[ Upstream commit a7e255ff9f ]
The S2110 has an additional set of media playback control keys enabled
by a hardware toggle button that switches the keys between "Application"
and "Player" modes. Toggling "Player" mode just shifts the scancode of
each hotkey up by 4.
Add defines for new scancodes, and a keymap and dmi id for the S2110.
Tested on a Fujitsu Lifebook S2110.
Signed-off-by: Valtteri Koskivuori <vkoskiv@gmail.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/20250509184251.713003-1-vkoskiv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a032f29a15 ]
Change get_thinkpad_model_data() to check for additional vendor name
"NEC" in order to support NEC Lavie X1475JAS notebook (and perhaps
more).
The reason of this works with minimal changes is because NEC Lavie
X1475JAS is a Thinkpad inside. ACPI dumps reveals its OEM ID to be
"LENOVO", BIOS version "R2PET30W" matches typical Lenovo BIOS version,
the existence of HKEY of LEN0268, with DMI fw string is "R2PHT24W".
I compiled and tested with my own machine, attached the dmesg
below as proof of work:
[ 6.288932] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 6.288937] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.288938] thinkpad_acpi: ThinkPad BIOS R2PET30W (1.11 ), EC R2PHT24W
[ 6.307000] thinkpad_acpi: radio switch found; radios are enabled
[ 6.307030] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 6.307033] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 6.320322] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 6.371963] thinkpad_acpi: secondary fan control detected & enabled
[ 6.391922] thinkpad_acpi: battery 1 registered (start 0, stop 85, behaviours: 0x7)
[ 6.398375] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input13
Signed-off-by: John Chau <johnchau@0atlas.com>
Link: https://lore.kernel.org/r/20250504165513.295135-1-johnchau@0atlas.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8508427a6e ]
A few, quite rare, WMI attributes have names that are not compatible with
filenames, e.g. "Intel VT for Directed I/O (VT-d)".
For these cases the '/' gets replaced with '\' for display, but doesn't
get switched again when doing the WMI access.
Fix this by keeping the original attribute name and using that for sending
commands to the BIOS
Fixes: a40cd7ef22 ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250520005027.3840705-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4e89a40774 upstream.
If the 'buf' array received from the user contains an empty string, the
'length' variable will be zero. Accessing the 'buf' array element with
index 'length - 1' will result in a buffer overflow.
Add a check for an empty string.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: stable@vger.kernel.org
Signed-off-by: Vladimir Moskovkin <Vladimir.Moskovkin@kaspersky.com>
Link: https://lore.kernel.org/r/39973642a4f24295b4a8fad9109c5b08@kaspersky.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 02c6e43397 ]
Add entries to unsupported WMI codes in ideapad_keymap[] and one
check for WMI code 0x13d to trigger platform_profile_cycle().
Signed-off-by: Gašper Nemgar <gasper.nemgar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250418070738.7171-1-gasper.nemgar@gmail.com
[ij: joined nested if ()s & major tweaks to changelog]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77bdac7375 ]
ASUS firmware resets OOBE state during S4 suspend, so the keyboard
blinks during resume from hibernation. This patch disables OOBE state
after resume from hibernation.
Signed-off-by: Pavel Nikulin <pavel@noa-labs.com>
Link: https://lore.kernel.org/r/20250418140706.1691-1-pavel@noa-labs.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12df9ec3e1 ]
Add Pantherlake ACPI device ID to the Intel HID driver.
While there, clean up the device ID table to remove the ", 0" parts.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250421041332.830136-1-saranya.gopal@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfcfe6d335 ]
The wlan_ctrl_by_user detection was introduced by commit a50bd128f2
("asus-wmi: record wlan status while controlled by userapp").
Quoting from that commit's commit message:
"""
When you call WMIMethod(DSTS, 0x00010011) to get WLAN status, it may return
(1) 0x00050001 (On)
(2) 0x00050000 (Off)
(3) 0x00030001 (On)
(4) 0x00030000 (Off)
(5) 0x00000002 (Unknown)
(1), (2) means that the model has hardware GPIO for WLAN, you can call
WMIMethod(DEVS, 0x00010011, 1 or 0) to turn WLAN on/off.
(3), (4) means that the model doesn’t have hardware GPIO, you need to use
API or driver library to turn WLAN on/off, and call
WMIMethod(DEVS, 0x00010012, 1 or 0) to set WLAN LED status.
After you set WLAN LED status, you can see the WLAN status is changed with
WMIMethod(DSTS, 0x00010011). Because the status is recorded lastly
(ex: Windows), you can use it for synchronization.
(5) means that the model doesn’t have WLAN device.
WLAN is the ONLY special case with upper rule.
"""
The wlan_ctrl_by_user flag should be set on 0x0003000? ((3), (4) above)
return values, but the flag mistakenly also gets set on laptops with
0x0005000? ((1), (2)) return values. This is causing rfkill problems on
laptops where 0x0005000? is returned.
Fix the check to only set the wlan_ctrl_by_user flag for 0x0003000?
return values.
Fixes: a50bd128f2 ("asus-wmi: record wlan status while controlled by userapp")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219786
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250501131702.103360-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0887817e49 ]
MECHREVO Wujie 14XA (GX4HRXL) wakes up immediately after s2idle entry.
This happens regardless of whether the laptop is plugged into AC power,
or whether any peripheral is plugged into the laptop.
Similar to commit a55bdad5df ("platform/x86/amd/pmc: Disable keyboard
wakeup on AMD Framework 13"), the MECHREVO Wujie 14XA wakes up almost
instantly after s2idle suspend entry (IRQ1 is the keyboard):
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 9
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 1
Add this model to the spurious_8042 quirk to workaround this.
This patch does not affect the wake-up function of the built-in keyboard.
Because the firmware of this machine adds an insurance for keyboard
wake-up events, as it always triggers an additional IRQ 9 to wake up the
system.
Suggested-by: Mingcong Bai <jeffbai@aosc.io>
Suggested-by: Xinhui Yang <cyan@cyano.uk>
Suggested-by: Rong Zhang <i@rong.moe>
Fixes: a55bdad5df ("platform/x86/amd/pmc: Disable keyboard wakeup on AMD Framework 13")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4166
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://zhuanldan.zhihu.com/p/730538041
Tested-by: Yemu Lu <prcups@krgm.moe>
Signed-off-by: Runhua He <hua@aosc.io>
Link: https://lore.kernel.org/r/20250507100103.995395-1-hua@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e81b9cd6e ]
commit 376a8c2a14 ("platform/x86/amd/pmf: Update PMF Driver for
Compatibility with new PMF-TA") added support for platforms that support
an updated TA, however it also exposed a number of platforms that although
they have support for the updated TA don't actually populate a policy
binary.
Add an explicit check that the policy binary isn't empty before
initializing the TA.
Reported-by: Christian Heusel <christian@heusel.eu>
Closes: https://lore.kernel.org/platform-driver-x86/ae644428-5bf2-4b30-81ba-0b259ed3449b@heusel.eu/
Fixes: 376a8c2a14 ("platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Christian Heusel <christian@heusel.eu>
Link: https://lore.kernel.org/r/20250423132002.3984997-3-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 690d722e02 ]
If a policy is passed into amd_pmf_get_pb_data() that causes the engine
to fail to start there is a memory leak. Free the memory in this failure
path.
Fixes: 10817f28e5 ("platform/x86/amd/pmf: Add capability to sideload of policy binary")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250423132002.3984997-2-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8d6955ed76 upstream.
In certain situations, the sysfs for uncore may not be present when all
CPUs in a package are offlined and then brought back online after boot.
This issue can occur if there is an error in adding the sysfs entry due
to a memory allocation failure. Retrying to bring the CPUs online will
not resolve the issue, as the uncore_cpu_mask is already set for the
package before the failure condition occurs.
This issue does not occur if the failure happens during module
initialization, as the module will fail to load in the event of any
error.
To address this, ensure that the uncore_cpu_mask is not set until the
successful return of uncore_freq_add_entry().
Fixes: dbce412a77 ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Signed-off-by: Shouye Liu <shouyeliu@tencent.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250417032321.75580-1-shouyeliu@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f5595d5f0 upstream.
When an APU exits HW sleep with no active wake sources the Linux kernel will
rapidly assert that the APU can enter back into HW sleep. This happens in a
few ms. Contrasting this to Windows, Windows can take 10s of seconds to
enter back into the resiliency phase for Modern Standby.
For some situations this can be problematic because it can cause leakage
from VDDCR_SOC to VDD_MISC and force VDD_MISC outside of the electrical
design guide specifications. On some designs this will trip the over
voltage protection feature (OVP) of the voltage regulator module, but it
could cause APU damage as well.
To prevent this risk, add an explicit sleep call so that future attempts
to enter into HW sleep will have enough time to settle. This will occur
while the screen is dark and only on cases that the APU should enter HW
sleep again, so it shouldn't be noticeable to any user.
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250414162446.3853194-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit baf2f2c2b4 upstream.
The ACPI byte code inside the ACPI control method responsible for
handling the WMI method calls uses a global buffer for constructing
the return value, yet the ACPI control method itself is not marked
as "Serialized".
This means that calling WMI methods on this WMI device is not
thread-safe, as concurrent WMI method calls will corrupt the global
buffer.
Fix this by serializing the WMI method calls using a mutex.
Cc: stable@vger.kernel.org # 6.x.x: 912d614ac9: platform/x86: msi-wmi-platform: Rename "data" variable
Fixes: 9c0beb6b29 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 912d614ac9 upstream.
Rename the "data" variable inside msi_wmi_platform_read() to avoid
a name collision when the driver adds support for a state container
struct (that is to be called "data" too) in the future.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fcf27a6a92 upstream.
On some platforms it has been observed that STT limits are not being
applied properly causing poor performance as power limits are set too low.
STT limits that are sent to the platform are supposed to be in Q8.8
format. Convert them before sending.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Fixes: 7c45534afa ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Cc: stable@vger.kernel.org
Tested-by: Yijun Shen <Yijun_Shen@Dell.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250407181915.1482450-1-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c683c6887 upstream.
The value returned by acpi_evaluate_integer() is not checked,
but the result is not always successful, so it is necessary to
add a check of the returned value.
If the result remains negative during three iterations of the loop,
then the uninitialized variable 'val' will be used in the clamp_val()
macro, so it must be initialized with the current value of the 'curr'
variable.
In this case, the algorithm should be less noisy.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b23910c219 ("asus-laptop: Pegatron Lucid accelerometer")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Link: https://lore.kernel.org/r/20250403122603.18172-1-arefev@swemel.ru
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2c30357e75 ]
Commit c78dd25138 ("platform/x86: x86-android-tablets: Add Vexia EDU
ATLA 10 EC battery driver"), adds power_supply class registering to
the x86-android-tablets code.
Add "select POWER_SUPPLY" to the Kconfig entry to avoid these errors:
ERROR: modpost: "power_supply_get_drvdata" [drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.ko] undefined!
ERROR: modpost: "power_supply_changed" [drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.ko] undefined!
ERROR: modpost: "devm_power_supply_register" [drivers/platform/x86/x86-android-tablets/vexia_atla10_ec.ko] undefined!
When POWER_SUPPLY support is not enabled.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503231159.ga9eWMVO-lkp@intel.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250324125052.374369-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d83c45aeec ]
Load the cros_ec_lpc driver based on a Framework FRMWC004 ACPI device,
which mirrors GOOG0004, but also applies npcx quirks for Framework
systems.
Matching on ACPI will let us avoid having to change the SMBIOS match
rules again and again.
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: linux@frame.work
Cc: Dustin L. Howett <dustin@howett.net>
Signed-off-by: Daniel Schaefer <dhs@frame.work>
Link: https://lore.kernel.org/r/20250128181329.8070-1-dhs@frame.work
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5b1122fc49 upstream.
There are a few problems in this code:
First, if amd_pmf_tee_init() fails then the function returns directly
instead of cleaning up. We cannot simply do a "goto error;" because
the amd_pmf_tee_init() cleanup calls tee_shm_free(dev->fw_shm_pool);
and amd_pmf_tee_deinit() calls it as well leading to a double free.
I have re-written this code to use an unwind ladder to free the
allocations.
Second, if amd_pmf_start_policy_engine() fails on every iteration though
the loop then the code calls amd_pmf_tee_deinit() twice which is also a
double free. Call amd_pmf_tee_deinit() inside the loop for each failed
iteration. Also on that path the error codes are not necessarily
negative kernel error codes. Set the error code to -EINVAL.
There is a very subtle third bug which is that if the call to
input_register_device() in amd_pmf_register_input_device() fails then
we call input_unregister_device() on an input device that wasn't
registered. This will lead to a reference counting underflow
because of the device_del(&dev->dev) in __input_unregister_device().
It's unlikely that anyone would ever hit this bug in real life.
Fixes: 376a8c2a14 ("platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/232231fc-6a71-495e-971b-be2a76f6db4c@stanley.mountain
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9462e74c5c upstream.
After resume/online turbo limit ratio (TRL) is restored partially if
the admin explicitly changed TRL from user space.
A hash table is used to store SST mail box and MSR settings when modified
to restore those settings after resume or online. This uses a struct
isst_cmd field "data" to store these settings. This is a 64 bit field.
But isst_store_new_cmd() is only assigning as u32. This results in
truncation of 32 bits.
Change the argument to u64 from u32.
Fixes: f607874f35 ("platform/x86: ISST: Restore state on resume")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250328224749.2691272-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b9f84e7dc upstream.
T495, T495s, and E560 laptops have the FANG+FANW ACPI methods
(therefore fang_handle and fanw_handle are not NULL) but they do not
actually work, which results in a "No such device or address" error.
The DSDT table code for the FANG+FANW methods doesn't seem to do
anything special regarding the fan being secondary. The bug was
introduced in commit 57d0557dfa ("platform/x86: thinkpad_acpi: Add
Thinkpad Edge E531 fan support"), which added a new fan control method
via the FANG+FANW ACPI methods.
Add a quirk for T495, T495s, and E560 to avoid the FANG+FANW methods.
Fan access and control is restored after forcing the legacy non-ACPI
fan control method by setting both fang_handle and fanw_handle to NULL.
Reported-by: Vlastimil Holer <vlastimil.holer@gmail.com>
Fixes: 57d0557dfa ("platform/x86: thinkpad_acpi: Add Thinkpad Edge E531 fan support")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219643
Cc: stable@vger.kernel.org
Tested-by: Alireza Elikahi <scr0lll0ck1s4b0v3h0m3k3y@gmail.com>
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Eduard Christian Dumitrescu <eduard.c.dumitrescu@gmail.com>
Co-developed-by: Seyediman Seyedarab <ImanDevel@gmail.com>
Signed-off-by: Seyediman Seyedarab <ImanDevel@gmail.com>
Link: https://lore.kernel.org/r/20250324152442.106113-1-ImanDevel@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 376a8c2a14 ]
The PMF driver allocates a shared memory buffer using
tee_shm_alloc_kernel_buf() for communication with the PMF-TA.
The latest PMF-TA version introduces new structures with OEM debug
information and additional policy input conditions for evaluating the
policy binary. Consequently, the shared memory size must be increased to
ensure compatibility between the PMF driver and the updated PMF-TA.
To do so, introduce the new PMF-TA UUID and update the PMF shared memory
configuration to ensure compatibility with the latest PMF-TA version.
Additionally, export the TA UUID.
These updates will result in modifications to the prototypes of
amd_pmf_tee_init() and amd_pmf_ta_open_session().
Link: https://lore.kernel.org/all/55ac865f-b1c7-fa81-51c4-d211c7963e7e@linux.intel.com/
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305045842.4117767-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ba93cb821 ]
In the amd_pmf_invoke_cmd_init() function within the PMF driver ensure
that the actual result from the PMF-TA is returned rather than a generic
EIO. This change allows for proper handling of errors originating from the
PMF-TA.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250305045842.4117767-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f317f38e7f ]
Add PCI ID for the Diamond Rapids Platforms
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250226214728.1256747-1-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2738d06fb4 ]
Volume buttons on Microsoft Surface Go 4 tablet didn't send any events.
Add Surface Go 4 DMI match to button_array_table to fix this.
Signed-off-by: Dmitry Panchenko <dmitry@d-systems.ee>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250220154016.3620917-1-dmitry@d-systems.ee
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a248294a3 ]
On the Dell Inspiron 3505 the battery temperature is always
0.1 degrees larger than the temperature show inside the OEM
application.
Emulate this behaviour to avoid showing strange looking values
like 29.1 degrees.
Fixes: 0331b1b0ba ("platform/x86: dell-ddv: Fix temperature scaling")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250305053009.378609-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4878e0b14c ]
Sparse reports:
dell-uart-backlight.c:328:29: warning: symbol
'dell_uart_bl_serdev_driver' was not declared. Should it be static?
Fix it by making the symbol static.
Fixes: 484bae9e4d ("platform/x86: Add new Dell UART backlight driver")
Reviewed-by: Mario Limonciello <maroi.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250304160639.4295-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 886ca11a0c ]
Sparse reports:
lenovo-yoga-tab2-pro-1380-fastcharger.c:222:29: warning: symbol
'yt2_1380_fc_serdev_driver' was not declared. Should it be static?
Fix that by making the symbol static.
Fixes: b2ed33e8d4 ("platform/x86: Add lenovo-yoga-tab2-pro-1380-fastcharger driver")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250304160639.4295-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 569617dbbd ]
The DT bindings for ov7251 specify "enable" GPIO (xshutdown in
documentation) but the int3472 indiscriminately provides this as a "reset"
GPIO to sensor drivers. Take this into account by assigning it as "enable"
with active high polarity for INT347E devices, i.e. ov7251. "reset" with
active low polarity remains the default GPIO name for other devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250211072841.7713-3-sakari.ailus@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc22b06fbd ]
Struct gpiod_lookup flags field's type is unsigned long. Thus use unsigned
long for values to be assigned to that field. Similarly, also call the
field gpio_flags which it really is.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250211072841.7713-2-sakari.ailus@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cff907cbf ]
Newer Thinkpad AMD platforms are using V9 DYTC and this changes the
profiles used for PSC mode. Add support for this update.
Tested on P14s G5 AMD
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250206193953.58365-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1046cac109 ]
On ThinkPad X120e, fan speed is reported in ticks per revolution
rather than RPM.
Recalculate the fan speed value reported for ThinkPad X120e
to RPM based on a 22.5 kHz clock.
Based on the information on
https://www.thinkwiki.org/wiki/How_to_control_fan_speed,
the same problem is highly likely to be relevant to at least Edge11,
but Edge11 is not addressed in this patch.
Signed-off-by: Sybil Isabel Dorsett <sybdorsett@proton.me>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250203163255.5525-1-sybdorsett@proton.me
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 583ef25bb2 ]
In pmc_core_ltr_show(), promote 'val' to 'u64' to avoid possible integer
overflow. Values (10 bit) are multiplied by the scale, the result of
expression is in a range from 1 to 34,326,183,936 which is bigger then
UINT32_MAX. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250123220739.68087-1-d.kandybka@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d0d10eaedc upstream.
Based on the dmesg messages from the original reporter:
[ 4.964073] ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error
[ 4.964083] thinkpad_acpi: Error probing battery 2
Lenovo ThinkPad X131e also needs this battery quirk.
Reported-by: Fan Yang <804284660@qq.com>
Tested-by: Fan Yang <804284660@qq.com>
Co-developed-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250221164825.77315-1-jeffbai@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dd0f05b989 ]
CZ.NIC's Turris devices are based on Marvell EBU SoCs. Hence add a
dependency on ARCH_MVEBU, to prevent asking the user about these drivers
when configuring a kernel that cannot run on an affected CZ.NIC Turris
system.
Fixes: 992f1a3d4e ("platform: cznic: Add preliminary support for Turris Omnia MCU")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 478b00a623 upstream.
dell_uart_bl_pdev_probe() calls get_serdev_controller() with the
serial_ctrl_uid parameter set to NULL.
In case of errors this NULL parameter then gets passed to pr_err()
as argument matching a "%s" conversion specification. This leads to
compiler warnings when building with "make W=1".
Check serial_ctrl_uid before passing it to pr_err() to avoid these.
Fixes: dc5afd720f ("platform/x86: Add new get_serdev_controller() helper")
Cc: stable@vger.kernel.org
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241204204227.95757-4-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f6bfa25c66 ]
On the Acer Swift SFG14-41, the events 8 - 1 and 8 - 0 are printed on
AC connect/disconnect. Ignore those events to avoid spamming the
kernel log with error messages.
Reported-by: Farhan Anwar <farhan.anwar8@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/2ffb529d-e7c8-4026-a3b8-120c8e7afec8@gmail.com
Tested-by: Rayan Margham <rayanmargham4@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250119201723.11102-2-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 549fcf58cf ]
Add predator_v4 quirk for the Acer Nitro AN515-58 to enable fan speed
monitoring and platform_profile handling.
Signed-off-by: Hridesh MG <hridesh699@gmail.com>
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250113-platform_profile-v4-5-23be0dff19f1@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c85b516b44 ]
Add the Acer Predator PT16-72 to acer_quirks to provide support
for the turbo button and predator_v4 interfaces.
Tested-by: Eric Johnsten <ejohnsten@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250107175652.3171-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd2fd6eab4 ]
Not all devices have an ACPI companion fwnode, so adev might be NULL. This
can e.g. (theoretically) happen when a user manually binds one of
the int3472 drivers to another i2c/platform device through sysfs.
Add a check for adev not being set and return -ENODEV in that case to
avoid a possible NULL pointer deref in skl_int3472_get_acpi_buffer().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241209220522.25288-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc1ff7bc1b ]
Add Clearwater Forest (INTEL_ATOM_DARKMONT_X) to SST support list by
adding to isst_cpu_ids.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250103155255.1488139-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bee9a0838f ]
Add Clearwater Forest support (INTEL_ATOM_DARKMONT_X) to tpmi_cpu_ids
to support domaid id mappings.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250103155255.1488139-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59616a91e5 ]
The yt2_1380_fc_serdev_probe() function calls devm_serdev_device_open()
before setting the client ops via serdev_device_set_client_ops(). This
ordering can trigger a NULL pointer dereference in the serdev controller's
receive_buf handler, as it assumes serdev->ops is valid when
SERPORT_ACTIVE is set.
This is similar to the issue fixed in commit 5e700b384e
("platform/chrome: cros_ec_uart: properly fix race condition") where
devm_serdev_device_open() was called before fully initializing the
device.
Fix the race by ensuring client ops are set before enabling the port via
devm_serdev_device_open().
Note, serdev_device_set_baudrate() and serdev_device_set_flow_control()
calls should be after the devm_serdev_device_open() call.
Fixes: b2ed33e8d4 ("platform/x86: Add lenovo-yoga-tab2-pro-1380-fastcharger driver")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250111180951.2277757-1-chenyuan0y@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b2128aa2d ]
The dell_uart_bl_serdev_probe() function calls devm_serdev_device_open()
before setting the client ops via serdev_device_set_client_ops(). This
ordering can trigger a NULL pointer dereference in the serdev controller's
receive_buf handler, as it assumes serdev->ops is valid when
SERPORT_ACTIVE is set.
This is similar to the issue fixed in commit 5e700b384e
("platform/chrome: cros_ec_uart: properly fix race condition") where
devm_serdev_device_open() was called before fully initializing the
device.
Fix the race by ensuring client ops are set before enabling the port via
devm_serdev_device_open().
Note, serdev_device_set_baudrate() and serdev_device_set_flow_control()
calls should be after the devm_serdev_device_open() call.
Fixes: 484bae9e4d ("platform/x86: Add new Dell UART backlight driver")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250111180118.2274516-1-chenyuan0y@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d7461d0c8 ]
In pmc_core_ssram_get_pmc(), the physical addresses for hidden SSRAM
devices are retrieved from the MMIO region of the primary SSRAM device.
If additional devices are not present, the address returned is zero.
Currently, the code does not check for this condition, resulting in
ioremap() incorrectly attempting to map address 0.
Add a check for a zero address and return 0 if no additional devices
are found, as it is not an error for the device to be absent.
Fixes: a01486dc4b ("platform/x86/intel/pmc: Cleanup SSRAM discovery")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250106174653.1497128-1-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
