Commit graph

1,323,830 commits

Author SHA1 Message Date
Linus Torvalds
7dc78c7b44 sound fixes for 6.9-rc7
As usual in a late stage, we received a fair amount of fixes for ASoC,
 and it became bigger than wished.  But all fixes are rather device-
 specific, and they look pretty safe to apply.
 
 A major par of changes are series of fixes for ASoC meson and SOF
 drivers as well as for Realtek and Cirrus codecs.  In addition,
 recent emu10k1 regression fixes and usual HD-audio quirks are
 included.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmY0n6wOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE8PqA/7BB6G1i3ARX7MusxZA/bqoEQ5nVhocs/WJGos
 WCUTc6GH9uWvpBE+dY3/9IQemnndb5LaKuIK8Bh1ooTdHiu431X4cXPqX5U2gvbW
 iHom2Mk7KFPVqQEzx0QV4i5gc68G3FMgwi2G6FMx4APaNn2XpyTweKoV9V8keBQq
 lpLQ5dxxeK4CJQFen5HOY0NqxtydSq4ee1wEK8UaxYWdI0U6EQ3aHqs+MvUytTvv
 zgfm0QUE1tWjpEg2NnVdsJsoJ7W8NQWJqhuELR+cZY2nE6c0yEZDSmVOcCe8SaDu
 GjsAQZ3RWIBtBnjeU9XYdtxOqviDAzxic0x0CQWS/WIk/AI4vLRBu8ke+0N92lrO
 XthqrbF+5Gf+SwGeh8UldInR/wFMnvatOhg91JGJfFFOq8lPSk6XG59CXc6o8Hqc
 G7fWxRkbPI93mSxmWdoOLfzoQLpCUw2hKt5CtKVpPs3Pw01lKUK5ypRMDxpr8yiv
 gJ8RpK9d1Rxvi6422B3f+/0uX/R2Lis1D28GzqJDAvR12GceJtX2Ngnto0xya3Hb
 n4nAUA2CP1OdaHX9652iC+7d7NI7RHFen1Pme/EvidH2aA93C5W6FzpcmI5J70AZ
 BCCaeHnAP4mLY2Xozi12RHb9+fBZ+OJ3nSg79EiTKyTzf11DqTZe1/QLg+gTl4Aa
 n4ZaTKY=
 =K8HF
 -----END PGP SIGNATURE-----

Merge tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "As usual in a late stage, we received a fair amount of fixes for ASoC,
  and it became bigger than wished. But all fixes are rather device-
  specific, and they look pretty safe to apply.

  A major par of changes are series of fixes for ASoC meson and SOF
  drivers as well as for Realtek and Cirrus codecs. In addition, recent
  emu10k1 regression fixes and usual HD-audio quirks are included"

* tag 'sound-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
  ALSA: hda/realtek: Fix build error without CONFIG_PM
  ALSA: hda/realtek: Fix conflicting PCI SSID 17aa:386f for Lenovo Legion models
  ALSA: hda/realtek - Set GPIO3 to default at S4 state for Thinkpad with ALC1318
  ALSA: hda: intel-sdw-acpi: fix usage of device_get_named_child_node()
  ALSA: hda: intel-dsp-config: harden I2C/I2S codec detection
  ASoC: cs35l56: fix usages of device_get_named_child_node()
  ASoC: da7219-aad: fix usage of device_get_named_child_node()
  ASoC: meson: cards: select SND_DYNAMIC_MINORS
  ASoC: meson: axg-tdm: add continuous clock support
  ASoC: meson: axg-tdm-interface: manage formatters in trigger
  ASoC: meson: axg-card: make links nonatomic
  ASoC: meson: axg-fifo: use threaded irq to check periods
  ALSA: hda/realtek: Fix mute led of HP Laptop 15-da3001TU
  ALSA: emu10k1: make E-MU FPGA writes potentially more reliable
  ALSA: emu10k1: fix E-MU dock initialization
  ALSA: emu10k1: use mutex for E-MU FPGA access locking
  ALSA: emu10k1: move the whole GPIO event handling to the workqueue
  ALSA: emu10k1: factor out snd_emu1010_load_dock_firmware()
  ALSA: emu10k1: fix E-MU card dock presence monitoring
  ASoC: rt715-sdca: volume step modification
  ...
2024-05-03 09:24:46 -07:00
Naresh Solanki
45bf8305fb hwmon: (max6639) Use regmap
Add regmap support & remove local caching.

Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20240503120020.3450972-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-05-03 09:20:04 -07:00
Linus Torvalds
b5a66609a6 drm fixes for 6.9-rc7
amdgpu:
 - Fix VRAM memory accounting
 - DCN 3.1 fixes
 - DCN 2.0 fix
 - DCN 3.1.5 fix
 - DCN 3.5 fix
 - DCN 3.2.1 fix
 - DP fixes
 - Seamless boot fix
 - Fix call order in amdgpu_ttm_move()
 - Fix doorbell regression
 - Disable panel replay temporarily
 
 amdkfd:
 - Flush wq before creating kfd process
 
 xe:
 - Fix UAF on rebind worker
 - Fix ADL-N display integration
 
 imagination:
 - fix page-count macro
 
 nouveau:
 - avoid page-table allocation failures
 - fix firmware memory allocation
 
 panel:
 - ili9341: avoid OF for device properties; respect deferred probe; fix
   usage of errno codes
 
 ttm:
 - fix status output
 
 vmwgfx:
 - fix legacy display unit
 - fix read length in fence signalling
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmY0XiIACgkQDHTzWXnE
 hr5d6w/9G8KU+0lrKnCmZtC/ViEwSz19SZwTkbajCtYsO+MaZA1caA7WNFa9aD+F
 sMGbNaeI+5nlc84bBEKCRtln2KK5U6oyY2oEmjb23T2W2qzrOHEBU0f98DOTaHeL
 HDSDYP50linfOVnASKoQ7jx0x8dnO7ITS62V5ooedK9JTG8V8hhheFT1xzKyuohE
 SNbaHlvKOCruJCvi5G/ygZmTI17pj72u5KEE0Vr8TmxGqloxMiYwdut+gluqPfMv
 E6D9D+zstnUi8vWtKYW94CeIinKvA8k3IQdP5T09uKwsrNL+uJZfexNMe5/swaSo
 9ugF/gpAAKxG2Hvm2u62DafCs8SP77lTg/Qy0fo2Ie5nkShOGecM0dp2GW4x7Jmn
 6T0Qa3XNOcRVKpIL8wda6FGr6l1UVQUNp8IrOUZiy1W7LQkBLW7QPwjfnh7Cn+Xg
 VpUOc+PAV666wPtG3fv0rCjBbslgvB8z1sLSnlUTxMaq0+VHsxczs9BAigkqMH+F
 Zi3wUgvFf23vjYefIEkNbQrUvcjFwzRVCM0EZeM/O2o8X0PYWIgS+0OIGXPbkAPu
 /RCWbEBHVQqgLME/vWbktfYVjm76vhizPvoHGi451zxMhAzaQo7bhqrEVp2+IRfk
 HiQljceUvU4eU1Ey8ApNC8SrVs8swjmKiJNess0ujebKiLco0Hw=
 =B5on
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2024-05-03' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
 "Weekly fixes, mostly made up from amdgpu and some panel changes.

  Otherwise xe, nouveau, vmwgfx and a couple of others, all seems pretty
  on track.

  amdgpu:
   - Fix VRAM memory accounting
   - DCN 3.1 fixes
   - DCN 2.0 fix
   - DCN 3.1.5 fix
   - DCN 3.5 fix
   - DCN 3.2.1 fix
   - DP fixes
   - Seamless boot fix
   - Fix call order in amdgpu_ttm_move()
   - Fix doorbell regression
   - Disable panel replay temporarily

  amdkfd:
   - Flush wq before creating kfd process

  xe:
   - Fix UAF on rebind worker
   - Fix ADL-N display integration

  imagination:
   - fix page-count macro

  nouveau:
   - avoid page-table allocation failures
   - fix firmware memory allocation

  panel:
   - ili9341: avoid OF for device properties; respect deferred probe;
     fix usage of errno codes

  ttm:
   - fix status output

  vmwgfx:
   - fix legacy display unit
   - fix read length in fence signalling"

* tag 'drm-fixes-2024-05-03' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
  drm/xe/display: Fix ADL-N detection
  drm/panel: ili9341: Use predefined error codes
  drm/panel: ili9341: Respect deferred probe
  drm/panel: ili9341: Correct use of device property APIs
  drm/xe/vm: prevent UAF in rebind_work_func()
  drm/amd/display: Disable panel replay by default for now
  drm/amdgpu: fix doorbell regression
  drm/amdkfd: Flush the process wq before creating a kfd_process
  drm/amd/display: Disable seamless boot on 128b/132b encoding
  drm/amd/display: Fix DC mode screen flickering on DCN321
  drm/amd/display: Add VCO speed parameter for DCN31 FPU
  drm/amdgpu: once more fix the call oder in amdgpu_ttm_move() v2
  drm/amd/display: Allocate zero bw after bw alloc enable
  drm/amd/display: Fix incorrect DSC instance for MST
  drm/amd/display: Atom Integrated System Info v2_2 for DCN35
  drm/amd/display: Add dtbclk access to dcn315
  drm/amd/display: Ensure that dmcub support flag is set for DCN20
  drm/amd/display: Handle Y carry-over in VCP X.Y calculation
  drm/amdgpu: Fix VRAM memory accounting
  drm/vmwgfx: Fix invalid reads in fence signaled events
  ...
2024-05-03 09:16:36 -07:00
Linus Torvalds
9fbc8bdf17 spi: Fixes for v6.9
A few small fixes for v6.9, the core fix is for issues with reuse of a
 spi_message in the case where we've got queued messages (a relatively
 rare occurrence with modern code so it wasn't noticed in testing).  We
 also avoid an issue with the Kunpeng driver by simply removing the debug
 interface that could trigger it, and address issues with confusing and
 corrupted output when printing the IP version of the AXI SPI engine.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmY0RbIACgkQJNaLcl1U
 h9Ao1wf/dSEewEiXc7VX1vVyF0LnHU71/36b/cJCLFErUNckHvDOa6Be3P0W8ThP
 WQrbpVizvSCr29hvyNwUtmWLdXFxjyj/69QsXT7NtNCofJTV9kQ5ILgtsj/Pe8Yr
 aVInONIqyuZlv3xEiRQIt+vnxmz3JM2zVdjFjcj1CrKpEbOob4VGUgwMLi0itvCJ
 F5WKiVDUMW/LnbEW5mPPyIPbAN1mKGKyGtW4Z9968/BYvUQzz5vzPOst0zvmkHJo
 SZ47n8G7rbcZXJB4TX62fOTp5gIm+/JQZKQ75MhmxlqYE4/ztZLsvqb9pG86c0+K
 NqJA/Yjs5rTE5oeIDwBUlSY8Orh0fA==
 =OIWj
 -----END PGP SIGNATURE-----

Merge tag 'spi-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A few small fixes for v6.9,

  The core fix is for issues with reuse of a spi_message in the case
  where we've got queued messages (a relatively rare occurrence with
  modern code so it wasn't noticed in testing).

  We also avoid an issue with the Kunpeng driver by simply removing the
  debug interface that could trigger it, and address issues with
  confusing and corrupted output when printing the IP version of the AXI
  SPI engine"

* tag 'spi-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fix null pointer dereference within spi_sync
  spi: hisi-kunpeng: Delete the dump interface of data registers in debugfs
  spi: axi-spi-engine: fix version format string
2024-05-03 09:12:28 -07:00
Ryan Roberts
5b32510af7 arm64/mm: Add uffd write-protect support
Let's use the newly-free PTE SW bit (58) to add support for uffd-wp.

The standard handlers are implemented for set/test/clear for both pte
and pmd. Additionally we must also track the uffd-wp state as a pte swp
bit, so use a free swap pte bit (3).

Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20240503144604.151095-5-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-05-03 17:03:34 +01:00
Ryan Roberts
55564814a8 arm64/mm: Move PTE_PRESENT_INVALID to overlay PTE_NG
PTE_PRESENT_INVALID was previously occupying bit 59, which when a PTE is
valid can either be IGNORED, PBHA[0] or AttrIndex[3], depending on the
HW configuration. In practice this is currently not a problem because
PTE_PRESENT_INVALID can only be 1 when PTE_VALID=0 and upstream Linux
always requires the bit set to 0 for a valid pte.

However, if in future Linux wants to use the field (e.g. AttrIndex[3])
then we could end up with confusion when PTE_PRESENT_INVALID comes along
and corrupts the field - we would ideally want to preserve it even for
an invalid (but present) pte.

The other problem with bit 59 is that it prevents the offset field of a
swap entry within a swap pte from growing beyond 51 bits. By moving
PTE_PRESENT_INVALID to a low bit we can lay the swap pte out so that the
offset field could grow to 52 bits in future.

So let's move PTE_PRESENT_INVALID to overlay PTE_NG (bit 11).

There is no need to persist NG for a present-invalid entry; it is always
set for user mappings and is not used by SW to derive any state from the
pte. PTE_NS was considered instead of PTE_NG, but it is RES0 for
non-secure SW, so there is a chance that future architecture may
allocate the bit and we may therefore need to persist that bit for
present-invalid ptes.

These are both marginal benefits, but make things a bit tidier in my
opinion.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20240503144604.151095-4-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-05-03 17:02:17 +01:00
Ryan Roberts
f0f5863a0f arm64/mm: Remove PTE_PROT_NONE bit
Currently the PTE_PRESENT_INVALID and PTE_PROT_NONE functionality
explicitly occupy 2 bits in the PTE when PTE_VALID/PMD_SECT_VALID is
clear. This has 2 significant consequences:

  - PTE_PROT_NONE consumes a precious SW PTE bit that could be used for
    other things.
  - The swap pte layout must reserve those same 2 bits and ensure they
    are both always zero for a swap pte. It would be nice to reclaim at
    least one of those bits.

But PTE_PRESENT_INVALID, which since the previous patch, applies
uniformly to page/block descriptors at any level when PTE_VALID is
clear, can already give us most of what PTE_PROT_NONE requires: If it is
set, then the pte is still considered present; pte_present() returns
true and all the fields in the pte follow the HW interpretation (e.g. SW
can safely call pte_pfn(), etc). But crucially, the HW treats the pte as
invalid and will fault if it hits.

So let's remove PTE_PROT_NONE entirely and instead represent PROT_NONE
as a present but invalid pte (PTE_VALID=0, PTE_PRESENT_INVALID=1) with
PTE_USER=0 and PTE_UXN=1. This is a unique combination that is not used
anywhere else.

The net result is a clearer, simpler, more generic encoding scheme that
applies uniformly to all levels. Additionally we free up a PTE SW bit
and a swap pte bit (bit 58 in both cases).

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20240503144604.151095-3-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-05-03 17:02:17 +01:00
Ryan Roberts
b28c74e259 arm64/mm: generalize PMD_PRESENT_INVALID for all levels
As preparation for the next patch, which frees up the PTE_PROT_NONE
present pte and swap pte bit, generalize PMD_PRESENT_INVALID to
PTE_PRESENT_INVALID. This will then be used to mark PROT_NONE ptes (and
entries at any other level) in the next patch.

While we're at it, fix up the swap pte format comment to include
PTE_PRESENT_INVALID. This is not new, it just wasn't previously
documented.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20240503144604.151095-2-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-05-03 17:02:16 +01:00
INAGAKI Hiroshi
bc2e07dfd2 block: fix and simplify blkdevparts= cmdline parsing
Fix the cmdline parsing of the "blkdevparts=" parameter using strsep(),
which makes the code simpler.

Before commit 146afeb235 ("block: use strscpy() to instead of
strncpy()"), we used a strncpy() to copy a block device name and partition
names. The commit simply replaced a strncpy() and NULL termination with
a strscpy(). It did not update calculations of length passed to strscpy().
While the length passed to strncpy() is just a length of valid characters
without NULL termination ('\0'), strscpy() takes it as a length of the
destination buffer, including a NULL termination.

Since the source buffer is not necessarily NULL terminated, the current
code copies "length - 1" characters and puts a NULL character in the
destination buffer. It replaces the last character with NULL and breaks
the parsing.

As an example, that buffer will be passed to parse_parts() and breaks
parsing sub-partitions due to the missing ')' at the end, like the
following.

example (Check Point V-80 & OpenWrt):

- Linux Kernel 6.6

  [    0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart8250,mmio32,0xf0512000 crashkernel=30M mvpp2x.queue_mode=1 blkdevparts=mmcblk1:48M@10M(kernel-1),1M(dtb-1),720M(rootfs-1),48M(kernel-2),1M(dtb-2),720M(rootfs-2),300M(default_sw),650M(logs),1M(preset_cfg),1M(adsl),-(storage) maxcpus=4
  ...
  [    0.884016] mmc1: new HS200 MMC card at address 0001
  [    0.889951] mmcblk1: mmc1:0001 004GA0 3.69 GiB
  [    0.895043] cmdline partition format is invalid.
  [    0.895704]  mmcblk1: p1
  [    0.903447] mmcblk1boot0: mmc1:0001 004GA0 2.00 MiB
  [    0.908667] mmcblk1boot1: mmc1:0001 004GA0 2.00 MiB
  [    0.913765] mmcblk1rpmb: mmc1:0001 004GA0 512 KiB, chardev (248:0)

  1. "48M@10M(kernel-1),..." is passed to strscpy() with length=17
     from parse_parts()
  2. strscpy() returns -E2BIG and the destination buffer has
     "48M@10M(kernel-1\0"
  3. "48M@10M(kernel-1\0" is passed to parse_subpart()
  4. parse_subpart() fails to find ')' when parsing a partition name,
     and returns error

- Linux Kernel 6.1

  [    0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart8250,mmio32,0xf0512000 crashkernel=30M mvpp2x.queue_mode=1 blkdevparts=mmcblk1:48M@10M(kernel-1),1M(dtb-1),720M(rootfs-1),48M(kernel-2),1M(dtb-2),720M(rootfs-2),300M(default_sw),650M(logs),1M(preset_cfg),1M(adsl),-(storage) maxcpus=4
  ...
  [    0.953142] mmc1: new HS200 MMC card at address 0001
  [    0.959114] mmcblk1: mmc1:0001 004GA0 3.69 GiB
  [    0.964259]  mmcblk1: p1(kernel-1) p2(dtb-1) p3(rootfs-1) p4(kernel-2) p5(dtb-2) 6(rootfs-2) p7(default_sw) p8(logs) p9(preset_cfg) p10(adsl) p11(storage)
  [    0.979174] mmcblk1boot0: mmc1:0001 004GA0 2.00 MiB
  [    0.984674] mmcblk1boot1: mmc1:0001 004GA0 2.00 MiB
  [    0.989926] mmcblk1rpmb: mmc1:0001 004GA0 512 KiB, chardev (248:0

By the way, strscpy() takes a length of destination buffer and it is
often confusing when copying characters with a specified length. Using
strsep() helps to separate the string by the specified character. Then,
we can use strscpy() naturally with the size of the destination buffer.

Separating the string on the fly is also useful to omit the redundant
string copy, reducing memory usage and improve the code readability.

Fixes: 146afeb235 ("block: use strscpy() to instead of strncpy()")
Suggested-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240421074005.565-1-musashino.open@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-03 09:57:53 -06:00
Arnd Bergmann
e3dff9c805 asm-generic: remove unused asm-generic/page.h
This file was used by c6x and blackfin in the past, but no architecture uses
it any more, and it is only useful for architectures that do not support
an MMU in the first place.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-03 17:40:01 +02:00
Eric Biggers
ee5814ddde fsverity: use register_sysctl_init() to avoid kmemleak warning
Since the fsverity sysctl registration runs as a builtin initcall, there
is no corresponding sysctl deregistration and the resulting struct
ctl_table_header is not used.  This can cause a kmemleak warning just
after the system boots up.  (A pointer to the ctl_table_header is stored
in the fsverity_sysctl_header static variable, which kmemleak should
detect; however, the compiler can optimize out that variable.)  Avoid
the kmemleak warning by using register_sysctl_init() which is intended
for use by builtin initcalls and uses kmemleak_not_leak().

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/r/CAHj4cs8DTSvR698UE040rs_pX1k-WVe7aR6N2OoXXuhXJPDC-w@mail.gmail.com
Cc: stable@vger.kernel.org
Reviewed-by: Joel Granados <j.granados@samsung.com>
Link: https://lore.kernel.org/r/20240501025331.594183-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2024-05-03 08:30:58 -07:00
Thomas Zimmermann
2fd001cd36
arch: Rename fbdev header and source files
The per-architecture fbdev code has no dependencies on fbdev and can
be used for any video-related subsystem. Rename the files to 'video'.
Use video-sti.c on parisc as the source file depends on CONFIG_STI_CORE.

On arc, arm, arm64, sh, and um the asm header file is an empty wrapper
around the file in asm-generic. Let Kbuild generate the file. The build
system does this automatically. Only um needs to generate video.h
explicitly, so that it overrides the host architecture's header. The
latter would otherwise interfere with the build.

Further update all includes statements, include guards, and Makefiles.
Also update a few strings and comments to refer to video instead of
fbdev.

v3:
- arc, arm, arm64, sh: generate asm header via build system (Sam,
Helge, Arnd)
- um: rename fb.h to video.h
- fix typo in commit message (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-03 17:07:50 +02:00
Thomas Zimmermann
f178e96de7
arch: Remove struct fb_info from video helpers
The per-architecture video helpers do not depend on struct fb_info
or anything else from fbdev. Remove it from the interface and replace
fb_is_primary_device() with video_is_primary_device(). The new helper
is similar in functionality, but can operate on non-fbdev devices.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-03 17:07:50 +02:00
Thomas Zimmermann
f25eae2c40
arch: Select fbdev helpers with CONFIG_VIDEO
Various Kconfig options selected the per-architecture helpers for
fbdev. But none of the contained code depends on fbdev. Standardize
on CONFIG_VIDEO, which will allow to add more general helpers for
video functionality.

CONFIG_VIDEO protects each architecture's video/ directory. This
allows for the use of more fine-grained control for each directory's
files, such as the use of CONFIG_STI_CORE on parisc.

v2:
- sparc: rebased onto Makefile changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-03 17:07:50 +02:00
Christoph Hellwig
0c12028aec block: refine the EOF check in blkdev_iomap_begin
blkdev_iomap_begin rounds down the offset to the logical block size
before stashing it in iomap->offset and checking that it still is
inside the inode size.

Check the i_size check to the raw pos value so that we don't try a
zero size write if iter->pos is unaligned.

Fixes: 487c607df7 ("block: use iomap for writes to block devices")
Reported-by: syzbot+0a3683a0a6fecf909244@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: syzbot+0a3683a0a6fecf909244@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20240503081042.2078062-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-03 09:05:11 -06:00
Thorsten Blum
9c313ccdfc
bitops: Change function return types from long to int
Change the return types of bitops functions (ffs, fls, and fns) from
long to int. The expected return values are in the range [0, 64], for
which int is sufficient.

Additionally, int aligns well with the return types of the corresponding
__builtin_* functions, potentially reducing overall type conversions.

Many of the existing bitops functions already return an int and don't
need to be changed. The bitops functions in arch/ should be considered
separately.

Adjust some return variables to match the function return types.

With GCC 13 and defconfig, these changes reduced the size of a test
kernel image by 5,432 bytes on arm64 and by 248 bytes on riscv; there
were no changes in size on x86_64, powerpc, or m68k.

Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-03 17:04:50 +02:00
Christoph Hellwig
a4217c6740 block: add a partscan sysfs attribute for disks
Userspace had been unknowingly relying on a non-stable interface of
kernel internals to determine if partition scanning is enabled for a
given disk. Provide a stable interface for this purpose instead.

Cc: stable@vger.kernel.org # 6.3+
Depends-on: 140ce28dd3 ("block: add a disk_has_partscan helper")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-block/ZhQJf8mzq_wipkBH@gardel-login/
Link: https://lore.kernel.org/r/20240502130033.1958492-3-hch@lst.de
[axboe: add links and commit message from Keith]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-03 09:00:07 -06:00
Christoph Hellwig
140ce28dd3 block: add a disk_has_partscan helper
Add a helper to check if partition scanning is enabled instead of
open coding the check in a few places.  This now always checks for
the hidden flag even if all but one of the callers are never reachable
for hidden gendisks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240502130033.1958492-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-03 08:59:59 -06:00
Valentina Fernandez
649bad67d4 dt-bindings: PCI: microchip: increase number of items in ranges property
Increase the number of items in the ranges property to allow up to 3
ranges. For example a prefetchable range, a non-prefetchable range
and an IO range, depending on configuration.

Signed-off-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240327-debunk-perky-f5514ca332be@spud
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-05-03 09:22:22 -05:00
Ulf Hansson
d88ea30340 pmdomain: Merge branch fixes into next
Merge the pmdomain fixes for v6.9-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.10.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-05-03 15:48:21 +02:00
Karthikeyan Kathirvel
50971dc669 wifi: ath12k: drop failed transmitted frames from metric calculation.
In mesh node traffic, internal firmware-transmitted failures are
reported as transmitted failures in mesh metric calculation, leading
to the breakage of the mesh link.

Fix the issue by dropping the internal firmware-transmitted failures
before updating the TX completion status to mac80211, in order to
prevent false failure averaging in mesh metric calculation.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240430074313.885807-3-quic_kathirve@quicinc.com
2024-05-03 16:21:31 +03:00
Sven Eckelmann
5453bbd6fe wifi: ath12k: Don't drop tx_status in failure case
When a station idles for a long time, hostapd will try to send
a QoS Null frame to the station as "poll". NL80211_CMD_PROBE_CLIENT
is used for this purpose.
And the skb will be added to ack_status_frame - waiting for a
completion via ieee80211_report_ack_skb().

But when the peer was already removed before the tx_complete arrives,
the peer will be missing. And when using dev_kfree_skb_any (instead
of going through mac80211), the entry will stay inside
ack_status_frames thus not clean up related information in its
internal data structures. This IDR will therefore run full after
8K request were generated for such clients.
At this point, the access point will then just stall and not allow
any new clients because idr_alloc() for ack_status_frame will fail.

ieee80211_free_txskb() on the other hand will (when required) call
ieee80211_report_ack_skb() and make sure that (when required) remove
the entry from the ack_status_frame and clean up related
information in its internal data structures.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-1-c0af729d6229@narfation.org
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240430074313.885807-2-quic_kathirve@quicinc.com
2024-05-03 16:21:31 +03:00
Tomi Valkeinen
670c900f69 pmdomain: ti-sci: Fix duplicate PD referrals
When the dts file has multiple referrers to a single PD (e.g.
simple-framebuffer and dss nodes both point to the DSS power-domain) the
ti-sci driver will create two power domains, both with the same ID, and
that will cause problems as one of the power domains will hide the other
one.

Fix this checking if a PD with the ID has already been created, and only
create a PD for new IDs.

Fixes: efa5c01cd7 ("soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240415-ti-sci-pd-v1-1-a0e56b8ad897@ideasonboard.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-05-03 15:20:05 +02:00
Karthikeyan Periyasamy
53bf4a14f8 wifi: ath12k: add multi device support for WBM idle ring buffer setup
Currently, inter device MLO is not supported. Therefore, the WBM idle ring
buffers choose the implicit return buffer manager (DEV0_IDLE_DESC_LIST).
However, this implicit return buffer manager design is not meeting the
requirements to support inter device MLO. In inter device MLO, multiple
devices participate. The device specific WBM idle ring buffers transmit
to multiple device REO rings. To distinguish between device specific WBM
idle buffers, the setup configuration need to choose a different return
buffer manager based on the unique identifier (device index).

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240430165811.1377182-5-quic_periyasa@quicinc.com
2024-05-03 16:19:24 +03:00
Karthikeyan Periyasamy
b2d54ca73a wifi: ath12k: Introduce device index
Introduce a device index parameter in the ath12k_base structure. This
value is used as unique identifier for devices involved in Inter-device
MLO. It is also used to configure the MLO parameter within the QMI host
capability send request. While currently set to zero, future logic will
be added for inter device support to populate this parameter with
non-zero values.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240430165811.1377182-4-quic_periyasa@quicinc.com
2024-05-03 16:19:23 +03:00
Karthikeyan Periyasamy
acc6afb31c wifi: ath12k: Refactor idle ring descriptor setup
Currently, the WBM idle ring descriptor setup uses implicit value
HAL_RX_BUF_RBM_WBM_DEV0_IDLE_DESC_LIST for the return buffer manager
parameter. To support inter-device MLO (Multi-link operation), this
parameter needs to be configure dynamically based on the device identifier
within the MLO group. Therefore, introduce a new argument to the helper
function ath12k_hal_set_link_desc_addr().

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240430165811.1377182-3-quic_periyasa@quicinc.com
2024-05-03 16:19:23 +03:00
Karthikeyan Periyasamy
5f6c3a418b wifi: ath12k: Replace "chip" with "device" in hal Rx return buffer manager
Prefer the term "device" over "chip". Therefore, modify the relevant terms
in hal Rx return buffer manager to use "device" instead.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240430165811.1377182-2-quic_periyasa@quicinc.com
2024-05-03 16:19:23 +03:00
George Guo
588de8c6d3 arm64: simplify arch_static_branch/_jump function
Extracted the jump table definition code from the arch_static_branch and
arch_static_branch_jump functions into a macro JUMP_TABLE_ENTRY to reduce
code duplication.

Signed-off-by: George Guo <guodongtai@kylinos.cn>
Link: https://lore.kernel.org/r/20240430085655.2798551-2-dongtai.guo@linux.dev
Signed-off-by: Will Deacon <will@kernel.org>
2024-05-03 14:16:36 +01:00
Jeff Johnson
c57d00a4d3 wifi: ath11k: unmap the CE in ath11k_ahb_probe() error path
Currently, in ath11k_ahb_probe(), if a failure occurs after
ath11k_ahb_ce_remap() is called, and if hw_params->ce_remap is
enabled, the CE register memory is not unmapped. So add a call to
ath11k_ahb_ce_unmap() in the error path.

This issue was identified by smatch/smatch_scripts/kchecker:

drivers/net/wireless/ath/ath11k/ahb.c:1218 ath11k_ahb_probe() warn: 'ab->mem_ce' from ioremap() not released on lines: 1218.

Since this is a rare error path with no simple way to test, and since
the change is trivial to review, compile tested only.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240430-ce-unmap-v1-2-e468328f95d9@quicinc.com
2024-05-03 16:15:16 +03:00
Jeff Johnson
8b9ea752a9 wifi: ath11k: refactor CE remap & unmap
Currently the logic that handles hw_params->ce_remap is inline code,
both for doing the remap and the unmap. An upcoming change needs to do
the unmap in a second place, so refactor the unmap logic into a
separate function. And although it is only called from one place,
refactor the remap logic as well to have functional symmetry.

No functional changes, compile tested only.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240430-ce-unmap-v1-1-e468328f95d9@quicinc.com
2024-05-03 16:15:16 +03:00
chenqiwu
410e471f87 arm64: Add USER_STACKTRACE support
Currently, userstacktrace is unsupported for ftrace and uprobe
tracers on arm64. This patch uses the perf_callchain_user() code
as blueprint to implement the arch_stack_walk_user() which add
userstacktrace support on arm64.
Meanwhile, we can use arch_stack_walk_user() to simplify the
implementation of perf_callchain_user().
This patch is tested pass with ftrace, uprobe and perf tracers
profiling userstacktrace cases.

Tested-by: chenqiwu <qiwu.chen@transsion.com>
Signed-off-by: chenqiwu <qiwu.chen@transsion.com>
Link: https://lore.kernel.org/r/20231219022229.10230-1-qiwu.chen@transsion.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-05-03 14:12:45 +01:00
Karthikeyan Periyasamy
acaa84009f wifi: ath12k: Add lock to protect the hardware state
Currently, hardware state is not protected across the reconfigure
operations. However, in single wiphy models, multiple radio/links is
exposed as a MAC hardware (ieee80211_hw) through the driver hardware
abstraction (ath12k_hw) layer. In such scenario, we need to protect
hardware state across the multiple radio/link at the driver hardware
abstraction (ath12k_hw) layer. Therefore, introduce a new mutex in
the ath12k_hw layer.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240425090307.3233434-4-quic_periyasa@quicinc.com
2024-05-03 16:12:14 +03:00
Karthikeyan Periyasamy
9b4e5caaf5 wifi: ath12k: Refactor the hardware state
Currently, in multi wiphy models, the mac80211 hardware state is maintained
within the radio/link structure. However, in single wiphy models, the
mac80211 hardware state is needed at the hardware abstraction layer
(ath12k_hw). Therefore, move the hardware state from the radio/link
structure to the hardware abstraction layer (ath12k_hw). Additionally,
update the naming convention of the state enums to enhance clarity and
consistency.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240425090307.3233434-3-quic_periyasa@quicinc.com
2024-05-03 16:12:14 +03:00
Karthikeyan Periyasamy
ecd509b6f2 wifi: ath12k: Refactor the hardware recovery procedure
Currently, in multi-wiphy models, the recovery handler access mac80211
HW from the radio/link structure. This will be incorrect for single wiphy
model, as they will hold multiple link/radio structures. To fix this,
access mac80211 HW based on the number of hardware in the SoC/chip. This
approach makes the recovery handler compatible with both multi wiphy and
single wiphy models.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240425090307.3233434-2-quic_periyasa@quicinc.com
2024-05-03 16:12:13 +03:00
Joerg Roedel
278bd82c74 Arm SMMU updates for 6.10
- SMMUv2:
   * Support for fault debugging hardware on Qualcomm implementations
   * Re-land support for the ->domain_alloc_paging() callback
 
 - SMMUv3:
   * Improve handling of MSI allocation failure
   * Drop support for the "disable_bypass" cmdline option
   * Major rework of the CD creation code, following on directly from the
     STE rework merged last time around.
   * Add unit tests for the new STE/CD manipulation logic
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmYzebsQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNO8OB/9mEoD8wx1QjNfG0M1YNGTADBHyu25zsC7U
 ttKcq/1G7r1F+9VwqC3YLJdXYcbGe971j6mFGqxSlIpay29ZipHOqDHj/ys3P1T5
 fxgEGQxufIUUjbOJUdQZY89HBuBRrmC87da2ge27KoFa4Z3vo4U48B09aRBVdMCN
 Ku3L1eoSItrID3ANUWTPpJeaYjULKn/9URpGmCBYsMBda4DCGRAN6ncv3bNVV4IE
 vrPm5K2B0OA9vEi+Am8zn+VZYzCoddjtV8FZapl1Hs0cL6om5qlyM6sVHak5mn8C
 mOYXuupXJQEQMN79cDaS+8Yl2UsUdXYZBuTHCOiNibrYWMOw+qfP
 =LOvv
 -----END PGP SIGNATURE-----

Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu

Arm SMMU updates for 6.10

- SMMUv2:
  * Support for fault debugging hardware on Qualcomm implementations
  * Re-land support for the ->domain_alloc_paging() callback

- SMMUv3:
  * Improve handling of MSI allocation failure
  * Drop support for the "disable_bypass" cmdline option
  * Major rework of the CD creation code, following on directly from the
    STE rework merged last time around.
  * Add unit tests for the new STE/CD manipulation logic
2024-05-03 15:08:30 +02:00
Sunil Khatri
b0923d5d80 drm/amdgpu: remove ip dump reg_count variable
reg_count is not used and the register count is
directly derived from the array size and hence
removed.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-03 09:06:47 -04:00
Alex Hung
9243e0e206 drm/amd/display: Fix uninitialized variables in dcn401 and dml21
This fixes 12 UNINIT issues reported by Coverity.

Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-03 09:06:47 -04:00
Alex Hung
b3f4ee8e4a drm/amd/display: Assign disp_cfg_index_max when dml21
[WHY & HOW]
The assignment of disp_cfg_index_max is missed and should be
assigned to __DML2_WRAPPER_MAX_STREAMS_PLANES__.

Fixes: 55ec7679e6 ("drm/amd/display: Limit array index according to architecture")
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-03 09:06:12 -04:00
Kalle Valo
f41c7cab87 wifi: ath11k: ath11k_mac_op_ipv6_changed(): use list_for_each_entry()
Simplify the loop by using list_for_each_entry(). No functional changes.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/20240411165516.4070649-3-kvalo@kernel.org
2024-05-03 16:04:05 +03:00
Francois Dugast
7867541241
drm/xe/debugfs: Get a runtime_pm reference when setting wedged mode
This function is another entry point where it must be ensured that
the device resumes before operating on the GuC, so grab a runtime_pm
reference. This fixes inner xe_pm_runtime_get_noresume calls which
were previously failing.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503082450.268335-1-francois.dugast@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-05-03 08:54:32 -04:00
Rob Herring (Arm)
15be4f7ce5 dt-bindings: Drop unnecessary quotes on keys
The yamllint quoted-strings check wasn't checking keys for quotes, but
support for checking keys was added in 1.34 release. Fix all the errors
found when enabling the check.

Clean-up the xilinx-versal-cpm formatting while we're here.

Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240426202239.2837516-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-05-03 07:50:05 -05:00
Rob Herring (Arm)
27db752673 dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop unnecessary quotes
Drop unnecessary quotes which aren't needed in yaml. This is checked by
yamllint, but this case was excluded due to the comma and yamllint's
mishandling of some cases with commas. That's now fixed in yamllint
1.34.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240426195404.2771046-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-05-03 07:50:05 -05:00
Shresth Prasad
3fe5a2b9e7 of: property: Use scope based cleanup on port_node
Use __free cleanup handler which ensures that the resource is freed when
it goes out of scope, thus removing the need to manually clean it up
using of_node_put.

Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Shresth Prasad <shresthprasad7@gmail.com>
Link: https://lore.kernel.org/r/20240428115226.41345-2-shresthprasad7@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-05-03 07:50:04 -05:00
Oreoluwa Babatunde
c56436ef17 of: reserved_mem: Remove the use of phandle from the reserved_mem APIs
The __find_rmem() function is the only place that references the phandle
field of the reserved_mem struct. __find_rmem() is used to match a
device_node object to its corresponding entry in the reserved_mem array
using its phandle value. But, there is already a function called
of_reserved_mem_lookup() which carries out the same action using the
name of the node.

Using the of_reserved_mem_lookup() function is more reliable because
every node is guaranteed to have a name, but not all nodes will have a
phandle.

Nodes are only assigned a phandle if they are explicitly defined in the
DT using "phandle = <phandle_number>", or if they are referenced by
another node in the DT. Hence, If the phandle field is empty, then
__find_rmem() will return a false negative.

Hence, delete the __find_rmem() function and switch to using the
of_reserved_mem_lookup() function to find the corresponding entry of a
device_node in the reserved_mem array. Since the phandle field of the
reserved_mem struct is now unused, delete that as well.

Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Link: https://lore.kernel.org/r/20240502192403.3307277-1-quic_obabatun@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-05-03 07:49:13 -05:00
Lad Prabhakar
35eea0defb mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs
- RZ/G2UL and RZ/Five ("r9a07g043")
- RZ/G2L(C) ("r9a07g044")
- RZ/V2L ("r9a07g054")
- RZ/G3S ("r9a08g045")
- RZ/V2M ("r9a09g011")

The above SoCs have HS400 disabled and use fixed address mode. Add a
generic compatible 'renesas,rzg2l-sdhi' fallback string for these SoCs,
where fixed_addr_mode and hs400_disabled quirks are applied.

For backward compatibility, compatible string 'renesas,sdhi-r9a09g011' for
RZ/V2M is retained.

Also rename sdhi_quirks_r9a09g011->sdhi_quirks_rzg2l and
of_r9a09g011_compatible->of_rzg2l_compatible to make it generic.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430145937.133643-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-05-03 14:33:05 +02:00
Lad Prabhakar
d640af49b6 dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility
- RZ/G2UL and RZ/Five ("r9a07g043")
- RZ/G2L(C) ("r9a07g044")
- RZ/V2L ("r9a07g054")
- RZ/G3S ("r9a08g045")
- RZ/V2M ("r9a09g011")

The SD/MMC Interface in the above listed SoCs is not identical to that of
R-Car Gen3. These SoCs have HS400 disabled and use fixed address mode.
Therefore, we need to apply fixed_addr_mode and hs400_disabled quirks.

Document 'renesas,rzg2l-sdhi' as a generic compatible string for the
above SoCs.

Also now use the 'renesas,rzg2l-sdhi' string in the if check for making
sure the required clocks are present.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240430145937.133643-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-05-03 14:33:04 +02:00
Lad Prabhakar
493d2b2969 dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list
Group single const value items into an enum list.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240430145937.133643-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-05-03 14:33:04 +02:00
Claudiu Beznea
68dbe38ed7 mmc: renesas_sdhi: Set the SDBUF after reset
For development purpose, renesas_sdhi_probe() could be called w/
dma_ops = NULL to force the usage of PIO mode. In this case the
renesas_sdhi_enable_dma() will not be called before transferring data.

If renesas_sdhi_enable_dma() is not called, renesas_sdhi_clk_enable()
call from renesas_sdhi_probe() will configure SDBUF by calling the
renesas_sdhi_sdbuf_width() function, but then SDBUF will be reset in
tmio_mmc_host_probe() when calling tmio_mmc_reset() though host->reset().
If SDBUF is zero the data transfer will not work in PIO mode for RZ/G3S.

To fix this call again the renesas_sdhi_sdbuf_width(host, 16) in
renesas_sdhi_reset(). The call of renesas_sdhi_sdbuf_width() was not
removed from renesas_sdhi_clk_enable() as the host->reset() is optional.

Co-developed-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430093724.2692232-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-05-03 14:30:49 +02:00
David S. Miller
5829614a7b Merge branch 'net-sysctl-sentinel'
Joel Granados says:

====================
sysctl: Remove sentinel elements from networking

What?
These commits remove the sentinel element (last empty element) from the
sysctl arrays of all the files under the "net/" directory that register
a sysctl array. The merging of the preparation patches [4] to mainline
allows us to just remove sentinel elements without changing behavior.
This is safe because the sysctl registration code (register_sysctl() and
friends) use the array size in addition to checking for a sentinel [1].

Why?
By removing the sysctl sentinel elements we avoid kernel bloat as
ctl_table arrays get moved out of kernel/sysctl.c into their own
respective subsystems. This move was started long ago to avoid merge
conflicts; the sentinel removal bit came after Mathew Wilcox suggested
it to avoid bloating the kernel by one element as arrays moved out. This
patchset will reduce the overall build time size of the kernel and run
time memory bloat by about ~64 bytes per declared ctl_table array (more
info here [5]).

When are we done?
There are 4 patchest (25 commits [2]) that are still outstanding to
completely remove the sentinels: files under "net/" (this patchset),
files under "kernel/" dir, misc dirs (files under mm/ security/ and
others) and the final set that removes the unneeded check for ->procname
== NULL.

Testing:
* Ran sysctl selftests (./tools/testing/selftests/sysctl/sysctl.sh)
* Ran this through 0-day with no errors or warnings

Savings in vmlinux:
  A total of 64 bytes per sentinel is saved after removal; I measured in
  x86_64 to give an idea of the aggregated savings. The actual savings
  will depend on individual kernel configuration.
    * bloat-o-meter
        - The "yesall" config saves 3976 bytes (bloat-o-meter output [6])
        - A reduced config [3] saves 1263 bytes (bloat-o-meter output [7])

Savings in allocated memory:
  None in this set but will occur when the superfluous allocations are
  removed from proc_sysctl.c. I include it here for context. The
  estimated savings during boot for config [3] are 6272 bytes. See [8]
  for how to measure it.

Comments/feedback greatly appreciated

Changes in v6:
- Rebased onto net-next/main.
- Besides re-running my cocci scripts, I ran a new find script [9].
  Found 0 hits in net/
- Moved "i" variable declaraction out of for() in sysctl_core_net_init
- Removed forgotten sentinel in mpls_table
- Removed CONFIG_AX25_DAMA_SLAVE guard from net/ax25/ax25_ds_timer.c. It
  is not needed because that file is compiled only when
  CONFIG_AX25_DAMA_SLAVE is set.
- When traversing smc_table, stop on ARRAY_SIZE instead of ARRAY_SIZE-1.
- Link to v5: https://lore.kernel.org/r/20240426-jag-sysctl_remset_net-v5-0-e3b12f6111a6@samsung.com

Changes in v5:
- Added net files with additional variable to my test .config so the
  typo can be caught next time.
- Fixed typo tabel_size -> table_size
- Link to v4: https://lore.kernel.org/r/20240425-jag-sysctl_remset_net-v4-0-9e82f985777d@samsung.com

Changes in v4:
- Keep reverse xmas tree order when introducing new variables
- Use a table_size variable to keep the value of ARRAY_SIZE
- Separated the original "networking: Remove the now superfluous
  sentinel elements from ctl_table arra" into smaller commits to ease
  review
- Merged x.25 and ax.25 commits together.
- Removed any SOB from the commits that were changed
- Link to v3: https://lore.kernel.org/r/20240412-jag-sysctl_remset_net-v3-0-11187d13c211@samsung.com

Changes in v3:
- Reworkded ax.25
  - Added a BUILD_BUG_ON for the ax.25 commit
  - Added a CONFIG_AX25_DAMA_SLAVE guard where needed
- Link to v2: https://lore.kernel.org/r/20240328-jag-sysctl_remset_net-v2-0-52c9fad9a1af@samsung.com

Changes in v2:
- Rebased to v6.9-rc1
- Removed unneeded comment from sysctl_net_ax25.c
- Link to v1: https://lore.kernel.org/r/20240314-jag-sysctl_remset_net-v1-0-aa26b44d29d9@samsung.com
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-03 13:29:43 +01:00
Joel Granados
78a7b5dbc0 ax.25: x.25: Remove the now superfluous sentinel elements from ctl_table array
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which will
reduce the overall build time size of the kernel and run time memory
bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)

Avoid a buffer overflow when traversing the ctl_table by ensuring that
AX25_MAX_VALUES is the same as the size of ax25_param_table. This is
done with a BUILD_BUG_ON where ax25_param_table is defined and a
CONFIG_AX25_DAMA_SLAVE guard in the unnamed enum definition as well as
in the ax25_dev_device_up and ax25_ds_set_timer functions.

The overflow happened when the sentinel was removed from
ax25_param_table. The sentinel's data element was changed when
CONFIG_AX25_DAMA_SLAVE was undefined. This had no adverse effects as it
still stopped on the sentinel's null procname but needed to be addressed
once the sentinel was removed.

Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-03 13:29:43 +01:00