There are three remaining footbridge boards, as the CO285 and the HP
personal server got removed already over the years.
Russell still uses his ebsa285, while both Linus and Marc have a NetWinder
that they use for testing. Nobody so far replied that they are using cats,
so it goes on the long list of machines to be removed in early 2023 if
it stays like this.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Linus Walleij <linusw@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The mmp platform supports both ATAGS based board files and DT
booting, but it appears that nobody has been interested in
board files for a long time.
Mark all of them for removal in early 2023 with a dependency
on CONFIG_UNUSED_BOARD_FILES, leaving only the DT support
for the future, unless someone pops up who uses them.
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the remaining ARM board files in the kernel have no known users,
and we plan to remove those in early 2023.
For ep93xx, Alexander Sverdlin still has access to the edb93xx family
of reference boards, while Nikita Shubin has a ts7250 and is working on
a device tree conversion for those. Hartley Sweeten has a
MACH_VISION_EP9307 that is still in use.
This is a total of nine machine definitions that we will keep
around, but these are all similar machines and are defined in only
two board files. The other six board files now have a dependency on
CONFIG_UNUSED_BOARD_FILES to indicate that they are likely going away.
Cc: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
From an earlier discussion, it appears that the davinci da8xx machines
that are still functional have already been converted to DT, while the
remaining board files are only kept because nobody has stepped up to
remove them.
Mark all these boards as 'depends on UNUSED_BOARD_FILES' with the
plan to remove them in early 2023 after the next longterm supported
kernel is out.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the remaining arm board files in the kernel are unused and will be
removed in early 2023 if no users step up. So far I got no user replies
about the orion5x and mv78xx0 machines, but these are still supported
in the default kernel of the Debian 'armel' (armv5 softfloat) distro,
and there is an active project on github that tries to keep some of
these machines working, and Mauri Sandberg is working on a DT conversion
for the D-Link DNS-323.
It appears the Debian-on-Buffalo project has not got the Terastation WXL
working in a few years, and the other mv78xx0 machines are just the
reference designs, so I assume none of these have remaining users.
For the Orion5x family, the same is probably true for its reference
implementations (RD88Fxxxxx, DB88F281) and the machines with less than
64MB of memory (WNR854T, WRT350N v2).
The remaining nine machines are now scheduled to be kept for at least
2023, hopefully to be replaced with DT based versions.
The mv78xx0_defconfig file needs to enable CONFIG_UNUSED_BOARD_FILES
to still build, while the other affected defconfig files lose the
specific boards.
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Mauri Sandberg <maukka@ext.kapsi.fi>
Link: https://github.com/1000001101000/Debian_on_Buffalo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the traditional board files are no longer used by anyone and
will be removed next year, while the DT based machine support remains.
Adding a CONFIG_ATAGS dependency around all the board files means
that they now actaully get disabled when ATAGS support is left out,
and the individual boards that have no known users are marked
as depending on CONFIG_UNUSED_BOARD_FILES, with the plan to remove
them in early 2023 unless someone else shows interest.
Laurence de Bruxelles intends to work on converting the Spitz/Akita/Borzoi
family of Sharp Zaurus SL machines to DT, to make that easier those
remain for the moment.
In addition, the "Gumstix" machine is the one that is supported in
qemu with 256MB of RAM, which makes it particularly nice for testing,
I'm leaving it in hoping that someone can take care of converting it to
DT as well.
Finally, Marc Zyngier is still able to test the Zeus and Viper machines,
so these could be saved as well if anyone wants to conver them to DT.
This seems less likely, so I'm marking them as unused for the time being.
For the defconfig files, both the pxa3xx_defconfig and pxa_defconfig
now only enable the boards that are not marked as unused, while all the
other ones explicitly enable CONFIG_UNUSED_BOARD_FILES to still allow
building the kernels.
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Laurence de Bruxelles <lfdebrux@gmail.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Based on the recent mailing list discussion, most board file support
has no remaining users and can be scheduled for removal early next
year.
If a board is still found to have users, it will remain for this round
but users are encouraged to migrate to devicetree based booting where
possible.
The timing is meant to ensure the next longterm supported kernel
still contains all the board files, giving another year of support
for potential users that did not speak up and would otherwise be
stuck on the v5.15.y longterm kernel from 2021.
Link: https://lore.kernel.org/all/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/
Link: https://docs.google.com/spreadsheets/d/1PL4dUUSieeXHzZhAn_Rnix32OTiCfN33sCQejpvI6ng/edit#gid=0
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are a total of eight platforms that only suppor ATAGS based boot
with board files but no devicetree booting.
For dove, the DT support is part of the mvebu platform, which shares
driver but no code in arch/arm.
Most of these will never get converted to DT, and the majority of the
board files appear to be entirely unused already. There are still known
users on a few machines, and there may be interest in converting some
omap1, ep93xx or footbridge machines over in the future.
For the moment, just add a Kconfig dependency to hide these platforms
completely when CONFIG_ATAGS is disabled, and reorder the priority
of the options: Rather than offering to turn ATAGS off for platforms
that have DT support, make it a top-level setting that determines
which platforms are visible.
The s3c24xx platform supports one machine with DT support, but it
cannot be built without also including ATAGS support, and the
entire platform is scheduled for removal, so leaving the entire
platform behind a dependency seems good enough.
All defconfig files should keep working, as the option remains default
enabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_LEDS was replaced by CONFIG_NEW_LEDS over ten years ago with commit
fa8bbb13ab ("ARM: use new LEDS CPU trigger stub to replace old one"),
but some defconfig files still reference it.
Replace it and its sub-options with the corresponding new versions.
Some of these machines may not actually have a new-style LED driver,
and I did not check them individually as most of the machines are
going away soon anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 1515b186c2 ("ARM: make configuration of userspace
Thumb support an expert option"), CONFIG_THUMB cannot be disabled
unless one turns on CONFIG_EXPERT first.
This is probably for the better, so remove the statements that
turn it off.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the
explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT,
DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5.
This was actually not what I had in mind when I suggested making
it a 'choice' statement, but it's too late to change again now,
and the Kconfig logic is more sensible in the new form.
Change any defconfig file that had CONFIG_DEBUG_INFO enabled
but did not pick DWARF4 or DWARF5 explicitly to now pick the toolchain
default.
Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The default is always 0x0 after commit 39c3e30456 ("ARM: 8984/1:
Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0"), so any
defconfig file that has these two lines can now drop them to reduce
the diff against the 'make savedefconfig' version.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A couple of ARM defconfig files (and one for sh) still refer to the
IRDA options that were removed in linux-4.14. Remove the entries
as well now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A lot of Kconfig options have changed over the years, and we tend
to not do a blind 'make defconfig' to refresh the files, to ensure
we catch options that should not have gone away.
I used some a bit of scripting to only rework the bits where an
option moved around in any of the defconfig files, without also
dropping any of the other lines, to make it clearer which options
we no longer have.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables a few of the core drivers needed to boot the 8cx Gen 3
platform and demotes the Qualcomm USB PHY drivers to modules, as they
don't need to be builtin.
-----BEGIN PGP SIGNATURE-----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=KJ5v
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CCqT
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig more updates for v5.20
This enables a few of the core drivers needed to boot the 8cx Gen 3
platform and demotes the Qualcomm USB PHY drivers to modules, as they
don't need to be builtin.
* tag 'qcom-arm64-defconfig-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Demote Qualcomm USB PHYs to modules
arm64: defconfig: Enable Qualcomm SC8280XP providers
Link: https://lore.kernel.org/r/20220720230140.2113129-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm USB PHYs are not critical for reaching the ramdisk to load
modules, so they can be demoted to be built as such instead of builtin.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220712031821.4134712-1-bjorn.andersson@linaro.org
The Qualcomm SC8280XP need the global clock controller, interconnect
provider and TLMM pinctrl in order to boot. Enable these as builtin, as
they are needed in order to provide e.g. UART.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220707161014.3178798-1-bjorn.andersson@linaro.org
This enables the drivers for the Light Pulse Generator and Bandwidth
Monitor hardware, found in a wide variety of Qualcomm PMICs and SoCs.
It enables interconnect providers for MSM8996, QCS404 and SC7180 and it
enables the USB PHYs for the QCS404 platform.
-----BEGIN PGP SIGNATURE-----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=DyUm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=/elF
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig updates for v5.20
This enables the drivers for the Light Pulse Generator and Bandwidth
Monitor hardware, found in a wide variety of Qualcomm PMICs and SoCs.
It enables interconnect providers for MSM8996, QCS404 and SC7180 and it
enables the USB PHYs for the QCS404 platform.
* tag 'qcom-arm64-defconfig-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable Qualcomm Bandwidth Monitor
arm64: defconfig: Enable qcom interconnect drivers
arm64: defconfig: Enable qcom ss & hs usb phy
arm64: defconfig: enable Qualcomm LPG leds driver
Link: https://lore.kernel.org/r/20220712031812.1275182-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.10, please pull the following:
- Nicolas enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
to load the proper GPU module driver
- William enables the newly introduced CONFIG_ARCH_BCMBCA 64-bit ARM
counterpart to support the newly added BCA SocS
-----BEGIN PGP SIGNATURE-----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=QpXj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=oVJK
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM64-based SoCs defconfig changes
for 5.10, please pull the following:
- Nicolas enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
to load the proper GPU module driver
- William enables the newly introduced CONFIG_ARCH_BCMBCA 64-bit ARM
counterpart to support the newly added BCA SocS
* tag 'arm-soc/for-5.20/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Enable DRM_V3D
arm64: defconfig: enable bcmbca soc support
Link: https://lore.kernel.org/r/20220711164451.3542127-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
pull the following:
- Peter enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
to load the proper GPU module driver
- William updates the multi_v7_defconfig to replace the enabling of
CONFIG_ARCH_BCM_63XX with CONFIG_ARCH_BCMBCA which is how this platform
is now supported
-----BEGIN PGP SIGNATURE-----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=NP7q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=EGHr
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.20/defconfig' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains ARM SoCs defconfig changes for 5.20, please
pull the following:
- Peter enables CONFIG_DRM_V3D in order for the Raspberry Pi 4 systems
to load the proper GPU module driver
- William updates the multi_v7_defconfig to replace the enabling of
CONFIG_ARCH_BCM_63XX with CONFIG_ARCH_BCMBCA which is how this platform
is now supported
* tag 'arm-soc/for-5.20/defconfig' of https://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: Update configs for BCM63138
ARM: configs: Enable DRM_V3D
Link: https://lore.kernel.org/r/20220711164451.3542127-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the Qualcomm Bandwidth Monitor to allow scaling interconnects
depending on bandwidth usage between CPU and memory. This is used
already on Qualcomm SDM845 SoC.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220704121730.127925-4-krzysztof.kozlowski@linaro.org
Allwinner provide an audio CODEC as part of their SoCs which is used on a
number of designs, enable the driver as part of defconfig in order to
improve coverage of this in the various automated testing systems.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220701112213.1765599-1-broonie@kernel.org
While enabling QCS404 interconnect driver, I found that other drivers
are missing too, so add all the interconnect driver
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220628045454.621175-2-vkoul@kernel.org
These phys are used for USB controller found in QCS404 board, so enable
them in the defconfig
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220628045454.621175-1-vkoul@kernel.org
Enable gpio-fan support as this is needed by phyBOARD-Polis-i.MX8M Mini.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A number of fixes have accumulated, but they are largely for
harmless issues:
- Several OF node leak fixes
- A fix to the Exynos7885 UART clock description
- DTS fixes to prevent boot failures on TI AM64 and J721s2
- Bus probe error handling fixes for Baikal-T1
- A fixup to the way STM32 SoCs use separate dts files for
different firmware stacks
- Multiple code fixes for Arm SCMI firmware, all dealing with
robustness of the implementation
- Multiple NXP i.MX devicetree fixes, addressing incorrect
data in DT nodes
- Three updates to the MAINTAINERS file, including Florian
Fainelli taking over BCM283x/BCM2711 (Raspberry Pi)
from Nicolas Saenz Julienne
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmK4yEMACgkQmmx57+YA
GNlSIQ/+NY4ViA4IoBrpi1OWmW/1OW10MpI7EqCwh30np6swp5Oub01LncwC++b8
Fc1zHX99teDj0xU3/zuwtwFZtQ9ZyEQ2vABvZRjh1ONthmpS13se2XZHDynt1/bT
0LWUM/PQ8/9sHf0JWxUNH466qIP1I5MVxy0iTaTlUKOdk+cwq3fZ4oYEgWkpQIq5
jtAMmg9Nsn21iTD2RyTC7/pNuJakPqo7YZ9lvxbRyLwg8a9ewJsszJg6ZUuoeeH+
tJNrPuVesl2pohYE+R2EYdzMbf0blTgmydZtYGbCGeJTlZ015Y/IPxdAgjSKeHe8
/n6hfolyiIyhc5El/88pYeaXPZi/3jzbJ9QEhwCdcgP8bcGCRPs/I8CuWccXWmUK
tI7KTFfyNOYs3vL0Gd2/TGJm8NEe8hh2uUePQ9ssXoM0hukJEd3rAHEVR0xz7HwO
wBzlutOORv3MLdAWOVG6jniE8OFAop2pqNp/IlZ/MiXwu5WvJX2w7DwbYj0a4R00
A6DJqz8OJovMuN1XhT59NiaVwojM2zh1YoYEtfqppiw6AjTDHDxujdEKC+DOCtBo
iQgHjH5+Xn3bWm2lXvBgcsjP+ivxjjhsMjhZ1fmN/RFcm7OQyG82S6Bs00keVzOD
kcdYkW9WfLkLzFh3+H5uXQgSz4K7ox1TvTfCAupBCn8C5WFrFNY=
=Js9H
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A number of fixes have accumulated, but they are largely for harmless
issues:
- Several OF node leak fixes
- A fix to the Exynos7885 UART clock description
- DTS fixes to prevent boot failures on TI AM64 and J721s2
- Bus probe error handling fixes for Baikal-T1
- A fixup to the way STM32 SoCs use separate dts files for different
firmware stacks
- Multiple code fixes for Arm SCMI firmware, all dealing with
robustness of the implementation
- Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
nodes
- Three updates to the MAINTAINERS file, including Florian Fainelli
taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
Julienne"
* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
arm: mach-spear: Add missing of_node_put() in time.c
ARM: cns3xxx: Fix refcount leak in cns3xxx_init
MAINTAINERS: Update email address
arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
ARM: dts: bcm2711-rpi-400: Fix GPIO line names
bus: bt1-axi: Don't print error on -EPROBE_DEFER
bus: bt1-apb: Don't print error on -EPROBE_DEFER
ARM: Fix refcount leak in axxia_boot_secondary
ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
ARM: dts: imx6qdl: correct PU regulator ramp delay
firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
MAINTAINERS: Update BCM2711/BCM2835 maintainer
...
Three important fixes:
- enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000 machines
- flush all mappings of a shared anonymous page on PA8800/8900 machines via
flushing the whole data cache. This may slow down such machines but
makes sure that the cache is consistent
- Fix duplicate definition build error regarding fb_is_primary_device()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYrht4AAKCRD3ErUQojoP
Xz02AQCATPX+1w1GiAVO+d61X1XaehPaDQnZnpwPYK5N06GLEQEA/HT1PVD1mvyv
secS+8PDsSHLMPfE3WD7hYKwiK73igM=
=glnu
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000
machines
- flush all mappings of a shared anonymous page on PA8800/8900 machines
via flushing the whole data cache. This may slow down such machines
but makes sure that the cache is consistent
- Fix duplicate definition build error regarding fb_is_primary_device()
* tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
parisc: Fix flush_anon_page on PA8800/PA8900
parisc: align '*' in comment in math-emu code
parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI
- fix OF reference leaks in xtensa arch code
- replace '.bss' with '.section .bss' to fix entry.S build with old
assembler
-----BEGIN PGP SIGNATURE-----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=Xd/h
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20220626' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa fixes from Max Filippov:
- fix OF reference leaks in xtensa arch code
- replace '.bss' with '.section .bss' to fix entry.S build with old
assembler
* tag 'xtensa-20220626' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: change '.bss' to '.section .bss'
xtensa: xtfpga: Fix refcount leak bug in setup
xtensa: Fix refcount leak bug in time.c
- A fix for a CMA change that broke booting guests with > 2G RAM on Power8 hosts.
- Fix the RTAS call filter to allow a special case that applications rely on.
- A change to our execve path, to make the execve syscall exit tracepoint work.
- Three fixes to wire up our various RNGs earlier in boot so they're available for use in
the initial seeding in random_init().
- A build fix for when KASAN is enabled along with STRUCTLEAK_BYREF_ALL.
Thanks to: Andrew Donnellan, Aneesh Kumar K.V, Christophe Leroy, Jason A. Donenfeld,
Nathan Lynch, Naveen N. Rao, Sathvika Vasireddy, Sumit Dubey2, Tyrel Datwyler, Zi Yan.
-----BEGIN PGP SIGNATURE-----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=n88O
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for a CMA change that broke booting guests with > 2G RAM on
Power8 hosts.
- Fix the RTAS call filter to allow a special case that applications
rely on.
- A change to our execve path, to make the execve syscall exit
tracepoint work.
- Three fixes to wire up our various RNGs earlier in boot so they're
available for use in the initial seeding in random_init().
- A build fix for when KASAN is enabled along with
STRUCTLEAK_BYREF_ALL.
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Christophe Leroy, Jason
Donenfeld, Nathan Lynch, Naveen N. Rao, Sathvika Vasireddy, Sumit
Dubey2, Tyrel Datwyler, and Zi Yan.
* tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: wire up rng during setup_arch
powerpc/prom_init: Fix build failure with GCC_PLUGIN_STRUCTLEAK_BYREF_ALL and KASAN
powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address
powerpc: Enable execve syscall exit tracepoint
powerpc/pseries: wire up rng during setup_arch()
powerpc/microwatt: wire up rng during setup_arch()
powerpc/mm: Move CMA reservations after initmem_init()
Fix a boot crash on a c8000 machine as reported by Dave. Basically it changes
patch_map() to return an alias mapping to the to-be-patched code in order to
prevent writing to write-protected memory.
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.2+
Link: https://lore.kernel.org/all/e8ec39e8-25f8-e6b4-b7ed-4cb23efc756e@bell.net/
Anonymous pages are allocated with the shared mappings colouring,
SHM_COLOUR. Since the alias boundary on machines with PA8800 and
PA8900 processors is unknown, flush_user_cache_page() might not
flush all mappings of a shared anonymous page. Flushing the whole
data cache flushes all mappings.
This won't fix all coherency issues with shared mappings but it
seems to work well in practice. I haven't seen any random memory
faults in almost a month on a rp3440 running as a debian buildd
machine.
There is a small preformance hit.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.18+
compute_return_era() always returns 0, make it return void,
and then no need to check its return value for its callers.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
According to the configuration information accessible by the CPUCFG
instruction in LoongArch Reference Manual [1], FP_ver is stored in
bit [5: 3] of CPUCFG2, the current code to get fpu version is wrong,
use CPUCFG2_FPVERS to fix it.
[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html
Fixes: 628c3bb40e ("LoongArch: Add boot and setup routines")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
setup_tlb_handler() is expected to set per-cpu exception handlers, but
it only set the TLBRENTRY successfully because of copy & paste errors,
so fix it.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
_stext means the start of .text section (see __is_kernel_text()), but we
put its definition in .ref.text by mistake. Fix it by defining it in the
vmlinux.lds.S.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Fix the !THP build by making pmd_pfn() available in all configurations.
Because pmd_pfn() is used in mm/page_vma_mapped.c whether or not THP is
configured.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
* A fix to the T-Head memory type errata workaround that avoids behavior
that is unsupported in the LLVM assembler.
-----BEGIN PGP SIGNATURE-----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=QEm2
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
- fix the T-Head memory type errata workaround to avoid behavior
that is unsupported in the LLVM assembler
* tag 'riscv-for-linus-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix ALT_THEAD_PMA's asm parameters
- Fix perf stat accounting for cryptography counters when multiple
events are installed concurrently.
- Prevent installation of unsupported perf events for cryptography
counters.
- Treat perf events cpum_cf/CPU_CYCLES/ and cpu_cf/INSTRUCTIONS/
identical to basic events CPU_CYCLES" and INSTRUCTIONS, since
they address the same hardware.
- Restore kcrash operation which was broken by commit 5d8de293c2
("vmcore: convert copy_oldmem_page() to take an iov_iter").
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCYrWI9xccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8LriAP4vRkb3oGFWk0Wbc3grZB0Fz0q+
uHQDVYdx6r1PSjBwRQD/XONnDjVYHBofwALENyuPLuc7vByyY3iyZst/Q97t8AA=
=1Roa
-----END PGP SIGNATURE-----
Merge tag 's390-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix perf stat accounting for cryptography counters when multiple
events are installed concurrently.
- Prevent installation of unsupported perf events for cryptography
counters.
- Treat perf events cpum_cf/CPU_CYCLES/ and cpu_cf/INSTRUCTIONS/
identical to basic events CPU_CYCLES" and INSTRUCTIONS, since they
address the same hardware.
- Restore kcrash operation which was broken by commit 5d8de293c2
("vmcore: convert copy_oldmem_page() to take an iov_iter").
* tag 's390-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pai: Fix multiple concurrent event installation
s390/pai: Prevent invalid event number for pai_crypto PMU
s390/cpumf: Handle events cycles and instructions identical
s390/crash: make copy_oldmem_page() return number of bytes copied
s390/crash: add missing iterator advance in copy_oldmem_page()
* Fix a regression with pKVM when kmemleak is enabled
* Add Oliver Upton as an official KVM/arm64 reviewer
selftests:
* deal with compiler optimizations around hypervisor exits
x86:
* MAINTAINERS reorganization
* Two SEV fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmK1cjIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMayQf+JOOggLacjPPa/t/CE8kIcbX0IWc+
epEdq/f0qgxJlAjUB9YKgMr2Io9jPScyTdY8t6uS0WyZ7Q1NyAogXfds/dF4wElm
IMWWfLTSU3gzCmzPh8n6SfbWtRGJKsOukK0cDIIh86h5YnXDmeyVjJrDvEVQOnzG
TjHOKYuFXGPj8/NKwcrxqBFHK9DBNxn9b/UBRArG+5AZM0mx3Jl8LJMYUDEIyAyO
yhNfTh7gPPidEiJLkFDyHWKg5rhO3fbn8UrncY+eTmSBqMHvvY0+eka6urwihN0v
ExmKqy00ES51c/6r+zqsqYICqVSqiaNNWF4lp1HTp7LrUBtxyZAqnkBbHQ==
=U2ol
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix a regression with pKVM when kmemleak is enabled
- Add Oliver Upton as an official KVM/arm64 reviewer
selftests:
- deal with compiler optimizations around hypervisor exits
x86:
- MAINTAINERS reorganization
- Two SEV fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV: Init target VMCBs in sev_migrate_from
KVM: x86/svm: add __GFP_ACCOUNT to __sev_dbg_{en,de}crypt_user()
MAINTAINERS: Reorganize KVM/x86 maintainership
selftests: KVM: Handle compiler optimizations in ucall
KVM: arm64: Add Oliver as a reviewer
KVM: arm64: Prevent kmemleak from accessing pKVM memory
tools/kvm_stat: fix display of error when multiple processes are found
Both fixes are for issues present before v5.19 merge window:
1. Correct UART clocks on Exynos7885. Although the initial, fixed
DTS commit is from v5.18, the issue will be exposed with a upcoming fix
to Exynos7885 clock driver, so we need to correct the DTS earlier.
2. Fix theoretical OF node leak in Exynos machine code.
-----BEGIN PGP SIGNATURE-----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=gDkB
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=h/OV
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Samsung fixes for v5.19
Both fixes are for issues present before v5.19 merge window:
1. Correct UART clocks on Exynos7885. Although the initial, fixed
DTS commit is from v5.18, the issue will be exposed with a upcoming fix
to Exynos7885 clock driver, so we need to correct the DTS earlier.
2. Fix theoretical OF node leak in Exynos machine code.
* tag 'samsung-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos: Fix refcount leak in exynos_map_pmu
arm64: dts: exynos: Correct UART clocks on Exynos7885
Link: https://lore.kernel.org/r/20220624080423.31427-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>