Use "/*" instead of "/**" for common C comments to prevent warnings
from scripts/kernel-doc.
ntb_hw_epf.c:15: warning: expecting prototype for Host side endpoint driver to implement Non(). Prototype was for NTB_EPF_COMMAND() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: ntb@lists.linux.dev
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Fix all kernel-doc warnings in ntb_transport.c.
The function parameters for ntb_transport_create_queue() changed, so
update them in the kernel-doc comments.
Add a Returns: comment for ntb_transport_register_client_dev().
ntb_transport.c:382: warning: No description found for return value of 'ntb_transport_register_client_dev'
ntb_transport.c:1984: warning: Excess function parameter 'rx_handler' description in 'ntb_transport_create_queue'
ntb_transport.c:1984: warning: Excess function parameter 'tx_handler' description in 'ntb_transport_create_queue'
ntb_transport.c:1984: warning: Excess function parameter 'event_handler' description in 'ntb_transport_create_queue'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: ntb@lists.linux.dev
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
'struct bus_type' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
69682 4593 152 74427 122bb drivers/ntb/ntb_transport.o
5847 448 32 6327 18b7 drivers/ntb/core.o
After:
=====
text data bss dec hex filename
69858 4433 152 74443 122cb drivers/ntb/ntb_transport.o
6007 288 32 6327 18b7 drivers/ntb/core.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
The correct printk format is %pa or %pap, but not %pa[p].
Fixes: 99a0605612 ("NTB: ntb_perf: Fix address err in perf_copy_chunk")
Signed-off-by: Max Hawking <maxahawking@sonnenkinder.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
The debugfs_create_dir() function returns error pointers.
It never returns NULL. So use IS_ERR() to check it.
Fixes: e26a5843f7 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
On RISCV64 Qemu machine with 512MB memory, cmdline "crashkernel=500M,high"
will cause system stall as below:
Zone ranges:
DMA32 [mem 0x0000000080000000-0x000000009fffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080000000-0x000000008005ffff]
node 0: [mem 0x0000000080060000-0x000000009fffffff]
Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff]
(stall here)
commit 5d99cadf1568 ("crash: fix x86_32 crash memory reserve dead loop
bug") fix this on 32-bit architecture. However, the problem is not
completely solved. If `CRASH_ADDR_LOW_MAX = CRASH_ADDR_HIGH_MAX` on 64-bit
architecture, for example, when system memory is equal to
CRASH_ADDR_LOW_MAX on RISCV64, the following infinite loop will also occur:
-> reserve_crashkernel_generic() and high is true
-> alloc at [CRASH_ADDR_LOW_MAX, CRASH_ADDR_HIGH_MAX] fail
-> alloc at [0, CRASH_ADDR_LOW_MAX] fail and repeatedly
(because CRASH_ADDR_LOW_MAX = CRASH_ADDR_HIGH_MAX).
As Catalin suggested, do not remove the ",high" reservation fallback to
",low" logic which will change arm64's kdump behavior, but fix it by
skipping the above situation similar to commit d2f32f23190b ("crash: fix
x86_32 crash memory reserve dead loop").
After this patch, it print:
cannot allocate crashkernel (size:0x1f400000)
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20240812062017.2674441-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The SBI v2.0 specification pointed to by the link below reserves the
event code 0xffff for platform specific firmware events. Update the driver
to be able to parse and program such events. The platform specific
firmware events must now be specified in the perf command as below:
perf stat -e rCxxx ...
where bits[63:62] = 0x3 of the event config indicate a platform specific
firmware event and xxx indicate the actual event code which is passed
as the event data.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Link: https://github.com/riscv-non-isa/riscv-sbi-doc/releases/download/v2.0/riscv-sbi.pdf
Link: https://lore.kernel.org/r/20240812051109.6496-1-mchitale@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Charlie Jenkins <charlie@rivosinc.com> says:
Add support for riscv specific barrier implementations to the tools
tree, so that fence instructions can be emitted for synchronization.
* b4-shazam-merge:
tools: Optimize ring buffer for riscv
tools: Add riscv barrier implementation
Link: https://lore.kernel.org/r/20240806-optimize_ring_buffer_read_riscv-v2-0-ca7e193ae198@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Change my contact email in MAINTAINERS and .mailmap to my kernel.org.
This in order to avoid cumbersome corporate email policies.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Previously the MR and SCR registers were just set with the supposedly
required values, from cached register values (cached reg content
initialized to zero).
All parts fixed here did not consider the current register (cache)
content, which would make future support of cs_setup, cs_hold, and
cs_inactive impossible.
Setting SCBR in atmel_qspi_setup() erases a possible DLYBS setting from
atmel_qspi_set_cs_timing(). The DLYBS setting is applied by ORing over
the current setting, without resetting the bits first. All writes to MR
did not consider possible settings of DLYCS and DLYBCT.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Fixes: f732646d0c ("spi: atmel-quadspi: Add support for configuring CS timing")
Link: https://patch.msgid.link/20240918082744.379610-2-ada@thorsis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Makes pseries_eeh_err_inject() available even when debugfs
is disabled (CONFIG_DEBUG_FS=n). It moves eeh_debugfs_break_device()
and eeh_pe_inject_mmio_error() out of the CONFIG_DEBUG_FS block
and renames it as eeh_break_device().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409170509.VWC6jadC-lkp@intel.com/
Fixes: b0e2b828df ("powerpc/pseries/eeh: Fix pseries_eeh_err_inject")
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240917132445.3868016-1-nnmlinux@linux.ibm.com
In terms of normal application usage, this list will always be empty.
And if an application does overflow a bit, it'll have a few entries.
However, nothing obviously prevents syzbot from running a test case
that generates a ton of overflow entries, and then flushing them can
take quite a while.
Check for needing to reschedule while flushing, and drop our locks and
do so if necessary. There's no state to maintain here as overflows
always prune from head-of-list, hence it's fine to drop and reacquire
the locks at the end of the loop.
Link: https://lore.kernel.org/io-uring/66ed061d.050a0220.29194.0053.GAE@google.com/
Reported-by: syzbot+5fca234bd7eb378ff78e@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Many of the other architectures use their custom barrier implementations.
Use the barrier code from the kernel sources to optimize barriers in
tools.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240806-optimize_ring_buffer_read_riscv-v2-1-ca7e193ae198@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
I recently ended up with a warning on some compilers along the lines of
CC kernel/resource.o
In file included from include/linux/ioport.h:16,
from kernel/resource.c:15:
kernel/resource.c: In function 'gfr_start':
include/linux/minmax.h:49:37: error: conversion from 'long long unsigned int' to 'resource_size_t' {aka 'unsigned int'} changes value from '17179869183' to '4294967295' [-Werror=overflow]
49 | ({ type ux = (x); type uy = (y); __cmp(op, ux, uy); })
| ^
include/linux/minmax.h:52:9: note: in expansion of macro '__cmp_once_unique'
52 | __cmp_once_unique(op, type, x, y, __UNIQUE_ID(x_), __UNIQUE_ID(y_))
| ^~~~~~~~~~~~~~~~~
include/linux/minmax.h:161:27: note: in expansion of macro '__cmp_once'
161 | #define min_t(type, x, y) __cmp_once(min, type, x, y)
| ^~~~~~~~~~
kernel/resource.c:1829:23: note: in expansion of macro 'min_t'
1829 | end = min_t(resource_size_t, base->end,
| ^~~~~
kernel/resource.c: In function 'gfr_continue':
include/linux/minmax.h:49:37: error: conversion from 'long long unsigned int' to 'resource_size_t' {aka 'unsigned int'} changes value from '17179869183' to '4294967295' [-Werror=overflow]
49 | ({ type ux = (x); type uy = (y); __cmp(op, ux, uy); })
| ^
include/linux/minmax.h:52:9: note: in expansion of macro '__cmp_once_unique'
52 | __cmp_once_unique(op, type, x, y, __UNIQUE_ID(x_), __UNIQUE_ID(y_))
| ^~~~~~~~~~~~~~~~~
include/linux/minmax.h:161:27: note: in expansion of macro '__cmp_once'
161 | #define min_t(type, x, y) __cmp_once(min, type, x, y)
| ^~~~~~~~~~
kernel/resource.c:1847:24: note: in expansion of macro 'min_t'
1847 | addr <= min_t(resource_size_t, base->end,
| ^~~~~
cc1: all warnings being treated as errors
which looks like a real problem: our phys_addr_t is only 32 bits now, so
having 34-bit masks is just going to result in overflows.
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240731162159.9235-2-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, only acpi_early_node_map[0] was initialized to NUMA_NO_NODE.
To ensure all the values were properly initialized, switch to initialize
all of them to NUMA_NO_NODE.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> (arm64 platform)
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240729035958.1957185-1-haibo1.xu@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
During adp5588_setup(), we read all the events to clear the event FIFO.
However, adp5588_read() just calls i2c_smbus_read_byte_data() which
returns the byte read in case everything goes well. Hence, we need to
explicitly check for a negative error code instead of checking for
something different than 0.
Fixes: e960309ce3 ("Input: adp5588-keys - bail out on returned error")
Cc: stable@vger.kernel.org
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240920-fix-adp5588-err-check-v1-1-81f6e957ef24@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Condsider the following call sequence:
/* Upper layer */
dma_fence_begin_signalling();
lock(tainted_shared_lock);
/* Driver callback */
dma_fence_begin_signalling();
...
The driver might here use a utility that is annotated as intended for the
dma-fence signalling critical path. Now if the upper layer isn't correctly
annotated yet for whatever reason, resulting in
/* Upper layer */
lock(tainted_shared_lock);
/* Driver callback */
dma_fence_begin_signalling();
We will receive a false lockdep locking order violation notification from
dma_fence_begin_signalling(). However entering a dma-fence signalling
critical section itself doesn't block and could not cause a deadlock.
So use a successful read_trylock() annotation instead for
dma_fence_begin_signalling(). That will make sure that the locking order
is correctly registered in the first case, and doesn't register any
locking order in the second case.
The alternative is of course to make sure that the "Upper layer" is always
correctly annotated. But experience shows that's not easily achievable
in all cases.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428125233.228353-1-thomas.hellstrom@linux.intel.com
When called from sbitmap_queue_get(), sbitmap_deferred_clear() may be run
with preempt disabled. In RT kernel, spin_lock() can sleep, then warning
of "BUG: sleeping function called from invalid context" can be triggered.
Fix it by replacing it with raw_spin_lock.
Cc: Yang Yang <yang.yang@vivo.com>
Fixes: 72d04bdcf3 ("sbitmap: fix io hung due to race on sbitmap_word::cleared")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yang Yang <yang.yang@vivo.com>
Link: https://lore.kernel.org/r/20240919021709.511329-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_limits_io_min and blk_limits_io_opt are unused since the
recent commit
0a94a469a4 ("dm: stop using blk_limits_io_{min,opt}")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240920004817.676216-1-linux@treblig.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Right now any link trace is listed as being linked after the head
request in the chain, but it's more useful to note explicitly which
request a given new request is chained to. Change the link trace to dump
the tail request so that chains are immediately apparent when looking at
traces.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After twenty years of development we finally reached the point to enable
PREEMPT_RT support in the mainline kernel.
All prerequisites are merged, so enable it on the supported architectures
ARM64, RISCV and X86(32/64-bit).
-----BEGIN PGP SIGNATURE-----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=+vJ6
-----END PGP SIGNATURE-----
Merge tag 'sched-rt-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RT enablement from Thomas Gleixner:
"Enable PREEMPT_RT on supported architectures:
After twenty years of development we finally reached the point to
enable PREEMPT_RT support in the mainline kernel.
All prerequisites are merged, so enable it on the supported
architectures ARM64, RISCV and X86(32/64-bit)"
* tag 'sched-rt-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
riscv: Allow to enable PREEMPT_RT.
arm64: Allow to enable PREEMPT_RT.
x86: Allow to enable PREEMPT_RT.
RX DCK stands for receiver DC calibration. The v1 format adds a field to
indicate the calibration is for operation channel or an average value for
all scanning channels. Update the format accordingly, and increase
firmware format sequence to 2.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240913071340.41822-3-pkshih@realtek.com
Don't populate the read-only arrays params, toshiba_smid1, toshiba_smid2,
samsung_smid and lenovo_smid on the stack at run time, instead make them
static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240912135335.590464-1-colin.i.king@gmail.com
The append operation was introduced in
commit b1a1a1a09b ("kbuild: lto: postpone objtool")
when the command was created from two parts.
In commit 850ded46c6 ("kbuild: Fix TRIM_UNUSED_KSYMS with LTO_CLANG")
however the first part was removed again, making the append operation
unnecessary.
To keep this command definition aligned with all other command
definitions, remove the append again.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, every expression in Kconfig files produces a new abstract
syntax tree (AST), even if it is identical to a previously encountered
one.
Consider the following code:
config FOO
bool "FOO"
depends on (A || B) && C
config BAR
bool "BAR"
depends on (A || B) && C
config BAZ
bool "BAZ"
depends on A || B
The "depends on" lines are similar, but currently a separate AST is
allocated for each one.
The current data structure looks like this:
FOO->dep ==> AND BAR->dep ==> AND BAZ->dep ==> OR
/ \ / \ / \
OR C OR C A B
/ \ / \
A B A B
This is redundant; FOO->dep and BAR->dep have identical ASTs but
different memory instances.
We can optimize this; FOO->dep and BAR->dep can share the same AST, and
BAZ->dep can reference its sub tree.
The optimized data structure looks like this:
FOO->dep, BAR->dep ==> AND
/ \
BAZ->dep ==> OR C
/ \
A B
This commit introduces a hash table to keep track of allocated
expressions. If an identical expression is found, it is reused.
This does not necessarily result in memory savings, as menu_finalize()
transforms expressions without freeing up stale ones. This will be
addressed later.
One optimization that can be easily implemented is caching the
expression's value. Once FOO's dependency, (A || B) && C, is calculated,
it can be cached, eliminating the need to recalculate it for BAR.
This commit also reverts commit e983b7b17a ("kconfig/menu.c: fix
multiple references to expressions in menu_add_prop()").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, expr_eliminate_dups() passes two identical pointers down to
expr_eliminate_dups1(), which later skips processing identical leaves.
This approach is somewhat tricky and, more importantly, it will not work
with the refactoring made in the next commit.
This commit slightly changes the recursion logic; it deduplicates both
the left and right arms, and then passes them to expr_eliminate_dups1().
expr_eliminate_dups() should produce the same result.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This function was originally added by commit 8af27e1dc4 ("fixdep: use
hash table instead of a single array").
Move it to scripts/include/ so that other host programs can use it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
After commit 64e166099b ("kallsyms: get rid of code for absolute,
kallsyms"), there is only one call site for output_address(). Squash it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When CONFIG_BUILTIN_MODULE_RANGES is enabled, the modules.builtin.ranges
file should be installed in the module install location.
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Nick Alcock <nick.alcock@oracle.com>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The modules.builtin.ranges offset range data for builtin modules is
generated at compile time based on the list of built-in modules and
the vmlinux.map and vmlinux.o.map linker maps. This data can be used
to determine whether a symbol at a particular address belongs to
module code that was configured to be compiled into the kernel proper
as a built-in module (rather than as a standalone module).
This patch adds a script that uses the generated modules.builtin.ranges
data to annotate the symbols in the System.map with module names if
their address falls within a range that belongs to one or more built-in
modules.
It then processes the vmlinux.map (and if needed, vmlinux.o.map) to
verify the annotation:
- For each top-level section:
- For each object in the section:
- Determine whether the object is part of a built-in module
(using modules.builtin and the .*.cmd file used to compile
the object as suggested in [0])
- For each symbol in that object, verify that the built-in
module association (or lack thereof) matches the annotation
given to the symbol.
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Create file module.builtin.ranges that can be used to find where
built-in modules are located by their addresses. This will be useful for
tracing tools to find what functions are for various built-in modules.
The offset range data for builtin modules is generated using:
- modules.builtin: associates object files with module names
- vmlinux.map: provides load order of sections and offset of first member
per section
- vmlinux.o.map: provides offset of object file content per section
- .*.cmd: build cmd file with KBUILD_MODFILE
The generated data will look like:
.text 00000000-00000000 = _text
.text 0000baf0-0000cb10 amd_uncore
.text 0009bd10-0009c8e0 iosf_mbi
...
.text 00b9f080-00ba011a intel_skl_int3472_discrete
.text 00ba0120-00ba03c0 intel_skl_int3472_discrete intel_skl_int3472_tps68470
.text 00ba03c0-00ba08d6 intel_skl_int3472_tps68470
...
.data 00000000-00000000 = _sdata
.data 0000f020-0000f680 amd_uncore
For each ELF section, it lists the offset of the first symbol. This can
be used to determine the base address of the section at runtime.
Next, it lists (in strict ascending order) offset ranges in that section
that cover the symbols of one or more builtin modules. Multiple ranges
can apply to a single module, and ranges can be shared between modules.
The CONFIG_BUILTIN_MODULE_RANGES option controls whether offset range data
is generated for kernel modules that are built into the kernel image.
How it works:
1. The modules.builtin file is parsed to obtain a list of built-in
module names and their associated object names (the .ko file that
the module would be in if it were a loadable module, hereafter
referred to as <kmodfile>). This object name can be used to
identify objects in the kernel compile because any C or assembler
code that ends up into a built-in module will have the option
-DKBUILD_MODFILE=<kmodfile> present in its build command, and those
can be found in the .<obj>.cmd file in the kernel build tree.
If an object is part of multiple modules, they will all be listed
in the KBUILD_MODFILE option argument.
This allows us to conclusively determine whether an object in the
kernel build belong to any modules, and which.
2. The vmlinux.map is parsed next to determine the base address of each
top level section so that all addresses into the section can be
turned into offsets. This makes it possible to handle sections
getting loaded at different addresses at system boot.
We also determine an 'anchor' symbol at the beginning of each
section to make it possible to calculate the true base address of
a section at runtime (i.e. symbol address - symbol offset).
We collect start addresses of sections that are included in the top
level section. This is used when vmlinux is linked using vmlinux.o,
because in that case, we need to look at the vmlinux.o linker map to
know what object a symbol is found in.
And finally, we process each symbol that is listed in vmlinux.map
(or vmlinux.o.map) based on the following structure:
vmlinux linked from vmlinux.a:
vmlinux.map:
<top level section>
<included section> -- might be same as top level section)
<object> -- built-in association known
<symbol> -- belongs to module(s) object belongs to
...
vmlinux linked from vmlinux.o:
vmlinux.map:
<top level section>
<included section> -- might be same as top level section)
vmlinux.o -- need to use vmlinux.o.map
<symbol> -- ignored
...
vmlinux.o.map:
<section>
<object> -- built-in association known
<symbol> -- belongs to module(s) object belongs to
...
3. As sections, objects, and symbols are processed, offset ranges are
constructed in a straight-forward way:
- If the symbol belongs to one or more built-in modules:
- If we were working on the same module(s), extend the range
to include this object
- If we were working on another module(s), close that range,
and start the new one
- If the symbol does not belong to any built-in modules:
- If we were working on a module(s) range, close that range
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Unfortunately when we migrated the lifecycle management of the key LSM
blob to the LSM framework we forgot to convert the security_watch_key()
callbacks for SELinux and Smack. This patch corrects this by making use
of the selinux_key() and smack_key() helper functions respectively.
This patch also removes some input checking in the Smack callback as it
is no longer needed.
Fixes: 5f8d28f6d7 ("lsm: infrastructure management of the key security blob")
Reported-by: syzbot+044fdf24e96093584232@syzkaller.appspotmail.com
Tested-by: syzbot+044fdf24e96093584232@syzkaller.appspotmail.com
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but
does provide ACS-like features (Subramanian Ananthanarayanan)
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
* pci/quirks:
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
PCI: Add ACS quirk for Qualcomm SA8775P
- Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to
be lost or delivered as the wrong interrupt (Sean Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding
and xilinx-dma-pl driver (Thippeswamy Havalige)
* pci/controller/xilinx:
PCI: xilinx-xdma: Add Xilinx QDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx QDMA PCIe Root Port Bridge
arm64: zynqmp: Add PCIe phys property for ZCU102
PCI: xilinx-nwl: Add PHY support
dt-bindings: pci: xilinx-nwl: Add phys property
PCI: xilinx-nwl: Clean up clock on probe failure/removal
PCI: xilinx-nwl: Rate-limit misc interrupt messages
PCI: xilinx-nwl: Fix register misspelling
PCI: xilinx-nwl: Fix off-by-one in INTx IRQ handler
