This limit became a hard cap starting with the change referenced below.
Surface creation on the device will fail if the requested size is larger
than this limit so altering the value arbitrarily will expose modes that
are too large for the device's hard limits.
Fixes: 7ebb47c9f9 ("drm/vmwgfx: Read new register for GB memory when available")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240521184720.767-3-ian.forbes@broadcom.com
SVGA requires individual surfaces to fit within graphics memory
(max_mob_pages) which means that modes with a final buffer size that would
exceed graphics memory must be pruned otherwise creation will fail.
Additionally llvmpipe requires its buffer height and width to be a multiple
of its tile size which is 64. As a result we have to anticipate that
llvmpipe will round up the mode size passed to it by the compositor when
it creates buffers and filter modes where this rounding exceeds graphics
memory.
This fixes an issue where VMs with low graphics memory (< 64MiB) configured
with high resolution mode boot to a black screen because surface creation
fails.
Fixes: d947d1b71d ("drm/vmwgfx: Add and connect connector helper function")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240521184720.767-2-ian.forbes@broadcom.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZmAYPgAKCRDbK58LschI
g2XdAP9M8zYLRw4IG8DUFug7F+oqRPqgbs+Gvsf9YNl5/PSiTQEA6WKa/ObaG/W9
vre9VxhMWKgcMfzqZyztNHAiDm8R+QI=
=l7gV
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-05
We've added 8 non-merge commits during the last 6 day(s) which contain
a total of 9 files changed, 34 insertions(+), 35 deletions(-).
The main changes are:
1) Fix a potential use-after-free in bpf_link_free when the link uses
dealloc_deferred to free the link object but later still tests for
presence of link->ops->dealloc, from Cong Wang.
2) Fix BPF test infra to set the run context for rawtp test_run callback
where syzbot reported a crash, from Jiri Olsa.
3) Fix bpf_session_cookie BTF_ID in the special_kfunc_set list to exclude
it for the case of !CONFIG_FPROBE, also from Jiri Olsa.
4) Fix a Coverity static analysis report to not close() a link_fd of -1
in the multi-uprobe feature detector, from Andrii Nakryiko.
5) Revert support for redirect to any xsk socket bound to the same umem
as it can result in corrupted ring state which can lead to a crash when
flushing rings. A different approach will be pursued for bpf-next to
address it safely, from Magnus Karlsson.
6) Fix inet_csk_accept prototype in test_sk_storage_tracing.c which caused
BPF CI failure after the last tree fast forwarding, from Andrii Nakryiko.
7) Fix a coccicheck warning in BPF devmap that iterator variable cannot
be NULL, from Thorsten Blum.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
Revert "xsk: Document ability to redirect to any socket bound to the same umem"
Revert "xsk: Support redirect to any socket bound to the same umem"
bpf: Set run context for rawtp test_run callback
bpf: Fix a potential use-after-free in bpf_link_free()
bpf, devmap: Remove unnecessary if check in for loop
libbpf: don't close(-1) in multi-uprobe feature detector
bpf: Fix bpf_session_cookie BTF_ID in special_kfunc_set list
selftests/bpf: fix inet_csk_accept prototype in test_sk_storage_tracing.c
====================
Link: https://lore.kernel.org/r/20240605091525.22628-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pid filtering test will set the pid filters and make sure that both
function and function_graph tracing honors the filters. But the
function_graph tracer test was failing because the PID was not being
filtered properly. That's because the funcgraph-proc option wasn't getting
set. Without that option the PID is not shown.
Instead we get:
+ cat trace
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
3) ! 143.685 us | kernel_clone();
3) ! 127.055 us | kernel_clone();
1) ! 127.170 us | kernel_clone();
3) ! 126.840 us | kernel_clone();
When we should be getting:
+ cat trace
# tracer: function_graph
#
# CPU TASK/PID DURATION FUNCTION CALLS
# | | | | | | | | |
4) bash-939 | # 1070.009 us | kernel_clone();
4) bash-939 | # 1116.903 us | kernel_clone();
5) bash-939 | ! 976.133 us | kernel_clone();
5) bash-939 | ! 954.012 us | kernel_clone();
The test looks for the pids it is filtering and will fail if it can not
find them. Without fungraph-proc option set, it will not be displayed and
the test will fail.
Link: https://lore.kernel.org/all/Zl9JFnzKGuUM10X2@J2N7QTR9R3/
Link: https://lore.kernel.org/linux-trace-kernel/20240604152550.0c01d7cd@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 35b944a997 ("selftests/ftrace: Add function_graph tracer to func-filter-pid test")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
The test is trying to push the heartbeat frequency to the limit, which
might sometimes fail. Such a failure does not provide valuable
information, because it does not indicate that there is something
necessarily wrong with either the driver or the hardware.
Remove the test to prevent random, unnecessary failures from appearing
in CI.
Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Niemiec, Krzysztof <krzysztof.niemiec@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fe2vu5h7v7ooxbhwpbfsypxg5mjrnt56gc3cgrqpnhgrgce334@qfrv2skxrp47
The update to the ops trampoline done by the function
ftrace_update_trampoline() was accidentally removed from
ftrace_update_pid_func(). Add it back.
Link: https://lore.kernel.org/linux-trace-kernel/20240605205337.6115e9a5@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: df3ec5da6a ("function_graph: Add pid tracing back to function graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Following the guidelines it takes 3 seconds to perform an FLR
reset. Let's give it a bit more slack because this time can
change depending on the platform and on the firmware
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240523235853.171796-1-andi.shyti@linux.intel.com
There is a potential out-of-bounds access when using test_bit() on a single
word. The test_bit() and set_bit() functions operate on long values, and
when testing or setting a single word, they can exceed the word
boundary. KASAN detects this issue and produces a dump:
BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas
Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965
For full log, please look at [1].
Make the allocation at least the size of sizeof(unsigned long) so that
set_bit() and test_bit() have sufficient room for read/write operations
without overwriting unallocated memory.
[1] Link: https://lore.kernel.org/all/ZkNcALr3W3KGYYJG@gmail.com/
Fixes: c696f7b83e ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path")
Cc: stable@vger.kernel.org
Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240605085530.499432-1-leitao@debian.org
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 321da3dc1f ("scsi: sd: usb_storage: uas: Access media prior
to querying device properties") triggered a read to LBA 0 before
attempting to inquire about device characteristics. This was done
because some protocol bridge devices will return generic values until
an attached storage device's media has been accessed.
Pierre Tomon reported that this change caused problems on a large
capacity external drive connected via a bridge device. The bridge in
question does not appear to implement the READ(10) command.
Issue a READ(16) instead of READ(10) when a device has been identified
as preferring 16-byte commands (use_16_for_rw heuristic).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218890
Link: https://lore.kernel.org/r/70dd7ae0-b6b1-48e1-bb59-53b7c7f18274@rowland.harvard.edu
Link: https://lore.kernel.org/r/20240605022521.3960956-1-martin.petersen@oracle.com
Fixes: 321da3dc1f ("scsi: sd: usb_storage: uas: Access media prior to querying device properties")
Cc: stable@vger.kernel.org
Reported-by: Pierre Tomon <pierretom+12@ik.me>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Pierre Tomon <pierretom+12@ik.me>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On failed verification of PTP clock pin, error message prints channel
number instead of pin index after "pin", which is incorrect.
Fix error message by adding channel number to the message and printing
pin number instead of channel number.
Fixes: 6092315dfd ("ptp: introduce programmable pins.")
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20240604120555.16643-1-karol.kolacinski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ronak Doshi says:
====================
vmxnet3: upgrade to version 9
vmxnet3 emulation has recently added timestamping feature which allows the
hypervisor (ESXi) to calculate latency from guest virtual NIC driver to all
the way up to the physical NIC. This patch series extends vmxnet3 driver
to leverage these new feature.
Compatibility is maintained using existing vmxnet3 versioning mechanism as
follows:
- new features added to vmxnet3 emulation are associated with new vmxnet3
version viz. vmxnet3 version 9.
- emulation advertises all the versions it supports to the driver.
- during initialization, vmxnet3 driver picks the highest version number
supported by both the emulation and the driver and configures emulation
to run at that version.
In particular, following changes are introduced:
Patch 1:
This patch introduces utility macros for vmxnet3 version 9 comparison
and updates Copyright information.
Patch 2:
This patch adds support to timestamp the packets so as to allow latency
measurement in the ESXi.
Patch 3:
This patch adds support to disable certain offloads on the device based
on the request specified by the user in the VM configuration.
Patch 4:
With all vmxnet3 version 9 changes incorporated in the vmxnet3 driver,
with this patch, the driver can configure emulation to run at vmxnet3
version 9.
====================
Link: https://lore.kernel.org/r/20240531193050.4132-1-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With all vmxnet3 version 9 changes incorporated in the vmxnet3 driver,
the driver can configure emulation to run at vmxnet3 version 9, provided
the emulation advertises support for version 9.
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240531193050.4132-5-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new command to disable certain offloads. This
allows user to specify, using VM configuration, if certain offloads
need to be disabled.
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240531193050.4132-4-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch enhances vmxnet3 to support latency measurement.
This support will help to track the latency in packet processing
between guest virtual nic driver and host. For this purpose, we
introduce a new timestamp ring in vmxnet3 which will be per Tx/Rx
queue. This ring will be used to carry timestamp of the packets
which will be used to calculate the latency.
User can enable latency measurement using realtime knob in vnic
setting in VCenter.
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240531193050.4132-3-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vmxnet3 is currently at version 7 and this patch initiates the
preparation to accommodate changes for up to version 9. Introduced
utility macros for vmxnet3 version 9 comparison and update Copyright
information.
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240531193050.4132-2-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If one TCA_TAPRIO_ATTR_PRIOMAP attribute has been provided,
taprio_parse_mqprio_opt() must validate it, or userspace
can inject arbitrary data to the kernel, the second time
taprio_change() is called.
First call (with valid attributes) sets dev->num_tc
to a non zero value.
Second call (with arbitrary mqprio attributes)
returns early from taprio_parse_mqprio_opt()
and bad things can happen.
Fixes: a3d43c0d56 ("taprio: Add support adding an admin schedule")
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20240604181511.769870-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function dp_wait_hpd_asserted() uses pm_runtime_get_sync() and
doesn't care about the return value. Potentially this can lead to
unclocked access if for some reason resuming of the DP controller fails.
Change the function to use pm_runtime_resume_and_get() and return an
error if resume fails.
Fixes: e2969ee302 ("drm/msm/dp: move of_dp_aux_populate_bus() to eDP probe()")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/580137/
Link: https://lore.kernel.org/r/20240226223446.4194079-1-dmitry.baryshkov@linaro.org
[quic_abhinavk@quicinc.com: resolved trivial conflict while rebase]
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
There are duplicate items in wb2_formats_rgb and wb2_formats_rgb_yuv,
which cause weston assertions failed.
weston: libweston/drm-formats.c:131: weston_drm_format_array_add_format:
Assertion `!weston_drm_format_array_find_format(formats, format)' failed.
Signed-off-by: Junhao Xie <bigfoot@classfun.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes: 8c16b988ba ("drm/msm/dpu: introduce separate wb2_format arrays for rgb and yuv")
Fixes: 53324b99bd ("drm/msm/dpu: add writeback blocks to the sm8250 DPU catalog")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/596847/
Link: https://lore.kernel.org/r/20240524150128.1878297-2-bigfoot@classfun.cn
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
In the DPU driver blank IRQ handling is called from a vblank worker and
can happen outside of the irq_enable / irq_disable pair. Using the
worker makes that completely asynchronous with the rest of the code.
Revert commit d13f638c9b ("drm/msm/dpu: drop
dpu_encoder_phys_ops.atomic_mode_set") to fix vblank IRQ assignment for
CMD DSI panels.
Call trace:
dpu_encoder_phys_cmd_control_vblank_irq+0x218/0x294
dpu_encoder_toggle_vblank_for_crtc+0x160/0x194
dpu_crtc_vblank+0xbc/0x228
dpu_kms_enable_vblank+0x18/0x24
vblank_ctrl_worker+0x34/0x6c
process_one_work+0x218/0x620
worker_thread+0x1ac/0x37c
kthread+0x114/0x118
ret_from_fork+0x10/0x20
Fixes: d13f638c9b ("drm/msm/dpu: drop dpu_encoder_phys_ops.atomic_mode_set")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/595065/
Link: https://lore.kernel.org/r/20240522-dpu-revert-ams-v2-1-b37825d708e1@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The irq_idx is unsigned so it cannot be lower than zero, better
to change the condition to check if it is equal with zero.
It could not cause any issue because a valid irq index starts from one.
Fixes: 5a9d50150c ("drm/msm/dpu: shift IRQ indices by 1")
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/596853/
Link: https://lore.kernel.org/r/20240509-irq_wait-v2-1-b8b687b22cc4@gmail.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Current ionic devices only support 52 internal physical address
lines. This is sufficient for x86_64 systems which have similar
limitations but does not apply to all other architectures,
notably IBM POWER (ppc64). To ensure that MSI/MSI-X vectors are
not set outside the physical address limits of the NIC, set the
no_64bit_msi value of the pci_dev structure during device probe.
Signed-off-by: David Christensen <drc@linux.ibm.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240603212747.1079134-1-drc@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, Smack mirrors the label of incoming tcp/ipv4 connections:
when a label 'foo' connects to a label 'bar' with tcp/ipv4,
'foo' always gets 'foo' in returned ipv4 packets. So,
1) returned packets are incorrectly labeled ('foo' instead of 'bar')
2) 'bar' can write to 'foo' without being authorized to write.
Here is a scenario how to see this:
* Take two machines, let's call them C and S,
with active Smack in the default state
(no settings, no rules, no labeled hosts, only builtin labels)
* At S, add Smack rule 'foo bar w'
(labels 'foo' and 'bar' are instantiated at S at this moment)
* At S, at label 'bar', launch a program
that listens for incoming tcp/ipv4 connections
* From C, at label 'foo', connect to the listener at S.
(label 'foo' is instantiated at C at this moment)
Connection succeedes and works.
* Send some data in both directions.
* Collect network traffic of this connection.
All packets in both directions are labeled with the CIPSO
of the label 'foo'. Hence, label 'bar' writes to 'foo' without
being authorized, and even without ever being known at C.
If anybody cares: exactly the same happens with DCCP.
This behavior 1st manifested in release 2.6.29.4 (see Fixes below)
and it looks unintentional. At least, no explanation was provided.
I changed returned packes label into the 'bar',
to bring it into line with the Smack documentation claims.
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Fix issues related to the handling of invalid trip points in the thermal
core and in the thermal debug code that have been overlooked by some
recent thermal control core changes.
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmZgpJcSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxn2EP/0YxHS9yw7XC50hwDQBmIQjFsAPIaz29
uLGokZkn4LU7aTvza3Vo7HDd7TVTDucVxtRD1R0+YPVFW/zzuj/BqiHntdPfBd/y
krOQIHREY6vF/9wJPXlwHgGrai8PSAar90gZ13YuCruI6VtKmQ3dLuVDRFbnccqX
GazHnQG3YL2mwjKVS9mnYwYlNjtctPbOjjTQ1+Zbr4/rnpJYYfJDwZ/AudcH1gSr
28LkOh3PvXxb126j4slBjJwlwPgpQKQW3ozEbvH+RgJQiYA5pVOpaM+o+9R2zd8J
AcmPvuP6Qtgyzs+Su7N+0NpQJ/vw0OCMEJ6BRUhw/NoeYOdKRvQZYrXeBjbiw+Yt
b+7l1sHhtoIUnZJK8JpDo6+4nLzF9sV3aPousMEEzc+NsPwFJdCClU/6HN4Gr1bN
H4GahJ0NWf/JzYrTQsoIte2JfdueXanhZ/oxoKHXBamo3t5eIKp3v1l05H+Upe4y
rtB5DrG/fLJXlO4H2orc4vuLcurxGOpMXhEC4dAIu1y6dndxPJC+fGhSNp6+4eTv
R46iJBKNyZ1YILVH3iNW7k+dQZKCxKgN/MKQFPBGh28KsZ+9zpjFn7XX3OTzFYHR
gKyvhYOWr2kcKlSLh1LPKg0zv6cu2b62qttrKHPAcPVZvOW9nNhbCZGrC4Wnh3xM
PIOXPftKHelM
=uz/z
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix issues related to the handling of invalid trip points in the
thermal core and in the thermal debug code that have been overlooked
by some recent thermal control core changes"
* tag 'thermal-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: trip: Trigger trip down notifications when trips involved in mitigation become invalid
thermal: core: Introduce thermal_trip_crossed()
thermal/debugfs: Allow tze_seq_show() to print statistics for invalid trips
thermal/debugfs: Print initial trip temperature and hysteresis in tze_seq_show()
- Fix error handling during EC operation region accesses in the ACPI EC
driver (Armin Wolf).
- Fix a memory leak in the APEI error injection driver introduced
during its converion to a platform driver (Dan Williams).
- Fix build failures related to the dev_is_pnp() macro by redefining it
as a proper function and exporting it to modules as appropriate and
unexport pnp_bus_type which need not be exported any more (Andy
Shevchenko).
- Update the ACPI AC driver to use power_supply_changed() to let the
power supply core handle configuration changes properly (Thomas
Weißschuh).
-----BEGIN PGP SIGNATURE-----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=j7lP
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix the ACPI EC and AC drivers, the ACPI APEI error injection
driver and build issues related to the dev_is_pnp() macro referring to
pnp_bus_type that is not exported to modules.
Specifics:
- Fix error handling during EC operation region accesses in the ACPI
EC driver (Armin Wolf)
- Fix a memory leak in the APEI error injection driver introduced
during its converion to a platform driver (Dan Williams)
- Fix build failures related to the dev_is_pnp() macro by redefining
it as a proper function and exporting it to modules as appropriate
and unexport pnp_bus_type which need not be exported any more (Andy
Shevchenko)
- Update the ACPI AC driver to use power_supply_changed() to let the
power supply core handle configuration changes properly (Thomas
Weißschuh)"
* tag 'acpi-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: AC: Properly notify powermanagement core about changes
PNP: Hide pnp_bus_type from the non-PNP code
PNP: Make dev_is_pnp() to be a function and export it for modules
ACPI: EC: Avoid returning AE_OK on errors in address space handler
ACPI: EC: Abort address space access upon error
ACPI: APEI: EINJ: Fix einj_dev release leak
- Fix a recently introduced unchecked HWP MSR access in the
intel_pstate driver (Srinivas Pandruvada).
- Add missing conversion from MHz to KHz to amd_pstate_set_boost()
to address sysfs inteface inconsistency and fix P-state frequency
reporting on AMD Family 1Ah CPUs in the cpupower utility (Dhananjay
Ugwekar).
- Get rid of an excess global header file used by the amd-pstate
cpufreq driver (Arnd Bergmann).
-----BEGIN PGP SIGNATURE-----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=lugn
-----END PGP SIGNATURE-----
Merge tag 'pm-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the intel_pstate and amd-pstate cpufreq drivers and the
cpupower utility.
Specifics:
- Fix a recently introduced unchecked HWP MSR access in the
intel_pstate driver (Srinivas Pandruvada)
- Add missing conversion from MHz to KHz to amd_pstate_set_boost() to
address sysfs inteface inconsistency and fix P-state frequency
reporting on AMD Family 1Ah CPUs in the cpupower utility (Dhananjay
Ugwekar)
- Get rid of an excess global header file used by the amd-pstate
cpufreq driver (Arnd Bergmann)"
* tag 'pm-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix unchecked HWP MSR access
cpufreq: amd-pstate: Fix the inconsistency in max frequency units
cpufreq: amd-pstate: remove global header file
tools/power/cpupower: Fix Pstate frequency reporting on AMD Family 1Ah CPUs
Commit 3a93da231c ("power: supply: rt5033: Use devm_power_supply_register() helper")
reworked the driver to use devm. While at it, the i2c_set_clientdata
was dropped along with the remove callback. Unfortunately other parts
of the driver also rely on i2c clientdata so this causes kernel oops.
Bring the call back to fix the driver.
Fixes: 3a93da231c ("power: supply: rt5033: Use devm_power_supply_register() helper")
Tested-by: Raymond Hackley <raymondhackley@protonmail.com>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240605-rt5033-null-clientdata-v1-1-558d710eeb4d@trvn.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If we ever meet a hardware that uses weird register bits and padding,
we may end up in off-by-one error since x/8 + y/8 might not be equal
to (x + y)/8 in some cases.
bits pad x/8+y/8 (x+y)/8
4..7 0..3 0 0 // x + y from 4 up to 7
4..7 4..7 0 1 // x + y from 8 up to 11
4..7 8..11 1 1 // x + y from 12 up to 15
8..15 0..7 1 1 // x + y from 8 up to 15
8..15 8..15 2 2 // x + y from 16 up to 23
Fix this by using (x+y)/8.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://msgid.link/r/20240605205315.19132-1-andy.shevchenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
atomic_dec_if_positive returns new value regardless if it is updated or
not. The commit in fixes changed the behavior of the condition to one
that differs from original code. Restore original condition to properly
maintain atomic counter.
Fixes: 165f87691a ("bnxt_en: add timestamping statistics support")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240604091939.785535-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of flow rule creation fail in mlx5_lag_create_port_sel_table(),
instead of previously created rules, the tainted pointer is deleted
deveral times.
Fix this bug by using correct flow rules pointers.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 352899f384 ("net/mlx5: Lag, use buckets in hash mode")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240604100552.25201-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AMD Zen-based systems use a System Management Network (SMN) that
provides access to implementation-specific registers.
SMN accesses are done indirectly through an index/data pair in PCI
config space. The PCI config access may fail and return an error code.
This would prevent the "read" value from being updated.
However, the PCI config access may succeed, but the return value may be
invalid. This is in similar fashion to PCI bad reads, i.e. return all
bits set.
Most systems will return 0 for SMN addresses that are not accessible.
This is in line with AMD convention that unavailable registers are
Read-as-Zero/Writes-Ignored.
However, some systems will return a "PCI Error Response" instead. This
value, along with an error code of 0 from the PCI config access, will
confuse callers of the amd_smn_read() function.
Check for this condition, clear the return value, and set a proper error
code.
Fixes: ddfe43cdc0 ("x86/amd_nb: Add SMN and Indirect Data Fabric access for AMD Fam17h")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230403164244.471141-1-yazen.ghannam@amd.com
Overmapping the identity VRAM mapping is triggering hardware bugs on
certain platforms. Use 2M pages for the last unaligned (to 1G) VRAM
chunk.
v2:
- Always use 2M pages for last chunk (Fei Yang)
- break loop when 2M pages are used
- Add assert for usable_size being 2M aligned
v3:
- Fix checkpatch
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Fei Yang <fei.yang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603181824.1927675-1-matthew.brost@intel.com
There's a bunch of structs created and freed every time the mailbox is
used. Move them to use the scope-based cleanup infrastructure to avoid
manually tearing them down. mpfs_auto_update_available() didn't free the
memory that it used (albeit it allocated exactly once during probe) so
that gets moved over too.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
This buffer is used exclusively by mpfs_auto_update_set_image_address(),
so move the management of it there, employing the recently added cleanup
infrastructure to avoid littering the function with gotos.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
-----BEGIN PGP SIGNATURE-----
iQFLBAABCgA1FiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmZgjPUXHHF1aWNfa3Zh
bG9AcXVpY2luYy5jb20ACgkQbhckVSbrbZuVggf/SUE9KjLAt4HBg3ag6Kj5E6U+
c9Z2oCaqCpSMP2K48PMekSJuemr92gVvs1g7I1ksOsgIpFVsNozgnb9SQVDJn9Py
kO53Vi0W7a3EoQ+zLv+YZGEguj5TUN5ijj4W6zG9AInNwDKbz4vcaART70WUbjtN
maxBnxMvSnCcHjfnam2GfDd5nK+Te/DrOZqIMxMWFlKOQLmNLfFWxdN6MHCNiBYf
1v3i4r6RkwFWLsafcMoDJJc5AbEK38Gp1h5/QeGZo3nCokknW8e7s7nDFifoOVSQ
k1AiWIIy8zj0HixAFfUwON+APdAWNENJiIoUMIt8j5dAcxoLa3fMFYM16qClew==
=8QAR
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20240605' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
ath.git patches for v6.11
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
Tests show that user fence signalling requires kind of write barrier,
otherwise not all writes performed by the workload will be available
to userspace. It is already done for render and compute, we need it
also for the rest: video, gsc, copy.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605-fix_user_fence_posted-v3-2-06e7932f784a@intel.com
This reverts commit 38007fa964.
Signaling user-fence after seqno write does not seem to be good solution.
Instead of changing order separate barrier should be put before user-fence,
this will be done in separate patch.
v2: added fixes tag in case reverted patch gets backported to stable
Fixes: 38007fa964 ("drm/xe: flush gtt before signalling user fence on all engines")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605-fix_user_fence_posted-v3-1-06e7932f784a@intel.com
-----BEGIN PGP SIGNATURE-----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=q3Ic
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A fix for fast fsync that needs to handle errors during writes after
some COW failure so it does not lead to an inconsistent state"
* tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ensure fast fsync waits for ordered extents after a write failure
Just a few small fixes.
-----BEGIN PGP SIGNATURE-----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=ODoL
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-06-05' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Just a few small fixes"
* tag 'bcachefs-2024-06-05' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix trans->locked assert
bcachefs: Rereplicate now moves data off of durability=0 devices
bcachefs: Fix GFP_KERNEL allocation in break_cycle()
Some fixes and refactors of rtlwifi, rtw88 and rtw89. Only one major change
listed below:
rtlwifi:
- add new chip support of RTL8192DU
-----BEGIN PGP SIGNATURE-----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=tWr4
-----END PGP SIGNATURE-----
Merge tag 'rtw-next-2024-06-04' of https://github.com/pkshih/rtw
rtw-next patches for v6.11
Some fixes and refactors of rtlwifi, rtw88 and rtw89. Only one major change
listed below:
rtlwifi:
- add new chip support of RTL8192DU
- Use reserved tags for special fabrics operations (Chunguang)
- Persistent Reservation status masking fix (Weiwen)
-----BEGIN PGP SIGNATURE-----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=YlZu
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.10-2024-06-05' of git://git.infradead.org/nvme into block-6.10
Pull NVMe fixes from Keith:
"nvme fixes Linux 6.10
- Use reserved tags for special fabrics operations (Chunguang)
- Persistent Reservation status masking fix (Weiwen)"
* tag 'nvme-6.10-2024-06-05' of git://git.infradead.org/nvme:
nvme: fix nvme_pr_* status code parsing
nvme-fabrics: use reserved tag for reg read/write command
Block size should be between 512 and PAGE_SIZE and be a power of 2. The current
check does not validate this, so update the check.
Without this patch, null_blk would Oops due to a null pointer deref when
loaded with bs=1536 [1].
Link: https://lore.kernel.org/all/87wmn8mocd.fsf@metaspace.dk/
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240603192645.977968-1-nmi@metaspace.dk
[axboe: remove unnecessary braces and != 0 check]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Flexible arrays used [1] instead of []. Replace the former with the latter
to resolve multiple UBSAN warnings observed on boot with a BONAIRE card.
In addition, use the __counted_by attribute where possible to hint the
length of the arrays to the compiler and any sanitizers.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit cd94d1b182 ("dm/amd/pm: Fix problems with reboot/shutdown for
some SMU 13.0.4/13.0.11 users") attempted to fix shutdown issues
that were reported since commit 31729e8c21 ("drm/amd/pm: fixes a
random hang in S4 for SMU v13.0.4/11") but caused issues for some
people.
Adjust the workaround flow to properly only apply in the S4 case:
-> For shutdown go through SMU_MSG_PrepareMp1ForUnload
-> For S4 go through SMU_MSG_GfxDeviceDriverReset and
SMU_MSG_PrepareMp1ForUnload
Reported-and-tested-by: lectrode <electrodexsnet@gmail.com>
Closes: https://github.com/void-linux/void-packages/issues/50417
Cc: stable@vger.kernel.org
Fixes: cd94d1b182 ("dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users")
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
one dependency in the drm subsystem fell through the cracks and was only
applied for rc2. Now, we can finally remove I2C_CLASS_SPD.
-----BEGIN PGP SIGNATURE-----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=yBu4
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"This should have been my second pull request during the merge window
but one dependency in the drm subsystem fell through the cracks and
was only applied for rc2.
Now we can finally remove I2C_CLASS_SPD"
* tag 'i2c-for-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: Remove I2C_CLASS_SPD
i2c: synquacer: Remove a clk reference from struct synquacer_i2c
The bug fix for tpm_tis_core_init() is not that critical but still makes
sense to get into release for the sake of better quality. I included the
Intel CPU model define change mainly to help Tony just a bit, as for this
subsystem it cannot realistically speaking cause any possible harm.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iJYEABYKAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCZl/I3iAcamFya2tvLnNh
a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0u0gAPoCkr/3zGmVd7pB
SabhfpG6jPWDaIH0UZiuwjMwBw1ddwD/TjeAD/zwfGhEXwaezCkyyv/lVBVVDNAA
9OsxqWYkIQE=
=Cryk
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"The bug fix for tpm_tis_core_init() is not that critical but still
makes sense to get into release for the sake of better quality.
I included the Intel CPU model define change mainly to help Tony just
a bit, as for this subsystem it cannot realistically speaking cause
any possible harm"
* tag 'tpmdd-next-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Switch to new Intel CPU model defines
tpm_tis: Do *not* flush uninitialized work