Document a type attribute used by userspace to discern different types of
NVMEM devices. The implementation is already present, the ABI document is
missing, add it.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-14-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace two spaces with tab in the sysfs attribute documentation.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-13-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The same checks have already been done in sysfs_kf_bin_write() and
sysfs_kf_bin_read() just before the callbacks are invoked.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-12-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nvmem_cells_groups is a global variable that is also mutated.
This is complicated and error-prone.
Instead use a normal stack variable.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-11-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core provides a function to easily register a single group.
Use it and remove the now unnecessary nvmem_cells_groups array.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On newer SoCs, the eFuse hardware can require a power-domain to operate,
add it as optional.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This device currently reports an "Unknown" type in sysfs.
Since it is an eFuse hardware device, set its type to OTP.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Rockchip OTP describes its layout via devicetree subnodes,
so set the appropriate property.
Fixes: 2cc3b37f5b ("nvmem: add explicit config option to read old syntax fixed OF cells")
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use __free for device_node values, and thus drop calls to
of_node_put.
The goal is to reduce memory management issues by using this
scope-based of_node_put() cleanup to simplify function exit
handling. When using __free a resource is allocated within a
block, it is automatically freed at the end of the block.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: MarileneGarcia <marilene.agarcia@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem-apple-efuses.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem_brcm_nvram.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem_u-boot-env.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zeroout can access a significant capacity and take longer than the user
expected. A user may change their mind about wanting to run that
command and attempt to kill the process and do something else with their
device. But since the task is uninterruptable, they have to wait for it
to finish, which could be many hours.
Add a new BLKDEV_ZERO_KILLABLE flag for blkdev_issue_zeroout that checks
for a fatal signal at each iteration so the user doesn't have to wait for
their regretted operation to complete naturally.
Heavily based on an earlier patch from Keith Busch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240701165219.1571322-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only fall back from hardware Write Zeroes failures when
blkdev_issue_write_zeroes returns -EOPNOTSUPP;
Note that blkdev_issue_write_zeroes turns any failure into -EOPNOTSUPP
when the write zeroes queue limit has been cleared to 0, so this still
catches all I/O errors where the driver detected missing support
for the hardware acceleration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240701165219.1571322-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split out two well-defined helpers for hardware supported Write Zeroes
and manually writing zeroes using the Write command.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240701165219.1571322-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move these checks out of the lower level helpers and into the higher level
ones to prepare for refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240701165219.1571322-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__blkdev_issue_zeroout is a purely kernel internal API and thus can rely
on the block layer sector alignment checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240701165219.1571322-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Contrary to the comment in __blkdev_issue_write_zeroes, nothing here
checks for a potential bi_size overflow. Add a helper mirroring
the secure erase code for the check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240701165219.1571322-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
According to the C standard 3.4.3p3, the result of signed integer overflow
is undefined. The macro nilfs_cnt32_ge(), which compares two sequence
numbers, uses signed integer subtraction that can overflow, and therefore
the result of the calculation may differ from what is expected due to
undefined behavior in different environments.
Similar to an earlier change to the jiffies-related comparison macros in
commit 5a581b367b ("jiffies: Avoid undefined behavior from signed
overflow"), avoid this potential issue by changing the definition of the
macro to perform the subtraction as unsigned integers, then cast the
result to a signed integer for comparison.
Link: https://lkml.kernel.org/r/20130727225828.GA11864@linux.vnet.ibm.com
Link: https://lkml.kernel.org/r/20240702183512.6390-1-konishi.ryusuke@gmail.com
Fixes: 9ff05123e3 ("nilfs2: segment constructor")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With ARCH=sh, make allmodconfig && make W=1 C=1 reports: WARNING: modpost:
missing MODULE_DESCRIPTION() in lib/math/rational.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Link: https://lkml.kernel.org/r/20240702-md-sh-lib-math-v1-1-93f4ac4fa8fd@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With ARCH=csky, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/zlib_deflate/zlib_deflate.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Link: https://lkml.kernel.org/r/20240613-md-csky-lib-zlib_deflate-v1-1-83504d9a27d6@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Guo Ren <guoren@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix make W=1 warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/ufs/ufs.o
Link: https://lkml.kernel.org/r/20240510-ufs-md-v1-1-85eaff8c6beb@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace the "Sr" with "sr", the example is wrong if sl and N don't have
child nodes, so sr should be red node.
Link: https://lkml.kernel.org/r/20240628142229.69419-1-zxcvb600870024@gmail.com
Signed-off-by: Hsin Chang Yu <zxcvb600870024@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This adds sanity checks for ocfs2_dir_entry to make sure all members of
ocfs2_dir_entry don't stray beyond valid memory region.
Link: https://lkml.kernel.org/r/20240626104433.163270-1-llfamsec@gmail.com
Signed-off-by: lei lu <llfamsec@gmail.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit adds kernel-doc style comments with complete parameter
descriptions for the function ocfs2_prepare_orphan_dir.
Link: https://lkml.kernel.org/r/20240322063718.88183-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 0258b5fd7c ("coredump: Limit coredumps to a single thread
group") zap_process() doesn't need the "task_struct *start" arg,
zap_threads() can pass "signal_struct *signal" instead.
This simplifies the code and allows to use __for_each_thread() which
is slightly more efficient.
Link: https://lkml.kernel.org/r/20240625140311.GA20787@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove the helper function blk_alloc_zone_bitmap() and replace its
single call site with a call to bitmap_alloc(). To be consistent with
this change, use bitmap_free() to free a disk convnetional zone bitmap.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240704052816.623865-6-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that device mapper can handle resetting all zones of a mapped zoned
device using REQ_OP_ZONE_RESET_ALL, all zoned block device drivers
support this operation. With this, the request queue feature
BLK_FEAT_ZONE_RESETALL is not necessary and the emulation code in
blk-zone.c can be removed.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240704052816.623865-5-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This commit implements processing of the REQ_OP_ZONE_RESET_ALL operation
for zoned mapped devices. Given that this operation always has a BIO
sector of 0 and a 0 size, processing through the regular BIO
__split_and_process_bio() function does not work because this function
would always select the first target. Instead, handling of this
operation is implemented using the function __send_zone_reset_all().
Similarly to the __send_empty_flush() function, the new
__send_zone_reset_all() function manually goes through all targets of a
mapped device table doing the following:
1) If the target can natively support REQ_OP_ZONE_RESET_ALL,
__send_duplicate_bios() is used to forward the reset all operation to
the target. This case is handled with the
__send_zone_reset_all_native() function.
2) For other targets, the function __send_zone_reset_all_emulated() is
executed to emulate the execution of REQ_OP_ZONE_RESET_ALL using
regular REQ_OP_ZONE_RESET operations.
Targets that can natively support REQ_OP_ZONE_RESET_ALL are identified
using the new target field zone_reset_all_supported. This boolean is set
to true in for targets that have reliable zone limits, that is, targets
that map all sequential write required zones of their zoned device(s).
Setting this field is handled in dm_set_zones_restrictions() and
device_get_zone_resource_limits().
For targets with unreliable zone limits, REQ_OP_ZONE_RESET_ALL must be
emulated (case 2 above). This is implemented with
__send_zone_reset_all_emulated() and is similar to the block layer
function blkdev_zone_reset_all_emulated(): first a report zones is done
for the zones of the target to identify zones that need reset, that is,
any sequential write required zone that is not already empty. This is
done using a bitmap and the function dm_zone_get_reset_bitmap() which
sets to 1 the bit corresponding to a zone that needs reset. Next, this
zone bitmap is inspected and a clone BIO modified to use the
REQ_OP_ZONE_RESET operation issued for any zone with its bit set in the
zone bitmap.
This implementation is more efficient than what the block layer does
with blkdev_zone_reset_all_emulated(), which is always used for DM zoned
devices currently: as we can natively use REQ_OP_ZONE_RESET_ALL on
targets mapping all sequential write required zones, resetting all zones
of a zoned mapped device can be much faster compared to always emulating
this operation using regular per-zone reset. In the worst case, this
implementation is as-efficient as the block layer emulation. This
reduction in the time it takes to reset all zones of a zoned mapped
device depends directly on the mapped device targets mapping (reliable
zone limits or not).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240704052816.623865-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use a single switch-case to simplify is_abnormal_io() and make this
function more readable and easier to modify.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240704052816.623865-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow creating a zoned null_blk device with the initial state of its
sequential write required zones to be FULL. This is convenient to avoid
having to first write these zones to perform read performance evaluation
or test zone management operations such as zone reset (and zone reset
all).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240704052816.623865-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the inode variable now that the last user is gone.
Fixes: a17ece76bc ("loop: regularize upgrading the block size for direct I/O")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240705053114.2042976-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The exit() callback is optional, remove the empty one.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
The exit() callback is optional, remove the empty one.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
The exit() callback is optional, remove the empty one.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
PCI Error recovery support is required to recover the controller upon
detection of PCI errors. Add support for the PCI error recovery callback
handlers in mpi3mr driver.
Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Co-developed-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Link: https://lore.kernel.org/r/20240627101735.18286-2-sumit.saxena@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.3
This patch set contains bug fixes related to discovery, submission of
mailbox commands, and proper endianness conversions.
The patches were cut against Martin's 6.11/scsi-queue tree.
Link: https://lore.kernel.org/r/20240628172011.25921-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On big endian architectures, it is possible to run into a memory out of
bounds pointer dereference when FCP targets are zoned.
In lpfc_prep_embed_io, the memcpy(ptr, fcp_cmnd, sgl->sge_len) is
referencing a little endian formatted sgl->sge_len value. So, the memcpy
can cause big endian systems to crash.
Redefine the *sgl ptr as a struct sli4_sge_le to make it clear that we are
referring to a little endian formatted data structure. And, update the
routine with proper le32_to_cpu macro usages.
Fixes: af20bb73ac ("scsi: lpfc: Add support for 32 byte CDBs")
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240628172011.25921-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When setting trunk modes through sysfs, the SLI_CONFIG mailbox command's
command payload length is incorrectly hardcoded to 12 bytes. SLI_CONFIG's
payload length field should be specified large enough to encompass both the
submailbox command header and the submailbox request itself.
Thus, replace the hardcoded 12 bytes with a clearer calculation by way of
sizeof(struct lpfc_mbx_set_trunk_mode) - sizeof(struct lpfc_sli4_cfg_mhdr).
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240628172011.25921-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The MBX_TIMEOUT return code is not handled in lpfc_get_sfp_info and the
routine unconditionally frees submitted mailbox commands regardless of
return status. The issue is that for MBX_TIMEOUT cases, when firmware
returns SFP information at a later time, that same mailbox memory region
references previously freed memory in its cmpl routine.
Fix by adding checks for the MBX_TIMEOUT return code. During mailbox
resource cleanup, check the mbox flag to make sure that the wait did not
timeout. If the MBOX_WAKE flag is not set, then do not free the resources
because it will be freed when firmware completes the mailbox at a later
time in its cmpl routine.
Also, increase the timeout from 30 to 60 seconds to accommodate boot
scripts requiring longer timeouts.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240628172011.25921-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In rare cases when a fabric node is recovered after a link bounce and
before dev_loss_tmo callbk is reached, the driver may leave the fabric node
in an inconsistent state with the NLP_IN_DEV_LOSS flag perpetually set.
In lpfc_dev_loss_tmo_callbk, a check is added for a recovered fabric node.
If the node is recovered, then don't queue the lpfc_dev_loss_tmo_handler
work. In lpfc_dev_loss_tmo_handler, the path taken for the recovered fabric
nodes is updated to clear the NLP_IN_DEV_LOSS flag.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240628172011.25921-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If previously in REG_LOGIN_ISSUE state, then remove the requirement that
PLOGI must have been received from the remote port before issuing a PRLI.
After GID_FT completes, it does not matter whether the driver itself sent a
PLOGI or received one. The fact that we're in REG_LOGIN_ISSUE state simply
means that the next state should be issuing the PRLI to continue discovery
of the remote port.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240628172011.25921-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
