Currently we only mark sectors as locked if there is a *NEW* delalloc
range for it.
But NEW delalloc range is not the same as dirty sectors we want to
submit, e.g:
0 32K 64K 96K 128K
| |////////||///////| |////|
120K
For above 64K page size case, writepage_delalloc() for page 0 will find
and lock the delalloc range [32K, 96K), which is beyond the page
boundary.
Then when writepage_delalloc() is called for the page 64K, since [64K,
96K) is already locked, only [120K, 128K) will be locked.
This means, although range [64K, 96K) is dirty and will be submitted
later by extent_writepage_io(), it will not be marked as locked.
This is fine for now, as we call btrfs_folio_end_writer_lock_bitmap() to
free every non-compressed sector, and compression is only allowed for
full page range.
But this is not safe for future sector perfect compression support, as
this can lead to double folio unlock:
Thread A | Thread B
---------------------------------------+--------------------------------
| submit_one_async_extent()
| |- extent_clear_unlock_delalloc()
extent_writepage() | |- btrfs_folio_end_writer_lock()
|- btrfs_folio_end_writer_lock_bitmap()| |- btrfs_subpage_end_and_test_writer()
| | | |- atomic_sub_and_test()
| | | /* Now the atomic value is 0 */
|- if (atomic_read() == 0) | |
|- folio_unlock() | |- folio_unlock()
The root cause is the above range [64K, 96K) is dirtied and should also
be locked but it isn't.
So to make everything more consistent and prepare for the incoming
sector perfect compression, mark all dirty sectors as locked.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently for subpage (sector size < page size) cases, we reuse subpage
locked bitmap to find out all delalloc ranges we have locked, and run
all those found ranges.
However such reuse is not perfect, e.g.:
0 32K 64K 96K 128K
| |////////||///////| |////|
120K
For above range, writepage_delalloc() for page 0 will handle the range
[32K, 96k), note delalloc range can be beyond the page boundary.
But writepage_delalloc() for page 64K will only handle range [120K,
128K), as the previous run on page 0 has already handled range [64K,
96K).
Meanwhile for the writeback we should expect range [64K, 96K) to also be
locked, this leads to the mismatch from locked bitmap and delalloc
range.
This is not causing problems yet, but it's still an inconsistent
behavior.
So instead of relying on the subpage locked bitmap, move the delalloc
range search using local @delalloc_bitmap, so that we can remove the
existing btrfs_folio_find_writer_locked().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function extent_writepage_io() will submit the dirty sectors inside
the page for the write.
But recently to co-operate with the incoming subpage compression
enhancement, a new bitmap is introduced to
btrfs_bio_ctrl::submit_bitmap, to only avoid a subset of the dirty
range.
This is because we can have the following cases with 64K page size:
0 16K 32K 48K 64K
| |/////////| |/|
52K
For range [16K, 32K), we queue the dirty range for compression, which is
ran in a delayed workqueue.
Then for range [48K, 52K), we go through the regular submission path.
In that case, our btrfs_bio_ctrl::submit_bitmap will exclude the range
[16K, 32K).
The dirty flags for the range [16K, 32K) is only cleared when the
compression is done, by the extent_clear_unlock_delalloc() call inside
submit_one_async_extent().
This patch fix the false alert by removing the
btrfs_folio_assert_not_dirty() check, since it's no longer correct for
subpage compression cases.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For btrfs with sector size < page size (e.g. 4K sector size, 64K page
size), and enable the sector perfect compression support, then the
following dirty range can lead to problems:
0 32K 64K 96K 128K
| |///////||//////| |/|
124K
In above case, if we start writeback for that inode, the last dirty
range [124K, 128K) will not be submitted and cause reserved space
leakage:
- Start writeback for page 0
We find the range [32K, 96K) is suitable for compression, and queue it
into a workqueue to do the delayed compression and submission.
- Compression happens for range [32K, 96K)
Function extent_range_clear_dirty_for_io() is called, however it is
only doing full page handling, not considering any the extra bitmaps
for subpage cases.
That function will clear page dirty for both page 0 and page 64K.
- Writeback for the inode is done
Because page 64K has its dirty flag cleared, it will not be considered
as a writeback target.
This means the range [124K, 128K) will not be submitted, and reserved
space for it will be leaked.
Fix this problem by using the subpage helper to clear the dirty flag.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[PROBLEM]
If sector perfect compression is enabled for sector size < page size
case, the following case can lead dirty ranges not being written back:
0 32K 64K 96K 128K
| |///////||//////| |/|
124K
In above example, the page size is 64K, and we need to write back above
two pages.
- Submit for page 0 (main thread)
We found delalloc range [32K, 96K), which can be compressed.
So we queue an async range for [32K, 96K).
This means, the page unlock/clearing dirty/setting writeback will
all happen in a workqueue context.
- The compression is done, and compressed range is submitted (workqueue)
Since the compression is done in asynchronously, the compression can
be done before the main thread to submit for page 64K.
Now the whole range [32K, 96K), involving two pages, will be marked
writeback.
- Submit for page 64K (main thread)
extent_write_cache_pages() got its wbc->sync_mode is WB_SYNC_NONE,
so it skips the writeback wait.
And unlock the page and exit. This means the dirty range [124K, 128K)
will never be submitted, until next writeback happens for page 64K.
This will never happen for previous kernels because:
- For sector size == page size case
Since one page is one sector, if a page is marked writeback it will
not have dirty flags.
So this corner case will never hit.
- For sector size < page size case
We never do subpage compression, a range can only be submitted for
compression if the range is fully page aligned.
This change makes the subpage behavior mostly the same as non-subpage
cases.
[ENHANCEMENT]
Instead of relying WB_SYNC_NONE check only, if it's a subpage case, then
always wait for writeback flags.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are already two bugs (one in zlib, one in zstd) that involved
compression path is not handling sector size < page size cases well.
So it makes more sense to make sure that btrfs_compress_folios() returns
Since we already have two bugs (one in zlib, one in zstd) in the
compression path resulting the @total_in be to larger than the
to-be-compressed range length, there is enough reason to add an ASSERT()
to make sure the total read-in length doesn't exceed the input length.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inside zstd_compress_folios(), after exhausted one input page, we need
to switch to the next page as input.
However when counting the total input bytes (@tot_in), we always increase
it by PAGE_SIZE.
For the following case, it can cause incorrect value:
0 32K 64K 96K
| |///////////||///////////|
After compressing range [32K, 64K), we switch to the next page, and
increasing @tot_in by 64K, while we only read 32K.
This will cause the @total_in to return a value larger than the input
length.
Fix it by only increase @tot_in by the input size.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inside zlib_compress_folios(), each time we switch the input page cache,
the @start is increased by PAGE_SIZE.
But for the incoming compression support for sector size < page size
(previously we support compression only when the range is fully page
aligned), this is not going to handle the following case:
0 32K 64K 96K
| |///////////||///////////|
@start has the initial value 32K, indicating the start filepos of the
to-be-compressed range.
And when grabbing the first page as input, we always call "start +=
PAGE_SIZE;".
But since @start is starting at 32K, it will be increased by 64K,
resulting it to be 96K for the next range, causing incorrect input range
and corruption for the future subpage compression.
Fix it by only increase @start by the input size.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently CONFIG_BTRFS_EXPERIMENTAL is not only for the extra debugging
output, but also for experimental features.
This is not ideal to distinguish planned but not yet stable features
from those purely designed for debugging.
This patch splits the following features into CONFIG_BTRFS_EXPERIMENTAL:
- Extent map shrinker
This seems to be the first one to exit experimental.
- Extent tree v2
This seems to be the last one to graduate from experimental.
- Raid stripe tree
- Csum offload mode
- Send protocol v3
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
According to the description, CONFIG_BTRFS_DEBUG is only for extra
debug info, meanwhile sanity checks should be managed by
CONFIG_BTRFS_ASSERT.
There is no need to check both to enable assert_rbio().
Just remove the check for CONFIG_BTRFS_DEBUG.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Check if the PFCR query reported in userspace coincides with the
kernel reported function list. Right now we don't mask the functions
in the kernel so they have to be the same.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-5-brueckner@linux.ibm.com
[frankja@linux.ibm.com: Added commit description]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-5-brueckner@linux.ibm.com>
This patch fixes a NULL pointer dereference bug in brcmfmac that occurs
when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs
are sent from the pkt queue.
The problem is the number of entries in the pre-allocated sgtable, it is
nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1.
Given the default [rt]xglom_size=32 it's actually 35 which is too small.
Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB
is added for each original SKB if tailroom isn't enough to hold tail_pad.
At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop"
in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return
NULL and this causes the oops.
The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle
the worst-case.
Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464
additional bytes of memory.
Signed-off-by: Norbert van Bolhuis <nvbolhuis@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241107132903.13513-1-nvbolhuis@gmail.com
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/net/wireless to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
En passant several whitespace changes are done to make indentation
consistent in the struct initializers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241106170706.38922-2-u.kleine-koenig@baylibre.com
This patch fixes incorrect code alignment.
./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:871:2-3: code aligned with following code on line 882.
./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:886:2-3: code aligned with following code on line 900.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11381
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241101060725.54640-1-jiapeng.chong@linux.alibaba.com
Add gen17 facilities and let KVM_CAP_S390_VECTOR_REGISTERS handle
the enablement of the vector extension facilities.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-4-brueckner@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-4-brueckner@linux.ibm.com>
Adding support for concurrent-functions facility which provides
additional subfunctions.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-2-brueckner@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-2-brueckner@linux.ibm.com>
The fixed patch introduced an additional condition to enter the scope
where the 'root' device_node is released (!settings->board_type,
currently 'err'), which avoid decrementing the refcount with a call to
of_node_put() if that second condition is not satisfied.
Move the call to of_node_put() to the point where 'root' is no longer
required to avoid leaking the resource if err is not zero.
Cc: stable@vger.kernel.org
Fixes: 7682de8b33 ("wifi: brcmfmac: of: Fetch Apple properties")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241030-brcmfmac-of-cleanup-v1-1-0b90eefb4279@gmail.com
Checkpatch thinks that we're doing a multiplication but we're obviously
not. Fix 4 instances where we adhered to wrong checkpatch advice.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107141024.238916-5-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-5-schlameuss@linux.ibm.com>
Add a test case verifying KVM_SET_USER_MEMORY_REGION and
KVM_SET_USER_MEMORY_REGION2 cannot be executed on ucontrol VMs.
Executing this test case on not patched kernels will cause a null
pointer dereference in the host kernel.
This is fixed with commit:
commit 7816e58967 ("kvm: s390: Reject memory region operations for ucontrol VMs")
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107141024.238916-4-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-4-schlameuss@linux.ibm.com>
Add a test case manipulating s390 storage keys from within the ucontrol
VM.
Storage key instruction (ISKE, SSKE and RRBE) intercepts and
Keyless-subset facility are disabled on first use, where the skeys are
setup by KVM in non ucontrol VMs.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20241108091620.289406-1-schlameuss@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241108091620.289406-1-schlameuss@linux.ibm.com>
Add a test case verifying basic running and interaction of ucontrol VMs.
Fill the segment and page tables for allocated memory and map memory on
first access.
* uc_map_unmap
Store and load data to mapped and unmapped memory and use pic segment
translation handling to map memory on access.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link:
https://lore.kernel.org/r/20241107141024.238916-2-schlameuss@linux.ibm.com
[frankja@linux.ibm.com: Fixed patch prefix]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107141024.238916-2-schlameuss@linux.ibm.com>
By using the printk_force_console the loglevel workaround can be removed.
The workaround existed to always send the sysrq header message to all
consoles not matter what was the current loglevel, but it won't work for
deferred messages, since the loglevel can be restore before the message
is printed, suppressing the message that wasn't supposed to be
suppressed by the workaround.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20241105-printk-loud-con-v2-2-bd3ecdf7b0e4@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Introduce FORCE_CON flag to printk. The new flag will make it possible to
create a context where printk messages will never be suppressed.
This mechanism will be used in the next patch to create a force_con
context on sysrq handling, removing an existing workaround on the
loglevel global variable. The workaround existed to make sure that sysrq
header messages were sent to all consoles, but this doesn't work with
deferred messages because the loglevel might be restored to its original
value before a console flushes the messages.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20241105-printk-loud-con-v2-1-bd3ecdf7b0e4@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
This codec only has one set of left and right DACs, remove the duplicate
DACs with duplicated bits controlling them as the userspace can set those
controls to mismatched value. This most likely does break userspace ABI,
but there seem to be no in-kernel users.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20241108235453.196289-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
1. Added clocking details.
2. Updated ways to register the dai's
3. Bit more detail about card registration details.
Signed-off-by: anish kumar <yesanishhere@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/20241109192231.11623-1-yesanishhere@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a quirk to include the codec amplifier function for this
Dell SKU.
Note: In this SKU '0CF1', the RT722 codec amplifier is
excluded, and an external amplifier is used instead.
Signed-off-by: Deep Harsora <deep_harsora@dell.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241111070618.5414-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio graph card doesn't mark its subnodes such as multi {}, dpcm {}
and c2c {} as not requiring any suppliers. This causes a hang as Linux
waits for these phantom suppliers to show up on boot.
Make it clear these nodes have no suppliers.
Example error message:
[ 15.208558] platform 2034000.i2s: deferred probe pending: platform: wait for supplier /sound/multi
[ 15.208584] platform sound: deferred probe pending: asoc-audio-graph-card2: parse error
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241108-graph_dt_fix-v1-1-173e2f9603d6@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmcxMXceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1IgH/A3O7KIy/VR7D7O3
usbLqk1V+YWs/NsVdewEL/SYfXjCxqnejdk/AvN3ZAIxFeMHhAmcSCKno3zKgK9L
ML4kDrz22dPlA0XncNM8qKTCqAMgXTur1wafv3NAjutg0D3eHvAp0BW0GO5px93G
+kt3kOY32UaB+2Fl1GIub777pRi5U4u5AboQTu3x0TdRZJtV1pqgeddGoymNn6mi
xmMVbY3r5MXJQyHntoT9FIuxK3d+jGcgRHP5RWr53+vAUEFdlXiGcJV4dUXsuQNa
sEKJutCaUqQeiamjoo4bRZO7/2OAPX9Sv7sNIXD/irZZJmCcWr+GDCcUmL69Mjg7
7mx6XrM=
=HYUx
-----END PGP SIGNATURE-----
Merge tag 'v6.12-rc7' into __tmp-hansg-linux-tags_media_atomisp_6_13_1
Linux 6.12-rc7
* tag 'v6.12-rc7': (1909 commits)
Linux 6.12-rc7
filemap: Fix bounds checking in filemap_read()
i2c: designware: do not hold SCL low when I2C_DYNAMIC_TAR_UPDATE is not set
mailmap: add entry for Thorsten Blum
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
signal: restore the override_rlimit logic
fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
ucounts: fix counter leak in inc_rlimit_get_ucounts()
selftests: hugetlb_dio: check for initial conditions to skip in the start
mm: fix docs for the kernel parameter ``thp_anon=``
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
mm/damon/core: handle zero schemes apply interval
mm/damon/core: handle zero {aggregation,ops_update} intervals
mm/mlock: set the correct prev on failure
objpool: fix to make percpu slot allocation more robust
mm/page_alloc: keep track of free highatomic
bcachefs: Fix UAF in __promote_alloc() error path
bcachefs: Change OPT_STR max to be 1 less than the size of choices array
bcachefs: btree_cache.freeable list fixes
bcachefs: check the invalid parameter for perf test
...
Major changes are listed:
rtw88:
- support two USB adapters 8821au and 8812au
rtw89:
- add thermal protection
- fine tune BT-coexsitence to improve user experience
- firmware secure boot for WiFi 6 chip
- more materials for MLO
-----BEGIN PGP SIGNATURE-----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=7ogU
-----END PGP SIGNATURE-----
Merge tag 'rtw-next-2024-11-06' of https://github.com/pkshih/rtw
rtw-next patches for v6.13
Major changes are listed:
rtw88:
- support two USB adapters 8821au and 8812au
rtw89:
- add thermal protection
- fine tune BT-coexsitence to improve user experience
- firmware secure boot for WiFi 6 chip
- more materials for MLO
pcim_iomap_table() and pcim_request_regions() have been deprecated in
e354bb84a4 ("PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()") and
d140f80f60 ("PCI: Deprecate pcim_iomap_regions() in favor of pcim_iomap_region()"),
respectively.
Replace these functions with pcim_iomap_region().
Additionally, pass the actual driver name to pcim_iomap_region() instead of
the previous pci_name(), since the @name parameter should always reflect which
driver owns a region.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241111103602.16615-2-pstanner@redhat.com
On x86_64, with allmodconfig, struct uprobe_task is 72 bytes long, with a
hole and some padding.
/* size: 72, cachelines: 2, members: 7 */
/* sum members: 64, holes: 1, sum holes: 4 */
/* padding: 4 */
/* forced alignments: 1, forced holes: 1, sum forced holes: 4 */
/* last cacheline: 8 bytes */
Reorder the structure to fill the hole and avoid the padding.
This way, the whole structure fits in a single cacheline and some memory is
saved when it is allocated.
/* size: 64, cachelines: 1, members: 7 */
/* forced alignments: 1 */
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/a9f541d0cedf421f765c77a1fb93d6a979778a88.1730495562.git.christophe.jaillet@wanadoo.fr
Add mising braces after an if condition that contains scoped_guard().
This style is both preferred and necessary here, to fix warning after
scoped_guard() change in commit fcc22ac5ba ("cleanup: Adjust
scoped_guard() macros to avoid potential warning") to have if-else inside
of the macro. Current (no braces) use in af8133j_set_scale() yields
the following warnings:
af8133j.c:315:12: warning: suggest explicit braces to avoid ambiguous 'else' [-Wdangling-else]
af8133j.c:316:3: warning: add explicit braces to avoid dangling else [-Wdangling-else]
Fixes: fcc22ac5ba ("cleanup: Adjust scoped_guard() macros to avoid potential warning")
Closes: https://lore.kernel.org/oe-kbuild-all/202409270848.tTpyEAR7-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20241108154258.21411-1-przemyslaw.kitszel@intel.com
Fix the following warning:
CC [M] arch/x86/events/amd/uncore.o
arch/x86/events/amd/uncore.c: In function ‘amd_uncore_umc_ctx_init’:
arch/x86/events/amd/uncore.c:951:52: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 8 [-Wformat-truncation=]
snprintf(pmu->name, sizeof(pmu->name), "amd_umc_%d", index);
^~
arch/x86/events/amd/uncore.c:951:43: note: directive argument in the range [0, 2147483647]
snprintf(pmu->name, sizeof(pmu->name), "amd_umc_%d", index);
^~~~~~~~~~~~
arch/x86/events/amd/uncore.c:951:4: note: ‘snprintf’ output between 10 and 19 bytes into a destination of size 16
snprintf(pmu->name, sizeof(pmu->name), "amd_umc_%d", index);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As far as I can see, there can't be more than UNCORE_GROUP_MAX (256)
groups and each group can't have more than 255 PMU, so the number
printed by this %d can't exceed 65279, that's only 5 digits and would
fit into the buffer. So it's a false positive warning. But we can
make the compiler happy by declaring index as a 16-bit number.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20241105095253.18f34b4d@endymion.delvare
When PREEMPT_RT=y, spin locks are mapped to rt_mutex types, so using
spinlock_check() + __raw_spin_lock_init() to initialize spin locks is
incorrect, and would cause build errors.
Introduce __spin_lock_init() to initialize a spin lock with lockdep
rquired information for PREEMPT_RT builds, and use it in the Rust
helper.
Fixes: d2d6422f8b ("x86: Allow to enable PREEMPT_RT.")
Closes: https://lore.kernel.org/oe-kbuild-all/202409251238.vetlgXE9-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241107163223.2092690-2-ezulian@redhat.com
Add the "Lazy" part to the comment for TIF_NEED_RESCHED_LAZY so it is
not the same as TIF_NEED_RESCHED.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241106162449.sk6rDddk@linutronix.de
For some, as of yet unexplained reason, Clang-19, but not GCC,
generates and endless stream of:
drivers/iio/imu/bno055/bno055_ser.o: warning: objtool: __tracepoint_send_chunk+0x20: data relocation to !ENDBR: __SCT__tp_func_send_chunk+0x0
drivers/iio/imu/bno055/bno055_ser.o: warning: objtool: __tracepoint_cmd_retry+0x20: data relocation to !ENDBR: __SCT__tp_func_cmd_retry+0x0
drivers/iio/imu/bno055/bno055_ser.o: warning: objtool: __tracepoint_write_reg+0x20: data relocation to !ENDBR: __SCT__tp_func_write_reg+0x0
drivers/iio/imu/bno055/bno055_ser.o: warning: objtool: __tracepoint_read_reg+0x20: data relocation to !ENDBR: __SCT__tp_func_read_reg+0x0
drivers/iio/imu/bno055/bno055_ser.o: warning: objtool: __tracepoint_recv+0x20: data relocation to !ENDBR: __SCT__tp_func_recv+0x0
Which is entirely correct, but harmless. Add the __tracepoints section
to the exclusion list.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241108184618.GG38786@noisy.programming.kicks-ass.net
Without remove hook to clear wake irq, there will be kernel dump when
doing module test.
"bbnsm_rtc 44440000.bbnsm:rtc: wake irq already initialized"
Add remove hook to clear wake irq and set wakeup to false.
Fixes: eb7b85853c ("rtc: bbnsm: Add the bbnsm rtc support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20241111071130.1099978-1-peng.fan@oss.nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Commit d35df77707 ("mtd: spi-nor: winbond: fix w25q128 regression")
upstream fixed a regression for flavors of 0xef4018 flash that don't
define SFDP tables. Add a comment on the flash definition highlighting
that there are flavors of flashes with and without SFDP support.
It spares developers searching the entire git log for when we'll better
handle these cases.
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20241029080049.96679-1-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Introduce ovl_revert_creds() wrapper of revert_creds() to
match callers of ovl_override_creds().
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
As the credentials used by backing-file are long lived in relation to
the critical section (override_creds() -> revert_creds()) we can
replace them by their lighter alternatives.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Add a light version of override/revert_creds(), this should only be
used when the credentials in question will outlive the critical
section and the critical section doesn't change the ->usage of the
credentials.
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
- Pass iocb to ctx->end_write() instead of file + pos
- Get rid of ctx->user_file, which is redundant most of the time
- Instead pass iocb to backing_file_splice_read and
backing_file_splice_write
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
dentry_open in ovl_security_fileattr fails for any file
larger than 2GB if open method of the underlying filesystem
calls generic_file_open (e.g. fusefs).
The issue can be reproduce using the following script:
(passthrough_ll is an example app from libfuse).
$ D=/opt/test/mnt
$ mkdir -p ${D}/{source,base,top/uppr,top/work,ovlfs}
$ dd if=/dev/zero of=${D}/source/zero.bin bs=1G count=2
$ passthrough_ll -o source=${D}/source ${D}/base
$ mount -t overlay overlay \
-olowerdir=${D}/base,upperdir=${D}/top/uppr,workdir=${D}/top/work \
${D}/ovlfs
$ chmod 0777 ${D}/mnt/ovlfs/zero.bin
Running this script results in "Value too large for defined data type"
error message from chmod.
Signed-off-by: Oleksandr Tymoshenko <ovt@google.com>
Fixes: 72db82115d ("ovl: copy up sync/noatime fileattr flags")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
As Documentation/filesystems/sysfs.rst suggested, show() should only use
sysfs_emit() or sysfs_emit_at() when formatting the value to be returned
to user space.
Link: https://lkml.kernel.org/r/20241029101853.37890-1-zhangguopeng@kylinos.cn
Signed-off-by: zhangguopeng <zhangguopeng@kylinos.cn>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This tracepoint gives visibility on how often the flushing of memcg stats
occurs and contains info on whether it was forced, skipped, and the value
of stats updated. It can help with understanding how readers are affected
by having to perform the flush, and the effectiveness of the flush by
inspecting the number of stats updated. Paired with the recently added
tracepoints for tracing rstat updates, it can also help show correlation
where stats exceed thresholds frequently.
Link: https://lkml.kernel.org/r/20241029021106.25587-3-inwardvessel@gmail.com
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
