TPS65224 is a Power Management IC with 4 Buck regulators and 3 LDO
regulators, it includes additional features like GPIOs, watchdog, ESMs
(Error Signal Monitor), and PFSM (Pre-configurable Finite State Machine)
managing the state of the device.
In addition TPS65224 has support for 12-bit ADC and does not have RTC
unlike TPS6594.
Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/0109018f2f26a14f-157bb3a2-2f9b-4653-a619-46e1feb8f229-000000@ap-south-1.amazonses.com
Signed-off-by: Lee Jones <lee@kernel.org>
Extend TPS6594 PMIC register and field definitions to support TPS65224
power management IC.
TPS65224 is software compatible to TPS6594 and can re-use many of the
same definitions, new definitions are added to support additional
controls available on TPS65224.
Signed-off-by: Nirmala Devi Mal Nadar <m.nirmaladevi@ltts.com>
Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com>
Link: https://lore.kernel.org/r/0109018f2f265d30-a87711fa-31d9-48db-b8cb-7109d0213e2e-000000@ap-south-1.amazonses.com
Signed-off-by: Lee Jones <lee@kernel.org>
When no mode is set, the utility pin appears to be grounded. No signal
is getting through.
This is problematic because ARC and eARC use this line and may do so even
if no display mode is set.
This change enable the bandgap setting on g12 chip, which fix the problem
with the utility pin. This is done by restoring init values on PHY init and
disable.
Fixes: 3b7c1237a7 ("drm/meson: Add G12A support for the DW-HDMI Glue")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240426160256.3089978-3-jbrunet@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426160256.3089978-3-jbrunet@baylibre.com
The phy is not in a useful state right after init. It will become useful,
including for auxiliary function such as CEC or ARC, after the first mode
is set. This is a problem on systems where the display is using another
interface like DSI or CVBS.
This change refactor the init and mode change callback to power up the PHY
on init and leave only what is necessary for mode changes in the related
function. This is enough to fix CEC operation when HDMI display is not
enabled.
Fixes: 3f68be7d8e ("drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240426160256.3089978-2-jbrunet@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426160256.3089978-2-jbrunet@baylibre.com
The pinctrl instances hsi1, gsactrl, and gsacore need a clock for
register access to work.
Since we haven't implemented the relevant CMUs for the clocks required
by these instances just add empty clocks for now so as to make the DT
pass the validation checks.
Once the clocks are implmented in the gs101 clock driver, these should
be updated then.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240430-samsung-pinctrl-busclock-dts-v2-4-14fc988139dd@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The system hangs when any of these clocks are turned off.
With the introduction of pinctrl clock support [1], the approach taken
in this clock driver for the APM clocks to rely solely on the
clk_ignore_unused kernel command line option does not work anymore and
the system hangs during boot.
gout_apm_func is a parent clock to the clocks that are going to be
handled by the pinctrl driver [2], namely
gout_apm_apbif_gpio_alive_pclk and gout_apm_apbif_gpio_far_alive_pclk.
It also is the parent to the clocks marked as critical in this commit
here (and some others that aren't relevant for this commit)). This
means that once the pinctrl driver decides to turn off clocks, the
clock framework will subsequently turn off parent clocks of those
pinctrl clocks if they have no (apparent) user. Since gout_apm_func is
the parent, and since no drivers are hooked up to it or any of its
other children, gout_apm_func will be turned off. This will cause the
system to hang, as the clocks marked as critical in this commit stop
having an input.
We might have to add a driver for these clocks, but in the meantime
let's just ensure they stay on even if siblings are turned off.
For the avoidance of doubt: This commit doesn't mean that we can boot
without clk_ignore_unused.
Link: https://lore.kernel.org/r/20240426-samsung-pinctrl-busclock-v3-0-adb8664b8a7e@linaro.org [1]
Link: https://lore.kernel.org/r/20240429-samsung-pinctrl-busclock-dts-v1-0-5e935179f3ca@linaro.org [2]
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240430-gs101-apm-clocks-v1-1-b2e2335e84f5@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Advertise support for BSS color and then once the countdown reaches 0,
call color change finish.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240422053412.2024075-8-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, during color change, no link id information is passed down.
In order to support color change during Multi Link Operation, it is
required to pass link id as well.
Additionally, update notification APIs to allow drivers/mac80211 to
pass the link ID.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240422053412.2024075-2-quic_adisi@quicinc.com
Link: https://msgid.link/20240422053412.2024075-3-quic_adisi@quicinc.com
[squash, actually only pass 0 from mac80211]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for rk816 to the existing rk808 regulator driver.
The infrastructure of the driver can be re-used as is. A peculiarity for
this version is, that BUCK1/BUCK2 have a (common) bit which needs to
toggled after a voltage change to confirm the change. Regulator regmap
takes care of that by defining a apply_bit and apply_reg for those
regulators.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240416161237.2500037-6-knaerzche@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
rk808_set_suspend_voltage_range currently does not account the existence of
apply_bit/apply_reg.
This adds support for those in same way it is done in
regulator_set_voltage_sel_regmap and is required for the upcoming RK816
support
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240416161237.2500037-5-knaerzche@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This adds support for RK816 to the exising rk805 pinctrl driver
It has a single pin which can be configured as input from a thermistor (for
instance in an attached battery) or as a gpio.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240416161237.2500037-4-knaerzche@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This integrates RK816 support in the this existing rk8xx mfd driver.
This version has unaligned interrupt registers, which requires to define a
separate get_irq_reg callback for the regmap. Apart from that the
integration is straightforward and the existing structures can be used as
is. The initialization sequence has been taken from vendor kernel.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20240416161237.2500037-3-knaerzche@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add DT binding document for Rockchip's RK816 PMIC
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240416161237.2500037-2-knaerzche@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
wdev->valid_links is not cleared when upper layer disconnect from a
wdev->AP MLD. It has been observed that this would prevent offchannel
operations like remain-on-channel which would be needed for user space
operations with Public Action frame.
Clear the wdev->valid_links when STA disconnects.
Signed-off-by: Xin Deng <quic_deng@quicinc.com>
Link: https://msgid.link/20240426092501.8592-1-quic_deng@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
struct net_device shouldn't be embedded into any structure, instead,
the owner should use the priv space to embed their state into net_device.
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_device from struct iwl_trans_pcie by converting it
into a pointer. Then use the leverage alloc_netdev() to allocate the
net_device object at iwl_trans_pcie_alloc.
The private data of net_device becomes a pointer for the struct
iwl_trans_pcie, so, it is easy to get back to the iwl_trans_pcie parent
given the net_device object.
[1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://msgid.link/20240501165417.3406039-1-leitao@debian.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently we dma_map on ttm_tt population and dma_unmap when
the pages are released in ttm_tt unpopulate.
Strictly, the dma_map is not needed until the bo is moved to the
XE_PL_TT placement, so perform the dma_mapping on such moves
instead, and remove the dma_mappig when moving to XE_PL_SYSTEM.
This is desired for the upcoming shrinker series where shrinking
of a ttm_tt might fail. That would lead to an odd construct where
we first dma_unmap, then shrink and if shrinking fails dma_map
again. If dma_mapping instead is performed on move like this,
shrinking does not need to care at all about dma mapping.
Finally, where a ttm_tt is destroyed while bound to a different
memory type than XE_PL_SYSTEM, we keep the dma_unmap in
unpopulate().
v2:
- Don't accidently unmap the dma-buf's sgtable.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502183251.10170-1-thomas.hellstrom@linux.intel.com
MT7622 pinctrl has ANTSEL* pins. Linux support for those was added in
the commit 19f599e83a ("pinctrl: mediatek: mt7622: add antsel
pins/groups"). Include them in binding.
Cc: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Rob Herring <robh@kernel.org>
Message-ID: <20240423045502.7778-2-zajec5@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some properties (function groups & pins) are meant to be arrays and
should allow multiple entries out of enum sets. Use "items" for those.
Mistake was noticed during validation of in-kernel DTS files.
Fixes: b9ffc18c63 ("dt-bindings: mediatek: convert pinctrl to yaml")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Rob Herring <robh@kernel.org>
Message-ID: <20240423045502.7778-1-zajec5@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Before request->channels[] can be used, request->n_channels must be set.
Additionally, address calculations for memory after the "channels" array
need to be calculated from the allocation base ("request") rather than
via the first "out of bounds" index of "channels", otherwise run-time
bounds checking will throw a warning.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: e3eac9f32e ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://msgid.link/20240424220057.work.819-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This appears to work around a deadlock regression that came in
with the LED merge in 6.9.
The deadlock happens on my system with 24 iwlwifi radios, so maybe
it something like all worker threads are busy and some work that needs
to complete cannot complete.
Link: https://lore.kernel.org/linux-kernel/20240411070718.GD6194@google.com/
Fixes: f5c31bcf60 ("Merge tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds")
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://msgid.link/20240430234212.2132958-1-greearb@candelatech.com
[also remove unnecessary "load_module" var and now-wrong comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
What happens here is almost certainly wrong. However,
* it's the last remaining user of ->bd_inode anywhere in the tree
* it is *NOT* a fast path by any stretch of imagination
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I suspect that inode_attach_wb() use is rather unidiomatic, but
that's a separate story - in any case, its use is a few times
per mount *and* the route by which we access that inode is
"the host of address_space a page belongs to".
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Here we know that bdevfs inodes are coallocated with struct block_device
and we can get to ->bd_inode value without any dereferencing. Introduce
an inlined helper (static, *not* exported, purely internal for bdev.c)
that gets an associated inode by block_device - BD_INODE(bdev).
NOTE: leave it static; nobody outside of block/bdev.c has any business
playing with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
bdev_unhash(): make block device invisible to lookups by device number
bdev_drop(): drop reference to associated inode.
Both are internal, for use by genhd and partition-related code - similar
to bdev_add(). The logics in there (especially the lifetime-related
parts of it) ought to be cleaned up, but that's a separate story; here
we just encapsulate getting to associated inode.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
disk_live() and block_size() access bd_inode directly, prepare to remove
the field bd_inode from block_device, and only access bd_inode in block
layer.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20240411145346.2516848-8-viro@zeniv.linux.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
All we need is size, and that can be obtained via bdev_nr_bytes()
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20240411145346.2516848-11-viro@zeniv.linux.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
going to be faster, actually - shift is cheaper than dereference...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20240411145346.2516848-9-viro@zeniv.linux.org.uk
Reviewed-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
bdev_sectors() is not used hence remove it.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20240411145346.2516848-10-viro@zeniv.linux.org.uk
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Christian Brauner <brauner@kernel.org>
block_device_ejected() is added by commit bdfe0cbd74 ("Revert
"ext4: remove block_device_ejected"") in 2015. At that time 'bdi->wb'
is destroyed synchronized from del_gendisk(), hence if ext4 is still
mounted, and then mark_buffer_dirty() will reference destroyed 'wb'.
However, such problem doesn't exist anymore:
- commit d03f6cdc1f ("block: Dynamically allocate and refcount
backing_dev_info") switch bdi to use refcounting;
- commit 13eec2363e ("fs: Get proper reference for s_bdi"), will grab
additional reference of bdi while mounting, so that 'bdi->wb' will not
be destroyed until generic_shutdown_super().
Hence remove this dead function block_device_ejected().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20240411145346.2516848-7-viro@zeniv.linux.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
When building for LoongArch with clang 18.0.0, the stack usage of
probe() is larger than the allowed 2048 bytes:
drivers/media/dvb-frontends/mxl5xx.c:1698:12: warning: stack frame size (2368) exceeds limit (2048) in 'probe' [-Wframe-larger-than]
1698 | static int probe(struct mxl *state, struct mxl5xx_cfg *cfg)
| ^
1 warning generated.
This is the result of the linked LLVM commit, which changes how the
arrays of structures in config_ts() get handled with
CONFIG_INIT_STACK_ZERO and CONFIG_INIT_STACK_PATTERN, which causes the
above warning in combination with inlining, as config_ts() gets inlined
into probe().
This warning can be easily fixed by moving the array of structures off
of the stackvia 'static const', which is a better location for these
variables anyways because they are static data that is only ever read
from, never modified, so allocating the stack space is wasteful.
This drops the stack usage from 2368 bytes to 256 bytes with the same
compiler and configuration.
Link: https://lore.kernel.org/linux-media/20240111-dvb-mxl5xx-move-structs-off-stack-v1-1-ca4230e67c11@kernel.org
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/1977
Link: afe8b93ffd
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>