Commit graph

1,323,830 commits

Author SHA1 Message Date
Bart Van Assche
a1babdb5b6 RDMA/iwcm: Simplify cm_work_handler()
Instead of complicating the code to avoid a spin_lock_irqsave() /
spin_lock_irqrestore() pair before returning, simplify the code by removing
the local variable 'empty'.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240605145117.397751-5-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-06-09 11:15:27 +03:00
Bart Van Assche
e1168f09b3 RDMA/iwcm: Simplify cm_event_handler()
queue_work() can test efficiently whether or not work is pending. Hence,
simplify cm_event_handler() by always calling queue_work() instead of only
if the list with pending work is empty.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240605145117.397751-4-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-06-09 11:15:27 +03:00
Bart Van Assche
fc772e38bc RDMA/iwcm: Change the return type of iwcm_deref_id()
Since iwcm_deref_id() returns either 0 or 1, change its return type from
'int' into 'bool'.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240605145117.397751-3-bvanassche@acm.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-06-09 11:15:27 +03:00
Bart Van Assche
b1bc15f8fb RDMA/iwcm: Use list_first_entry() where appropriate
Improve source code readability by using list_first_entry() where appropriate.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240605145117.397751-2-bvanassche@acm.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-06-09 11:15:27 +03:00
Linus Torvalds
771ed66105 One fix for the SiFive PRCI clocks so that the device boots again. This
driver was registering clkdev lookups that were always going to be
 useless. This wasn't a problem until clkdev started returning an error
 in these cases, causing this driver to fail probe, and thus boot to fail
 because clks are essential for most drivers. The fix is simple, don't
 use clkdev because this is a DT based system where clkdev isn't used.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmZlBJoRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSWECBAAswaNxK8xcEC60H9reH6UxyMNRxlDA3cv
 NW2Jmv5+Q1uSyTlsEmq3IDzqbURdR+e8A+bh9ZcJzZiTZC30WMC+CNU9nWe67nA7
 0eLNcSlerOKa+I9wc8wq5xwE9fCADkPpjyWXccUkngRrhFxWcsJNZjnc6Ki+o1IO
 +Uk4YQWFn7IG1xKtdwLpkpjHSjpZGloPrJClWCOfu4334VX9vS7lKJK7bmkQYciU
 dwPgVfcbtwYT5LHP6urmOjcxWcxOM1TrxA0sCsb3vTh1kWBrIcsunR0msATrWEgK
 sKQhEgwOFb5qrtabJaxoCrR3yB3VTfyecZYeuiVq+gnnWEPlHuzBpuC5DDdiy39q
 Va+sgC5Qi9+85BWwk/dXcjOYH/A/5aJZFtUI6MDwAPbNzyfiCwgc8aUiMIQ0EDtU
 yyviKIzWKBHq2OSoYAifd8UiO4ayy4DsB/azDSzHNJWQn1CrisH/Atu7kO/K7V+H
 KCH51ASfk/H60EJkfUJB8o/YvxdgaVRvK05912N0JlJqZesUc56KLIQer8vuItlz
 T7gDd1v+Z+lmCf+8U64YLXo6/RbVor6rVVWWHo7gnPl1dv4NS9hH4JMGYvI6LG2m
 yp7skURw8IQSoxMROmMDNU4GqalpvH/5Pyu4Lmrmg5SlA5NTX/YDHozL17ZgbzOZ
 u0vo/5IXWgU=
 =J4Wh
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fix from Stephen Boyd:
 "One fix for the SiFive PRCI clocks so that the device boots again.

  This driver was registering clkdev lookups that were always going to
  be useless. This wasn't a problem until clkdev started returning an
  error in these cases, causing this driver to fail probe, and thus boot
  to fail because clks are essential for most drivers. The fix is
  simple, don't use clkdev because this is a DT based system where
  clkdev isn't used"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sifive: Do not register clkdevs for PRCI clocks
2024-06-08 19:14:02 -07:00
Linus Torvalds
c5dbc2ed00 Two small smb3 client fixes
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmZk6z0ACgkQiiy9cAdy
 T1HtugwAn30am2MtXR51/20SEuJezAdVjuTFfQIAl0ChvtylMPjnu7cwyu+S5BJm
 lBHY76UoNP9E3l0TttRo1VGQ5zvbwCvUZgQgC+HNVmmndhjnEK3x34KqdDDx65qU
 42gj+q+2Wy/rRx1U1lttMLd5NhOYmIuKekPG8sFAc6AaMu+t0cfgC4dfiRcCZq5J
 R9N7C/7y53MbjW746P6pe1yF/TbKCw0wtWhEztXhOWDadRr6TBol4ahGiaC9xVOE
 7GijJIkKZXsYNYSxjUpU7cYcHK/DD6S7wE6wJV8/feViOCCQjt/OwXDxjndSt5GY
 faDzXD7/OdDXnZVeZ2dhj/9e3DwnLOfpI3k3s7onG3q9CS/e7ZbquTF76ZN2d2MZ
 UT+9+JVLAvG3xdEXshNb3wBuoz/NCx+xCamyzeRWd6FDQFb4zPLhAbDKXU4gO71v
 OmUTpX9n8H840JJURvQcr4qScPm/F4LlCTfH9fexenIJkFT+vnQFQp9oUqgAOX6T
 d7xb0Pho
 =MpUp
 -----END PGP SIGNATURE-----

Merge tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:
 "Two small smb3 client fixes:

   - fix deadlock in umount

   - minor cleanup due to netfs change"

* tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Don't advance the I/O iterator before terminating subrequest
  smb: client: fix deadlock in smb2_find_smb_tcon()
2024-06-08 19:07:18 -07:00
Jeff Johnson
fb7a4931ef hwmon: add missing MODULE_DESCRIPTION() macros
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/asus_atk0110.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/corsair-cpro.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/mr75203.o

Add all missing invocations of the MODULE_DESCRIPTION() macro.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240607-md-drivers-hwmon-v1-1-1ea6d6fe61e3@quicinc.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Javier Carrasco
1ee1237941 hwmon: (gsc-hwmon) use device_for_each_child_node_scoped()
Switch to the _scoped() version introduced in commit 365130fd47
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240404-hwmon_device_for_each_child_node_scoped-v1-2-53997abde43c@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Javier Carrasco
234c07400e hwmon: (ltc2991) use device_for_each_child_node_scoped()
Switch to the _scoped() version introduced in commit 365130fd47
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240404-hwmon_device_for_each_child_node_scoped-v1-1-53997abde43c@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
55076454de hwmon: (w83795): Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-32-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
00dcf379ff hwmon: (w83781d) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-31-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
38a085f9f4 hwmon: (tmp464) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-30-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
8b6e514c59 hwmon: (tmp421) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-29-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
516d5765a3 hwmon: (tmp401) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-28-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
50ba2d3d48 hwmon: (thmc50) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-27-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
64306a4719 hwmon: (shtc1) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-26-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
f147dbd7ea hwmon: (sht3x) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-25-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
77944b479d hwmon: (powr1220) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-24-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
f1230f756a hwmon: (mcp3021) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-23-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
de5fb06ca7 hwmon: (max6697) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-22-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
495e6a9cf5 hwmon: (max1668) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-21-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
5a71654b39 hwmon: (max16065) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-20-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
e2791bdfa6 hwmon: (lm95234) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-19-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
711e2e4f69 hwmon: (lm90) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-18-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
4cfd3ceeaa hwmon: (lm85) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-17-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
9339bed921 hwmon: (lm83) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-16-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
e49d1a1d33 hwmon: (lm78) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-15-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:33 -07:00
Andrew Davis
5178911d5c hwmon: (lm75) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-14-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:32 -07:00
Andrew Davis
cbc9b40818 hwmon: (lm63) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-13-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:32 -07:00
Andrew Davis
8b83969903 hwmon: (ina2xx) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-12-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:32 -07:00
Andrew Davis
945e71d5aa hwmon: (fschmd) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-11-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:32 -07:00
Andrew Davis
72fdab6b40 hwmon: (f75375s) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-10-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:32 -07:00
Andrew Davis
698d692cd8 hwmon: (ds1621) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-9-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:32 -07:00
Andrew Davis
9072777d93 hwmon: (dme1737) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-8-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:32 -07:00
Andrew Davis
941421c9ea hwmon: (aht10) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-7-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:32 -07:00
Andrew Davis
732d2624cf hwmon: (adt7475) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-6-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:32 -07:00
Andrew Davis
ec67556307 hwmon: (ads7828) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-5-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:32 -07:00
Andrew Davis
0f1874f847 hwmon: (adm1031) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-4-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:32 -07:00
Andrew Davis
884369b2c9 hwmon: (adm1021) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-3-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:32 -07:00
Andrew Davis
244f1664fe hwmon: (ad7418) Remove use of i2c_match_id()
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().

This helper has a couple other benefits:
 * It doesn't need the i2c_device_id passed in so we do not need
   to have that forward declared, allowing us to remove those or
   move the i2c_device_id table down to its more natural spot
   with the other module info.
 * It also checks for device match data, which allows for OF and
   ACPI based probing. That means we do not have to manually check
   those first and can remove those checks.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-2-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:32 -07:00
Krzysztof Kozlowski
b1ea8f7a30 hwmon: lm70: simplify with spi_get_device_match_data()
Use spi_get_device_match_data() helper to simplify a bit the driver.
Also kernel_ulong_t type is preferred for kernel code over uintptr_t
(needed for the cast).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240606142515.132504-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-06-08 16:07:32 -07:00
Alexander Sverdlin
a821d7111e iio: accel: fxls8962af: select IIO_BUFFER & IIO_KFIFO_BUF
Provide missing symbols to the module:
ERROR: modpost: iio_push_to_buffers [drivers/iio/accel/fxls8962af-core.ko] undefined!
ERROR: modpost: devm_iio_kfifo_buffer_setup_ext [drivers/iio/accel/fxls8962af-core.ko] undefined!

Cc: stable@vger.kernel.org
Fixes: 79e3a5bdd9 ("iio: accel: fxls8962af: add hw buffered sampling")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20240605203810.2908980-2-alexander.sverdlin@siemens.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-08 18:52:45 +01:00
Linus Torvalds
061d1af7b0 for-linus-2024060801
-----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEoEVH9lhNrxiMPSyI7MXwXhnZSjYFAmZklEoTHGJlbnRpc3NA
 a2VybmVsLm9yZwAKCRDsxfBeGdlKNq36D/sFCIZn48y+wh0lrkvrOkcchEuvluJ2
 oUoLY12WKli/03oKIcigMKXjieNmKPx4sfnJh1LLahBa2HDfN1D5lPULaFGc8PJY
 56VIDvnziqN13tFv3wIK05zSrgl9tWBe7HxCrh0SFWNq1BTe5jNzi/BVv00X1EAt
 AHha+V+EsV1B+v8wQ0lTkJRqSX4+LvIA/cNFgjKIuq18xTvZGJO82RY/uy8MrgPE
 c0WIO7SHvQ5kjRgyKihWQwuFPANmtJ7g5SWO3Z0LGAoZfRMsLMb3HO+Zd296LkBr
 k724wNuZ9RhAONk0XXiDpZ7VREAA003H2YLmozFAc6/c6D2We6jjGO2Irusjt8M6
 h9oow8TLz2KgW3jsbMt+sp8XMdDQFn1H3Cw8QRqYznV0Ji+wGGDhto39RAlzmeg/
 n5dUIUkBRHS/Zn22VCi/c+Uyp/tnT50aZ2BLlJ2g1oyLSQ8HcA8w47GpaaPHP1CI
 VMEKowaVqh8elVlrDQsHHsOMM9hQ6hQISg7TpRGAC9ard7hXNWeQ5mE8iP4N+g35
 y+pcZ9eRwNIJDHZtk4Hyg7zY5JngDSgO2rouzDV8EAmXk9jEy0zcKR8pFTWT4nhL
 yIQuQyC7rn6jJUo9PZtK0d52mnelCyC1fVuHdJeCwSP83k4YzcAsKL5/dZbWUGRD
 cBxNTv3U/pCp3g==
 =J35N
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID fixes from Benjamin Tissoires:

 - fix potential read out of bounds in hid-asus (Andrew Ballance)

 - fix endian-conversion on little endian systems in intel-ish-hid (Arnd
   Bergmann)

 - A couple of new input event codes (Aseda Aboagye)

 - errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
   (Christophe JAILLET), hid-logitech-dj (José Expósito)

 - current leakage fix while the device is in suspend on a i2c-hid
   laptop (Johan Hovold)

 - other assorted smaller fixes and device ID / quirk entry additions

* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Ignore battery for ELAN touchscreens 2F2C and 4116
  HID: i2c-hid: elan: fix reset suspend current leakage
  dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
  dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
  dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
  input: Add support for "Do Not Disturb"
  input: Add event code for accessibility key
  hid: asus: asus_report_fixup: fix potential read out of bounds
  HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
  HID: intel-ish-hid: fix endian-conversion
  HID: nintendo: Fix an error handling path in nintendo_hid_probe()
  HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
  HID: core: remove unnecessary WARN_ON() in implement()
  HID: nvidia-shield: Add missing check for input_ff_create_memless
  HID: intel-ish-hid: Fix build error for COMPILE_TEST
2024-06-08 10:48:11 -07:00
Fernando Yang
a2b8613295 iio: adc: ad7266: Fix variable checking bug
The ret variable was not checked after iio_device_release_direct_mode(),
which could possibly cause errors

Fixes: c70df20e31 ("iio: adc: ad7266: claim direct mode during sensor read")
Signed-off-by: Fernando Yang <hagisf@usp.br>
Link: https://lore.kernel.org/r/20240603180757.8560-1-hagisf@usp.br
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-08 18:26:57 +01:00
Sean Anderson
89b898c627 iio: xilinx-ams: Don't include ams_ctrl_channels in scan_mask
ams_enable_channel_sequence constructs a "scan_mask" for all the PS and
PL channels. This works out fine, since scan_index for these channels is
less than 64. However, it also includes the ams_ctrl_channels, where
scan_index is greater than 64, triggering undefined behavior. Since we
don't need these channels anyway, just exclude them.

Fixes: d5c70627a7 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://lore.kernel.org/r/20240311162800.11074-1-sean.anderson@linux.dev
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-08 18:26:57 +01:00
Linus Torvalds
329f70c5be Kbuild fixes for v6.10 (second)
- Fix the initial state of the save button in 'make gconfig'
 
  - Improve the Kconfig documentation
 
  - Fix a Kconfig bug regarding property visibility
 
  - Fix build breakage for systems where 'sed' is not installed in /bin
 
  - Fix a false warning about missing MODULE_DESCRIPTION()
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmZkjoAVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGEQgQAI6724AWOTd5pAkTxSGxNdzl12NB
 fzk3Sh/r1448QmzpXUbeGONHVXhwBRipl2oAZVwo/8YgwHOqUlAp/73GYD4ryz6P
 WCMHhVQ++yYSx9H1XvZ1hMM6RZI9hnBxk7KfSu+OYbg49shEq6MpToKBD8N/Fdlm
 HEmJWZXtGvANsxItRMpcZ1zHxYEDKcFmmyTc7vWEK929FLg0WAxj15C0vT+RAGs3
 byLsGsg84g/K3FNIjobXnBhKSV2qDbl0si+1T1DGmAHu2i/6i2bin6qqKt9P+CAa
 DY8GQfP07VdO/HPVUsCC2AxiNIsPycTPwF+1H0UGSNX8J3xguzdtwkNdn4dxenrn
 vV8JWyCyr2oMdhxlV9NmO5e7xWcg6c1gYJas8ilMmqCotV2NddY8EMLA3ta+/73n
 0Qvqiixy4J2K/8bNlHoDkn+Xnm82qcyU2w4qTB7+TUjYx/jsr+gnXYFqQBgjXQF8
 DGiyFhqGv5rd/dWoeKmSAhWjmOwOCXtx3T4s/PTpN+FIC+rMSX6l7lIrMBSiaTfM
 gLnytpUXdfSMUv071cqo/bizelLG44x8M8qv0+b/WaKO9U7YxwqxBMOyTzBwgnRB
 VGdEpROK/8FlKtRpk38AS884kn/1RStzjy868nvmmEZ582jO9FlqFMfK6sxD7uP1
 GOnXYcgDIKqmIROA
 =RzRM
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix the initial state of the save button in 'make gconfig'

 - Improve the Kconfig documentation

 - Fix a Kconfig bug regarding property visibility

 - Fix build breakage for systems where 'sed' is not installed in /bin

 - Fix a false warning about missing MODULE_DESCRIPTION()

* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
  kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
  kconfig: remove wrong expr_trans_bool()
  kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
  kconfig: doc: fix a typo in the note about 'imply'
  kconfig: gconf: give a proper initial state to the Save button
  kconfig: remove unneeded code for user-supplied values being out of range
2024-06-08 10:12:33 -07:00
Linus Torvalds
1e7ccdd325 media fixes for v6.10-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmZi4D8ACgkQCF8+vY7k
 4RXFYxAAnyyNn2GxGkc9tBbUMUC9O2GV8TYMDNcaUoD94dWQ4oMCH3ExdxjDAKEP
 +fR+ytKwbmb7/og0X5o0MTyJD4ttRkiAJwMNSoF+2Da8+KJhrHQOx9NL8Kpg3J/B
 ZsKtzEyVmxWx7+FwSA50hv1g0GdEtOS7F0fxgZYwt0tpZyYorW46DthqipA7N8Yl
 S50bV9rWy1n3Tt8XqVKqmZd0e77FpR8p6D899mLFxm3Q0NPkjtvmescamsmWpkzG
 r+KKeXqPOSCSPa/zRq+JMYXIeIXaK7akW9FQY+XWmP2nwWuwFb1EQXtlRVuatLK7
 P6PggXMzq1wP0+rGizooAFV79gaMb/HP00v9qGeaEdr3R502wLeRSbbQsnfL3ENe
 oaZ01ckms/dAYH8ph2trwS2ViUnfICiuV684VHVQJGZEsV74mVL5YyNmWftnRaJz
 xhtDptaTp0aICC36sqRg9CixU/ATPPuLoDpphgEQ/DAcEJphrSzXHZcZub1gAnMY
 RIECNp6YnLh7YwwRRaxgLE+n3xnppelyArKWbG498dOl/T5ccUvbKbfLWq9YDaPY
 JG3CZveYDr9FMCOQZuEROSMTFFpoyInBRUSUlROskRNp/+rPdkX3UrsQmvH+9+cb
 OspJZEkIPiFJZOfUP+PaUz24hpwSViABjeERHHVFmShZqXIG+zk=
 =4Zki
 -----END PGP SIGNATURE-----

Merge tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

 - fixes for the new ipu6 driver (and related fixes to mei csi driver)

 - fix a double debugfs remove logic at mgb4 driver

 - a documentation fix

* tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: intel/ipu6: add csi2 port sanity check in notifier bound
  media: intel/ipu6: update the maximum supported csi2 port number to 6
  media: mei: csi: Warn less verbosely of a missing device fwnode
  media: mei: csi: Put the IPU device reference
  media: intel/ipu6: fix the buffer flags caused by wrong parentheses
  media: intel/ipu6: Fix an error handling path in isys_probe()
  media: intel/ipu6: Move isys_remove() close to isys_probe()
  media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove()
  media: Documentation: v4l: Fix ACTIVE route flag
  media: mgb4: Fix double debugfs remove
2024-06-08 09:57:09 -07:00
Linus Torvalds
36714d69b1 Miscellaneous fixes:
- Fix possible memory leak the riscv-intc irqchip driver load failures
 
  - Fix boot crash in the sifive-plic irqchip driver caused by recently
    changed boot initialization order
 
  - Fix race condition in the gic-v3-its irqchip driver
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmZkDTMRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1hPsRAAoHgcHw9KGhI9+y7Xnnjt4W9Ud6S3W8cs
 AcmP9x83+iilnPQrrWlB/v5p02qBPPdpqnDvOnB/7bITxJGxnSBXj1awUuV45qX2
 QRS4sIDq6zkDH6pX0diiwqLbfWZwpcbvtnR3nXSGImOK0jI3yQiSLEc8vswt88Jr
 HnYg9UdvKCt7j+jbqf9PzPHJP8z/U+Kx6eMPF4H/6R+nccedtQ0D2BdR5RSKFVZM
 aQwpZp6LTTapp3B1lXOx6IJaVTkRMeEm9J2Zc4R/pD3dvKof0xpEwJ+dqBrPAjb0
 +ospUJcPz4Sw9XhBIrqq4A+LUewiVa9grI3t1qit+VtbXkVHfLK9mUlyXfQzgMFz
 JTlUgt3V4vpbceUbFZsefXeB2TDGAPpFQvwgNozvEx+IgEZjryrSa2SgAuhl4Y6b
 nIxwBYFMlG6GI8CIDVGyl3XK/DcKUXM1XloJwTRDWjN/cZloxaZjRIpIiACr+SYW
 S1axryYDqDG4VU3vfTEqb75VGm4rPtHLXqRDmu/ZL8/BIQ7CQqnD0eMGIQ79aEXj
 Ia5CccTWqu0dufA5rxl47lcacPEKYlVFTkTul1ujzM2ymllmwjTpPKvSEhcwUC6J
 XRR7iv372AUo1xnk1G34Wl6Mp9nbxW2DXNinX/eDuV0AqV/1EKxs6vqgddGKhOuX
 K+ER8F+is64=
 =98O/
 -----END PGP SIGNATURE-----

Merge tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq fixes from Ingo Molnar:

 - Fix possible memory leak the riscv-intc irqchip driver load failures

 - Fix boot crash in the sifive-plic irqchip driver caused by recently
   changed boot initialization order

 - Fix race condition in the gic-v3-its irqchip driver

* tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()
  irqchip/sifive-plic: Chain to parent IRQ after handlers are ready
  irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails
2024-06-08 09:44:50 -07:00
Linus Torvalds
7cedb020d5 Miscellaneous fixes:
- Fix kexec() crash if call depth tracking is enabled
 
  - Fix SMN reads on inaccessible registers on certain AMD systems
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmZkC+0RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1iPHA/+P+lT60i13QPX9HICpAKLC0ZPpBj+OXco
 jo/2MJddO04EVvYkojjzvvKVHEz4Q8O15IUprqeXbhp49xSdhX5Yn8o46xPrXoYz
 WkHphX6qiMKBeNE+i6hYzUKl+vfpyVQwUazUlfS/xk7H5CaolHdhOd5riIx6D9M1
 XYx9CT+8bWLppxL5LGTS1G1g03S+WnWDK0yr7FIY7i1SCzPqu0v2IUGFrvNhTrhu
 Ejj3YyVHDwBokkhDbzdV2rAUHzC7JkufipOM6I7TgFVRO783wP/o23b8syc+OtQD
 aNZUAyH7pNWiPUlUz4r3FjRUzqGIcQTKNZdHqGTDaHqH7dT/e09CYJ9LTiUEL0z4
 mx68gHemn8NKG+QuOixd78HiPTV27qhdivpwgVzFZyXZYILI38UTqqK55eKdsgba
 c0jtID74FGWTNpR06Ahs6G3uldQEqkZ5po08S7YTstw75vTb+c5iQznJffVwDKnb
 +fpBVfJBYIoVMZ7oWonEV3zPa3fMCkfnAByTcKqBNnAIkr7xgAuQuCOqgv+4b/7Y
 yDXbGlrdLCjoOdDVXVrpVPNXONd93M2wR8dXBeNJ+lp05ElfzNRyWriFBGA3kSOb
 H3T8XVN3O4nHWHNQfSwSrAqmChpV+W3TuBUjKtEHVAeQ3Ub31ja2us+RpbhQc1Jm
 iXMw3zNITeQ=
 =Gvh6
 -----END PGP SIGNATURE-----

Merge tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "Miscellaneous fixes:

   - Fix kexec() crash if call depth tracking is enabled

   - Fix SMN reads on inaccessible registers on certain AMD systems"

* tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/amd_nb: Check for invalid SMN reads
  x86/kexec: Fix bug with call depth tracking
2024-06-08 09:36:08 -07:00
Linus Torvalds
7cec2e16cb Fix race between perf_event_free_task() and perf_event_release_kernel()
that can result in missed wakeups and hung tasks.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmZkCmARHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1hrsBAAsOlZWV+VN0l6TGUqqVZZuuZO03Nk3TX3
 kk4iq/xj9pRNmq1bizfsyCFEH3lK7fSYK2I0/iK145vHASzqyeXT1EbtGv61g7EJ
 Z42oYdmAxhXcBOZRffZYI2t8zOcVBUV5s/aDmim11fftYdXkaX73pAHVJdhg/e0v
 tfgFeJwihG4ynCPa8HrRzBUEXwtKngB8II8mmHyL7E5SsoRsO0ubZBU2MW6P5NA9
 9f27ab9Uxj8YWAKa/1Yn6VKgAird8ao+kUu7hYDjZyZTEOvrXU3HrM+VXptnn1S8
 2UPSRPNlV2MGDn7Uo3AskIFkF4QlZ3DZFGKCn2n/1Qf/OqeD3d39DoCKzg7lTx+9
 gSd7cAtKkrsA1bwfz6uZVPEY9M4eVNqZ5aIo7K28q6zSvSFYy2LI0LCzFVwRgAyK
 q8+XyR0aH9R9BYT1Tj0i6z9uZY/h8KROO/M/bU0egG/JRe4WX7X7mjVEQAapHi5F
 xLvPH0I9wo3jDVuxr7hPaT30Xv67F8V9WSKQ6HlMDN/etXNNLysCyOxDmXSXJ6Z7
 9IWaLrHKJG36vj+rKOpPn6Tm+fGAxlm2lDfXExZkYnyzAI59mmf6XEHQBdPly/Q6
 mXZVi3APTOn0REUo3tqi6UiaLL56HD0yvzwSmqSAFke3Nv+za+SeerwgjS2JoYWr
 hJPmkc9fLBY=
 =uVD+
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf event fix from Ingo Molnar:
 "Fix race between perf_event_free_task() and perf_event_release_kernel()
  that can result in missed wakeups and hung tasks"

* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix missing wakeup when waiting for context reference
2024-06-08 09:26:59 -07:00