Use menu_for_each_entry() to traverse the menu tree instead of
implementing similar logic in each function.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Several functions require traversing menu entries sequentially. This
commit introduces some helpers to simplify such operations.
The menu_next() function facilitates depth-first traversal:
1. Descend to the child level if the current menu has one
2. Move to the next sibling at the same level if available
3. Ascend to the parent level if there is no more child or sibling
The menu_for_each_sub_entry() macro iterates over all submenu entries
using depth-first traverse.
The menu_for_each_entry() macro is the same, but over all menu entries.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Weak references are references that are permitted to remain unsatisfied
in the final link. This means they cannot be implemented using place
relative relocations, resulting in GOT entries when using position
independent code generation.
The notes section should always exist, so the weak annotations can be
omitted.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
kallsyms is a directory of all the symbols in the vmlinux binary, and so
creating it is somewhat of a chicken-and-egg problem, as its non-zero
size affects the layout of the binary, and therefore the values of the
symbols.
For this reason, the kernel is linked more than once, and the first pass
does not include any kallsyms data at all. For the linker to accept
this, the symbol declarations describing the kallsyms metadata are
emitted as having weak linkage, so they can remain unsatisfied. During
the subsequent passes, the weak references are satisfied by the kallsyms
metadata that was constructed based on information gathered from the
preceding passes.
Weak references lead to somewhat worse codegen, because taking their
address may need to produce NULL (if the reference was unsatisfied), and
this is not usually supported by RIP or PC relative symbol references.
Given that these references are ultimately always satisfied in the final
link, let's drop the weak annotation, and instead, provide fallback
definitions in the linker script that are only emitted if an unsatisfied
reference exists.
While at it, drop the FRV specific annotation that these symbols reside
in .rodata - FRV is long gone.
Tested-by: Nick Desaulniers <ndesaulniers@google.com> # Boot
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20230504174320.3930345-1-ardb%40kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/package/buildtar checks some kernel packages, and copies the
first image found. This may potentially produce an inconsistent (and
possibly wrong) package.
For instance, the for-loop for arm64 checks Image.{bz2,gz,lz4,lzma,lzo},
and vmlinuz.efi, then copies the first image found, which might be a
stale image created in a previous build.
When CONFIG_EFI_ZBOOT is enabled in the pristine source tree,
'make ARCH=arm64 tar-pkg' will build and copy vmlinuz.efi. This is the
expected behavior.
If you build the kernel with CONFIG_EFI_ZBOOT disabled, Image.gz will
be created, which will remain in the tree until you run 'make clean'.
Even if CONFIG_EFI_ZBOOT is turned on later, 'make ARCH=arm64 tar-pkg'
will copy stale Image.gz instead of the latest vmlinuz.efi, as Image.gz
takes precedence over vmlinuz.efi.
In summary, the code "[ -f ... ] && cp" does not consistently produce
the desired outcome.
Other packaging targets are deterministic; deb-pkg and rpm-pkg copies
${KBUILD_IMAGE}, which is determined by CONFIG options.
I removed [ -f ... ] checks from x86, alpha, parisc, and the default
because they have a single kernel image to copy. If it is missing, it
should be an error.
I did not modify the code for mips, arm64, riscv. Instead, I left some
comments. Eventually, someone may fix the code, or at the very least,
it may discourage the copy-pasting of incorrect code to another
architecture.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Running dtbs_check and dt_compatible_check targets really only depend
on processed-schema.json, but the dependency is 'dt_binding_check'. That
was sort worked around with the CHECK_DT_BINDING variable in order to
skip some of the work that 'dt_binding_check' does. It still runs the
full checks of the schemas which is not necessary and adds 10s of
seconds to the build time. That's significant when checking only a few
DTBs and with recent changes that have improved the validation time by
6-7x.
Add a new target, dt_binding_schema, which just builds
processed-schema.json and can be used as the dependency for other
targets. The scripts_dtc dependency isn't needed either as the examples
aren't built for it.
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add IEEE80211_RADIOTAP_EHT and IEEE80211_RADIOTAP_EHT_USIG radiotap
to fill in EHT information, such as MCS, NSS, GI and bandwidth.
Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce wifi LED switch control, add flow to Control a wifi
gpio pin based on the status of WIFI radio, if the pin is connected
to an LED, the LED will indicate the status of the WiFi radio.
Signed-off-by: Hao Zhang <hao.zhang@mediatek.com>
Co-developed-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The firmware support for management frame protection has limitations:
- do not support cipher BIP-GMAC-128 and BIP-GMAC-256
- support cipher BIP-CMAC-128 and BIP-CMAC-256, except action frame with
action type 'not robust'.
Therefore, to simplify the logic, do not set the IGTK to firmware and
let the encryption of management frames be handled by upper layer.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The implementation amounts to setting the driver flag
IEEE80211_VIF_SUPPORTS_CQM_RSSI, and then providing
mechanisms for continuously updating enough information
to be able to provide notifications to userspace when
RSSI drops below a certain threshold
Signed-off-by: Rong Yan <rong.yan@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This is expected by the firmware of older chipsets as well, though it may
not have been as strongly required as on mt799x
Fixes: 098428c400 ("wifi: mt76: connac: set correct muar_idx for mt799x chipsets")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Check if background radar is enabled or not before manually triggering it,
and also add more checks in radar detected event.
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For mt7992 chipsets, critical packet mode should be properly configured
to let the HW SDO module correctly fill the AC queue in TX descriptors of
some higher priority packets such as ARP and ICMP.
Without this patch, HW queues may hang when running MU traffic.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Without this commit, reading chip temperature will cause memory leakage.
Fixes: 6879b2e941 ("wifi: mt76: mt7996: add thermal sensor device support")
Reported-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Do not add UNI_BSS_INFO_11V_MBSSID tag when bssid_indicator is not set
to avoid abnormal beaconing behavior in non-11v MBSS scenario.
Signed-off-by: Henry Yen <henry.yen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For mt7996 chipsets, the HW CSO module can help to identify TCP traffic,
which assists the firmware in adjusting algorithms to improve overall
performance.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set RCPI values in mt7996_mcu_sta_rate_ctrl_tlv(), which can make the
FW rate control algorithm be initialized with a better MCS selection
table.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set peer address and aid for the BMC wtbl of station interface. For some
functions such as parsing MU_EDCA parameters from beacon, firmware will
need the peer address to do correct parsing.
Without this patch, MU uplink traffic would get suffered.
Reported-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When a BMC wtbl of station interface is correctly set with peer address,
HW will do rx header translation for broadcast data packets, which makes
mac80211 unable to find the corresponding ieee80211_sta and drop the
packets. To fix this, disable HW rx header translation for BMC entry.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Looks like this was missed in the initial patch that made
the conversion to the emulated chanctx drivers.
Fixes: 0a44dfc070 ("wifi: mac80211: simplify non-chanctx drivers")
Tested-by: James Courtier-Dutton <james.dutton@gmail.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Even if it is not a real issue at the moment since concurrent access to
mcu message queue is protected by mcu mutex, make the code more robust
and move mcu queue free space check inside queue spinlock critical section.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set intr1 to 0 in mt7996_irq_tasklet() in order to avoid possible
uninitialized variable usage if wed is not active for hif2.
Fixes: 83eafc9251 ("wifi: mt76: mt7996: add wed tx support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Before sending suspend & wow command to FW, its length should be
4-bytes alignd.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
During chip recovery (e.g. chip reset), there is a possible situation that
kernel worker reset_work is holding the lock and waiting for kernel thread
stat_worker to be parked, while stat_worker is waiting for the release of
the same lock.
It causes a deadlock resulting in the dumping of hung tasks messages and
possible rebooting of the device.
This patch prevents the execution of stat_worker during the chip recovery.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <MingYen.Hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7920e is a mt7921 series chipset with 802.11ax 2x2:2SS support.
The major difference is in firmware side only, at this moment.
This patch would add some mandatory changes for new chip id and
firmware download control.
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fixes issues with scanning and low power output at some rates.
Fixes: f75e4779d2 ("wifi: mt76: mt7996: add txpower setting support")
Signed-off-by: Chad Monroe <chad@monroe.io>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The wcid can be NULL. It should be checked for validity before
dereferencing it to avoid crash.
Fixes: 098428c400 ("wifi: mt76: connac: set correct muar_idx for mt799x chipsets")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This flag is needed for the PSE client reset. Fixes watchdog reset issues.
Fixes: c677dda165 ("wifi: mt76: mt7603: improve watchdog reset reliablity")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use the correct WMM AC queue instead of the MGMT one to fix potential issues
with aggregation sequence number tracking. Drop non-bufferable packets.
Fixes: fca9615f1a ("mt76: mt7603: fix up hardware queue index for PS filtered packets")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When pre-calibration data is missing, do not fail the driver probe.
Instead, just print a warning and fall back to regular calibration.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add pre-calibration for mt7986 and mt7916. It has different data size
with mt7915. Group cal needs 54k and 94k for 2G + 5G and 2G + 6G,
respectively. DPD cal needs 300k.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Send an update to the MCU whenever the settings change
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set correct beamformer capabilities for station vif in HE PHY
capabilities IE.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Do not report measurements if the airtime counter was cleared since the
last update (possibly by firmware)
Signed-off-by: Henry Yen <henry.yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The mcu command format are different for mt7915 and mt7986.
Fix the mt7915_mcu_wed_wa_tx_stats to support mt7915 and mt7986.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When queueing packets, only the MT76_RESET flag of the primary PHY
is checked. If the primary PHY is scanning or changing channels, this can
lead to packet loss for tx on the second PHY.
Fix this by passing the phy to the .tx_queue_skb op and using it to check
the correct flag.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Merge AMD P-state driver changes from Perry Yuan for v6.10:
"- Enable CPPC v2 for certain processors in the family 17H, as requested
by TR40 processor users who expect improved performance and lower
system temperature.
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing.
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have CPPC
v2 capability."
* amd-pstate:
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
cpufreq: amd-pstate: Remove amd_get_{min,max,nominal,lowest_nonlinear}_freq()
cpufreq: amd-pstate: Unify computation of {max,min,nominal,lowest_nonlinear}_freq
cpufreq: amd-pstate: Document the units for freq variables in amd_cpudata
cpufreq: amd-pstate: Document *_limit_* fields in struct amd_cpudata
dereference in the lmh driver in case the SCM is not present (Konrad
Dybcio)
- Use the strreplace() function instead of doing it manually in the
Armada driver (Rasmus Villemoes)
- Convert st,stih407-thermal to DT schema and fix up missing
properties (Raphael Gallais-Pou)
- Add suspend/resume by restoring the context of the tsens sensor
(Priyansh Jain)
- Support A1 SoC family Thermal Sensor controller and add the DT
bindings (Dmitry Rokosov)
- Improve the temperature approximation calculation and consolidate
the Tj constant into a shared area of the structure instead of
duplicating it on the Rcar Gen3 (Niklas Söderlund)
- Fix the Mediatek LVTS sensor coefficient for the MT8192 in order to support
it correctly (Hsin-Te Yuan)
- Fix a null pointer dereference on the tsens driver when the function
compute_intercept_slope() is called with a null parameter (Aleksandr
Mishin)
- Remove some unused fields in struct qpnp_tm_chip and k3_bandgap
(Christophe Jaillet)
- Fixup calibration efuse data decoding, consolidate the code by
checking boundaries and refactor some part of the LVTS Mediatek
driver. After setting the scene, add MT8186 and MT8188 along with
the DT bindings (Nicolas Pitre)
- Add Loongson-2K2000 support after some minor code adjustements and
providing the DT bindings definition (Binbin Zhou)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmYzYJQACgkQqDIjiipP
6E+siAgAjU4QO9x+akio7f2WeDbCUe5mCmVEcVxeoVumRw119I1PThRqN0fiZ2H9
qjSy8/dDuXMYRMK2NBE51wPq8I7bD3SDUiPSqaL6eNyKJYMSr6ZcuJgBWNEYgwSv
laeldN4h83+DGfp+UcZWfEEr8tnGv5SGCQ5htGFB3QOiQLBaUqdkObzrGvROeT92
pZMX18+ryKr/5k/e9DkOPwPObcfLkzb8w1m8UOZeRwjt+fyFKdZbdp9s7GTtPiZc
ULrhCwigYPWLD4GhS6My3V80eZyNNtO/UuEojKQyOpY/gKifHtKQViGv7DhPbDQA
3goodE7tTiQjeEYPg7Dx2p/twsBAPA==
=nDt+
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.10-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal
Merge updates of thermal drivers for v6.10 from Daniel Lezcano:
"- Add QCM2290 compatible DT bindings for Lmh and fix a null pointer
dereference in the lmh driver in case the SCM is not present (Konrad
Dybcio)
- Use the strreplace() function instead of doing it manually in the
Armada driver (Rasmus Villemoes)
- Convert st,stih407-thermal to DT schema and fix up missing
properties (Raphael Gallais-Pou)
- Add suspend/resume by restoring the context of the tsens sensor
(Priyansh Jain)
- Support A1 SoC family Thermal Sensor controller and add the DT
bindings (Dmitry Rokosov)
- Improve the temperature approximation calculation and consolidate
the Tj constant into a shared area of the structure instead of
duplicating it on the Rcar Gen3 (Niklas Söderlund)
- Fix the Mediatek LVTS sensor coefficient for the MT8192 in order to support
it correctly (Hsin-Te Yuan)
- Fix a null pointer dereference on the tsens driver when the function
compute_intercept_slope() is called with a null parameter (Aleksandr
Mishin)
- Remove some unused fields in struct qpnp_tm_chip and k3_bandgap
(Christophe Jaillet)
- Fixup calibration efuse data decoding, consolidate the code by
checking boundaries and refactor some part of the LVTS Mediatek
driver. After setting the scene, add MT8186 and MT8188 along with
the DT bindings (Nicolas Pitre)
- Add Loongson-2K2000 support after some minor code adjustements and
providing the DT bindings definition (Binbin Zhou)"
* tag 'thermal-v6.10-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (28 commits)
thermal/drivers/loongson2: Add Loongson-2K2000 support
dt-bindings: thermal: loongson,ls2k-thermal: Fix incorrect compatible definition
dt-bindings: thermal: loongson,ls2k-thermal: Add Loongson-2K0500 compatible
thermal/drivers/loongson2: Trivial code style adjustment
thermal/drivers/mediatek/lvts_thermal: Add MT8188 support
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8188
thermal/drivers/mediatek/lvts_thermal: Allow early empty sensor slots
thermal/drivers/mediatek/lvts_thermal: Provision for gt variable location
thermal/drivers/mediatek/lvts_thermal: Add MT8186 support
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8186
thermal/drivers/mediatek/lvts_thermal: Guard against efuse data buffer overflow
thermal/drivers/mediatek/lvts_thermal: Use offsets for every calibration byte
thermal/drivers/mediatek/lvts_thermal: Remove .hw_tshut_temp
thermal/drivers/mediatek/lvts_thermal: Move comment
thermal/drivers/mediatek/lvts_thermal: Retrieve all calibration bytes
thermal/drivers/k3_bandgap: Remove some unused fields in struct k3_bandgap
thermal/drivers/qcom: Remove some unused fields in struct qpnp_tm_chip
thermal/drivers/tsens: Fix null pointer dereference
thermal/drivers/mediatek/lvts_thermal: Add coeff for mt8192
thermal/drivers/rcar_gen3: Update temperature approximation calculation
...
Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the PCI device.
Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240412161057.14099-31-Jonathan.Cameron@huawei.com
To allow for assigning a suitable parent to the struct pmu device
update the documentation to describe the device via the event_source
bus where it will remain accessible.
For the ABI documention file also rename the file as it is named
after the path.
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240412161057.14099-30-Jonathan.Cameron@huawei.com
Modify the code so it can be compiled tested in configurations that do
not have ACPI enabled.
It fixes the following errors:
drivers/media/pci/intel/ipu-bridge.c:103:30: error: implicit declaration of function ‘acpi_device_handle’; did you mean ‘acpi_fwnode_handle’? [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:103:30: warning: initialization of ‘acpi_handle’ {aka ‘void *’} from ‘int’ makes pointer from integer without a cast [-Wint-conversion]
drivers/media/pci/intel/ipu-bridge.c:110:17: error: implicit declaration of function ‘for_each_acpi_dev_match’ [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:110:74: error: expected ‘;’ before ‘for_each_acpi_consumer_dev’
drivers/media/pci/intel/ipu-bridge.c:104:29: warning: unused variable ‘consumer’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:103:21: warning: unused variable ‘handle’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:166:38: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:185:43: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:191:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:196:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:202:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:223:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:236:18: error: implicit declaration of function ‘acpi_get_physical_device_location’ [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:236:56: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:238:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:256:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:275:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:280:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:469:26: error: implicit declaration of function ‘acpi_device_hid’; did you mean ‘dmi_device_id’? [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:468:74: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘int’ [-Wformat=]
drivers/media/pci/intel/ipu-bridge.c:637:58: error: expected ‘;’ before ‘{’ token
drivers/media/pci/intel/ipu-bridge.c:696:1: warning: label ‘err_put_adev’ defined but not used [-Wunused-label]
drivers/media/pci/intel/ipu-bridge.c:693:1: warning: label ‘err_put_ivsc’ defined but not used [-Wunused-label]
drivers/media/pci/intel/ipu-bridge.c:691:1: warning: label ‘err_free_swnodes’ defined but not used [-Wunused-label]
drivers/media/pci/intel/ipu-bridge.c:632:40: warning: unused variable ‘primary’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:632:31: warning: unused variable ‘fwnode’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:733:73: error: expected ‘;’ before ‘{’ token
drivers/media/pci/intel/ipu-bridge.c:725:24: warning: unused variable ‘csi_dev’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:724:43: warning: unused variable ‘adev’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:599:12: warning: ‘ipu_bridge_instantiate_ivsc’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu-bridge.c:444:13: warning: ‘ipu_bridge_create_connection_swnodes’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu-bridge.c:297:13: warning: ‘ipu_bridge_create_fwnode_properties’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu-bridge.c:155:12: warning: ‘ipu_bridge_check_ivsc_dev’ defined but not used [-Wunused-function]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Currently, when using WCN7850 or QCN9274 as AP, ath12k always performs down
grade phy mode operation regardless of whether the firmware supports EHT
capability or not and then vdev will start in HE mode. When stations that
support EHT capability try to connect to the AP, the AP will set phy mode
to EHT after receiving the association request packet, and then send
WMI_PEER_ASSOC_CMDID command to firmware, AP’s firmware will crash.
This is because when the ath12k_mac_copy_sband_iftype_data() function
handles EHT capability, it does not copy the EHT capability into the
iftype[band][type] array according to the interface type. So, interface
type should not be used as an index to get eht_cap in
ath12k_mac_check_down_grade_phy_mode() function.
To address this issue, use types_mask to select the eht_cap in
ath12k_mac_check_down_grade_phy_mode() function.
This patch affects QCN9274 and WCN7850 because they have the same issue.
Hostapd log:
wlo1: STA 02:03:7f:37:12:34 IEEE 802.11: Could not set STA to kernel driver
Kernel log:
[270894.816076] ath12k_pci 0000:03:00.0: failed to send WMI_PEER_SET_PARAM cmd
[270894.816111] ath12k_pci 0000:03:00.0: failed to setup peer SMPS for vdev 0: -108
[270894.816122] ath12k_pci 0000:03:00.0: Failed to associate station: 02:03:7f:37:12:34
[270894.843389] ieee80211 phy5: Hardware restart was requested
[270894.843517] ath12k_pci 0000:03:00.0: failed to lookup peer 02:03:7f:37:12:34 on vdev 0
[270894.843616] ath12k_pci 0000:03:00.0: failed to send WMI_PEER_DELETE cmd
[270894.843650] ath12k_pci 0000:03:00.0: failed to delete peer vdev_id 0 addr 02:03:7f:37:12:34 ret -108
[270894.843663] ath12k_pci 0000:03:00.0: Failed to delete peer: 02:03:7f:37:12:34 for VDEV: 0
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240425083837.5340-1-quic_lingbok@quicinc.com