Stop using GT pointers for register access.
v2:
- Don't drop the _Generic wrapper macro for xe_mmio_wait32_not() yet.
Defer that to the final patch of the series instead. (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-66-matthew.d.roper@intel.com
Stop using GT pointers for register access. Since a GT was passed as a
parameter to verify_lmem_ready() solely as a way to do MMIO accesses,
change the parameter to xe_device, which more accurately reflects that
this is a device-wide operation.
v2:
- Expand commit message to explain why verify_lmem_ready()'s parameter
changes. (Rodrigo)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-62-matthew.d.roper@intel.com
Matthieu Baerts says:
====================
selftests: mptcp: misc. small fixes
Here are some various fixes for the MPTCP selftests.
Patch 1 fixes a recently modified test to continue to work as expected
on older kernels. This is a fix for a recent fix that can be backported
up to v5.15.
Patch 2 and 3 include dependences when exporting or installing the
tests. Two fixes for v6.11-rc1.
====================
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-0-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to the previous commit, the net_helper.sh file from the parent
directory is used by the MPTCP selftests and it needs to be present when
running the tests.
This file then needs to be listed in the Makefile to be included when
exporting or installing the tests, e.g. with:
make -C tools/testing/selftests \
TARGETS=net/mptcp \
install INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c net/mptcp
Fixes: 1af3bc912e ("selftests: mptcp: lib: use wait_local_port_listen helper")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-3-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The lib.sh file from the parent directory is used by the MPTCP selftests
and it needs to be present when running the tests.
This file then needs to be listed in the Makefile to be included when
exporting or installing the tests, e.g. with:
make -C tools/testing/selftests \
TARGETS=net/mptcp \
install INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c net/mptcp
Fixes: f265d3119a ("selftests: mptcp: lib: use setup/cleanup_ns helpers")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-2-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A new endpoint using the IP of the initial subflow has been recently
added to increase the code coverage. But it breaks the test when using
old kernels not having commit 86e39e0448 ("mptcp: keep track of local
endpoint still available for each msk"), e.g. on v5.15.
Similar to commit d4c81bbb86 ("selftests: mptcp: join: support local
endpoint being tracked or not"), it is possible to add the new endpoint
conditionally, by checking if "mptcp_pm_subflow_check_next" is present
in kallsyms: this is not directly linked to the commit introducing this
symbol but for the parent one which is linked anyway. So we can know in
advance what will be the expected behaviour, and add the new endpoint
only when it makes sense to do so.
Fixes: 4878f9f842 ("selftests: mptcp: join: validate fullmesh endp on 1st sf")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-1-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stop using GT pointers for register access. Note that MIRROR_FUSE3 is a
GT register and is accessed via gt->mmio, whereas GSMBASE is an sgunit
register so it is accessed via tile->mmio.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-58-matthew.d.roper@intel.com
Stop using GT pointers for register access. Although some of the pcode
mailboxes are related to GTs, pcode itself (and the register interface
to access it) are outside the GT and should be accessed through the
tile's MMIO.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-56-matthew.d.roper@intel.com
Stop using GT pointers for register access. This misusage has been
especially confusing in interrupt code because even though some of the
interrupts are related to GTs (or engines within GTs), the interrupt
registers themselves live outside the GT, in the sgunit.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-55-matthew.d.roper@intel.com
Since much of the MMIO register access done by the driver is to non-GT
registers, use of 'xe_gt' in these interfaces has been a long-standing
design flaw that's been hard to disentangle.
To avoid a flag day across the whole driver, munge the function names
and add temporary compatibility macros with the original function names
that can accept either the new xe_mmio or the old xe_gt structure as a
parameter. This will allow us to slowly convert parts of the driver
over to the new interface independently.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-54-matthew.d.roper@intel.com
Although we want to break the GT-centric nature of the MMIO code in the
general driver, the SRIOV handling still relies on data in a VF
substructure of the GT. So add a GT backpointer, but name it
sriov_vf_gt to make it clear that it's only for this one specific
special case and will not be set or usable for anything else.
v2:
- Store backpointer to the GT itself rather than the SRIOV-specific
substructure. (Michal)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> # v1
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-53-matthew.d.roper@intel.com
Once MMIO operations stop being (incorrectly) tied to a GT, we'll still
need a backpointer for feature checks, message logging, and tracepoints.
Use a tile backpointer since that may allow the most useful debugging
output, while also providing access to the xe_device.
v2:
- Make backpointer an xe_tile instead of xe_device. (Michal)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> # v1
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-52-matthew.d.roper@intel.com
By moving the GSI adjustment fields into 'struct xe_mmio' we can replace
the GT's MMIO substructure with another instance of xe_mmio. At the
moment this means MMIO operations wind up pulling information from two
different places (the tile's xe_mmio for the iomap and the GT's xe_mmio
for the adjustment), but we'll address that in future patches.
The type headers change a bit with this change, meaning that various
files should be including xe_device_types.h instead of (or in addition
to) xe_gt_types.h.
v2:
- Fix pre-existing kerneldoc typo while moving the fields (Lucas)
v3:
- Add missing '@' in kerneldoc. (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-49-matthew.d.roper@intel.com
xe_mmio currently has a size parameter that is assigned but never used
anywhere. The current values assigned appear to be the size of the BAR
region assigned for the tile (both for registers and other purposes such
as the GGTT). Since the current field isn't being used for anything,
change the assignments to 4MB (the size of the register region on all
current platform) and rename the field to 'regs_size' to more clearly
describe what it represents. We can use this value in later patches to
help ensure no register accesses accidentally go past the end of the
desired register space (which might not be caught easily if they still
fall within the iomap).
v2:
- s/regs_length/regs_size/ (Lucas)
- Clarify kerneldoc description (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-48-matthew.d.roper@intel.com
Pull the 'mmio' substructure from xe_tile out into a dedicated type.
Future patches will expand this structure and then eventually move MMIO
read/write operations over to using this type.
v2:
- Fix kerneldoc of 'size' field. The rename/refocusing of this field
got moved to the next patch of the series. (Lucas)
- Correct commit message; it's the tile, not the device, mmio that's
been pulled out to a separate type. (Michal)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-47-matthew.d.roper@intel.com
Forcewake is a general GT power management concept that isn't specific
to MMIO register access. Move the forcewake information for a GT out of
the 'mmio' substruct and into a 'pm' substruct. Also use the gt_to_fw()
helper in a few more places where it was being open-coded.
v2:
- Kerneldoc tweaks. (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-46-matthew.d.roper@intel.com
When running in container environmment, /sys/fs/cgroup/ might not be
the real root node of the sk-attached cgroup.
Example:
In container:
% stat /sys//fs/cgroup/
Device: 0,21 Inode: 2214 ..
% stat /sys/fs/cgroup/foo
Device: 0,21 Inode: 2264 ..
The expectation would be for:
nft add rule .. socket cgroupv2 level 1 "foo" counter
to match traffic from a process that got added to "foo" via
"echo $pid > /sys/fs/cgroup/foo/cgroup.procs".
However, 'level 3' is needed to make this work.
Seen from initial namespace, the complete hierarchy is:
% stat /sys/fs/cgroup/system.slice/docker-.../foo
Device: 0,21 Inode: 2264 ..
i.e. hierarchy is
0 1 2 3
/ -> system.slice -> docker-1... -> foo
... but the container doesn't know that its "/" is the "docker-1.."
cgroup. Current code will retrieve the 'system.slice' cgroup node
and store its kn->id in the destination register, so compare with
2264 ("foo" cgroup id) will not match.
Fetch "/" cgroup from ->init() and add its level to the level we try to
extract. cgroup root-level is 0 for the init-namespace or the level
of the ancestor that is exposed as the cgroup root inside the container.
In the above case, cgrp->level of "/" resolved in the container is 2
(docker-1...scope/) and request for 'level 1' will get adjusted
to fetch the actual level (3).
v2: use CONFIG_SOCK_CGROUP_DATA, eval function depends on it.
(kernel test robot)
Cc: cgroups@vger.kernel.org
Fixes: e0bb96db96 ("netfilter: nft_socket: add support for cgroupsv2")
Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We must put 'sk' reference before returning.
Fixes: 039b1f4f24 ("netfilter: nft_socket: fix erroneous socket assignment")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There's no need to list "s35390a" in the DT match table. The I2C core
will strip any vendor prefix and match against the i2c_device_id table
which has an "s35390a" entry.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240826191321.1410668-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Convert the Spreadtrum SC2731 RTC bindings to DT schema.
Rename file to match compatible.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/ZolsyEC8eeJWNIb6@standask-GA-A55M-S2HP
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In accordance with the existing comment and code analysis
it is quite likely that there is a missed 'else' when adapter
times out. Add it.
Fixes: 5bc1200852 ("i2c: Add Intel SCH SMBus support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <stable@vger.kernel.org> # v2.6.27+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Change the memcpy length to fix the out-of-bounds issue when writing the
data that is not 4 byte aligned to TX FIFO.
To reproduce the issue, write 3 bytes data to NOR chip.
dd if=3b of=/dev/mtd0
[ 36.926103] ==================================================================
[ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838
[ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455
[ 36.946721]
[ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070
[ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT)
[ 36.961260] Call trace:
[ 36.963723] dump_backtrace+0x90/0xe8
[ 36.967414] show_stack+0x18/0x24
[ 36.970749] dump_stack_lvl+0x78/0x90
[ 36.974451] print_report+0x114/0x5cc
[ 36.978151] kasan_report+0xa4/0xf0
[ 36.981670] __asan_report_load_n_noabort+0x1c/0x28
[ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838
[ 36.990800] spi_mem_exec_op+0x8ec/0xd30
[ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0
[ 36.999323] spi_mem_dirmap_write+0x238/0x32c
[ 37.003710] spi_nor_write_data+0x220/0x374
[ 37.007932] spi_nor_write+0x110/0x2e8
[ 37.011711] mtd_write_oob_std+0x154/0x1f0
[ 37.015838] mtd_write_oob+0x104/0x1d0
[ 37.019617] mtd_write+0xb8/0x12c
[ 37.022953] mtdchar_write+0x224/0x47c
[ 37.026732] vfs_write+0x1e4/0x8c8
[ 37.030163] ksys_write+0xec/0x1d0
[ 37.033586] __arm64_sys_write+0x6c/0x9c
[ 37.037539] invoke_syscall+0x6c/0x258
[ 37.041327] el0_svc_common.constprop.0+0x160/0x22c
[ 37.046244] do_el0_svc+0x44/0x5c
[ 37.049589] el0_svc+0x38/0x78
[ 37.052681] el0t_64_sync_handler+0x13c/0x158
[ 37.057077] el0t_64_sync+0x190/0x194
[ 37.060775]
[ 37.062274] Allocated by task 455:
[ 37.065701] kasan_save_stack+0x2c/0x54
[ 37.069570] kasan_save_track+0x20/0x3c
[ 37.073438] kasan_save_alloc_info+0x40/0x54
[ 37.077736] __kasan_kmalloc+0xa0/0xb8
[ 37.081515] __kmalloc_noprof+0x158/0x2f8
[ 37.085563] mtd_kmalloc_up_to+0x120/0x154
[ 37.089690] mtdchar_write+0x130/0x47c
[ 37.093469] vfs_write+0x1e4/0x8c8
[ 37.096901] ksys_write+0xec/0x1d0
[ 37.100332] __arm64_sys_write+0x6c/0x9c
[ 37.104287] invoke_syscall+0x6c/0x258
[ 37.108064] el0_svc_common.constprop.0+0x160/0x22c
[ 37.112972] do_el0_svc+0x44/0x5c
[ 37.116319] el0_svc+0x38/0x78
[ 37.119401] el0t_64_sync_handler+0x13c/0x158
[ 37.123788] el0t_64_sync+0x190/0x194
[ 37.127474]
[ 37.128977] The buggy address belongs to the object at ffff00081037c2a0
[ 37.128977] which belongs to the cache kmalloc-8 of size 8
[ 37.141177] The buggy address is located 0 bytes inside of
[ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3)
[ 37.153465]
[ 37.154971] The buggy address belongs to the physical page:
[ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c
[ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff)
[ 37.175149] page_type: 0xfdffffff(slab)
[ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000
[ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000
[ 37.194553] page dumped because: kasan: bad access detected
[ 37.200144]
[ 37.201647] Memory state around the buggy address:
[ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
[ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc
[ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc
[ 37.228186] ^
[ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.246962] ==================================================================
[ 37.254394] Disabling lock debugging due to kernel taint
0+1 records in
0+1 records out
3 bytes copied, 0.335911 s, 0.0 kB/s
Fixes: a5356aef6a ("spi: spi-mem: Add driver for NXP FlexSPI controller")
Cc: stable@kernel.org
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://patch.msgid.link/20240911211146.3337068-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make the values of the symbolic constants that define the valid linkages
for functions and variables explicit.
Signed-off-by: Will Hawkins <hawkinsw@obs.cr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240911055033.2084881-1-hawkinsw@obs.cr
The last -next "new features" pull request for v6.12. The stack now
supports DFS on MLO but otherwise nothing really standing out.
Major changes:
cfg80211/mac80211
* EHT rate support in AQL airtime
* DFS support for MLO
rtw89
* complete BT-coexistence code for RTL8852BT
* RTL8922A WoWLAN net-detect support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmbhVykRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtxgAf+J9om4LIpVd6hNT/hlkLf0jOlIkoOmbYT
16+g/dYRher0HJUMO/gcmubBO8dPmxopQEkR7XvkEqV72EAYcaDcios94cj0Uv1F
GbnixnO3VvCOE86PoOruM+WHT6ct9+ECWB6yODnF7Pps+WNrzhVTfmXm4j8vWnFH
KyHD/Hy4VsPDzj0EmzAC4ppkLMWfWypDbP4PBIOq9s+Oj6gJ671amWjmgFou+o9K
yOtNTBiBaVuBrkv5sJTbQIDkAvK2V9im2VTjrZej2a/3wm6+z3XM28tWbcsYJEyS
U2ZpHkS6QXlNaL4B8lDc6OP/c/xwM1CkzZsKe9p3T6iRemA0WLWaSg==
=gaJv
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.12
The last -next "new features" pull request for v6.12. The stack now
supports DFS on MLO but otherwise nothing really standing out.
Major changes:
cfg80211/mac80211
* EHT rate support in AQL airtime
* DFS support for MLO
rtw89
* complete BT-coexistence code for RTL8852BT
* RTL8922A WoWLAN net-detect support
* tag 'wireless-next-2024-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (105 commits)
wifi: brcmfmac: cfg80211: Convert comma to semicolon
wifi: rsi: Remove an unused field in struct rsi_debugfs
wifi: libertas: Cleanup unused declarations
wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_bus_probe()
wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_sdio_probe()
wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext()
wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop()
wifi: cfg80211: fix two more possible UBSAN-detected off-by-one errors
wifi: cfg80211: fix kernel-doc for per-link data
wifi: mt76: mt7925: replace chan config with extend txpower config for clc
wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clc
wifi: mt76: mt7615: check devm_kasprintf() returned value
wifi: mt76: mt7925: convert comma to semicolon
wifi: mt76: mt7925: fix a potential association failure upon resuming
wifi: mt76: Avoid multiple -Wflex-array-member-not-at-end warnings
wifi: mt76: mt7921: Check devm_kasprintf() returned value
wifi: mt76: mt7915: check devm_kasprintf() returned value
wifi: mt76: mt7915: avoid long MCU command timeouts during SER
wifi: mt76: mt7996: fix uninitialized TLV data
...
====================
Link: https://patch.msgid.link/20240911084147.A205DC4AF0F@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Salvatore Benedetto reported an issue that when doing syscall tracepoint
tracing the kernel stack is empty. For example, using the following
command line
bpftrace -e 'tracepoint:syscalls:sys_enter_read { print("Kernel Stack\n"); print(kstack()); }'
bpftrace -e 'tracepoint:syscalls:sys_exit_read { print("Kernel Stack\n"); print(kstack()); }'
the output for both commands is
===
Kernel Stack
===
Further analysis shows that pt_regs used for bpf syscall tracepoint
tracing is from the one constructed during user->kernel transition.
The call stack looks like
perf_syscall_enter+0x88/0x7c0
trace_sys_enter+0x41/0x80
syscall_trace_enter+0x100/0x160
do_syscall_64+0x38/0xf0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The ip address stored in pt_regs is from user space hence no kernel
stack is printed.
To fix the issue, kernel address from pt_regs is required.
In kernel repo, there are already a few cases like this. For example,
in kernel/trace/bpf_trace.c, several perf_fetch_caller_regs(fake_regs_ptr)
instances are used to supply ip address or use ip address to construct
call stack.
Instead of allocate fake_regs in the stack which may consume
a lot of bytes, the function perf_trace_buf_alloc() in
perf_syscall_{enter, exit}() is leveraged to create fake_regs,
which will be passed to perf_call_bpf_{enter,exit}().
For the above bpftrace script, I got the following output with this patch:
for tracepoint:syscalls:sys_enter_read
===
Kernel Stack
syscall_trace_enter+407
syscall_trace_enter+407
do_syscall_64+74
entry_SYSCALL_64_after_hwframe+75
===
and for tracepoint:syscalls:sys_exit_read
===
Kernel Stack
syscall_exit_work+185
syscall_exit_work+185
syscall_exit_to_user_mode+305
do_syscall_64+118
entry_SYSCALL_64_after_hwframe+75
===
Reported-by: Salvatore Benedetto <salvabenedetto@meta.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240910214037.3663272-1-yonghong.song@linux.dev
With that it uses the generic BTF based pretty printer:
This one we need to think about, not being acquainted with this syscall,
should we _traverse_ that list somehow? Would that be useful?
root@number:~# perf trace -e set_robust_list sleep 1
0.000 ( 0.004 ms): sleep/1206493 set_robust_list(head: (struct robust_list_head){.list = (struct robust_list){.next = (struct robust_list *)0x7f48a9a02a20,},.futex_offset = (long int)-32,}, len: 24) =
root@number:~#
strace prints the default integer args:
root@number:~# strace -e set_robust_list sleep 1
set_robust_list(0x7efd99559a20, 24) = 0
+++ exited with 0 +++
root@number:~#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org
Link: https://lore.kernel.org/lkml/ZuH6MquMraBvODRp@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tao Chen says:
====================
bpf: Add percpu map value size check
Check percpu map value size first and add the test case in selftest.
Change list:
- v2 -> v3:
- use bpf_map_create API and mv test case in map_percpu_stats.c
- v1 -> v2:
- round up map value size with 8 bytes in patch 1
- add selftest case in patch 2
====================
Link: https://lore.kernel.org/r/20240910144111.1464912-1-chen.dylane@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This test case checks the errno message when percpu map value size
exceeds PCPU_MIN_UNIT_SIZE.
root@debian:~# ./test_maps
...
test_map_percpu_stats_hash_of_maps:PASS
test_map_percpu_stats_map_value_size:PASS
test_sk_storage_map:PASS
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240910144111.1464912-3-chen.dylane@gmail.com
Percpu map is often used, but the map value size limit often ignored,
like issue: https://github.com/iovisor/bcc/issues/2519. Actually,
percpu map value size is bound by PCPU_MIN_UNIT_SIZE, so we
can check the value size whether it exceeds PCPU_MIN_UNIT_SIZE first,
like percpu map of local_storage. Maybe the error message seems clearer
compared with "cannot allocate memory".
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240910144111.1464912-2-chen.dylane@gmail.com
In the event that the I2C bus was powered down when the I2C controller
driver loads, or some spurious pulses occur on the I2C bus, it's
possible that the controller detects a spurious I2C "start" condition.
In this situation it may continue to report the bus is busy indefinitely
and block the controller from working.
The "single-master" DT flag can be specified to disable bus busy checks
entirely, but this may not be safe to use in situations where other I2C
masters may potentially exist.
In the event that the controller reports "bus busy" for too long when
starting a transaction, we can try reinitializing the controller to see
if the busy condition clears. This allows recovering from this scenario.
Fixes: e1d5b6598c ("i2c: Add support for Xilinx XPS IIC Bus Interface")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Cc: <stable@vger.kernel.org> # v2.6.34+
Reviewed-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Frequently an I2C write will be followed by a read, such as a register
address write followed by a read of the register value. In this driver,
when the TX FIFO half empty interrupt was raised and it was determined
that there was enough space in the TX FIFO to send the following read
command, it would do so without waiting for the TX FIFO to actually
empty.
Unfortunately it appears that in some cases this can result in a NAK
that was raised by the target device on the write, such as due to an
unsupported register address, being ignored and the subsequent read
being done anyway. This can potentially put the I2C bus into an
invalid state and/or result in invalid read data being processed.
To avoid this, once a message has been fully written to the TX FIFO,
wait for the TX FIFO empty interrupt before moving on to the next
message, to ensure NAKs are handled properly.
Fixes: e1d5b6598c ("i2c: Add support for Xilinx XPS IIC Bus Interface")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Cc: <stable@vger.kernel.org> # v2.6.34+
Reviewed-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Several syzbot soft lockup reports all have in common sock_hash_free()
If a map with a large number of buckets is destroyed, we need to yield
the cpu when needed.
Fixes: 75e68e5bf2 ("bpf, sockhash: Synchronize delete from bucket list on map free")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240906154449.3742932-1-edumazet@google.com
Merge ACPI backlight (video) driver update, ACPI resource management
updates, an ACPI processor aggregator device (PAD) driver fix, and
miscellaneous ACPI updates for 6.12-rc1:
- Add force_vendor quirk for Panasonic Toughbook CF-18 in the ACPI
backlight driver (Hans de Goede).
- Make the DMI checks related to backlight handling on Lenovo Yoga
Tab 3 X90F less strict (Hans de Goede).
- Enforce native backlight handling on Apple MacbookPro9,2 (Esther
Shimanovich).
- Add IRQ override quirks for Asus Vivobook Go E1404GAB and MECHREV
GM7XG0M, and refine the TongFang GMxXGxx quirk (Li Chen, Tamim Khan,
Werner Sembach).
- Fix crash in exit_round_robin() in the ACPI processor aggregator
device (PAD) driver (Seiji Nishikawa).
- Define and use symbols for device and class name lengths in the ACPI
bus type code and make the code use strscpy() instead of strcpy() in
several places (Muhammad Qasim Abdul Majeed).
* acpi-video:
ACPI: video: Add force_vendor quirk for Panasonic Toughbook CF-18
ACPI: x86: Make Lenovo Yoga Tab 3 X90F DMI match less strict
ACPI: video: Make Lenovo Yoga Tab 3 X90F DMI match less strict
ACPI: video: force native for Apple MacbookPro9,2
* acpi-resource:
ACPI: resource: Add another DMI match for the TongFang GMxXGxx
ACPI: resource: Skip IRQ override on Asus Vivobook Go E1404GAB
ACPI: resource: Do IRQ override on MECHREV GM7XG0M
* acpi-pad:
ACPI: PAD: fix crash in exit_round_robin()
* acpi-misc:
ACPI: button: Use strscpy() instead of strcpy()
ACPI: bus: Define and use symbols for device and class name lengths
ACPI: battery : Use strscpy() instead of strcpy()
ACPI: acpi_processor: Use strscpy instead() of strcpy()
ACPI: PAD: Use strscpy() instead of strcpy()
ACPI: AC: Use strscpy() instead of strcpy()
Building with clang, W=1, CONFIG_PM=n and CONFIG_OF_GPIO=n leads to
warning about unused ti_sn_pwm_pin_request() and
ti_sn_pwm_pin_release(). Fix by annotating them with __maybe_unused.
See also commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/136ecd978aedd7df39d1b1c37b70596027ff0a3e.1725962479.git.jani.nikula@intel.com
Changes the himax-hx83112a panel to use multi style functions for
improved error handling.
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904141521.554451-1-tejasvipin76@gmail.com
Currently there's a single ring owner of a mapped buffer, and hence the
reference count will always be 1 when it's torn down and freed. However,
in preparation for being able to link io_mapped_ubuf to different spots,
add a reference count to manage the lifetime of it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
