The core code now provides a mechanism to convert the ART base clock to the
corresponding TSC value without requiring an architecture specific
function.
Replace the direct conversion by filling in the required data.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240513103813.5666-6-lakshmi.sowjanya.d@intel.com
The core code now provides a mechanism to convert the ART base clock to the
corresponding TSC value without requiring an architecture specific
function.
Replace the direct conversion by filling in the required data.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240513103813.5666-5-lakshmi.sowjanya.d@intel.com
The core code now provides a mechanism to convert the ART base clock to the
corresponding TSC value without requiring an architecture specific
function.
Replace the direct conversion by filling in the required data.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240513103813.5666-4-lakshmi.sowjanya.d@intel.com
The core code provides a new mechanism to allow conversion between ART and
TSC. This allows to replace the x86 specific ART/TSC conversion functions.
Prepare for removal by filling in the base clock conversion information for
ART and associating the base clock to the TSC clocksource.
The existing conversion functions will be removed once the usage sites are
converted over to the new model.
[ tglx: Massaged change log ]
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240513103813.5666-3-lakshmi.sowjanya.d@intel.com
Hardware time stamps like provided by PTP clock implementations are based
on a clock which feeds both the PCIe device and the system clock. For
further processing the underlying hardwarre clock timestamp must be
converted to the system clock.
Right now this requires drivers to invoke an architecture specific
conversion function, e.g. to convert the ART (Always Running Timer)
timestamp to a TSC timestamp.
As the system clock is aware of the underlying base clock, this can be
moved to the core code by providing a base clock property for the system
clock which contains the conversion factors and assigning a clocksource ID
to the base clock.
Add the required data structures and the conversion infrastructure in the
core code to prepare for converting X86 and the related PTP drivers over.
[ tglx: Added a missing READ_ONCE(). Massaged change log ]
Co-developed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240513103813.5666-2-lakshmi.sowjanya.d@intel.com
Fix the make W=1 warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in kernel/time/clocksource-wdtest.o
WARNING: modpost: missing MODULE_DESCRIPTION() in kernel/time/test_udelay.o
WARNING: modpost: missing MODULE_DESCRIPTION() in kernel/time/time_test.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240510-time-md-v1-1-44a8a36ac4b0@quicinc.com
Use 2-argument strscpy(), which is not only shorter but also provides
an additional check that destination buffer is an array.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240602090244.1666360-8-andy.shevchenko@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The silead touchscreen driver now defaults to 10 fingers, so it is no
longer necessary to have a "silead,max-fingers=10" property for each
silead touchscreen model. Drop this property from all the configs.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240525193854.39130-3-hdegoede@redhat.com
When support for Silead touchscreens was orginal added some touchscreens
with older firmware versions only supported 5 fingers and this was made
the default requiring the setting of a "silead,max-fingers=10" uint32
device-property for all touchscreen models which do support 10 fingers.
There are very few models with the old 5 finger fw, so in practice the
setting of the "silead,max-fingers=10" is boilerplate which needs to
be copy and pasted to every touchscreen config.
Reporting that 10 fingers are supported on devices which only support
5 fingers doesn't cause any problems for userspace in practice, since
at max 4 finger gestures are supported anyways. Drop the max_fingers
configuration and simply always assume 10 fingers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240525193854.39130-2-hdegoede@redhat.com
The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display from an unknown
OEM used in a number of handheld gaming devices made by Anbernic.
Limited information is available online however the panel timing values
(below) have been obtained from the vendor BSP. The panel appears to
integrate a NV3052C LCD driver (or clone). Available devices address it
in SPI/RGB mode, with the timing signals generated from the device
SoC (Allwinner H700) and passed through.
Add a panel definition and display mode to the existing NV3502C driver.
It was assumed during bringup that the initialisation sequence was the
same as the existing Fascontek FS035VG158 panel, proved working during
experimentation, however subsequent dumping of the init sequence with a
logic analyser confirms one small change to VCOM_ADJ3 from 0x4a to 0x44,
therefore a separate set of registers is also added.
Timings:
| Active | FP | Sync | BP | Total
-----------|--------|------|------|------|-------
Horizontal | 640 | 64 | 20 | 46 | 770
Vertical | 480 | 21 | 4 | 15 | 520
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Co-developed-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Reviewed-by: John Watts <contact@jookia.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240530211415.44201-4-ryan@testtoast.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530211415.44201-4-ryan@testtoast.com
Squash warnings such as:
arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dtb: sgpio@1e780200: '#interrupt-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
Also, mark #interrupt-cells as required. The kernel devicetrees already
specified it where compatible nodes were defined, and u-boot pulls in
the kernel devicetrees, so this should have minimal practical impact.
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240530-dt-warnings-gpio-sgpio-interrupt-cells-v2-2-912cd16e641f@codeconstruct.com.au
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Some devicetrees specify gpio-line-names in the sgpio node despite it
not being defined by the binding. It's a reasonable thing to do, so
define the property to squash warnings such as:
arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dtb: sgpio@1e780200: 'gpio-line-names' does not match any of the regexes: 'pinctrl-[0-9]+'
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20240530-dt-warnings-gpio-sgpio-interrupt-cells-v2-1-912cd16e641f@codeconstruct.com.au
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert binding doc from txt to yaml.
Remove redundated "gpio1: gpio@2300000" example.
Add gpio-controller at example "gpio@1100".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240531164357.1419858-1-Frank.Li@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The TI TCA9535 variant has the same programming model as the NXP PCA9535.
Document the "ti,tca9535" compatible string.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240531121801.2161154-2-festevam@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add support for the TI TCA9535 variant.
The NXP PCA9535 is already supported by the driver.
TCA9535 supports lower voltage operation (down to 1.65V VCC)
compared to PCA (down to 2.3V VCC).
>From a software perspective, these models are equivalent as they
have the same register map.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240531121801.2161154-1-festevam@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We want to have sink Early Transport capability and usage in our psr
debugfs status interface.
v4: use su_region_et_enabled instead of psr2_su_region_et_valid
v3: remove extra space from "PSR mode: disabled"
v2: printout "Selective Update enabled (Early Transport)" instead of
"Selective Update Early Transport enabled"
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529093849.1016172-7-jouni.hogander@intel.com
Currently setting I915_PSR_DEBUG_SU_REGION_ET_DISABLE (0x20) via psr_debug
debugfs interface is not allowed. This patch allows it.
v3:
- ensure psr is disabled/enabled if enable_psr2_su_region_et changes
- remove extra space
v2: ensure that fastset is performed when the bit changes
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529093849.1016172-6-jouni.hogander@intel.com
The GPIO_BRCMSTB hardware IP is also included in the bcm2712
SoC so enable the driver to also be built for ARCH_BCM2835.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240530181737.1261450-1-pbrobinson@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Currently we are purely relying on psr2_su_region_et_valid. Add new boolean
value into intel_psr struct indicating whether Early Transport is enabled
or not and use it instead of psr2_su_region_et_valid for getting Early
Transport status information.
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529093849.1016172-2-jouni.hogander@intel.com
The internal handling of VLAN IDs in batman-adv is only specified for
following encodings:
* VLAN is used
- bit 15 is 1
- bit 11 - bit 0 is the VLAN ID (0-4095)
- remaining bits are 0
* No VLAN is used
- bit 15 is 0
- remaining bits are 0
batman-adv was only preparing new translation table entries (based on its
soft interface information) using this encoding format. But the receive
path was never checking if entries in the roam or TT TVLVs were also
following this encoding.
It was therefore possible to create more than the expected maximum of 4096
+ 1 entries in the originator VLAN list. Simply by setting the "remaining
bits" to "random" values in corresponding TVLV.
Cc: stable@vger.kernel.org
Fixes: 7ea7b4a142 ("batman-adv: make the TT CRC logic VLAN specific")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Use 'renesas,rzg2l-sdhi' as a fallback string for SDHI nodes, where
hs400_disabled and fixed_addr_mode quirks are applied.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240422213006.505576-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use 'renesas,rzg2l-sdhi' as a fallback string for SDHI nodes, where
hs400_disabled and fixed_addr_mode quirks are applied.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240422213006.505576-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use 'renesas,rzg2l-sdhi' as a fallback string for SDHI nodes, where
hs400_disabled and fixed_addr_mode quirks are applied.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240422213006.505576-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the CSI40 and CSI41 module clocks, which are used by the CSI-2
interfaces on the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240527131541.1676525-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the ISPCS0 and ISPCS1 module clocks, which are used by the ISPCS
modules on the Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240527131541.1676525-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The GMAC of Loongson chips cannot insert the correct 1.5-2ns delay. So
we need the PHY to insert internal delays for both transmit and receive
data lines from/to the PHY device. Fix this by changing the "phy-mode"
from "rgmii" to "rgmii-id" in dts.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In JUMP_VIRT_ADDR we are performing an or calculation on address value
directly from pcaddi.
This will only work if we are currently running from direct 1:1 mapping
addresses or firmware's DMW is configured exactly same as kernel. Still,
we should not rely on such assumption.
Fix by overriding higher bits in address comes from pcaddi, so we can
get rid of or operator.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Currently kernel entry in head.S is in DMW address range, firmware is
instructed to jump to this address after loading the kernel image.
However kernel should not make any assumption on firmware's DMW
setting, thus the entry point should be a physical address falls into
direct translation region.
Fix by converting entry address to physical and amend entry calculation
logic in libstub accordingly.
BTW, use ABSOLUTE() to calculate variables to make Clang/LLVM happy.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
NUMA enabled kernel on FDT based machine fails to boot because CPUs
are all in NUMA_NO_NODE and mm subsystem won't accept that.
Fix by adding them to default NUMA node at FDT parsing phase and move
numa_add_cpu(0) to a later point.
Cc: stable@vger.kernel.org
Fixes: 88d4d957ed ("LoongArch: Add FDT booting support from efi system table")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
fdt_check_header(__dtb_start) will always success because kernel
provides a dummy dtb, and by coincidence __dtb_start clashed with
entry of this dummy dtb. The consequence is fdt passed from firmware
will never be taken.
Fix by trying to utilise __dtb_start only when CONFIG_BUILTIN_DTB is
enabled.
Cc: stable@vger.kernel.org
Fixes: 7b937cc243 ("of: Create of_root if no dtb provided by firmware")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Both acpi_table_upgrade() and acpi_boot_table_init() are defined as
empty functions under !CONFIG_ACPI_TABLE_UPGRADE and !CONFIG_ACPI in
include/linux/acpi.h, there are no implicit declaration errors with
various configs.
#ifdef CONFIG_ACPI_TABLE_UPGRADE
void acpi_table_upgrade(void);
#else
static inline void acpi_table_upgrade(void) { }
#endif
#ifdef CONFIG_ACPI
...
void acpi_boot_table_init (void);
...
#else /* !CONFIG_ACPI */
...
static inline void acpi_boot_table_init(void)
{
}
...
#endif /* !CONFIG_ACPI */
As Huacai suggested, CONFIG_ACPI_TABLE_UPGRADE is ugly and not necessary
here, just remove it. At the same time, just keep CONFIG_ACPI to prevent
potential build errors in future, and give a signal to indicate the code
is ACPI-specific. For the same reason, we also put acpi_table_upgrade()
under CONFIG_ACPI.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Additionally, a cleanup in the Synquacer code removes the pclk
from the global structure, as it is used only in the probe.
Therefore, it is now declared locally.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZk8txxYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uRIgBAOpkv9LBc1NsjUXM2UNA0L3zEXvF
ZbCYV7cEIYMxt2AdAQD1Nsy1olg8Juq3H8A6buC3hYkJJA0IY3EKS6ttnNsQDw==
=S5ew
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-6.10-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
Removed the SPD class of i2c devices from the device core.
Additionally, a cleanup in the Synquacer code removes the pclk
from the global structure, as it is used only in the probe.
Therefore, it is now declared locally.
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531203706.233365-10-tony.luck@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531203706.233365-9-tony.luck@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531203706.233365-8-tony.luck@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531203706.233365-7-tony.luck@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531203706.233365-6-tony.luck@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531203706.233365-5-tony.luck@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20240531203706.233365-4-tony.luck@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531203706.233365-3-tony.luck@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531203706.233365-2-tony.luck@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/cpufreq/cpufreq-dt-platdev.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It is preferred to use sizeof(*pointer) instead of sizeof(type)
due to the type of the variable can change and one needs not
change the former (unlike the latter). This patch has no effect
on runtime behavior.
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Link: https://lore.kernel.org/r/AS8PR02MB7237B05083487507CFAF96B08BFE2@AS8PR02MB7237.eurprd02.prod.outlook.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>