Factor out bulk transfer for VCHIQ_BULK_MODE_NOCALLBACK and
VCHIQ_BULK_MODE_CALLBACK mode into a separate dedicated function
bulk_xfer_callback_interruptible(). It is suffixed by "_interruptible"
to denote that it can be interrupted and -EAGAIN can be returned. It
would be up to the users of the function to retry the call in those cases.
bulk_xfer_callback_interruptible() also takes in 'mode' parameter to
differentiate between VCHIQ_BULK_MODE_NOCALLBACK and
VCHIQ_BULK_MODE_CALLBACK, which then is directly passed to
vchiq_bulk_xfer_queue_msg_interruptible() inside the function.
Adjust the calls to vchiq-dev.c ioctl interface and vchiq_arm.c
for the respective bulk transfers.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240910051007.297227-5-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor out bulk transfer for blocking mode into a separate dedicated
function bulk_xfer_blocking_interruptible(). It is suffixed by
"_interruptible" to denote that it can be interrupted and -EAGAIN
can be returned. It would be up to the users of the function to retry
the call in those cases.
Adjust the calls to vchiq-dev.c ioctl interface and vchiq_arm.c
for blocking bulk transfers.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240910051007.297227-4-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Factor out core logic for preparing bulk data transfer(mutex locking,
waits on vchiq_bulk_queue wait-queue, initialising the bulk transfer)
out of the vchiq_bulk_transfer(). This simplifies the existing
vchiq_bulk_transfer() and makes it more readable since all the core
logic is handled in vchiq_bulk_xfer_queue_msg_interruptible(). It
will also help us to refactor vchiq_bulk_transfer() easily for different
vchiq bulk transfer modes.
No functional changes intended in this patch.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240910051007.297227-3-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bulk transfer is VCHIQ_BULK_MODE_WAITING is used by VCHIQ ioctl
interface. It is factored out to a separate function from
vchiq_bulk_transfer() to bulk_xfer_waiting_interruptible().
This is a part of vchiq_bulk_transfer refactoring. Each bulk mode
will have their dedicated functions to execute bulk transfers.
Each mode will be handled separately in subsequent patches.
bulk_xfer_waiting_interruptible() is suffixed with "_interruptible"
to denote that it can be interrupted when a signal is received.
-EAGAIN maybe returned in those cases, similar to what
vchiq_bulk_transfer() does.
Adjust the vchiq_irq_queue_bulk_tx_rx() in the vchiq-dev.c to call
bulk_xfer_waiting_interruptible() for waiting mode. A temporary
goto label has been introduced to jump the call execution over
vchiq_bulk_transfer() for waiting mode only. When all dedicated bulk
transfer calls are introduced, this label shall be dropped.
No function changes intended in this patch.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240910051007.297227-2-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, xskxceiver assumes that MAX_SKB_FRAGS value is always 17
which is not true - since the introduction of BIG TCP this can now take
any value between 17 to 45 via CONFIG_MAX_SKB_FRAGS.
Adjust the TOO_MANY_FRAGS test case to read the currently configured
MAX_SKB_FRAGS value by reading it from /proc/sys/net/core/max_skb_frags.
If running system does not provide that sysctl file then let us try
running the test with a default value.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240910124129.289874-1-maciej.fijalkowski@intel.com
Apple's older A7-A9 SoCs seems to use bit 3 in UTRSTAT as RXTO, which is
enabled by bit 11 in UCON.
Access these bits in addition to the original RXTO and RXTO enable bits,
to allow serial rx to function on A7-A9 SoCs. This change does not
appear to affect the A10 SoC and up.
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20240911050741.14477-4-towinchenmi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Apple's earlier SoCs, like A7-A11, requires 32-bit writes for the serial
port. Otherwise, a SError happens when writing to UTXH (+0x20). This only
manifested in earlycon as reg-io-width in the device tree is consulted
for normal serial writes.
Change the iotype of the port to UPIO_MEM32, to allow the serial port to
function on A7-A11 SoCs. This change does not appear to affect Apple M1 and
above.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Tested-by: Janne Grunau <j@jannau.net>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20240911050741.14477-3-towinchenmi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New entries using BIT() will be added soon, so change the existing ones to
use bit manipulation macros including BIT() and GENMASK() for
consistency.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20240911050741.14477-2-towinchenmi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The write to RP2_GLOBAL_CMD followed by an immediate read of
RP2_GLOBAL_CMD in rp2_reset_asic() is intented to flush out the write,
however by then the device is already in reset and cannot respond to a
memory cycle access.
On platforms such as the Raspberry Pi 4 and others using the
pcie-brcmstb.c driver, any memory access to a device that cannot respond
is met with a fatal system error, rather than being substituted with all
1s as is usually the case on PC platforms.
Swapping the delay and the read ensures that the device has finished
resetting before we attempt to read from it.
Fixes: 7d9f49afa4 ("serial: rp2: New driver for Comtrol RocketPort 2 cards")
Cc: stable <stable@kernel.org>
Suggested-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240906225435.707837-1-florian.fainelli@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240903131503.961178-1-liaochen4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The polled UART operations are used by the kernel debugger (KDB, KGDB),
which can interrupt the kernel at any point in time. The current
Qualcomm GENI implementation does not really work when there is on-going
serial output as it inadvertently "hijacks" the current tx command,
which can result in both the initial debugger output being corrupted as
well as the corruption of any on-going serial output (up to 4k
characters) when execution resumes:
0190: abcdefghijklmnopqrstuvwxyz0123456789 0190: abcdefghijklmnopqrstuvwxyz0123456789
0191: abcdefghijklmnop[ 50.825552] sysrq: DEBUG
qrstuvwxyz0123456789 0191: abcdefghijklmnopqrstuvwxyz0123456789
Entering kdb (current=0xffff53510b4cd280, pid 640) on processor 2 due to Keyboard Entry
[2]kdb> go
omlji3h3h2g2g1f1f0e0ezdzdycycxbxbwawav :t72r2rp
o9n976k5j5j4i4i3h3h2g2g1f1f0e0ezdzdycycxbxbwawavu:t7t8s8s8r2r2q0q0p
o9n9n8ml6k6k5j5j4i4i3h3h2g2g1f1f0e0ezdzdycycxbxbwawav v u:u:t9t0s4s4rq0p
o9n9n8m8m7l7l6k6k5j5j40q0p p o
o9n9n8m8m7l7l6k6k5j5j4i4i3h3h2g2g1f1f0e0ezdzdycycxbxbwawav :t8t9s4s4r4r4q0q0p
Fix this by making sure that the polled output implementation waits for
the tx fifo to drain before cancelling any on-going longer transfers. As
the polled code cannot take any locks, leave the state variables as they
are and instead make sure that the interrupt handler always starts a new
tx command when there is data in the write buffer.
Since the debugger can interrupt the interrupt handler when it is
writing data to the tx fifo, it is currently not possible to fully
prevent losing up to 64 bytes of tty output on resume.
Fixes: c4f528795d ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Cc: stable@vger.kernel.org # 4.17
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-9-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Disable the GENI interrupts during console writes to reduce the risk of
having interrupt handlers spinning on the port lock on other cores for
extended periods of time.
This can, for example, reduce the total amount of time spent in the
interrupt handler during boot of the x1e80100 CRD by up to a factor nine
(e.g. from 274 ms to 30 ms) while the worst case processing time drops
from 19 ms to 8 ms.
Fixes: c4f528795d ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-8-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Qualcomm serial console implementation is broken and can lose
characters when the serial port is also used for tty output.
Specifically, the console code only waits for the current tx command to
complete when all data has already been written to the fifo. When there
are on-going longer transfers this often means that console output is
lost when the console code inadvertently "hijacks" the current tx
command instead of starting a new one.
This can, for example, be observed during boot when console output that
should have been interspersed with init output is truncated:
[ 9.462317] qcom-snps-eusb2-hsphy fde000.phy: Registered Qcom-eUSB2 phy
[ OK ] Found device KBG50ZNS256G KIOXIA Wi[ 9.471743ndows.
[ 9.539915] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Add a new state variable to track how much data has been written to the
fifo and use it to determine when the fifo and shift register are both
empty. This is needed since there is currently no other known way to
determine when the shift register is empty.
This in turn allows the console code to interrupt long transfers without
losing data.
Note that the oops-in-progress case is similarly broken as it does not
cancel any active command and also waits for the wrong status flag when
attempting to drain the fifo (TX_FIFO_NOT_EMPTY_EN is only set when
cancelling a command leaves data in the fifo).
Fixes: c4f528795d ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Fixes: a1fee899e5 ("tty: serial: qcom_geni_serial: Fix softlock")
Fixes: 9e957a1550 ("serial: qcom-geni: Don't cancel/abort if we can't get the port lock")
Cc: stable@vger.kernel.org # 4.17
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-7-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With a small modification the qcom_geni_serial_poll_bit() function
could be used to poll more than just a single bit. Let's generalize
it. We'll make the qcom_geni_serial_poll_bit() into just a wrapper of
the general function.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240610152420.v4.5.Ic6411eab8d9d37acc451705f583fb535cd6dadb2@changeid
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-6-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "offset" passed in should be unsigned since it's always a positive
offset from our memory mapped IO.
The "field" should be u32 since we're anding it with a 32-bit value
read from the device.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240610152420.v4.4.I24a0de52dd7336908df180fa6b698e001f3aff82@changeid
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-5-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For UART devices the M_GP_LENGTH is the TX word count. For other
devices this is the transaction word count.
For UART devices the S_GP_LENGTH is the RX word count.
The IRQ_EN set/clear registers allow you to set or clear bits in the
IRQ_EN register without needing a read-modify-write.
Acked-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240610152420.v4.1.Ife7ced506aef1be3158712aa3ff34a006b973559@changeid
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 663abb1a7a ("tty: serial: qcom_geni_serial: Fix UART hang")
addressed an issue with stalled tx after the console code interrupted
the last bytes of a tx command by reenabling the watermark interrupt if
there is data in write buffer. This can however break software flow
control by re-enabling tx after the user has stopped it.
Address the original issue by not clearing the CMD_DONE flag after
polling for command completion. This allows the interrupt handler to
start another transfer when the CMD_DONE interrupt has not been disabled
due to flow control.
Fixes: c4f528795d ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Fixes: 663abb1a7a ("tty: serial: qcom_geni_serial: Fix UART hang")
Cc: stable@vger.kernel.org # 4.17
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The qcom_geni_serial_poll_bit() can be used to wait for events like
command completion and is supposed to wait for the time it takes to
clear a full fifo before timing out.
As noted by Doug, the current implementation does not account for start,
stop and parity bits when determining the timeout. The helper also does
not currently account for the shift register and the two-word
intermediate transfer register.
A too short timeout can specifically lead to lost characters when
waiting for a transfer to complete as the transfer is cancelled on
timeout.
Instead of determining the poll timeout on every call, store the fifo
timeout when updating it in set_termios() and make sure to take the
shift and intermediate registers into account. Note that serial core has
already added a 20 ms margin to the fifo timeout.
Also note that the current uart_fifo_timeout() interface does
unnecessary calculations on every call and did not exist in earlier
kernels so only store its result once. This facilitates backports too as
earlier kernels can derive the timeout from uport->timeout, which has
since been removed.
Fixes: c4f528795d ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Cc: stable@vger.kernel.org # 4.17
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Streams should flush their TRB cache, re-read TRBs, and start executing
TRBs from the beginning of the new dequeue pointer after a 'Set TR Dequeue
Pointer' command.
Cadence controllers may fail to start from the beginning of the dequeue
TRB as it doesn't clear the Opaque 'RsvdO' field of the stream context
during 'Set TR Dequeue' command. This stream context area is where xHC
stores information about the last partially executed TD when a stream
is stopped. xHC uses this information to resume the transfer where it left
mid TD, when the stream is restarted.
Patch fixes this by clearing out all RsvdO fields before initializing new
Stream transfer using a 'Set TR Dequeue Pointer' command.
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: stable@vger.kernel.org
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB95386A40146E3EC64086F409DD9D2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SS_CON and U3 wakeup need 'ref_clk' on. iMX8MP turn off it while system
sleep, So disable these wakeup source and only enable DP/DM wakeup source
for host mode.
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240906-dwc-mp-v5-3-ea8ec6774e7b@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add 2 software manage quirk properties (xhci-missing-cas-quirk and
xhci-skip-phy-init-quirk) for xhci host.
dwc3 driver have PHY management to cover both device and host mode, so add
xhci-skip-phy-init-quirk to skip PHY management from HCD core.
Cold Attach Status (CAS) bit can't be set at i.MX8MP after resume from
suspend state. So set xhci-missing-cas-quirk.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240906-dwc-mp-v5-2-ea8ec6774e7b@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parse software managed property 'xhci-skip-phy-init-quirk' and
'xhci-skip-phy-init-quirk' to apply related quirk. It allows usb glue layer
driver apply these quirk.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240906-dwc-mp-v5-1-ea8ec6774e7b@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb5744 supports SMBus Configuration and it may be configured via the
SMBus slave interface during the hub start-up configuration stage.
To program it driver uses i2c-bus phandle (added in commit '02be19e914
dt-bindings: usb: Add support for Microchip usb5744 hub controller') to
get i2c client device and then based on usb5744 compatible check calls
usb5744 i2c default initialization sequence.
Apart from the USB command attach, prevent the hub from suspend.
when the USB Attach with SMBus (0xAA56) command is issued to the hub,
the hub is getting enumerated and then it puts in a suspend mode.
This causes the hub to NAK any SMBus access made by the SMBus Master
during this period and not able to see the hub's slave address while
running the "i2c probe" command.
Prevent the MCU from putting the HUB in suspend mode through register
write. The BYPASS_UDC_SUSPEND bit (Bit 3) of the RuntimeFlags2
register at address 0x411D controls this aspect of the hub. The
BYPASS_UDC_SUSPEND bit in register 0x411Dh must be set to ensure that the
MCU is always enabled and ready to respond to SMBus runtime commands.
This register needs to be written before the USB attach command is issued.
The byte sequence is as follows:
Slave addr: 0x2d 00 00 05 00 01 41 1D 08
Slave addr: 0x2d 99 37 00
Slave addr: 0x2d AA 56 00
Also since usb5744 i2c initialization routine uses i2c SMBus APIs invoke
these APIs only when i2c driver is enabled in the kernel configuration.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1725732196-70975-3-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce dedicated field 'power_on_delay_us' in onboard platform data
and update its delay for USB5744 configuration. Hub itself requires some
delay after reset to get to state where configuration data is going to
be accepted. Without delay upcoming support for configuration via SMBUS
is reporting a failure on the first SMBus write.
i2c 2-002d: error -ENXIO: BYPASS_UDC_SUSPEND bit configuration failed
Similar delay is likely also required for default configuration but
because there is enough time (code execution) between reset and usage
of the hub any issue is not visible but it doesn't mean delay shouldn't
be reflected.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Suggested-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1725732196-70975-2-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dwc2_handle_usb_suspend_intr() function disables gadget clocks in USB
peripheral mode when no other power-down mode is available (introduced by
commit 0112b7ce68 ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.")).
However, the dwc2_drd_role_sw_set() USB role update handler attempts to
read DWC2 registers if the USB role has changed while the USB is in suspend
mode (when the clocks are gated). This causes the system to hang.
Release the gadget clocks before handling the USB role update.
Fixes: 0112b7ce68 ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.")
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Marek <tomas.marek@elrest.cz>
Link: https://lore.kernel.org/r/20240906055025.25057-1-tomas.marek@elrest.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix changes incorrect usb_request->status returned during disabling
endpoints. Before fix the status returned during dequeuing requests
while disabling endpoint was ECONNRESET.
Patch change it to ESHUTDOWN.
Patch fixes issue detected during testing UVC gadget.
During stopping streaming the class starts dequeuing usb requests and
controller driver returns the -ECONNRESET status. After completion
requests the class or application "uvc-gadget" try to queue this
request again. Changing this status to ESHUTDOWN cause that UVC assumes
that endpoint is disabled, or device is disconnected and stops
re-queuing usb requests.
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: stable@vger.kernel.org
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB9538E8CA7A2096AAF6A3718FDD9E2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TCPCI USB PHY - PTN5110 could be used with SOCs that only support
the edge-triggered GPIO interrupts such as TI's K3 device AM69.
Move the interrupt configuration to the firmware which would
allow to accommodate edge triggered interrupts for such SOCs.
In order to support the edge interrupts, register irq line in advance
and keep track of occurrence during port registering.
When the edge interrupts are used, it is observed that some of the
interrupts are missed when tcpci_irq() is serving the current
interrupt. Therefore, check the status register at the end of
tcpci_irq() and re-run the function if the status is not clear
i.e. pending interrupt.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240905065328.7116-1-parth105105@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Rothwell reported htmldocs warning when merging usb tree:
Documentation/filesystems/9p.rst:99: ERROR: Unexpected indentation.
That's because Sphinx tries rendering p9_fwd.py output as a grid table
instead.
Wrap shell commands in "USBG Example" section in literal code blocks
to fix above warning and to be in line with rest of commands in the doc.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20240905184059.0f30ff9a@canb.auug.org.au/
Fixes: 673f0c3ffc ("tools: usb: p9_fwd: add usb gadget packet forwarder script")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240908113423.158352-1-bagasdotme@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The io worker threads are userland threads that just never exit to the
userland. By that, they are also assigned to a cgroup (the group of the
creating task).
When creating a new io worker, this worker should inherit the cpuset
of the cgroup.
Fixes: da64d6db3b ("io_uring: One wqe per wq")
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240910171157.166423-3-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The io worker threads are userland threads that just never exit to the
userland. By that, they are also assigned to a cgroup (the group of the
creating task).
When changing the affinity of the io_wq thread via syscall, we must only
allow cpumasks within the limits defined by the cpuset controller of the
cgroup (if enabled).
Fixes: da64d6db3b ("io_uring: One wqe per wq")
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240910171157.166423-2-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The combination of dev_err() and the returned error code could be
replaced by dev_err_probe() in driver's probe function. Let's,
converting to dev_err_probe() to make code more simple.
Signed-off-by: Lin Ruifeng <linruifeng4@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20240907081351.19879-1-linruifeng4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use newly added mm function unpin_user_folio() to put refs by npages
count.
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240911064935.5630-5-kundan.kumar@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new function unpin_user_folio() to put the refs of a folio by
npages count.
The check for BIO_PAGE_PINNED flag is removed as it is already checked
in bio_release_pages().
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240911064935.5630-4-kundan.kumar@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a bigger size from folio to bio and skip merge processing for pages.
Fetch the offset of page within a folio. Depending on the size of folio
and folio_offset, fetch a larger length. This length may consist of
multiple contiguous pages if folio is multiorder.
Using the length calculate number of pages which will be added to bio and
increment the loop counter to skip those pages.
This technique helps to avoid overhead of merging pages which belong to
same large order folio.
Also folio-ize the functions bio_iov_add_page() and
bio_iov_add_zone_append_page()
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240911064935.5630-3-kundan.kumar@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Added new bio_add_hw_folio() function as a wrapper around
bio_add_hw_page(). This is a prep patch.
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240911064935.5630-2-kundan.kumar@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Here's a new pl2303 device id.
This one has been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCZuEzcQAKCRALxc3C7H1l
CGeZAQDn3AvDVGqJJ4kBZC1ldLo4aOz6z5+njmoL2cZyQ3d5iwD9F0e10fd2FA6a
fxm3gt5cJEtbs+kt8V6LhIXbTqtMJA0=
=CgUW
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.12-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial device id for 6.12-rc1
Here's a new pl2303 device id.
This one has been in linux-next with no reported issues.
* tag 'usb-serial-6.12-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: pl2303: add device id for Macrosilicon MS3020
Here are the USB-serial updates for 6.12-rc1, including:
- fix kobil_sct initial terminal settings
- set driver owner when registering drivers
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCZuEywAAKCRALxc3C7H1l
CFAWAP4muwo7gSV//umprCKbXlFGnsfS7rpDuwusRNTZFjGTPAEAs/n0htTNoFo2
RKKnRcZBk7O6Do6eByIQGuEhCYZjgAw=
=iXi0
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 6.12-rc1
Here are the USB-serial updates for 6.12-rc1, including:
- fix kobil_sct initial terminal settings
- set driver owner when registering drivers
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: kobil_sct: restore initial terminal settings
USB: serial: drop driver owner initialization
USB: serial: set driver owner when registering drivers
This includes following USB4/Thunderbolt changes for the v6.12 merge
window:
- Improvements for software receiver lane margining
- Enable support for optional voltage offset range for receiver lane
margining.
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=bn+4
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.12 merge window
This includes following USB4/Thunderbolt changes for the v6.12 merge
window:
- Improvements for software receiver lane margining
- Enable support for optional voltage offset range for receiver lane
margining.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Improve software receiver lane margining
thunderbolt: Add optional voltage offset range for receiver lane margining
thunderbolt: Consolidate margining parameters into a structure
thunderbolt: Add missing usb4_port_sb_read() to usb4_port_sw_margin()
There may be a case where i2s_data may not get initialized by the for
loop which will cause the kernel crash. Initialize the i2s_data to NULL
and abort execute if it isn't found.
Fixes: 402bbb13a1 ("ASoC: mediatek: mt8365: Add I2S DAI support")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240911111317.4072349-1-usama.anjum@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clang static checker (scan-build) warning:
sound/soc/codecs/peb2466.c:232:8:
Assigned value is garbage or undefined [core.uninitialized.Assign]
232 | *val = tmp;
| ^ ~~~
When peb2466_read_byte() fails, 'tmp' will have a garbage value.
Add a judgemnet to avoid this problem.
Fixes: 227f609c7c ("ASoC: codecs: Add support for the Infineon PEB2466 codec")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://patch.msgid.link/20240911115448.277828-1-suhui@nfschina.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To make error messages more accurate, this change detects whether ftrace is
enabled on system by checking trace file "set_ftrace_pid".
Before:
# perf ftrace
failed to reset ftrace
#
After:
# perf ftrace
ftrace is not supported on this system
#
Committer testing:
Doing it in an unprivileged toolbox container on Fedora 40:
Before:
acme@number:~/git/perf-tools-next$ toolbox enter perf
⬢[acme@toolbox perf-tools-next]$ sudo su -
⬢[root@toolbox ~]# ~acme/bin/perf ftrace
failed to reset ftrace
⬢[root@toolbox ~]#
After this patch:
⬢[root@toolbox ~]# ~acme/bin/perf ftrace
ftrace is not supported on this system
⬢[root@toolbox ~]#
Maybe we could check if we are in such as situation, inside an
unprivileged container, and provide a HINT line?
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240911100126.900779-1-changbin.du@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas reported the vfs_getname perf tests failing on s/390, it seems it
was just to some extraneous '=' somehow getting into the regexp, remove
it, now:
root@x1:~# perf test getname
91: Add vfs_getname probe to get syscall args filenames : Ok
93: Use vfs_getname probe to get syscall args filenames : FAILED!
126: Check open filename arg using perf trace + vfs_getname : Ok
root@x1:~#
Second one remains a mistery, have to take some time to nail it down.
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>,
Link: https://lore.kernel.org/lkml/1d7f3b7b-9edc-4d90-955c-9345428563f1@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Howard reported problems using perf features that use BPF:
perf $ clang -v
Debian clang version 15.0.6
Target: x86_64-pc-linux-gnu
Thread model: posix
InstalledDir: /bin
Found candidate GCC installation: /bin/../lib/gcc/x86_64-linux-gnu/12
Selected GCC installation: /bin/../lib/gcc/x86_64-linux-gnu/12
Candidate multilib: .;@m64
Selected multilib: .;@m64
perf $ ./perf trace -e write --max-events=1
libbpf: prog 'sys_enter_rename': BPF program load failed: Permission denied
libbpf: prog 'sys_enter_rename': -- BEGIN PROG LOAD LOG --
0: R1=ctx() R10=fp0
But it works with:
perf $ clang -v
Debian clang version 16.0.6 (15~deb12u1)
Target: x86_64-pc-linux-gnu
Thread model: posix
InstalledDir: /bin
Found candidate GCC installation: /bin/../lib/gcc/x86_64-linux-gnu/12
Selected GCC installation: /bin/../lib/gcc/x86_64-linux-gnu/12
Candidate multilib: .;@m64
Selected multilib: .;@m64
perf $ ./perf trace -e write --max-events=1
0.000 ( 0.009 ms): gmain/1448 write(fd: 4, buf: \1\0\0\0\0\0\0\0, count: 8) = 8 (kworker/0:0-eve)
perf $
So lets make that the required version, if you happen to have a slightly
older version where this work, please report so that we can adjust the
minimum required version.
Reported-by: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZuGL9ROeTV2uXoSp@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The header files parse-events.h is included twice in parse-events.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=10822
Link: https://lore.kernel.org/r/20240910005522.35994-1-yang.lee@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On some newer laptops ASUS laptops SPS support is advertised but not
actually used, causing the AMD driver to register as a platform_profile
handler.
If this happens then the asus_wmi driver would error with -EEXIST when
trying to register its own handler leaving the user with a possibly
unusable system. This is especially true for laptops with an MCU that emit
a stream of HID packets, some of which can be misinterpreted as shutdown
signals.
We can safely continue loading the driver instead of bombing out.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240910045443.678145-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
