If PCIe supports atomics, configure register to prevent DF from
breaking atomics in separate load/store operations.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 666f14cab2)
We seem to have a case where SDMA will sometimes miss a doorbell
if GFX is entering the powergating state when the doorbell comes in.
To workaround this, we can update the wptr via MMIO, however,
this is only safe because we disallow gfxoff in begin_ring() for
SDMA 5.2 and then allow it again in end_ring().
Enable this workaround while we are root causing the issue with
the HW team.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/3440
Tested-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
(cherry picked from commit f2ac526349)
- Simplification across subsystem using cleanup.h
- Support for debugfs to read/write commands
- Few Intel and Qualcomm driver updates
-----BEGIN PGP SIGNATURE-----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=FNSV
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Simplification across subsystem using cleanup.h
- Support for debugfs to read/write commands
- Few Intel and Qualcomm driver updates
* tag 'soundwire-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: debugfs: simplify with cleanup.h
soundwire: cadence: simplify with cleanup.h
soundwire: intel_ace2x: simplify with cleanup.h
soundwire: intel_ace2x: simplify return path in hw_params
soundwire: intel: simplify with cleanup.h
soundwire: intel: simplify return path in hw_params
soundwire: amd_init: simplify with cleanup.h
soundwire: amd: simplify with cleanup.h
soundwire: amd: simplify return path in hw_params
soundwire: intel_auxdevice: start the bus at default frequency
soundwire: intel_auxdevice: add cs42l43 codec to wake_capable_list
drivers:soundwire: qcom: cleanup port maask calculations
soundwire: bus: simplify by using local slave->prop
soundwire: generic_bandwidth_allocation: change port_bo parameter to pointer
soundwire: Intel: clarify Copyright information
soundwire: intel_ace2.x: add AC timing extensions for PantherLake
soundwire: bus: add stream refcount
soundwire: debugfs: add interface to read/write commands
New support:
- New dmaengine_prep_peripheral_dma_vec() to support transfers using dma
vectors and documentation and user in AXI dma
- STMicro STM32 DMA3 support and new capabilities of cyclic dma
Updates:
- Yaml conversion for Freescale imx dma and qdma bindings, sprd sc9860 dma
binding
- Altera msgdma updates for descriptor management
-----BEGIN PGP SIGNATURE-----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=h0hh
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- New dmaengine_prep_peripheral_dma_vec() to support transfers using
dma vectors and documentation and user in AXI dma
- STMicro STM32 DMA3 support and new capabilities of cyclic dma
Updates:
- Yaml conversion for Freescale imx dma and qdma bindings,
sprd sc9860 dma binding
- Altera msgdma updates for descriptor management"
* tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits)
dt-bindings: fsl-qdma: fix interrupts 'if' check logic
dt-bindings: dma: sprd,sc9860-dma: convert to YAML
dmaengine: fsl-dpaa2-qdma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: add missing MODULE_DESCRIPTION() macros
dmaengine: ti: cppi41: add missing MODULE_DESCRIPTION() macro
dmaengine: virt-dma: add missing MODULE_DESCRIPTION() macro
dmaengine: ti: k3-udma: Fix BCHAN count with UHC and HC channels
dmaengine: sh: rz-dmac: Fix lockdep assert warning
dmaengine: qcom: gpi: clean up the IRQ disable/enable in gpi_reset_chan()
dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM
dmaengine: qcom: gpi: remove unused struct 'reg_info'
dmaengine: moxart-dma: remove unused struct 'moxart_filter_data'
dt-bindings: fsl-qdma: Convert to yaml format
dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan
dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated
dmaengine: stm32-dma3: defer channel registration to specify channel name
dmaengine: add channel device name to channel registration
dmaengine: stm32-dma3: improve residue granularity
dmaengine: stm32-dma3: add device_pause and device_resume ops
dmaengine: stm32-dma3: add DMA_MEMCPY capability
...
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
When creating KFD user compute queue, check if queue eop buffer size,
cwsr area size, ctl stack size equal to the size of KFD node
properities.
Check the entire cwsr area which may split into multiple svm ranges
aligned to granularity boundary.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the queue eop buffer size, cwsr area size, ctl stack size
calculation from Thunk, store the value to KFD node properties.
Those will be used to validate queue eop buffer size, cwsr area size,
ctl stack size when creating KFD user compute queue.
Those will be exposed to user space via sysfs KFD node properties, to
remove the duplicate calculation code from Thunk.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Page table of compute VM in the VRAM will lost after gpu reset.
VRAM won't be restored since compute VM has no shadows.
[How]
Use higher 32-bit of vm->generation to record a vram_lost_counter.
Reset the VM state machine when vm->genertaion is not equal to
the new generation token.
v2: Check vm->generation instead of calling drm_sched_entity_error
in amdgpu_vm_validate.
v3: Use new generation token instead of vram_lost_counter for check.
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a null check for the set_output_gamma function pointer
in the dcn30_set_output_transfer_func function. Previously,
set_output_gamma was being checked for nullity at line 386, but then it
was being dereferenced without any nullity check at line 401. This
could potentially lead to a null pointer dereference error if
set_output_gamma is indeed null.
To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a nullity check for
set_output_gamma before the call to set_output_gamma at line 401. If
set_output_gamma is null, we log an error message and do not call the
function.
This fix prevents a potential null pointer dereference error.
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:401 dcn30_set_output_transfer_func()
error: we previously assumed 'mpc->funcs->set_output_gamma' could be null (see line 386)
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c
373 bool dcn30_set_output_transfer_func(struct dc *dc,
374 struct pipe_ctx *pipe_ctx,
375 const struct dc_stream_state *stream)
376 {
377 int mpcc_id = pipe_ctx->plane_res.hubp->inst;
378 struct mpc *mpc = pipe_ctx->stream_res.opp->ctx->dc->res_pool->mpc;
379 const struct pwl_params *params = NULL;
380 bool ret = false;
381
382 /* program OGAM or 3DLUT only for the top pipe*/
383 if (pipe_ctx->top_pipe == NULL) {
384 /*program rmu shaper and 3dlut in MPC*/
385 ret = dcn30_set_mpc_shaper_3dlut(pipe_ctx, stream);
386 if (ret == false && mpc->funcs->set_output_gamma) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If this is NULL
387 if (stream->out_transfer_func.type == TF_TYPE_HWPWL)
388 params = &stream->out_transfer_func.pwl;
389 else if (pipe_ctx->stream->out_transfer_func.type ==
390 TF_TYPE_DISTRIBUTED_POINTS &&
391 cm3_helper_translate_curve_to_hw_format(
392 &stream->out_transfer_func,
393 &mpc->blender_params, false))
394 params = &mpc->blender_params;
395 /* there are no ROM LUTs in OUTGAM */
396 if (stream->out_transfer_func.type == TF_TYPE_PREDEFINED)
397 BREAK_TO_DEBUGGER();
398 }
399 }
400
--> 401 mpc->funcs->set_output_gamma(mpc, mpcc_id, params);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Then it will crash
402 return ret;
403 }
Fixes: d99f13878d ("drm/amd/display: Add DCN3 HWSEQ")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ensure update queue new ring buffer is mapped on GPU with correct size.
Decrease queue old ring_bo queue_refcount and increase new ring_bo
queue_refcount.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Queue CWSR area maybe registered to GPU as svm memory, create queue to
ensure svm mapped to GPU with KFD_IOCTL_SVM_FLAG_GPU_ALWAYS_MAPPED flag.
Add queue_refcount to struct svm_range, to track queue CWSR area usage.
Because unmap mmu notifier callback return value is ignored, if
application unmap the CWSR area while queue is active, pr_warn message
in dmesg log. To be safe, evict user queue.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to a bug in earlier userspaces, a transition table may be present
even when the dfa is not. Commit 7572fea31e
("apparmor: convert fperm lookup to use accept as an index") made the
verification check more rigourous regressing old userspaces with
the bug. For compatibility reasons allow the orphaned transition table
during unpack and discard.
Fixes: 7572fea31e ("apparmor: convert fperm lookup to use accept as an index")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
If the label is not stale (which is the common case), the fact that the
passed file object holds a reference can be leverged to avoid the
ref/unref cycle. Doing so reduces performance impact of apparmor on
parallel open() invocations.
When benchmarking on a 24-core vm using will-it-scale's open1_process
("Separate file open"), the results are (ops/s):
before: 6092196
after: 8309726 (+36%)
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in security/apparmor/apparmor_policy_unpack_test.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
A "nosymfollow" flag was added in commit
dab741e0e0 ("Add a "nosymfollow" mount option.")
While we don't need to implement any special logic on
the AppArmor kernel side to handle it, we should provide
user with a correct list of mount flags in audit logs.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
-----BEGIN PGP SIGNATURE-----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=P8aI
-----END PGP SIGNATURE-----
Merge tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This adds getrandom() support to the vDSO.
First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which
lets the kernel zero out pages anytime under memory pressure, which
enables allocating memory that never gets swapped to disk but also
doesn't count as being mlocked.
Then, the vDSO implementation of getrandom() is introduced in a
generic manner and hooked into random.c.
Next, this is implemented on x86. (Also, though it's not ready for
this pull, somebody has begun an arm64 implementation already)
Finally, two vDSO selftests are added.
There are also two housekeeping cleanup commits"
* tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
MAINTAINERS: add random.h headers to RNG subsection
random: note that RNDGETPOOL was removed in 2.6.9-rc2
selftests/vDSO: add tests for vgetrandom
x86: vdso: Wire up getrandom() vDSO implementation
random: introduce generic vDSO getrandom() implementation
mm: add MAP_DROPPABLE for designating always lazily freeable mappings
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZqDFUwAKCRCRxhvAZXjc
omD6APwJKlepwDYlu5XZptI6/1kmai6SqaYnifTX1+ELR/rQQAD/Z37aho42v2JZ
NYr+KFj02vj7ryKA5OWuSD8cw+6GlwQ=
=dfob
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.11-rc1.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"VFS:
- The new 64bit mount ids start after the old mount id, i.e., at the
first non-32 bit value. However, we started counting one id too
late and thus lost 4294967296 as the first valid id. Fix that.
- Update a few comments on some vfs_*() creation helpers.
- Move copying of the xattr name out from the locks required to start
a filesystem write.
- Extend the filelock lock UAF fix to the compat code as well.
- Now that we added the ability to look up an inode under RCU it's
possible that lockless hash lookup can find and lock an inode after
it gets I_FREEING set. It then waits until inode teardown in
evict() is finished.
The flag however is still set after evict() has woken up all
waiters. If the inode lock is taken late enough on the waiting side
after hash removal and wakeup happened the waiting thread will
never be woken.
Before RCU based lookup this was synchronized via the
inode_hash_lock. But since unhashing requires the inode lock as
well we can check whether the inode is unhashed while holding inode
lock even without holding inode_hash_lock.
pidfd:
- The nsproxy structure contains nearly all of the namespaces
associated with a task. When a namespace type isn't supported
nsproxy might contain a NULL pointer or always point to the initial
namespace type. The logic isn't consistent. So when deriving
namespace fds we need to ensure that the namespace type is
supported.
First, so that we don't risk dereferncing NULL pointers. The
correct bigger fix would be to change all namespaces to always set
a valid namespace pointer in struct nsproxy independent of whether
or not it is compiled in. But that requires quite a few changes.
Second, so that we don't allow deriving namespace fds when the
namespace type doesn't exist and thus when they couldn't also be
derived via /proc/self/ns/.
- Add missing selftests for the new pidfd ioctls to derive namespace
fds. This simply extends the already existing testsuite.
netfs:
- Fix debug logging and fix kconfig variable name so it actually
works.
- Fix writeback that goes both to the server and cache. The streams
are only activated once a subreq is added. When a server write
happens the subreq doesn't need to have finished by the time the
cache write is started. If the server write has already finished by
the time the cache write is about to start the cache write will
operate on a folio that might already have been reused. Fix this by
preactivating the cache write.
- Limit cachefiles subreq size for cache writes to MAX_RW_COUNT"
* tag 'vfs-6.11-rc1.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
inode: clarify what's locked
vfs: Fix potential circular locking through setxattr() and removexattr()
filelock: Fix fcntl/close race recovery compat path
fs: use all available ids
cachefiles: Set the max subreq size for cache writes to MAX_RW_COUNT
netfs: Fix writeback that needs to go to both server and cache
pidfs: add selftests for new namespace ioctls
pidfs: handle kernels without namespaces cleanly
pidfs: when time ns disabled add check for ioctl
vfs: correct the comments of vfs_*() helpers
vfs: handle __wait_on_freeing_inode() and evict() race
netfs: Rename CONFIG_FSCACHE_DEBUG to CONFIG_NETFS_DEBUG
netfs: Revert "netfs: Switch debug logging to pr_debug()"
Since commit 08ac454e25 ("libbpf: Auto-attach struct_ops BPF maps in
BPF skeleton"), libbpf automatically calls bpf_map__attach_struct_ops()
on every struct_ops it sees in the bpf object. The problem is that
our test bpf object has many of them but only one should be manually
loaded at a time, or we end up locking the syscall.
Link: https://patch.msgid.link/20240723-fix-6-11-bpf-v1-2-b9d770346784@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Since commit f56f4d541e ("bpf: helpers: fix bpf_wq_set_callback_impl
signature"), the API for bpf_wq changed a bit.
We need to update the selftests/hid code to reflect that or the
bpf program will not load.
Link: https://patch.msgid.link/20240723-fix-6-11-bpf-v1-1-b9d770346784@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Commit e3ec0fe944 ("hostfs: Convert hostfs_read_folio() to use a
folio") simplified hostfs_read_folio(), but in the process of converting
to using folios natively also mis-used the folio_zero_tail() function
due to the very confusing API of that function.
Very arguably it's folio_zero_tail() API itself that is buggy, since it
would make more sense (and the documentation kind of implies) that the
third argument would be the pointer to the beginning of the folio
buffer.
But no, the third argument to folio_zero_tail() is where we should start
zeroing the tail (even if we already also pass in the offset separately
as the second argument).
So fix the hostfs caller, and we can leave any folio_zero_tail() sanity
cleanup for later.
Reported-and-tested-by: Maciej Żenczykowski <maze@google.com>
Fixes: e3ec0fe944 ("hostfs: Convert hostfs_read_folio() to use a folio")
Link: https://lore.kernel.org/all/CANP3RGceNzwdb7w=vPf5=7BCid5HVQDmz1K5kC9JG42+HVAh_g@mail.gmail.com/
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's not always safe to call XE_WA() in the driver initialization. Add a
xe_gt_assert() so this doesn't go unnoticed.
While at it, fix typo in kernel-doc about OOB workarounds.
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722160815.4085605-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Adjust quirks for 0x3a20, 0x3a30, 0x3a50 to match the 0x3a60. This
set has now been confirmed to work with this patch.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Fixes: 811dd426a9 ("ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240723011224.115579-1-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In ublk_ctrl_uring_cmd(), ioctl command NR should be used for
matching _IOC_NR(cmd_op).
Fix it by adding one private macro, and this way is clean.
Fixes: 13fe8e6825 ("ublk: add UBLK_CMD_DEL_DEV_ASYNC")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240724143311.2646330-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a process' cred struct is replaced, this _almost_ always invokes
the cred_prepare LSM hook; but in one special case (when
KEYCTL_SESSION_TO_PARENT updates the parent's credentials), the
cred_transfer LSM hook is used instead. Landlock only implements the
cred_prepare hook, not cred_transfer, so KEYCTL_SESSION_TO_PARENT causes
all information on Landlock restrictions to be lost.
This basically means that a process with the ability to use the fork()
and keyctl() syscalls can get rid of all Landlock restrictions on
itself.
Fix it by adding a cred_transfer hook that does the same thing as the
existing cred_prepare hook. (Implemented by having hook_cred_prepare()
call hook_cred_transfer() so that the two functions are less likely to
accidentally diverge in the future.)
Cc: stable@kernel.org
Fixes: 385975dca5 ("landlock: Set up the security framework and manage credentials")
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240724-landlock-houdini-fix-v1-1-df89a4560ca3@google.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
After adding ACPI support to populate_cache_leaves(), RISC-V can build
cacheinfo through the ACPI PPTT table, thus enabling the ACPI_PPTT
configuration.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20240617131425.7526-3-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Before cacheinfo can be built correctly, we need to initialize level
and type. Since RISC-V currently does not have a register group that
describes cache-related attributes like ARM64, we cannot obtain them
directly, so now we obtain cache leaves from the ACPI PPTT table
(acpi_get_cache_info()) and set the cache type through split_levels.
Suggested-by: Jeremy Linton <jeremy.linton@arm.com>
Suggested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20240617131425.7526-2-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ci_leaf_init() is a declared static function. The implementation of the
function body and the caller do not use the parameter (struct device_node
*node) input parameter, so remove it.
Fixes: 6a24915145 ("Revert "riscv: Set more data to cacheinfo"")
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240617131425.7526-1-cuiyunhui@bytedance.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The ACPI SPCR code has been used to enable console output for ARM64 and
X86. The same code can be reused for RISC-V. Furthermore, SPCR table is
mandated for headless system as outlined in the RISC-V BRS
Specification, chapter 6.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20240502073751.102093-2-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
netconsole has no maintainer, and Breno has been working on
improving it consistently for some time. So I think we found
the maintainer :)
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update my email address, clarify support status, and delete the
web site that hasn't been used in a long time.
Signed-off-by: Jay Vosburgh <j.vosburgh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct nexthop_grp contains two reserved fields that are not initialized by
nla_put_nh_group(), and carry garbage. This can be observed e.g. with
strace (edited for clarity):
# ip nexthop add id 1 dev lo
# ip nexthop add id 101 group 1
# strace -e recvmsg ip nexthop get id 101
...
recvmsg(... [{nla_len=12, nla_type=NHA_GROUP},
[{id=1, weight=0, resvd1=0x69, resvd2=0x67}]] ...) = 52
The fields are reserved and therefore not currently used. But as they are, they
leak kernel memory, and the fact they are not just zero complicates repurposing
of the fields for new ends. Initialize the full structure.
Fixes: 430a049190 ("nexthop: Add support for nexthop groups")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The perfect_match parameter of the update_vlan_hash operation is __le16,
and is correctly converted from host byte-order in the lone caller,
stmmac_vlan_update().
However, the implementations of this caller, dwxgmac2_update_vlan_hash()
and dwxgmac2_update_vlan_hash(), both treat this parameter as host byte
order, using the following pattern:
u32 value = ...
...
writel(value | perfect_match, ...);
This is not correct because both:
1) value is host byte order; and
2) writel expects a host byte order value as it's first argument
I believe that this will break on big endian systems. And I expect it
has gone unnoticed by only being exercised on little endian systems.
The approach taken by this patch is to update the callback, and it's
caller to simply use a host byte order value.
Flagged by Sparse.
Compile tested only.
Fixes: c7ab0b8088 ("net: stmmac: Fallback to VLAN Perfect filtering if HASH is not available")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a difference in how io_queue_sqe and io_wq_submit_work treat
error codes they get from io_issue_sqe. The first one fails anything
unknown but latter only fails when the code is negative.
It doesn't make sense to have this discrepancy, align them to the
io_queue_sqe behaviour.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c550e152bf4a290187f91a4322ddcb5d6d1f2c73.1721819383.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't have to return error code from an op handler back to core
io_uring, so once io_uring_cmd() sets the results and handles errors we
can juts return IOU_OK and simplify the code.
Note, only valid with e0b23d9953 ("io_uring: optimise ltimeout for
inline execution"), there was a problem with iopoll before.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8eae2be5b2a49236cd5f1dadbd1aa5730e9e2d4f.1721819383.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring_cancel_generic() should retry if any state changes like a
request is completed, however in case of a task exit it only goes for
another loop and avoids schedule() if any tracked (i.e. REQ_F_INFLIGHT)
request got completed.
Let's assume we have a non-tracked request executing in iowq and a
tracked request linked to it. Let's also assume
io_uring_cancel_generic() fails to find and cancel the request, i.e.
via io_run_local_work(), which may happen as io-wq has gaps.
Next, the request logically completes, io-wq still hold a ref but queues
it for completion via tw, which happens in
io_uring_try_cancel_requests(). After, right before prepare_to_wait()
io-wq puts the request, grabs the linked one and tries executes it, e.g.
arms polling. Finally the cancellation loop calls prepare_to_wait(),
there are no tw to run, no tracked request was completed, so the
tctx_inflight() check passes and the task is put to indefinite sleep.
Cc: stable@vger.kernel.org
Fixes: 3f48cf18f8 ("io_uring: unify files and task cancel")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/acac7311f4e02ce3c43293f8f1fda9c705d158f1.1721819383.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The "targets:" is duplicated in another line, remove the one with less
targets.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20240613153053.3835-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
