Commit graph

218,874 commits

Author SHA1 Message Date
Francois Romieu
bcf1f57fbf e1000e: remove open-coded skb_cow_head
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-11 05:58:08 -07:00
Francois Romieu
4a54b1e598 e1000: remove open-coded skb_cow_head
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-11 05:58:07 -07:00
Jakub Kicinski
7dc86605a2 e1000: remove debug messages with function names
e1000_hw.c contains a lot of debug messages which print
name of invoked function and contain no new line character
at the end.  Remove them as equivalent information can be
nowadays obtained using function tracer.

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-11 05:58:07 -07:00
Francois Romieu
8f12c03483 ixgbevf: remove open-coded skb_cow_head
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-11 05:58:06 -07:00
Mark Rustad
ea699569b1 ixgbevf: Add bit to mark work queue initialization
An indication of work queue initialization is needed. This is
because register accesses prior to that time can detect a removal
and attempt to schedule the watchdog task. Adding the
__IXGBEVF_WORK_INIT bit allows this to be checked and if not
set prevent the watchdog task scheduling. By checking for a
removal right after initialization, the probe can be failed
at that point without getting the watchdog task involved.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-11 05:58:06 -07:00
Francois Romieu
2049e1f6f5 ixgbe: remove open-coded skb_cow_head
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-11 05:58:06 -07:00
Mark Rustad
58cf663f0e ixgbe: Add bit to mark service task initialization
There needs to be an indication when the service task has been
initialized. This is because register access prior to that time
can detect a removal and attempt to schedule the service task.
Adding the __IXGBE_SERVICE_INITED bit allows this to be checked
and if not set prevent the service task scheduling. By checking
for a removal right after initialization, the probe can be failed
at that point without getting the service task involved.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-11 05:58:05 -07:00
Mugunthan V N
629c9a8fd0 drivers: net: cpsw: Add default vlan for dual emac case also
Dual EMAC works with VLAN segregation of the ports, so default vlan needs
to be added in dual EMAC case else default vlan will be tagged for all
egress packets and vlan unaware switches/servers will drop packets
from the EVM.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-09 14:55:37 -04:00
Balakumaran Kannan
fa8cddaf90 net phylib: Remove unnecessary condition check in phy
This condition check makes no difference in the code flow since 3.10

Signed-off-by: Balakumaran Kannan <kumaran.4353@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-09 13:03:53 -04:00
Linus Torvalds
ce7613db2d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull more networking updates from David Miller:

 1) If a VXLAN interface is created with no groups, we can crash on
    reception of packets.  Fix from Mike Rapoport.

 2) Missing includes in CPTS driver, from Alexei Starovoitov.

 3) Fix string validations in isdnloop driver, from YOSHIFUJI Hideaki
    and Dan Carpenter.

 4) Missing irq.h include in bnxw2x, enic, and qlcnic drivers.  From
    Josh Boyer.

 5) AF_PACKET transmit doesn't statistically count TX drops, from Daniel
    Borkmann.

 6) Byte-Queue-Limit enabled drivers aren't handled properly in
    AF_PACKET transmit path, also from Daniel Borkmann.

    Same problem exists in pktgen, and Daniel fixed it there too.

 7) Fix resource leaks in driver probe error paths of new sxgbe driver,
    from Francois Romieu.

 8) Truesize of SKBs can gradually get more and more corrupted in NAPI
    packet recycling path, fix from Eric Dumazet.

 9) Fix uniprocessor netfilter build, from Florian Westphal.  In the
    longer term we should perhaps try to find a way for ARRAY_SIZE() to
    work even with zero sized array elements.

10) Fix crash in netfilter conntrack extensions due to mis-estimation of
    required extension space.  From Andrey Vagin.

11) Since we commit table rule updates before trying to copy the
    counters back to userspace (it's the last action we perform), we
    really can't signal the user copy with an error as we are beyond the
    point from which we can unwind everything.  This causes all kinds of
    use after free crashes and other mysterious behavior.

    From Thomas Graf.

12) Restore previous behvaior of div/mod by zero in BPF filter
    processing.  From Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
  net: sctp: wake up all assocs if sndbuf policy is per socket
  isdnloop: several buffer overflows
  netdev: remove potentially harmful checks
  pktgen: fix xmit test for BQL enabled devices
  net/at91_ether: avoid NULL pointer dereference
  tipc: Let tipc_release() return 0
  at86rf230: fix MAX_CSMA_RETRIES parameter
  mac802154: fix duplicate #include headers
  sxgbe: fix duplicate #include headers
  net: filter: be more defensive on div/mod by X==0
  netfilter: Can't fail and free after table replacement
  xen-netback: Trivial format string fix
  net: bcmgenet: Remove unnecessary version.h inclusion
  net: smc911x: Remove unused local variable
  bonding: Inactive slaves should keep inactive flag's value
  netfilter: nf_tables: fix wrong format in request_module()
  netfilter: nf_tables: set names cannot be larger than 15 bytes
  netfilter: nf_conntrack: reserve two bytes for nf_ct_ext->len
  netfilter: Add {ipt,ip6t}_osf aliases for xt_osf
  netfilter: x_tables: allow to use cgroup match for LOCAL_IN nf hooks
  ...
2014-04-08 12:41:23 -07:00
Linus Torvalds
0afccc4cce More staging patches for 3.15-rc1
Here are some more staging patches for 3.15-rc1.  They include a
 late-submission of a wireless driver that a bunch of people seem to have
 the hardware for now.  As it's stand-alone, it should be fine (now
 passes the 0-day random build bot tests.)  There are also some fixes for
 the unisys drivers, as they were causing havoc on a number of different
 machines.  To resolve all of those issues, we just mark the driver as
 BROKEN now, and we can fix it up "properly" over time.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlNEO1sACgkQMUfUDdst+ymMegCgy/ZpC010cymW2ZYgDxqjEEss
 3xUAoLA0Psv1z59hZv4EwrfStxzTiYAQ
 =waW7
 -----END PGP SIGNATURE-----

Merge tag 'staging-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull more staging patches from Greg KH:
 "Here are some more staging patches for 3.15-rc1.

  They include a late-submission of a wireless driver that a bunch of
  people seem to have the hardware for now.  As it's stand-alone, it
  should be fine (now passes the 0-day random build bot tests).

  There are also some fixes for the unisys drivers, as they were causing
  havoc on a number of different machines.  To resolve all of those
  issues, we just mark the driver as BROKEN now, and we can fix it up
  "properly" over time"

* tag 'staging-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8723au: The 8723 only has two paths
  Staging: unisys: mark drivers as BROKEN
  Staging: unisys: verify that a control channel exists
  staging: unisys: Add missing close parentheses in filexfer.c
  staging: r8723au: Fix build problem when RFKILL is not selected
  staging: r8723au: Fix randconfig build errors
  staging: r8723au: Turn on build of new driver
  staging: r8723au: Additional source patches
  staging: r8723au: Add source files for new driver - part 4
  staging: r8723au: Add source files for new driver - part 3
  staging: r8723au: Add source files for new driver - part 2
  staging: r8723au: Add source files for new driver - part 1
2014-04-08 12:37:29 -07:00
Linus Torvalds
d586c86d50 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull second set of s390 patches from Martin Schwidefsky:
 "The second part of Heikos uaccess rework, the page table walker for
  uaccess is now a thing of the past (yay!)

  The code change to fix the theoretical TLB flush problem allows us to
  add a TLB flush optimization for zEC12, this machine has new
  instructions that allow to do CPU local TLB flushes for single pages
  and for all pages of a specific address space.

  Plus the usual bug fixing and some more cleanup"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/uaccess: rework uaccess code - fix locking issues
  s390/mm,tlb: optimize TLB flushing for zEC12
  s390/mm,tlb: safeguard against speculative TLB creation
  s390/irq: Use defines for external interruption codes
  s390/irq: Add defines for external interruption codes
  s390/sclp: add timeout for queued requests
  kvm/s390: also set guest pages back to stable on kexec/kdump
  lcs: Add missing destroy_timer_on_stack()
  s390/tape: Add missing destroy_timer_on_stack()
  s390/tape: Use del_timer_sync()
  s390/3270: fix crash with multiple reset device requests
  s390/bitops,atomic: add missing memory barriers
  s390/zcrypt: add length check for aligned data to avoid overflow in msg-type 6
2014-04-08 12:02:28 -07:00
Linus Torvalds
e9f37d3a8d Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "Highlights:

   - drm:

     Generic display port aux features, primary plane support, drm
     master management fixes, logging cleanups, enforced locking checks
     (instead of docs), documentation improvements, minor number
     handling cleanup, pseudofs for shared inodes.

   - ttm:

     add ability to allocate from both ends

   - i915:

     broadwell features, power domain and runtime pm, per-process
     address space infrastructure (not enabled)

   - msm:

     power management, hdmi audio support

   - nouveau:

     ongoing GPU fault recovery, initial maxwell support, random fixes

   - exynos:

     refactored driver to clean up a lot of abstraction, DP support
     moved into drm, LVDS bridge support added, parallel panel support

   - gma500:

     SGX MMU support, SGX irq handling, asle irq work fixes

   - radeon:

     video engine bringup, ring handling fixes, use dp aux helpers

   - vmwgfx:

     add rendernode support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits)
  DRM: armada: fix corruption while loading cursors
  drm/dp_helper: don't return EPROTO for defers (v2)
  drm/bridge: export ptn3460_init function
  drm/exynos: remove MODULE_DEVICE_TABLE definitions
  ARM: dts: exynos4412-trats2: enable exynos/fimd node
  ARM: dts: exynos4210-trats: enable exynos/fimd node
  ARM: dts: exynos4412-trats2: add panel node
  ARM: dts: exynos4210-trats: add panel node
  ARM: dts: exynos4: add MIPI DSI Master node
  drm/panel: add S6E8AA0 driver
  ARM: dts: exynos4210-universal_c210: add proper panel node
  drm/panel: add ld9040 driver
  panel/ld9040: add DT bindings
  panel/s6e8aa0: add DT bindings
  drm/exynos: add DSIM driver
  exynos/dsim: add DT bindings
  drm/exynos: disallow fbdev initialization if no device is connected
  drm/mipi_dsi: create dsi devices only for nodes with reg property
  drm/mipi_dsi: add flags to DSI messages
  Skip intel_crt_init for Dell XPS 8700
  ...
2014-04-08 09:52:16 -07:00
Dan Carpenter
7563487cbf isdnloop: several buffer overflows
There are three buffer overflows addressed in this patch.

1) In isdnloop_fake_err() we add an 'E' to a 60 character string and
then copy it into a 60 character buffer.  I have made the destination
buffer 64 characters and I'm changed the sprintf() to a snprintf().

2) In isdnloop_parse_cmd(), p points to a 6 characters into a 60
character buffer so we have 54 characters.  The ->eazlist[] is 11
characters long.  I have modified the code to return if the source
buffer is too long.

3) In isdnloop_command() the cbuf[] array was 60 characters long but the
max length of the string then can be up to 79 characters.  I made the
cbuf array 80 characters long and changed the sprintf() to snprintf().
I also removed the temporary "dial" buffer and changed it to use "p"
directly.

Unfortunately, we pass the "cbuf" string from isdnloop_command() to
isdnloop_writecmd() which truncates anything over 60 characters to make
it fit in card->omsg[].  (It can accept values up to 255 characters so
long as there is a '\n' character every 60 characters).  For now I have
just fixed the memory corruption bug and left the other problems in this
driver alone.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-08 12:41:13 -04:00
Russell King
c39b06951f DRM: armada: fix corruption while loading cursors
Loading cursors to the LCD controller's SRAM can be corrupted when the
configured pixel clock is relatively slow.  This seems to be caused
when we write back-to-back to the SRAM registers.

There doesn't appear to be any status register we can read to check
when an access has completed.

Inserting a dummy read between the writes appears to fix the problem.

Cc: <stable@vger.kernel.org> # 3.13
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-08 10:51:03 +10:00
Linus Torvalds
c8d9762aff Fix arm build of drivers/xen/events/
The merge of irq-core-for-linus branch broke it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQEcBAABAgAGBQJTQqWqAAoJEFxbo/MsZsTRCTAH/j9JC0q5OuCPoZlvhHgrOsaI
 Z8gZj9MsU5zBiGrBrp96ULHVBxe/PWSCFhPWvxykhS5d/tgpeg0l2B2n7KrsgtrE
 YSepxlyGzGK5UUYZmCCiE4fjZA2GrtHtz4tET3lu5lyHWCNgHuApmGDsoIJ+PH13
 wCokIJcBpVu+V7nsxSifguud1R9ZEA7gTwp1q5omSerrqNLPPYuxlwSRTDIS4pEl
 5mhP5C9ej+u7Dx7h4uRpk7p2YMQy1pnPtJIq3TBH2B/l/u96b+gyXQlLhf289LSP
 RwiDhurZprLZmaM8W1qrQwqsoiPY/uQQFObp0icvrarK7SfYtiot+guK3oRn1NI=
 =1P/a
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull Xen build fix from David Vrabel:
 "Fix arm build of drivers/xen/events/

  The merge of irq-core-for-linus branch broke it"

* tag 'stable/for-linus-3.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  Xen: do hv callback accounting only on x86
2014-04-07 17:50:18 -07:00
Linus Torvalds
26c12d9334 Merge branch 'akpm' (incoming from Andrew)
Merge second patch-bomb from Andrew Morton:
 - the rest of MM
 - zram updates
 - zswap updates
 - exit
 - procfs
 - exec
 - wait
 - crash dump
 - lib/idr
 - rapidio
 - adfs, affs, bfs, ufs
 - cris
 - Kconfig things
 - initramfs
 - small amount of IPC material
 - percpu enhancements
 - early ioremap support
 - various other misc things

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (156 commits)
  MAINTAINERS: update Intel C600 SAS driver maintainers
  fs/ufs: remove unused ufs_super_block_third pointer
  fs/ufs: remove unused ufs_super_block_second pointer
  fs/ufs: remove unused ufs_super_block_first pointer
  fs/ufs/super.c: add __init to init_inodecache()
  doc/kernel-parameters.txt: add early_ioremap_debug
  arm64: add early_ioremap support
  arm64: initialize pgprot info earlier in boot
  x86: use generic early_ioremap
  mm: create generic early_ioremap() support
  x86/mm: sparse warning fix for early_memremap
  lglock: map to spinlock when !CONFIG_SMP
  percpu: add preemption checks to __this_cpu ops
  vmstat: use raw_cpu_ops to avoid false positives on preemption checks
  slub: use raw_cpu_inc for incrementing statistics
  net: replace __this_cpu_inc in route.c with raw_cpu_inc
  modules: use raw_cpu_write for initialization of per cpu refcount.
  mm: use raw_cpu ops for determining current NUMA node
  percpu: add raw_cpu_ops
  slub: fix leak of 'name' in sysfs_slab_add
  ...
2014-04-07 16:38:06 -07:00
Uwe Kleine-König
ce816fa88c Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAP
If the renamed symbol is defined lib/iomap.c implements ioport_map and
ioport_unmap and currently (nearly) all platforms define the port
accessor functions outb/inb and friend unconditionally.  So
HAS_IOPORT_MAP is the better name for this.

Consequently NO_IOPORT is renamed to NO_IOPORT_MAP.

The motivation for this change is to reintroduce a symbol HAS_IOPORT
that signals if outb/int et al are available.  I will address that at
least one merge window later though to keep surprises to a minimum and
catch new introductions of (HAS|NO)_IOPORT.

The changes in this commit were done using:

	$ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:11 -07:00
Dan Carpenter
b6a83d928c drivers/misc/sgi-gru/grukdump.c: cleanup gru_dump_context() a little
"ret" is zero here so we can remove the "!ret" part of the condition.
"uhdr" is alread a __user pointer so we can remove the cast.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:09 -07:00
Alexandre Bounine
2aaf308b95 rapidio: rework device hierarchy and introduce mport class of devices
This patch removes an artificial RapidIO bus root device and establishes
actual device hierarchy by providing reference to real parent devices.
It also introduces device class for RapidIO controller devices (on-chip
or an eternal bridge, known as "mport").

Existing implementation was sufficient for SoC-based platforms that have
a single RapidIO controller.  With introduction of devices using
multiple RapidIO controllers and PCIe-to-RapidIO bridges the old scheme
is very limiting or does not work at all.  The implemented changes allow
to properly reference platform's local RapidIO mport devices and provide
device details needed for upper layers.

This change to RapidIO device hierarchy does not break any known
existing kernel or user space interfaces.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
Cc: Jerry Jacobs <jerry.jacobs@prodrive-technologies.com>
Cc: Arno Tiemersma <arno.tiemersma@prodrive-technologies.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:07 -07:00
Alexandre Bounine
40f847baf5 drivers/rapidio/devices/tsi721_dma.c: optimize use of BDMA descriptors
Combine SG entries describing single contiguous memory block into one
Tsi721 BDMA descriptor.  This reduces number of hardware descriptors
required for large data transfers and improves performance on the PCIe
side by reducing number of descriptor fetch requests.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:07 -07:00
Joonsoo Kim
f4659d8e62 zram: support REQ_DISCARD
zram is ram based block device and can be used by backend of filesystem.
When filesystem deletes a file, it normally doesn't do anything on data
block of that file.  It just marks on metadata of that file.  This
behavior has no problem on disk based block device, but has problems on
ram based block device, since we can't free memory used for data block.
To overcome this disadvantage, there is REQ_DISCARD functionality.  If
block device support REQ_DISCARD and filesystem is mounted with discard
option, filesystem sends REQ_DISCARD to block device whenever some data
blocks are discarded.  All we have to do is to handle this request.

This patch implements to flag up QUEUE_FLAG_DISCARD and handle this
REQ_DISCARD request.  With it, we can free memory used by zram if it isn't
used.

[akpm@linux-foundation.org: tweak comments]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:02 -07:00
Sergey Senozhatsky
56b4e8cb85 zram: use scnprintf() in attrs show() methods
sysfs.txt documentation lists the following requirements:

 - The buffer will always be PAGE_SIZE bytes in length. On i386, this
   is 4096.

 - show() methods should return the number of bytes printed into the
   buffer. This is the return value of scnprintf().

 - show() should always use scnprintf().

Use scnprintf() in show() functions.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:02 -07:00
Minchan Kim
60a726e333 zram: propagate error to user
When we initialized zcomp with single, we couldn't change
max_comp_streams without zram reset but current interface doesn't show
any error to user and even it changes max_comp_streams's value without
any effect so it would make user very confusing.

This patch prevents max_comp_streams's change when zcomp was initialized
as single zcomp and emit the error to user(ex, echo).

[akpm@linux-foundation.org: don't return with the lock held, per Sergey]
[fengguang.wu@intel.com: fix coccinelle warnings]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:02 -07:00
Sergey Senozhatsky
fcfa8d95ca zram: return error-valued pointer from zcomp_create()
Instead of returning just NULL, return ERR_PTR from zcomp_create() if
compressing backend creation has failed.  ERR_PTR(-EINVAL) for unsupported
compression algorithm request, ERR_PTR(-ENOMEM) for allocation (zcomp or
compression stream) error.

Perform IS_ERR() check of returned from zcomp_create() value in
disksize_store() and set return code to PTR_ERR().

Change suggested by Jerome Marchand.

[akpm@linux-foundation.org: clean up error recovery flow]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:02 -07:00
Sergey Senozhatsky
d61f98c70e zram: move comp allocation out of init_lock
While fixing lockdep spew of ->init_lock reported by Sasha Levin [1],
Minchan Kim noted [2] that it's better to move compression backend
allocation (using GPF_KERNEL) out of the ->init_lock lock, same way as
with zram_meta_alloc(), in order to prevent the same lockdep spew.

[1] https://lkml.org/lkml/2014/2/27/337
[2] https://lkml.org/lkml/2014/3/3/32

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Minchan Kim <minchan@kernel.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:02 -07:00
Sergey Senozhatsky
6e76668e41 zram: add lz4 algorithm backend
Introduce LZ4 compression backend and make it available for selection.
LZ4 support is optional and requires user to set ZRAM_LZ4_COMPRESS config
option.  The default compression backend is LZO.

TEST

(x86_64, core i5, 2 cores + 2 hyperthreading, zram disk size 1G,
ext4 file system, 3 compression streams)

iozone -t 3 -R -r 16K -s 60M -I +Z

       Test           LZO           LZ4
----------------------------------------------
  Initial write   1642744.62    1317005.09
        Rewrite   2498980.88    1800645.16
           Read   3957026.38    5877043.75
        Re-read   3950997.38    5861847.00
   Reverse Read   2937114.56    5047384.00
    Stride read   2948163.19    4929587.38
    Random read   3292692.69    4880793.62
 Mixed workload   1545602.62    3502940.38
   Random write   2448039.75    1758786.25
         Pwrite   1670051.03    1338329.69
          Pread   2530682.00    5097177.62
         Fwrite   3232085.62    3275942.56
          Fread   6306880.25    6645271.12

So on my system LZ4 is slower in write-only tests, while it performs
better in read-only and mixed (reads + writes) tests.

Official LZ4 benchmarks available here http://code.google.com/p/lz4/
(linux kernel uses revision r90).

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:01 -07:00
Sergey Senozhatsky
e46b8a030d zram: make compression algorithm selection possible
Add and document `comp_algorithm' device attribute.  This attribute allows
to show supported compression and currently selected compression
algorithms:

	cat /sys/block/zram0/comp_algorithm
	[lzo] lz4

and change selected compression algorithm:
	echo lzo > /sys/block/zram0/comp_algorithm

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:01 -07:00
Sergey Senozhatsky
fe8eb122c8 zram: add set_max_streams knob
This patch allows to change max_comp_streams on initialised zcomp.

Introduce zcomp set_max_streams() knob, zcomp_strm_multi_set_max_streams()
and zcomp_strm_single_set_max_streams() callbacks to change streams limit
for zcomp_strm_multi and zcomp_strm_single, accordingly.  set_max_streams
for single steam zcomp does nothing.

If user has lowered the limit, then zcomp_strm_multi_set_max_streams()
attempts to immediately free extra streams (as much as it can, depending
on idle streams availability).

Note, this patch does not allow to change stream 'policy' from single to
multi stream (or vice versa) on already initialised compression backend.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:01 -07:00
Sergey Senozhatsky
beca3ec71f zram: add multi stream functionality
Existing zram (zcomp) implementation has only one compression stream
(buffer and algorithm private part), so in order to prevent data
corruption only one write (compress operation) can use this compression
stream, forcing all concurrent write operations to wait for stream lock
to be released.  This patch changes zcomp to keep a compression streams
list of user-defined size (via sysfs device attr).  Each write operation
still exclusively holds compression stream, the difference is that we
can have N write operations (depending on size of streams list)
executing in parallel.  See TEST section later in commit message for
performance data.

Introduce struct zcomp_strm_multi and a set of functions to manage
zcomp_strm stream access.  zcomp_strm_multi has a list of idle
zcomp_strm structs, spinlock to protect idle list and wait queue, making
it possible to perform parallel compressions.

The following set of functions added:
- zcomp_strm_multi_find()/zcomp_strm_multi_release()
  find and release a compression stream, implement required locking
- zcomp_strm_multi_create()/zcomp_strm_multi_destroy()
  create and destroy zcomp_strm_multi

zcomp ->strm_find() and ->strm_release() callbacks are set during
initialisation to zcomp_strm_multi_find()/zcomp_strm_multi_release()
correspondingly.

Each time zcomp issues a zcomp_strm_multi_find() call, the following set
of operations performed:

- spin lock strm_lock
- if idle list is not empty, remove zcomp_strm from idle list, spin
  unlock and return zcomp stream pointer to caller
- if idle list is empty, current adds itself to wait queue. it will be
  awaken by zcomp_strm_multi_release() caller.

zcomp_strm_multi_release():
- spin lock strm_lock
- add zcomp stream to idle list
- spin unlock, wake up sleeper

Minchan Kim reported that spinlock-based locking scheme has demonstrated
a severe perfomance regression for single compression stream case,
comparing to mutex-based (see https://lkml.org/lkml/2014/2/18/16)

base                      spinlock                    mutex

==Initial write           ==Initial write             ==Initial  write
records:  5               records:  5                 records:   5
avg:      1642424.35      avg:      699610.40         avg:       1655583.71
std:      39890.95(2.43%) std:      232014.19(33.16%) std:       52293.96
max:      1690170.94      max:      1163473.45        max:       1697164.75
min:      1568669.52      min:      573429.88         min:       1553410.23
==Rewrite                 ==Rewrite                   ==Rewrite
records:  5               records:  5                 records:   5
avg:      1611775.39      avg:      501406.64         avg:       1684419.11
std:      17144.58(1.06%) std:      15354.41(3.06%)   std:       18367.42
max:      1641800.95      max:      531356.78         max:       1706445.84
min:      1593515.27      min:      488817.78         min:       1655335.73

When only one compression stream available, mutex with spin on owner
tends to perform much better than frequent wait_event()/wake_up().  This
is why single stream implemented as a special case with mutex locking.

Introduce and document zram device attribute max_comp_streams.  This
attr shows and stores current zcomp's max number of zcomp streams
(max_strm).  Extend zcomp's zcomp_create() with `max_strm' parameter.
`max_strm' limits the number of zcomp_strm structs in compression
backend's idle list (max_comp_streams).

max_comp_streams used during initialisation as follows:
-- passing to zcomp_create() max_strm equals to 1 will initialise zcomp
using single compression stream zcomp_strm_single (mutex-based locking).
-- passing to zcomp_create() max_strm greater than 1 will initialise zcomp
using multi compression stream zcomp_strm_multi (spinlock-based locking).

default max_comp_streams value is 1, meaning that zram with single stream
will be initialised.

Later patch will introduce configuration knob to change max_comp_streams
on already initialised and used zcomp.

TEST
iozone -t 3 -R -r 16K -s 60M -I +Z

       test           base       1 strm (mutex)     3 strm (spinlock)
-----------------------------------------------------------------------
 Initial write      589286.78       583518.39          718011.05
       Rewrite      604837.97       596776.38         1515125.72
  Random write      584120.11       595714.58         1388850.25
        Pwrite      535731.17       541117.38          739295.27
        Fwrite     1418083.88      1478612.72         1484927.06

Usage example:
set max_comp_streams to 4
        echo 4 > /sys/block/zram0/max_comp_streams

show current max_comp_streams (default value is 1).
        cat /sys/block/zram0/max_comp_streams

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:01 -07:00
Sergey Senozhatsky
9cc97529a1 zram: factor out single stream compression
This is preparation patch to add multi stream support to zcomp.

Introduce struct zcomp_strm_single and a set of functions to manage
zcomp_strm stream access.  zcomp_strm_single implements single compession
stream, same way as current zcomp implementation.  This moves zcomp_strm
stream control and locking from zcomp, so compressing backend zcomp is not
aware of required locking.

Single and multi streams require different locking schemes.  Minchan Kim
reported that spinlock-based locking scheme (which is used in multi stream
implementation) has demonstrated a severe perfomance regression for single
compression stream case, comparing to mutex-based.  see
https://lkml.org/lkml/2014/2/18/16

The following set of functions added:
- zcomp_strm_single_find()/zcomp_strm_single_release()
  find and release a compression stream, implement required locking
- zcomp_strm_single_create()/zcomp_strm_single_destroy()
  create and destroy zcomp_strm_single

New ->strm_find() and ->strm_release() callbacks added to zcomp, which are
set to zcomp_strm_single_find() and zcomp_strm_single_release() during
initialisation.  Instead of direct locking and zcomp_strm access from
zcomp_strm_find() and zcomp_strm_release(), zcomp now calls ->strm_find()
and ->strm_release() correspondingly.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:01 -07:00
Sergey Senozhatsky
b7ca232ee7 zram: use zcomp compressing backends
Do not perform direct LZO compress/decompress calls, initialise
and use zcomp LZO backend (single compression stream) instead.

[akpm@linux-foundation.org: resolve conflicts with zram-delete-zram_init_device-fix.patch]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:01 -07:00
Sergey Senozhatsky
e7e1ef439d zram: introduce compressing backend abstraction
ZRAM performs direct LZO compression algorithm calls, making it the one
and only option.  While LZO is generally performs well, LZ4 algorithm
tends to have a faster decompression (see http://code.google.com/p/lz4/
for full report)

	Name            Ratio  C.speed D.speed
	                        MB/s    MB/s
	LZ4 (r101)      2.084    422    1820
	LZO 2.06        2.106    414     600

Thus, users who have mostly read (decompress) usage scenarious or mixed
workflow (writes with relatively high read ops number) will benefit from
using LZ4 compression backend.

Introduce compressing backend abstraction zcomp in order to support
multiple compression algorithms with the following set of operations:

        .create
        .destroy
        .compress
        .decompress

Schematically zram write() usually contains the following steps:
0) preparation (decompression of partioal IO, etc.)
1) lock buffer_lock mutex (protects meta compress buffers)
2) compress (using meta compress buffers)
3) alloc and map zs_pool object
4) copy compressed data (from meta compress buffers) to object allocated by 3)
5) free previous pool page, assign a new one
6) unlock buffer_lock mutex

As we can see, compressing buffers must remain untouched from 1) to 4),
because, otherwise, concurrent write() can overwrite data.  At the same
time, zram_meta must be aware of a) specific compression algorithm memory
requirements and b) necessary locking to protect compression buffers.  To
remove requirement a) new struct zcomp_strm introduced, which contains a
compress/decompress `buffer' and compression algorithm `private' part.
While struct zcomp implements zcomp_strm stream handling and locking and
removes requirement b) from zram meta.  zcomp ->create() and ->destroy(),
respectively, allocate and deallocate algorithm specific zcomp_strm
`private' part.

Every zcomp has zcomp stream and mutex to protect its compression stream.
Stream usage semantics remains the same -- only one write can hold stream
lock and use its buffers.  zcomp_strm_find() turns caller into exclusive
user of a stream (holding stream mutex until zram release stream), and
zcomp_strm_release() makes zcomp stream available (unlock the stream
mutex).  Hence no concurrent write (compression) operations possible at
the moment.

iozone -t 3 -R -r 16K -s 60M -I +Z

       test            base           patched
--------------------------------------------------
  Initial write      597992.91       591660.58
        Rewrite      609674.34       616054.97
           Read     2404771.75      2452909.12
        Re-read     2459216.81      2470074.44
   Reverse Read     1652769.66      1589128.66
    Stride read     2202441.81      2202173.31
    Random read     2236311.47      2276565.31
 Mixed workload     1423760.41      1709760.06
   Random write      579584.08       615933.86
         Pwrite      597550.02       594933.70
          Pread     1703672.53      1718126.72
         Fwrite     1330497.06      1461054.00
          Fread     3922851.00      3957242.62

Usage examples:

	comp = zcomp_create(NAME) /* NAME e.g. "lzo" */

which initialises compressing backend if requested algorithm is supported.

Compress:
	zstrm = zcomp_strm_find(comp)
	zcomp_compress(comp, zstrm, src, &dst_len)
	[..] /* copy compressed data */
	zcomp_strm_release(comp, zstrm)

Decompress:
	zcomp_decompress(comp, src, src_len, dst);

Free compessing backend and its zcomp stream:
	zcomp_destroy(comp)

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:01 -07:00
Sergey Senozhatsky
b67d1ec189 zram: delete zram_init_device()
allocate new `zram_meta' in disksize_store() only for uninitialised zram
device, saving a number of allocations and deallocations in case if
disksize_store() was called on currently used device.  at the same time
zram_meta stack variable is not necessary, because we can set ->meta
directly.  there is also no need in setting QUEUE_FLAG_NONROT queue on
every disksize_store(), set it once during device creation.

[minchan@kernel.org: handle zram->meta alloc fail case]
[minchan@kernel.org: prevent lockdep spew of init_lock]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:00 -07:00
Sergey Senozhatsky
e64cd51d2f zram: move zram size warning to documentation
Move zram warning about disksize and size of memory correlation to zram
documentation.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:00 -07:00
Sergey Senozhatsky
59fc86a492 zram: drop not used table `count' member
struct table `count' member is not used.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:00 -07:00
Sergey Senozhatsky
6444724939 zram: report failed read and write stats
zram accounted but did not report numbers of failed read and write
queries.  make these stats available as failed_reads and failed_writes
attrs.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:00 -07:00
Sergey Senozhatsky
a68eb3b65e zram: remove zram stats code duplication
Introduce ZRAM_ATTR_RO macro that generates device_attribute and default
ATTR show() function for existing atomic64_t zram stats.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:00 -07:00
Sergey Senozhatsky
90a7806ea9 zram: use atomic64_t for all zram stats
This is a preparation patch for stats code duplication removal.

1) use atomic64_t for `pages_zero' and `pages_stored' zram stats.

2) `compr_size' and `pages_zero' struct zram_stats members did not
   follow the existing device attr naming scheme: zram_stats.ATTR has
   ATTR_show() function.  rename them:

   -- compr_size -> compr_data_size
   -- pages_zero -> zero_pages

Minchan Kim's note:
 If we really have trouble with atomic stat operation, we could
 change it with percpu_counter so that it could solve atomic overhead and
 unnecessary memory space by introducing unsigned long instead of 64bit
 atomic_t.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:59 -07:00
Sergey Senozhatsky
b7cccf8b40 zram: remove good and bad compress stats
Remove `good' and `bad' compressed sub-requests stats.  RW request may
cause a number of RW sub-requests.  zram used to account `good' compressed
sub-queries (with compressed size less than 50% of original size), `bad'
compressed sub-queries (with compressed size greater that 75% of original
size), leaving sub-requests with compression size between 50% and 75% of
original size not accounted and not reported.  zram already accounts each
sub-request's compression size so we can calculate real device compression
ratio.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:59 -07:00
Sergey Senozhatsky
be257c6130 zram: do not pass rw argument to __zram_make_request()
Do not pass rw argument down the __zram_make_request() -> zram_bvec_rw()
chain, decode it in zram_bvec_rw() instead.  Besides, this is the place
where we distinguish READ and WRITE bio data directions, so account zram
RW stats here, instead of __zram_make_request().  This also allows to
account a real number of zram READ/WRITE operations, not just requests
(single RW request may cause a number of zram RW ops with separate
locking, compression/decompression, etc).

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:59 -07:00
Sergey Senozhatsky
be2d1d56c8 zram: drop `init_done' struct zram member
Introduce init_done() helper function which allows us to drop `init_done'
struct zram member.  init_done() uses the fact that ->init_done == 1
equals to ->meta != NULL.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:59 -07:00
Andrew Morton
179e09637c drivers/lguest/page_tables.c: rename do_set_pte()
"mm: introduce vm_ops->map_pages()" wants to export a do_set_pte() from core
kernel.  Rename lguest's do_set_pte() to something more lguest-specific.

Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:52 -07:00
Linus Torvalds
467a9e1633 CPU hotplug notifiers registration fixes for 3.15-rc1
The purpose of this single series of commits from Srivatsa S Bhat (with
 a small piece from Gautham R Shenoy) touching multiple subsystems that use
 CPU hotplug notifiers is to provide a way to register them that will not
 lead to deadlocks with CPU online/offline operations as described in the
 changelog of commit 93ae4f978c (CPU hotplug: Provide lockless versions
 of callback registration functions).
 
 The first three commits in the series introduce the API and document it
 and the rest simply goes through the users of CPU hotplug notifiers and
 converts them to using the new method.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTQow2AAoJEILEb/54YlRxW4QQAJlYRDUzwFJzJzYhltQYuVR+
 4D74XMtvXgoJfg3cwdSWvMKKpJZnA9BVN0f7Hcx9wYmgdexYUuHeZJmMNyc3S2+g
 KjKBIsugvgmZhHbbLd6TJ6GBbhGT5JLt9VmSfL9zIkveInU1YHFUUqL/mxdHm4J0
 BSGKjk2rN3waRJgmY+xfliFLtQjDKFwJpMuvrgtoUyfas3f4sIV43UNbqdvA/weJ
 rzedxXOlKH/id4b56lj/4iIzcoL3mwvJJ7r6n0CEMsKv87z09kqR0O+69Tsq/cgs
 j17CsvoJOmZGk3QTeKVMQWBsvk6aPoDu3zK83gLbQMt+qjOpSTbJLz/3HZw4/TrW
 ss4nuZne1DLMGS+6hoxYbTP+6Ni//Kn+l/LrHc5jb7m1X3lMO4W2aV3IROtIE1rv
 lEP1IG01NU4u9YwkVj1dyhrkSp8tLPul4SrUK8W+oNweOC5crjJV7vJbIPJgmYiM
 IZN55wln0yVRtR4TX+rmvN0PixsInE8MeaVCmReApyF9pdzul/StxlBze5BKLSJD
 cqo1kNPpsmdxoDucqUpQ/gSvy+IOl2qnlisB5PpV93sk7De6TFDYrGHxjYIW7jMf
 StXwdCDDQhzd2Q8Kfpp895A1dbIl8rKtwA6bTU2eX+BfMVFzuMdT44cvosx1+UdQ
 sWl//rg76nb13dFjvF+q
 =SW7Q
 -----END PGP SIGNATURE-----

Merge tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull CPU hotplug notifiers registration fixes from Rafael Wysocki:
 "The purpose of this single series of commits from Srivatsa S Bhat
  (with a small piece from Gautham R Shenoy) touching multiple
  subsystems that use CPU hotplug notifiers is to provide a way to
  register them that will not lead to deadlocks with CPU online/offline
  operations as described in the changelog of commit 93ae4f978c ("CPU
  hotplug: Provide lockless versions of callback registration
  functions").

  The first three commits in the series introduce the API and document
  it and the rest simply goes through the users of CPU hotplug notifiers
  and converts them to using the new method"

* tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
  net/iucv/iucv.c: Fix CPU hotplug callback registration
  net/core/flow.c: Fix CPU hotplug callback registration
  mm, zswap: Fix CPU hotplug callback registration
  mm, vmstat: Fix CPU hotplug callback registration
  profile: Fix CPU hotplug callback registration
  trace, ring-buffer: Fix CPU hotplug callback registration
  xen, balloon: Fix CPU hotplug callback registration
  hwmon, via-cputemp: Fix CPU hotplug callback registration
  hwmon, coretemp: Fix CPU hotplug callback registration
  thermal, x86-pkg-temp: Fix CPU hotplug callback registration
  octeon, watchdog: Fix CPU hotplug callback registration
  oprofile, nmi-timer: Fix CPU hotplug callback registration
  intel-idle: Fix CPU hotplug callback registration
  clocksource, dummy-timer: Fix CPU hotplug callback registration
  drivers/base/topology.c: Fix CPU hotplug callback registration
  acpi-cpufreq: Fix CPU hotplug callback registration
  zsmalloc: Fix CPU hotplug callback registration
  scsi, fcoe: Fix CPU hotplug callback registration
  scsi, bnx2fc: Fix CPU hotplug callback registration
  scsi, bnx2i: Fix CPU hotplug callback registration
  ...
2014-04-07 14:55:46 -07:00
Jes Sorensen
dda26427bd staging: rtl8723au: The 8723 only has two paths
Converting the driver from the original RTL provided version, by error
converted the code to use four, which caused all sorts of issues. The
confusion was caused by the RTL driver having support for both two and
four paths, and in some places had RF_PATH_MAX = 3. At the same time
it kept the data structures hard coded for two paths, in particular
the ones matching the efuse data.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-07 12:53:00 -07:00
Greg Kroah-Hartman
806192c07d Staging: unisys: mark drivers as BROKEN
Turns out these drivers like to mess around with the system even if the
hardware they control isn't present.  That's not good, and people are
starting to report lots of issues with this in their build/boot testing.

So for now, let's just mark them as BROKEN, until the code gets
converted to use the proper driver model interaction (i.e. don't do
anything until the hardware is actually found in the system.)

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Benjamin Romer <benjamin.romer@unisys.com>
Cc: David Kershner <david.kershner@unisys.com>
Cc: someone <sparmaintainer@unisys.com>
Cc: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-07 12:49:36 -07:00
Sasha Levin
b0e2796029 Staging: unisys: verify that a control channel exists
The code didn't verify that a control channel exists before trying to
use it. It caused NULL ptr derefs which were easy to trigger by an
unpriviliged user simply by reading the proc file, causing:

[   68.161404] BUG: unable to handle kernel NULL pointer dereference at           (null)
[   68.162442] IP: visorchannel_read (drivers/staging/unisys/visorchannel/visorchannel_funcs.c:225)
[   68.163165] PGD 5ca21067 PUD 5ca20067 PMD 0
[   68.163712] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[   68.164390] Dumping ftrace buffer:
[   68.164793]    (ftrace buffer empty)
[   68.165220] Modules linked in:
[   68.165601] CPU: 0 PID: 7915 Comm: cat Tainted: G        W     3.14.0-next-20140403-sasha-00012-gef5fa7d-dirty #373
[   68.166821] task: ffff88006e8c3000 ti: ffff88005ca30000 task.ti: ffff88005ca30000
[   68.167689] RIP: visorchannel_read (drivers/staging/unisys/visorchannel/visorchannel_funcs.c:225)
[   68.168683] RSP: 0018:ffff88005ca31e58  EFLAGS: 00010282
[   68.169302] RAX: ffff88005ca10000 RBX: ffff88005ca31e97 RCX: 0000000000000001
[   68.170019] RDX: ffff88005ca31e97 RSI: 0000000000000bd6 RDI: 0000000000000000
[   68.170019] RBP: ffff88005ca31e78 R08: 0000000000000000 R09: 0000000000000000
[   68.170019] R10: ffff880000000000 R11: 0000000000000001 R12: 0000000000000001
[   68.170019] R13: 0000000000000bd6 R14: 0000000000000000 R15: 0000000000008000
[   68.170019] FS:  00007f0e8c041700(0000) GS:ffff88007be00000(0000) knlGS:0000000000000000
[   68.170019] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   68.170019] CR2: 0000000000000000 CR3: 000000006efe9000 CR4: 00000000000006b0
[   68.170019] Stack:
[   68.170019]  ffff88005ca31f50 ffff88005ca10000 000000000060e000 ffff88005ca31f50
[   68.170019]  ffff88005ca31ec8 ffffffff83e6f983 ffff8800780db810 0000000000008000
[   68.170019]  ffff88005ca31ec8 ffff88006da5f908 ffff8800780db800 000000000060e000
[   68.170019] Call Trace:
[   68.170019] proc_read_toolaction (drivers/staging/unisys/visorchipset/visorchipset_main.c:2541)
[   68.170019] proc_reg_read (fs/proc/inode.c:211)
[   68.170019] vfs_read (fs/read_write.c:408)
[   68.170019] SyS_read (fs/read_write.c:519 fs/read_write.c:511)
[   68.170019] tracesys (arch/x86/kernel/entry_64.S:749)
[   68.170019] Code: 00 00 66 66 66 66 90 55 48 89 e5 48 83 ec 20 48 89 5d e0 48 89 d3 4c 89 65 e8 49 89 cc 4c 89 6d f0 49 89 f5 4c 89 75 f8 49 89 fe <48> 8b 3f e8 4f f9 ff ff 85 c0 0f 88 97 00 00 00 4d 85 ed 0f 85
[   68.170019] RIP visorchannel_read (drivers/staging/unisys/visorchannel/visorchannel_funcs.c:225)
[   68.170019]  RSP <ffff88005ca31e58>
[   68.170019] CR2: 0000000000000000

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-07 12:48:17 -07:00
Masanari Iida
9c01e83ce7 staging: unisys: Add missing close parentheses in filexfer.c
Add missing close parentheses in filexfer.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-07 12:48:17 -07:00
Gilles Chanteperdrix
c293fb785b net/at91_ether: avoid NULL pointer dereference
The at91_ether driver calls macb_mii_init passing a 'struct macb'
structure whose tx_clk member is initialized to 0. However,
macb_handle_link_change() expects tx_clk to be the result of
a call to clk_get, and so IS_ERR(tx_clk) to be true if the clock
is invalid. This causes an oops when booting Linux 3.14 on the
csb637 board. The following changes avoids this.

Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-07 15:10:17 -04:00
Alexander Aring
39d7f32008 at86rf230: fix MAX_CSMA_RETRIES parameter
This patch fix a copy&paste failure for setting the MAX_CSMA_RETRIES
value of the at86rf212 chip which was introduced by commit
f2fdd67c6b ("ieee802154: enable
smart transmitter features of RF212")

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-07 14:59:26 -04:00