Current code handles the CPM1 version of TSA. Connecting and
disconnecting the SCC to/from the TSA consists in handling SICR register
which is CPM1 specific. The connection and disconnection operation in
the QUICC Engine (QE) version are slightly different.
In order to prepare the support for the QE version, clearly identify
SICR register as specific to CPM1 and isolate its handling done in
connect and disconnect functions.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-13-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of TSA. Setting up TSA consists in
handling SIMODE and SIGMR registers. These registers are CPM1 specific.
Setting up the QUICC Engine (QE) version of TSA is slightly different.
In order to prepare the support for QE version, clearly identify these
registers as CPM1 compatible and isolate their handling in a CPM1
specific function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-12-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Current code handles the CPM1 version of TSA. Compared against QUICC
Engine (QE) version of TSA, CPM1 SIRAM entries are slightly different.
In order to prepare the support for the QE version, clearly identify
these entries and functions handling them as CPM1 compatible.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-11-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Loops handling the tdm array use hardcoded size and the initialization
part uses hardcoded indexes to initialize the array.
Use ARRAY_SIZE() to avoid the hardcoded size and initialize the array
using a loop.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-10-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Add support for the time slot assigner (TSA) available in some
PowerQUICC SoC that uses a QUICC Engine (QE) block such as MPC8321.
This QE TSA is similar to the CPM TSA except that it uses UCCs (Unified
Communication Controllers) instead of SCCs (Serial Communication
Controllers). Also, compared against the CPM TSA, this QE TSA can handle
up to 4 TDMs instead of 2 and allows to configure the logic level of
sync signals.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-8-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
checkpatch.pl signals the following improvement for tsa.c
CHECK: Prefer using the BIT macro
Follow its suggestion and convert the code to BIT() and related macros.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-5-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The tsa_write8() parameter is an u32 value. This is not consistent with
the function itself. Indeed, tsa_write8() writes an 8bits value.
Be consistent and use an u8 parameter value.
Fixes: 1d4ba0b81c ("soc: fsl: cpm1: Add support for TSA")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-4-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The TRNSYNC feature is enabled whatever the number of time-slots used.
The feature is needed only when more than one time-slot is used.
Improve the driver enabling TRNSYNC only when it is needed.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-3-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The TRNSYNC feature is available (and enabled) only in transparent mode.
Since commit 7cc9bda9c1 ("soc: fsl: cpm1: qmc: Handle timeslot entries
at channel start() and stop()") TRNSYNC register is updated in
transparent and hdlc mode. In hdlc mode, the address of the TRNSYNC
register is used by the QMC for other internal purpose. Even if no weird
results were observed in hdlc mode, touching this register in this mode
is wrong.
Update TRNSYNC only in transparent mode.
Fixes: 7cc9bda9c1 ("soc: fsl: cpm1: qmc: Handle timeslot entries at channel start() and stop()")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-2-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Since commit 946fa0dbf2 ("mm/slub: extend redzone check to extra
allocated kmalloc space than requested"), setting orig_size treats
the wasted space (object_size - orig_size) as a redzone. However with
init_on_free=1 we clear the full object->size, including the redzone.
Additionally we clear the object metadata, including the stored orig_size,
making it zero, which makes check_object() treat the whole object as a
redzone.
These issues lead to the following BUG report with "slub_debug=FUZ
init_on_free=1":
[ 0.000000] =============================================================================
[ 0.000000] BUG kmalloc-8 (Not tainted): kmalloc Redzone overwritten
[ 0.000000] -----------------------------------------------------------------------------
[ 0.000000]
[ 0.000000] 0xffff000010032858-0xffff00001003285f @offset=2136. First byte 0x0 instead of 0xcc
[ 0.000000] FIX kmalloc-8: Restoring kmalloc Redzone 0xffff000010032858-0xffff00001003285f=0xcc
[ 0.000000] Slab 0xfffffdffc0400c80 objects=36 used=23 fp=0xffff000010032a18 flags=0x3fffe0000000200(workingset|node=0|zone=0|lastcpupid=0x1ffff)
[ 0.000000] Object 0xffff000010032858 @offset=2136 fp=0xffff0000100328c8
[ 0.000000]
[ 0.000000] Redzone ffff000010032850: cc cc cc cc cc cc cc cc ........
[ 0.000000] Object ffff000010032858: cc cc cc cc cc cc cc cc ........
[ 0.000000] Redzone ffff000010032860: cc cc cc cc cc cc cc cc ........
[ 0.000000] Padding ffff0000100328b4: 00 00 00 00 00 00 00 00 00 00 00 00 ............
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.11.0-rc3-next-20240814-00004-g61844c55c3f4 #144
[ 0.000000] Hardware name: NXP i.MX95 19X19 board (DT)
[ 0.000000] Call trace:
[ 0.000000] dump_backtrace+0x90/0xe8
[ 0.000000] show_stack+0x18/0x24
[ 0.000000] dump_stack_lvl+0x74/0x8c
[ 0.000000] dump_stack+0x18/0x24
[ 0.000000] print_trailer+0x150/0x218
[ 0.000000] check_object+0xe4/0x454
[ 0.000000] free_to_partial_list+0x2f8/0x5ec
To address the issue, use orig_size to clear the used area. And restore
the value of orig_size after clear the remaining area.
When CONFIG_SLUB_DEBUG not defined, (get_orig_size()' directly returns
s->object_size. So when using memset to init the area, the size can simply
be orig_size, as orig_size returns object_size when CONFIG_SLUB_DEBUG not
enabled. And orig_size can never be bigger than object_size.
Fixes: 946fa0dbf2 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested")
Cc: <stable@vger.kernel.org>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Currently there is no way to apply quirk on device only if certain panel
model is installed. This patch implements such mechanism by adding new
quirk type intel_dpcd_quirk which contains also sink_oui and sink_device_id
fields and using also them to figure out if applying quirk is needed.
New intel_init_dpcd_quirks is added and called after drm_dp_read_desc with
proper sink device identity read from dpcdc.
v3:
- !mem_is_zero fixed to mem_is_zero
v2:
- instead of using struct intel_quirk add new struct intel_dpcd_quirk
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902064241.1020965-2-jouni.hogander@intel.com
COW writes remove the amount overwritten either directly for delalloc
reservations, or in earlier deferred transactions than adding the new
amount back in the bmap map transaction. This means st_blocks on an
inode where all data is overwritten using the COW path can temporarily
show a 0 st_blocks. This can easily be reproduced with the pending
zoned device support where all writes use this path and trips the
check in generic/615, but could also happen on a reflink file without
that.
Fix this by temporarily add the pending blocks to be mapped to
i_delayed_blks while the item is queued.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_reclaim_inodes_count iterates over all AGs to sum up the reclaimable
inodes counts. There is no point in grabbing a reference to the them or
unlock the RCU critical section for each iteration, so switch to the
more efficient xas_for_each_marked iterator.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Convert the perag lookup from the legacy radix tree to the xarray,
which allows for much nicer iteration and bulk lookup semantics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Pass the old perag structure to the tagged loop helpers so that they can
grab the old agno before releasing the reference. This removes the need
to separately track the agno and the iterator macro, and thus also
obsoletes the for_each_perag_tag syntactic sugar.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The tagged perag helpers are only used in xfs_icache.c in the kernel code
and not at all in xfsprogs. Move them to xfs_icache.c in preparation for
switching to an xarray, for which I have no plan to implement the tagged
lookup functions for userspace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Using the kfree_rcu_mightsleep is simpler and removes the need for a
rcu_head in the perag structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD().
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
./fs/xfs/libxfs/xfs_defer.c: xfs_trans_priv.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9491
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
We checked that "pip" is non-NULL at the start of the if else statement
so there is no need to check again here. Delete the check.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Use the set and clear mp state helpers instead of open-coding.
It is noted that in some instances calls to atomic operation set_bit() and
clear_bit() are being replaced with test_and_set_bit() and
test_and_clear_bit(), respectively, as there is no specific helpers for
set_bit() and clear_bit() only. However should be ok, as we are just
ignoring the returned value from those "test" variants.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The XFS XFS_DIFLAG_APPEND maps to the VFS S_APPEND flag, which forbids
writes that don't append at the current EOF.
But the commit originally adding XFS_DIFLAG_APPEND support (commit
a23321e766d in xfs xfs-import repository) also checked it to skip
releasing speculative preallocations, which doesn't make any sense.
Another commit (dd9f438e32 in the xfs-import repository) later extended
that flag to also report these speculation preallocations which should
not exist in getbmap.
Remove these checks as nothing XFS_DIFLAG_APPEND implies that
preallocations beyond EOF should exist, but explicitly check for
XFS_DIFLAG_APPEND in xfs_file_release to bypass the algorithm that
discard preallocations on the first close as append only files aren't
expected to be written to only once.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_can_free_eofblocks just cares if there is an extent beyond EOF.
Replace the call to xfs_bmapi_read with a xfs_iext_lookup_extent
as we've already checked that extents are read in earlier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
If the XFS_EOFBLOCKS_RELEASED flag is set, we are not going to free the
eofblocks, so don't bother locking the inode or performing the checks in
xfs_can_free_eofblocks. Also switch to a test_and_set operation once
the iolock has been acquire so that only the caller that sets it actually
frees the post-EOF blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Certain workloads fragment files on XFS very badly, such as a software
package that creates a number of threads, each of which repeatedly run
the sequence: open a file, perform a synchronous write, and close the
file, which defeats the speculative preallocation mechanism. We work
around this problem by only deleting posteof blocks the /first/ time a
file is closed to preserve the behavior that unpacking a tarball lays
out files one after the other with no gaps.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
[hch: rebased, updated comment, renamed the flag]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
When we have a workload that does open/read/close in parallel with other
allocation, the file becomes rapidly fragmented. This is due to close()
calling xfs_file_release() and removing the speculative preallocation
beyond EOF.
Add a check for a writable context to xfs_file_release to skip the
post-EOF block freeing (an the similarly pointless flushing on truncate
down).
Before:
Test 1: sync write fragmentation counts
/mnt/scratch/file.0: 919
/mnt/scratch/file.1: 916
/mnt/scratch/file.2: 919
/mnt/scratch/file.3: 920
/mnt/scratch/file.4: 920
/mnt/scratch/file.5: 921
/mnt/scratch/file.6: 916
/mnt/scratch/file.7: 918
After:
Test 1: sync write fragmentation counts
/mnt/scratch/file.0: 24
/mnt/scratch/file.1: 24
/mnt/scratch/file.2: 11
/mnt/scratch/file.3: 24
/mnt/scratch/file.4: 3
/mnt/scratch/file.5: 24
/mnt/scratch/file.6: 24
/mnt/scratch/file.7: 23
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[darrick: wordsmithing, fix commit message]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
[hch: ported to the new ->release code structure]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
There is no point in trying to free post-EOF blocks when the file system
is shutdown, as it will just error out ASAP. Instead return instantly
when xfs_file_release is called on a shut down file system.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
While ->release returns int, the only caller ignores the return value.
As we're only doing cleanup work there isn't much of a point in
return a value to start with, so just document the situation instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Currently f_op->release is split in not very obvious ways. Fix that by
folding xfs_release into xfs_file_release.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_release is only called from xfs_file_release, which is wired up as
the f_op->release handler for regular files only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
This series prepares the btree code to support realtime reverse mapping btrees
by refactoring xfs_ifork_realloc to be fed a per-btree ops structure so that it
can handle multiple types of inode-rooted btrees. It moves on to refactoring
the btree code to use the new realloc routines.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZtX/ZAAKCRBKO3ySh0YR
pujVAP9P9nSIpb8sORXYT76oQ8qrnR59XatVpEwenHeDlhWtHAEAmUscRhUvUD0B
H0TYgDGjfSq002cHpRUgMOBkXHmZNAY=
=h4X+
-----END PGP SIGNATURE-----
Merge tag 'btree-cleanups-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.12-mergeA
xfs: cleanups for inode rooted btree code [v4.2 8/8]
This series prepares the btree code to support realtime reverse mapping btrees
by refactoring xfs_ifork_realloc to be fed a per-btree ops structure so that it
can handle multiple types of inode-rooted btrees. It moves on to refactoring
the btree code to use the new realloc routines.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'btree-cleanups-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: standardize the btree maxrecs function parameters
xfs: replace shouty XFS_BM{BT,DR} macros
Various bug fixes for 6.12.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZtX/ZAAKCRBKO3ySh0YR
pqwLAQDCuI0wSdV4NQPlaIyQ9qKmxFa+7fDkouSE2ydRI2AchwEAj5yh64/w6N3g
CGZXYvpypKBULD7/ddzaPFQEHGb8/wo=
=S9Cu
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.12-mergeA
xfs: various bug fixes for 6.12 [7/8]
Various bug fixes for 6.12.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'xfs-fixes-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: fix a sloppy memory handling bug in xfs_iroot_realloc
xfs: fix FITRIM reporting again
xfs: fix C++ compilation errors in xfs_fs.h
Refactor the quota file loading code in preparation for adding metadata
directory trees. Did you know that quotarm works even when quota isn't active?
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZtX/ZAAKCRBKO3ySh0YR
pjsFAQCXpEXOlE1kprvBQyM4HOx2NJyF9juWQGtWENjkbPrO+wEA9ObDmXFFS+F7
/jGL56qAs05MV43FoQj/HlULXjlF8gc=
=Cg82
-----END PGP SIGNATURE-----
Merge tag 'quota-cleanups-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.12-mergeA
xfs: cleanups for quota mount [v4.2 6/8]
Refactor the quota file loading code in preparation for adding metadata
directory trees. Did you know that quotarm works even when quota isn't active?
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'quota-cleanups-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: refactor loading quota inodes in the regular case
This third series cleans up the realtime allocator code so that it'll be
somewhat less difficult to figure out what on earth it's doing. We also
rearrange the fsmap code a bit.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZtX/YwAKCRBKO3ySh0YR
pnxRAQDXsK7oTlu4G4jmDAPfDvbYqQlI9S3IPVA1T/V8LTAqCQEA22zjHGmUfSZT
08aP+fAQ6FmQIP92vYqwEzew02jIzAo=
=/a70
-----END PGP SIGNATURE-----
Merge tag 'rtalloc-cleanups-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.12-mergeA
xfs: cleanups for the realtime allocator [v4.2 5/8]
This third series cleans up the realtime allocator code so that it'll be
somewhat less difficult to figure out what on earth it's doing. We also
rearrange the fsmap code a bit.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'rtalloc-cleanups-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: move xfs_ioc_getfsmap out of xfs_ioctl.c
xfs: rearrange xfs_fsmap.c a little bit
xfs: replace m_rsumsize with m_rsumblocks
xfs: remove xfs_{rtbitmap,rtsummary}_wordcount
xfs: add xchk_setup_nothing and xchk_nothing helpers
xfs: make the rtalloc start hint a xfs_rtblock_t
xfs: factor out a xfs_rtallocate_align helper
xfs: rework the rtalloc fallback handling
xfs: factor out a xfs_rtallocate helper
xfs: clean up the ISVALID macro in xfs_bmap_adjacent
While I was reviewing how to integrate realtime allocation groups with
the rt allocator, I noticed several bugs in the existing allocation code
with regards to calculating the maximum range of rtx to scan for free
space. This series fixes those range bugs and cleans up a few things
too.
I also added a few cleanups from Christoph.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZtX/YwAKCRBKO3ySh0YR
pmXZAQD5t79H7c1Za2WkLlOMLOdBNKZU5Rfbr3ZFXZDJ22pWewEAoFa3+8vH5o6i
P3c9yP/H4+FfA4ZgMGIg/eS/2NvX1QQ=
=n6pm
-----END PGP SIGNATURE-----
Merge tag 'rtalloc-fixes-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.12-mergeA
xfs: fixes for the realtime allocator [v4.2 4/8]
While I was reviewing how to integrate realtime allocation groups with
the rt allocator, I noticed several bugs in the existing allocation code
with regards to calculating the maximum range of rtx to scan for free
space. This series fixes those range bugs and cleans up a few things
too.
I also added a few cleanups from Christoph.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'rtalloc-fixes-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: simplify xfs_rtalloc_query_range
xfs: remove xfs_rtb_to_rtxrem
xfs: fix broken variable-sized allocation detection in xfs_rtallocate_extent_block
xfs: reduce excessive clamping of maxlen in xfs_rtallocate_extent_near
xfs: clean up xfs_rtallocate_extent_exact a bit
xfs: refactor aligning bestlen to prod
xfs: don't scan off the end of the rt volume in xfs_rtallocate_extent_block
xfs: don't return too-short extents from xfs_rtallocate_extent_block
xfs: ensure rtx mask/shift are correct after growfs
xfs: use the recalculated transaction reservation in xfs_growfs_rt_bmblock
Here are some cleanups and reorganization of the realtime bitmap code to share
more of that code between userspace and the kernel.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZtX/YwAKCRBKO3ySh0YR
plcbAP9AlHyTFF8Ba3ELFh9XD3CIAqi7i5mKVn4p8klXJI5E1wEAw0g315kuIJWz
v+6qMd7fVCRIhuEwni6Pw/obkclMogA=
=+Wof
-----END PGP SIGNATURE-----
Merge tag 'rtbitmap-cleanups-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.12-mergeA
xfs: clean up the rtbitmap code [v4.2 3/8]
Here are some cleanups and reorganization of the realtime bitmap code to share
more of that code between userspace and the kernel.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'rtbitmap-cleanups-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: push transaction join out of xfs_rtbitmap_lock and xfs_rtgroup_lock
xfs: factor out rtbitmap/summary initialization helpers
xfs: factor out a xfs_last_rt_bmblock helper
xfs: factor out a xfs_growfs_rt_bmblock helper
xfs: push the calls to xfs_rtallocate_range out to xfs_bmap_rtalloc
xfs: cleanup the calling convention for xfs_rtpick_extent
xfs: add bounds checking to xfs_rt{bitmap,summary}_read_buf
xfs: assert a valid limit in xfs_rtfind_forw
xfs: remove the limit argument to xfs_rtfind_back
xfs: make the RT rsum_cache mandatory
xfs: factor out a xfs_validate_rt_geometry helper
xfs: remove xfs_validate_rtextents
Before we start adding code for metadata directory trees, let's clean up
some warts in the realtime bitmap code and the inode allocator code.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZtX/YwAKCRBKO3ySh0YR
pmJvAQCN9+wcAzTguqRdLUaQSFqfHWPCRHFXEab3D+q4FJ0/mgEA+383aG1WaA7A
g8EFHRGyz+sDoSWYA2rC/Qe+c9JUtQU=
=sGcd
-----END PGP SIGNATURE-----
Merge tag 'metadir-cleanups-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.12-mergeA
xfs: cleanups before adding metadata directories [v4.2 2/8]
Before we start adding code for metadata directory trees, let's clean up
some warts in the realtime bitmap code and the inode allocator code.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'metadir-cleanups-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: pass the icreate args object to xfs_dialloc
xfs: match on the global RT inode numbers in xfs_is_metadata_inode
xfs: validate inumber in xfs_iget
This series creates XFS_IOC_START_COMMIT and XFS_IOC_COMMIT_RANGE ioctls
to perform the exchange only if the target file has not been changed
since a given sampling point.
This new functionality uses the mechanism underlying EXCHANGE_RANGE to
stage and commit file updates such that reader programs will see either
the old contents or the new contents in their entirety, with no chance
of torn writes. A successful call completion guarantees that the new
contents will be seen even if the system fails. The pair of ioctls
allows userspace to perform what amounts to a compare and exchange
operation on entire file contents.
Note that there are ongoing arguments in the community about how best to
implement some sort of file data write counter that nfsd could also use
to signal invalidations to clients. Until such a thing is implemented,
this patch will rely on ctime/mtime updates.
Here are the proposed manual pages:
IOCTL-XFS-COMMIT-RANGE(2) System Calls ManualIOCTL-XFS-COMMIT-RANGE(2)
NAME
ioctl_xfs_start_commit - prepare to exchange the contents of
two files ioctl_xfs_commit_range - conditionally exchange the
contents of parts of two files
SYNOPSIS
#include <sys/ioctl.h>
#include <xfs/xfs_fs.h>
int ioctl(int file2_fd, XFS_IOC_START_COMMIT, struct xfs_com‐
mit_range *arg);
int ioctl(int file2_fd, XFS_IOC_COMMIT_RANGE, struct xfs_com‐
mit_range *arg);
DESCRIPTION
Given a range of bytes in a first file file1_fd and a second
range of bytes in a second file file2_fd, this ioctl(2) ex‐
changes the contents of the two ranges if file2_fd passes cer‐
tain freshness criteria.
Before exchanging the contents, the program must call the
XFS_IOC_START_COMMIT ioctl to sample freshness data for
file2_fd. If the sampled metadata does not match the file
metadata at commit time, XFS_IOC_COMMIT_RANGE will return
EBUSY.
Exchanges are atomic with regards to concurrent file opera‐
tions. Implementations must guarantee that readers see either
the old contents or the new contents in their entirety, even if
the system fails.
The system call parameters are conveyed in structures of the
following form:
struct xfs_commit_range {
__s32 file1_fd;
__u32 pad;
__u64 file1_offset;
__u64 file2_offset;
__u64 length;
__u64 flags;
__u64 file2_freshness[5];
};
The field pad must be zero.
The fields file1_fd, file1_offset, and length define the first
range of bytes to be exchanged.
The fields file2_fd, file2_offset, and length define the second
range of bytes to be exchanged.
The field file2_freshness is an opaque field whose contents are
determined by the kernel. These file attributes are used to
confirm that file2_fd has not changed by another thread since
the current thread began staging its own update.
Both files must be from the same filesystem mount. If the two
file descriptors represent the same file, the byte ranges must
not overlap. Most disk-based filesystems require that the
starts of both ranges must be aligned to the file block size.
If this is the case, the ends of the ranges must also be so
aligned unless the XFS_EXCHANGE_RANGE_TO_EOF flag is set.
The field flags control the behavior of the exchange operation.
XFS_EXCHANGE_RANGE_TO_EOF
Ignore the length parameter. All bytes in file1_fd
from file1_offset to EOF are moved to file2_fd, and
file2's size is set to (file2_offset+(file1_length-
file1_offset)). Meanwhile, all bytes in file2 from
file2_offset to EOF are moved to file1 and file1's
size is set to (file1_offset+(file2_length-
file2_offset)).
XFS_EXCHANGE_RANGE_DSYNC
Ensure that all modified in-core data in both file
ranges and all metadata updates pertaining to the
exchange operation are flushed to persistent storage
before the call returns. Opening either file de‐
scriptor with O_SYNC or O_DSYNC will have the same
effect.
XFS_EXCHANGE_RANGE_FILE1_WRITTEN
Only exchange sub-ranges of file1_fd that are known
to contain data written by application software.
Each sub-range may be expanded (both upwards and
downwards) to align with the file allocation unit.
For files on the data device, this is one filesystem
block. For files on the realtime device, this is
the realtime extent size. This facility can be used
to implement fast atomic scatter-gather writes of
any complexity for software-defined storage targets
if all writes are aligned to the file allocation
unit.
XFS_EXCHANGE_RANGE_DRY_RUN
Check the parameters and the feasibility of the op‐
eration, but do not change anything.
RETURN VALUE
On error, -1 is returned, and errno is set to indicate the er‐
ror.
ERRORS
Error codes can be one of, but are not limited to, the follow‐
ing:
EBADF file1_fd is not open for reading and writing or is open
for append-only writes; or file2_fd is not open for
reading and writing or is open for append-only writes.
EBUSY The file2 inode number and timestamps supplied do not
match file2_fd.
EINVAL The parameters are not correct for these files. This
error can also appear if either file descriptor repre‐
sents a device, FIFO, or socket. Disk filesystems gen‐
erally require the offset and length arguments to be
aligned to the fundamental block sizes of both files.
EIO An I/O error occurred.
EISDIR One of the files is a directory.
ENOMEM The kernel was unable to allocate sufficient memory to
perform the operation.
ENOSPC There is not enough free space in the filesystem ex‐
change the contents safely.
EOPNOTSUPP
The filesystem does not support exchanging bytes between
the two files.
EPERM file1_fd or file2_fd are immutable.
ETXTBSY
One of the files is a swap file.
EUCLEAN
The filesystem is corrupt.
EXDEV file1_fd and file2_fd are not on the same mounted
filesystem.
CONFORMING TO
This API is XFS-specific.
USE CASES
Several use cases are imagined for this system call. Coordina‐
tion between multiple threads is performed by the kernel.
The first is a filesystem defragmenter, which copies the con‐
tents of a file into another file and wishes to exchange the
space mappings of the two files, provided that the original
file has not changed.
An example program might look like this:
int fd = open("/some/file", O_RDWR);
int temp_fd = open("/some", O_TMPFILE | O_RDWR);
struct stat sb;
struct xfs_commit_range args = {
.flags = XFS_EXCHANGE_RANGE_TO_EOF,
};
/* gather file2's freshness information */
ioctl(fd, XFS_IOC_START_COMMIT, &args);
fstat(fd, &sb);
/* make a fresh copy of the file with terrible alignment to avoid reflink */
clone_file_range(fd, NULL, temp_fd, NULL, 1, 0);
clone_file_range(fd, NULL, temp_fd, NULL, sb.st_size - 1, 0);
/* commit the entire update */
args.file1_fd = temp_fd;
ret = ioctl(fd, XFS_IOC_COMMIT_RANGE, &args);
if (ret && errno == EBUSY)
printf("file changed while defrag was underway
");
The second is a data storage program that wants to commit non-
contiguous updates to a file atomically. This program cannot
coordinate updates to the file and therefore relies on the ker‐
nel to reject the COMMIT_RANGE command if the file has been up‐
dated by someone else. This can be done by creating a tempo‐
rary file, calling FICLONE(2) to share the contents, and stag‐
ing the updates into the temporary file. The FULL_FILES flag
is recommended for this purpose. The temporary file can be
deleted or punched out afterwards.
An example program might look like this:
int fd = open("/some/file", O_RDWR);
int temp_fd = open("/some", O_TMPFILE | O_RDWR);
struct xfs_commit_range args = {
.flags = XFS_EXCHANGE_RANGE_TO_EOF,
};
/* gather file2's freshness information */
ioctl(fd, XFS_IOC_START_COMMIT, &args);
ioctl(temp_fd, FICLONE, fd);
/* append 1MB of records */
lseek(temp_fd, 0, SEEK_END);
write(temp_fd, data1, 1000000);
/* update record index */
pwrite(temp_fd, data1, 600, 98765);
pwrite(temp_fd, data2, 320, 54321);
pwrite(temp_fd, data2, 15, 0);
/* commit the entire update */
args.file1_fd = temp_fd;
ret = ioctl(fd, XFS_IOC_COMMIT_RANGE, &args);
if (ret && errno == EBUSY)
printf("file changed before commit; will roll back
");
NOTES
Some filesystems may limit the amount of data or the number of
extents that can be exchanged in a single call.
SEE ALSO
ioctl(2)
XFS 2024-02-18 IOCTL-XFS-COMMIT-RANGE(2)
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZtX/YwAKCRBKO3ySh0YR
pmwCAP94qdxT7T1vmwVGgT0HaGZRmb5ywqmAhuea7bftpRmyhgD/Ye8i/+fHfJX5
xUuuaMKN66ZMOC5LnZGPEf0lgC9LXwg=
=/kPi
-----END PGP SIGNATURE-----
Merge tag 'atomic-file-commits-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.12-mergeA
xfs: atomic file content commits [v31.1 1/8]
This series creates XFS_IOC_START_COMMIT and XFS_IOC_COMMIT_RANGE ioctls
to perform the exchange only if the target file has not been changed
since a given sampling point.
This new functionality uses the mechanism underlying EXCHANGE_RANGE to
stage and commit file updates such that reader programs will see either
the old contents or the new contents in their entirety, with no chance
of torn writes. A successful call completion guarantees that the new
contents will be seen even if the system fails. The pair of ioctls
allows userspace to perform what amounts to a compare and exchange
operation on entire file contents.
Note that there are ongoing arguments in the community about how best to
implement some sort of file data write counter that nfsd could also use
to signal invalidations to clients. Until such a thing is implemented,
this patch will rely on ctime/mtime updates.
Here are the proposed manual pages:
IOCTL-XFS-COMMIT-RANGE(2) System Calls ManualIOCTL-XFS-COMMIT-RANGE(2)
NAME
ioctl_xfs_start_commit - prepare to exchange the contents of
two files ioctl_xfs_commit_range - conditionally exchange the
contents of parts of two files
SYNOPSIS
#include <sys/ioctl.h>
#include <xfs/xfs_fs.h>
int ioctl(int file2_fd, XFS_IOC_START_COMMIT, struct xfs_com‐
mit_range *arg);
int ioctl(int file2_fd, XFS_IOC_COMMIT_RANGE, struct xfs_com‐
mit_range *arg);
DESCRIPTION
Given a range of bytes in a first file file1_fd and a second
range of bytes in a second file file2_fd, this ioctl(2) ex‐
changes the contents of the two ranges if file2_fd passes cer‐
tain freshness criteria.
Before exchanging the contents, the program must call the
XFS_IOC_START_COMMIT ioctl to sample freshness data for
file2_fd. If the sampled metadata does not match the file
metadata at commit time, XFS_IOC_COMMIT_RANGE will return
EBUSY.
Exchanges are atomic with regards to concurrent file opera‐
tions. Implementations must guarantee that readers see either
the old contents or the new contents in their entirety, even if
the system fails.
The system call parameters are conveyed in structures of the
following form:
struct xfs_commit_range {
__s32 file1_fd;
__u32 pad;
__u64 file1_offset;
__u64 file2_offset;
__u64 length;
__u64 flags;
__u64 file2_freshness[5];
};
The field pad must be zero.
The fields file1_fd, file1_offset, and length define the first
range of bytes to be exchanged.
The fields file2_fd, file2_offset, and length define the second
range of bytes to be exchanged.
The field file2_freshness is an opaque field whose contents are
determined by the kernel. These file attributes are used to
confirm that file2_fd has not changed by another thread since
the current thread began staging its own update.
Both files must be from the same filesystem mount. If the two
file descriptors represent the same file, the byte ranges must
not overlap. Most disk-based filesystems require that the
starts of both ranges must be aligned to the file block size.
If this is the case, the ends of the ranges must also be so
aligned unless the XFS_EXCHANGE_RANGE_TO_EOF flag is set.
The field flags control the behavior of the exchange operation.
XFS_EXCHANGE_RANGE_TO_EOF
Ignore the length parameter. All bytes in file1_fd
from file1_offset to EOF are moved to file2_fd, and
file2's size is set to (file2_offset+(file1_length-
file1_offset)). Meanwhile, all bytes in file2 from
file2_offset to EOF are moved to file1 and file1's
size is set to (file1_offset+(file2_length-
file2_offset)).
XFS_EXCHANGE_RANGE_DSYNC
Ensure that all modified in-core data in both file
ranges and all metadata updates pertaining to the
exchange operation are flushed to persistent storage
before the call returns. Opening either file de‐
scriptor with O_SYNC or O_DSYNC will have the same
effect.
XFS_EXCHANGE_RANGE_FILE1_WRITTEN
Only exchange sub-ranges of file1_fd that are known
to contain data written by application software.
Each sub-range may be expanded (both upwards and
downwards) to align with the file allocation unit.
For files on the data device, this is one filesystem
block. For files on the realtime device, this is
the realtime extent size. This facility can be used
to implement fast atomic scatter-gather writes of
any complexity for software-defined storage targets
if all writes are aligned to the file allocation
unit.
XFS_EXCHANGE_RANGE_DRY_RUN
Check the parameters and the feasibility of the op‐
eration, but do not change anything.
RETURN VALUE
On error, -1 is returned, and errno is set to indicate the er‐
ror.
ERRORS
Error codes can be one of, but are not limited to, the follow‐
ing:
EBADF file1_fd is not open for reading and writing or is open
for append-only writes; or file2_fd is not open for
reading and writing or is open for append-only writes.
EBUSY The file2 inode number and timestamps supplied do not
match file2_fd.
EINVAL The parameters are not correct for these files. This
error can also appear if either file descriptor repre‐
sents a device, FIFO, or socket. Disk filesystems gen‐
erally require the offset and length arguments to be
aligned to the fundamental block sizes of both files.
EIO An I/O error occurred.
EISDIR One of the files is a directory.
ENOMEM The kernel was unable to allocate sufficient memory to
perform the operation.
ENOSPC There is not enough free space in the filesystem ex‐
change the contents safely.
EOPNOTSUPP
The filesystem does not support exchanging bytes between
the two files.
EPERM file1_fd or file2_fd are immutable.
ETXTBSY
One of the files is a swap file.
EUCLEAN
The filesystem is corrupt.
EXDEV file1_fd and file2_fd are not on the same mounted
filesystem.
CONFORMING TO
This API is XFS-specific.
USE CASES
Several use cases are imagined for this system call. Coordina‐
tion between multiple threads is performed by the kernel.
The first is a filesystem defragmenter, which copies the con‐
tents of a file into another file and wishes to exchange the
space mappings of the two files, provided that the original
file has not changed.
An example program might look like this:
int fd = open("/some/file", O_RDWR);
int temp_fd = open("/some", O_TMPFILE | O_RDWR);
struct stat sb;
struct xfs_commit_range args = {
.flags = XFS_EXCHANGE_RANGE_TO_EOF,
};
/* gather file2's freshness information */
ioctl(fd, XFS_IOC_START_COMMIT, &args);
fstat(fd, &sb);
/* make a fresh copy of the file with terrible alignment to avoid reflink */
clone_file_range(fd, NULL, temp_fd, NULL, 1, 0);
clone_file_range(fd, NULL, temp_fd, NULL, sb.st_size - 1, 0);
/* commit the entire update */
args.file1_fd = temp_fd;
ret = ioctl(fd, XFS_IOC_COMMIT_RANGE, &args);
if (ret && errno == EBUSY)
printf("file changed while defrag was underway
");
The second is a data storage program that wants to commit non-
contiguous updates to a file atomically. This program cannot
coordinate updates to the file and therefore relies on the ker‐
nel to reject the COMMIT_RANGE command if the file has been up‐
dated by someone else. This can be done by creating a tempo‐
rary file, calling FICLONE(2) to share the contents, and stag‐
ing the updates into the temporary file. The FULL_FILES flag
is recommended for this purpose. The temporary file can be
deleted or punched out afterwards.
An example program might look like this:
int fd = open("/some/file", O_RDWR);
int temp_fd = open("/some", O_TMPFILE | O_RDWR);
struct xfs_commit_range args = {
.flags = XFS_EXCHANGE_RANGE_TO_EOF,
};
/* gather file2's freshness information */
ioctl(fd, XFS_IOC_START_COMMIT, &args);
ioctl(temp_fd, FICLONE, fd);
/* append 1MB of records */
lseek(temp_fd, 0, SEEK_END);
write(temp_fd, data1, 1000000);
/* update record index */
pwrite(temp_fd, data1, 600, 98765);
pwrite(temp_fd, data2, 320, 54321);
pwrite(temp_fd, data2, 15, 0);
/* commit the entire update */
args.file1_fd = temp_fd;
ret = ioctl(fd, XFS_IOC_COMMIT_RANGE, &args);
if (ret && errno == EBUSY)
printf("file changed before commit; will roll back
");
NOTES
Some filesystems may limit the amount of data or the number of
extents that can be exchanged in a single call.
SEE ALSO
ioctl(2)
XFS 2024-02-18 IOCTL-XFS-COMMIT-RANGE(2)
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'atomic-file-commits-6.12_2024-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: introduce new file range commit ioctls
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmbSOo4THG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b3Q7CACNWVZ79TdlnhayDyXaJ9E1j/jDjUdY
oUpce0n8zCceowkrwsa/XqCltmJ9wi/3FaAl4/kAjGu2GoqPReD+P0UkUAxf0pCX
5JllkFJP5JTZyU81N3ykfKWcZJ03KMuSxc2fQpW36auPuy9LlxeNE1sxGvWYcjex
IQvzbmszjwWLvDQ2meszb0MGwW2jD1m+iX2LfqzpBZQx5TFQHA91B4IWPI/VxmJE
78aAB89TYCjE/2FodFH8znKCGcjH61QvmNIkQ530Qca4qeIMBwcFF5YatR77SjaZ
QPYsm+n5VxolJMv1/PD10t1kglqJ9lFIfCa72U1tCIIANugaxqddpMHB
=Uhyk
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.12-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-08-30
The first patch is by Duy Nguyen and document the R-Car V4M support in
the rcar-canfd DT bindings.
Frank Li's patch converts the microchip,mcp251x.txt DT bindings
documentation to yaml.
A patch by Zhang Changzhong update a comment in the j1939 CAN
networking stack.
Stefan Mätje's patch updates the CAN configuration netlink code, so
that the bit timing calculation doesn't work on stale
can_priv::ctrlmode data.
Martin Jocic contributes a patch for the kvaser_pciefd driver to
convert some ifdefs into if (IS_ENABLED()).
The last patch is by Yan Zhen and simplifies the probe() function of
the kvaser USB driver by using dev_err_probe().
* tag 'linux-can-next-for-6.12-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: kvaser_usb: Simplify with dev_err_probe()
can: kvaser_pciefd: Use IS_ENABLED() instead of #ifdef
can: netlink: avoid call to do_set_data_bittiming callback with stale can_priv::ctrlmode
can: j1939: use correct function name in comment
dt-bindings: can: convert microchip,mcp251x.txt to yaml
dt-bindings: can: renesas,rcar-canfd: Document R-Car V4M support
====================
Link: https://patch.msgid.link/20240830214406.1605786-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- qca: If memdump doesn't work, re-enable IBS
- MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE"
- MGMT: Ignore keys being loaded with invalid type
-----BEGIN PGP SIGNATURE-----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=XxEn
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- qca: If memdump doesn't work, re-enable IBS
- MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE"
- MGMT: Ignore keys being loaded with invalid type
* tag 'for-net-2024-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Ignore keys being loaded with invalid type
Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE"
Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT
Bluetooth: hci_sync: Introduce hci_cmd_sync_run/hci_cmd_sync_run_once
Bluetooth: qca: If memdump doesn't work, re-enable IBS
====================
Link: https://patch.msgid.link/20240830220300.1316772-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmbSPaoTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b01hB/4taX+ezcqTmL0crMQ7N1JCLsWg8kax
A4PTh7Zksj7OPY142Zn3M9D2xyj+ZACQQ9+vSS04Ex+i3CaGPZw4eVk0scxDbU8z
gkotQTk8a/+8dHJG0HMkXoLrp50YECVF2SsaiUXclrfpPDd6WIRadcvf6TUdVsI5
Z7B9tyIad7SEYj8r0iDHje3k1GaYkEqp5mqaB38y5RsDiNXa0mO6uqkbTT8WgooL
KLc8ecB9/igpXIylQghEkfuWpsNAFSG6lZsblhL2/DlE9w5cmrdMo+oEd0+OkJTh
+iyPi6NVaSyW/whmwhePi3RsIsCazGGUG1mKkaLJoOTJDmAGvj8f3fAi
=mZ7/
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.11-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-08-30
The first patch is by Kuniyuki Iwashima for the CAN BCM protocol that
adds a missing proc entry removal when a device unregistered.
Simon Horman fixes the cleanup in the error cleanup path of the m_can
driver's open function.
Markus Schneider-Pargmann contributes 7 fixes for the m_can driver,
all related to the recently added IRQ coalescing support.
The next 2 patches are by me, target the mcp251xfd driver and fix ring
and coalescing configuration problems when switching from CAN-CC to
CAN-FD mode.
Simon Arlott's patch fixes a possible deadlock in the mcp251x driver.
The last patch is by Martin Jocic for the kvaser_pciefd driver and
fixes a problem with lost IRQs, which result in starvation, under high
load situations.
* tag 'linux-can-fixes-for-6.11-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_pciefd: Use a single write when releasing RX buffers
can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open
can: mcp251xfd: mcp251xfd_ring_init(): check TX-coalescing configuration
can: mcp251xfd: fix ring configuration when switching from CAN-CC to CAN-FD mode
can: m_can: Limit coalescing to peripheral instances
can: m_can: Reset cached active_interrupts on start
can: m_can: disable_all_interrupts, not clear active_interrupts
can: m_can: Do not cancel timer from within timer
can: m_can: Remove m_can_rx_peripheral indirection
can: m_can: Remove coalesing disable in isr during suspend
can: m_can: Reset coalescing during suspend/resume
can: m_can: Release irq on error in m_can_open
can: bcm: Remove proc entry when dev is unregistered.
====================
Link: https://patch.msgid.link/20240830215914.1610393-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for RTL8126A rev.b. Its XID is 0x64a. It is basically
based on the one with XID 0x649, but with different firmware file.
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20240830021810.11993-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 27f91aaf49 ("netdev-genl: Add netlink framework functions
for napi"), when an invalid NAPI ID is specified the return value
-EINVAL is used and no extack is set.
Change the return value to -ENOENT and set the extack.
Before this commit:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--do napi-get --json='{"id": 451}'
Netlink error: Invalid argument
nl_len = 36 (20) nl_flags = 0x100 nl_type = 2
error: -22
After this commit:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--do napi-get --json='{"id": 451}'
Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2
extack: {'bad-attr': '.id'}
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240831121707.17562-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Call cifs_reconnect() to wake up processes waiting on negotiate
protocol to handle the case where server abruptly shut down and had no
chance to properly close the socket.
Simple reproducer:
ssh 192.168.2.100 pkill -STOP smbd
mount.cifs //192.168.2.100/test /mnt -o ... [never returns]
Cc: Rickard Andersson <rickaran@axis.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The imx-tve driver is the only remaining user of
imx_drm_connector_destroy(). Move the function to imx-tve.c
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # on imx6q-nitrogen6x
Link: https://patchwork.freedesktop.org/patch/msgid/20240602-drm-imx-cleanup-v3-12-e549e2a43100@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
