Add a new dmsetup message called config, which will return
useful configuration information for the vdo volume and
the uds index associated with it. The output is a YAML
string, and contains a version number to allow future
additions to the content.
Signed-off-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Remove this check to prevent spurious warning messages due to
the behavior of other storage layers. This check was intended
to make sure dm-vdo does not chain metadata bios together.
However, vdo has no control over underlying storage layers,
so the assertion is not always true.
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Clear the dedupe_context pointer in a data_vio whenever ownership of
the context is lost, so that vdo can't examine it accidentally.
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The rp->priv->rpi array is either rpi_msr or rpi_tpmi which have
NR_RAPL_PRIMITIVES number of elements. Thus the > needs to be >=
to prevent an off by one access.
Fixes: 98ff639a72 ("powercap: intel_rapl: Support per Interface primitive information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/86e3a059-504d-4795-a5ea-4a653f3b41f8@stanley.mountain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Extend the code patching selftests with some basic coverage of the new
data patching variants too.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-6-bgray@linux.ibm.com
These changes are for patch_instruction() uses on data. Unlike ppc64
these should not be incorrect as-is, but using the patch_uint() alias
better reflects what kind of data being patched and allows for
benchmarking the effect of different patch_* implementations (e.g.,
skipping instruction flushing when patching data).
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Tested-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-5-bgray@linux.ibm.com
This use of patch_instruction() is working on 32 bit data, and can fail
if the data looks like a prefixed instruction and the extra write
crosses a page boundary. Use patch_u32() to fix the write size.
Fixes: 8734b41b3e ("powerpc/module_64: Fix livepatching for RO modules")
Link: https://lore.kernel.org/all/20230203004649.1f59dbd4@yea/
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Tested-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-4-bgray@linux.ibm.com
The new data patching still needs to be aligned within a
cacheline too for the flushes to work correctly. To simplify
this requirement, we just say data patches must be aligned.
Detect when data patching is not aligned, returning an invalid
argument error.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-3-bgray@linux.ibm.com
patch_instruction() is designed for patching instructions in otherwise
readonly memory. Other consumers also sometimes need to patch readonly
memory, so have abused patch_instruction() for arbitrary data patches.
This is a problem on ppc64 as patch_instruction() decides on the patch
width using the 'instruction' opcode to see if it's a prefixed
instruction. Data that triggers this can lead to larger writes, possibly
crossing a page boundary and failing the write altogether.
Introduce patch_uint(), and patch_ulong(), with aliases patch_u32(), and
patch_u64() (on ppc64) designed for aligned data patches. The patch
size is now determined by the called function, and is passed as an
additional parameter to generic internals.
While the instruction flushing is not required for data patches, it
remains unconditional in this patch. A followup series is possible if
benchmarking shows fewer flushes gives an improvement in some
data-patching workload.
ppc32 does not support prefixed instructions, so is unaffected by the
original issue. Care is taken in not exposing the size parameter in the
public (non-static) interface, so the compiler can const-propagate it
away.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240515024445.236364-2-bgray@linux.ibm.com
The function "scheduler_tick" was renamed to "sched_tick" and a selftest
that used that function for testing function trace filtering used that
function as part of the test.
But the change causes it to fail when run on older kernels. As tests
should not fail on older kernels, add a check to see which name is
available before testing.
Fixes: 86dd6c04ef ("sched/balancing: Rename scheduler_tick() => sched_tick()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make timespec pointers, pointers to const in checklist function. As a
consequence, make list parameter in checklist function pointer to const
as well. Const-correctness increases readability.
Improvement was found by running cppcheck tool on the patched file as
follows:
```
cppcheck --enable=all \
tools/testing/selftests/timers/threadtest.c \
--suppress=missingIncludeSystem \
--suppress=unusedFunction
```
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The overflow/underflow conditions in pata_macio_qc_prep() should never
happen. But if they do there's no need to kill the system entirely, a
WARN and failing the IO request should be sufficient and might allow the
system to keep running.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Kolbjørn and Jonáš reported that their 32-bit PowerMacs were crashing
in pata-macio since commit 09fe2bfa6b ("ata: pata_macio: Fix
max_segment_size with PAGE_SIZE == 64K").
For example:
kernel BUG at drivers/ata/pata_macio.c:544!
Oops: Exception in kernel mode, sig: 5 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 DEBUG_PAGEALLOC PowerMac
...
NIP pata_macio_qc_prep+0xf4/0x190
LR pata_macio_qc_prep+0xfc/0x190
Call Trace:
0xc1421660 (unreliable)
ata_qc_issue+0x14c/0x2d4
__ata_scsi_queuecmd+0x200/0x53c
ata_scsi_queuecmd+0x50/0xe0
scsi_queue_rq+0x788/0xb1c
__blk_mq_issue_directly+0x58/0xf4
blk_mq_plug_issue_direct+0x8c/0x1b4
blk_mq_flush_plug_list.part.0+0x584/0x5e0
__blk_flush_plug+0xf8/0x194
__submit_bio+0x1b8/0x2e0
submit_bio_noacct_nocheck+0x230/0x304
btrfs_work_helper+0x200/0x338
process_one_work+0x1a8/0x338
worker_thread+0x364/0x4c0
kthread+0x100/0x104
start_kernel_thread+0x10/0x14
That commit increased max_segment_size to 64KB, with the justification
that the SCSI core was already using that size when PAGE_SIZE == 64KB,
and that there was existing logic to split over-sized requests.
However with a sufficiently large request, the splitting logic causes
each sg to be split into two commands in the DMA table, leading to
overflow of the DMA table, triggering the BUG_ON().
With default settings the bug doesn't trigger, because the request size
is limited by max_sectors_kb == 1280, however max_sectors_kb can be
increased, and apparently some distros do that by default using udev
rules.
Fix the bug for 4KB kernels by reverting to the old max_segment_size.
For 64KB kernels the sg_tablesize needs to be halved, to allow for the
possibility that each sg will be split into two.
Fixes: 09fe2bfa6b ("ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K")
Cc: stable@vger.kernel.org # v6.10+
Reported-by: Kolbjørn Barmen <linux-ppc@kolla.no>
Closes: https://lore.kernel.org/all/62d248bb-e97a-25d2-bcf2-9160c518cae5@kolla.no/
Reported-by: Jonáš Vidra <vidra@ufal.mff.cuni.cz>
Closes: https://lore.kernel.org/all/3b6441b8-06e6-45da-9e55-f92f2c86933e@ufal.mff.cuni.cz/
Tested-by: Kolbjørn Barmen <linux-ppc@kolla.no>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The driver needs to wait for the on board firmware
to finish its initialization before probing the card.
Commit 959056982a ("drm/amdgpu: Fix discovery initialization failure during pci rescan")
switched from using msleep() to using usleep_range() which
seems to have caused init failures on some navi1x boards. Switch
back to msleep().
Fixes: 959056982a ("drm/amdgpu: Fix discovery initialization failure during pci rescan")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3559
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3500
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Ma Jun <Jun.Ma2@amd.com>
(cherry picked from commit c69b07f7bb)
Cc: stable@vger.kernel.org # 6.10.x
Checksum of xattr block is always crc32c(uuid+blknum+xattrblock), see
ext4_xattr_block_csum_set for detail. Remove incorrect comment that
"id = inum if refcount=1".
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://patch.msgid.link/20240606125508.1459893-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The workaround seems to cause stability issues on other
SDMA 5.2.x IPs.
Fixes: a03ebf1163 ("drm/amdgpu/sdma5.2: Update wptr registers as well as doorbell")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3556
Acked-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2dc3851ef7)
Cc: stable@vger.kernel.org
Skip rlc firmware validation to ignore firmware header size mismatch issues.
This restores the workaround added in
commit 849e133c97 ("drm/amdgpu: Fix the null pointer when load rlc firmware")
Fixes: 3af2c80ae2 ("drm/amdgpu: refine gfx10 firmware loading")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3551
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 89ec85d16e)
Otherwise we can fail to drop the software mutex when
we fail to take the hardware mutex.
Fixes: 76acba7b7f ("drm/amdgpu/gfx11: add a mutex for the gfx semaphore")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This resolves the dereference null return value warning
reported by Coverity.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when use cpu to do page table update under sriov runtime, since mmio
access is blocked, kiq has to be used to flush hdp.
change WREG32_NO_KIQ to WREG32 to allow kiq.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver needs to wait for the on board firmware
to finish its initialization before probing the card.
Commit 959056982a ("drm/amdgpu: Fix discovery initialization failure during pci rescan")
switched from using msleep() to using usleep_range() which
seems to have caused init failures on some navi1x boards. Switch
back to msleep().
Fixes: 959056982a ("drm/amdgpu: Fix discovery initialization failure during pci rescan")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3559
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3500
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Ma Jun <Jun.Ma2@amd.com>
- Various DML 2.1 fixes
- Fix module unload
- Fix construct_phy with MXM connector
- Support UHBR10 link rate on eDP
- Revert updated DCCG wrappers
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and How]
DML2.1 reintegration for several fixes and updates to the DML
code.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Roman Li <roman.li@amd
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Causes hard hangs when resuming after display off on extended/duplicate
modes
[How]
Set the min dispclk to 50Mhz for DCN35
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
The call to construct_phy will fail in cases where connector type is
MXM, and the dc_link won't be properly created/initialized.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Supporting UHBR10 link rate on eDP leverages
the existing DP2.0 code but need to add some small
adjustments in code.
[how]
Acknowledge the given DPCD caps for UHBR10
link rate support and allow DP2.0 programming
sequence and link training for eDP.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DCN4 Cursor has separate degamma block and should always
do Cursor degamma for Cursor color modes.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
eDP 2.0 is introducing support for UHBR link rates, however current eDP ILR
link optimization does not account for UHBR capabilities.
Either UHBR capabilities will be provided via the same 128b/132b rate DPCD caps
that are currently used on DP2.1, or Table 4-13 may be updated to include UHBR
rates.
[HOW]
Add extra Supported Link Rates table translations for UHBR10/13.5/20.
Update eDP link setting optimization search to be aware of 128b/132b DPCD
rate caps in order to unblock UHBR on panels with Supported Link Rates table.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removing redundant condition.
Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previous multi-display HPO fix moved where HPO I/O enable/disable is performed.
The codepath now taken to enable/disable HPO I/O is not used for compliance
test automation, meaning that if a compliance box being driven at a DP1 rate
requests retrain at UHBR, HPO I/O will remain off if it was previously off.
[HOW]
Explicitly update HPO I/O after allocating encoders for test request.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Revert updated DCCG wrappers due to regression
[How]
This reverts commit 680458d41a.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based on the recommendation of MEC FW, update BadOpcode interrupt
handling by unmapping all queues, removing the queue that got the
interrupt from scheduling and remapping rest of the queues back when
using MES scheduler. This is done to prevent the case where unmapping
of the bad queue can fail thereby causing a GPU reset.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MEC FW expects MES to unmap all queues when a VM fault is observed
on a queue and then resumed once the affected process is terminated.
Use the MES Suspend and Resume APIs to achieve this.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add implementation for MES Suspend and Resume APIs to unmap/map
all queues for GFX11. Support for GFX12 will be added when the
corresponding firmware support is in place.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When amdgpu enable enforce_isolation, KFD enables single-process mode in
HWS and sets exec_cleaner_shader bit in MAP_PROCESS.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit applies isolation enforcement to the GFX and Compute rings
in the gfx_v9_4_3 module.
The commit sets `amdgpu_gfx_enforce_isolation_ring_begin_use` and
`amdgpu_gfx_enforce_isolation_ring_end_use` as the functions to be
called when a ring begins and ends its use, respectively.
`amdgpu_gfx_enforce_isolation_ring_begin_use` is called when a ring
begins its use. This function cancels any scheduled
`enforce_isolation_work` and, if necessary, signals the Kernel Fusion
Driver (KFD) to stop the runqueue.
`amdgpu_gfx_enforce_isolation_ring_end_use` is called when a ring ends
its use. This function schedules `enforce_isolation_work` to be run
after a delay.
These functions are part of the Enforce Isolation Handler, which
enforces shader isolation on AMD GPUs to prevent data leakage between
different processes.
The commit also includes a check for the type of the ring. If the type
of the ring is `AMDGPU_RING_TYPE_COMPUTE`, the `xcp_id` of the
`enforce_isolation` structure in the `gfx` structure of the
`amdgpu_device` is set to the `xcp_id` of the ring. This ensures that
the correct `xcp_id` is used when enforcing isolation on compute rings.
The `xcp_id` is an identifier for an XCP partition, and different rings
can be associated with different XCP partitions.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
This commit applies isolation enforcement to the GFX and Compute rings
in the gfx_v9_0 module.
The commit sets `amdgpu_gfx_enforce_isolation_ring_begin_use` and
`amdgpu_gfx_enforce_isolation_ring_end_use` as the functions to be
called when a ring begins and ends its use, respectively.
`amdgpu_gfx_enforce_isolation_ring_begin_use` is called when a ring
begins its use. This function cancels any scheduled
`enforce_isolation_work` and, if necessary, signals the Kernel Fusion
Driver (KFD) to stop the runqueue.
`amdgpu_gfx_enforce_isolation_ring_end_use` is called when a ring ends
its use. This function schedules `enforce_isolation_work` to be run
after a delay.
These functions are part of the Enforce Isolation Handler, which
enforces shader isolation on AMD GPUs to prevent data leakage between
different processes.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
This commit introduces the Enforce Isolation Handler designed to enforce
shader isolation on AMD GPUs, which helps to prevent data leakage
between different processes.
The handler counts the number of emitted fences for each GFX and compute
ring. If there are any fences, it schedules the `enforce_isolation_work`
to be run after a delay of `GFX_SLICE_PERIOD`. If there are no fences,
it signals the Kernel Fusion Driver (KFD) to resume the runqueue.
The function is synchronized using the `enforce_isolation_mutex`.
This commit also introduces a reference count mechanism
(kfd_sch_req_count) to keep track of the number of requests to enable
the KFD scheduler. When a request to enable the KFD scheduler is made,
the reference count is decremented. When the reference count reaches
zero, a delayed work is scheduled to enforce isolation after a delay of
GFX_SLICE_PERIOD.
When a request to disable the KFD scheduler is made, the function first
checks if the reference count is zero. If it is, it cancels the delayed
work for enforcing isolation and checks if the KFD scheduler is active.
If the KFD scheduler is active, it sends a request to stop the KFD
scheduler and sets the KFD scheduler state to inactive. Then, it
increments the reference count.
The function is synchronized using the kfd_sch_mutex to ensure that the
KFD scheduler state and reference count are updated atomically.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Provide amdgpu_amdkfd_stop_sched() for amdgpu to stop KFD scheduling
compute work on HIQ. amdgpu_amdkfd_start_sched() resumes the scheduling.
When amdgpu_amdkfd_stop_sched is called, KFD will unmap queues from
runlist. If users send ioctls to KFD to create queues, they'll be added
but those queues won't be mapped to runlist (so not scheduled) until
amdgpu_amdkfd_start_sched is called.
v2: fix build (Alex)
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
