Currently, the CONFIG_SPECULATION_MITIGATIONS is halfway populated,
where some mitigations have entries in Kconfig, and they could be
modified, while others mitigations do not have Kconfig entries, and
could not be controlled at build time.
Create an entry for the RETBLEED CPU mitigation under
CONFIG_SPECULATION_MITIGATIONS. This allow users to enable or disable
it at compilation time.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240729164105.554296-6-leitao@debian.org
Add new ACPI ID AMDI0107 used by upcoming AMD platform to the PMF
supported list of devices.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240723132451.3488326-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To initiate the HW deep state transition, the OS_HINT command has to be
sent to the PMFW. Add this support to the platforms that belong to family
1Ah model 60h series.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240718150119.3427190-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
rsnd is implementing own DMAEngine code, but we can replace it with
pcm_dmaengine code, because these are almost same.
Let's use existing and stable code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87cymvk3t5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_mod_confirm_ssi() confirms mod sanity, it should always be
confirmed, not only when DEBUG. This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ed7bk4qt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASUS ROG Ally X has the same issue as the G14 where it advertises
SPS support but doesn't use it.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240729020831.28117-1-luke@ljones.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Since commit e2ffcda162 ("ACPI: OSL: Allow Notify () handlers to run on
all CPUs") ACPI notify handlers like the intel-vbtn notify_handler() may
run on multiple CPU cores racing with themselves.
This race gets hit on Dell Venue 7140 tablets when undocking from
the keyboard, causing the handler to try and register priv->switches_dev
twice, as can be seen from the dev_info() message getting logged twice:
[ 83.861800] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event
[ 83.861858] input: Intel Virtual Switches as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17
[ 83.861865] intel-vbtn INT33D6:00: Registering Intel Virtual Switches input-dev after receiving a switch event
After which things go seriously wrong:
[ 83.861872] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input17'
...
[ 83.861967] kobject: kobject_add_internal failed for input17 with -EEXIST, don't try to register things with the same name in the same directory.
[ 83.877338] BUG: kernel NULL pointer dereference, address: 0000000000000018
...
Protect intel-vbtn notify_handler() from racing with itself with a mutex
to fix this.
Fixes: e2ffcda162 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs")
Reported-by: En-Wei Wu <en-wei.wu@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2073001
Tested-by: Kostadin Stoilov <kmstoilov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240729120443.14779-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
If the value of max_speed_hz is 0, it may cause a division by zero
error in hisi_calc_effective_speed().
The value of max_speed_hz is provided by firmware.
Firmware is generally considered as a trusted domain. However, as
division by zero errors can cause system failure, for defense measure,
the value of max_speed is validated here. So 0 is regarded as invalid
and an error code is returned.
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Jay Fang <f.fangjian@huawei.com>
Link: https://patch.msgid.link/20240730032040.3156393-3-liudingyuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The speed specified by the user is used to calculate the clk_div based
on the max_speed_hz in hisi_calc_effective_speed. A very low speed
value can lead to a clk_div larger than the variable range. Avoid this
by setting the min_speed_hz so that such a small speed value is
rejected. __spi_validate() in spi.c will return -EINVAL for the
specified speed_hz lower than min_speed_hz.
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Jay Fang <f.fangjian@huawei.com>
Link: https://patch.msgid.link/20240730032040.3156393-2-liudingyuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cros_ec_get_host_command_version_mask() function requires that the
caller must have ec_dev->lock mutex before calling it. This requirement
was not met and as a result it was possible that two commands were sent
to the device at the same time.
The problem was observed while using UART backend which doesn't use any
additional locks, unlike SPI backend which locks the controller until
response is received.
Fixes: f74c7557ed ("platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure")
Cc: stable@vger.kernel.org
Signed-off-by: Patryk Duda <patrykd@google.com>
Link: https://lore.kernel.org/r/20240730104425.607083-1-patrykd@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
On the off chance that clock value ends up being too high (by means
of skl_ddi_calculate_wrpll() having been called with big enough
value of crtc_state->port_clock * 1000), one possible consequence
may be that the result will not be able to fit into signed int.
Fix this issue by moving conversion of clock parameter from kHz to Hz
into the body of skl_ddi_calculate_wrpll(), as well as casting the
same parameter to u64 type while calculating the value for AFE clock.
This both mitigates the overflow problem and avoids possible erroneous
integer promotion mishaps.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 82d3543701 ("drm/i915/skl: Implementation of SKL DPLL programming")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729174035.25727-1-n.zhandarovich@fintech.ru
All architectures with use set_handle_irq() to set the root chip interrupt
handler call that handler from C code, so there's no need for these
handlers to be marked asmlinkage.
Remove asmlinkage for all handlers registered with set_handle_irq().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/all/20240729112606.1581732-1-ruanjinjie@huawei.com
Print error and return error code on main / IPI / MSI domain
initialization failure. Use WARN_ON() instead of BUG_ON().
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240711160907.31012-11-kabel@kernel.org
Refactor the initial memory regions mapping:
- put into its own function
- return error numbers on failure
- use WARN_ON() instead of BUG_ON()
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240711160907.31012-10-kabel@kernel.org
For consistency across the driver, use the u32 type instead of unsigned
long for holding register values and return value of cpu_logical_map().
One exception is when the variable is referenced for passing into
for_each_set_bit(), in which case it has to be unsigned long.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240711160907.31012-9-kabel@kernel.org
Refactor the mpic_reenable_percpu() and mpic_resume() functions to make
them a little bit simpler.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240711160907.31012-5-kabel@kernel.org
When iterating, use either the irq_hw_number_t type or the unsigned int
type for the iterator variable, depending on whether the variable
represents HW IRQ number or whether it is added to a IRQ number.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240711160907.31012-3-kabel@kernel.org
Refactor the handling of IPI interrupts
- put into own function mpic_handle_ipi_irq(), similar to
mpic_handle_msi_irq()
- rename the variable holding the doorbell cause register to "cause"
- retype and rename the variable holding the IPI HW IRQ number to
"irq_hw_number_t i"
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-11-kabel@kernel.org
Refactor the mpic_handle_msi_irq() function to make it simpler:
- drop the function arguments, they are not needed
- rename the variable holding the doorbell cause register to "cause"
- rename the iterating variable to "i"
- use for_each_set_bit() (requires retyping "cause" to unsigned long)
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-10-kabel@kernel.org
Use FIELD_GET() and named register mask constant when reading the number
of supported interrupts / current interrupt.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-9-kabel@kernel.org
Use mpic_domain::hwirq_max at runtime instead of reading the same value
over and over from the MPIC_INT_CONTROL register.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-8-kabel@kernel.org
Change symbol prefixes from armada_370_xp_ or others to mpic_.
The rationale is that it is shorter and more generic (this controller
is called MPIC and is also used on Armada 38x and 39x).
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-7-kabel@kernel.org
Add some blank lines and other indentation improvements.
Checkpatch now stops complaining.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-6-kabel@kernel.org
Refactor the ipi_resume() function to drop one indentation level.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-5-kabel@kernel.org
Use !virq instead of virq == 0 when checking for availability of the
virq.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-4-kabel@kernel.org
The return type of irq_find_mapping() and irq_linear_revmap() is
unsigned int. Use the unsigned int type for the variables storing the
return value.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-3-kabel@kernel.org
Rename the irq variable to virq in the ipi_resume() function for
consistency with the rest of the code.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240711115748.30268-2-kabel@kernel.org
Where possible, declare iterators in for cycle. This is possible since
kernel uses -std=gnu11.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/all/20240708151801.11592-11-kabel@kernel.org
Simplify the code in the is_percpu_irq() function. Instead of
if (condition)
return true;
return false;
simply return condition.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240708151801.11592-9-kabel@kernel.org
Use unsigned int instead of int for variable storing the cpu number.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/all/20240708151801.11592-8-kabel@kernel.org
Change the long ARMADA_370_XP_ prefix in register constants (ARMADA_375_
in one case) to MPIC_. The rationale is that it is shorter and more
generic (this controller is called MPIC and is also used on Armada 38x
and 39x).
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/all/20240708151801.11592-7-kabel@kernel.org
Drop parentheses where not needed and add them where it makes sense in
register constant definitions.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240708151801.11592-6-kabel@kernel.org
Change spaces to tabs in register constants definitions.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240708151801.11592-4-kabel@kernel.org
There is one occurrence of suffix _MSK in register constants, others
have _MASK instead. Change the one to _MASK for consistency.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240708151801.11592-3-kabel@kernel.org
Some register constants have the _OFFS suffix and some do not. Drop it
to be more consistent.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/all/20240708151801.11592-2-kabel@kernel.org
The place for link training is in the encoder's atomic_enable
helper. Remove all related tests from other helper ASTDP functions;
especially ast_astdp_is_connected(), which tests HPD status.
DP link training is controlled by the firmware. A status flag reports
success or failure. The process can be fragile on Aspeed hardware. Moving
the test from connector detection to the atomic_enable allows for several
retries and a longer timeout.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-5-tzimmermann@suse.de
The overall control flow of the driver ensures that it never reads
EDID or sets display state on unconnected outputs. Therefore remove
all tests for Hot Plug Detection from these helpers. Also rename
the register constants.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-4-tzimmermann@suse.de
Test for running ASTDP firmware during probe. Do not bother testing
this later. We cannot do much anyway if the firmware fails. Do not
initialize the ASTDP conenctor if the test fails during device probing.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Shixiong Ou <oushixiong@kylinos.cn>
Tested-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-3-tzimmermann@suse.de
In 782f8906f8 the freeing of kfence objects was moved from deep
inside do_slab_free to the wrapper functions outside. This is a nice
change, but unfortunately it missed one spot in __kmem_cache_free_bulk.
This results in a crash like this:
BUG skbuff_head_cache (Tainted: G S B E ): Padding overwritten. 0xffff88907fea0f00-0xffff88907fea0fff @offset=3840
slab_err (mm/slub.c:1129)
free_to_partial_list (mm/slub.c:? mm/slub.c:4036)
slab_pad_check (mm/slub.c:864 mm/slub.c:1290)
check_slab (mm/slub.c:?)
free_to_partial_list (mm/slub.c:3171 mm/slub.c:4036)
kmem_cache_alloc_bulk (mm/slub.c:? mm/slub.c:4495 mm/slub.c:4586 mm/slub.c:4635)
napi_build_skb (net/core/skbuff.c:348 net/core/skbuff.c:527 net/core/skbuff.c:549)
All the other callers to do_slab_free appear to be ok.
Add a kfence_free check in __kmem_cache_free_bulk to avoid the crash.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 782f8906f8 ("mm/slub: free KFENCE objects in slab_free_hook()")
Cc: stable@kernel.org
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Currently the Jacuzzi dtsi file redeclares the full DSI endpoint tree
from the DSI controller just to replace the remote endpoint. This is
not necessary since the local endpoint already has a label that can be
referenced. This will also confusion when the inherited layout is
changed.
Replace the redeclared DSI endpoint tree with a label reference.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240625095705.3474713-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
