Commit graph

1,323,830 commits

Author SHA1 Message Date
Johan Jonker
a119aec5bf net: ethernet: arc: remove emac_arc driver
The last real user nSIM_700 of the "snps,arc-emac" compatible string in
a driver was removed in 2019. The use of this string in the combined DT of
rk3066a/rk3188 as place holder has also been replaced, so
remove emac_arc.c to clean up some code.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-21 10:07:17 +01:00
Johan Jonker
a8bd4d7af7 ARM: dts: rockchip: rk3xxx: fix emac node
In the combined DT of rk3066a/rk3188 the emac node uses as place holder
the compatible string "snps,arc-emac". The last real user nSIM_700
of the "snps,arc-emac" compatible string in a driver was removed in 2019.
Rockchip emac nodes don't make use of this common fall back string.
In order to removed unused driver code replace this string with
"rockchip,rk3066-emac".
As we are there remove the blank lines and sort.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-21 10:07:17 +01:00
Vitor Soares
d8fb63e46c can: mcp251xfd: fix infinite loop when xmit fails
When the mcp251xfd_start_xmit() function fails, the driver stops
processing messages, and the interrupt routine does not return,
running indefinitely even after killing the running application.

Error messages:
[  441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16
[  441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3).
... and repeat forever.

The issue can be triggered when multiple devices share the same SPI
interface. And there is concurrent access to the bus.

The problem occurs because tx_ring->head increments even if
mcp251xfd_start_xmit() fails. Consequently, the driver skips one TX
package while still expecting a response in
mcp251xfd_handle_tefif_one().

Resolve the issue by starting a workqueue to write the tx obj
synchronously if err = -EBUSY. In case of another error, decrement
tx_ring->head, remove skb from the echo stack, and drop the message.

Fixes: 55e5b97f00 ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Cc: stable@vger.kernel.org
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Link: https://lore.kernel.org/all/20240517134355.770777-1-ivitro@gmail.com
[mkl: use more imperative wording in patch description]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 10:50:20 +02:00
Chen Ni
0d34d8163f can: kvaser_usb: fix return value for hif_usb_send_regout
As the potential failure of usb_submit_urb(), it should be better to
return the err variable to catch the error.

Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/all/20240521041020.1519416-1-nichen@iscas.ac.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 10:50:20 +02:00
Oleksij Rempel
9ad1da14ab net: can: j1939: recover socket queue on CAN bus error during BAM transmission
Addresses an issue where a CAN bus error during a BAM transmission
could stall the socket queue, preventing further transmissions even
after the bus error is resolved. The fix activates the next queued
session after the error recovery, allowing communication to continue.

Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: stable@vger.kernel.org
Reported-by: Alexander Hölzl <alexander.hoelzl@gmx.net>
Tested-by: Alexander Hölzl <alexander.hoelzl@gmx.net>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20240528070648.1947203-1-o.rempel@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 10:50:17 +02:00
Shigeru Yoshida
b7cdf1dd5d net: can: j1939: Initialize unused data in j1939_send_one()
syzbot reported kernel-infoleak in raw_recvmsg() [1]. j1939_send_one()
creates full frame including unused data, but it doesn't initialize
it. This causes the kernel-infoleak issue. Fix this by initializing
unused data.

[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline]
BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185
 instrument_copy_to_user include/linux/instrumented.h:114 [inline]
 copy_to_user_iter lib/iov_iter.c:24 [inline]
 iterate_ubuf include/linux/iov_iter.h:29 [inline]
 iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
 iterate_and_advance include/linux/iov_iter.h:271 [inline]
 _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185
 copy_to_iter include/linux/uio.h:196 [inline]
 memcpy_to_msg include/linux/skbuff.h:4113 [inline]
 raw_recvmsg+0x2b8/0x9e0 net/can/raw.c:1008
 sock_recvmsg_nosec net/socket.c:1046 [inline]
 sock_recvmsg+0x2c4/0x340 net/socket.c:1068
 ____sys_recvmsg+0x18a/0x620 net/socket.c:2803
 ___sys_recvmsg+0x223/0x840 net/socket.c:2845
 do_recvmmsg+0x4fc/0xfd0 net/socket.c:2939
 __sys_recvmmsg net/socket.c:3018 [inline]
 __do_sys_recvmmsg net/socket.c:3041 [inline]
 __se_sys_recvmmsg net/socket.c:3034 [inline]
 __x64_sys_recvmmsg+0x397/0x490 net/socket.c:3034
 x64_sys_call+0xf6c/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:300
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Uninit was created at:
 slab_post_alloc_hook mm/slub.c:3804 [inline]
 slab_alloc_node mm/slub.c:3845 [inline]
 kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888
 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577
 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668
 alloc_skb include/linux/skbuff.h:1313 [inline]
 alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504
 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795
 sock_alloc_send_skb include/net/sock.h:1842 [inline]
 j1939_sk_alloc_skb net/can/j1939/socket.c:878 [inline]
 j1939_sk_send_loop net/can/j1939/socket.c:1142 [inline]
 j1939_sk_sendmsg+0xc0a/0x2730 net/can/j1939/socket.c:1277
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg+0x30f/0x380 net/socket.c:745
 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584
 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
 __sys_sendmsg net/socket.c:2667 [inline]
 __do_sys_sendmsg net/socket.c:2676 [inline]
 __se_sys_sendmsg net/socket.c:2674 [inline]
 __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674
 x64_sys_call+0xc4b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:47
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Bytes 12-15 of 16 are uninitialized
Memory access of size 16 starts at ffff888120969690
Data copied to user address 00000000200017c0

CPU: 1 PID: 5050 Comm: syz-executor198 Not tainted 6.9.0-rc5-syzkaller-00031-g71b1543c83d6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024

Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Reported-and-tested-by: syzbot+5681e40d297b30f5b513@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5681e40d297b30f5b513
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/all/20240517035953.2617090-1-syoshida@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 10:50:15 +02:00
Oleksij Rempel
d3e2904f71 net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new
This patch enhances error handling in scenarios with RTS (Request to
Send) messages arriving closely. It replaces the less informative WARN_ON_ONCE
backtraces with a new error handling method. This provides clearer error
messages and allows for the early termination of problematic sessions.
Previously, sessions were only released at the end of j1939_xtp_rx_rts().

Potentially this could be reproduced with something like:
testj1939 -r vcan0:0x80 &
while true; do
	# send first RTS
	cansend vcan0 18EC8090#1014000303002301;
	# send second RTS
	cansend vcan0 18EC8090#1014000303002301;
	# send abort
	cansend vcan0 18EC8090#ff00000000002301;
done

Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Reported-by: syzbot+daa36413a5cedf799ae4@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20231117124959.961171-1-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 10:50:14 +02:00
Daniel Wagner
28beb730ee tools: build: use correct lib name for libtracefs feature detection
Use libtracefs as package name to lookup the CFLAGS for libtracefs. This
makes it possible to use the distro specific path as include path for
the header file.

Link: https://lkml.kernel.org/r/20240617-rtla-build-v1-1-6882c34678e8@suse.de

Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-06-21 10:28:06 +02:00
Jiaxun Yang
77543269ff MIPS: Loongson64: env: Hook up Loongsson-2K
Somehow those enablement bits were left over when we were
adding initial Loongson-2K support.

Set up basic information and select proper builtin DTB for
Loongson-2K.

Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-06-21 10:22:10 +02:00
Jiaxun Yang
335819fd5b MIPS: Loongson64: sleeper: Pass ra and sp as arguments
Some firmware implementations require restoring ra and sp to be
passed as arguments.

Passing them as necessary.

Fixes: 68557c59a5 ("MIPS: Loongson64: Implement PM suspend for LEFI firmware")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-06-21 10:22:10 +02:00
Jiaxun Yang
4e7ca0b57f MIPS: Loongson64: reset: Prioritise firmware service
We should always use firmware's poweroff & reboot service
if it's available as firmware may need to perform more task
than platform's syscon etc.

However _machine_restart & poweroff hooks are registered at
low priority, which means platform reboot driver can override
them.

Register firmware based reboot/poweroff implementation with
register_sys_off_handler with appropriate priority so that
they will be prioritised. Remove _machine_halt hook as it's
deemed to be unnecessary.

Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-06-21 10:22:10 +02:00
Jiaxun Yang
f4d430db17 platform: mips: cpu_hwmon: Disable driver on unsupported hardware
cpu_hwmon is unsupported on CPUs without loongson_chiptemp
register and csr.

Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-06-21 10:22:10 +02:00
Jiaxun Yang
c04366b120 MIPS: Loongson64: Test register availability before use
Some global register address variable may be missing on
specific CPU type, test them before use them.

Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-06-21 10:22:10 +02:00
Jiaxun Yang
da3f62466e MIPS: dts: loongson: Add ISA node
ISA node is required by Loongson64 platforms to initialize
PIO support.

Kernel will hang at boot without ISA node.

Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-06-21 10:22:10 +02:00
Jiaxun Yang
813c18d1ca MIPS: dts: loongson: Fix GMAC phy node
phy-mode should be rgmii-id to match hardware configuration.

Also there should be a phy-handle to reference phy node.

Fixes: f8a1142507 ("MIPS: Loongson64: Add GMAC support for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-06-21 10:22:09 +02:00
Jiaxun Yang
f70fd92df7 MIPS: dts: loongson: Fix ls2k1000-rtc interrupt
The correct interrupt line for RTC is line 8 on liointc1.

Fixes: e47084e116 ("MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-06-21 10:22:09 +02:00
Jiaxun Yang
dbb69b9d62 MIPS: dts: loongson: Fix liointc IRQ polarity
All internal liointc interrupts are high level triggered.

Fixes: b1a792601f ("MIPS: Loongson64: DeviceTree for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-06-21 10:22:09 +02:00
Jiaxun Yang
b81656c37a MIPS: Loongson64: Remove memory node for builtin-dtb
Builtin DTBS should never contain memory node as memory is
going to be managed by LEFI interface.

Remove memory node to prevent confliction.

Fixes: b1a792601f ("MIPS: Loongson64: DeviceTree for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-06-21 10:22:09 +02:00
Luis Claudio R. Goncalves
587f05a88b rtla/osnoise: Better report when histogram is empty
When osnoise hist does not observe any samples above the threshold,
no entries are recorded and the final report shows empty entries
for the usual statistics (count, min, max, avg):

    [~]# osnoise hist -d 5s -T 500
    # RTLA osnoise histogram
    # Time unit is microseconds (us)
    # Duration:   0 00:00:05
    Index
    over:
    count:
    min:
    avg:
    max:

That could lead users to confusing interpretations of the results.

A simple solution is to report 0 for count and the statistics, making it
clear that no noise (above the defined threshold) was observed:

    [~]# osnoise hist -d 5s -T 500
    # RTLA osnoise histogram
    # Time unit is microseconds (us)
    # Duration:   0 00:00:05
    Index
    over: 0
    count: 0
    min: 0
    avg: 0
    max: 0

Link: https://lkml.kernel.org/r/Zml6JmH5cbS7-HfZ@uudg.org

Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Reviewed-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-06-21 10:19:53 +02:00
Luis Claudio R. Goncalves
59237b0c96 rtla/osnoise: Use pretty formatting only on interactive tty
osnoise top performs background/font color formatting that could make
the text output confusing if not on a terminal. Use the changes from
commit f5c0cdad66 ("rtla/timerlat: Use pretty formatting only on
interactive tty") as an inspiration to fix this problem.

Apply the formatting only if running on a tty, and not in quiet mode.

Link: https://lkml.kernel.org/r/Zmb-yP_3EDHliI8Z@uudg.org

Suggested-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Reviewed-by: John Kacur <jkacur@redhat.com>
Reviewed-by: Clark Williams <williams@redhat.com>
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-06-21 10:17:51 +02:00
Arnd Bergmann
0d5679a0aa mips: fix compat_sys_lseek syscall
This is almost compatible, but passing a negative offset should result
in a EINVAL error, but on mips o32 compat mode would seek to a large
32-bit byte offset.

Use compat_sys_lseek() to correctly sign-extend the argument.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-06-21 10:16:34 +02:00
Jiaxun Yang
4a3e37b3ca MIPS: mipsmtregs: Fix target register for MFTC0
Target register of mftc0 should be __res instead of $1, this is
a leftover from old .insn code.

Fixes: dd6d29a614 ("MIPS: Implement microMIPS MT ASE helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-06-21 10:16:15 +02:00
Ivan Bornyakov
6aa0829104 media: chips-media: wave5: support Wave515 decoder
Add initial support for the Wave515 multi-decoder IP. For now it is only
able to decode HEVC Main/Main10 profile videos into YUV420.

This was tested on FPGA prototype, so wave5_dt_ids[] was not expanded.
Users of the real hardware with Wave515 IP will have to
 * provide firmware specific to their SoC
 * add struct wave5_match_data like this:

	static const struct wave5_match_data platform_name_wave515_data = {
		.flags = WAVE5_IS_DEC,
		.fw_name = "cnm/wave515_platform_name_fw.bin",
		.sram_size = (71 * 1024),
	};

 * add item to wave5_dt_ids[] like this:

	{
		.compatible = "vendor,soc-wave515",
		.data = &platform_name_wave515_data,
	},

 * describe new compatible in
   Documentation/devicetree/bindings/media/cnm,wave521c.yaml

Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-21 10:15:21 +02:00
Ivan Bornyakov
a83d4a689e media: chips-media: wave5: drop "sram-size" DT property
Move the excessive "sram-size" device-tree property to the device match
data. Also change the SRAM memory allocation strategy, instead of
allocating exactly sram_size bytes, allocate all available SRAM memory
up to sram_size. Add the placeholders wave5_vpu_dec_validate_sec_axi()
and wave5_vpu_enc_validate_sec_axi() to validate that the allocated SRAM
memory is sufficient to decode/encode bitstream with a given resolution.

Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-21 10:15:21 +02:00
Ivan Bornyakov
749476d44d media: chips-media: wave5: separate irq setup routine
Implement a separate setup routine for interrupts to reduce code
duplication. Also enable interrupts based on vpu_attr->support_encoders
and vpu_attr->support_decoders fields to facilitate support for other
Wave5xx IPs, because not all of them are both encoders and decoders.

Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-21 10:15:20 +02:00
Ivan Bornyakov
2b9188426b media: chips-media: wave5: support reset lines
Add initial support for optional reset lines. For now, simply deassert
resets while probing the driver and assert them back when removing the
driver.

Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-21 10:15:20 +02:00
Ivan Bornyakov
143e7ab4d9 media: chips-media: wave5: support decoding HEVC Main10 profile
Add support for decoding HEVC Main10 profile by scaling the FBC
buffer stride and size by a factor of (bitdepth / 8).

Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-21 10:15:20 +02:00
Martin Hundebøll
cd5a46ce6f can: m_can: don't enable transceiver when probing
The m_can driver sets and clears the CCCR.INIT bit during probe (both
when testing the NON-ISO bit, and when configuring the chip). After
clearing the CCCR.INIT bit, the transceiver enters normal mode, where it
affects the CAN bus (i.e. it ACKs frames). This can cause troubles when
the m_can node is only used for monitoring the bus, as one cannot setup
listen-only mode before the device is probed.

Rework the probe flow, so that the CCCR.INIT bit is only cleared when
upping the device. First, the tcan4x5x driver is changed to stay in
standby mode during/after probe. This in turn requires changes when
setting bits in the CCCR register, as its CSR and CSA bits are always
high in standby mode.

Signed-off-by: Martin Hundebøll <martin@geanix.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Tested-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240607105210.155435-1-martin@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:47:24 +02:00
Marc Kleine-Budde
3da74c5145 Merge patch series "can: hi311x: simplify with spi_get_device_match_data()"
Simplify SPI driver by making use of spi_get_device_match_data().

Link: https://lore.kernel.org/all/20240606142424.129709-1-krzysztof.kozlowski@linaro.org
[mkl: add intermediate cast to uintptr_t]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:47:18 +02:00
Krzysztof Kozlowski
9cdae370c4 can: mcp251xfd: simplify with spi_get_device_match_data()
Use spi_get_device_match_data() helper to simplify a bit the driver.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/20240606142424.129709-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:46:40 +02:00
Krzysztof Kozlowski
d4383d67a2 can: mcp251x: simplify with spi_get_device_match_data()
Use spi_get_device_match_data() helper to simplify a bit the driver.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/20240606142424.129709-2-krzysztof.kozlowski@linaro.org
[mkl: add intermediate cast to uintptr_t]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:46:39 +02:00
Krzysztof Kozlowski
1562a49d00 can: hi311x: simplify with spi_get_device_match_data()
Use spi_get_device_match_data() helper to simplify a bit the driver.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/20240606142424.129709-1-krzysztof.kozlowski@linaro.org
[mkl: add intermediate cast to uintptr_t]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:46:38 +02:00
Marc Kleine-Budde
3ba5caf39d Merge patch series "can: kvaser_pciefd: Support MSI interrupts"
Martin Jocic <martin.jocic@kvaser.com> says:

This patch series adds support for MSI interrupts. It depends on the
patch series can: kvaser_pciefd: Minor improvements and cleanups.

Link: https://lore.kernel.org/all/20240620181320.235465-1-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:46:34 +02:00
Martin Jocic
dd1f05ba2a can: kvaser_pciefd: Add MSI interrupts
Use MSI interrupts with fallback to INTx interrupts.

Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240620181320.235465-3-martin.jocic@kvaser.com
[mkl: kvaser_pciefd_probe(): call pci_free_irq_vectors() unconditionally]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:46:02 +02:00
Martin Jocic
48f827d4f4 can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR
A new interrupt is triggered by resetting the DMA RX buffers.
Since MSI interrupts are faster than legacy interrupts, the reset
of the DMA buffers must be moved to the very end of the ISR,
otherwise a new MSI interrupt will be masked by the current one.

Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240620181320.235465-2-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:46:00 +02:00
Marc Kleine-Budde
024452fd82 Merge patch series "can: kvaser_pciefd: Minor improvements and cleanups"
Martin Jocic <martin.jocic@kvaser.com> says:

Minor improvements and cleanups for the kvaser_pciefd driver
in preparation for an upcoming MSI interrupts patch series.

Link: https://lore.kernel.org/all/20240614151524.2718287-1-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:45:30 +02:00
Martin Jocic
26a1b0fe3f can: kvaser_pciefd: Change name of return code variable
Replace the variable name err used for return codes with the more
generic name ret. An upcoming patch series for adding MSI interrupts
will introduce code which also returns values other than return codes.
Renaming the variable to ret enables using it for both purposes.
This is applied to the whole file to make it consistent.

Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240614151524.2718287-8-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:45:28 +02:00
Martin Jocic
cbf88a6ba7 can: kvaser_pciefd: Rename board_irq to pci_irq
Rename the variable name board_irq in the ISR to pci_irq to
be more specific and to match the macro by which it is read.

Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240614151524.2718287-7-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:45:28 +02:00
Martin Jocic
cebfebefaa can: kvaser_pciefd: Add unlikely
Use unlikely for some unexpected errors.

Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240614151524.2718287-6-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:45:28 +02:00
Martin Jocic
0132a05df1 can: kvaser_pciefd: Add inline
Make the short function kvaser_pciefd_set_tx_irq inline. This function
is effectively three lines long and therefore inlining it should be
OK according to rule #15 of the Linux kernel coding style.

Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240614151524.2718287-5-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:45:27 +02:00
Martin Jocic
11d186697c can: kvaser_pciefd: Remove unnecessary comment
The code speaks for itself.

Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240614151524.2718287-4-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:45:27 +02:00
Martin Jocic
ac765219c2 can: kvaser_pciefd: Skip redundant NULL pointer check in ISR
This check is already done at the creation of the net devices in
kvaser_pciefd_setup_can_ctrls called from kvaser_pciefd_probe.

If it fails, the driver won't load, so there should be no need to
repeat the check inside the ISR. The number of channels is read
from the FPGA and should be trusted.

Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240614151524.2718287-3-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:45:27 +02:00
Martin Jocic
cdbc9d055f can: kvaser_pciefd: Group #defines together
Increases readability

Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240614151524.2718287-2-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:45:27 +02:00
Marc Kleine-Budde
cea846cc8f Merge patch series "can: kvaser_usb: Add support for three new devices"
Martin Jocic <martin.jocic@kvaser.com> says:

This patch series adds support for the following devices:
* Vining 800
* Kvaser USBcan Pro 5xCAN
* Kvaser Mini PCIe 1xCAN

Link: https://lore.kernel.org/all/20240612141946.3352364-1-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:44:55 +02:00
Martin Jocic
0135c4c6b8 can: kvaser_usb: Add support for Kvaser Mini PCIe 1xCAN
Add support for Kvaser Mini PCIe 1xCAN, based on the hydra platform.

Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240612141946.3352364-4-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:44:54 +02:00
Martin Jocic
96a669a195 can: kvaser_usb: Add support for Kvaser USBcan Pro 5xCAN
Add support for Kvaser USBcan Pro 5xCAN, based on the hydra platform.

Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240612141946.3352364-3-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:44:54 +02:00
Martin Jocic
2851d357a4 can: kvaser_usb: Add support for Vining 800
Add support for Vining 800, a branded device based on the hydra
platform.

Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240612141946.3352364-2-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21 09:44:53 +02:00
Pablo Caño
ad22051afd ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14AHP9
Lenovo Yoga Pro 7 14AHP9 (PCI SSID 17aa:3891) seems requiring a similar workaround like Yoga 9 model and Yoga 7 Pro 14APH8 for the bass speaker.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20231207182035.30248-1-tiwai@suse.de/
Signed-off-by: Pablo Caño <pablocpascual@gmail.com>
Link: https://patch.msgid.link/20240620152533.76712-1-pablocpascual@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-06-21 09:40:05 +02:00
Ming Qian
a8fb5fce7a media: imx-jpeg: Drop initial source change event if capture has been setup
In section 4.5.1.5. Initialization, the step 4 may be skipped and
continue with the Capture Setup sequence, so if the capture has been
setup, there is no need to trigger the initial source change event, just
start decoding, and follow the dynamic resolution change flow if the
configured values do not match those parsed by the decoder.

And it won't fail the gstreamer pipeline.

Fixes: b833b17849 ("media: imx-jpeg: notify source chagne event when the first picture parsed")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-21 08:57:09 +02:00
Ming Qian
f10edd839e media: imx-jpeg: Remove some redundant error logs
If the picture size parsed by decoder is different from those previously
established, it's a normal flow of dynamic resolution change, not an
error case, the log may mislead that some error occurs in decoding, so
remove the error log in this case.

Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-21 08:57:09 +02:00