Correct the example to match the help text from the devlink utility.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add compatible string 'fsl,lx2160a-dspi' and allow fall back to
'fsl,ls2085a-dspi'.
Fix below CHECK_DTBS warning.
arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb: spi@2100000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,lx2160a-dspi', 'fsl,ls2085a-dspi'] is too long
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240703165931.2325807-2-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dmas and dma-names properties because dspi support dma transfer.
Fix below warnings:
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dtb: spi@2120000: Unevaluated properties are not allowed ('dma-names', 'dmas', 'little-endian' were unexpected)
from schema $id: http://devicetree.org/schemas/spi/fsl,dspi.yaml#
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240703165931.2325807-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The interrupt is optional in hardware and not connected on
some boards. Make it optional in the binding.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://patch.msgid.link/20240708084107.38986-3-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The IRQ line might not be connected on some boards. Allow the driver
to be probed without it.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://patch.msgid.link/20240708084107.38986-5-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct instances supplied by the drivers are never modified.
Handle them as const in the regmap core allowing the drivers to put them
into .rodata.
Also add a new entry to const_structs.checkpatch to make sure future
instances of this struct already enter the tree as const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240706-regmap-const-structs-v1-2-d08c776da787@weissschuh.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Many structs used by regmap should be const by default.
Add entries to const_structs.checkpatch for them for checkpatch.pl to
warn on new non-const additions.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240706-regmap-const-structs-v1-1-d08c776da787@weissschuh.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Use get_unaligned_be16 instead of be16_to_cpup and get_unaligned_be32
instead of be32_to_cpup for potentially broken alignment.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240707083011.98-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h in
snd_soc_dai_link_event_pre_pmu() to reduce error handling (less error
paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-11-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h in dapm_cnew_widget() to
reduce error handling (less error paths) and make the code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-10-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-9-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h, instead of devm interface, to
make the code more obvious that memory is not used outside this scope.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-8-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h, instead of devm interface, to
make the code more obvious that memory is not used outside this scope.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-7-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h, instead of devm interface, to
make the code more obvious that memory is not used outside this scope.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-6-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-5-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-4-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h to reduce error handling (less
error paths) and make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-3-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h in audio_iio_aux_probe() to
reduce error handling (less error paths) and make the code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-2-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate the memory with scoped/cleanup.h in audio_iio_aux_add_dapms()
to reduce error handling (less error paths) and make the code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703-asoc-cleanup-h-v1-1-71219dfd0aef@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
xfrm_policy_kill() is called at different places to delete xfrm
policy. It will call xfrm_pol_put(). But xfrm_dev_policy_delete() is
not called to free the policy offloaded to hardware.
The three commits cited here are to handle this issue by calling
xfrm_dev_policy_delete() outside xfrm_get_policy(). But they didn't
cover all the cases. An example, which is not handled for now, is
xfrm_policy_insert(). It is called when XFRM_MSG_UPDPOLICY request is
received. Old policy is replaced by new one, but the offloaded policy
is not deleted, so driver doesn't have the chance to release hardware
resources.
To resolve this issue for all cases, move xfrm_dev_policy_delete()
into xfrm_policy_kill(), so the offloaded policy can be deleted from
hardware when it is called, which avoids hardware resources leakage.
Fixes: 919e43fad5 ("xfrm: add an interface to offload policy")
Fixes: bf06fcf4be ("xfrm: add missed call to delete offloaded policies")
Fixes: 982c3aca8b ("xfrm: delete offloaded policy")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In cited commit, netdev_tracker_alloc() is called for the newly
allocated xfrm state, but dev_hold() is missed, which causes netdev
reference count imbalance, because netdev_put() is called when the
state is freed in xfrm_dev_state_free(). Fix the issue by replacing
netdev_tracker_alloc() with netdev_hold().
Fixes: f8a70afafc ("xfrm: add TX datapath support for IPsec packet offload mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
At this time, conntrack either returns NF_ACCEPT or NF_DROP.
To improve debuging it would be nice to be able to replace NF_DROP verdict
with NF_DROP_REASON() helper,
This helper releases the skb instantly (so drop_monitor can pinpoint
exact location) and returns NF_STOLEN.
Prepare call sites to deal with this before introducing such changes
in conntrack and nat core.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds fixes for setting scaling max frequency on systems
without a dedicated MSR for setting CPPC requests.
-----BEGIN PGP SIGNATURE-----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=KOPt
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v6.11-2024-07-07' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge more amd-pstate changes for 6.11 from Mario Liminciello:
"This adds fixes for setting scaling max frequency on systems
without a dedicated MSR for setting CPPC requests."
* tag 'amd-pstate-v6.11-2024-07-07' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts drivers/mmc/* from tasklet to BH workqueue.
Based on the work done by Tejun Heo <tj@kernel.org>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aubin Constans <aubin.constans@microchip.com>
Acked-by: Aubin Constans <aubin.constans@microchip.com>
Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20240701100736.4001658-1-allen.lkml@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts the SDHI driver from tasklet to BH workqueue.
Based on the work done by Tejun Heo <tj@kernel.org>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
[wsa: fixed build faliures, corrected whitespace issues]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20240626085015.32171-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some controllers may not be able to reach a bus clock as low as 400 KHz
due to a lack of sufficient divisors. In these cases, the SD card slot
becomes non-functional as Linux continuously attempts to set the bus
clock to 400 KHz. If the controller is incapable of getting that low,
set its minimum frequency instead. While this may eliminate some SD
cards, it allows those capable of operating at the controller's minimum
frequency to be used.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240625-gigantic-frown-1ef4afa3e6fa@wendy
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Turns out that this is not compiling anymore because the hid_bpf_ops
struct_ops definition had a change during the revisions.
Fixes: e342d6f6f7 ("HID: samples: convert the 2 HID-BPF samples into struct_ops")
Link: https://patch.msgid.link/20240705-for-6-11-bpf-v1-1-1960e3165c9e@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Commit c0e5f4e73a ("misc: rtsx: Add support for RTS5261") silently
removed RTSX_MS_CARD from its MFD cell, so rtsx_pci_ms isn't used
by any driver anymore.
Since there doesn't seem to any complaint, hence drop the driver.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20240620031159.142637-1-kai.heng.feng@canonical.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When defined using bit-fields, the compiler takes care of packing the
bits in a memory-efficient way and frees us from defining
LANDLOCK_SHIFT_ACCESS_* by hand. The exact memory layout does not
matter in our use case.
The manual definition of LANDLOCK_SHIFT_ACCESS_* has resulted in bugs in
at least two recent patch sets [1] [2] where new kinds of handled access
rights were introduced.
Cc: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com>
Cc: Tahera Fahimi <fahimitahera@gmail.com>
Link: https://lore.kernel.org/r/ebd680cc-25d6-ee14-4856-310f5e5e28e4@huawei-partners.com [1]
Link: https://lore.kernel.org/r/ZmLEoBfHyUR3nKAV@google.com [2]
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240610082115.1693267-1-gnoack@google.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
When ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/pci-stub.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/pci-pf-stub.o
Add the missing MODULE_DESCRIPTION() macro.
Link: https://lore.kernel.org/r/20240610-md-drivers-pci-v1-1-139c135853ea@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
[bhelgaas: update MODULE_DESCRIPTION() text]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
As it turns out, clearing the BSS was not the right fix for the issue
that was ultimately fixed by commit decd347c2a ("x86/efistub:
Reinstate soft limit for initrd loading"), and given that the Windows
EFI loader becomes very unhappy when entered with garbage in BSS, this
is one thing that x86 PC EFI implementations can be expected to get
right.
So drop it from the pure PE entrypoint. The handover protocol entrypoint
still needs this - it is used by the flaky distro bootloaders that
barely implement PE/COFF at all.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The fail label is only used in a situation where the previous EFI API
call succeeded, and so status will be set to EFI_SUCCESS. Fix this, by
dropping the goto entirely, and call efi_exit() with the correct error
code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
0c18184de9 ("platform/x86: apple-gmux: support MMIO gmux on T2 Macs")
brought support for T2 Macs in apple-gmux. But in order to use dual GPU,
the integrated GPU has to be enabled. On such dual GPU EFI Macs, the EFI
stub needs to report that it is booting macOS in order to prevent the
firmware from disabling the iGPU.
This patch is also applicable for some non T2 Intel Macs.
Based on this patch for GRUB by Andreas Heider <andreas@heider.io>:
https://lists.gnu.org/archive/html/grub-devel/2013-12/msg00442.html
Credits also goto Kerem Karabay <kekrby@gmail.com> for helping porting
the patch to the Linux kernel.
Cc: Orlando Chamberlain <orlandoch.dev@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
[ardb: limit scope using list of DMI matches provided by Lukas and Orlando]
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The smbios.c source file is not currently included in the x86 build, and
before we can do so, it needs some tweaks to build correctly in
combination with the EFI mixed mode support.
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Work on a single address to simplify the logic, and prepare the callers
from using better helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240706075228.2350978-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Get callers out of poking into bvec internals a bit more. Not a huge win
right now, but with the proposed new DMA mapping API we might end up with
a lot more of this otherwise.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240706075228.2350978-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add ltr_restore support to undo the ltr_ignore action. It sets the
ltr_ignore bit of the corresponding IP to 0. Ltr_restore reuses some
functionality of pmc_core_ltr_ignore_write() so moved the common
functionality into a helper function.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20240624203218.2428475-10-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace ternary operator with Elvis operator in
pmc_core_ltr_ignore_write() for better readability
of the code.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20240624203218.2428475-9-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
DEFINE_SHOW_STORE_ATTRIBUTE() macro can be used for the ltr_ignore
attribute for better readability.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20240624203218.2428475-8-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
min_t() check is not needed in pmc_core_ltr_ignore_write().
kstrtox() has a built-in overflow check.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20240624203218.2428475-7-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a column in ltr_show output to show if the IP has been ignored.
A mutex lock is used to protect the critical section as other processes
might try to write to the LTR ignore register at the same time.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Link: https://lore.kernel.org/r/20240624203218.2428475-6-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move pmc variable assignment closer to the conditional statement of
its first use for better readability.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20240624203218.2428475-5-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Convert the index variables type to unsigned to avoid confusion and
errors.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Link: https://lore.kernel.org/r/20240624203218.2428475-4-xi.pardee@linux.intel.com
[ij: Converted also pmc_core_lpm_get_arr_size() to return unsigned int]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use macros defined in cleanup.h to automate the mutex lock/unlock flow.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Link: https://lore.kernel.org/r/20240624203218.2428475-3-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use the return value of pmc_core_send_msg() directly instead of
assigning another code when an error occurs.
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Link: https://lore.kernel.org/r/20240624203218.2428475-2-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
