC13783 drivers.
- Added missing of_node_get for probe duration in the MAX77693 driver.
- Simplified using for_each_available_child_of_node_scoped() loops when iterating over device nodes.
- Used devm_clk_get_enabled() helpers in the LP55XX driver.
- Converted DT bindings from TXT to YAML format for various drivers, including LM3692x and SC2731-BLTC.
- Set num_leds after allocation in the GPIO driver.
- Removed irrelevant blink configuration error message in the PCA9532 driver.
- Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris Omnia driver.
-----BEGIN PGP SIGNATURE-----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=a/t6
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
- Limited LED current based on thermal conditions in the QCOM flash LED
driver
- Fixed device child node usage in the BD2606MVV and PCA995x drivers
- Used device_for_each_child_node_scoped() to access child nodes in the
IS31FL319X driver
- Reset the LED controller during the probe in the LM3601X driver
- Used device_for_each_child_node() to access device child nodes in the
PCA995X driver
- Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver
- Replaced msleep() with usleep_range() in the SUN50I-A100 driver
- Used scoped device node handling to simplify error paths in the
AAT1290, KTD2692, and MC13783 drivers
- Added missing of_node_get for probe duration in the MAX77693 driver
- Simplified using for_each_available_child_of_node_scoped() loops when
iterating over device nodes
- Used devm_clk_get_enabled() helpers in the LP55XX driver
- Converted DT bindings from TXT to YAML format for various drivers,
including LM3692x and SC2731-BLTC
- Set num_leds after allocation in the GPIO driver
- Removed irrelevant blink configuration error message in the PCA9532
driver
- Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris
Omnia driver
* tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (38 commits)
leds: turris-omnia: Fix module autoloading with MODULE_DEVICE_TABLE()
leds: pca9532: Remove irrelevant blink configuration error message
leds: gpio: Set num_leds after allocation
dt-bindings: leds: Convert leds-lm3692x to YAML format
leds: lp55xx: Use devm_clk_get_enabled() helpers
leds: as3645a: Use device_* to iterate over device child nodes
leds: qcom-lpg: Simplify with scoped for each OF child loop
leds: turris-omnia: Simplify with scoped for each OF child loop
leds: sc27xx: Simplify with scoped for each OF child loop
leds: pca9532: Simplify with scoped for each OF child loop
leds: netxbig: Simplify with scoped for each OF child loop
leds: mt6323: Simplify with scoped for each OF child loop
leds: mc13783: Use scoped device node handling to simplify error paths
leds: lp55xx: Simplify with scoped for each OF child loop
leds: is31fl32xx: Simplify with scoped for each OF child loop
leds: bcm6358: Simplify with scoped for each OF child loop
leds: bcm6328: Simplify with scoped for each OF child loop
leds: aw2013: Simplify with scoped for each OF child loop
leds: 88pm860x: Simplify with scoped for each OF child loop
leds: max77693: Simplify with scoped for each OF child loop
...
- Added parsing of GPIO hogs for the ADP5585.
- Fixed module autoloading in the MAX14577 driver.
- Simplified and cleaned up the CROS_EC driver.
- Made the Lenovo Yoga Tab 3 X90F DMI match less strict in the INTEL_SOC_PMIC_CHTWC driver.
- Added support for the RK806 PMIC on the I2C bus.
- Removed the remaining header file for the DS1WM driver.
- Added compatible strings for various devices in the device tree bindings.
- Fixed a comma-related issue in the 88PM860X_CORE driver.
- Constified read-only regmap structs in various drivers.
- Used scoped variables with memory allocators to simplify error paths in the MT6360 and SYSCON drivers.
- Added Intel Arrow Lake-H and Panther Lake LPSS PCI IDs.
-----BEGIN PGP SIGNATURE-----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=WuEO
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Added support for the Analog Devices ADP5585 GPIO and PWM functions
- Added parsing of GPIO hogs for the ADP5585
- Fixed module autoloading in the MAX14577 driver
- Simplified and cleaned up the CROS_EC driver
- Made the Lenovo Yoga Tab 3 X90F DMI match less strict in the
INTEL_SOC_PMIC_CHTWC driver
- Added support for the RK806 PMIC on the I2C bus
- Removed the remaining header file for the DS1WM driver
- Added compatible strings for various devices in the device tree
bindings
- Fixed a comma-related issue in the 88PM860X_CORE driver
- Constified read-only regmap structs in various drivers
- Used scoped variables with memory allocators to simplify error paths
in the MT6360 and SYSCON drivers
- Added Intel Arrow Lake-H and Panther Lake LPSS PCI IDs
* tag 'mfd-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
mfd: atc260x: Convert a bunch of commas to semicolons
dt-bindings: mfd: qcom,tcsr: Add compatible for sa8775p
mfd: intel-lpss: Add Intel Panther Lake LPSS PCI IDs
mfd: intel-lpss: Add Intel Arrow Lake-H LPSS PCI IDs
dt-bindings: mfd: syscon: Add rk3576 QoS register compatible
dt-bindings: mfd: adp5585: Add parsing of hogs
mfd: tc3589x: Drop vendorless compatible string from match table
mfd: qcom-spmi-pmic: Use for_each_child_of_node_scoped()
mfd: max77620: Use for_each_child_of_node_scoped()
mfd: intel_soc_pmic_chtwc: Make Lenovo Yoga Tab 3 X90F DMI match less strict
mfd: cros_ec: Update module description
mfd: cros_ec: Simplify and clean-up cros_ec_dev_init()
mfd: max14577: Provide MODULE_DEVICE_TABLE() to fix module autoloading
mfd: rk8xx: Add support for rk806 on i2c bus
dt-bindings: mfd: syscon: Add ti,j784s4-acspcie-proxy-ctrl compatible
mfd: ds1wm: Remove remaining header file
MAINTAINERS: Repair file entry in MARVELL 88PM886 PMIC DRIVER
mfd: 88pm860x-core: Convert comma to semicolon
mfd: syscon: Use scoped variables with memory allocators to simplify error paths
mfd: mt6360: Use scoped variables with memory allocators to simplify error paths
...
New support:
- Support for AMD Versal Gen 2 DMA IP
- Rcar RZ/G3S SoC dma controller
- Support for Intel Diamond Rapids and Granite Rapids-D dma controllers
- Support for Freescale ls1021a-qdma controller
- New driver for Loongson-1 APB DMA
- New driver for AMD QDMA
- Pl08x in LPC32XX router dma driver
Updates:
- Support for dpdma cyclic dma mode
- XML conversion for marvell xor dma bindings
- Dma clocks documentation for imx dma
-----BEGIN PGP SIGNATURE-----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=beF+
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Unusually, more new driver and device support than updates. Couple of
new device support, AMD, Rcar, Intel and New drivers in Freescale,
Loonsoon, AMD and LPC32XX with DT conversion and mode updates etc.
New support:
- Support for AMD Versal Gen 2 DMA IP
- Rcar RZ/G3S SoC dma controller
- Support for Intel Diamond Rapids and Granite Rapids-D dma controllers
- Support for Freescale ls1021a-qdma controller
- New driver for Loongson-1 APB DMA
- New driver for AMD QDMA
- Pl08x in LPC32XX router dma driver
Updates:
- Support for dpdma cyclic dma mode
- XML conversion for marvell xor dma bindings
- Dma clocks documentation for imx dma"
* tag 'dmaengine-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits)
dmaengine: loongson1-apb-dma: Fix the build warning caused by the size of pdev_irqname
dmaengine: Fix spelling mistakes
dmaengine: Add dma router for pl08x in LPC32XX SoC
dmaengine: fsl-edma: add edma src ID check at request channel
dmaengine: fsl-edma: change to guard(mutex) within fsl_edma3_xlate()
dmaengine: avoid non-constant format string
dmaengine: imx-dma: Remove i.MX21 support
dt-bindings: dma: fsl,imx-dma: Document the DMA clocks
dmaengine: Loongson1: Add Loongson-1 APB DMA driver
dt-bindings: dma: Add Loongson-1 APB DMA
dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP
dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string
dmaengine: idxd: Add new DSA and IAA device IDs for Diamond Rapids platform
dmaengine: idxd: Add a new DSA device ID for Granite Rapids-D platform
dmaengine: ti: k3-udma: Remove unused declarations
dmaengine: amd: qdma: Add AMD QDMA driver
dmaengine: xilinx: dpdma: Add support for cyclic dma mode
dma: ipu: Remove include/linux/dma/ipu-dma.h
dt-bindings: dma: fsl-mxs-dma: Add compatible string "fsl,imx8qxp-dma-apbh"
dt-bindings: fsl-qdma: allow compatible string fallback to fsl,ls1021a-qdma
...
- New Support
- Rcar usb2 support for RZ/G3S SoC
- Nuvoton MA35 SoC USB 2.0 PHY driver
- Removal
- obsolete qcom,usb-8x16-phy bindings
- Updates
- 4 lane PCIe support for Qualcomm X1E80100
- Constify structure in subsystem update
- Subsystem simplification with scoped for each OF child loop update
- Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy
bindings
-----BEGIN PGP SIGNATURE-----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=XJmz
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New hw support:
- Rcar usb2 support for RZ/G3S SoC
- Nuvoton MA35 SoC USB 2.0 PHY driver
Removed:
- obsolete qcom,usb-8x16-phy bindings
Updates:
- 4 lane PCIe support for Qualcomm X1E80100
- Constify structure in subsystem update
- Subsystem simplification with scoped for each OF child loop update
- Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy
bindings"
* tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits)
phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings
phy: renesas: rcar-gen3-usb2: Add support to initialize the bus
phy: ti: j721e-wiz: Simplify with scoped for each OF child loop
phy: ti: j721e-wiz: Drop OF node reference earlier for simpler code
phy: ti: gmii-sel: Simplify with dev_err_probe()
phy: ti: am654-serdes: Use scoped device node handling to simplify error paths
phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loop
phy: mediatek: xsphy: Simplify with scoped for each OF child loop
phy: mediatek: tphy: Simplify with scoped for each OF child loop
phy: hisilicon: usb2: Simplify with scoped for each OF child loop
phy: cadence: sierra: Simplify with scoped for each OF child loop
phy: broadcom: brcm-sata: Simplify with scoped for each OF child loop
phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loop
phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY
dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings
phy: qcom: qmp-pcie: Configure all tables on port B PHY
phy: airoha: adjust initialization delay in airoha_pcie_phy_init()
dt-bindings: phy: socionext,uniphier: add top-level constraints
phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100
...
- bus cleanup for warnings and probe deferral errors suppression
- cadence recheck for status with a delayed work
- intel interrupt rework on reset exit
-----BEGIN PGP SIGNATURE-----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=Xwb2
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- bus cleanup for warnings and probe deferral errors suppression
- cadence recheck for status with a delayed work
- intel interrupt rework on reset exit
* tag 'soundwire-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_bus_common: enable interrupts before exiting reset
soundwire: cadence: re-check Peripheral status with delayed_work
soundwire: bus: clean up probe warnings
soundwire: bus: drop unused driver name field
soundwire: bus: suppress probe deferral errors
Core changes:
- Add support for "input-schmitt-microvolt" property, as used in the
Sophgo SoC.
New drivers:
- Mobileye EyeQ5 pin controller, I think this is an automotive SoC.
- Rockchip rk3576 pin control support.
- Sophgo CV1800 series pin controllers: CV1800B, CV1812H and SG2000.
Improvements:
- Gradual improvements to Renesas, Samsung, Qualcomm, Nuvoton
and a few other drivers.
-----BEGIN PGP SIGNATURE-----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=7uZC
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Add support for "input-schmitt-microvolt" property, as used in the
Sophgo SoC
New drivers:
- Mobileye EyeQ5 pin controller, I think this is an automotive SoC
- Rockchip rk3576 pin control support
- Sophgo CV1800 series pin controllers: CV1800B, CV1812H and SG2000
Improvements:
- Gradual improvements to Renesas, Samsung, Qualcomm, Nuvoton and a
few other drivers"
* tag 'pinctrl-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (67 commits)
pinctrl: intel: Constify struct intel_pinctrl parameter
pinctrl: Remove redundant null pointer checks in pinctrl_remove_device_debugfs()
pinctrl: baytrail: Drop duplicate return statement
pinctrl: intel: Inline intel_gpio_community_irq_handler()
dt-bindings: pinctrl: qcom: add missing type to GPIO hogs
pinctrl: madera: Simplify with dev_err_probe()
pinctrl: k210: Use devm_clk_get_enabled() helpers
pinctrl: Join split messages and remove double whitespace
pinctrl: renesas: rzg2l: Move pinconf_to_config_argument() call outside of switch cases
pinctrl: renesas: rzg2l: Introduce single macro for digital noise filter configuration
pinctrl: renesas: rzg2l: Replace of_node_to_fwnode() with more suitable API
pinctrl: mvebu: Fix devinit_dove_pinctrl_probe function
pinctrl: sunxi: Use devm_clk_get_enabled() helpers
pinctrl: sophgo: cv18xx: fix missed __iomem type identifier
pinctrl: stmfx: Use string_choices API instead of ternary operator
pinctrl: nomadik: Use kmemdup_array instead of kmemdup for multiple allocation
pinctrl: intel: Introduce for_each_intel_gpio_group() helper et al.
pinctrl: intel: Constify intel_get_community() returned object
pinctrl: intel: Implement high impedance support
pinctrl: intel: Add __intel_gpio_get_direction() helper
...
