Host inode and its' xattr will be written on disk after initializing
security when creating symlink or dev, then the host inode and its
dentry will be written again in ubifs_jnl_update.
There is no need to write inode data in the security initialization
pass, just move the ui->data initialization after initializing
security.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The tmpfile could be added into orphan list twice, first time is
creation, the second time is removing after it is linked. The orphan
entry could be added twice for tmpfile if following sequence is
satisfied:
ubifs_tmpfile
ubifs_jnl_update
ubifs_add_orphan // first time to add orphan entry
P1 P2
ubifs_link do_commit
ubifs_orphan_start_commit
orphan->cmt = 1
ubifs_delete_orphan
orphan_delete
if (orph->cmt)
orph->del = 1; // orphan entry is not deleted from tree
return
ubifs_unlink
ubifs_jnl_update
ubifs_add_orphan
orphan_add // found old orphan entry, second time to add orphan entry
ubifs_err(c, "orphaned twice")
return -EINVAL // unlink failed!
ubifs_orphan_end_commit
erase_deleted // delete old orphan entry
rb_erase(&orphan->rb, &c->orph_tree)
Fix it by removing orphan entry from orphan tree in advance, rather than
remove it from orphan tree in committing process.
Fixes: 32fe905c17 ("ubifs: Fix O_TMPFILE corner case in ubifs_link()")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218672
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
UBIFS will do commit at the end of mounting process(rw mode), dead
orphans(added by insert_dead_orphan in replaying orphan) are deleted
by ubifs_orphan_end_commit(). The only reason why dead orphans are
added into orphan list is that old orpans may be lost when powercut
happens in ubifs_orphan_end_commit():
ubifs_orphan_end_commit // TNC(updated by orphans) is not written yet
if (c->cmt_orphans != 0)
commit_orphans
consolidate // traverse orphan list
write_orph_nodes // rewrite all orphans by ubifs_leb_change
// If dead orphans are not in list, they will be lost when powercut
// happens, then TNC won't be updated by old orphans in next mounting.
Luckily, the condition 'c->cmt_orphans != 0' will never be true in
mounting process, there can't be new orphans added into orphan list
before mounting returned, but commit will be done at the end of mounting.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This reverts commit 6379b44cdc. Commit
1e022216dc ("ubifs: ubifs_symlink: Fix memleak of inode->i_link in
error path") is applied again in commit 6379b44cdc ("ubifs:
ubifs_symlink: Fix memleak of inode->i_link in error path"), which
changed ubifs_mknod (It won't become a real problem). Just revert it.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Now, the entire inode with its' xattrs are removed while replaying
orphan nodes. There is no need to add xattr inodes into orphan area,
which is based on the fact that xattr entries won't be cleared from
disk before deleting xattr inodes, in another words, current logic
can make sure that xattr inode be deleted in any cases even UBIFS not
record xattr inode into orphan area.
Let's looking for possible paths that could clear xattr entries from
disk but leave the xattr inode on TNC:
1. unlink/tmpfile -> ubifs_jnl_update: inode(nlink=0) is written
into bud LEB and added into orphan list, then:
a. powercut: ubifs_tnc_remove_ino(xattr entry/inode can be found
from TNC and being deleted) is invoked in replaying journal.
b. commit + powercut: inode is written into orphan area, and
ubifs_tnc_remove_ino is invoked in replaying orphan nodes.
c. evicting + powercut: xattr inode(nlink=0) is written on disk,
xattr is removed from TNC, gc could clear xattr entries from
disk. ubifs_tnc_remove_ino will apply on inode and xattr inode
in replaying journal, so lost xattr entries will make no
influence.
d. evicting + commit + powercut: xattr inode/entry are removed from
index tree(on disk) by ubifs_jnl_write_inode, xattr inode is
cleared from orphan area by ubifs_jnl_write_inode + commit.
e. commit + evicting + powercut: inode is written into orphan area,
then equivalent to c.
2. remove xattr -> ubifs_jnl_delete_xattr: xattr entry(inum=0) and
xattr inode(nlink=0) is written into bud LEB, xattr entry/inode are
removed from TNC, then:
a. powercut: gc could clear xattr entries from disk, which won't
affect deleting xattr entry from TNC. ubifs_tnc_remove_ino will
apply on xattr inode in replaying journal, ubifs_tnc_remove_nm
will apply on xattr entry in replaying journal.
b. commit + powercut: xattr entry/inode are removed from index tree
(on disk).
Tracking xattr inode in orphan list is imported by commit 988bec4131
("ubifs: orphan: Handle xattrs like files"), it aims to fix the similar
problem described in commit 7959cf3a75 ("ubifs: journal: Handle
xattrs like files"). Actually, the problem only exist in journal case
but not the orphan case. So, we can remove the orphan tracking for xattr
inodes.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
When powercut happens after deleting file, the xattr inode could be
alone existing in TNC but its' xattr entry cannot be found in TNC.
File inode and xattr inode are added into orphan list after deleting
file, file inode's nlink is 0 but xattr inode's nlink is not 0 (PS:
zero nlink xattr inode is written on disk in evicting process by
ubifs_jnl_write_inode). So, following process could happen:
1. touch file
2. setxattr(file)
3. unlink file
// inode(nlink=0), xattr inode(nlink=1) are added into orphan list
4. commit
// write inode inum and xattr inum into orphan area
5. powercut
6. mount
do_kill_orphans
// inode(nlink=0) is deleted from TNC by ubifs_tnc_remove_range,
// xattr entry is deleted too.
// xattr inode(nlink=1) is not deleted from TNC
Finally we could see following error while debugging UBIFS:
UBIFS error (ubi0:0 pid 1093): dbg_check_filesystem [ubifs]: inode 66
nlink is 1, but calculated nlink is 0
UBIFS (ubi0:0): dump of the inode 66 sitting in LEB 12:2128
node_type 0 (inode node)
group_type 1 (in node group)
len 197
key (66, inode)
size 37
nlink 1
flags 0x20
xattr_cnt 0
xattr_size 0
xattr_names 0
data len 37
Fix it by removing entire inode with it's xattrs while replaying orphan,
just replace function ubifs_tnc_remove_range by ubifs_tnc_remove_ino.
Fixes: ee1438ce5d ("ubifs: Check link count of inodes when killing orphans.")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218661
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
-----BEGIN PGP SIGNATURE-----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=gtsF
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Fix a regression in extent map shrinker behaviour.
In the past weeks we got reports from users that there are huge
latency spikes or freezes. This was bisected to newly added shrinker
of extent maps (it was added to fix a build up of the structures in
memory).
I'm assuming that the freezes would happen to many users after release
so I'd like to get it merged now so it's in 6.10. Although the diff
size is not small the changes are relatively straightforward, the
reporters verified the fixes and we did testing on our side.
The fixes:
- adjust behaviour under memory pressure and check lock or scheduling
conditions, bail out if needed
- synchronize tracking of the scanning progress so inode ranges are
not skipped or work duplicated
- do a delayed iput when scanning a root so evicting an inode does
not slow things down in case of lots of dirty data, also fix
lockdep warning, a deadlock could happen when writing the dirty
data would need to start a transaction"
* tag 'for-6.10-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: avoid races when tracking progress for extent map shrinking
btrfs: stop extent map shrinker if reschedule is needed
btrfs: use delayed iput during extent map shrinking
Because there was no way to directly dispatch to the local DSQ of a remote
CPU from ops.enqueue(), scx_qmap skipped looking for an idle CPU on !wakeup
enqueues. This restriction was removed and sched_ext now allows
SCX_DSQ_LOCAL_ON verdicts for direct dispatches.
Factor out pick_direct_dispatch_cpu() from ops.select_cpu() and use it to
direct dispatch from ops.enqueue() on !wakeup enqueues.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
Cc: Changwoo Min <changwoo@igalia.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
In ops.dispatch(), SCX_DSQ_LOCAL_ON can be used to dispatch the task to the
local DSQ of any CPU. However, during direct dispatch from ops.select_cpu()
and ops.enqueue(), this isn't allowed. This is because dispatching to the
local DSQ of a remote CPU requires locking both the task's current and new
rq's and such double locking can't be done directly from ops.enqueue().
While waking up a task, as ops.select_cpu() can pick any CPU and both
ops.select_cpu() and ops.enqueue() can use SCX_DSQ_LOCAL as the dispatch
target to dispatch to the DSQ of the picked CPU, the BPF scheduler can still
do whatever it wants to do. However, while a task is being enqueued for a
different reason, e.g. after its slice expiration, only ops.enqueue() is
called and there's no way for the BPF scheduler to directly dispatch to the
local DSQ of a remote CPU. This gap in API forces schedulers into
work-arounds which are not straightforward or optimal such as skipping
direct dispatches in such cases.
Implement deferred enqueueing to allow directly dispatching to the local DSQ
of a remote CPU from ops.select_cpu() and ops.enqueue(). Such tasks are
temporarily queued on rq->scx.ddsp_deferred_locals. When the rq lock can be
safely released, the tasks are taken off the list and queued on the target
local DSQs using dispatch_to_local_dsq().
v2: - Add missing return after queue_balance_callback() in
schedule_deferred(). (David).
- dispatch_to_local_dsq() now assumes that @rq is locked but unpinned
and thus no longer takes @rf. Updated accordingly.
- UP build warning fix.
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Andrea Righi <righi.andrea@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
Cc: Changwoo Min <changwoo@igalia.com>
SCX_RQ_BALANCING is used to mark that the rq is currently in balance().
Rename it to SCX_RQ_IN_BALANCE and add SCX_RQ_IN_WAKEUP which marks whether
the rq is currently enqueueing for a wakeup. This will be used to implement
direct dispatching to local DSQ of another CPU.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
sched_ext often needs to migrate tasks across CPUs right before execution
and thus uses the balance path to dispatch tasks from the BPF scheduler.
balance_scx() is called with rq locked and pinned but is passed @rf and thus
allowed to unpin and unlock. Currently, @rf is passed down the call stack so
the rq lock is unpinned just when double locking is needed.
This creates unnecessary complications such as having to explicitly
manipulate lock pinning for core scheduling. We also want to use
dispatch_to_local_dsq_lock() from other paths which are called with rq
locked but unpinned.
rq lock handling in the dispatch path is straightforward outside the
migration implementation and extending the pinning protection down the
callstack doesn't add enough meaningful extra protection to justify the
extra complexity.
Unpin and repin rq lock from the outer balance_scx() and drop @rf passing
and lock pinning handling from the inner functions. UP is updated to call
balance_one() instead of balance_scx() to avoid adding NULL @rf handling to
balance_scx(). AS this makes balance_scx() unused in UP, it's put inside a
CONFIG_SMP block.
No functional changes intended outside of lock annotation updates.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Righi <righi.andrea@gmail.com>
task_linked_on_dsq() exists as a helper because it used to test both the
rbtree and list nodes. It now only tests the list node and the list node
will soon be used for something else too. The helper doesn't improve
anything materially and the naming will become confusing. Open-code the list
node testing and remove task_linked_on_dsq()
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Move struct balance_callback definition upward so that it's visible to
class-specific rq struct definitions. This will be used to embed a struct
balance_callback in struct scx_rq.
No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
There are devices in the wild with non-updatable firmware coming with
ACPI tables with rejected compatibles, e.g. "ltr,ltrf216a". Linux
kernel still supports this device via ACPI PRP0001, however the
compatible was never accepted to bindings.
There are also several early PowerPC or SPARC platforms using
compatibles for their OpenFirmware, but without in-tree DTS. Often the
legacy compatible is not correct in terms of current Devicetree
specification, e.g. missing vendor prefix.
Finally there are also Linux-specific tools and test code with
compatibles.
Add a schema covering above cases purely to satisfy the DT schema and
scripts/checkpatch.pl checks for undocumented compatibles. For
ltr,ltrf216a this also documents the consensus: compatible is allowed
only via ACPI PRP0001, but not bindings.
Link: https://lore.kernel.org/all/20240705095047.90558-1-marex@denx.de/
Link: https://lore.kernel.org/lkml/20220731173446.7400bfa8@jic23-huawei/T/#me55be502302d70424a85368c2645c89f860b7b40
Cc: Marek Vasut <marex@denx.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240712121146.90942-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The use of do_div() in ubi_nvmem_reg_read() makes calling it on
32-bit machines rather expensive. Since the 'from' variable is
known to be a 32-bit quantity, it is clearly never needed and
can be optimized into a regular division operation.
Fixes: b8a77b9a5f ("mtd: ubi: fix NVMEM over UBI volumes on 32-bit systems")
Fixes: 3ce485803d ("mtd: ubi: provide NVMEM layer over UBI volumes")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the ubi_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
In case of a memory allocation failure in the volumes loop we can only
process the already allocated scan_eba and fm_eba array elements on the
error path - others are still uninitialized.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 00abf30415 ("UBI: Add self_check_eba()")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
marked for stable and two kernel-doc fixups.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmaRXKYTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi4l2B/9a9jLU/CJwNdvq2wkMn7wis9QlXaz9
shIAefqvCY92pCAbsyHjbG6OnY5hU/eI1l64pnzws8aTtAt4kuhnTwQAMjUIPbjg
6ji1IkDu5Z9csiVxZ0R4KAzjcEOAxnv/TeGMu1FgpRwTvKXqThotHt3N/pm6Nj6x
iJlxNpDBgUXjjdOc2Kd6kTVZ2CJwOhaTjMyXphxNbhCIO+2ULHWf0VZecTG4oKbO
C7C4fJe+gsJl0GsjzlbTwrj50WTSsKP+QBc6cxutFIaUCO52wgf7k5EBs+5JXb7s
mkioLXxS+9Iz58OIrtbW6vMVp35MDSSc8NNRd3uUzsMwIYiU9Uvg38+j
=em4x
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.10-rc8' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A fix for a possible use-after-free following "rbd unmap" or "umount"
marked for stable and two kernel-doc fixups"
* tag 'ceph-for-6.10-rc8' of https://github.com/ceph/ceph-client:
libceph: fix crush_choose_firstn() kernel-doc warnings
libceph: suppress crush_choose_indep() kernel-doc warnings
libceph: fix race between delayed_work() and ceph_monc_stop()
nouveau_sched_init() uses the function drm_sched_init(). The latter
function has parameters called "hang_limit" and "timeout" in its API
documentation.
nouveau_sched_init(), however, defines a variable called
"job_hang_limit" which is passed to drm_sched_init()'s "timeout"
parameter. The actual "hang_limit" parameter is directly set to 0.
Rename "job_hang_limit" to "timeout".
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240712062618.8057-1-pstanner@redhat.com
"data" actually refers to a file_lease and not a file_lock. Both structs
have their file_lock_core as the first field though, so this bug should
be harmless without struct randomization in play.
Reported-by: Florian Evers <florian-evers@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219008
Fixes: 05580bbfc6 ("nfsd: adapt to breakup of struct file_lock")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Florian Evers <florian-evers@gmx.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This is a bug found when implementing pretty-printing for the
landlock_add_rule system call, I decided to send this patch separately
because this is a serious bug that should be fixed fast.
I wrote a test program to do landlock_add_rule syscall in a loop,
yet perf trace -e landlock_add_rule freezes, giving no output.
This bug is introduced by the false understanding of the variable "key"
below:
```
for (key = 0; key < trace->sctbl->syscalls.nr_entries; ++key) {
struct syscall *sc = trace__syscall_info(trace, NULL, key);
...
}
```
The code above seems right at the beginning, but when looking at
syscalltbl.c, I found these lines:
```
for (i = 0; i <= syscalltbl_native_max_id; ++i)
if (syscalltbl_native[i])
++nr_entries;
entries = tbl->syscalls.entries = malloc(sizeof(struct syscall) * nr_entries);
...
for (i = 0, j = 0; i <= syscalltbl_native_max_id; ++i) {
if (syscalltbl_native[i]) {
entries[j].name = syscalltbl_native[i];
entries[j].id = i;
++j;
}
}
```
meaning the key is merely an index to traverse the syscall table,
instead of the actual syscall id for this particular syscall.
So if one uses key to do trace__syscall_info(trace, NULL, key), because
key only goes up to trace->sctbl->syscalls.nr_entries, for example, on
my X86_64 machine, this number is 373, it will end up neglecting all
the rest of the syscall, in my case, everything after `rseq`, because
the traversal will stop at 373, and `rseq` is the last syscall whose id
is lower than 373
in tools/perf/arch/x86/include/generated/asm/syscalls_64.c:
```
...
[334] = "rseq",
[424] = "pidfd_send_signal",
...
```
The reason why the key is scrambled but perf trace works well is that
key is used in trace__syscall_info(trace, NULL, key) to do
trace->syscalls.table[id], this makes sure that the struct syscall returned
actually has an id the same value as key, making the later bpf_prog
matching all correct.
After fixing this bug, I can do perf trace on 38 more syscalls, and
because more syscalls are visible, we get 8 more syscalls that can be
augmented.
before:
perf $ perf trace -vv --max-events=1 |& grep Reusing
Reusing "open" BPF sys_enter augmenter for "stat"
Reusing "open" BPF sys_enter augmenter for "lstat"
Reusing "open" BPF sys_enter augmenter for "access"
Reusing "connect" BPF sys_enter augmenter for "accept"
Reusing "sendto" BPF sys_enter augmenter for "recvfrom"
Reusing "connect" BPF sys_enter augmenter for "bind"
Reusing "connect" BPF sys_enter augmenter for "getsockname"
Reusing "connect" BPF sys_enter augmenter for "getpeername"
Reusing "open" BPF sys_enter augmenter for "execve"
Reusing "open" BPF sys_enter augmenter for "truncate"
Reusing "open" BPF sys_enter augmenter for "chdir"
Reusing "open" BPF sys_enter augmenter for "mkdir"
Reusing "open" BPF sys_enter augmenter for "rmdir"
Reusing "open" BPF sys_enter augmenter for "creat"
Reusing "open" BPF sys_enter augmenter for "link"
Reusing "open" BPF sys_enter augmenter for "unlink"
Reusing "open" BPF sys_enter augmenter for "symlink"
Reusing "open" BPF sys_enter augmenter for "readlink"
Reusing "open" BPF sys_enter augmenter for "chmod"
Reusing "open" BPF sys_enter augmenter for "chown"
Reusing "open" BPF sys_enter augmenter for "lchown"
Reusing "open" BPF sys_enter augmenter for "mknod"
Reusing "open" BPF sys_enter augmenter for "statfs"
Reusing "open" BPF sys_enter augmenter for "pivot_root"
Reusing "open" BPF sys_enter augmenter for "chroot"
Reusing "open" BPF sys_enter augmenter for "acct"
Reusing "open" BPF sys_enter augmenter for "swapon"
Reusing "open" BPF sys_enter augmenter for "swapoff"
Reusing "open" BPF sys_enter augmenter for "delete_module"
Reusing "open" BPF sys_enter augmenter for "setxattr"
Reusing "open" BPF sys_enter augmenter for "lsetxattr"
Reusing "openat" BPF sys_enter augmenter for "fsetxattr"
Reusing "open" BPF sys_enter augmenter for "getxattr"
Reusing "open" BPF sys_enter augmenter for "lgetxattr"
Reusing "openat" BPF sys_enter augmenter for "fgetxattr"
Reusing "open" BPF sys_enter augmenter for "listxattr"
Reusing "open" BPF sys_enter augmenter for "llistxattr"
Reusing "open" BPF sys_enter augmenter for "removexattr"
Reusing "open" BPF sys_enter augmenter for "lremovexattr"
Reusing "fsetxattr" BPF sys_enter augmenter for "fremovexattr"
Reusing "open" BPF sys_enter augmenter for "mq_open"
Reusing "open" BPF sys_enter augmenter for "mq_unlink"
Reusing "fsetxattr" BPF sys_enter augmenter for "add_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "request_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "inotify_add_watch"
Reusing "fremovexattr" BPF sys_enter augmenter for "mkdirat"
Reusing "fremovexattr" BPF sys_enter augmenter for "mknodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchownat"
Reusing "fremovexattr" BPF sys_enter augmenter for "futimesat"
Reusing "fremovexattr" BPF sys_enter augmenter for "newfstatat"
Reusing "fremovexattr" BPF sys_enter augmenter for "unlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "linkat"
Reusing "open" BPF sys_enter augmenter for "symlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "readlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchmodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "faccessat"
Reusing "fremovexattr" BPF sys_enter augmenter for "utimensat"
Reusing "connect" BPF sys_enter augmenter for "accept4"
Reusing "fremovexattr" BPF sys_enter augmenter for "name_to_handle_at"
Reusing "fremovexattr" BPF sys_enter augmenter for "renameat2"
Reusing "open" BPF sys_enter augmenter for "memfd_create"
Reusing "fremovexattr" BPF sys_enter augmenter for "execveat"
Reusing "fremovexattr" BPF sys_enter augmenter for "statx"
after
perf $ perf trace -vv --max-events=1 |& grep Reusing
Reusing "open" BPF sys_enter augmenter for "stat"
Reusing "open" BPF sys_enter augmenter for "lstat"
Reusing "open" BPF sys_enter augmenter for "access"
Reusing "connect" BPF sys_enter augmenter for "accept"
Reusing "sendto" BPF sys_enter augmenter for "recvfrom"
Reusing "connect" BPF sys_enter augmenter for "bind"
Reusing "connect" BPF sys_enter augmenter for "getsockname"
Reusing "connect" BPF sys_enter augmenter for "getpeername"
Reusing "open" BPF sys_enter augmenter for "execve"
Reusing "open" BPF sys_enter augmenter for "truncate"
Reusing "open" BPF sys_enter augmenter for "chdir"
Reusing "open" BPF sys_enter augmenter for "mkdir"
Reusing "open" BPF sys_enter augmenter for "rmdir"
Reusing "open" BPF sys_enter augmenter for "creat"
Reusing "open" BPF sys_enter augmenter for "link"
Reusing "open" BPF sys_enter augmenter for "unlink"
Reusing "open" BPF sys_enter augmenter for "symlink"
Reusing "open" BPF sys_enter augmenter for "readlink"
Reusing "open" BPF sys_enter augmenter for "chmod"
Reusing "open" BPF sys_enter augmenter for "chown"
Reusing "open" BPF sys_enter augmenter for "lchown"
Reusing "open" BPF sys_enter augmenter for "mknod"
Reusing "open" BPF sys_enter augmenter for "statfs"
Reusing "open" BPF sys_enter augmenter for "pivot_root"
Reusing "open" BPF sys_enter augmenter for "chroot"
Reusing "open" BPF sys_enter augmenter for "acct"
Reusing "open" BPF sys_enter augmenter for "swapon"
Reusing "open" BPF sys_enter augmenter for "swapoff"
Reusing "open" BPF sys_enter augmenter for "delete_module"
Reusing "open" BPF sys_enter augmenter for "setxattr"
Reusing "open" BPF sys_enter augmenter for "lsetxattr"
Reusing "openat" BPF sys_enter augmenter for "fsetxattr"
Reusing "open" BPF sys_enter augmenter for "getxattr"
Reusing "open" BPF sys_enter augmenter for "lgetxattr"
Reusing "openat" BPF sys_enter augmenter for "fgetxattr"
Reusing "open" BPF sys_enter augmenter for "listxattr"
Reusing "open" BPF sys_enter augmenter for "llistxattr"
Reusing "open" BPF sys_enter augmenter for "removexattr"
Reusing "open" BPF sys_enter augmenter for "lremovexattr"
Reusing "fsetxattr" BPF sys_enter augmenter for "fremovexattr"
Reusing "open" BPF sys_enter augmenter for "mq_open"
Reusing "open" BPF sys_enter augmenter for "mq_unlink"
Reusing "fsetxattr" BPF sys_enter augmenter for "add_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "request_key"
Reusing "fremovexattr" BPF sys_enter augmenter for "inotify_add_watch"
Reusing "fremovexattr" BPF sys_enter augmenter for "mkdirat"
Reusing "fremovexattr" BPF sys_enter augmenter for "mknodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchownat"
Reusing "fremovexattr" BPF sys_enter augmenter for "futimesat"
Reusing "fremovexattr" BPF sys_enter augmenter for "newfstatat"
Reusing "fremovexattr" BPF sys_enter augmenter for "unlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "linkat"
Reusing "open" BPF sys_enter augmenter for "symlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "readlinkat"
Reusing "fremovexattr" BPF sys_enter augmenter for "fchmodat"
Reusing "fremovexattr" BPF sys_enter augmenter for "faccessat"
Reusing "fremovexattr" BPF sys_enter augmenter for "utimensat"
Reusing "connect" BPF sys_enter augmenter for "accept4"
Reusing "fremovexattr" BPF sys_enter augmenter for "name_to_handle_at"
Reusing "fremovexattr" BPF sys_enter augmenter for "renameat2"
Reusing "open" BPF sys_enter augmenter for "memfd_create"
Reusing "fremovexattr" BPF sys_enter augmenter for "execveat"
Reusing "fremovexattr" BPF sys_enter augmenter for "statx"
TL;DR:
These are the new syscalls that can be augmented
Reusing "openat" BPF sys_enter augmenter for "open_tree"
Reusing "openat" BPF sys_enter augmenter for "openat2"
Reusing "openat" BPF sys_enter augmenter for "mount_setattr"
Reusing "openat" BPF sys_enter augmenter for "move_mount"
Reusing "open" BPF sys_enter augmenter for "fsopen"
Reusing "openat" BPF sys_enter augmenter for "fspick"
Reusing "openat" BPF sys_enter augmenter for "faccessat2"
Reusing "openat" BPF sys_enter augmenter for "fchmodat2"
as for the perf trace output:
before
perf $ perf trace -e faccessat2 --max-events=1
[no output]
after
perf $ ./perf trace -e faccessat2 --max-events=1
0.000 ( 0.037 ms): waybar/958 faccessat2(dfd: 40, filename: "uevent") = 0
P.S. The reason why this bug was not found in the past five years is
probably because it only happens to the newer syscalls whose id is
greater, for instance, faccessat2 of id 439, which not a lot of people
care about when using perf trace.
[Arnaldo]: notes
That and the fact that the BPF code was hidden before having to use -e,
that got changed kinda recently when we switched to using BPF skels for
augmenting syscalls in 'perf trace':
⬢[acme@toolbox perf-tools-next]$ git log --oneline tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c
a9f4c6c999 perf trace: Collect sys_nanosleep first argument
29d16de26d perf augmented_raw_syscalls.bpf: Move 'struct timespec64' to vmlinux.h
5069211e2f perf trace: Use the right bpf_probe_read(_str) variant for reading user data
33b725ce7b perf trace: Avoid compile error wrt redefining bool
7d9642311b perf bpf augmented_raw_syscalls: Add an assert to make sure sizeof(augmented_arg->value) is a power of two.
262b54b6c9 perf bpf augmented_raw_syscalls: Add an assert to make sure sizeof(saddr) is a power of two.
1836480429 perf bpf_skel augmented_raw_syscalls: Cap the socklen parameter using &= sizeof(saddr)
cd2cece61a perf trace: Tidy comments related to BPF + syscall augmentation
5e6da6be30 perf trace: Migrate BPF augmentation to use a skeleton
⬢[acme@toolbox perf-tools-next]$
⬢[acme@toolbox perf-tools-next]$ git show --oneline --pretty=reference 5e6da6be30 | head -1
5e6da6be30 (perf trace: Migrate BPF augmentation to use a skeleton, 2023-08-10)
⬢[acme@toolbox perf-tools-next]$
I.e. from August, 2023.
One had as well to ask for BUILD_BPF_SKEL=1, which now is default if all
it needs is available on the system.
I simplified the code to not expose the 'struct syscall' outside of
tools/perf/util/syscalltbl.c, instead providing a function to go from
the index to the syscall id:
int syscalltbl__id_at_idx(struct syscalltbl *tbl, int idx);
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/lkml/ZmhlAxbVcAKoPTg8@x1
Link: https://lore.kernel.org/r/20240705132059.853205-2-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Michal has been contributing and reviewing patches across cgroup for a while
now. Add him as a maintainer.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Currently the event counting provided by misc.events is hierarchical,
it's not practical if user is only concerned with events of a
specified cgroup. Therefore, introduce misc.events.local collect events
specific to the given cgroup.
This is analogous to memory.events.local and pids.events.local.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This commit introduces the dm target flag mempool_needs_integrity. When
the flag is set, device mapper will call bioset_integrity_create on it's
bio sets. The target can then call bio_integrity_alloc on the bios
allocated from the table's mempool.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Various files had been missed from having accessor functions added for
the sake of dso reference count checking. Add the function calls and
missing dso accessor functions.
Fixes: ee756ef749 ("perf dso: Add reference count checking and accessor functions")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240704011745.1021288-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
It is possible that memory events are not supported on all CPUs.
Prints a warning by dumping the enabled CPU maps in this case.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20240706152035.86983-3-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
A platform can have more than one Arm SPE PMU. For example, a system
with multiple clusters may have each cluster enabled with its own Arm
SPE instance. In such case, the PMU devices will be named 'arm_spe_0',
'arm_spe_1', and so on.
Currently, the tool only supports 'arm_spe_0'. This commit extends
support to multiple Arm SPE PMUs by detecting the substring 'arm_spe_'.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20240706152035.86983-2-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Change the unused var in 'arch/x86/entry/syscalls/syscalltbl.sh' to '_'
when reading from '$sorted_table'. This change allows the script to pass
tests of ShellCheck before and after version 0.7.2 at the same time.
When building in arch x86, syscalltbl.sh got a ShellCheck warning, which
makes compilation error:
In arch/x86/entry/syscalls/syscalltbl.sh line 27:
while read nr _abi name entry _compat; do
^-^ SC2034: abi appears unused.
Verify use (or export if used externally).
^----^ SC2034: compat appears unused.
Verify use (or export if used externally).
The script reads unused param abi and compat. It uses format '_xxx' to
indicate dummy vars, which won't work properly when ShellCheck <= 0.7.2.
According to SC2034, the more general way of writing is to use directly
'_' to indicate discarding vars. 'entry' is also replaced by '_' because
it just happens to be defined in emit function, otherwise it will lead
to some misunderstandings.
Link: https://www.shellcheck.net/wiki/SC2034
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Link: https://lore.kernel.org/r/2143cab4cd8468c88860f4e5e382d0e6b4d89ac9.1720372178.git.royenheart@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Modified the object of 'memset' from '&lost.lost' to '&lost' in
record__read_lost_samples. This allows 'memset' to access memory properly
without causing out-of-bounds problems.
The problems got from builtin-record.c are:
In file included from /usr/include/string.h:495,
from util/parse-events.h:13,
from builtin-record.c:14:
In function 'memset',
inlined from 'record__read_lost_samples' at
builtin-record.c:1958:6,
inlined from '__cmd_record.constprop' at builtin-record.c:2817:2:
/usr/include/x86_64-linux-gnu/bits/string_fortified.h:71:10: error:
'__builtin_memset' offset [17, 64] from the object at 'lost' is out
of the bounds of referenced subobject 'lost' with type
'struct perf_record_lost_samples' at offset 0 [-Werror=array-bounds]
71|return __builtin___memset_chk (__dest,__ch,__len,__bos0 (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The error arised when performing a memset operation on the 'lost' variable,
the bytes of 'sizeof(lost)' exceeds that of '&lost.lost', which are 64
and 16.
Fixes: 6c1785cd75 ("perf record: Ensure space for lost samples")
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Link: https://lore.kernel.org/r/11e12f171b846577cac698cd3999db3d7f6c4d03.1720372317.git.royenheart@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
By default, perf sched map prints sched-in events for all the tasks
which may not be required all the time as it prints lot of symbols
and rows to the terminal.
With --task-name option, one could specify the specific task name
for which the map has to be shown. This would help in analyzing the
CPU usage patterns easier for that specific task. Since multiple
PID's might have the same task name, using task-name filter
would be more useful for debugging.
For other tasks, instead of printing the symbol, '-' is printed and
the same '.' is used to represent idle. '-' is used instead of symbol
for other tasks because it helps in clear visualization of task
of interest and secondly the symbol itself doesn't mean anything
because the sched-in of that symbol will not be printed(first sched-in
contains pid and the corresponding symbol).
When using the --task-name option, the sched-out time is represented
by a '*-'. Since not all task sched-in events are printed, the sched-out
time of the relevant task might be lost. This representation ensures
that the sched-out time of the interested task is not overlooked.
6.10.0-rc1
==========
*A0 131040.639793 secs A0 => migration/0:19
*. 131040.639801 secs . => swapper:0
. *B0 131040.639830 secs B0 => migration/1:24
. *. 131040.639836 secs
. . *C0 131040.640108 secs C0 => migration/2:30
. . *. 131040.640163 secs
. . . *D0 131040.640386 secs D0 => migration/3:36
. . . *. 131040.640395 secs
6.10.0-rc1 + patch (--task-name wdavdaemon)
=============
. *A0 . . . . - . 131040.641346 secs A0 => wdavdaemon:62509
. A0 *B0 . . . - . 131040.641378 secs B0 => wdavdaemon:62274
- *- B0 . . . - . 131040.641379 secs
*C0 . B0 . . . . . 131040.641572 secs C0 => wdavdaemon:62283
C0 . B0 . *D0 . . . 131040.641572 secs D0 => wdavdaemon:62277
C0 . B0 . D0 . *E0 . 131040.641578 secs E0 => wdavdaemon:62270
*- . B0 . D0 . E0 . 131040.641581 secs
. . B0 . D0 . *- . 131040.641583 secs
Reviewed-and-tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Chen Yu <yu.c.chen@intel.com>
Link: https://lore.kernel.org/r/20240707182716.22054-2-vineethr@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Merge series from Mohammad Rafi Shaik <quic_mohs@quicinc.com>:
This patch set change will fix the unbalanced pm_runtime_enable in wcd937x-sdw soundwire slave.
And removed the string compare with widget name in MIC BIAS settings, instead
of string compare use the MIC BIAS id's as value.
Removed separate handling for vdd-buck regulator supply which is not
required. The vdd-buck regulator supply enabled using bulk enable.
Added the error handling in wcd937x_probe() and disable the regulators in error case.
Remove unnecessary semicolon at the end of the switch statement.
This is detected by coccinelle.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240709012223.17393-1-nichen@iscas.ac.cn
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Revert commit 90dc946059 ("selftests/bpf: DENYLIST.aarch64: Remove
fexit_sleep") again. The fix in 19d3c179a3 ("bpf, arm64: Fix trampoline
for BPF_TRAMP_F_CALL_ORIG") does not address all of the issues and BPF
CI is still hanging and timing out:
https://github.com/kernel-patches/bpf/actions/runs/9905842936/job/27366435436
[...]
#89/11 fexit_bpf2bpf/func_replace_global_func:OK
#89/12 fexit_bpf2bpf/fentry_to_cgroup_bpf:OK
#89/13 fexit_bpf2bpf/func_replace_progmap:OK
#89 fexit_bpf2bpf:OK
Error: The operation was canceled.
Thus more investigation work & fixing is needed before the test can be put
in place again.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/bpf/20240705145009.32340-1-puranjay@kernel.org
Introduces KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
to provide assert-type equivalents for memory comparison.
While KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ are available for
expectations, the addition of these new macros ensures that assertions
can also be used for memory comparisons, enhancing the consistency and
completeness of the kunit framework.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Both KUNIT_FAIL and KUNIT_ASSERT_FAILURE defined to KUNIT_FAIL_ASSERTION
with different tpye of kunit_assert_type. The current naming of
KUNIT_ASSERT_FAILURE and KUNIT_FAIL_ASSERTION is confusing due to their
similarities. To improve readability and symmetry, renames
KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT. Makes the naming
consistent, with KUNIT_FAIL and KUNIT_FAIL_AND_ABORT being symmetrical.
Additionally, an explanation for KUNIT_FAIL_AND_ABORT has been added to
clarify its usage.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The current comment for KUNIT_ASSERT_STRNEQ incorrectly describes it as
an expectation. Since KUNIT_ASSERT_STRNEQ is an assertion, updates the
comment to correctly refer to it as such.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The alloc/copy code pattern is better consolidated to single kstrdup (and
kstrndup) calls instead. This gets rid of deprecated[1] strncpy() uses as
well. Replace one other strncpy() use with the more idiomatic strscpy().
Link: https://github.com/KSPP/linux/issues/90 [1]
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Most of these changes are Qualcomm SoC specific and came in just after
I sent out the last set of fixes. This includes two regression fixes
for SoC drivers, a defconfig change to ensure the Lenovo X13s is
usable and 11 changes to DT files to fix regressions and minor
platform specific issues.
Tony and Chunyan step back from their respective maintainership roles
on the omap and unisoc platforms, and Christophe in turn takes over
maintaining some of the Freescale SoC drivers that he has been taking
care of in practice already.
Lastly, there are two trivial fixes for the davinci and sunxi
platforms.
-----BEGIN PGP SIGNATURE-----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=JWNz
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of these changes are Qualcomm SoC specific and came in just after
I sent out the last set of fixes. This includes two regression fixes
for SoC drivers, a defconfig change to ensure the Lenovo X13s is
usable and 11 changes to DT files to fix regressions and minor
platform specific issues.
Tony and Chunyan step back from their respective maintainership roles
on the omap and unisoc platforms, and Christophe in turn takes over
maintaining some of the Freescale SoC drivers that he has been taking
care of in practice already.
Lastly, there are two trivial fixes for the davinci and sunxi
platforms"
* tag 'arm-fixes-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Update FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY
MAINTAINERS: Add more maintainers for omaps
ARM: davinci: Convert comma to semicolon
MAINTAINERS: Move myself from SPRD Maintainer to Reviewer
Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
arm64: dts: qcom: qdu1000: Fix LLCC reg property
arm64: dts: qcom: sm6115: add iommu for sdhc_1
arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording
arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping
soc: qcom: pmic_glink: disable UCSI on sc8280xp
arm64: defconfig: enable Elan i2c-hid driver
arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset
arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on
arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI
arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer
arm64: dts: allwinner: Fix PMIC interrupt number
arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD
arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers
arm64: dts: qcom: sc8180x: Fix LLCC reg property again
* iommu/iommufd/paging-domain-alloc:
RDMA/usnic: Use iommu_paging_domain_alloc()
wifi: ath11k: Use iommu_paging_domain_alloc()
wifi: ath10k: Use iommu_paging_domain_alloc()
drm/msm: Use iommu_paging_domain_alloc()
vhost-vdpa: Use iommu_paging_domain_alloc()
vfio/type1: Use iommu_paging_domain_alloc()
iommufd: Use iommu_paging_domain_alloc()
iommu: Add iommu_paging_domain_alloc() interface
* iommu/iommufd/attach-handles:
iommu: Extend domain attach group with handle support
iommu: Add attach handle to struct iopf_group
iommu: Remove sva handle list
iommu: Introduce domain attachment handle
The exception vector of the booting hart is not set before enabling
the mmu and then still points to the value of the previous firmware,
typically _start. That makes it hard to debug setup_vm() when bad
things happen. So fix that by setting the exception vector earlier.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: yang.zhang <yang.zhang@hexintek.com>
Link: https://lore.kernel.org/r/20240508022445.6131-1-gaoshanliukou@163.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Andrew Jones <ajones@ventanamicro.com> says:
Zawrs provides two instructions (wrs.nto and wrs.sto), where both are
meant to allow the hart to enter a low-power state while waiting on a
store to a memory location. The instructions also both wait an
implementation-defined "short" duration (unless the implementation
terminates the stall for another reason). The difference is that while
wrs.sto will terminate when the duration elapses, wrs.nto, depending on
configuration, will either just keep waiting or an ILL exception will be
raised. Linux will use wrs.nto, so if platforms have an implementation
which falls in the "just keep waiting" category (which is not expected),
then it should _not_ advertise Zawrs in the hardware description.
Like wfi (and with the same {m,h}status bits to configure it), when
wrs.nto is configured to raise exceptions it's expected that the higher
privilege level will see the instruction was a wait instruction, do
something, and then resume execution following the instruction. For
example, KVM does configure exceptions for wfi (hstatus.VTW=1) and
therefore also for wrs.nto. KVM does this for wfi since it's better to
allow other tasks to be scheduled while a VCPU waits for an interrupt.
For waits such as those where wrs.nto/sto would be used, which are
typically locks, it is also a good idea for KVM to be involved, as it
can attempt to schedule the lock holding VCPU.
This series starts with Christoph's addition of the riscv
smp_cond_load_relaxed function which applies wrs.sto when available.
That patch has been reworked to use wrs.nto and to use the same approach
as Arm for the wait loop, since we can't have arbitrary C code between
the load-reserved and the wrs. Then, hwprobe support is added (since the
instructions are also usable from usermode), and finally KVM is
taught about wrs.nto, allowing guests to see and use the Zawrs
extension.
We still don't have test results from hardware, and it's not possible to
prove that using Zawrs is a win when testing on QEMU, not even when
oversubscribing VCPUs to guests. However, it is possible to use KVM
selftests to force a scenario where we can prove Zawrs does its job and
does it well. [4] is a test which does this and, on my machine, without
Zawrs it takes 16 seconds to complete and with Zawrs it takes 0.25
seconds.
This series is also available here [1]. In order to use QEMU for testing
a build with [2] is needed. In order to enable guests to use Zawrs with
KVM using kvmtool, the branch at [3] may be used.
[1] https://github.com/jones-drew/linux/commits/riscv/zawrs-v3/
[2] https://lore.kernel.org/all/20240312152901.512001-2-ajones@ventanamicro.com/
[3] https://github.com/jones-drew/kvmtool/commits/riscv/zawrs/
[4] cb2beccebc
Link: https://lore.kernel.org/r/20240426100820.14762-8-ajones@ventanamicro.com
* b4-shazam-merge:
KVM: riscv: selftests: Add Zawrs extension to get-reg-list test
KVM: riscv: Support guest wrs.nto
riscv: hwprobe: export Zawrs ISA extension
riscv: Add Zawrs support for spinlocks
dt-bindings: riscv: Add Zawrs ISA extension description
riscv: Provide a definition for 'pause'
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
