Add support for the Bananapi R2 (BPI-R2) development board from
BIPAI KEJI. Detailed hardware information for BPI-R2 which could be
found on http://www.banana-pi.org/r2.html
The patch added nodes into the SoC-level file mt7623.dtsi such as CPU OPP
table and thermal zone treating CPU as one of cooling devices and also
added nodes into board-level file mt7623n-bananapi-bpi-r2.dts such as
MediaTek GMAC, MT7530 Switch, the crypto engine, USB, IR, I2S, I2C, UART,
SPI, PWM, GPIO keys, GPIO LEDs and PMIC LEDs. As to the other missing
hardware and peripherals, they would be added and integrated continuously.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable the nand device and setup pinmux on the mt7632m rfb with nand
support.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
All versions of the mt7623n RFB have an USB port so enable the device.
There is a gpio that gets used to power up the port supply. Add support
for this gpio using the fixed-regulator driver.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This patch does a cleanup of the uart nodes in the dts file of the RFB. It
adds aliases, enables 2 more uarts and explicitly sets the uart mode of the
console.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
There are 2 versions of the MT7623 SoC, the one is MT7623N and the other
is MT7623A. MT7623N is almost identical to MT7623A but has some
additional multimedia features. The reference boards are available as
NAND or MMC and might have a different ethernet setup. In order to reduce
the duplication of devicetree code we add an intermediate dtsi file for
these reference boards. Additionally MediaTek pointed out, that the EVB
is yet another board and the board in question is infact the RFB. Take
this into account while renaming the files.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MediaTek produces various PMICs. Which one is used depends on the actual
circuit design. Instead of adding the correct PMIC node to every dts file
we instead add a new intermediate dtsi file which adds the PMIC node. For
those boards with the same PMIC, the intermediate mt6323.dtsi could be
reused to save more redundant nodes created on each board device-tree
files.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This adds DT binding documentation for Mediatek MT7623a
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Because there are two versions of MT7623 SoC that is MT7623a and MT7623n
respectively. So update the part of MT7623n bindings to allow that people
tend to differentiate which MT7623 SoC the boards applies.
And "mediatek,mt7623-evb" can be safely changed to
"mediatek,mt7623n-rfb-nand" because mt7623-evb is a kind of debug board
internally in Mediatek which real users can't get. So instead we should
indicate which variants it belongs to with more specific postfix as the
adding here to let people easily know what board they use.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
On one of my test machines nhi_mailbox_cmd() called from icm_suspend()
times out and returnes an error which then is propagated to the
caller and causes the entire system suspend to be aborted which isn't
very useful.
Instead of aborting system suspend, print the error into the log
and continue.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Michael Jamet <michael.jamet@intel.com>
This patch replaces an rwlock and raw notifier by an atomic notifier
protected by a spin_lock and RCU.
The main reason for this change is due to a 'scheduling while atomic'
bug with RT kernels on ARM/ARM64. On ARM/ARM64, the rwlock
cpu_pm_notifier_lock in cpu_pm_enter/exit() causes a potential
schedule after IRQ disable in the idle call chain:
cpu_startup_entry
cpu_idle_loop
local_irq_disable()
cpuidle_idle_call
call_cpuidle
cpuidle_enter
cpuidle_enter_state
->enter :arm_enter_idle_state
cpu_pm_enter/exit
CPU_PM_CPU_IDLE_ENTER
read_lock(&cpu_pm_notifier_lock); <-- sleep in idle
__rt_spin_lock();
schedule();
The kernel panic is here:
[ 4.609601] BUG: scheduling while atomic: swapper/1/0/0x00000002
[ 4.609608] [<ffff0000086fae70>] arm_enter_idle_state+0x18/0x70
[ 4.609614] Modules linked in:
[ 4.609615] [<ffff0000086f9298>] cpuidle_enter_state+0xf0/0x218
[ 4.609620] [<ffff0000086f93f8>] cpuidle_enter+0x18/0x20
[ 4.609626] Preemption disabled at:
[ 4.609627] [<ffff0000080fa234>] call_cpuidle+0x24/0x40
[ 4.609635] [<ffff000008882fa4>] schedule_preempt_disabled+0x1c/0x28
[ 4.609639] [<ffff0000080fa49c>] cpu_startup_entry+0x154/0x1f8
[ 4.609645] [<ffff00000808e004>] secondary_start_kernel+0x15c/0x1a0
Daniel Lezcano said this notification is needed on arm/arm64 platforms.
Sebastian suggested using atomic_notifier instead of rwlock, which is not
only removing the sleeping in idle, but also improving latency.
Tony Lindgren found a miss use that rcu_read_lock used after rcu_idle_enter
Paul McKenney suggested trying RCU_NONIDLE.
Signed-off-by: Alex Shi <alex.shi@linaro.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
X-Gene platforms describe multiple GHES error sources with the same
hardware error notification type (external interrupt) and interrupt
number.
Change the GHES interrupt request to support sharing the same IRQ.
This change includs contributions from Tuan Phan <tphan@apm.com>.
Signed-off-by: Loc Ho <lho@apm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Force alignment value to the default one (1 byte) if uninitialized.
This fixes hci_ll serdev driver (alignment = 0) and avoid any further
issues with upcoming drivers.
Signed-off-by: Loic Poulain <loic.poulain@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The watchdog soft-NMI exception stack setup loads a stack pointer
twice, which is an obvious error. It ends up using the system reset
interrupt (true-NMI) stack, which is also a bug because the watchdog
could be preempted by a system reset interrupt that overwrites the
NMI stack.
Change the soft-NMI to use the "emergency stack". The current kernel
stack is not used, because of the longer-term goal to prevent
asynchronous stack access using soft-disable.
Fixes: 2104180a53 ("powerpc/64s: implement arch-specific hardlockup watchdog")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZapWhAAoJEHm+PkMAQRiGKb0IAJM6b7SbWaw69Og7+qiFB+zZ
xp29iXqbE9fPISC6a5BRQV1ONjeDM6opGixGHqGC8Hla6k2IYz25VDNoF8wd0MXN
cz/Ih20vd3C5afxXGe5cTT8lsPAlV0mWXxForlu6j8jPeL62FPfq6RhEkw7AcrYL
yfYy3k3qSdOrrvBdII0WAAUi46UfIs+we9BQgbsMbkHOiqV2K0MOrzKE84Xbgepq
RAy2xg6P4b4+hTx8xTrYc1MXwpnqjRc0oJ08gdmiwW3AOOU7LxYFn7zDkLPWi9Rr
g4x6r4YhBTGxT4wNvovLIiqd9QFs//dMCuPWYwEtTICG48umIqqq24beQ0mvCdg=
=08Ic
-----END PGP SIGNATURE-----
Merge tag 'v4.13-rc1' into fixes
The fixes branch is based off a random pre-rc1 commit, because we had
some fixes that needed to go in before rc1 was released.
However we now need to fix some code that went in after that point, but
before rc1, so merge rc1 to get that code into fixes so we can fix it!
The for_each_child_of_node macro itself maintains the correct reference
count of the nodes so the explicit of_node_put() call causes a warning:
[ 0.098960] OF: ERROR: Bad of_node_put() on /pmc@7000e400/powergates/xusba
[ 0.098981] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.3 #1-NixOS
[ 0.098996] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT)
[ 0.099011] Call trace:
[ 0.099034] [<ffff00000808a048>] dump_backtrace+0x0/0x2a0
[ 0.099051] [<ffff00000808a30c>] show_stack+0x24/0x30
[ 0.099069] [<ffff0000084a6494>] dump_stack+0x9c/0xc0
[ 0.099090] [<ffff000008992214>] of_node_release+0xa4/0xa8
[ 0.099107] [<ffff0000084a9270>] kobject_put+0x90/0x1f8
[ 0.099124] [<ffff0000089914ac>] of_node_put+0x24/0x30
[ 0.099140] [<ffff00000898cec4>] __of_get_next_child+0x4c/0x70
[ 0.099155] [<ffff00000898cf28>] of_get_next_child+0x40/0x68
[ 0.099173] [<ffff0000090a099c>] tegra_pmc_early_init+0x4e8/0x5ac
[ 0.099189] [<ffff00000808399c>] do_one_initcall+0x5c/0x168
[ 0.099206] [<ffff000009050c98>] kernel_init_freeable+0xd4/0x240
[ 0.099224] [<ffff000008b2d658>] kernel_init+0x18/0x108
[ 0.099238] [<ffff0000080836c0>] ret_from_fork+0x10/0x50
(It's not very apparent from the OF documentation that of_node_put() is
not needed; the macro itself has no docstring and of_get_next_child()
used in the implementation begins with "Returns a node pointer with
refcount incremented" but then only at the very end of the docstring
the crucial part "Decrements the refcount of prev" is mentioned.)
Fixes: a38045121b ("soc/tegra: pmc: Add generic PM domain support")
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch fixes an issue in the translation table code potentially
leading to a TT Request + Response storm. The issue may occur for nodes
involving BLA and an inconsistent configuration of the batman-adv AP
isolation feature. However, since the new multicast optimizations, a
single, malformed packet may lead to a mesh-wide, persistent
Denial-of-Service, too.
The issue occurs because nodes are currently OR-ing the TT sync flags of
all originators announcing a specific MAC address via the
translation table. When an intermediate node now receives a TT Request
and wants to answer this on behalf of the destination node, then this
intermediate node now responds with an altered flag field and broken
CRC. The next OGM of the real destination will lead to a CRC mismatch
and triggering a TT Request and Response again.
Furthermore, the OR-ing is currently never undone as long as at least
one originator announcing the according MAC address remains, leading to
the potential persistency of this issue.
This patch fixes this issue by storing the flags used in the CRC
calculation on a a per TT orig entry basis to be able to respond with
the correct, original flags in an intermediate TT Response for one
thing. And to be able to correctly unset sync flags once all nodes
announcing a sync flag vanish for another.
Fixes: e9c00136a4 ("batman-adv: fix tt_global_entries flags update")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Antonio Quartulli <a@unstable.cc>
[sw: typo in commit message]
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
The Amlogic Meson8/Meson8b/Meson8m2 clock controller provides some reset
lines. These are used for example to boot the secondary CPU cores.
This patch describes the reset controller which is embedded into the
clock controller on these SoCs.
A header file is provided which provides preprocessor macros for each
reset line (to make the .dts files easier to read).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The offset of hugepage block will not be 16G, if the expected
page is more than one. Calculate the totol size instead of the
hardcode value.
Fixes: 4792adbac9 ("powerpc: Don't use a 16G page if beyond mem= limits")
Signed-off-by: Rui Teng <rui.teng@linux.vnet.ibm.com>
Tested-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For debugging very early boot problems we have CONFIG_PPC_EARLY_DEBUG,
which allows configuring the kernel such that it unconditionally writes
to a particular type of console, regardless of whether that console
exists or not. This is useful sometimes when the kernel crashes before
it can even determine what platform it's on, and therefore what consoles
exist.
However if you boot a kernel built this way on a different platform, it
will generally crash because it writes to a console that doesn't exist.
A particularly nasty instance of this is if you enable the hypervisor
console early debug, and then boot that kernel on bare metal. The result
is that the kernel calls "the hypervisor" very early in boot, but the
kernel *is* the hypervisor, so we jump to the system call handler and
start executing all sorts of code that isn't ready to be run. This may
lead to a machine check or check stop depending on how lucky you are.
Luckily there is an easy way to avoid this particular case. We simply
read the MSR before installing the hooks, and if we see MSR_HV is set
then we are the hypervisor and we definitely should not use the
hypervisor console.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Although pretty much everyone using powernv is running little endian,
we should still test we can build for big endian. So add a
powernv_be_defconfig, which is autogenerated by flipping the endian
symbol in powernv_defconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Since kernel 4.11 the thread and irq stacks on parisc randomly overflow
the default size of 16k. The reason why stack usage suddenly grew is yet
unknown.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Helge Deller <deller@gmx.de>
In testing James' patch to drivers/parisc/pdc_stable.c, I hit the BUG
statement in flush_cache_range() during a system shutdown:
kernel BUG at arch/parisc/kernel/cache.c:595!
CPU: 2 PID: 6532 Comm: kworker/2:0 Not tainted 4.13.0-rc2+ #1
Workqueue: events free_ioctx
IAOQ[0]: flush_cache_range+0x144/0x148
IAOQ[1]: flush_cache_page+0x0/0x1a8
RP(r2): flush_cache_range+0xec/0x148
Backtrace:
[<00000000402910ac>] unmap_page_range+0x84/0x880
[<00000000402918f4>] unmap_single_vma+0x4c/0x60
[<0000000040291a18>] zap_page_range_single+0x110/0x160
[<0000000040291c34>] unmap_mapping_range+0x174/0x1a8
[<000000004026ccd8>] truncate_pagecache+0x50/0xa8
[<000000004026cd84>] truncate_setsize+0x54/0x70
[<000000004033d534>] put_aio_ring_file+0x44/0xb0
[<000000004033d5d8>] aio_free_ring+0x38/0x140
[<000000004033d714>] free_ioctx+0x34/0xa8
[<00000000401b0028>] process_one_work+0x1b8/0x4d0
[<00000000401b04f4>] worker_thread+0x1b4/0x648
[<00000000401b9128>] kthread+0x1b0/0x208
[<0000000040150020>] end_fault_vector+0x20/0x28
[<0000000040639518>] nf_ip_reroute+0x50/0xa8
[<0000000040638ed0>] nf_ip_route+0x10/0x78
[<0000000040638c90>] xfrm4_mode_tunnel_input+0x180/0x1f8
CPU: 2 PID: 6532 Comm: kworker/2:0 Not tainted 4.13.0-rc2+ #1
Workqueue: events free_ioctx
Backtrace:
[<0000000040163bf0>] show_stack+0x20/0x38
[<0000000040688480>] dump_stack+0xa8/0x120
[<0000000040163dc4>] die_if_kernel+0x19c/0x2b0
[<0000000040164d0c>] handle_interruption+0xa24/0xa48
This patch modifies flush_cache_range() to handle non current contexts.
In as much as this occurs infrequently, the simplest approach is to
flush the entire cache when this happens.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.9+
Signed-off-by: Helge Deller <deller@gmx.de>
For some odd reason, it forces a byte-by-byte copy of each field. A
plain old swap() on most of these fields would be more efficient. We
do need to retain the memswap of i_data however as that field is an array.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
For Lustre, if ea_inode fails in hash validation but passes parent
inode and generation checks, it won't be added to the cache as well
as the error "-EFSCORRUPTED" should be cleared, otherwise it will
cause "Structure needs cleaning" when running getfattr command.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-9723
Cc: stable@vger.kernel.org
Fixes: dec214d00e
Signed-off-by: Emoly Liu <emoly.liu@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: tahsin@google.com
A CMA memory pool reserved memory node is added, and is attached to
the DSP node through the 'memory-region' property on the K2E EVM board.
This area will be used for allocating virtio rings and buffers. This
node allows the DSP Memory Protection and Address Extension (MPAX)
module to be configured properly for the DSP processor, and matches
the values used on the other Keystone 2 boards for software
compatibility.
The reserved memory node and the user DSP node are also marked okay
to enable the DSP on the 66AK2E EVM board.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
A common CMA memory pool reserved memory node is added, and is attached
to all the DSP nodes through the 'memory-region' property on the 66AK2L
EVM board. This area will be used for allocating virtio rings and buffers.
The common node allows the DSP Memory Protection and Address Extension
(MPAX) module to be configured uniformly across all the DSP processors.
The reserved memory node and all the user DSP nodes are also marked okay
to enable the DSPs on the 66AK2L EVM board.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
A common CMA memory pool reserved memory node is added, and is attached
to all the DSP nodes through the 'memory-region' property on the 66AK2H
EVM board. This area will be used for allocating virtio rings and buffers.
The common node allows the DSP Memory Protection and Address Extension
(MPAX) module to be configured uniformly across all the DSP processors.
The reserved memory node and all the user DSP nodes are also marked okay
to enable the DSPs on the 66AK2K EVM board.
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The Keystone 2 66AK2E SoC has one TMS320C66x DSP Core Subsystem
(C66x CorePac), with a 1.4 GHz C66x Fixed or Floating-Point DSP
Core, and 32 KB of L1P & L1D SRAMs and a 1 MB L2 SRAM. Add the
DT node for this DSP processor sub-system. The processor does
not have a MMU, and uses various IPC Generation registers and
shared memory for inter-processor communication. The alias with
a stem 'rproc' has also been added for the DSP, it provides a
fixed remoteproc id for the DSP processor.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The Keystone 2 66AK2L SoCs have 4 TMS320C66x DSP Core Subsystems
(C66x CorePacs), each with a 1.0 GHz or 1.2 GHz C66x Fixed /
Floating-Point DSP Core, and 32 KB of L1P & L1D SRAMs and a 1 MB
L2 SRAM. Add the DT nodes for these DSP processor sub-systems.
The processors do not have an MMU, and use various IPC Generation
registers and shared memory for inter-processor communication.
The aliases with a stem 'rproc' have also been added for all the
DSPs, they provide a fixed remoteproc id to each DSP processor.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The Keystone 2 66AK2H/66AK2K SoCs have upto 8 TMS320C66x DSP Core
Subsystems (C66x CorePacs), each with a 1.0 GHz or 1.2 GHz C66x
Fixed/Floating-Point DSP Core, and 32 KB of L1P & L1D SRAMs and a
1 MB L2 SRAM. Add the DT nodes for these DSP processor sub-systems.
The processors do not have an MMU, and use various IPC Generation
registers and shared memory for inter-processor communication.
The aliases with a stem 'rproc' have also been added for all the
DSPs, they provide a fixed remoteproc id to each DSP processor.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sam Nelson <sam.nelson@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit
set, DIR1 is expected to have SGID bit set (and owning group equal to
the owning group of 'DIR0'). However when 'DIR0' also has some default
ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on
'DIR1' to get cleared if user is not member of the owning group.
Fix the problem by moving posix_acl_update_mode() out of
__ext4_set_acl() into ext4_set_acl(). That way the function will not be
called when inheriting ACLs which is what we want as it prevents SGID
bit clearing and the mode has been properly set by posix_acl_create()
anyway.
Fixes: 073931017b
CC: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
When changing a file's acl mask, __ext4_set_acl() will first set the group
bits of i_mode to the value of the mask, and only then set the actual
extended attribute representing the new acl.
If the second part fails (due to lack of space, for example) and the file
had no acl attribute to begin with, the system will from now on assume
that the mask permission bits are actual group permission bits, potentially
granting access to the wrong users.
Prevent this by only changing the inode mode after the acl has been set.
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Two variables in ext4_inode_info, i_reserved_meta_blocks and
i_allocated_meta_blocks, are unused. Removing them saves a little
memory per in-memory inode and cleans up clutter in several tracepoints.
Adjust tracepoint output from ext4_alloc_da_blocks() for consistency
and fix a typo and whitespace near these changes.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Jamal Hadi Salim says:
====================
net sched actions: improve dump performance
Changes since v11:
------------------
1) Jiri - renames: nla_value to value and nla_selector to selector
2) Jiri - rename: validate_nla_bitfield_32 to validate_nla_bitfield_32
3) Jiri - rename: NLA_BITFIELD_32 to NLA_BITFIELD32
4) Jiri - remove unnecessary break when we return in case statement
5) Jiri - rename and move nla_get_bitfield_32 to an earlier patch
6) Jiri - xmas tree alignment of var declaration
7) Jiri - rename all declarations of bitfield 32 vars to be consistent ("bf")
8) Jiri - improve validate_nla_bitfield32() validation to disallow valid
bit values that are not selected by the selector
Changes since v10:
-----------------
1) Jiri: move type->validate_content() to its own patch
Jamal: decided to remove it altogether so we can get this patch set in.
2) Change name of NLA_FLAG_BITS to NLA_BITFIELD_32 based on discussions
with D. Ahern and Jiri. D. Ahern suggests to make this a variable bitmap size.
My analysis at this point is it too complex and i only need a few bit
flags. If we run out of bits someone else can create a new NLA_BITFIELD_XXX
and start using that. So please let this go.
3) Jamal - Add Suggested-by: Jiri for type NLA_BITFIELD_32
4) Jiri: Change name allowed_flags to tcaa_root_flags_allowed
5) Jiri: Introduce nla_get_flag_bits_values() helper instead of using
memcpy for retrieving nla_bitfield_32 fields.
Changes since v9:
-----------------
1) General consensus:
- remove again the use of BIT() to maintain uapi consistency ;->
1) Jiri:
- Add a new netlink type NLA_FLAG_BITS to check for valid bits
and use it instead of inline vetting (patch 4/4 now)
Changes since v8:
-----------------
1) Jiri:
- Add back the use of BIT(). Eventually fix iproute2 instead
- Rename VALID_TCA_FLAGS to VALID_TCA_ROOT_FLAGS
Changes since v7:
-----------------
Jamal:
No changes.
Patch 1 went out twice. Resend without two copies of patch 1
changes since v6:
-----------------
1) DaveM:
New rules for netlink messages. From now on we are going to start
checking for bits that are not used and rejecting anything we dont
understand. In the future this is going to require major changes
to user space code (tc etc). This is just a start.
To quote, David:
"
Again, bits you aren't using now, make sure userspace doesn't
set them. And if it does, reject.
"
Added checks for ensuring things work as above.
2) Jiri:
a)Fix the commit message to properly use "Fixes" description
b)Align assignments for nla_policy
Changes since v5:
----------------
0)
Remove use of BIT() because it is kernel specific. Requires a separate
patch (Jiri can submit that in his cleanups)
1)To paraphrase Eric D.
"memcpy(nla_data(count_attr), &cb->args[1], sizeof(u32));
wont work on 64bit BE machines because cb->args[1]
(which is 64 bit is larger in size than sizeof(u32))"
Fixed
2) Jiri Pirko
i) Spotted a bug fix mixed in the patch for wrong TLV
fix. Add patch 1/3 to address this. Make part of this
series because of dependencies.
ii) Rename ACT_LARGE_DUMP_ON -> TCA_FLAG_LARGE_DUMP_ON
iii) Satisfy Jiri's obsession against the noun "tcaa"
a)Rename struct nlattr *tcaa --> struct nlattr *tb
b)Rename TCAA_ACT_XXX -> TCA_ROOT_XXX
Changes since v4:
-----------------
1) Eric D.
pointed out that when all skb space is used up by the dump
there will be no space to insert the TCAA_ACT_COUNT attribute.
2) Jiri:
i) Change:
enum {
TCAA_UNSPEC,
TCAA_ACT_TAB,
TCAA_ACT_FLAGS,
TCAA_ACT_COUNT,
TCAA_ACT_TIME_FILTER,
__TCAA_MAX
};
to:
enum {
TCAA_UNSPEC,
TCAA_ACT_TAB,
TCAA_ACT_FLAGS,
TCAA_ACT_COUNT,
__TCAA_MAX,
};
Jiri plans to followup with the rest of the code to make the
style consistent.
ii) Rename attribute TCAA_ACT_TIME_FILTER --> TCAA_ACT_TIME_DELTA
iii) Rename variable jiffy_filter --> jiffy_since
iv) Rename msecs_filter --> msecs_since
v) get rid of unused cb->args[0] and rename cb->args[4] to cb->args[0]
Earlier Changes
----------------
- Jiri mostly on names of things.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for filtering based on time since last used.
When we are dumping a large number of actions it is useful to
have the option of filtering based on when the action was last
used to reduce the amount of data crossing to user space.
With this patch the user space app sets the TCA_ROOT_TIME_DELTA
attribute with the value in milliseconds with "time of interest
since now". The kernel converts this to jiffies and does the
filtering comparison matching entries that have seen activity
since then and returns them to user space.
Old kernels and old tc continue to work in legacy mode since
they dont specify this attribute.
Some example (we have 400 actions bound to 400 filters); at
installation time. Using updated when tc setting the time of
interest to 120 seconds earlier (we see 400 actions):
prompt$ hackedtc actions ls action gact since 120000| grep index | wc -l
400
go get some coffee and wait for > 120 seconds and try again:
prompt$ hackedtc actions ls action gact since 120000 | grep index | wc -l
0
Lets see a filter bound to one of these actions:
....
filter pref 10 u32
filter pref 10 u32 fh 800: ht divisor 1
filter pref 10 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10 (rule hit 2 success 1)
match 7f000002/ffffffff at 12 (success 1 )
action order 1: gact action pass
random type none pass val 0
index 23 ref 2 bind 1 installed 1145 sec used 802 sec
Action statistics:
Sent 84 bytes 1 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
....
that coffee took long, no? It was good.
Now lets ping -c 1 127.0.0.2, then run the actions again:
prompt$ hackedtc actions ls action gact since 120 | grep index | wc -l
1
More details please:
prompt$ hackedtc -s actions ls action gact since 120000
action order 0: gact action pass
random type none pass val 0
index 23 ref 2 bind 1 installed 1270 sec used 30 sec
Action statistics:
Sent 168 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
And the filter?
filter pref 10 u32
filter pref 10 u32 fh 800: ht divisor 1
filter pref 10 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10 (rule hit 4 success 2)
match 7f000002/ffffffff at 12 (success 2 )
action order 1: gact action pass
random type none pass val 0
index 23 ref 2 bind 1 installed 1324 sec used 84 sec
Action statistics:
Sent 168 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When you dump hundreds of thousands of actions, getting only 32 per
dump batch even when the socket buffer and memory allocations allow
is inefficient.
With this change, the user will get as many as possibly fitting
within the given constraints available to the kernel.
The top level action TLV space is extended. An attribute
TCA_ROOT_FLAGS is used to carry flags; flag TCA_FLAG_LARGE_DUMP_ON
is set by the user indicating the user is capable of processing
these large dumps. Older user space which doesnt set this flag
doesnt get the large (than 32) batches.
The kernel uses the TCA_ROOT_COUNT attribute to tell the user how many
actions are put in a single batch. As such user space app knows how long
to iterate (independent of the type of action being dumped)
instead of hardcoded maximum of 32 thus maintaining backward compat.
Some results dumping 1.5M actions below:
first an unpatched tc which doesnt understand these features...
prompt$ time -p tc actions ls action gact | grep index | wc -l
1500000
real 1388.43
user 2.07
sys 1386.79
Now lets see a patched tc which sets the correct flags when requesting
a dump:
prompt$ time -p updatedtc actions ls action gact | grep index | wc -l
1500000
real 178.13
user 2.02
sys 176.96
That is about 8x performance improvement for tc app which sets its
receive buffer to about 32K.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bug fix for an issue which has been around for about a decade.
We got away with it because the enumeration was larger than needed.
Fixes: 7ba699c604 ("[NET_SCHED]: Convert actions from rtnetlink to new netlink API")
Suggested-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Generic bitflags attribute content sent to the kernel by user.
With this netlink attr type the user can either set or unset a
flag in the kernel.
The value is a bitmap that defines the bit values being set
The selector is a bitmask that defines which value bit is to be
considered.
A check is made to ensure the rules that a kernel subsystem always
conforms to bitflags the kernel already knows about. i.e
if the user tries to set a bit flag that is not understood then
the _it will be rejected_.
In the most basic form, the user specifies the attribute policy as:
[ATTR_GOO] = { .type = NLA_BITFIELD32, .validation_data = &myvalidflags },
where myvalidflags is the bit mask of the flags the kernel understands.
If the user _does not_ provide myvalidflags then the attribute will
also be rejected.
Examples:
value = 0x0, and selector = 0x1
implies we are selecting bit 1 and we want to set its value to 0.
value = 0x2, and selector = 0x2
implies we are selecting bit 2 and we want to set its value to 1.
Suggested-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 914f82a32d "ext4: refactor direct IO code" deleted
ext4_ext_direct_IO(), but references to that function remain in
comments. Update them to refer to ext4_direct_IO_write().
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
The FEC Receive Control Register has a 14 bit field indicating the
longest frame that may be received. It is being set to 1522. Frames
longer than this are discarded, but counted as being in error.
When using DSA, frames from the switch has an additional header,
either 4 or 8 bytes if a Marvell switch is used. Thus a full MTU frame
of 1522 bytes received by the switch on a port becomes 1530 bytes when
passed to the host via the FEC interface.
Change the maximum receive size to 2048 - 64, where 64 is the maximum
rx_alignment applied on the receive buffer for AVB capable FEC
cores. Use this value also for the maximum receive buffer size. The
driver is already allocating a receive SKB of 2048 bytes, so this
change should not have any significant effects.
Tested on imx51, imx6, vf610.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the PHY is missing but expected, e.g. because of a typ0 in the dt
file, it is not possible to open the interface. ip link returns:
RTNETLINK answers: No such device
It is not very obvious what the problem is. Add a netdev_err() in this
case to make it easier to debug the issue.
[ 21.409385] fec 2188000.ethernet eth0: Unable to connect to phy
RTNETLINK answers: No such device
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Egil Hjelmeland says:
====================
net: dsa: lan9303: Fix MDIO issues.
This series fix the MDIO interface for the lan9303 DSA driver.
Bugs found after testing on actual HW.
This series is extracted from the first patch of my first large
series. Significant changes from that version are:
- use mdiobus_write_nested, mdiobus_read_nested.
- EXPORT lan9303_indirect_phy_ops
Unfortunately I do not have access to i2c based system for
testing.
Changes from first version:
- Change EXPORT_SYMBOL to EXPORT_SYMBOL_GPL
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Indirect access (PMI) to phy register only work in I2C mode. In
MDIO mode phy registers must be accessed directly. Introduced
struct lan9303_phy_ops to handle the two modes.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Preparing for the following fix of MDIO phy access:
Renamed functions that access PHY 1 and 2 indirectly through PMI
registers.
lan9303_port_phy_reg_wait_for_completion() to
lan9303_indirect_phy_wait_for_completion()
lan9303_port_phy_reg_read() to
lan9303_indirect_phy_read()
lan9303_port_phy_reg_write() to
lan9303_indirect_phy_write()
Also changed "val" parameter of lan9303_indirect_phy_write() to u16,
for clarity.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
lan9303_mdio_write()/_read() must multiply register number by 4 to get
offset.
Added some commments to the register definitions.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle that MDIO read with no response return 0xffff.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's a hardware bug, all window's overlay channel reset
value is same, hardware overlay would be die.
so we must initial difference id for each overlay channel.
The Channel register is supported on all vop will full design.
Following is the details for this register
VOP_WIN0_CTRL2
bit[7:4] win_rid_win0_cbr
axi read id of win0 cbr channel
bit[3:0] win_rid_win0_yrgb
axi read id of win0 yrgb channel
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1501049980-6239-1-git-send-email-mark.yao@rock-chips.com
