IEEE1588(ptp) is optional feature for network. Remove it from required
list to fix below CHECK_DTBS warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: ethernet@f0000: 'ptp-timer' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
ice: prepare representor for SF support
Michal Swiatkowski says:
This is a series to prepare port representor for supporting also
subfunctions. We need correct devlink locking and the possibility to
update parent VSI after port representor is created.
Refactor how devlink lock is taken to suite the subfunction use case.
VSI configuration needs to be done after port representor is created.
Port representor needs only allocated VSI. It doesn't need to be
configured before.
VSI needs to be reconfigured when update function is called.
The code for this patchset was split from (too big) patchset [1].
[1] https://lore.kernel.org/netdev/20240213072724.77275-1-michal.swiatkowski@linux.intel.com/
---
Originally from https://lore.kernel.org/netdev/20240605-next-2024-06-03-intel-next-batch-v2-0-39c23963fa78@intel.com/
Changes:
- delete ice_repr_get_by_vsi() from header
- rephrase commit message in moving devlink locking
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Apparently there was never a maintainers entry for the ARM Alphascale
ASM9260 SoC, thus patches end up nowhere. Add such entry, because even
if platform is orphaned and on its way out of the kernel, it is nice to
take patches if someone sends something.
I do not plan to actively support/maintain ARM Alphascale but I can take
odd fixes now and then.
Cc: Oleksij Rempel <linux@rempel-privat.de>
Link: https://lore.kernel.org/r/20240612141018.7348-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The watchdog appears to be an ARM SP805, add the full compatible
and the needed clocks properties. Leave this disabled for now
as functionality is not fully tested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240612151314.27967-2-afd@ti.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes the following DTB check warning:
> node has a reg or ranges property, but no unit name
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240612151314.27967-1-afd@ti.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Apparently there was never a maintainers entry for the ARM Texas
Instruments Nspire SoC, thus patches end up nowhere. Add such entry,
because even if platform is orphaned and on its way out of the kernel,
it is nice to take patches if someone sends something.
I do not plan to actively support/maintain Nspire platform but I can
take odd fixes now and then.
Cc: Daniel Tang <dt.tangr@gmail.com>
Cc: Andrew Davis <afd@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240612141740.8470-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The ARM VIA/WonderMedia VT8500 platform became orphaned in
commit 8f1b7ba55c ("MAINTAINERS: ARM/VT8500, remove defunct e-mail")
and clearly it is on the way out of the kernel. However few folks send
patches to it and it is nice to actually take them, till the platform is
in the kernel.
Alexey Charkov still has VT8500 hardware and plans to work on upstream,
so add Alexey as the maintainer. Krzysztof will collect patches.
Extend the maintainer entry to cover also VT8500 DTS.
Cc: Alexey Charkov <alchark@gmail.com>
Acked-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20240613064612.8589-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
There is no maintainers entry for the ARM LSI AXM SoC, thus patches end
up nowhere. Add such entry, because even if platform is orphaned and on
its way out of the kernel, it is nice to take patches if someone sends
something.
I do not plan to actively support/maintain AXM but I can take odd fixes
now and then.
Link: https://lore.kernel.org/r/20240613134910.7862-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
There is no maintainers entry for the ARM MOXA ART SoC, thus patches end
up nowhere. Add such entry, because even if platform is orphaned and on
its way out of the kernel, it is nice to take patches if someone sends
something.
I do not plan to actively support/maintain MOXA but I can take odd fixes
now and then.
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Link: https://lore.kernel.org/r/20240613135956.8899-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The errata DS80000754 recommends monitoring potential faults in
half-duplex mode for the KSZ9477 family.
half-duplex is not very common so I just added a critical message
when the fault conditions are detected. The switch can be expected
to be unable to communicate anymore in these states and a software
reset of the switch would be required which I did not implement.
Fixes: b987e98e50 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Errata DS80000758 states that carrier sense back pressure mode can cause
link down issues in 100BASE-TX half duplex mode. The datasheet also
recommends to always use the collision based back pressure mode.
Fixes: b987e98e50 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Woojung Huh <Woojung.huh@microchip.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
PHY_ID_KSZ9477 was supported but not added to the device table passed to
MODULE_DEVICE_TABLE.
Fixes: fc3973a1fa ("phy: micrel: add Microchip KSZ 9477 Switch PHY support")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not all PSE attributes are used for the pse-set netlink command.
Select only the ones used by ethtool.
Fixes: f8586411e4 ("netlink: specs: Expand the pse netlink command with PoE interface")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
platform_get_resource() and devm_ioremap_resource() are wrapped up in the
devm_platform_ioremap_resource() helper. Use the helper and get rid of the
local variable for struct resource *.
Signed-off-by: Jai Arora <jai.arora@samsung.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240618110226.97395-1-jai.arora@samsung.com
It’s better to avoid long sleeps right from the beginning of the polling
since the data may be available much sooner than the sleep period.
Because polling host memory is inexpensive, this change gradually
increases the sleep time up to the user-requested period.
Signed-off-by: Didi Freiman <dfreiman@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
The device heartbeat work is currently initialized at
device_heartbeat_schedule() which is called at the end of
hl_device_init().
However hl_device_init() can fail at a previous step, and in such a
case, a subsequent call to hl_device_fini() will lead to calling
cleanup_resources() and accessing this work uninitialized.
As there is no real need to re-initialize this work every time it is
rescheduled, move this initialization to device_early_init() to be done
once and early enough.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
The test packet which is sent to FW for the PQ heartbeat is used also as
the trigger in FW to send the EQ heartbeat event.
Add the time of the last sent packet to the debug info which is printed
upon a EQ heartbeat failure.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Add a dump of the EQ entries headers upon a EQ heartbeat failure.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Don't print the "previous EQ index" value in case of a EQ heartbeat
failure, because it is incremented along with the EQ CI and therefore
redundant.
In addition, as the CPU-CP PI is zeroed when it reaches a value that is
twice the queue size, add a value of the CI with a similar wrap around,
to make it easier to compare the values.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
In order to have better debuggability upon encountering FW issues,
We are adding additional info once CPU packet timeout expires.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
When device release triggers a hard reset, there is a printout of
the cause. Currently listed causes (that increment context refcount)
are active command submissions and exported DMA buffer objects. In
any other case, the printout emits "unknown reason". We identify and
print another reason - allocated command buffers.
Signed-off-by: Ilia Levi <illevi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Because I left habana, Ofir Bitton is now the habanalabs driver
maintainer.
The git repo also changed location to the Habana GitHub website.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Some systems allow a maximum number of 128 MSI-X interrupts.
Hence we reduce the interrupt count to 128 instead of 512.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
When sending disable pci msg towards firmware, there is a
possibility that an EQ packet is already pending,
disabling EQ interrupt will prevent this from happening.
The interrupt will be re-enabled after reset.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Currently we schedule the heartbeat thread at late init, only then
we set the INTS_REGISTER packet which enables events to be received
from firmware.
Init may take some time and we want to give firmware 2 full cycles of
heartbeat thread after it received INTS_REGISTER.
The patch will move the heartbeat thread scheduling to be after driver
is done with all initializations.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Netowrk EDMAs uses more outstanding transfers so this needs to be
programmed by EDMA firmware.
Signed-off-by: Rakesh Ughreja <rughreja@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
There are several timestamp registration debug prints which
spams the kernel log whenever dyn debug is enabled.
Remove those prints.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Add cpld_timestamp field to cpucp_info structure and return cpld
timestamp as part of cpld version
Signed-off-by: Vitaly Margolin <vmargolin@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
As the new dynamic EQ includes clock change events which are common and
not ASIC-specific, add a common handler for these events.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
The device debugfs directory was modified to be named as the parent
device name.
Update the description of 'mmu' and 'mmu_error' to use the new path.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Gaudi2 with PCI revision ID with the value of '4' represents Gaudi2D
device and should be detected and initialized as Gaudi2.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
hl_eq_heartbeat_event_handle() doesn't have ASIC specific code, and
therefore can be moved from Gaudi2-only code to common code, and
possibly used for other ASICs.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Future supported ASICs might use the dynamic EQ mechanism with the
firmware, and in that case the EQ size won't be equal to the default
HL_EQ_SIZE_IN_BYTES value.
Add an ASIC property to enable overriding this value.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
In struct cpucp_packet both nonce and data_max_size members are in an
union overlapping each other. This is a problem as they both are used
in attestation and info_signed packets.
The solution here is to move the nonce member to a different union under
the same structure.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
FW initiates a hard reset upon an MC SEI severe error.
Align the driver to expect this reset and avoid accessing the device
until the reset is done.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
The return value in gaudi2_hbm_sei_handle_read_err() is boolean and not
a bitmask, so there is need for "|= true".
In addition, rename the 'rc' variable, as no "return code" is returned
here but an indication if a hard reset is required.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
when reporting tpc events, the dcore and tpc in dcore should
be reported and propagated, and not the generatl tpc number
Signed-off-by: Ariel Suller <asuller@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Driver should check and report any fatal errors detected by preboot,
before it attempts to load the boot fit.
Some errors may cause the driver to stop the boot process and mark
the device as unusable.
This check will allow the driver to fail and print the error reported
by preboot and skip the time wasting attempt of trying to load the
boot fit, which will fail due to the error.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Struct comms_desc_header is deprecated and replaced by struct
comms_msg_header. As a preparation for removing comms_desc_header
from FW, all it's usage in code is replaced by comms_msg_header.
Signed-off-by: Igal Zeltser <izeltser@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
It is hard to debug the reason for heartbeat check failures.
As an attempt to ease this task, this patch will provide more
information when this failure happens.
Heartbeat checks the communication with FW, so printing
the CPU queue pi/ci and the counter of how many times that event
was received would help in debugging the issue.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
This addition helps log parsers better define the error without the need
to go back and search the device name on former log lines.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Exposing server type through debugfs to enable easier access via
scripts.
Signed-off-by: Tal Risin <trisin@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Trace events might still be recorded after the accel device is released,
while the device name is no longer available.
Modify the trace functions to use the parent device instead, which is
available at that point and still informative as the device name.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
If we detected heartbet event while some daemon in the background send
(via driver interface) CPUCP messages the dmesg will be flooded.
Instead, a slight refactor in hl_fw_send_cpu_message() returns -EAGAIN
when CPU is disabled (i.e. heartbeat failure) and only then.
Later, all calling functions that may be invoked by user space can issue
prints only if the error code is not -EAGAIN.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
The function returned an error code which isn't propagated up the stack
(nor is it printed).
The return value is only checked for =0 or !=0 which implies bool return
value.
The function signature is updated accordingly, renamed, and slightly
refactored.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
The extra info will help in better traceability and debug.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Currently, the code contains 2 types of FW version comparison functions:
- hl_is_fw_sw_ver_[below/equal_or_greater]()
- gaudi2 specific function of the type
gaudi2_is_fw_ver_[below/above]x_y_z()
Moreover, some functions use the inner FW version which shuold be only
stage during development but not version dependencies.
Finally, some tests are done to deprecated FW version to which LKD
should hold no compatibility.
This commit aligns all APIs to a single function that just compares the
version and return an integers indicator (similar in some way to
strcmp()).
In addition, this generic function now considers also the sub-minor FW
version and also remove dead code resulting in deprecated FW versions
compatibility.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>