- Add support for PCIe on the R-Car V4M SoC and the Gray Hawk
development board,
- Add support for watchdog, OS timer, keyboard switch, SDHI, and MMCIF
on the Genmai development board,
- Add support for watchdog on the RSK+RZA1 development board,
- Add support for QSPI NOR FLASH on the RZ/G2UL SMARC SoM,
- Add support for E-FUSE on the R-Car V3U, S4-8, V4H, and V4M SoCs,
- Use interrupts-extended where it makes sense,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZxJK7wAKCRCKwlD9ZEnx
cIc9AP9qfjKj9dER6XolPiFCNTVkQ4mUwXWSfw2tfcF7c14lQQEArTm1rPjJFnE6
ov1fEylEw6cf/lX63RAx1cO3b2RYOwQ=
=d+VK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczyE4ACgkQYKtH/8kJ
UiezOQ//VR2Hkzcr6q3DQLolO6p+DmbXCWmkj/q+xlRBSE+JUsPIE9TqK4Ajb+wa
b/EenZ1wLNtbtqjBuhKDH40Y0Qs2dbUTENBW0nJAegYouiTmFnJAvznOe4nyhKgT
3U8FDnW0Bh+rF078zNG1tsnJ4sO4SL4/ZHBHh4bPVMgyoeCovzofwdw7fu9UMlrV
zXzIPuroPfttgErJfLv7IxjXkQIeLXZn/Bf7Ezqn8RZTbtJOfku8xdwMkhhix4za
FFsECfehEBI/we2bUSxAKSd2z5/RynNbH/a6Zjsbwj+QytesL0e8qWfRZCURjsUF
KJWOpnKZ4ueTSeZdCzxZ1prt9OjJEY8Eh/pzcJWSHk9gYPnllQO7ma6NYaY6qklZ
pMoEfdPEN/VsNs68kq2OC89afb2R5hkbmPv0whj3PBNTbN5PC+G8fjKATe3jHMKr
1aXpP3f79hBIjGF817KioXPVRP6J1A18TYh0c0hHqDgvlC1MiHLW6Va5BTDibWNn
JiQgkYz+7lrJNS5ll8LiUVzUKxLF6gjcsMMCQqLuJfHDmyKGYKcJkZNGzJr7Mp9N
6w+4rYrIiKFzESXRFQPeeRRFOZtLmbuPIw6SzA8VvpY0VvueuYw5xXlXIUfCZYIn
hFsIk10LYPKi2V6d7LjjjbJZw9ic2IXzcwbkv1qEqlxML/WWMhQ=
=XVt1
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.13-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.13
- Add support for PCIe on the R-Car V4M SoC and the Gray Hawk
development board,
- Add support for watchdog, OS timer, keyboard switch, SDHI, and MMCIF
on the Genmai development board,
- Add support for watchdog on the RSK+RZA1 development board,
- Add support for QSPI NOR FLASH on the RZ/G2UL SMARC SoM,
- Add support for E-FUSE on the R-Car V3U, S4-8, V4H, and V4M SoCs,
- Use interrupts-extended where it makes sense,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (53 commits)
arm64: dts: renesas: rzg3s-smarc: Use interrupts-extended for gpio-keys
arm64: dts: renesas: beacon-renesom: Use interrupts-extended for touchscreen
arm64: dts: renesas: Use interrupts-extended for WLAN
arm64: dts: renesas: Use interrupts-extended for video decoders
arm64: dts: renesas: Use interrupts-extended for USB muxes
arm64: dts: renesas: Use interrupts-extended for PMICs
arm64: dts: renesas: Use interrupts-extended for I/O expanders
arm64: dts: renesas: Use interrupts-extended for HDMI bridges
arm64: dts: renesas: Use interrupts-extended for Ethernet PHYs
arm64: dts: renesas: Use interrupts-extended for DisplayPort bridges
ARM: dts: renesas: kzm9g: Use interrupts-extended for sensors
ARM: dts: renesas: kzm9g: Use interrupts-extended for I/O expander
ARM: dts: renesas: r8a7742-iwg21m: Use interrupts-extended for RTC
ARM: dts: renesas: iwg22d-sodimm: Use interrupts-extended for port expander
ARM: dts: renesas: Use interrupts-extended for video decoders
ARM: dts: renesas: Use interrupts-extended for touchpanels
ARM: dts: renesas: Use interrupts-extended for PMICs
ARM: dts: renesas: Use interrupts-extended for HDMI bridges
ARM: dts: renesas: Use interrupts-extended for Ethernet PHYs
ARM: dts: renesas: Use interrupts-extended for Ethernet MACs
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add gmac, mdio, and phy nodes to enable the gigabit Ethernet ports on
the TH1520 SoC-based BeagleV Ahead and Sipeed Lichee Pi 4a boards.
The dwmac-thead driver and dt binding have been accepted by netdev and
are in linux-next as well as the dts patch in this pull request. I have
tested next-20241108 on the Ahead and LPi4a boards, and Ethernet works
correctly.
Signed-off-by: Drew Fustini <drew@pdp7.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSy8G7QpEpV9aCf6Lbb7CzD2SixDAUCZy7HegAKCRDb7CzD2Six
DFKlAP0bQEEODS17qnQ5o08MtzB7oi5zCbgCj5Dv9o4AMKd/VwD/SQftL0u53DR/
6/uaNCXcjlxVflOR7queyUexSu2TmAs=
=n4l7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=qfiW
-----END PGP SIGNATURE-----
Merge tag 'thead-dt-for-v6.13-p2' of https://github.com/pdp7/linux into soc/dt
T-HEAD Devicetrees for v6.13, part 2
Add gmac, mdio, and phy nodes to enable the gigabit Ethernet ports on
the TH1520 SoC-based BeagleV Ahead and Sipeed Lichee Pi 4a boards.
The dwmac-thead driver and dt binding have been accepted by netdev and
are in linux-next as well as the dts patch in this pull request. I have
tested next-20241108 on the Ahead and LPi4a boards, and Ethernet works
correctly.
Signed-off-by: Drew Fustini <drew@pdp7.com>
* tag 'thead-dt-for-v6.13-p2' of https://github.com/pdp7/linux:
riscv: dts: thead: Add TH1520 ethernet nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add nodes for pin controllers on the T-Head TH1520 RISC-V SoC. The
yaml binding and pinctrl-th1520 driver has been merged into next by
Linus W and will be included in the 6.13 pinctrl PR.
The TH1520 GPIO controllers are already supported by the gpio-dwapb
driver. This PR improves GPIO support by adding GPIO ranges and GPIO
line names for the BeagleV Ahead and LicheePi 4A boards. Support is
added for the built-in LEDs on the Ahead board.
Signed-off-by: Drew Fustini <drew@pdp7.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSy8G7QpEpV9aCf6Lbb7CzD2SixDAUCZxURbgAKCRDb7CzD2Six
DDMiAQD+joKsLCYlTe36dOFjgpZ5/K8tbjcXXoLe/3/HpFjG0wEArvUquuDjcxSa
op9RWVYs+TM9Xheyfgf+cMqL/XQynQ8=
=Ao5X
-----END PGP SIGNATURE-----
Merge tag 'thead-dt-for-v6.13' of https://github.com/pdp7/linux into soc/dt
T-HEAD Devicetrees for v6.13
Add nodes for pin controllers on the T-Head TH1520 RISC-V SoC. The
yaml binding and pinctrl-th1520 driver has been merged into next by
Linus W and will be included in the 6.13 pinctrl PR.
The TH1520 GPIO controllers are already supported by the gpio-dwapb
driver. This PR improves GPIO support by adding GPIO ranges and GPIO
line names for the BeagleV Ahead and LicheePi 4A boards. Support is
added for the built-in LEDs on the Ahead board.
Signed-off-by: Drew Fustini <drew@pdp7.com>
* tag 'thead-dt-for-v6.13' of https://github.com/pdp7/linux:
riscv: dts: thead: remove enabled property for spi0
riscv: dts: thead: Add missing GPIO clock-names
riscv: dtb: thead: Add BeagleV Ahead LEDs
riscv: dts: thead: Add TH1520 pinctrl settings for UART0
riscv: dts: thead: Add Lichee Pi 4M GPIO line names
riscv: dts: thead: Adjust TH1520 GPIO labels
riscv: dts: thead: Add TH1520 GPIO ranges
riscv: dts: thead: Add TH1520 pin control nodes
This patch generates the code for the operation of reading data from
the device into a sub-function.
Then, it can be called during the device status data saving phase of
the live migration process and the device status data reading function
in debugfs.
Thereby reducing the redundant code of the driver.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20241112073322.54550-3-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In the current driver, vdev is obtained from struct
hisi_acc_vf_core_device through the container_of function.
This method is used in many places in the driver. In order to
reduce this repetitive operation, It was extracted into
a public function.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20241112073322.54550-2-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCZzNj9BQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5QKDAQCkbTcWVTnMrdz/0hV9JVmoLCFs6GWZ
cTjaBApOQge1pgD/bTQGJ0fYP6sWEzMPSTMXr6uJaJtlmpsGdPNoOmKUTQU=
=+K7B
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"One bug fix, one performance improvement, and the use of
static_assert:
- The bug fix addresses "only a cosmetic change" commit, which didn't
take into account the original 'ima' template definition.
- The performance improvement limits the atomic_read()"
* tag 'integrity-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Use static_assert() to check struct sizes
evm: stop avoidably reading i_writecount in evm_file_release
ima: fix buffer overrun in ima_eventdigest_init_common
KCSAN reports a data race when access the krcp->monitor_work.timer.expires
variable in the schedule_delayed_monitor_work() function:
<snip>
BUG: KCSAN: data-race in __mod_timer / kvfree_call_rcu
read to 0xffff888237d1cce8 of 8 bytes by task 10149 on cpu 1:
schedule_delayed_monitor_work kernel/rcu/tree.c:3520 [inline]
kvfree_call_rcu+0x3b8/0x510 kernel/rcu/tree.c:3839
trie_update_elem+0x47c/0x620 kernel/bpf/lpm_trie.c:441
bpf_map_update_value+0x324/0x350 kernel/bpf/syscall.c:203
generic_map_update_batch+0x401/0x520 kernel/bpf/syscall.c:1849
bpf_map_do_batch+0x28c/0x3f0 kernel/bpf/syscall.c:5143
__sys_bpf+0x2e5/0x7a0
__do_sys_bpf kernel/bpf/syscall.c:5741 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5739 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5739
x64_sys_call+0x2625/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xc9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
write to 0xffff888237d1cce8 of 8 bytes by task 56 on cpu 0:
__mod_timer+0x578/0x7f0 kernel/time/timer.c:1173
add_timer_global+0x51/0x70 kernel/time/timer.c:1330
__queue_delayed_work+0x127/0x1a0 kernel/workqueue.c:2523
queue_delayed_work_on+0xdf/0x190 kernel/workqueue.c:2552
queue_delayed_work include/linux/workqueue.h:677 [inline]
schedule_delayed_monitor_work kernel/rcu/tree.c:3525 [inline]
kfree_rcu_monitor+0x5e8/0x660 kernel/rcu/tree.c:3643
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0x483/0x9a0 kernel/workqueue.c:3310
worker_thread+0x51d/0x6f0 kernel/workqueue.c:3391
kthread+0x1d1/0x210 kernel/kthread.c:389
ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 UID: 0 PID: 56 Comm: kworker/u8:4 Not tainted 6.12.0-rc2-syzkaller-00050-g5b7c893ed5ed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events_unbound kfree_rcu_monitor
<snip>
kfree_rcu_monitor() rearms the work if a "krcp" has to be still
offloaded and this is done without holding krcp->lock, whereas
the kvfree_call_rcu() holds it.
Fix it by acquiring the "krcp->lock" for kfree_rcu_monitor() so
both functions do not race anymore.
Reported-by: syzbot+061d370693bdd99f9d34@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/ZxZ68KmHDQYU0yfD@pc636/T/
Fixes: 8fc5494ad5 ("rcu/kvfree: Move need_offload_krc() out of krcp->lock")
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Notice that tt_get_tt_zone() need not use the ret variable in
the tt_thermal_zones list walk and make it return right after
incrementing the reference counter of the matching entry.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6120304.lOV4Wx5bFT@rjwysocki.net
Code after the return statement is dead. Enable preemption before
returning from srcu_drive_gp().
This will be important when/if PREEMPT_AUTO (lazy resched) gets merged.
Fixes: 65b4a59557 ("srcu: Make Tiny SRCU explicitly disable preemption")
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit removes the open-coded one-byte cmpxchg() emulation from
rcu_trc_cmpxchg_need_qs(), replacing it with just cmpxchg() given the
latter's new-found ability to handle single-byte arguments across all
architectures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
There is only ever the one read-exit task, and there is no module
parameter named rcutorture.read_exit, so remove the bogus documentation.
Instead, use rcutorture.read_exit_burst to enable/disable read-exit
race testing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <bpf@vger.kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit tests the ->start_poll() and ->start_poll_full() functions
with interrupts disabled, but only for RCU variants setting the
->start_poll_irqsoff flag.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
The header comment for both start_poll_synchronize_rcu() and
start_poll_synchronize_rcu_full() state that interrupts must be enabled
when calling these two functions, and there is a lockdep assertion in
start_poll_synchronize_rcu_common() enforcing this restriction. However,
there is no need for this restrictions, as can be seen in call_rcu(),
which does wakeups when interrupts are disabled.
This commit therefore removes the lockdep assertion and the comments.
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
There are now architectures for which all deep-idle and entry-exit
functions are properly inlined or marked noinstr. Such architectures do
not need synchronize_rcu_tasks_rude(), or will not once RCU Tasks has
been modified to pay attention to idle tasks. This commit therefore
allows a CONFIG_ARCH_HAS_NOINSTR_MARKINGS Kconfig option to turn
synchronize_rcu_tasks_rude() into a no-op.
To facilitate testing, kernels built by rcutorture scripting will enable
RCU Tasks Trace even on systems that do not need it.
[ paulmck: Apply Peter Zijlstra feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit adds the rcuog kthreads to the list of callback-offloading
kthreads that can be affinitied away from worker CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Replace the 32-bit MSR access function with a 64-bit variant to simplify
the call site, eliminating unnecessary 32-bit value manipulations.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Link: https://patch.msgid.link/20241106182313.165297-1-chang.seok.bae@intel.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The RCU_NOCB_CPU help text currently fails to mention rcuog kthreads,
so this commit adds this information.
Reported-by: Olivier Langlois <olivier@trillion01.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
sizeof(unsigned long) * 8 is the number of bits in an unsigned long
variable, replace it with BITS_PER_LONG macro to make it simpler.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This silences the following coccinelle warning:
WARNING: sum of probable bitmasks, consider |
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
The stall warning prints 16 bits since commit 171476775d
("context_tracking: Convert state to atomic_t").
Fixes: 171476775d ("context_tracking: Convert state to atomic_t")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Ensure sugov_eas_rebuild_sd() is always called when sugov_init()
succeeds. The out goto initialized sugov without forcing the rebuild.
Previously the missing call to sugov_eas_rebuild_sd() could lead to EAS
not being enabled on boot when it should have been, because it requires
all policies to be controlled by schedutil while they might not have
been initialized yet.
Fixes: e7a1b32e43 ("cpufreq: Rebuild sched-domains when removing cpufreq driver")
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/35e572d9-1152-406a-9e34-2525f7548af9@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/acpi to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/9ee1a9813f53698be62aab9d810b2d97a2a9f186.1731397722.git.u.kleine-koenig@baylibre.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When testing a `clang` upgrade with Rust Binder, Alice encountered [1] a
build failure caused by `bindgen` not translating some symbols related to
tracepoints. This was caused by commit 2e770edd8ce1 ("[libclang] Compute
the right spelling location") changing the behavior of a function exposed
by `libclang`. `bindgen` fixed the regression in commit 600f63895f73
("Use clang_getFileLocation instead of clang_getSpellingLocation").
However, the regression fix is only available in `bindgen` versions
0.69.5 or later (it was backported for 0.69.x). This means that when
older bindgen versions are used with new versions of `libclang`, `bindgen`
may do the wrong thing, which could lead to a build failure.
Alice encountered the bug with some header files related to tracepoints,
but it could also cause build failures in other circumstances. Thus,
always emit a warning when using an old `bindgen` with a new `libclang`
so that other people do not have to spend time chasing down the same
bug.
However, testing just the version is inconvenient, since distributions
do patch their packages without changing the version, so I reduced the
issue into the following piece of code that can trigger the issue:
#define F(x) int x##x
F(foo);
In particular, an unpatched `bindgen` will ignore the macro expansion
and thus not provide a declaration for the exported `int`.
Thus add a build test to `rust_is_available.sh` using the code above
(that is only triggered if the versions appear to be affected), following
what we did for the 0.66.x issue.
Moreover, I checked the status in the major distributions we have
instructions for:
- Fedora 41 was affected but is now OK, since it now ships `bindgen`
0.69.5.
Thanks Ben for the quick reply on the updates that were ongoing.
Fedora 40 and earlier are OK (older `libclang`, and they also now
carry `bindgen` 0.69.5).
- Debian Sid was affected but is now OK, since they now ship a patched
`bindgen` binary (0.66.1-7+b3). The issue was reported to Debian by
email and then as a bug report [2].
Thanks NoisyCoil and Matthias for the quick replies. NoisyCoil handled
the needed updates. Debian may upgrade to `bindgen` 0.70.x, too.
Debian Testing is OK (older `libclang` so far).
- Ubuntu non-LTS (oracular) is affected. The issue was reported to Ubuntu
by email and then as a bug report [3].
Ubuntu LTS is not affected (older `libclang` so far).
- Arch Linux, Gentoo Linux and openSUSE should be OK (newer `bindgen` is
provided). Nix as well (older `libclang` so far).
This issue was also added to our "live list" that tracks issues around
distributions [4].
Cc: Ben Beasley <code@musicinmybrain.net>
Cc: NoisyCoil <noisycoil@tutanota.com>
Cc: Matthias Geiger <werdahias@riseup.net>
Link: https://lore.kernel.org/rust-for-linux/20241030-bindgen-libclang-warn-v1-1-3a7ba9fedcfe@google.com/ [1]
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1086510 [2]
Link: https://bugs.launchpad.net/ubuntu/+source/rust-bindgen-cli/+bug/2086639 [3]
Link: https://github.com/Rust-for-Linux/linux/issues/1127 [4]
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241111201607.653149-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
- Fix repeated word "when" in backporting documentation
- Remove trailing whitespace after '$' character
These issues were reported by checkpatch.pl. No functional changes.
Signed-off-by: Abhinav Saxena <xandfury@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241107061911.106040-1-xandfury@gmail.com
acpi_dev_hid_match() does not check for adev == NULL, dereferencing
it unconditional.
Add a check for adev being NULL before calling acpi_dev_hid_match().
At the moment acpi_quirk_skip_serdev_enumeration() is never called with
a controller_parent without an ACPI companion, but better safe than sorry.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241109220028.83047-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Vexia EDU ATLA 10 tablet (9V version) which shipped with Android 4.2
as factory OS has the usual broken DSDT issues for x86 Android tablets.
On top of that this tablet is special because all its LPSS island
peripherals are enumerated as PCI devices rather then as ACPI devices as
they typically are.
For the x86-android-tablets kmod to be able to instantiate a serdev client
for the Bluetooth HCI on this tablet, an ACPI_QUIRK_UART1_SKIP quirk is
necessary.
Modify acpi_dmi_skip_serdev_enumeration() to work with PCI enumerated
UARTs without an UID, such as the UARTs on this tablet.
Also make acpi_dmi_skip_serdev_enumeration() exit early if there are no
quirks, since there is nothing to do then.
And add the necessary quirks for the Vexia EDU ATLA 10 tablet.
This should compile with CONFIG_PCI being unset without issues because
dev_is_pci() is defined as "(false)" then.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241109215936.83004-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Explicitly mention how to bisect -next, as nothing in the kernel tree
currently explains that bisects between -next versions won't work well
and it's better to bisect between mainline and -next.
Co-developed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/ec19d5fc503ff7db3d4c4ff9e97fff24cc78f72a.1730808651.git.linux@leemhuis.info
Use vmalloc_array() instead of vmalloc() to calculate the number of
bytes to allocate.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20241112182633.172944-2-thorsten.blum%40linux.dev
Currently the cpuset code uses group_subsys_on_dfl() to check if we
are running with cgroup v2. If CONFIG_CPUSETS_V1 isn't set, there is
really no need to do this check and we can optimize out some of the
unneeded v1 specific code paths. Introduce a new cpuset_v2() and use it
to replace the cgroup_subsys_on_dfl() check to further optimize the
code.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since commit ff0ce721ec ("cgroup/cpuset: Eliminate unncessary
sched domains rebuilds in hotplug"), there is only one
rebuild_sched_domains_locked() call per hotplug operation. However,
writing to the various cpuset control files may still casue more than
one rebuild_sched_domains_locked() call to happen in some cases.
Juri had found that two rebuild_sched_domains_locked() calls in
update_prstate(), one from update_cpumasks_hier() and another one from
update_partition_sd_lb() could cause cpuset partition to be created
with null total_bw for DL tasks. IOW, DL tasks may not be scheduled
correctly in such a partition.
A sample command sequence that can reproduce null total_bw is as
follows.
# echo Y >/sys/kernel/debug/sched/verbose
# echo +cpuset >/sys/fs/cgroup/cgroup.subtree_control
# mkdir /sys/fs/cgroup/test
# echo 0-7 > /sys/fs/cgroup/test/cpuset.cpus
# echo 6-7 > /sys/fs/cgroup/test/cpuset.cpus.exclusive
# echo root >/sys/fs/cgroup/test/cpuset.cpus.partition
Fix this double rebuild_sched_domains_locked() calls problem
by replacing existing calls with cpuset_force_rebuild() except
the rebuild_sched_domains_cpuslocked() call at the end of
cpuset_handle_hotplug(). Checking of the force_sd_rebuild flag is
now done at the end of cpuset_write_resmask() and update_prstate()
to determine if rebuild_sched_domains_locked() should be called or not.
The cpuset v1 code can still call rebuild_sched_domains_locked()
directly as double rebuild_sched_domains_locked() calls is not possible.
Reported-by: Juri Lelli <juri.lelli@redhat.com>
Closes: https://lore.kernel.org/lkml/ZyuUcJDPBln1BK1Y@jlelli-thinkpadt14gen4.remote.csb/
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Revert commit 3ae0b77321 ("cgroup/cpuset: Allow suppression of sched
domain rebuild in update_cpumasks_hier()") to allow for an alternative
way to suppress unnecessary rebuild_sched_domains_locked() calls in
update_cpumasks_hier() and elsewhere in a following commit.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This function can fail but its return value isn't passed onto the
caller. Presumably this could result in a broken state.
Fixes: 66d5b53e20 ("KVM: arm64: Allocate memory mapped at hyp for host sve state in pKVM")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241112105604.795809-1-james.clark@linaro.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Merge the pmdomain fixes for v6.12-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.13.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20241104190742.276710-1-robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The qcom-cpucp mailbox irq is expected to function during suspend-resume
cycle particularly when the scmi cpufreq driver can query the current
frequency using the get_level message after the cpus are brought up during
resume. Hence mark the irq with IRQF_NO_SUSPEND flag to fix the do_xfer
failures we see during resume.
Err Logs:
arm-scmi firmware:scmi: timed out in resp(caller:do_xfer+0x164/0x568)
cpufreq: cpufreq_online: ->get() failed
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/ZtgFj1y5ggipgEOS@hovoldconsulting.com/
Fixes: 0e2a9a0310 ("mailbox: Add support for QTI CPUCP mailbox controller")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Cc: stable@vger.kernel.org
Message-ID: <20241030125512.2884761-7-quic_sibis@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Duplicate opps reported by buggy SCP firmware currently show up
as warnings even though the only functional impact is that the
level/index remain inaccessible. Make it less scary for the end
user by using dev_info instead, along with FW_BUG tag.
Suggested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org
Message-ID: <20241030125512.2884761-4-quic_sibis@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Buggy firmware can reply with duplicated PERF opps descriptors.
Ensure that the bad duplicates reported by the platform firmware doesn't
get added to the opp-tables.
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Closes: https://lore.kernel.org/lkml/ZoQjAWse2YxwyRJv@hovoldconsulting.com/
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org
Message-ID: <20241030125512.2884761-3-quic_sibis@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.12-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.13.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The commit 8396c793ff ("mmc: dw_mmc: Fix IDMAC operation with pages
bigger than 4K") increased the max_req_size, even for 4K pages, causing
various issues:
- Panic booting the kernel/rootfs from an SD card on Rockchip RK3566
- Panic booting the kernel/rootfs from an SD card on StarFive JH7100
- "swiotlb buffer is full" and data corruption on StarFive JH7110
At this stage no fix have been found, so it's probably better to just
revert the change.
This reverts commit 8396c793ff.
Cc: stable@vger.kernel.org
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Fixes: 8396c793ff ("mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K")
Closes: https://lore.kernel.org/linux-mmc/614692b4-1dbe-31b8-a34d-cb6db1909bb7@w6rz.net/
Closes: https://lore.kernel.org/linux-mmc/CAC8uq=Ppnmv98mpa1CrWLawWoPnu5abtU69v-=G-P7ysATQ2Pw@mail.gmail.com/
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-ID: <20241110114700.622372-1-aurelien@aurel32.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The recent introduction of reset control in pwrseq_simple introduced
a regression for platforms without RESET_CONTROLLER support, because
devm_reset_control_get_optional_shared() would return NULL and make all
resets no-ops. Instead of enforcing this dependency, rely on this behavior
to determine reset support. As a benefit we can get the rid of the
use_reset flag.
Fixes: 73bf4b7381 ("mmc: pwrseq_simple: add support for one reset control")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-ID: <20241108130647.8281-1-wahrenst@gmx.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently, the MMC_CAP2_CRYPTO flag is set by default for eMMC hosts.
However, this flag should not be set for hosts that do not support inline
encryption.
The 'crypto' clock, as described in the documentation, is used for data
encryption and decryption. Therefore, only hosts that are configured with
this 'crypto' clock should have the MMC_CAP2_CRYPTO flag set.
Fixes: 7b438d0377 ("mmc: mtk-sd: add Inline Crypto Engine clock control")
Fixes: ed299eda8f ("mmc: mtk-sd: fix devm_clk_get_optional usage")
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Cc: stable@vger.kernel.org
Message-ID: <20241111085039.26527-1-andy-ld.lu@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
