mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-13 07:31:07 +00:00
1,323,830 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Peter Chiu
|
9265397caa |
wifi: mt76: mt7996: fix wmm set of station interface to 3
According to connac3 HW design, the WMM index of AP and STA interface
should be 0 and 3, respectively.
Fixes:
|
||
|
Peter Chiu
|
376200f095 |
wifi: mt76: mt7996: fix traffic delay when switching back to working channel
During scanning, UNI_CHANNEL_RX_PATH tag is necessary for the firmware to
properly stop and resume MAC TX queue. Without this tag, HW needs more time
to resume traffic when switching back to working channel.
Fixes:
|
||
|
Peter Chiu
|
f98c3de92b |
wifi: mt76: mt7996: use hweight16 to get correct tx antenna
The chainmask is u16 so using hweight8 cannot get correct tx_ant.
Without this patch, the tx_ant of band 2 would be -1 and lead to the
following issue:
BUG: KASAN: stack-out-of-bounds in mt7996_mcu_add_sta+0x12e0/0x16e0 [mt7996e]
Fixes:
|
||
Ming Yen Hsieh
|
723762a7a7 |
wifi: mt76: mt7921: fix wrong UNII-4 freq range check for the channel usage
The check should start from 5845 to 5925, which includes
channels 169, 173, and 177.
Fixes:
|
||
Bjørn Mork
|
862bf7cbd7 |
wifi: mt76: mt7915: fix oops on non-dbdc mt7986
mt7915_band_config() sets band_idx = 1 on the main phy for mt7986 with MT7975_ONE_ADIE or MT7976_ONE_ADIE. Commit |
||
Hongbo Li
|
50ddaedeae |
net: dsa: felix: Annotate struct action_gate_entry with __counted_by
Add the __counted_by compiler attribute to the flexible array member entries to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE. Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Link: https://patch.msgid.link/20240904014956.2035117-1-lihongbo22@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Paolo Abeni
|
ed42b2bcd3 |
Merge branch 'bonding-support-new-xfrm-state-offload-functions'
Hangbin Liu says:
====================
Bonding: support new xfrm state offload functions
Add 2 new xfrm state offload functions xdo_dev_state_advance_esn and
xdo_dev_state_update_stats for bonding. The xdo_dev_state_free will be
added by Jianbo's patchset [1]. I will add the bonding xfrm policy offload
in future.
v7: no update, just rebase the code.
v6: Use "Return: " based on ./scripts/kernel-doc (Simon Horman)
v5: Rebase to latest net-next, update function doc (Jakub Kicinski)
v4: Ratelimit pr_warn (Sabrina Dubroca)
v3: Re-format bond_ipsec_dev, use slave_warn instead of WARN_ON (Nikolay Aleksandrov)
Fix bond_ipsec_dev defination, add *. (Simon Horman, kernel test robot)
Fix "real" typo (kernel test robot)
v2: Add a function to process the common device checking (Nikolay Aleksandrov)
Remove unused variable (Simon Horman)
v1: lore.kernel.org/netdev/20240816035518.203704-1-liuhangbin@gmail.com
====================
Link: https://patch.msgid.link/20240904003457.3847086-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
||
Hangbin Liu
|
68db604e16 |
bonding: support xfrm state update
The patch add xfrm statistics update for bonding IPsec offload. Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Hangbin Liu
|
96d30bf941 |
bonding: Add ESN support to IPSec HW offload
Currently, users can see that bonding supports IPSec HW offload via ethtool. However, this functionality does not work with NICs like Mellanox cards when ESN (Extended Sequence Numbers) is enabled, as ESN functions are not yet supported. This patch adds ESN support to the bonding IPSec device offload, ensuring proper functionality with NICs that support ESN. Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Hangbin Liu
|
1ddec5d0ee |
bonding: add common function to check ipsec device
This patch adds a common function to check the status of IPSec devices. This function will be useful for future implementations, such as IPSec ESN and state offload callbacks. Suggested-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Rafael J. Wysocki
|
b02d2cf5b2 |
second round of amd-pstate fixes for 6.11:
* Fix an incorrect warning emitted on processors that don't support X86_FEATURE_CPPC. -----BEGIN PGP SIGNATURE----- iQJOBAABCgA4FiEECwtuSU6dXvs5GA2aLRkspiR3AnYFAmbYvK8aHG1hcmlvLmxp bW9uY2llbGxvQGFtZC5jb20ACgkQLRkspiR3AnbEcw//f45iimYUHFB8Y7dOicmz WRq2GuB/MeBwYum3h7VAsErq51e8Woh/C+YqvKbf6PelrJpsVvvYvGV1RDrqZNjL gtD3YISccm6Fy+43U6p92jqflnjlOphaAt+GJkL55RUhtU5/X66Eja7Q0Nmi3jfp sJu+ozDcPOgaqyWwFdCl0i7vhwwiGsgqPAbsn+1Eu1UOM7++sSY4wfflo0IJnVJo xnLGgx25u/JEBRB+C1cX9gad2KfAMymyslQdoLQDD892njC+HqMhlXj/TX4R16c6 0EvejOQf9wH1gb/l4syw9la+VmqOsloKAtLEQ32P1Rcz83ftRZ0SBDlYfiTqgVGq Yc/oaW4cAoJcj8XW8eDNaYe5HNJozqAYpyFT9u0tkD8pHsfhorE/B4HWjPIWR2bS ZlPAuS4/mnthfiup2Q/9LRPFniz4ex0qzlJTX1AVo0KUIhel+6iXsiiYKqrhDyfo hkbqnneFQJqZNhjogGVWlZS7jlikBpvVhwPDB2j/yGBNZtGukvjwCPt8L+AcjL7S mwa/dXXGs2hFFyeCApZ0oYPgcvxaZLs6jGLZzz+uuOFT8xrWzEhprPRcQIfbtM1r 26xAiy5zY3XqUFG/4kbaXXfA2e7d929j0qX3MMVyl2mucbv78VpFp9vF3uSCnXUm 18k5XwP8OX4P9it/XhPPyks= =VmBp -----END PGP SIGNATURE----- Merge tag 'amd-pstate-v6.11-2024-09-04' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux Pull an amd-pstate fix for 6.11 from Mario Limonciello: "second round of amd-pstate fixes for 6.11: * Fix an incorrect warning emitted on processors that don't support X86_FEATURE_CPPC." * tag 'amd-pstate-v6.11-2024-09-04' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: cpufreq/amd-pstate: Remove warning for X86_FEATURE_CPPC on certain Zen models |
||
Jani Nikula
|
ba2b9de0c1 |
drm/tegra: fix potential uninitialized variable use
It's likely either output->drm_edid or output->ddc is non-NULL, but avoid the uninitialized variable usage anyway. Reported-by: kernel test robot <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/ZtXLyXxew7z6H2bD@stanley.mountain Fixes: |
||
|
Rafael J. Wysocki
|
54fccad63e |
thermal: core: Drop thermal_zone_device_is_enabled()
There are only two callers of thermal_zone_device_is_enabled() and one of them call is under the zone lock and the other one uses lockdep_assert_held() on that lock. Thus the lockdep_assert_held() in thermal_zone_device_is_enabled() is redundant and it could be dropped, but then the function would merely become a wrapper around a simple tz->mode check that is more convenient to do directly. Accordingly, drop thermal_zone_device_is_enabled() altogether and update its callers to check tz->mode directly as appropriate. While at it, combine the tz->mode and tz->suspended checks in __thermal_zone_device_update() because they are of a similar category and if any of them evaluates to "true", the outcome is the same. No intentinal functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/9353673.CDJkKcVGEf@rjwysocki.net |
||
|
Rafael J. Wysocki
|
3c3ee53df4 |
thermal: core: Check passive delay in monitor_thermal_zone()
The only case in which thermal_zone_device_set_polling() is called with its second argument equal to zero is when passive cooling is under way and passive_delay_jiffies is 0, which only happens when the given thermal zone is not polled at all. If monitor_thermal_zone() is modified to check passive_delay_jiffies directly, the check of the thermal_zone_device_set_polling() second argument against 0 can be dropped and a passive_delay check can be dropped from thermal_zone_device_register_with_trips(), so change the code accordingly. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2004353.PYKUYFuaPT@rjwysocki.net |
||
|
Rafael J. Wysocki
|
fcfacd544b |
thermal: core: Drop dead code from monitor_thermal_zone()
Since monitor_thermal_zone() is only called when the given thermal zone has been enabled, as per the thermal_zone_device_is_enabled() check in __thermal_zone_device_update(), the tz->mode check in it always evaluates to "false" and the thermal_zone_device_set_polling() invocation depending on it is dead code, so drop it. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/10547425.nUPlyArG6x@rjwysocki.net |
||
|
Rafael J. Wysocki
|
49029b507e |
thermal: core: Drop redundant lockdep_assert_held()
Along the lines of commit
|
||
|
Rafael J. Wysocki
|
15cb56bd52 |
thermal: gov_bang_bang: Adjust states of all uninitialized instances
If a cooling device is registered after a thermal zone it should be
bound to and the trip point it should be bound to has already been
crossed by the zone temperature on the way up, the cooling device's
state may need to be adjusted, but the Bang-bang governor will not
do that because its .manage() callback only looks at thermal instances
for trip points whose thresholds are below or at the zone temperature.
Address this by updating bang_bang_manage() to look at all of the
uninitialized thermal instances and setting their target states in
accordance with the position of the zone temperature with respect to
the threshold of the given trip point.
Fixes:
|
||
|
Rafael J. Wysocki
|
874b6476fa |
thermal: sysfs: Add sanity checks for trip temperature and hysteresis
Add sanity checks for new trip temperature and hysteresis values to
trip_point_temp_store() and trip_point_hyst_store() to prevent trip
point threshold from falling below THERMAL_TEMP_INVALID.
However, still allow user space to pass THERMAL_TEMP_INVALID as the
new trip temperature value to invalidate the trip if necessary.
Also allow the hysteresis to be updated when the temperature is invalid
to allow user space to avoid having to adjust hysteresis after a valid
temperature has been set, but in that case just change the value and do
nothing else.
Fixes:
|
||
Pawel Dembicki
|
8e69c96df7 |
net: dsa: vsc73xx: fix possible subblocks range of CAPT block
CAPT block (CPU Capture Buffer) have 7 sublocks: 0-3, 4, 6, 7.
Function 'vsc73xx_is_addr_valid' allows to use only block 0 at this
moment.
This patch fix it.
Fixes:
|
||
Arnd Bergmann
|
4f6dc10b7e |
Qualcomm Arm64 DeviceTree updates for v6.12
This introduces support for the following devices: - Lenovo Thinkpad T14s Gen 6 - Microsoft Surface Laptop 7 laptop - Lenovo A6000 - Lenovo A6010 - Samsung Galaxy J3, - Lenovo Vibe K5 (multiple variants) - LG G4 IPQ5332 global clock controller is marked as an interconnect-provider, and the USB interrupt triggers are corrected. Touchscreen description is added to the Samsung Galaxy Core Prime and Max, and touch keys are added to the Samsung Galaxy Grand Prime and Galaxy Tab A. Camera flash is added to BQ Aquaris M5 and X5. The SD-card slot is described for the QCM6490 IDP. For SA8775P CPU and LLCC bwmon is added, audio, compute and general purpose DSP remoteprocs are added, with FastRPC on audio and compute DSP. CPUidle states, capacity and DPC properties are added. On SC8180X definitions for the multiport USB controller is introduced, and enabled on the Lenovo Flex 5G to bring the camera to life. Power key definitions are added as well. The RGB camera sensor on the Lenovo ThinkPad X13s is described. PCIe pinconf properties are cleaned up on this and the CRD. The four USB Type-A ports found on the SA8295P ADP are enabled. The modem subsystem remoteproc is introduced on the SDX75 and enabled on the IDP device. Camera, display and GPU clock controllers are added for the SM4450 platform. On the F(x)tec Pro1X device, display, GPU, WiFi, RGB LED, SD-card, remoteprocs, USB3 SuperSpeed, touchscreen, IO-expander, hall switch, caps lock LED and camera button are introduced. The camera clock controller is added to SM8150, and the GPU-only "amd,imageon" compatible is dropped from the MTP device. Refgen regulator for the DSI nodes of SM8350 is described, and the display subsystem interconnect paths are corrected. The camera control interface controllers are described on both SM8550 and SM8650. The bluetooth node on on SM8550 QRD, SM8650 QRD and SM8650 HDK are transitioned to the power sequence description. WiFi is added to the SM8550 hardware development kit (HDK). On the X1 Elite platform, one more UART, a DisplayPort PHY, the USB multiport controller, a PCIe controller and PHY are added. Orientation switching is wired up for the USB+DP PHYs. RPMh statistics node is added. For the X1 Elite CRD the LID switch and the SDX65 modems are introduced. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmbYwlQVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3Fd2UP/2fq0EEi34Yd3GUpQ+6U6v9MPpT3 AhRzvFDGsRJX/wiDw2N5RqowPHfxK8jzYGF5wwLXaZyQfaM8Be6OIQfg/zl9+yYn 6FqtqM6hK0RjSLac0iYp9Gf0iuKa/MfyAVoigG6oWqGyRWY9FiFwgMWEqUhwAeft oDVFIRJT6wxM1EpzEq67rXfqfZ3ySpblQIsQtkwsw92osx1kHO9R/T2rzgYxfrsF 6ZN99qgBOJ5DQmRuOHMDLy+cBuNaiB4S3iuXnboJkJFu9SmogZt5o/EP6hZViYAJ TC1FRBXsAsa+jrhgFTt2ZHCHcbX0+PfJPtW7FFznNT22GKoXGY5vRXhUaY0Sq7jN P6DwsoB38OKZD+DJe6DPIP2dgbDRJTx0VTYqIa4ynJuXdCtzpSpbdwYNWVH2gHqo q7jItUBDs6/cxqX7p8ArkdTPDaY7I5xibENTb59gsBErjw/z6CWXJEsDBEjsR3bp iJZ6bpDLV9w0zndDbA2u5VMph/HsLpK4w0BWOXC4nCqXq3duF+X3sc24eDRVEdt5 NNnUgXh5yURNdgvlhGPB0tnxwxKsJOWNIjqqfm9aeXl/CoyP1ZmCMHHkUZ5fcMVs ghiGy/hI2tRi0Hcy+vh3/8G5746nXTAJxKegCbseMG/bHS8mKtKSSld3zMch2Ogi 3Rwdau8zpJ1IjFYf =dcCx -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbZhwMACgkQYKtH/8kJ UidKJw//UXXf/ap+0e8dY2++AW8fj1ir8CoZTMT9zuqO9HYtF/CRAv/Iw+rIGy/l JSDyW2JgF+6nbn5hUJGvBeNMIyHKit3WjAAsBEmTqqya5Lo+fDCS4ZHvqoXdgWIF 1OLfQ0JqTcQsmSHqkhqbBgM+YONz6kfUOWatqfCq0PnBmKGAArxGmcFrJHlt9b5+ D1rf0GIgmBD2nCZVfSo5gzab0BlrqYQs0gAGHWz5mg8WPb2fuqlooxBqN/UDUZYM 4UGrgrGTYhj/wLiM9cWtASGuchFLohq7dbBiHYjcwH3KTKI83fPTHF6+iiRZLr57 9eptLpXZbFlFZY+Bou/2wRPvAAGXkdNRrt1wHP6XmZQonRIELZUaw+umKJww3B+w 8JEXYizgsPmQQQu2mtZjYmXoc8GpN8N7l+Ngt4H+ZtSetsDnUX02TnWF7zdY2QUr MGpWwqWkIrnTavbgPL8/rcB0S20++VYoDfwjsnY73PB/HH95VT91fG+uf02Ll+8K VAbJf+ebpYOW9n1SsT9C6CMJiWYjEIb+LumwCYWl3PZiv8URdEWCudqop36OVjUx lTu0829gy0A4iKdQNrEMGEB3+/Yy0wAg7DzkyeVdjKh8iDUOVevJtb1I9PaccNzt nhwrHfvwjzKKriKS+CRosaa0GKNVa4GSfPiLnMKhZ99LVvZLvrc= =zjLL -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm64 DeviceTree updates for v6.12 This introduces support for the following devices: - Lenovo Thinkpad T14s Gen 6 - Microsoft Surface Laptop 7 laptop - Lenovo A6000 - Lenovo A6010 - Samsung Galaxy J3, - Lenovo Vibe K5 (multiple variants) - LG G4 IPQ5332 global clock controller is marked as an interconnect-provider, and the USB interrupt triggers are corrected. Touchscreen description is added to the Samsung Galaxy Core Prime and Max, and touch keys are added to the Samsung Galaxy Grand Prime and Galaxy Tab A. Camera flash is added to BQ Aquaris M5 and X5. The SD-card slot is described for the QCM6490 IDP. For SA8775P CPU and LLCC bwmon is added, audio, compute and general purpose DSP remoteprocs are added, with FastRPC on audio and compute DSP. CPUidle states, capacity and DPC properties are added. On SC8180X definitions for the multiport USB controller is introduced, and enabled on the Lenovo Flex 5G to bring the camera to life. Power key definitions are added as well. The RGB camera sensor on the Lenovo ThinkPad X13s is described. PCIe pinconf properties are cleaned up on this and the CRD. The four USB Type-A ports found on the SA8295P ADP are enabled. The modem subsystem remoteproc is introduced on the SDX75 and enabled on the IDP device. Camera, display and GPU clock controllers are added for the SM4450 platform. On the F(x)tec Pro1X device, display, GPU, WiFi, RGB LED, SD-card, remoteprocs, USB3 SuperSpeed, touchscreen, IO-expander, hall switch, caps lock LED and camera button are introduced. The camera clock controller is added to SM8150, and the GPU-only "amd,imageon" compatible is dropped from the MTP device. Refgen regulator for the DSI nodes of SM8350 is described, and the display subsystem interconnect paths are corrected. The camera control interface controllers are described on both SM8550 and SM8650. The bluetooth node on on SM8550 QRD, SM8650 QRD and SM8650 HDK are transitioned to the power sequence description. WiFi is added to the SM8550 hardware development kit (HDK). On the X1 Elite platform, one more UART, a DisplayPort PHY, the USB multiport controller, a PCIe controller and PHY are added. Orientation switching is wired up for the USB+DP PHYs. RPMh statistics node is added. For the X1 Elite CRD the LID switch and the SDX65 modems are introduced. * tag 'qcom-arm64-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits) arm64: dts: qcom: x1e80100: Fix PHY for DP2 arm64: dts: qcom: qcm6490-idp: Add SD Card node arm64: dts: qcom: x1e80100: Add orientation-switch to all USB+DP QMP PHYs arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6 dt-bindings: arm: qcom: Add Lenovo ThinkPad T14s Gen 6 Revert "arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash" arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices arm64: dts: qcom: x1e80100: Add UART2 arm64: dts: qcom: x1e80100-pmics: Add PMC8380C PWM dt-bindings: arm: qcom: Add Surface Laptop 7 devices arm64: dts: qcom: sm8150-mtp: drop incorrect amd,imageon arm64: qcom: sa8775p: Add ADSP and CDSP0 fastrpc nodes arm64: dts: qcom: x1e80100: Add USB Multiport controller arm64: dts: qcom: sa8775p: fix the fastrpc label arm64: dts: qcom: ipq5332: Add icc provider ability to gcc dt-bindings: interconnect: Add Qualcomm IPQ5332 support arm64: dts: qcom: sm8250: move lpass codec macros to use clks directly arm64: dts: qcom: msm8998: Add disabled support for LPASS iommu for Q6 dt-bindings: clock: gcc-msm8998: Add Q6 and LPASS clocks definitions arm64: dts: qcom: msm8976: Add restart node ... Link: https://lore.kernel.org/r/20240904215752.24465-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
a77498a433 |
Qualcomm Arm32 DeviceTree updates for v6.12
MSM8226 gains CPU frequency scaling support and CPU thermal zones wired up. The Nokia Lumia 630 and 830 gains inertial sensors. Samsung Galaxy S5 gains pstore functionality. A range of fixes for DeviceTree validation issues are added. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmbYtTkVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FzDYP/3XNNXoSdwQpiQgrHYeGSk4HTIj/ zAb/AcHqcvvTbViAokoQRHzr5Z6OO8P3NjnPVMhvHU/lsqPIYOZkmk0N5HQ3nrQY GfENoiG8xdxbJAxbX0xwr/YOpXIhdkBd9YIbMymJFGKL/Y9qkMxie5vb8bDbyBvA iAnUPEybZn+5aRzXEMSS4R7Ua276H2DRhBYGEObC5oGt69m4XRCEjDUeOlx7xlRb AOPdzFInfs+8qRgsWsOMVoXSNVbhaurfop0IrAf4+LTVUpDjy6BRnD3T2uVKFsep FjVoPZ7NVEn9EIfiBpaO+qbYeBEAwjwHHN5jaHu2RG5KjbuzhKbsV1xjG9kPN96s zljrvJqMmCmjiABaR7kGopubajlJ5GeihcObM1mE3Z0PQo6qJkpi4pdUGw+2n+hG 2HQz/Bz4Hip157Eu6phwIQUVtX3xcyZGH/kWqeesCHUgWvj1jTT5X0F/GSj7x6jW t5e4PAtIvby/wecUpk+HucAHQI04VBixTUKB702hsVxexRLoM7Hbe/rIsmK2JPQs dp7MIInMhFU4VWswgoM7QieVwxBGrnJnrYEkGg0JSCmkelEv5Kt+5tY8Fa6JipVy 1PWyi6VvtFxC2ZJssgg71coirvla2h3unFt3zgfAVcLUhJQUHcolOz3zKD9qbrKK VtF0f2KJKy5e7zss =1RD7 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbZhrgACgkQYKtH/8kJ UicvQhAAgxfDqlVChRhqaJ3A5LjfcSpuTxPboeyEAT2ZIVeSiV6j2cw3ETf+Wedd F6XAvIv3bC4bm1qpYeUxXegceP8VqctFDAUc8gzBvI0XcudlGSIKnQi9vS8tExEr Rjc7V6xEepahHRsA2YBTTdihauZVWABfoOzYMrLFg4qzkG+10q/29MtubSF86fNC d/lHlAbKUVJdlF1FMdir2Jffru3SMm6qCv7R3VZxhq82Lmb4IoP/DZtSPaAjwZnX UVN5EO684ADNAbbl6mnvLzQoUSLlEjuCQgFh4g9txlIS/hNP32hgAzewtQBK0bsX YTHDuydcUvwkKkdbwNPfSLp+xNBVAxCBDLgDbme/2KuMTk1maQYICBEMbTTECkMT orkLV5cddgO2Bzj2HnHb5BoC/5SAZndg63hlxfy1/ev+o86FvIu1U66+xwGGdhMN eryGRrufzpgBrCLbLEg5VTK7Q0+iDnvut7EeNQiCJkbr47zmXMFsUWlaExrhYk1l enKJ1DGEdyMFPIkObe5BLI1Xx4jW9klUa2iGc6xxo+Ij6MM8CGHBd3fgyq/QQ54T AHvgXvUSmMT/nYcpFpH6GYoA9Y7Odp13e9dp4ukPfc/8XLILj5bFJgptIwxxMMqk GchBUImkI/Xb93Zxy6sEFElsOkQVfv6jyqKdTHzbc8+3whUayt4= =TDqI -----END PGP SIGNATURE----- Merge tag 'qcom-arm32-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm32 DeviceTree updates for v6.12 MSM8226 gains CPU frequency scaling support and CPU thermal zones wired up. The Nokia Lumia 630 and 830 gains inertial sensors. Samsung Galaxy S5 gains pstore functionality. A range of fixes for DeviceTree validation issues are added. * tag 'qcom-arm32-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: add generic compat string to RPM glink channels ARM: dts: qcom: msm8226-microsoft-common: Add inertial sensors ARM: dts: qcom: msm8226: Convert APCS usages to mbox interface ARM: dts: qcom: msm8226: Hook up CPU cooling ARM: dts: qcom: msm8226: Add CPU frequency scaling support ARM: dts: qcom: {a,i}pq8064: correct clock-names in sata node ARM: dts: qcom: apq8064: drop reg-names on sata-phy node ARM: dts: qcom: msm8974pro-samsung-klte: Add pstore node ARM: dts: qcom: ipq4019: adhere to pinctrl dtschema ARM: dts: qcom: ipq8064: adhere to pinctrl dtschema ARM: dts: qcom: apq8064: adhere to pinctrl dtschema ARM: dts: qcom: asus,nexus7-flo: remove duplicate pinctrl handle in i2c nodes ARM: dts: qcom: apq8064-pins: correct error in drive-strength property ARM: dts: qcom: pma8084: add pon node Link: https://lore.kernel.org/r/20240904193228.15466-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
a0f35e934e |
STM32 DT for v6.12, round 1
Highlights:
-----------
- MPU:
- STM32MP13:
- DH DHSBC board:
- Fix Ethernet: MDIO lines in sleep, disable PHY clock out.
- Add nvmem cells for ETH MAC address (use OTP to get MAC addr)
- Add led usage for RTL8211 PHY.
- STMP32MP15:
- Protonic boards:
- Fix QSPI pins configuration for prtt1x boards.
- Add new MECI01 and MECT1S boards support:
- MECIO1: I/O and motor control used in blood sample anlysis.
- MECT1S: 1000 base-T1 switch for internal machine networks
of blood sample analysis machines.
- DH PDK2 board:
- Use SAI to generate bit and frame clock.
-----BEGIN PGP SIGNATURE-----
iQJRBAABCgA7FiEEctl9+nxzUSUqdELdf5rJavIecIUFAmbZe48dHGFsZXhhbmRy
ZS50b3JndWVAZm9zcy5zdC5jb20ACgkQf5rJavIecIWCYA//V9ksXQIeb5cPDu5t
aINZ6BAhLw090shz8X47GmdLWsbk+TIBotdwE/yBegM514LgcvSjB+POlw46tDPQ
W8fxvoPmdvEPkmXgc1a6lfwf1rGSM8/nQ8MxZblTvv5hhzxMsA2sjvycmE6b7ZvN
AaDq55YMBFLeLXSbHNrjgQW53d/ZoVX7A77UWsWRAs5MUch4pENtmPP4XFYByklV
hd2/XQPmoJzslEQnMNuLt/Ocl/ffr12E1hImRFhZVXUxR30QzviwFnyHXoCpSiQR
ketY0ArEqCZ8oltAQ7nw68rTLT6Uhbk/rIOvQvjc7EILn4LtJvu0KF4hf2gUIjZr
At574mSdVWz+eoMlIi/itFxOT1FmE0HcJKUqqmEcfWX91SdGHBOnDzf54JFLc3uN
yp7GwU5jT2o0/i5IU49fX1iFhpkGLrCCDIceUN3TJf/CUzrzuYX+7DZUAopObF/l
YMt2tGFre+BPkQojCm01fOkPAmDT0VwC8kvuJxHOvHc/UsHcP8bciJh6yAfDrIr6
xQN3c17vwnT+I3/3WuQtnf/yFtn5txBLEz8eXWCrbG1x8g5NnGQME2ShWMfPmnT6
4UZPzvn7f2agbx13yyliTlfBJ5elNGLhjG75Uqbj24jcC2NTT2zBifhOi2wAEIpO
2u5WPp+VmZ2hu4eiy5egjGOLiEQ=
=4haz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=VSZt
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.12-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.12, round 1
Highlights:
-----------
- MPU:
- STM32MP13:
- DH DHSBC board:
- Fix Ethernet: MDIO lines in sleep, disable PHY clock out.
- Add nvmem cells for ETH MAC address (use OTP to get MAC addr)
- Add led usage for RTL8211 PHY.
- STMP32MP15:
- Protonic boards:
- Fix QSPI pins configuration for prtt1x boards.
- Add new MECI01 and MECT1S boards support:
- MECIO1: I/O and motor control used in blood sample anlysis.
- MECT1S: 1000 base-T1 switch for internal machine networks
of blood sample analysis machines.
- DH PDK2 board:
- Use SAI to generate bit and frame clock.
* tag 'stm32-dt-for-v6.12-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
dt-bindings: arm: stm32: Add compatible strings for Protonic boards
ARM: dts: stm32: stm32mp151a-prtt1l: Fix QSPI configuration
ARM: dts: stm32: Describe PHY LEDs in DH STM32MP13xx DHCOR DHSBC board DT
ARM: dts: stm32: Add missing gpio options for sdmmc2_d47_pins_d
ARM: dts: stm32: Add ethernet MAC nvmem cells to DH STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: Disable PHY clock output on DH STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: Keep MDIO bus in AF across suspend DH STM32MP13xx DHCOR DHSBC board
Link: https://lore.kernel.org/r/1091e600-f1e7-4d1f-b83d-c67e8073772c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
76276bfb89 |
ARM: dts: ti: mix am335x cleanups for v6.12
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAmbY9nMACgkQWTcYmtP7 xmXUVg/+LI5vb1T06Or/KaknnzOxpYYP2Jj57DpGMgCumflServ4NxUE9Lbcaquf eaG/ScY/dh/Jh+ILUdmipnHIf1W0sBIUqdgFFgly4NCSUZM9lQmZo+9Vf0KqN3z6 XexAgL6+vSOjm5Hv1ieZ7sBktPv3kxJUl2fyjL9HHPb3S284BMQ/M0g2ljGRyE/b PCVRGSclMAABlQdPoIG2Fw1w6QliX+UFfgS18JbBsqP01lROSEwPgla4PxRqWZiI Qabx38wVgQJyQtLVCrPBxL6Eof2AD+JQRS5hMxy592zoRksf1LjXJJgYZyPq0s9M Q3iXEiZDPOUwLJguVqwNXC2Ni9YTQ7a/WO+SpUMx8/VSpY3w0Nw9T6GSKEy8ynmn U6H+J9fmS4Ehf7syeGvyYBAhPwCcUB9uG9S5KYPhgbUlCxGZeZPmTjOtwwIF8D9r HfoJUxaoZYHfzqvUYHkImg9YX6dG3PmBfohTYfqaIRv6KajRUaww7bGZLW9EV+3i aufqv2+ZaGPG+erJRkeRkM49Lk8SIiOjZ+dA4XExNyJkubnsNZIwVUX44NZTpEhB JqsKX6SdwQovFPnx7rRw194L4219EChzCuwL0HZGd+D9XkLJsRuIuYdryRLIjtkz QAl510ytuL8Oc96UnjNHj0JhdAJgEngNMx5/q0HAOG/TjauYaIA= =t1IW -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbZhkEACgkQYKtH/8kJ Uid1xQ//QXwwkAdcQCSUbq8s+ZLf39ikh0Xsjofs7p/ZwdbmAyvWv8rxFoXHZpcu eIuE7Wqy8a6xb3hMNbQLKhZKKGxH/0F8o1FTxHSffabH1dLDbtl09EK2Ef3JpFMU fw4SXnohGL/eshGCn6zayGnjNEEqHeFBoOzitTHlJ2AqB2dwLeGwefOhFogETQrW yp7i4r1skgCCDWYOPT8xq2UeYyxNugzdJYaKaUUGXF2w3Mw5F1ZTlTHYJ6+qeB7j WWjfI/4OfvgSpOeG3a3NqjI1c9toVv1gqlwFWTNFsTL/ORfovVNcxfe5g58g6I7s bFQ8SKojYHtYCHhfKKkFjXCaNO6Sui2KwXo4I6BqCcwBZs2FHFNWWo2Upby85mRd n+XETdsF1wFQ7eaV3JFZZDdHc0nrUUHdC5MQlaNb9Xh1CuyeIh1FqN/ierRs8rgK lKwSESOHJcPTV7HeBsiXDPgMZKTTX91u2EDLwaYTytAmKWIiGSTwUZZ1aEDEhSDh +QrSaUAbAcIgZPdz8+94HJvWPgCU1C6mXBCaKzy/VN96ry5pSi1R6cajnNezYJCc C8L10YHhHg2hmQIsi/zxGV3AUwV8lpbJ2B2qgu6/nuIX4j8T9KAljzi0mCigx+gY cHI/3kTbUIy642V1eWR9BWCPJqskinRjrjWRK0KPTpjdocUtjjQ= =QPpI -----END PGP SIGNATURE----- Merge tag 'omap-for-v6.12/dt-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt ARM: dts: ti: mix am335x cleanups for v6.12 * tag 'omap-for-v6.12/dt-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap: ARM: dts: ti: omap: am335x-wega: Fix audio clock provider ARM: dts: ti: omap: am335x-regor: Fix RS485 settings ARM: dts: omap: am335x-bone: convert NVMEM content to layout syntax ARM: dts: am335x-bone-common: Increase MDIO reset deassert time Link: https://lore.kernel.org/r/7hh6avark1.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
003729a1e5 |
i.MX arm64 device tree changes for 6.12:
- A series from Alexander Stein that improves imx93-tqma9352 board support by adding PMIC, eMMC regulators, pad configurations, etc. - A series from Benjamin Hahn that enables overlay for no Ethernet device, TPM and PCIe support for imx8mp-phycore board - A few changes from Fabio Estevam that fix dt-schema warnings for i.MX8MM and i.MX93 based boards - A series from Francesco Dolcini to add fxl6408 gpio expander, PMIC thermal zone and USB3803 HUB for colibri-imx8x board - A great number of changes from Frank Li that improve i.MX95 based with many device additions, and fix dt-schema warnings on various i.MX8 and layerscape device trees - A series from João Paulo Gonçalves to add HDMI audio, analog input, VPU, and sound card support for Toradex Verdin and Colibri boards - A series from Markus Niebel to improve imx93-tqma9352 board support - Add support for Kontron i.MX93 OSM-S SoM and BL carrier board - A couple of changes from Peng Fan to describe cache configuration for i.MX93 SoC and add device tree for i.MX93-14x14-EVK board - A series from Shengjiu Wang to improve various audio features for imx93-11x11-evk board - A series from Yashwanth Varakala to better describe regulator usage for imx8mp-phyboard-pollux board - Other random changes on various board device trees -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmbYbAAUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM5bwgf+OU349wE7hZZGHZoCYRymVORfiUXW UtEBwRZiZFX/GH0iOYQZ8oqBtGvC+9M1Lpj4BBFAjSXjtKqPJVfwghwJ1Hw7ubs2 vG7pxtvYrhRDalxCAMpChciKmTJILlUtU2rkh3EKmUB3b5kzXXpV4T0lVHsY6oj7 Yutwi+qXqhKBhPImeCDf6uNbNon8Q3p4sWyeU7U5TprDW2E7zj4VCnAjO5/75emR o7WvH+Qh4Ob8udazOiAlFj1yLVtLR119r4l1hzBII4tkxLPKQ/Fqf1T+KVEimUFi SwreV0H0/C9sH1TxysqKer/bkmiKxzv8aV8m/3uSqRkEntoggz3k4Yy6Cw== =LN+E -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbZhY8ACgkQYKtH/8kJ UidEFxAA2w7e3jYb0sXHv2AvOB2ij9D0KHrw9qVxxSxjpLZW/ggMgBvlkNx06xmK JH7AL4l68PkQWQ01lkAWOxfNnjhy4c2EEFpkqd7+5z6wsHdcAel74Qu/RdT8kB8T I7gljfQvQFIZIF8SqdTD7H0QTmnJpnwgHHjjQCpe1/zuYhVSEl5xDoePJtRrtiCI tlT7I6lwJ52v5/uLs0bjWLaJvU26VvIAb21AjO0xP1M6645alDdGhPTY3EXpXKIP 9P5xyPcPPq+jb8wM3VNU8Kt2vnfZbJxqJi2mTHpMl2JjXKxt+8r+adwwrO9oUSmj QROrGhmRSEJQl64luaapn2I+37/RWNC7jEuEn6URYaYrc4NafLUn/9LNtX2qArI+ EUqX5d9nVHPb5K8jvMgXft7O2VzgtrzO7YcTt3pDXrlhq/a5Q6svO5tBY6ZghZ7b VK3teWkGjc1mIpdWSIdIEGfnBkpC+wJgLS/C8ZdnzyXBwX7zvwpAHet1QpWqa4pc +ehKOvVDpFXhZQ61d4eF5lLouAwzYAFn01fo9pVm8z1XRliVbbJJuCZ5PZYsjtjc qSBo9BVVhzs/ZljBKWrOfVd0N7+6+Fx4y4ZJjdcrKCGodEwfwlHl8iCOn+sMMfp6 Z+cPs24lVlyYnBufCBw5vI8tXexUHom9LG3+W/qP0KVA4Sy84dA= =rArD -----END PGP SIGNATURE----- Merge tag 'imx-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm64 device tree changes for 6.12: - A series from Alexander Stein that improves imx93-tqma9352 board support by adding PMIC, eMMC regulators, pad configurations, etc. - A series from Benjamin Hahn that enables overlay for no Ethernet device, TPM and PCIe support for imx8mp-phycore board - A few changes from Fabio Estevam that fix dt-schema warnings for i.MX8MM and i.MX93 based boards - A series from Francesco Dolcini to add fxl6408 gpio expander, PMIC thermal zone and USB3803 HUB for colibri-imx8x board - A great number of changes from Frank Li that improve i.MX95 based with many device additions, and fix dt-schema warnings on various i.MX8 and layerscape device trees - A series from João Paulo Gonçalves to add HDMI audio, analog input, VPU, and sound card support for Toradex Verdin and Colibri boards - A series from Markus Niebel to improve imx93-tqma9352 board support - Add support for Kontron i.MX93 OSM-S SoM and BL carrier board - A couple of changes from Peng Fan to describe cache configuration for i.MX93 SoC and add device tree for i.MX93-14x14-EVK board - A series from Shengjiu Wang to improve various audio features for imx93-11x11-evk board - A series from Yashwanth Varakala to better describe regulator usage for imx8mp-phyboard-pollux board - Other random changes on various board device trees * tag 'imx-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (121 commits) arm64: dts: imx: rename gpio hog as <gpio name>-hog arm64: dts: imx8mp-var-som-symphony: Add Variscite Symphony board and VAR-SOM-MX8MP SoM arm64: dts: imx8mm-var-som: drop unused top-level compatible arm64: dts: ls1088ardb: add new RTC PCF2131 support arm64: dts: colibri-imx8x: Cleanup comments arm64: dts: colibri-imx8x: Add 50mhz clock for eth arm64: dts: colibri-imx8x: Add adma_pwm arm64: dts: colibri-imx8x: Add vpu support arm64: dts: colibri-imx8x: Add USB3803 HUB arm64: dts: colibri-imx8x: Add PMIC thermal zone arm64: dts: colibri-imx8x: Add sound card arm64: dts: colibri-imx8x: Add fxl6408 gpio expander arm64: dts: colibri-imx8x: Add analog inputs arm64: dts: colibri-imx8x: Add usb support arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes arm64: dts: imx8qm-mek: add i2c in mipi[0,1] subsystem arm64: dts: imx8qm-mek: add pwm and i2c in lvds subsystem arm64: dts: imx8qm-mek: add cm4 remote-proc and related memory region arm64: dts: imx8qm: add mipi subsystem arm64: dts: imx8: add basic mipi subsystem ... Link: https://lore.kernel.org/r/20240904143439.211552-5-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
9c6a3382f5 |
i.MX ARM device tree changes for 6.12:
- A series from Fabio Estevam to fix dt-schema warnings on i.MX23, i.MX28 and i.MX27 device trees - A bunch of changes from Krzysztof Kozlowski that corrects TQ Systems DTS patterns in MAINTAINERS file and fix various dt-schema warnings - A couple changes from Liu Ying to improve HDMI support on i.MX53 QSB board - A series from Lukasz Majewski to update imx28-lwe device tree, fixing partition definitions, reducing SPI frequency and cleaning up SAIF - A series from Markus Niebel to improve TQ-Systems device trees, adding iio-hwmon device, using better compatible for LM75 temp sensor, moving I2C3 pinmux to a better place -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmbYVjoUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM7oPgf9FKYcNHDzVh4X2NFyPvqYJiJrq6tT 8Po/UvgymzF6DkYMw7vDWthYCiH9PUpjk3nP7kv+xSDq4YOfkHshVYbOwqBACeSb XtP5vS9RIVGU6G2ZhQ+lYM3d9Uc3hCRBCRBuCzUg8p7msp0a0gIYQbEOL3bBfBcr KwhOM8nF+LJ4/4L3MUjQPEJRmoHsFMSZXGvVEpFiHNKwh8qByW9j/cPNey1aIMpe GY+/J71qyvEy/lXS081gdec+VM8Y3GpoDPq8EIOri2xqms1fwihIiAcpUNngR8PN REXzRbk0uT9MUwPE794qZxqCb+W1etVUHVhdfxN29CjWW7CYf3yhB6ePrg== =fPHr -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbZhV8ACgkQYKtH/8kJ Uice0hAAr8uenz1Ys+uWXv89+nK6Au5vJKxCXEhAmBh8TwI4gUkp73H4wAkX7TTr q+qT6+mwNW1DewAEUCpF8GxfZOy35XVsvoirjZzbMOB/i1RtF5am9g27tw5Bhf2u TFxD2OGg6lzEoZGMrqjftRq8+pL82n06tFO1kWDqeesrtbkwhMi6QAPyYZ8lNyQY xBFZ13o4fMl4q88WOWz0BaaWHyceoFX53iJFNicuouQ0E3JBq+u16WBOORN/3j/9 4M7hiDQIrvgWw1f+S3ofp/O9k8Z/dBqRyONwPaYWMUFtIH4r7BxvORPRidnXHbUS wDcwusvoSXH47WnPgTgDI7nOp2KZ0Imj0BSmAuAogyRwjmACbrNBSwvtpsXMAS8d mnua8X+m+knzVpqYVxiOm3WpCPKFpt0Wv5BLeuW6TCRt1vqrfAUWaHkotfYhHTH7 sBiteZwgTwuscBSoIww1hqCj6+0F+1KtMVyB5X/KRea+o27bRlXCYww/LPkvsJ2+ PPaoPpUCoQzZ/+hEOCefmEADo2fNQlHcP6oUxIMerevR+CIxklv24/esLG9qdbXL SKZgTGJJvvBkrRg1wCXEmqYJrXFtr8tO52/56c+Vx4gBzmSwJqOJBDzG/u0TWi2w 4BWwbQ4g8sxEYb6a9o4iaLDKlhD7lHNKsEFVn2+ZtR2cqDOTZdU= =QOO+ -----END PGP SIGNATURE----- Merge tag 'imx-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree changes for 6.12: - A series from Fabio Estevam to fix dt-schema warnings on i.MX23, i.MX28 and i.MX27 device trees - A bunch of changes from Krzysztof Kozlowski that corrects TQ Systems DTS patterns in MAINTAINERS file and fix various dt-schema warnings - A couple changes from Liu Ying to improve HDMI support on i.MX53 QSB board - A series from Lukasz Majewski to update imx28-lwe device tree, fixing partition definitions, reducing SPI frequency and cleaning up SAIF - A series from Markus Niebel to improve TQ-Systems device trees, adding iio-hwmon device, using better compatible for LM75 temp sensor, moving I2C3 pinmux to a better place * tag 'imx-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (27 commits) ARM: dts: imx28-lwe: Remove saif[01] definitions ARM: dts: imx28-lwe: Reduce maximal SPI frequency ARM: dts: imx28-lwe: Fix partitions definitions ARM: dts: imx6qdl: align pin config nodes with bindings ARM: dts: imx6sl: align pin config nodes with bindings ARM: dts: imx6ul: align pin config nodes with bindings ARM: dts: imx6ul-tx6ul: drop empty pinctrl placeholder ARM: dts: imx28-tx28: Fix the fsl,saif-master usage ARM: dts: imx6ull-seeed-npi: fix fsl,pins property in tscgrp pinctrl ARM: dts: imx6ul-geam: fix fsl,pins property in tscgrp pinctrl ARM: dts: imx23/8: Rename apbh and apbx nodes ARM: dts: imx6qdl-mba6b: remove doubled entry for I2C1 pinmux ARM: dts: imx6qdl-mba6: improve compatible for LM75 temp sensor ARM: dts: imx6qdl-tqma6: improve compatible for LM75 temp sensor ARM: dts: imx6qdl-tqma6: move i2c3 pinmux to imx6qdl-tqma6b ARM: dts: imx7d-sdb: align pin config nodes with bindings ARM: dts: imx7: align pin config nodes with bindings ARM: dts: imx7d-zii-rmu2: fix Ethernet PHY pinctrl property MAINTAINERS: correct TQ Systems DTS patterns ARM: dts: imx6: update spdif sound card node properties ... Link: https://lore.kernel.org/r/20240904143439.211552-4-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
701f86fce5 |
i.MX dt-bindings changes for 6.12:
- New compatibles for boards: Kontron i.MX93 OSM-S, i.MX93 14x14 EVK, Variscite Symphony and VAR-SOM-MX8MP, etc - One spelling correction on TQ-Systems - One renaming of gw7905 to gw75xx -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmbYSoEUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM5e8wf/XTEkXMRBZSjrHTp6ggh7nCclUTCb lyajBl16Hg+exiDgMKs666EicEtWtdCCurz+dUx1hxCURfPmXlO468uLa/wdJ3i/ KAFT0BKNyrDQHDbUl9fX6kNKLYJgYfMCVpBbbSJsaMBsd2dEyYjZyAJzp/FVmPym /sWMxVMikCsTEmN3vX0EnNBcoIX+gNS8oufZ5GjkUsS60IhsHdxicKy38uBxfXto h1AFWa2e8wRjCkhkL+qyFc26EZ8QzyRjofwIBWUcbiU46yfqTHGG0FAnDIASjqgx mW+ebUUOdSCz6+M3m4rjD9jG93sjCi5L/PGrSQCTQEtJ2xlnXptSXC/9sw== =dm0C -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbZhU0ACgkQYKtH/8kJ UifxJRAAlKI6SbzpyAiM+2RZ6HZ/VQtNky+hMrEwzTzw62bbVy5RLrKlHz7tP62L FmOJtVCe9Hfq/HPnVp7uMbMDZrnl+UQc17AKEu3qlatibcb0XLFtKU+hRveneJ+F iAF2idGHAHQXD6rDxOIh+2iGvXKYiW4G/NdlvFgPBOzCVTfzek7kJ9Ir5G2SiELI nCadLPC0rogftVvKtePuFJdF/aF6PYKMi88Z28g0U2jMd/Ksvlq+BpkT7SkuzeH2 ++KlvPMTUuZYcblJ5EN08f+NllJ+SkcBn495RwovvyTb0e+ysdN3DR+jeUkkjEcJ c2hUfbgN55UlB68uKhogewzLvSyoqNKMJwkFJuM6tRwc4mEGhn77f5tQtlu4b/3w SB9rABlfWhl0hzcr/M2qYlBlFhSi2H8GVoO2KyV0DsiF1048o4t01GsOa+HwwYKb LO80RXIZ5SrKWjzAm1mmXMnGFQCnj9teONK1Hd9hYKEGm3jl7pSIzyYKlmCSWDTV D1VVsWeV+9CtT66kr2p4oFycEPH+tE3gPFPWWnT/qIRdw0LjKPf2TAJmLZ3PUGBD jgIiJm6l2pURVmQfXT4KWUWnUuEtG7BuLNsKJieaBkLNTRBbuHNH6PTqlH/rC8Cq 504UOhVCMhE5zW5W6VyuEAusgCOBPoO8sBCmRZ//Wff0EUjgRCc= =+zZR -----END PGP SIGNATURE----- Merge tag 'imx-bindings-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX dt-bindings changes for 6.12: - New compatibles for boards: Kontron i.MX93 OSM-S, i.MX93 14x14 EVK, Variscite Symphony and VAR-SOM-MX8MP, etc - One spelling correction on TQ-Systems - One renaming of gw7905 to gw75xx * tag 'imx-bindings-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: Add Variscite Symphony board and VAR-SOM-MX8MP SoM dt-bindings: arm: fsl: drop usage of VAR-SOM-MX8MM SoM compatible alone dt-bindings: arm: fsl: rename gw7905 to gw75xx dt-bindings: arm: fsl: Add Kontron i.MX93 OSM-S based boards dt-bindings: arm: fsl: correct spelling of TQ-Systems dt-bindings: arm: fsl: add fsl-ls2081a-rdb board dt-bindings: arm: fsl: add i.MX93 14x14 EVK board Link: https://lore.kernel.org/r/20240904143439.211552-3-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Judith Mendez
|
cf6444ba52 |
mmc: sdhci_am654: Add prints to tuning algorithm
Add debug prints to tuning algorithm for debugging. Also add error print if we fail tuning. Signed-off-by: Judith Mendez <jm@ti.com> Link: https://lore.kernel.org/r/20240904232512.830778-3-jm@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
|
Judith Mendez
|
901d16e462 |
mmc: sdhci_am654: Add retry tuning
Add retry tuning up to 10 times if we fail to find a failing region or no passing itapdly. This is necessary since some eMMC has been observed to never find a failing itapdly on the first couple of tuning iterations, but eventually does. Keep count of current tuning iteration using tuning_loop. It has been observed that the tuning algorithm does not need to loop more than 10 times before finding a failing itapdly. Signed-off-by: Judith Mendez <jm@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20240904232512.830778-2-jm@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
|
Arnd Bergmann
|
8456010c95 |
RISC-V Devicetrees for v6.12
Sopgho: Added DMA controller for CV18XX. Added I2C, MMC, GPIO and onboard MCU (HWMON) for SG2042. Enable SDHCI0 for HuashanPi (using cv1812h). Some minor changes about dt-bindings for Sipeed LicheeRV Nano board (using SG2002, and SG2002 is the new codename of CV181xC). Signed-off-by: Chen Wang <unicorn_wang@outlook.com> -----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEEdoBX2jyDC9ZCTwZjDCzASqG0i0IFAmbXrIgACgkQDCzASqG0 i0L7IQv/fJPlyfiItMzuJvP75j/Zn/vSQKgrnd2Dbg+nfvIZ5f2CSb0L0zAlZNYX E3ToP/MCif55Fom5ySqbtN2YIAiV48PWjejAgztbw0VVcdGAM8q+7opnww/rhwUH pgxgse0/K2qn3oerEWZUEGeokqZ9/SmjBAZBK8Nuw4yDpb9HsAKL0trFMIBF1FTl VGSi6vGqkaHNFAfs5O2M/NClH53owQZ5ZZsL0tC4Tpuv/lIxYwvywLi8bhXDB29J VHP0A5iyHu1QXSyKWhSmxddCdTmG0On//GBJMOeHJOAIGYVg71TzZ2M7zhUVmyYy GrzqsZTWMgpfJlNz2olfyUiGYq6kflKgUBe0yiBd/GAJOhHyYmPY5kAMPu+oJOtV 7Z3DSjCCs2XFSOdlL6kAU0SIqP4UNYpuNLlT2/A2CLf+5C/QyymVD+o5Fe6d9V3K fw55vSazM3OF3kPlZqKkBxTbXs5wZjdThteqbUQu5lzcL4jgUfzKq9bug+Uc2l7w 0OHU/cHf =5Y3u -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbZhPkACgkQYKtH/8kJ UifV4xAAnqnCGQ+aWXFhZMMc2Bq+AfgffKY+qg58E5ms6VY+5wXTxbG9qhvLQ5Gf RFAzs4OP/qTVr4Qpu2xa82Uv4MDaRPR/qcUXd4xwgB5NTaaFdF/Bz7O7EBl+ZuZf vsBD4NUEmDAiUCiBcaR8IICu0Riszkl1mNNPovPrzGOw0T2MxlZa7epFV/msKZXv E3zt5GL6HQ3EvvRqzDA7giYV7mx0BMh+PflOlf4OkhfkFguG5CedUlLztt5HULKD 9bgbINPiOzp4bAEyyEoqywEVAbCPtUZbSvIjmuNXKvclAbQVWFcwULP5AZNs+KEQ DanPQ4TqmtGjD4vwVlz/EKHV3Zgq4S28gVnC2KIKbfS4mbZ/siuPVXMnXIb2caPr jKcGPBoEZpZBSGmyGHXAMlpg8mgQOUX8XyuwlMSqGm1JUagjLa38Fw9oz17OF7Ot CbEZQjF+WL94OMtaKj22wLr/2uBzrNDI0gW8L3OgCk1fdHHtfEbIn8w5tKi/FZCb HIHjtyssZTIvsqr8bgEb6ItShcv2yCNjjqCe86E75pSr44qMt/d0r9OGdIGF3uBa CFGbrVhVWUsTYfL8ihsh7r2rgcy89UfJL8+ubHFLQo9JS8gge/0z6iFloDSVxlcO 3fEcBl6b/f6tn/kJlRHMBzhcrRmnMwavzYIbXixXXi6vOzWIN24= =iF4q -----END PGP SIGNATURE----- Merge tag 'riscv-sophgo-dt-for-6.12' of https://github.com/sophgo/linux into soc/dt RISC-V Devicetrees for v6.12 Sopgho: Added DMA controller for CV18XX. Added I2C, MMC, GPIO and onboard MCU (HWMON) for SG2042. Enable SDHCI0 for HuashanPi (using cv1812h). Some minor changes about dt-bindings for Sipeed LicheeRV Nano board (using SG2002, and SG2002 is the new codename of CV181xC). Signed-off-by: Chen Wang <unicorn_wang@outlook.com> * tag 'riscv-sophgo-dt-for-6.12' of https://github.com/sophgo/linux: dt-bindings: riscv: Add Sipeed LicheeRV Nano board compatibles dt-bindings: interrupt-controller: Add SOPHGO SG2002 plic riscv: dts: sophgo: Add mcu device for Milk-V Pioneer riscv: sophgo: dts: add gpio controllers for SG2042 SoC riscv: sophgo: dts: add mmc controllers for SG2042 SoC riscv: dts: sophgo: Add i2c device support for sg2042 riscv: dts: sophgo: Use common "interrupt-parent" for all peripherals for sg2042 riscv: dts: sophgo: Add sdhci0 configuration for Huashan Pi riscv: dts: sophgo: cv18xx: add DMA controller Link: https://lore.kernel.org/r/MA0P287MB28228F4FC59B057DF57D9A11FE9C2@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
7b6eee4f0e |
TI K3 device tree updates for v6.12
Generic Fixups/Cleanups: - AM62, AM62A, AM64, AM65, AM62P: ESM node cleanups - J784s4, J721s2, J721e, AM65: FSS (Flash subsystem) fixups for ranges - j721e/j7200/j721s2/am68/am69 SK/SoM, IOT2050: Disable of R5F lockstep - j721e/j7200/j721s2/am68/am69 reserve GP timers for firmware usage. - Misc device tree warning fixups: Serdes simple-mfd fixes for am654-serdes-ctrl; rename of gpio-hog nodes; mux-controller node names SoC Specific features and Fixes: New boards: - AM67A/J722s based BeagleBoard.org Foundation's BeagleY-AI AM62: - Thermal throttling enabled AM62A: - Add E5010 JPEG encoder AM62P: - gpio-reserved ranges - SK: drop cts/rts for wakeup_uart0 firmware console pinmux J722s: (AM62P variant) - IPC/Remote proc for C7x and R5F - gpio-reserved ranges - EVM: Add main_uart5 description and CAN support. AM64x: - adc description fixes for dtbs_check warnings - tqma64xxl and phyboard-electra: Add PRUSS ICSSG capability - CPSW Ethernet is now disabled by default at SoC level and enabled explicitly at board level. - USB property to add fall back to j721e AM65x: - IOT2050: Add overlays for M.2, add Eth phy LED description - idk: Fixes for DMA causing dtbs_check warning, Add MCAN J721e: - SK and beagleboneai64: Fixes for inverted C6x carveouts J721s2: - AM68-SK: Fixes for mmc clkb internal mux, ospi partition for uboot.backup alignment fixup. J784s4: - WDT clock ID fix. - EVM: Use 4 lanes for PCIe0. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAmbXKtAACgkQ3bWEnRc2 JJ1ZyQ/9HeHwECIc8fol3KO1BbgxUFyjdV8Qw9l6gEHkvTgXN7rU7enQ4yoRSAr2 ziEr1bRZbGnGsoVw6RQ8NGTQWuXeR9FsxKmE1qmXq2S2v3pELbxTsru7TCmSJxd1 EU5fRS4752sBkGOv0wHb/XHejrRr7IGresSPgEFxxLlgpUCEXfQ17dZneb/dmBzH MwZP7jo7CG3hAaWBwTW+98Ia0QPSkRs5IrK/Fo9AmOeG1yna8AyGjRNGnmFSXZW/ X3idTXKKiTMXm1Xqa2VIUaQeeDwO4ygVgAtsmqrGWr4EvhaASaZvd24GMUcXdhD2 25H3+jqVr0iI92K6uStPi+4Aa+lwveIhf4OqqTRB/2YTE3P2gvwAU+HBsQo8MUfQ KyuSmZBsUB4yXlm3kY5rpOoZPnzyk+37IKKawM5+F+USWR8+eXccSSVrCBTq4syQ FhEpKOE+ARByFsSWj1D9rHpvArWHASUtamrIbKr007j4L6UQPomzt/60K59Dx696 z67JQX5hkXydS0GHgUlzDy1PfAgIGT66WCeuLvxol0g8unDxB7KfLJBLBqU/zOcV nbWUrzy3wKL+zrNWMc4gkEk6IoSql9KT99ZcdARKi5xdn67GRcs6tMv3Mq/WDVfA 2fqD6pxLRMdAW38Qqmm9OBAqkbc9rBdAmCH28Yqi56wB88nqfYY= =7qy3 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbZhOkACgkQYKtH/8kJ UicZkhAAhW8qCvJBDrm4FtmQASBzebDGZTGzeH1B8A/K+Fd0FY2ffKRXu5lkvJdz anWcos6K8GYhGHSuX9iOQNKqBYFSEA9zi3qTfYlCWYe1gBpweqaKEpmStEuqhJg/ uz6ZodxP24eWTrlc6loLERF5kd7VrZho+XU4/p7kmkJl6X/LgHrzjK03/8dze9nV 7tUZo6uYRN3ngiXARiWTs76sfT5AURZ6Kjb90fPsLb2k3uKc1X+gksoPNJvZ3Y1s dqudnFETc/Ppq7lFAOJrSY18kDeIUtJ5BY1FKk3hzytS91ofW2wDUEHBlneF5zdL JE3GZ0pbd/JkzRre74NqIH6kIx9Ss35fyPOfR9EWAD6vo+4kZf0vOSCDaOTnfXby TaG0r/awMP1aEcrFGmTmHLAlURHsXDFUQmdsu85tdrtQAL9grK9DOTbiATNH1X/o C/TnUdcZiVATcx5yfwiOkRSgdAKdZRhjuQG0JtPwJ7GWMxPE2t6Kvyt6NzqWVBCD STD7xAtdPzwE7CoiC8jy0Pb25Btv2SQ5WIfEG9zd4XHeziH3UqkPD62xkJhzKzsj kMFSB6nsWoBam28aFUQEgSRfe/DFu4zaC6JMk3ZPQhXlpbclFaW0ptpne+OrFbMw FqcFrlHlC3K5MgnRfhZsEGR8kxx5ffOd0UqnafplG8AsmwFoVzs= =cyoV -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.12 Generic Fixups/Cleanups: - AM62, AM62A, AM64, AM65, AM62P: ESM node cleanups - J784s4, J721s2, J721e, AM65: FSS (Flash subsystem) fixups for ranges - j721e/j7200/j721s2/am68/am69 SK/SoM, IOT2050: Disable of R5F lockstep - j721e/j7200/j721s2/am68/am69 reserve GP timers for firmware usage. - Misc device tree warning fixups: Serdes simple-mfd fixes for am654-serdes-ctrl; rename of gpio-hog nodes; mux-controller node names SoC Specific features and Fixes: New boards: - AM67A/J722s based BeagleBoard.org Foundation's BeagleY-AI AM62: - Thermal throttling enabled AM62A: - Add E5010 JPEG encoder AM62P: - gpio-reserved ranges - SK: drop cts/rts for wakeup_uart0 firmware console pinmux J722s: (AM62P variant) - IPC/Remote proc for C7x and R5F - gpio-reserved ranges - EVM: Add main_uart5 description and CAN support. AM64x: - adc description fixes for dtbs_check warnings - tqma64xxl and phyboard-electra: Add PRUSS ICSSG capability - CPSW Ethernet is now disabled by default at SoC level and enabled explicitly at board level. - USB property to add fall back to j721e AM65x: - IOT2050: Add overlays for M.2, add Eth phy LED description - idk: Fixes for DMA causing dtbs_check warning, Add MCAN J721e: - SK and beagleboneai64: Fixes for inverted C6x carveouts J721s2: - AM68-SK: Fixes for mmc clkb internal mux, ospi partition for uboot.backup alignment fixup. J784s4: - WDT clock ID fix. - EVM: Use 4 lanes for PCIe0. * tag 'ti-k3-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (57 commits) arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communication arm64: dts: ti: k3-j722s-main: Add R5F and C7x remote processor nodes arm64: dts: ti: k3-am68-sk-som: Update Partition info for OSPI Flash arm64: dts: ti: Add k3-am67a-beagley-ai dt-bindings: arm: ti: Add BeagleY-AI arm64: dts: ti: iot2050: Declare Ethernet PHY leds arm64: dts: ti: k3-am65: Add ESM nodes arm64: dts: ti: k3-am64: Add more ESM interrupt sources arm64: dts: ti: k3-am62a: Add ESM nodes arm64: dts: ti: k3-am62: Add comments to ESM nodes arm64: dts: ti: k3-am62p: Fix ESM interrupt sources arm64: dts: ti: k3-am62p: Remove 'reserved' status for ESM arm64: dts: ti: k3-j721s2-evm-gesi-exp-board: Rename gpio-hog node name arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names arm64: dts: ti: k3-am654-idk: Fix dtbs_check warning in ICSSG dmas arm64: dts: ti: k3-j784s4: Include entire FSS region in ranges arm64: dts: ti: k3-j721s2: Include entire FSS region in ranges arm64: dts: ti: k3-j721e: Include entire FSS region in ranges arm64: dts: ti: k3-am65: Include entire FSS region in ranges arm64: dts: ti: k3-am64: add USB fallback compatible to J721E ... Link: https://lore.kernel.org/r/20240903155701.q7soxtplbkfofwxt@entering Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Detlev Casanova
|
7e856617a1 |
dt-bindings: mmc: Add support for rk3576 eMMC
The device is compatible with rk3588, so add an entry for the 2 compatibles together. The rk3576 device has a power-domain that needs to be on for the eMMC to be used. Add it as a requirement. Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240904203154.253655-2-detlev.casanova@collabora.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
|
Arnd Bergmann
|
5d9e36498b |
Renesas DTS updates for v6.12 (take two)
- Add support for Ethernet TSN and PCIe on the R-Car V4H SoC and the
White-Hawk (Single) development board,
- Add display support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVk
board,
- Add I2C support for the RZ/G3S SoC and the RZ/G3S SMARC EVK board,
- Add support for HDMI audio on the RZ/G2L and RZ/G2LC SMARC EVK
boards,
- Add initial support for the RZ/V2H(P) (R9A09G057) SoC and the RZ/V2H
EVK board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZtceEQAKCRCKwlD9ZEnx
cE75APwIoaxcGqJtBI0qPUt2h2zSUPlRxGAE/PJI9mghY4JRmQD+IYyj9ovxNlmR
b4xgOpKvHnYou8UK2p5289wbFLVZgA4=
=QPgq
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=tnwU
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.12-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.12 (take two)
- Add support for Ethernet TSN and PCIe on the R-Car V4H SoC and the
White-Hawk (Single) development board,
- Add display support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVk
board,
- Add I2C support for the RZ/G3S SoC and the RZ/G3S SMARC EVK board,
- Add support for HDMI audio on the RZ/G2L and RZ/G2LC SMARC EVK
boards,
- Add initial support for the RZ/V2H(P) (R9A09G057) SoC and the RZ/V2H
EVK board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.12-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
arm64: dts: renesas: r8a779h0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779a0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779g0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779h0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779a0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779g0: Add family fallback for VIN IP
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable watchdog
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable OSTM, I2C, and SDHI
arm64: dts: renesas: r9a09g057: Add WDT0-WDT3 nodes
arm64: dts: renesas: r9a09g057: Add SDHI0-SDHI2 nodes
arm64: dts: renesas: r9a09g057: Add RIIC0-RIIC8 nodes
arm64: dts: renesas: r9a09g057: Add OSTM0-OSTM7 nodes
arm64: dts: renesas: Add initial DTS for RZ/V2H EVK board
arm64: dts: renesas: Add initial SoC DTSI for RZ/V2H(P) SoC
dt-bindings: soc: renesas: Document RZ/V2H EVK board
dt-bindings: clock: renesas: Document RZ/V2H(P) SoC CPG
arm64: dts: renesas: r9a07g043u11-smarc: Enable DU
arm64: dts: renesas: rzg2lc-smarc: Enable HDMI audio
arm64: dts: renesas: rzg2l-smarc: Enable HDMI audio
arm64: dts: renesas: r9a07g043u: Add DU node
...
Link: https://lore.kernel.org/r/cover.1725374275.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
Avri Altman
|
819e4b3723 |
Documentation: mmc: Add mmc-test doc
Add missing documentation for mmc_test. Reviewed-by: Christian Loehle <christian.loehle@arm.com> Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20240903133855.3589845-1-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
|
Arnd Bergmann
|
e4a82810c6 |
Qualcomm Arm64 defconfig updates for v6.12
Enable the Qualcomm refgen regulator driver, being introduced in SM8350 for DSI, as a module. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmbYtwMVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FknAQAKKr2TrvulVLjax5FYJmEC7olczJ M7FGR4NigeQvRrxqNuPyNLyMrp/S+EEj+b/FonxdIATtLgkE/wQ4EeB7fJWQf9VE PrZG81HZG36d+8JTBJgSz02YEzDl48Y4lSgPGCfekGoPx5FVYFeYLOA4LCXGcB3w CyMWsajBTYDUQlCcSo2qtd9x1hEnupiRord2xmmquxTlGmLtCC29i6GUgIDweE8x oxcRA45jCZAfa1SmLOmD24zvlEcB6gqiY861/wO0Sq4nKMwHE0F5NqEdTXXNeNlG AUfuKK/OstgR8vwN7PtPyGerazZsOK/RZfV8esq6GNeKcadXHAqKge/6PxxlkS3I FjN22IlGWlPh2O60t51rYn1m8lEIp57EHPWcYSX5c/VAXi8pAh6BCAjHGAyj/jzw /xb6gVOipFZED72FjOuJL0lwhRiyZpMc72XBI/owdaB8TeRzWue/FAPi3xmKF0sR cv8+H1G3r7F1Irv8vxnwwpvBUVs6Q4PsM6ROT9/mLD7PEO/E+qr0RZP0YInCMzbK 9sEm5L5mUmkGtvHhHu9ez7RYsvpeQPtaDtbErKVFxISjo7sSNJ2owm9wJvn2POm3 u/nlFkliLTxnV5fvhDEN5XrCvVLNSlkc3S+HmAmtYphaWjKp9mJ/tdLnkfVt8Aal QOewvo7VhBgVBclN =NT+a -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbZhCgACgkQYKtH/8kJ UicECxAAg/nMerE8HavWavcqR2Uey/7Mqo6lHPM2jBTH8gHcAOQncAx+qTq/cTcj 5nZg/U3arlOCJEd1Ggn7eZWOWlxUOXQ41pN2Behsx9XObvervnfgqBQjIXF+J0Ys KZMIH3slmw0vs4aDI05zA+Sp+eJQm7B5eEkOB3gH2CtDjGr7x03+GqeSRh46kO9A oM1DfF6Uf9XVsKw/PV9iCTBFeKgbzwF58V5YIQq/ExIWhMyk21vZUG91GFUENzQa hvITEJvYzgpj2q5nUZBHm2DNbJfBOB5gjCk7LUdevXRZ5UbvjYkV100suKGoEto/ u/DGfwCExUErjFd6qcii2ksIr+PDlTPRMLL1mTqBUB9ZepSB7A8VH9BCSrezL2oV 5m+rZu6UGVaz0RIXbg4mO5KmVj0L33IsR7+2b7scyhYYhVxijIJeheNfO1YjasMy 3o8mKz/5L6bIx4w9kf9MnKZ/faS0YWNK/XV6FhqoWU1ijCqGvL4jBLMFip2vHVZX 84WGmqtG2qcAlYm47TWKNCKjVXYLYsEKzxAAoGsez+3z0/i+shoNCuDtIGgh33Yr L/dR5MOdlBOqBeHNHhRkKWg9m2xOpVg2oRdWMA9MhL4mYV9N+xrKRYmYTeUHMxZP HJai//J5a4kTQk4RqPtVdLqxf5IzYylGDtYKRC772kA7F0qxCnw= =FHJ3 -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-defconfig-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig Qualcomm Arm64 defconfig updates for v6.12 Enable the Qualcomm refgen regulator driver, being introduced in SM8350 for DSI, as a module. * tag 'qcom-arm64-defconfig-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: build CONFIG_REGULATOR_QCOM_REFGEN as module Link: https://lore.kernel.org/r/20240904194827.16766-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
d32d0c26ed |
i.MX defconfig changes for 6.12:
- Enable ADP5585 GPIO and PWM drivers in arm64 defconfig, which are needed by i.MX93 11x11 EVK board. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmbYbXIUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM7mpQgAvNtDGFpddY5F/DnDgmebNBo981Xc sX9v+8hjimuxdlVhuFh2CeQT737SCMzOtE0MMtg/VYh0Lu3cLISOuFxEZ3TCuUa6 zkmNKJTp5DjNYo0/QLwbuqiKgRIux6eaFMx5AXXBLUREXhgZrxUBeb57yI8K+hog M40vDZ2Nm0rZrvN/Qh2lMdk9yV79ll1K9zukBnedqq7T62Ipyl0IYlFbj8suqlE6 tgHDCvOY3qZngO7aXowhW3LHjrInXNLdyLycFJtVKPfayF17pXGQJD04a7q2pkJi nuCTGKcsfbyzZJTNS85DcedAw4pJMRG9+71zQfY71EOW9usY0Zc1utHWNw== =oSYa -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbZhBEACgkQYKtH/8kJ Uic/ixAAmzk3MSKuxn8aSE7BZn/qcIATLlhRPnfuZRZdbne0CWxkkAI0lRUjuwxL a1Epj3BwvLbwX+3/wyhFFoSaXdCs+O08zQaauuN80SGf3C2ezLym4PZ4DumrL5zR EdbXnbqvMp6YVK8+uBaYnbIEUw6KFbnwoXGYLNvn+ndfvoR739efQOeampml+1nw L4quOuWBLD3VxbP0hh8YME2Wfeu7W1iR5KrHN5ykSIMq8h5xsBdyS+v5B/hifG1m penmV4jxLOHIz9IuaSi3r4LEuow3oRQdnaMHAgdL0NXRg1uFB9yK8PbwtUWMvNVR 6/kEXSmYLwA6t44s+pMhfyk+qLgdx8ZFUxMkdmiQ+i4mVeYXOG1un41DoB9DE3EX 4pEf7rDMsc+buryRbZl9O4w1ky9u674QingaDkKAT8DMo79N0I6qmGc2jsbkYsMy MUDejKoGzHysMs+6JatwQEh5S4ufzL2aJbfRtW1nD80Kii8qUkgc40XcwPanq5/s BPu8RXsngycarpNoe8aU8LxnnxVm3UaMvaFBJaCdGUEqr/d3AdJTzvm/nHw4arrN zWYNLZiTss1rmlnazm86ucpnhdgeoQz9hSwCzYnGgY92+cCW6NyAK6kGbMJFyW3t jNy80McjfCcAgKBgBc+SSkY+knfWuSB9HHYFOGPJmwvB5Gmn0uc= =6iSo -----END PGP SIGNATURE----- Merge tag 'imx-defconfig-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig i.MX defconfig changes for 6.12: - Enable ADP5585 GPIO and PWM drivers in arm64 defconfig, which are needed by i.MX93 11x11 EVK board. * tag 'imx-defconfig-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: Enable ADP5585 GPIO and PWM drivers Link: https://lore.kernel.org/r/20240904143439.211552-6-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
714dfb9556 |
TI K3 defconfig updates for v6.12
- Enable E5010 JPEG Encoder as kernel module -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAmbXKdQACgkQ3bWEnRc2 JJ2tkQ/8C+ldmH7wmyjWQCJlz3JSMgf/2T0ji5NWs+2L5U7JXEUuKXwmZEDZPq6Y d9EA2wzVuHLCEX76oeb0QFdBf2XSpjhf6bzhog9zcjpHGiJYuY4f7ewsDCm08xKU 81pWaWODYYcAideNehzwI7VCDZuXFdoXIfq3nQ/bJOreOlYO2Hf+jJI42Rea1AfO k72W5L/Mrdhg74xSE48fbU14yTlVa3GBb18tec/iEEUdcQNpm138Z0rOfr6Knfgu j5NpAorp1O8ciyfdth2sIc+8rFicTEocH08xMsn3xJCvsiiTjYQyEnr99Bm466o0 mQfNaScsdzPpE5TiwWql6PQWu8wK8HREzUL6BzbGxkXRa7pzcdD3CXnfJap7uxFj wUJaSzsDSFyHcQd8SAzLQBapQGhbb2kZ9UTFeeEAUCZQNSqT/vtfwOm6fNAln4wR hLiPIwljBDWXvlxMv35MNIPcotNjsMuB4NW8RhaOzyP6njDTCktf8xoNCHUEoqgn kKXTtRt4CWs1qfdMcfQWO6Sz4CDDGndun8MXJozUGrR8M68TvzONbU+yvmHag5zL 70NIi9SSzoCudy4OW7ECLEAFMJ1TSm4K74nfu3UwHKO1mrCmSxOxMctYo2E7JAx3 /gQIIB1Vx6lrrA7QQaW9EYQdb0dnzR2alnjJeX1Zr3WLTtNhHqk= =vxmn -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbZg/YACgkQYKtH/8kJ Uic6bQ//ZnOsB5C9iLX/c9ml6Rxn7cySC1GbD8iiRMUL2icgzfotfAQlKG8J9agG Tu+koOn1dn2jwiZt+P1/dlXcd5Yi6PdsMuC94utxHoT3uJVM1q9JdqyxQXpvOSHl iBScmq+8jZryqiP3NR2WkEAxJwdsb15xT6EpDByOskr3ir214uI7Wh+4TAfaDwuj evse5Wb83+Q7BhIMQWQ/PYCa/elbKWVOrp7A19ZJGVeU/JGsaM22SaVIuX16+l2y B8NeXxMTlSzI1xUcJjcxfbB6dsnPU0/I7RtvP23KFeElAUNexgfrHFAX6dR++IIW ptBUoO45qpbTwyW/aqwQGHfzIjdqaxia9EY43wjTmzeC+VRiI5Jl0fYteaFYrQ5u AkbFt+lmXGvupci3RsSt7RK+qexG4IbS73NUHNb55PsYo0SVo3moPDdZSzLZdirE 4m6puDEEtJiXjUSMzA6dQiIktotfKyBWOWLmkGrUKplZ1DNlOIm5hvn02KFLqWi5 eTxiiHCqPGnkTNMVW6cMsLbaHC34hJe67DeBmtJdqmVXQ29JccrDc9yKo+6/oJZO +akl41T9SDgpn2TyFaDv9CT66PPRptoUKYmVBVrH6RGHrN4cjJVkrmwi8vpCIHjz 1JC2qXUk4VDD+vk/GlEfcW/EwC7db3QuKskMgHraba+q83cLwaI= =6ZCp -----END PGP SIGNATURE----- Merge tag 'ti-k3-config-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/defconfig TI K3 defconfig updates for v6.12 - Enable E5010 JPEG Encoder as kernel module * tag 'ti-k3-config-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: arm64: defconfig: Enable E5010 JPEG Encoder Link: https://lore.kernel.org/r/20240903155647.jy2uparewobeekrd@dreamless Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
35e834e812 |
i.MX SoC changes for 6.12:
- One cleanup from Fabio Estevam to remove Ethernet refclock setting from i.MX6SX machine code - One change from Nathan Chancellor that annotates imx7d_enet_init() as __init to clears up a section mismatch seen with the recent LLVM -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmbYRz0UHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM4JzQgAt5DItWMG+lOgAdxkuVpydzgJ4i3i x1cxOWxzV+8//JVZoFVNFYtZJlaJ4lnA0zjI/in+rz5r/vz6GOVlsSIUzVn+ayxg MBjqvMuPcggZR+dC7ckUHdEXUB1DIbcBTtP/8IqkjXFXz6euej6gDcheU+QX/4PY yTGiCj6dXC2AzSYo0SUwVGbkgKOqqyFP2dkgAQ+SgmhbXX3FyMOc1OgoQjVXj+Y0 FSRe6xjj6Xn7BmUPLbebws0jG8jy7tVKaVcquPnvF1NUZLFT1UzdwDENu9raKobQ LbkM0XxuU66pNYPDvH3HhOESzt5l6Yt+t8v1oNRJQ6H6EQkVA3cui9uRbw== =8UNt -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbZgpsACgkQYKtH/8kJ UifA+hAA2mc+Z8meCTMHCSoM8v9Va5kp3RJuIPKWVz99yoN7+k8N54l1TISilHEm o8TDQU5ySXQjLo9eaa8tgoV9mzyIV2JkTKpYzSgFEy0Q1RKsttNaHI3PYKJ3as8M CPy2mcupDW9Cwh6lLJ1rzLS/G9fB5vsber0rg0x1DIvXVr3MofkU1OxwOOUa5qTg fV/2b1I9B5JjSIzWRR0EY6ws+4l5XE33KD9Q/Ak//bWzTWI25D9w5jkZ7iPiaBtd Q+jEwh2eGiG5QNc8AsvMGs9/GBzj8eZfDbbHYBfHnhOV2w+tPgmqzzJEtNd7u/tc KhEFEiiXygUIk2uHLHJmMsMUF6/63btXkm6INMVLeKuzgmxkAIqxpub2ich+m/Gm gfqBmS5bu6mO7WxTrlxdBOxL1XG/hzN9PUR6tRHgbaIrCn/2vPfmEInlpw3SDWtD 0Vxpz9dwnZQRCH7/SGH4dRu7xOwjo2ANPG6NnaUo1uP3piqZxaIAAWuz7T6EGfBq ny0BOliakXgZ1OmWmcKj/fjxutqk7T+Nr+yKybGyzc1/R7wpkL9jS/eC1w6ijIoU jZVRcfZ91HdRUfYK5BECQiA1/kZnM3RZwVffKOp1gjmM+ygvpwGdDYFOWo7R8tPr iY3CVRjSVd96EUgtCBsyGuY/XtW9oDww0hM6G9t4S/IvGNsuHVQ= =09E6 -----END PGP SIGNATURE----- Merge tag 'imx-soc-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/arm i.MX SoC changes for 6.12: - One cleanup from Fabio Estevam to remove Ethernet refclock setting from i.MX6SX machine code - One change from Nathan Chancellor that annotates imx7d_enet_init() as __init to clears up a section mismatch seen with the recent LLVM * tag 'imx-soc-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: Annotate imx7d_enet_init() as __init ARM: mach-imx: imx6sx: Remove Ethernet refclock setting Link: https://lore.kernel.org/r/20240904143439.211552-2-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
350d0f012c |
Texas Instruments DaVinci updates for v6.12-rc1
- remove unused cpuidle code - remove unused function prototypes and stubs -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmbVtMAACgkQEacuoBRx 13ISbhAAufsanJ/4LpEiBpZflqVG47yv0m7t0syYsq3ezebQlgzlAOi4K13mj/vL vnyFjSSuBWG40ETU1sjpb3kVXj62MfF6FXXxtAM0rwHUu/e/mZHEEZPDt/sYkDhH GwatEdGTzrmE37Ua54pBRETtllGtt4Q6AIaMsI1YEKy2kTwOtzZXArg1jKr6w4ZN 4tJjhpCq+iGrEreZXu/FqNdh7DT9VEewsMjWWuXCKNLIuyGtFtiz9l9N7TOixSxS 9VeRa8yPbOV9GEhp6rrBBSOwySwb7oeJQ4HNAuTXgWZ8CYR28OgSGGDt8azaexzD RFj6xeYOnO1/Qq4pEfyjJh1izufLHlvYvBp6dy2GWIYVKmM9c2uY3z5fJn4wJNEk Ltn/xyp7NF5qnvlBiQhomqdYimHvFTyikro0cKe+BXKIZ7b0+vU+vaeeCntDhywD fABe6Cn3nsT5Bwk2P9qSA5dcuweK1vu/j/8+SIaJ44j1lD0BjjlwTwcwNEepCvwz R86tSCMhZlWZhn1wY9+rS/qafmfz6x6ZK3yqgIQ3tunfeGFCRwUmS31JyJ/y/vuI QM3ULt8XfHpOifedIcjychyaBaCFxrg/GoV3seFgWpbya8xxOZxpTg9IxbhYRXz/ JRb8RQbF33sFmVMZwJi4b/Hd3gqOsFb5k3Fy97m/atc8//+bD14= =G3QV -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbZgnoACgkQYKtH/8kJ UideUhAAyFzWzEMOAUgexXDWEFaKSNW+bebPvGcRnNgcYi1uPSdFXFabnxPHpwR9 B2PjBcgoC2c85BNc8xIrn+qrSszSuvPFNygdB9HUvRtChPHrJaJFLdsMHZtcb9j7 tyTd9uPYQy3xcEE6TQfQzrDdx69+fU0TD68umdtjSOcgMfTv9UeJstr68tgobAjB HpdEMQ1xS9YrXpMorgs1SRcfSXMwmtDkkHmAmYl1UqKFnVG00dSrKrr2Oh3fXjuE TUbZgig1MIuVPVhVnDnhE1B9wMkqk2tNxR1RwO4q1yKLtcc20al4C0JE03N9Wj/w HPafDG4foh91ue7RFsjjjzabUT5csLyMljBsHvgwogRl4dAg+IrambqKlIzDPwvB KgP8vzX8PGti9Wr9/FE8QSTVhORst3IScyiphtPctIvc2qo1Z28DyujDqyljazM+ bpB0lxoeRTUZx0BtaV22NSkP4sQM/MKD1XhctHspnAH4T47BEBCSrxOLgwOocJ2v 3A1RLf+e3YvYO180ltRtYjvuFJCvUMgvndBS17PQjPTBQ9MhgVPlTS6IrPEytYtB amq6emB9Tnz9htR9TisuWjSkDOvhchvhzkfwu11f+Cr5i+nuRWyZBkpYhuYCow76 y/K7Wf/v4HtIgstp+VzqymB74uJbjhSyDZItPvP4aE+TmXLEA6I= =4q2m -----END PGP SIGNATURE----- Merge tag 'davinci-updates-for-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into soc/arm Texas Instruments DaVinci updates for v6.12-rc1 - remove unused cpuidle code - remove unused function prototypes and stubs * tag 'davinci-updates-for-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: ARM: davinci: remove unused cpuidle code ARM: davinci: remove unused davinci_init_ide() declaration ARM: davinci: remove unused davinci_cfg_reg_list() declaration Link: https://lore.kernel.org/r/20240904200530.80386-1-brgl@bgdev.pl Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
d4c3179671 |
ARM: OMAP1/2: misc SoC updates for v6.12
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAmbY9nMACgkQWTcYmtP7 xmWwDQ/9HP7y444tT7u3BRfVitZRs8axEZzyCMnkxkDYqYI7ROLPDfLqmNvq6PCM Rk3+JE55WerR5yNqb4RPYy+nEJ+yB9cBokMH+fA7IAIz8LNw/M7efh7bd4Kr/iQn PxsdUQyYd5KOj3X+Ge13YMqkw0FJin5O0w1pNy8JU1Uo383BAjcuX/977utjCcqn xeArSGxvZ5v/LLmcAOXF+OtI6Yf/XxMtYUc4f6S0/qE9kAV6pN4MxfaIaspB2d6j oZrWr2vpHrPa8sRjz3TUgjS6aQneVjGW7kr8PEPdvFZ69eTI5N6Bo0HC6s3IjFT+ BkBULF7v3D7QK8DXtBrLrCJG+63ZGD1yexcaB3Hd07mRsc8tsJuPad2PF6yQLhRV GMfbf80Ny3Ld2PMCofDzv+BN34LHru0sag3lN9F7kTD2JDCPouXGTebhTuwQy7op jRo4uaHSo6pHeHLVQb/jrk2Z1jBU4noAQVHCWsjy5ouGdvDux9NNCtn0rpVbW3NM iDXbv02DwDcj3UXvSUtPNO5KSXDf9D9iN4edt+4EVq3udGBtxnBxw4i+qigZcrxj 1BMbByK6Z/rhWYtDOthBV6m7aBQSZuP0nNqYnXjkE8Znr1SZGEoPfxfORkLrjqyl fSbhqknwxmisWavdOLs3fCHjIMtWsBK0bO9u+KX026/S6gBAX58= =UfU/ -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbZgmgACgkQYKtH/8kJ UicDihAA36vNrq7yUvIwx9W8K9rCIDJOcJ1K0sRp+csefIHe1ZDN0Y009ZWU5FNP bbEk3FBY2xH8FWgEhs/VUSUKk2nyGDa2sMuym3Yk2hN0i/u+7fql0ePAIYgMQzn3 l1t8wGr2Muey6QnSNymZ+t0qTDO43nCz9qFM37KFsc2RYUpJVcnhCi+3CCMHbSy2 ibdAQ6xMHCkfZfgXskCXIvPbg8TCOM1qX6yptj6O/Klc8517whlnbibBLLqoMVJr Gr2TWht9LLKP6ZY+qQ6GXEJMDtEcJsO8NNapdQZcc8DY+gDtAvqNWS8tWHZ/ijpJ Y6iTfqMwyhDTnPKGRiOl+OYoy534rDZPu0nsWrKc78OOeLWgUDwkLsnU6eR3bVvr swLDOmY3fHR8dyuuQszyO1sKbun6vfxPwRrUaHpR6QPIClHzVCOtuCd5ckfTyFUI DOeDt6fck0pn9Au6gxRhS5zN9ffzhbNomXeMmX/NDPWNVNYPs4QfnwKfnv47wv64 k2XhtK8ky+UNJslFRMxDdtFMlf0OpLPW4sBZkQ6ZrLSpbZ9n7byghSMa15d+Joyt JTaQ+NnhB3f7hhgTnnUkpQG9ixWfE7qw0Yudns2Roqvr2sEzFazDl55CkqSX3FHA HAExCBzLJv9ggc5cqNtQkym7sJuq7MsTFsk2iljPJXUxBBHp1xA= =sItP -----END PGP SIGNATURE----- Merge tag 'omap-for-v6.12/soc-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/arm ARM: OMAP1/2: misc SoC updates for v6.12 * tag 'omap-for-v6.12/soc-signed' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap: ARM: OMAP1: Remove unused declarations in arch/arm/mach-omap1/pm.h ARM: omap2: Switch to use kmemdup_array() ARM: omap1: Remove unused struct 'dma_link_info' Link: https://lore.kernel.org/r/7h8qw7arhe.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Dhananjay Ugwekar
|
8d72eba1cf |
perf/x86/rapl: Fix the energy-pkg event for AMD CPUs
After commit:
|
||
Toke Høiland-Jørgensen
|
546ea84d07 |
sched: sch_cake: fix bulk flow accounting logic for host fairness
In sch_cake, we keep track of the count of active bulk flows per host,
when running in dst/src host fairness mode, which is used as the
round-robin weight when iterating through flows. The count of active
bulk flows is updated whenever a flow changes state.
This has a peculiar interaction with the hash collision handling: when a
hash collision occurs (after the set-associative hashing), the state of
the hash bucket is simply updated to match the new packet that collided,
and if host fairness is enabled, that also means assigning new per-host
state to the flow. For this reason, the bulk flow counters of the
host(s) assigned to the flow are decremented, before new state is
assigned (and the counters, which may not belong to the same host
anymore, are incremented again).
Back when this code was introduced, the host fairness mode was always
enabled, so the decrement was unconditional. When the configuration
flags were introduced the *increment* was made conditional, but
the *decrement* was not. Which of course can lead to a spurious
decrement (and associated wrap-around to U16_MAX).
AFAICT, when host fairness is disabled, the decrement and wrap-around
happens as soon as a hash collision occurs (which is not that common in
itself, due to the set-associative hashing). However, in most cases this
is harmless, as the value is only used when host fairness mode is
enabled. So in order to trigger an array overflow, sch_cake has to first
be configured with host fairness disabled, and while running in this
mode, a hash collision has to occur to cause the overflow. Then, the
qdisc has to be reconfigured to enable host fairness, which leads to the
array out-of-bounds because the wrapped-around value is retained and
used as an array index. It seems that syzbot managed to trigger this,
which is quite impressive in its own right.
This patch fixes the issue by introducing the same conditional check on
decrement as is used on increment.
The original bug predates the upstreaming of cake, but the commit listed
in the Fixes tag touched that code, meaning that this patch won't apply
before that.
Fixes:
|
||
Kienan Stewart
|
33d8525dc1 |
fs/pipe: Correct imprecise wording in comment
The comment inaccurately describes what pipefs is - that is, a file system. Signed-off-by: Kienan Stewart <kstewart@efficios.com> Link: https://lore.kernel.org/r/20240904-pipe-correct_imprecise_wording-v1-1-2b07843472c2@efficios.com Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
Christian Brauner
|
7063c229a8 |
Merge patch series "fhandle: expose u64 mount id to name_to_handle_at(2)"
Aleksa Sarai <cyphar@cyphar.com> says:
Now that we provide a unique 64-bit mount ID interface in statx(2), we
can now provide a race-free way for name_to_handle_at(2) to provide a
file handle and corresponding mount without needing to worry about
racing with /proc/mountinfo parsing or having to open a file just to do
statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and don't
care about an extra statx(2) call, users that pass full paths into
name_to_handle_at(2) need to know which mount the file handle comes from
(to make sure they don't try to open_by_handle_at a file handle from a
different filesystem) and switching to AT_EMPTY_PATH would require
allocating a file for every name_to_handle_at(2) call, turning
err = name_to_handle_at(-EBADF, "/foo/bar/baz", &handle, &mntid,
AT_HANDLE_MNT_ID_UNIQUE);
into
int fd = openat(-EBADF, "/foo/bar/baz", O_PATH | O_CLOEXEC);
err1 = name_to_handle_at(fd, "", &handle, &unused_mntid, AT_EMPTY_PATH);
err2 = statx(fd, "", AT_EMPTY_PATH, STATX_MNT_ID_UNIQUE, &statxbuf);
mntid = statxbuf.stx_mnt_id;
close(fd);
Also, this series adds a patch to clarify how AT_* flag allocation
should work going forwards.
* patches from https://lore.kernel.org/r/20240828-exportfs-u64-mount-id-v3-0-10c2c4c16708@cyphar.com:
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
Link: https://lore.kernel.org/r/20240828-exportfs-u64-mount-id-v3-0-10c2c4c16708@cyphar.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
Aleksa Sarai
|
4356d575ef |
fhandle: expose u64 mount id to name_to_handle_at(2)
Now that we provide a unique 64-bit mount ID interface in statx(2), we
can now provide a race-free way for name_to_handle_at(2) to provide a
file handle and corresponding mount without needing to worry about
racing with /proc/mountinfo parsing or having to open a file just to do
statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and don't
care about an extra statx(2) call, users that pass full paths into
name_to_handle_at(2) need to know which mount the file handle comes from
(to make sure they don't try to open_by_handle_at a file handle from a
different filesystem) and switching to AT_EMPTY_PATH would require
allocating a file for every name_to_handle_at(2) call, turning
err = name_to_handle_at(-EBADF, "/foo/bar/baz", &handle, &mntid,
AT_HANDLE_MNT_ID_UNIQUE);
into
int fd = openat(-EBADF, "/foo/bar/baz", O_PATH | O_CLOEXEC);
err1 = name_to_handle_at(fd, "", &handle, &unused_mntid, AT_EMPTY_PATH);
err2 = statx(fd, "", AT_EMPTY_PATH, STATX_MNT_ID_UNIQUE, &statxbuf);
mntid = statxbuf.stx_mnt_id;
close(fd);
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20240828-exportfs-u64-mount-id-v3-2-10c2c4c16708@cyphar.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
|
Aleksa Sarai
|
b4fef22c2f |
uapi: explain how per-syscall AT_* flags should be allocated
Unfortunately, the way we have gone about adding new AT_* flags has
been a little messy. In the beginning, all of the AT_* flags had generic
meanings and so it made sense to share the flag bits indiscriminately.
However, we inevitably ran into syscalls that needed their own
syscall-specific flags. Due to the lack of a planned out policy, we
ended up with the following situations:
* Existing syscalls adding new features tended to use new AT_* bits,
with some effort taken to try to re-use bits for flags that were so
obviously syscall specific that they only make sense for a single
syscall (such as the AT_EACCESS/AT_REMOVEDIR/AT_HANDLE_FID triplet).
Given the constraints of bitflags, this works well in practice, but
ideally (to avoid future confusion) we would plan ahead and define a
set of "per-syscall bits" ahead of time so that when allocating new
bits we don't end up with a complete mish-mash of which bits are
supposed to be per-syscall and which aren't.
* New syscalls dealt with this in several ways:
- Some syscalls (like renameat2(2), move_mount(2), fsopen(2), and
fspick(2)) created their separate own flag spaces that have no
overlap with the AT_* flags. Most of these ended up allocating
their bits sequentually.
In the case of move_mount(2) and fspick(2), several flags have
identical meanings to AT_* flags but were allocated in their own
flag space.
This makes sense for syscalls that will never share AT_* flags, but
for some syscalls this leads to duplication with AT_* flags in a
way that could cause confusion (if renameat2(2) grew a
RENAME_EMPTY_PATH it seems likely that users could mistake it for
AT_EMPTY_PATH since it is an *at(2) syscall).
- Some syscalls unfortunately ended up both creating their own flag
space while also using bits from other flag spaces. The most
obvious example is open_tree(2), where the standard usage ends up
using flags from *THREE* separate flag spaces:
open_tree(AT_FDCWD, "/foo", OPEN_TREE_CLONE|O_CLOEXEC|AT_RECURSIVE);
(Note that O_CLOEXEC is also platform-specific, so several future
OPEN_TREE_* bits are also made unusable in one fell swoop.)
It's not entirely clear to me what the "right" choice is for new
syscalls. Just saying that all future VFS syscalls should use AT_* flags
doesn't seem practical. openat2(2) has RESOLVE_* flags (many of which
don't make much sense to burn generic AT_* flags for) and move_mount(2)
has separate AT_*-like flags for both the source and target so separate
flags are needed anyway (though it seems possible that renameat2(2)
could grow *_EMPTY_PATH flags at some point, and it's a bit of a shame
they can't be reused).
But at least for syscalls that _do_ choose to use AT_* flags, we should
explicitly state the policy that 0x2ff is currently intended for
per-syscall flags and that new flags should err on the side of
overlapping with existing flag bits (so we can extend the scope of
generic flags in the future if necessary).
And add AT_* aliases for the RENAME_* flags to further cement that
renameat2(2) is an *at(2) flag, just with its own per-syscall flags.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20240828-exportfs-u64-mount-id-v3-1-10c2c4c16708@cyphar.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
Marek Vasut
|
7d6b8316ba |
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
By default the SGTL5000 derives bit and frame clock from MCLK, which does not produce particularly accurate results. The SGTL5000 PLL does improve the accuracy, but also increases power consumption. Using the SoC SAI interface as bit and frame clock source results in the best accuracy without the power consumption increase downside. Switch the bit and frame clock direction from SAI to SGTL5000, reduce mclk-fs to match. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> |
||
|
Marek Vasut
|
5afb9b98a7 |
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
Switch the bitclock-master and frame-master properties from phandle to flag on STM32MP15xx DHCOM PDK2. There is no real reason to use phandle in this system DT, since the phandle points to the endpoint node which contains the property itself. Simplify the DT. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> |
||
|
Marek Vasut
|
2ac59e0957 |
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
Sort properties alphabetically in audio endpoints of STM32MP15xx DHCOM PDK2 DT. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> |
||
David Jander
|
8267753c89 |
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
Introduce device tree support for the MECIO1 and MECT1S board variants. MECIO1 is an I/O and motor control board used in blood sample analysis machines. MECT1S is a 1000Base-T1 switch for internal machine networks of blood sample analysis machines. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> |
||
Oleksij Rempel
|
eb2247f142 |
dt-bindings: arm: stm32: Add compatible strings for Protonic boards
Add compatible strings for Protonic MECIO1r0 and MECT1S boards to the STM32MP151-based boards section and Protonic MECIO1r1 board to the STM32MP153-based boards section. MECIO1 is an I/O and motor control board used in blood sample analysis machines. MECT1S is a 1000Base-T1 switch for internal machine networks of blood sample analysis machines. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> |