If a random MAC address is not requested during scan request, unicast probe
response frames are only accepted if the destination address matches the
interface address. This works fine for non-ML interfaces. However, with
MLO, the same interface can have multiple links, and a scan on a link would
be requested with the link address. In such cases, the probe response frame
gets dropped which is incorrect.
Therefore, add logic to check if any of the link addresses match the
destination address if the interface address does not match.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250516-bug_fix_mlo_scan-v2-2-12e59d9110ac@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an AP interface is already beaconing, a subsequent scan is not allowed
unless the user space explicitly sets the flag NL80211_SCAN_FLAG_AP in the
scan request. If this flag is not set, the scan request will be returned
with the error code -EOPNOTSUPP. However, this restriction currently
applies only to non-ML interfaces. For ML interfaces, scans are allowed
without this flag being explicitly set by the user space which is wrong.
This is because the beaconing check currently uses only the deflink, which
does not get set during MLO.
Hence to fix this, during MLO, use the existing helper
ieee80211_num_beaconing_links() to know if any of the link is beaconing.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250516-bug_fix_mlo_scan-v2-1-12e59d9110ac@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Checking the SOCK_WIFI_STATUS flag bit in sk_flags may give wrong results
since sk_flags are part of a union and the union is used otherwise. Add
sk_requests_wifi_status() which checks if sk is non-NULL, sk is a full
socket (so flags are valid) and checks the flag bit.
Fixes: 76a853f86c ("wifi: free SKBTX_WIFI_STATUS skb tx_flags flag")
Suggested-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250520223430.6875-1-spasswolf@web.de
[edit commit message, fix indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, ieee80211_num_beaconing_links() returns 0 when the interface
operates in non-ML mode. However, non-MLO mode is equivalent to having a
single link. Therefore, the function can handle the non-MLO case as well.
This adjustment will also eliminate the need for deflink usage in certain
scenarios.
Hence, implement changes to handle the non-MLO case as well. There is
no change in functionality, and no existing user-visible bug is getting
fixed. This update simply makes the function generic to handle all cases.
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Link: https://lore.kernel.org/linux-wireless/16499ad8e4b060ee04c8a8b3615fe8952aa7b07b.camel@sipsolutions.net/
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250515-fix_num_beaconing_links-v1-1-4a39e2704314@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As per IEEE 802.11be-2024 - 9.4.2.321, EHT operation element
contains MCS15 Disable subfield as the sixth bit, which is set when
MCS15 support is not enabled.
Get MCS15 support from EHT operation params and add it in link_conf
so that driver can use this value to know if EHT-MCS 15 reception
is enabled.
Co-developed-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Mohan Kumar G <quic_mkumarg@quicinc.com>
Link: https://patch.msgid.link/20250505152836.3266829-1-quic_mkumarg@quicinc.com
[remove pointless !! for bool assignment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When processing a PREQ the code would always check whether we have a
mesh path locally and reply accordingly. However, when forwarding is
disabled then we should not reply with this information as we will not
forward data packets down that path.
Move the check for dot11MeshForwarding up in the function and skip the
mesh path lookup in that case. In the else block, set forward to false
so that the rest of the function becomes a no-op and the
dot11MeshForwarding check does not need to be duplicated.
This explains an effect observed in the Freifunk community where mesh
forwarding is disabled. In that case a mesh with three STAs and only bad
links in between them, individual STAs would occionally have indirect
mpath entries. This should not have happened.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Reviewed-by: Rouven Czerwinski <rouven@czerwinskis.de>
Link: https://patch.msgid.link/20250430191042.3287004-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Older drivers and drivers with lower queue counts often have a static
array of queues, rather than allocating structs for each queue on demand.
Add a helper for adding up qstats from a queue range. Expectation is
that driver will pass a queue range [netdev->real_num_*x_queues, MAX).
It was tempting to always use num_*x_queues as the end, but virtio
seems to clamp its queue count after allocating the netdev. And this
way we can trivaly reuse the helper for [0, real_..).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250507003221.823267-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When bpf_redirect_peer is used to redirect packets to a device in
another network namespace, the skb isn't scrubbed. That can lead skb
information from one namespace to be "misused" in another namespace.
As one example, this is causing Cilium to drop traffic when using
bpf_redirect_peer to redirect packets that just went through IPsec
decryption to a container namespace. The following pwru trace shows (1)
the packet path from the host's XFRM layer to the container's XFRM
layer where it's dropped and (2) the number of active skb extensions at
each function.
NETNS MARK IFACE TUPLE FUNC
4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 xfrm_rcv_cb
.active_extensions = (__u8)2,
4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 xfrm4_rcv_cb
.active_extensions = (__u8)2,
4026533547 d00 eth0 10.244.3.124:35473->10.244.2.158:53 gro_cells_receive
.active_extensions = (__u8)2,
[...]
4026533547 0 eth0 10.244.3.124:35473->10.244.2.158:53 skb_do_redirect
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 ip_rcv
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 ip_rcv_core
.active_extensions = (__u8)2,
[...]
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 udp_queue_rcv_one_skb
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 __xfrm_policy_check
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 __xfrm_decode_session
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 security_xfrm_decode_session
.active_extensions = (__u8)2,
4026534999 0 eth0 10.244.3.124:35473->10.244.2.158:53 kfree_skb_reason(SKB_DROP_REASON_XFRM_POLICY)
.active_extensions = (__u8)2,
In this case, there are no XFRM policies in the container's network
namespace so the drop is unexpected. When we decrypt the IPsec packet,
the XFRM state used for decryption is set in the skb extensions. This
information is preserved across the netns switch. When we reach the
XFRM policy check in the container's netns, __xfrm_policy_check drops
the packet with LINUX_MIB_XFRMINNOPOLS because a (container-side) XFRM
policy can't be found that matches the (host-side) XFRM state used for
decryption.
This patch fixes this by scrubbing the packet when using
bpf_redirect_peer, as is done on typical netns switches via veth
devices except skb->mark and skb->tstamp are not zeroed.
Fixes: 9aa1206e8f ("bpf: Add redirect_peer helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/1728ead5e0fe45e7a6542c36bd4e3ca07a73b7d6.1746460653.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Jwld
-----END PGP SIGNATURE-----
Merge tag 'nf-25-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contain Netfilter/IPVS fixes for net:
1) Fix KMSAN uninit-value in do_output_route4, reported by syzbot.
Patch from Julian Anastasov.
2) ipset hashtable set type breaks up the hashtable into regions of
2^10 buckets. Fix the macro that determines the hashtable lock
region to protect concurrent updates. From Jozsef Kadlecsik.
* tag 'nf-25-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: fix region locking in hash types
ipvs: fix uninit-value for saddr in do_output_route4
====================
Link: https://patch.msgid.link/20250507221952.86505-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch replaces the manual Netlink attribute iteration in
output_userspace() with nla_for_each_nested(), which ensures that only
well-formed attributes are processed.
Fixes: ccb1352e76 ("net: Add Open vSwitch kernel components.")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/0bd65949df61591d9171c0dc13e42cea8941da10.1746541734.git.echaudro@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Region locking introduced in v5.6-rc4 contained three macros to handle
the region locks: ahash_bucket_start(), ahash_bucket_end() which gave
back the start and end hash bucket values belonging to a given region
lock and ahash_region() which should give back the region lock belonging
to a given hash bucket. The latter was incorrect which can lead to a
race condition between the garbage collector and adding new elements
when a hash type of set is defined with timeouts.
Fixes: f66ee0410b ("netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports")
Reported-by: Kota Toda <kota.toda@gmo-cybersecurity.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* iwlwifi: add two missing device entries
* cfg80211: fix a potential out-of-bounds access
* mac80211: fix format of TID to link mapping action frames
-----BEGIN PGP SIGNATURE-----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=Bzvu
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of fixes:
* iwlwifi: add two missing device entries
* cfg80211: fix a potential out-of-bounds access
* mac80211: fix format of TID to link mapping action frames
* tag 'wireless-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: add support for Killer on MTL
wifi: mac80211: fix the type of status_code for negotiated TID to Link Mapping
wifi: cfg80211: fix out-of-bounds access during multi-link element defragmentation
====================
Link: https://patch.msgid.link/20250506203506.158818-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* stack
- free SKBTX_WIFI_STATUS flag
- fixes for VLAN multicast in multi-link
- improve codel parameters (revert some old twiddling)
* ath12k
- Enable AHB support for IPQ5332.
- Add monitor interface support to QCN9274.
- Add MLO support to WCN7850.
- Add 802.11d scan offload support to WCN7850.
* ath11k
- Restore hibernation support
* iwlwifi
- EMLSR on two 5 GHz links
* mwifiex
- cleanups/refactoring
along with many other small features/cleanups
-----BEGIN PGP SIGNATURE-----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=s9mS
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
wireless features, notably
* stack
- free SKBTX_WIFI_STATUS flag
- fixes for VLAN multicast in multi-link
- improve codel parameters (revert some old twiddling)
* ath12k
- Enable AHB support for IPQ5332.
- Add monitor interface support to QCN9274.
- Add MLO support to WCN7850.
- Add 802.11d scan offload support to WCN7850.
* ath11k
- Restore hibernation support
* iwlwifi
- EMLSR on two 5 GHz links
* mwifiex
- cleanups/refactoring
along with many other small features/cleanups
* tag 'wireless-next-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (177 commits)
Revert "wifi: iwlwifi: clean up config macro"
wifi: iwlwifi: move phy_filters to fw_runtime
wifi: iwlwifi: pcie: make sure to lock rxq->read
wifi: iwlwifi: add definitions for iwl_mac_power_cmd version 2
wifi: iwlwifi: clean up config macro
wifi: iwlwifi: mld: simplify iwl_mld_rx_fill_status()
wifi: iwlwifi: mld: rx: simplify channel handling
wifi: iwlwifi: clean up band in RX metadata
wifi: iwlwifi: mld: skip unknown FW channel load values
wifi: iwlwifi: define API for external FSEQ images
wifi: iwlwifi: mld: allow EMLSR on separated 5 GHz subbands
wifi: iwlwifi: mld: use cfg80211_chandef_get_width()
wifi: iwlwifi: mld: fix iwl_mld_emlsr_disallowed_with_link() return
wifi: iwlwifi: mld: clarify variable type
wifi: iwlwifi: pcie: add support for the reset handshake in MSI
wifi: mac80211_hwsim: Prevent tsf from setting if beacon is disabled
wifi: mac80211: restructure tx profile retrieval for MLO MBSSID
wifi: nl80211: add link id of transmitted profile for MLO MBSSID
wifi: ieee80211: Add helpers to fetch EMLSR delay and timeout values
wifi: mac80211: update ML STA with EML capabilities
...
====================
Link: https://patch.msgid.link/20250506174656.119970-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmgaFN8THG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnOZVB/0SLNCKblGAISuevXuFKlXAFXcW2oxN
4g38M6PzZ4zS+XWTHeGYn5XoKuwCTT/9vkD55ADLy4Xo0JDI/4sHxh6y0h9ROGL8
wbyzSTmhiIAA5JftudvrA51Ac1pD2RWU8O6tb8xg0/+wFX0H/U7k9mZnttZBArgM
NnsLGZEjAJdeqKZkcXR1GTveK9aE3Hntpz5dacMO92yMWYts5DMpyc99itfSEa0G
M8HGWI7G9blBgw1BeCIpjnbfdQluitg2B9sbnJlzVZ9+iIHCnoykXo4HpnglksfW
DTYQmbNVhVh0hUQVf9L4eOEgq/gH0cU5RwoMtsaiQjpUTuNHtHDtbE0U
=5sTX
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.15-20250506' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-05-06
The first patch is by Antonios Salios and adds a missing
spin_lock_init() to the m_can driver.
The next 3 patches are by me and fix the unregistration order in the
mcp251xfd, rockchip_canfd and m_can driver.
The last patch is by Oliver Hartkopp and fixes RCU and BH
locking/handling in the CAN gw protocol.
* tag 'linux-can-fixes-for-6.15-20250506' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: gw: fix RCU/BH usage in cgw_create_job()
can: mcan: m_can_class_unregister(): fix order of unregistration calls
can: rockchip_canfd: rkcanfd_remove(): fix order of unregistration calls
can: mcp251xfd: mcp251xfd_remove(): fix order of unregistration calls
can: mcp251xfd: fix TDC setting for low data bit rates
can: m_can: m_can_class_allocate_dev(): initialize spin lock on device probe
====================
Link: https://patch.msgid.link/20250506135939.652543-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Accidentally spotted while trying to understand what else needs
to be renamed to netif_ prefix. Most of the calls to dev_set_promiscuity
are adjacent to dev_set_allmulti or dev_disable_lro so it should
be safe to add the lock. Note that new netif_set_promiscuity is
currently unused, the locked paths call __dev_set_promiscuity directly.
Fixes: ad7c7b2172 ("net: hold netdev instance lock during sysfs operations")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250506011919.2882313-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__qdisc_destroy() calls into various qdiscs .destroy() op, which in turn
can call .ndo_setup_tc(), which requires the netdev instance lock.
This commit extends the critical section in
unregister_netdevice_many_notify() to cover dev_shutdown() (and
dev_tcx_uninstall() as a side-effect) and acquires the netdev instance
lock in __dev_change_net_namespace() for the other dev_shutdown() call.
This should now guarantee that for all qdisc ops, the netdev instance
lock is held during .ndo_setup_tc().
Fixes: a0527ee2df ("net: hold netdev instance lock during qdisc ndo_setup_tc")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250505194713.1723399-1-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use newly introduced DEVLINK_VAR_ATTR_TYPE_* enum values instead of
internal NLA_* in fmsg health reporter code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250505114513.53370-5-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Assign DEVLINK_PARAM_TYPE_* enum values to DEVLINK_VAR_ATTR_TYPE_* to
ensure the same values are used internally and in UAPI. Benefit from
that by removing the value translations.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250505114513.53370-4-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devlink param and health reporter fmsg use attributes with dynamic type
which is determined according to a different type. Currently used values
are NLA_*. The problem is, they are not part of UAPI. They may change
which would cause a break.
To make this future safe, introduce a enum that shadows NLA_* values in
it and is part of UAPI.
Also, this allows to possibly carry types that are unrelated to NLA_*
values.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250505114513.53370-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The status code should be type of __le16.
Fixes: 83e897a961 ("wifi: ieee80211: add definitions for negotiated TID to Link map")
Fixes: 8f500fbc6c ("wifi: mac80211: process and save negotiated TID to Link mapping request")
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20250505081946.3927214-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently during the multi-link element defragmentation process, the
multi-link element length added to the total IEs length when calculating
the length of remaining IEs after the multi-link element in
cfg80211_defrag_mle(). This could lead to out-of-bounds access if the
multi-link element or its corresponding fragment elements are the last
elements in the IEs buffer.
To address this issue, correctly calculate the remaining IEs length by
deducting the multi-link element end offset from total IEs end offset.
Cc: stable@vger.kernel.org
Fixes: 2481b5da9c ("wifi: cfg80211: handle BSS data contained in ML probe responses")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20250424-fix_mle_defragmentation_oob_access-v1-1-84412a1743fa@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As reported by Sebastian Andrzej Siewior the use of local_bh_disable()
is only feasible in uni processor systems to update the modification rules.
The usual use-case to update the modification rules is to update the data
of the modifications but not the modification types (AND/OR/XOR/SET) or
the checksum functions itself.
To omit additional memory allocations to maintain fast modification
switching times, the modification description space is doubled at gw-job
creation time so that only the reference to the active modification
description is changed under rcu protection.
Rename cgw_job::mod to cf_mod and make it a RCU pointer. Allocate in
cgw_create_job() and free it together with cgw_job in
cgw_job_free_rcu(). Update all users to dereference cgw_job::cf_mod with
a RCU accessor and if possible once.
[bigeasy: Replace mod1/mod2 from the Oliver's original patch with dynamic
allocation, use RCU annotation and accessor]
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Closes: https://lore.kernel.org/linux-can/20231031112349.y0aLoBrz@linutronix.de/
Fixes: dd895d7f21 ("can: cangw: introduce optional uid to reference created routing jobs")
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250429070555.cs-7b_eZ@linutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-----BEGIN PGP SIGNATURE-----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=TxSF
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Apparently, nf_conntrack_bridge changes the way in which fragments
are handled, dealing to packet drop. From Huajian Yang.
2) Add a selftest to stress the conntrack subsystem, from Florian Westphal.
3) nft_quota depletion is off-by-one byte, Zhongqiu Duan.
4) Rewrites the procfs to read the conntrack table to speed it up,
from Florian Westphal.
5) Two patches to prevent overflow in nft_pipapo lookup table and to
clamp the maximum bucket size.
6) Update nft_fib selftest to check for loopback packet bypass.
From Florian Westphal.
netfilter pull request 25-05-06
* tag 'nf-next-25-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
selftests: netfilter: nft_fib.sh: check lo packets bypass fib lookup
netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX
netfilter: nft_set_pipapo: prevent overflow in lookup table allocation
netfilter: nf_conntrack: speed up reads from nf_conntrack proc file
netfilter: nft_quota: match correctly when the quota just depleted
selftests: netfilter: add conntrack stress test
netfilter: bridge: Move specific fragmented packet to slow_path instead of dropping it
====================
Link: https://patch.msgid.link/20250505234151.228057-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use of strcpy is decpreated, replaces the use of strcpy with strscpy as
recommended.
strscpy was chosen as it requires a NUL terminated non-padded string,
which is the case here.
I am aware there is an explicit bounds check above the second instance,
however using strscpy protects against buffer overflows in any future
code, and there is no good reason I can see to not use it.
I have also replaced the scrscpy above that had 3 params with the
version using 2 params. These are functionally equivalent, but it is
cleaner to have both using 2 params.
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250501202935.46318-1-rubenru09@aol.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use addrconf_addr_gen() to generate IPv6 link-local addresses on GRE
devices in most cases and fall back to using add_v4_addrs() only in
case the GRE configuration is incompatible with addrconf_addr_gen().
GRE used to use addrconf_addr_gen() until commit e5dd729460 ("ip/ip6_gre:
use the same logic as SIT interfaces when computing v6LL address")
restricted this use to gretap and ip6gretap devices, and created
add_v4_addrs() (borrowed from SIT) for non-Ethernet GRE ones.
The original problem came when commit 9af28511be ("addrconf: refuse
isatap eui64 for INADDR_ANY") made __ipv6_isatap_ifid() fail when its
addr parameter was 0. The commit says that this would create an invalid
address, however, I couldn't find any RFC saying that the generated
interface identifier would be wrong. Anyway, since gre over IPv4
devices pass their local tunnel address to __ipv6_isatap_ifid(), that
commit broke their IPv6 link-local address generation when the local
address was unspecified.
Then commit e5dd729460 ("ip/ip6_gre: use the same logic as SIT
interfaces when computing v6LL address") tried to fix that case by
defining add_v4_addrs() and calling it to generate the IPv6 link-local
address instead of using addrconf_addr_gen() (apart for gretap and
ip6gretap devices, which would still use the regular
addrconf_addr_gen(), since they have a MAC address).
That broke several use cases because add_v4_addrs() isn't properly
integrated into the rest of IPv6 Neighbor Discovery code. Several of
these shortcomings have been fixed over time, but add_v4_addrs()
remains broken on several aspects. In particular, it doesn't send any
Router Sollicitations, so the SLAAC process doesn't start until the
interface receives a Router Advertisement. Also, add_v4_addrs() mostly
ignores the address generation mode of the interface
(/proc/sys/net/ipv6/conf/*/addr_gen_mode), thus breaking the
IN6_ADDR_GEN_MODE_RANDOM and IN6_ADDR_GEN_MODE_STABLE_PRIVACY cases.
Fix the situation by using add_v4_addrs() only in the specific scenario
where the normal method would fail. That is, for interfaces that have
all of the following characteristics:
* run over IPv4,
* transport IP packets directly, not Ethernet (that is, not gretap
interfaces),
* tunnel endpoint is INADDR_ANY (that is, 0),
* device address generation mode is EUI64.
In all other cases, revert back to the regular addrconf_addr_gen().
Also, remove the special case for ip6gre interfaces in add_v4_addrs(),
since ip6gre devices now always use addrconf_addr_gen() instead.
Note:
This patch was originally applied as commit 183185a18f ("gre: Fix
IPv6 link-local address generation."). However, it was then reverted
by commit fc486c2d06 ("Revert "gre: Fix IPv6 link-local address
generation."") because it uncovered another bug that ended up
breaking net/forwarding/ip6gre_custom_multipath_hash.sh. That other
bug has now been fixed by commit 4d0ab3a688 ("ipv6: Start path
selection from the first nexthop"). Therefore we can now revive this
GRE patch (no changes since original commit 183185a18f ("gre: Fix
IPv6 link-local address generation.").
Fixes: e5dd729460 ("ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/a88cc5c4811af36007645d610c95102dccb360a6.1746225214.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have an infrastructure in ethnl for perphy DUMPs, we can get
rid of the custom ->doit and ->dumpit to deal with PHY listing commands.
As most of the code was custom, this basically means re-writing how we
deal with PHY listing.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250502085242.248645-3-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethnl commands that target a phy_device need a DUMP implementation that
will fill the reply for every PHY behind a netdev. We therefore need to
iterate over the dev->topo to list them.
When multiple PHYs are behind the same netdev, it's also useful to
perform DUMP with a filter on a given netdev, to get the capability of
every PHY.
Implement dedicated genl ->start(), ->dumpit() and ->done() operations
for PHY-targetting command, allowing filtered dumps and using a dump
context that keep track of the PHY iteration for multi-message dump.
PSE-PD and PLCA are converted to this new set of ops along the way.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250502085242.248645-2-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_assoc_del_peer() last use was removed in 2015 by
commit 73e6742027 ("sctp: Do not try to search for the transport twice")
which now uses rm_peer instead of del_peer.
sctp_chunk_iif() last use was removed in 2016 by
commit 1f45f78f8e ("sctp: allow GSO frags to access the chunk too")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250501233815.99832-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The last use of __strp_unpause() was removed in 2022 by
commit 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250501002402.308843-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alan reported a NULL pointer dereference in htb_next_rb_node()
after we made htb_qlen_notify() idempotent.
It turns out in the following case it introduced some regression:
htb_dequeue_tree():
|-> fq_codel_dequeue()
|-> qdisc_tree_reduce_backlog()
|-> htb_qlen_notify()
|-> htb_deactivate()
|-> htb_next_rb_node()
|-> htb_deactivate()
For htb_next_rb_node(), after calling the 1st htb_deactivate(), the
clprio[prio]->ptr could be already set to NULL, which means
htb_next_rb_node() is vulnerable here.
For htb_deactivate(), although we checked qlen before calling it, in
case of qlen==0 after qdisc_tree_reduce_backlog(), we may call it again
which triggers the warning inside.
To fix the issues here, we need to:
1) Make htb_deactivate() idempotent, that is, simply return if we
already call it before.
2) Make htb_next_rb_node() safe against ptr==NULL.
Many thanks to Alan for testing and for the reproducer.
Fixes: 5ba8b837b5 ("sch_htb: make htb_qlen_notify() idempotent")
Reported-by: Alan J. Wylie <alan@wylie.me.uk>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250428232955.1740419-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaBVftAAKCRAraS+Z+3y5
EzJ7AP9dtYuBHmU0tB5upuLzQ9sVxaCXs2linfRKK40A5YJDcgD/fBQqPzhxCqZR
moHEqelMLgrAUcyro5egdRJZPcaTfQE=
=6Las
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-05-02
We've added 14 non-merge commits during the last 10 day(s) which contain
a total of 13 files changed, 740 insertions(+), 121 deletions(-).
The main changes are:
1) Avoid skipping or repeating a sk when using a UDP bpf_iter,
from Jordan Rife.
2) Fixed a crash when a bpf qdisc is set in
the net.core.default_qdisc, from Amery Hung.
3) A few other fixes in the bpf qdisc, from Amery Hung.
- Always call qdisc_watchdog_init() in the .init prologue such that
the .reset/.destroy epilogue can always call qdisc_watchdog_cancel()
without issue.
- bpf_qdisc_init_prologue() was incorrectly returning an error
when the bpf qdisc is set as the default_qdisc and the mq is creating
the default_qdisc. It is now fixed.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Cleanup bpf qdisc selftests
selftests/bpf: Test attaching a bpf qdisc with incomplete operators
bpf: net_sched: Make some Qdisc_ops ops mandatory
selftests/bpf: Test setting and creating bpf qdisc as default qdisc
bpf: net_sched: Fix bpf qdisc init prologue when set as default qdisc
selftests/bpf: Add tests for bucket resume logic in UDP socket iterators
selftests/bpf: Return socket cookies from sock_iter_batch progs
bpf: udp: Avoid socket skips and repeats during iteration
bpf: udp: Use bpf_udp_iter_batch_item for bpf_udp_iter_state batch items
bpf: udp: Get rid of st_bucket_done
bpf: udp: Make sure iter->batch always contains a full bucket snapshot
bpf: udp: Make mem flags configurable through bpf_iter_udp_realloc_batch
bpf: net_sched: Fix using bpf qdisc as default qdisc
selftests/bpf: Fix compilation errors
====================
Link: https://patch.msgid.link/20250503010755.4030524-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Otherwise, it is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof()
when resizing hashtable because __GFP_NOWARN is unset.
Similar to:
b541ba7d1f ("netfilter: conntrack: clamp maximum hashtable size to INT_MAX")
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When calculating the lookup table size, ensure the following
multiplication does not overflow:
- desc->field_len[] maximum value is U8_MAX multiplied by
NFT_PIPAPO_GROUPS_PER_BYTE(f) that can be 2, worst case.
- NFT_PIPAPO_BUCKETS(f->bb) is 2^8, worst case.
- sizeof(unsigned long), from sizeof(*f->lt), lt in
struct nft_pipapo_field.
Then, use check_mul_overflow() to multiply by bucket size and then use
check_add_overflow() to the alignment for avx2 (if needed). Finally, add
lt_size_check_overflow() helper and use it to consolidate this.
While at it, replace leftover allocation using the GFP_KERNEL to
GFP_KERNEL_ACCOUNT for consistency, in pipapo_resize().
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Dumping all conntrack entries via proc interface can take hours due to
linear search to skip entries dumped so far in each cycle.
Apply same strategy used to speed up ipvs proc reading done in
commit 178883fd03 ("ipvs: speed up reads from ip_vs_conn proc file")
to nf_conntrack.
Note that the ctnetlink interface doesn't suffer from this problem, but
many scripts depend on the nf_conntrack proc interface.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The xt_quota compares skb length with remaining quota, but the nft_quota
compares it with consumed bytes.
The xt_quota can match consumed bytes up to quota at maximum. But the
nft_quota break match when consumed bytes equal to quota.
i.e., nft_quota match consumed bytes in [0, quota - 1], not [0, quota].
Fixes: 795595f68d ("netfilter: nft_quota: dump consumed quota")
Signed-off-by: Zhongqiu Duan <dzq.aishenghu0@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The config NF_CONNTRACK_BRIDGE will change the bridge forwarding for
fragmented packets.
The original bridge does not know that it is a fragmented packet and
forwards it directly, after NF_CONNTRACK_BRIDGE is enabled, function
nf_br_ip_fragment and br_ip6_fragment will check the headroom.
In original br_forward, insufficient headroom of skb may indeed exist,
but there's still a way to save the skb in the device driver after
dev_queue_xmit.So droping the skb will change the original bridge
forwarding in some cases.
Fixes: 3c171f496e ("netfilter: bridge: add connection tracking system")
Signed-off-by: Huajian Yang <huajianyang@asrmicro.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 32607a332c ("ipv4: prefer multipath nexthop that matches source
address") changed IPv4 nexthop selection to prefer a nexthop whose
nexthop device is assigned the specified source address for locally
generated traffic.
While the selection honors the "fib_multipath_use_neigh" sysctl and will
not choose a nexthop with an invalid neighbour, it does not honor the
"ignore_routes_with_linkdown" sysctl and can choose a nexthop without a
carrier:
$ sysctl net.ipv4.conf.all.ignore_routes_with_linkdown
net.ipv4.conf.all.ignore_routes_with_linkdown = 1
$ ip route show 198.51.100.0/24
198.51.100.0/24
nexthop via 192.0.2.2 dev dummy1 weight 1
nexthop via 192.0.2.18 dev dummy2 weight 1 dead linkdown
$ ip route get 198.51.100.1 from 192.0.2.17
198.51.100.1 from 192.0.2.17 via 192.0.2.18 dev dummy2 uid 0
Solve this by skipping over nexthops whose assigned hash upper bound is
minus one, which is the value assigned to nexthops that do not have a
carrier when the "ignore_routes_with_linkdown" sysctl is set.
In practice, this probably does not matter a lot as the initial route
lookup for the source address would not choose a nexthop that does not
have a carrier in the first place, but the change does make the code
clearer.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ever since commit f5f80e32de ("ipv6: remove hard coded limitation on
ipv6_pinfo") that protocols stopped using the old "obj_size -
sizeof(struct ipv6_pinfo)" way of grabbing ipv6_pinfo, that severely
restricted struct layout and caused fun, hard to see issues.
However, mptcp_inet6_sk wasn't fixed (unlike tcp_inet6_sk). Do so.
The non-cloned sockets already do the right thing using
ipv6_pinfo_offset + the generic IPv6 code.
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250430154541.1038561-1-pfalcato@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The patch makes all currently supported Qdisc_ops (i.e., .enqueue,
.dequeue, .init, .reset, and .destroy) mandatory.
Make .init, .reset and .destroy mandatory as bpf qdisc relies on prologue
and epilogue to check attach points and correctly initialize/cleanup
resources. The prologue/epilogue will only be generated for an struct_ops
operator only if users implement the operator.
Make .enqueue and .dequeue mandatory as bpf qdisc infra does not provide
a default data path.
Fixes: c824034495 ("bpf: net_sched: Support implementation of Qdisc_ops in bpf")
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Allow .init to proceed if qdisc_lookup() returns NULL as it only happens
when called by qdisc_create_dflt() in mq/mqprio_init and the parent qdisc
has not been added to qdisc_hash yet. In qdisc_create(), the caller,
__tc_modify_qdisc(), would have made sure the parent qdisc already exist.
In addition, call qdisc_watchdog_init() whether .init succeeds or not to
prevent null-pointer dereference. In qdisc_create() and
qdisc_create_dflt(), if .init fails, .destroy will be called. As a
result, the destroy epilogue could call qdisc_watchdog_cancel() with an
uninitialized timer, causing null-pointer deference in hrtimer_cancel().
Fixes: c824034495 ("bpf: net_sched: Support implementation of Qdisc_ops in bpf")
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Replace the offset-based approach for tracking progress through a bucket
in the UDP table with one based on socket cookies. Remember the cookies
of unprocessed sockets from the last batch and use this list to
pick up where we left off or, in the case that the next socket
disappears between reads, find the first socket after that point that
still exists in the bucket and resume from there.
This approach guarantees that all sockets that existed when iteration
began and continue to exist throughout will be visited exactly once.
Sockets that are added to the table during iteration may or may not be
seen, but if they are they will be seen exactly once.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Prepare for the next patch that tracks cookies between iterations by
converting struct sock **batch to union bpf_udp_iter_batch_item *batch
inside struct bpf_udp_iter_state.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Get rid of the st_bucket_done field to simplify UDP iterator state and
logic. Before, st_bucket_done could be false if bpf_iter_udp_batch
returned a partial batch; however, with the last patch ("bpf: udp: Make
sure iter->batch always contains a full bucket snapshot"),
st_bucket_done == true is equivalent to iter->cur_sk == iter->end_sk.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Require that iter->batch always contains a full bucket snapshot. This
invariant is important to avoid skipping or repeating sockets during
iteration when combined with the next few patches. Before, there were
two cases where a call to bpf_iter_udp_batch may only capture part of a
bucket:
1. When bpf_iter_udp_realloc_batch() returns -ENOMEM [1].
2. When more sockets are added to the bucket while calling
bpf_iter_udp_realloc_batch(), making the updated batch size
insufficient [2].
In cases where the batch size only covers part of a bucket, it is
possible to forget which sockets were already visited, especially if we
have to process a bucket in more than two batches. This forces us to
choose between repeating or skipping sockets, so don't allow this:
1. Stop iteration and propagate -ENOMEM up to userspace if reallocation
fails instead of continuing with a partial batch.
2. Try bpf_iter_udp_realloc_batch() with GFP_USER just as before, but if
we still aren't able to capture the full bucket, call
bpf_iter_udp_realloc_batch() again while holding the bucket lock to
guarantee the bucket does not change. On the second attempt use
GFP_NOWAIT since we hold onto the spin lock.
Introduce the udp_portaddr_for_each_entry_from macro and use it instead
of udp_portaddr_for_each_entry to make it possible to continue iteration
from an arbitrary socket. This is required for this patch in the
GFP_NOWAIT case to allow us to fill the rest of a batch starting from
the middle of a bucket and the later patch which skips sockets that were
already seen.
Testing all scenarios directly is a bit difficult, but I did some manual
testing to exercise the code paths where GFP_NOWAIT is used and where
ERR_PTR(err) is returned. I used the realloc test case included later
in this series to trigger a scenario where a realloc happens inside
bpf_iter_udp_batch and made a small code tweak to force the first
realloc attempt to allocate a too-small batch, thus requiring
another attempt with GFP_NOWAIT. Some printks showed both reallocs with
the tests passing:
Apr 25 23:16:24 crow kernel: go again GFP_USER
Apr 25 23:16:24 crow kernel: go again GFP_NOWAIT
With this setup, I also forced each of the bpf_iter_udp_realloc_batch
calls to return -ENOMEM to ensure that iteration ends and that the
read() in userspace fails.
[1]: https://lore.kernel.org/bpf/CABi4-ogUtMrH8-NVB6W8Xg_F_KDLq=yy-yu-tKr2udXE2Mu1Lg@mail.gmail.com/
[2]: https://lore.kernel.org/bpf/7ed28273-a716-4638-912d-f86f965e54bb@linux.dev/
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Prepare for the next patch which needs to be able to choose either
GFP_USER or GFP_NOWAIT for calls to bpf_iter_udp_realloc_batch.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
