All Qualcomm firmwares uploaded to linux-firmware are in MBN format,
instead of split MDT. Firmware for boards here is not yet in
linux-firmware, but if it gets accepted it will be MBN, not MDT.
Change might affect users of DTS which rely on manually placed firmware
files, not coming from linux-firmware package.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250108120530.156928-1-krzysztof.kozlowski@linaro.org
[bjorn: Updated subject]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Don't error out on large MTU if XDP is multi-buf.
The ping test now tests ping with XDP and high MTU.
netdevsim doesn't actually run the prog (yet?) so
it doesn't matter if the prog was multi-buf..
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250311092820.542148-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow userspace to write the safe (NI) value for ID_AA64MMFR0_EL1.TGRAN*_2.
Disallow to change these fields for NV since kvm provides a sanitized view
for them based on the PAGE_SIZE.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/kvmarm/20250306184013.30008-1-sebott@redhat.com/
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Stanislav Fomichev says:
====================
net: remove rtnl_lock from the callers of queue APIs
All drivers that use queue management APIs already depend on the netdev
lock. Ultimately, we want to have most of the paths that work with
specific netdev to be rtnl_lock-free (ethtool mostly in particular).
Queue API currently has a much smaller API surface, so start with
rtnl_lock from it:
- add mutex to each dmabuf binding (to replace rtnl_lock)
- move netdev lock management to the callers of netdev_rx_queue_restart
and drop rtnl_lock
====================
Link: https://patch.msgid.link/20250311144026.4154277-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All drivers that use queue API are already converted to use
netdev instance lock. Move netdev instance lock management to
the netlink layer and drop rtnl_lock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry. <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As we move away from rtnl_lock for queue ops, introduce
per-netdev_nl_sock lock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No functional changes. Next patches will add more granular locking
to netdev_nl_sock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
for_each_possible_cpu() is currently used to initialize cpuidle
in below cpuidle drivers:
drivers/cpuidle/cpuidle-arm.c
drivers/cpuidle/cpuidle-big_little.c
drivers/cpuidle/cpuidle-psci.c
drivers/cpuidle/cpuidle-qcom-spm.c
drivers/cpuidle/cpuidle-riscv-sbi.c
However, in cpu_dev_register_generic(), for_each_present_cpu()
is used to register CPU devices which means the CPU devices are
only registered for present CPUs and not all possible CPUs.
With nosmp or maxcpus=0, only the boot CPU is present, lead
to the failure:
| Failed to register cpuidle device for cpu1
Then rollback to cancel all CPUs' cpuidle registration.
Change for_each_possible_cpu() to for_each_present_cpu() in the
above cpuidle drivers to ensure it only registers cpuidle devices
for CPUs that are actually present.
Fixes: b0c69e1214 ("drivers: base: Use present CPUs in GENERIC_CPU_DEVICES")
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250307145547.2784821-1-ping.bai@nxp.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pm_clk_remove() is currently unused.
It hasn't been used since at least 2011 when it was renamed from
pm_runtime_clk_remove() by commit 3d5c30367c ("PM: Rename clock
management functions")
Remove it.
Note that the __pm_clk_remove() is still used and is left in.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250307212347.68785-1-linux@treblig.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There's a race between initializing the governor and userspace accessing
the sysfs interface. From time to time the Intel graphics CI shows this
signature:
<1>[] #PF: error_code(0x0000) - not-present page
<6>[] PGD 0 P4D 0
<4>[] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
<4>[] CPU: 3 UID: 0 PID: 562 Comm: thermald Not tainted 6.14.0-rc4-CI_DRM_16208-g7e37396f86d8+ #1
<4>[] Hardware name: Intel Corporation Twin Lake Client Platform/AlderLake-N LP5 RVP, BIOS TWLNFWI1.R00.5222.A01.2405290634 05/29/2024
<4>[] RIP: 0010:policy_show+0x1a/0x40
thermald tries to read the policy file between the sysfs files being
created and the governor set by thermal_set_governor(), which causes the
NULL pointer dereference.
Similarly to the hwmon interface, delay exposing the sysfs files to when
the governor is already set.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13655
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20250307-thermal-sysfs-race-v1-1-8a3d4d4ac9c4@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Although it does not seem to have any untoward side-effects,
the use of ';' to separate to assignments seems more appropriate than ','.
Flagged by clang-19 -Wcomma
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250307-mlx5-comma-v1-1-934deb6927bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GCC has expanded support of the "nonstring" attribute so that it can be
applied to arrays of character arrays[1], which is needed to identify
correct static initialization of those kinds of objects. Since this was
not supported prior to GCC 15, we need to distinguish the usage of Linux's
existing __nonstring macro for the attribute for non-multi-dimensional
char arrays. Until GCC 15 is the minimum version, use __nonstring_array to
mark arrays of non-string character arrays. (Regular non-string character
arrays can continue to use __nonstring.) Once GCC 15 is the minimum
compiler version we can replace all uses of __nonstring_array with just
__nonstring and remove this macro.
This allows for changes like this:
-static const char table_sigs[][ACPI_NAMESEG_SIZE] __initconst = {
+static const char table_sigs[][ACPI_NAMESEG_SIZE] __nonstring_array __initconst = {
ACPI_SIG_BERT, ACPI_SIG_BGRT, ACPI_SIG_CPEP, ACPI_SIG_ECDT,
Which will silence the coming -Wunterminated-string-initialization
warnings in GCC 15:
In file included from ../include/acpi/actbl.h:371, from ../include/acpi/acpi.h:26, from ../include/linux/acpi.h:26,
from ../drivers/acpi/tables.c:19:
../include/acpi/actbl1.h:30:33: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (5 chars into 4 available) [-Wunterminated-string-initialization]
30 | #define ACPI_SIG_BERT "BERT" /* Boot Error Record Table */
| ^~~~~~ ../drivers/acpi/tables.c:400:9: note: in expansion of macro 'ACPI_SIG_BERT' 400 | ACPI_SIG_BERT, ACPI_SIG_BGRT, ACPI_SIG_CPEP, ACPI_SIG_ECDT,
| ^~~~~~~~~~~~~ ../include/acpi/actbl1.h:31:33: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (5 chars into 4 available) [-Wunterminated-string-initialization]
31 | #define ACPI_SIG_BGRT "BGRT" /* Boot Graphics Resource Table */
| ^~~~~~
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1]
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250310214244.work.194-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Commit 51bef03e1a ("selftests/net: deflake GRO tests") recently
switched to NAPI suspension, and lowered the timeout from 1ms to 100us.
This started causing flakes in netdev-run CI. Let's bump it to 200us.
In a quick test of a debug kernel I see failures with 100us, with 200us
in 5 runs I see 2 completely clean runs and 3 with a single retry
(GRO test will retry up to 5 times).
Reviewed-by: Kevin Krakauer <krakauer@google.com>
Link: https://patch.msgid.link/20250310110821.385621-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt_dl_reload_up is completely missing instance lock management
which can result in `devlink dev reload` leaving with instance
lock held. Add the missing calls.
Also add netdev_assert_locked to make it clear that the up() method
is running with the instance lock grabbed.
v2:
- add net/netdev_lock.h include to bnxt_devlink.c for netdev_assert_locked
Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_lock_ops conditionally grabs instance lock when queue_mgmt_ops
is defined. However queue_mgmt_ops support is signaled via FW
so we can sometimes boot without queue_mgmt_ops being set.
This will result in bnxt running without instance lock which
the driver now heavily depends on. Set request_ops_lock to true
unconditionally to always request netdev instance lock.
Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All (error) paths that call dev_close are already holding instance lock,
so switch to netif_close to avoid the deadlock.
v2:
- add missing EXPORT_MODULE for netif_close
Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The s2idle_lock must be held while checking for a pending wakeup and while
moving into S2IDLE_STATE_ENTER, to make sure a wakeup doesn't get lost.
Let's extend the comment in the code to make this clear.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250311160827.1129643-3-ulf.hansson@linaro.org
[ rjw: Rewrote the new comment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The calls to cpus_read_lock|unlock() protects us from getting CPUS
hotplugged, while entering suspend-to-idle. However, when s2idle_enter() is
called we should be far beyond the point when CPUs may be hotplugged.
Let's therefore simplify the code and drop the use of the lock.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250311160827.1129643-2-ulf.hansson@linaro.org
[ rjw: Rewrote the new comment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>4GB folio is possible on some ARCHs, such as aarch64, 16GB hugepage
is supported, then 'offset' of folio can't be held in 'unsigned int',
cause warning in bio_add_folio_nofail() and IO failure.
Fix it by adjusting 'page' & trimming 'offset' so that `->bi_offset` won't
be overflow, and folio can be added to bio successfully.
Fixes: ed9832bc08 ("block: introduce folio awareness and add a bigger size from folio")
Cc: Kundan Kumar <kundan.kumar@samsung.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Gavin Shan <gshan@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20250312145136.2891229-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pm_generic_thaw_early() has been unused since 2016's
commit 294f47ffd5 ("PM / Domains: Remove redundant system PM callbacks")
pm_generic_freeze_late() has been unused since 2019's
commit 3cd7957e85 ("ACPI: PM: Simplify and fix PM domain hibernation
callbacks")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250307021750.457600-1-linux@treblig.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a couple of places from which we can arrive to ndo_setup_tc
with TC_SETUP_BLOCK/TC_SETUP_FT:
- netlink
- netlink notifier
- netdev notifier
Locking netdev too deep in this call chain seems to be problematic
(especially assuming some/all of the call_netdevice_notifiers
NETDEV_UNREGISTER) might soon be running with the instance lock).
Revert to lockless ndo_setup_tc for TC_SETUP_BLOCK/TC_SETUP_FT. NFT
framework already takes care of most of the locking. Document
the assumptions.
ndo_setup_tc TC_SETUP_BLOCK
nft_block_offload_cmd
nft_chain_offload_cmd
nft_flow_block_chain
nft_flow_offload_chain
nft_flow_rule_offload_abort
nft_flow_rule_offload_commit
nft_flow_rule_offload_commit
nf_tables_commit
nfnetlink_rcv_batch
nfnetlink_rcv_skb_batch
nfnetlink_rcv
nft_offload_netdev_event
NETDEV_UNREGISTER notifier
ndo_setup_tc TC_SETUP_FT
nf_flow_table_offload_cmd
nf_flow_table_offload_setup
nft_unregister_flowtable_hook
nft_register_flowtable_net_hooks
nft_flowtable_update
nf_tables_newflowtable
nfnetlink_rcv_batch (.call NFNL_CB_BATCH)
nft_flowtable_update
nf_tables_newflowtable
nft_flowtable_event
nf_tables_flowtable_event
NETDEV_UNREGISTER notifier
__nft_unregister_flowtable_net_hooks
nft_unregister_flowtable_net_hooks
nf_tables_commit
nfnetlink_rcv_batch (.call NFNL_CB_BATCH)
__nf_tables_abort
nf_tables_abort
nfnetlink_rcv_batch
__nft_release_hook
__nft_release_hooks
nf_tables_pre_exit_net -> module unload
nft_rcv_nl_event
netlink_register_notifier (oh boy)
nft_register_flowtable_net_hooks
nft_flowtable_update
nf_tables_newflowtable
nf_tables_newflowtable
Fixes: c4f0f30b42 ("net: hold netdev instance lock during nft ndo_setup_tc")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reported-by: syzbot+0afb4bcf91e5a1afdcad@syzkaller.appspotmail.com
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250308044726.1193222-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nf_conntrack_max and nf_conntrack_expect_max sysctls were authorized to
be written any negative value, which would then be stored in the
unsigned int variables nf_conntrack_max and nf_ct_expect_max variables.
While the do_proc_dointvec_conv function is supposed to limit writing
handled by proc_dointvec proc_handler to INT_MAX. Such a negative value
being written in an unsigned int leads to a very high value, exceeding
this limit.
Moreover, the nf_conntrack_expect_max sysctl documentation specifies the
minimum value is 1.
The proc_handlers have thus been updated to proc_dointvec_minmax in
order to specify the following write bounds :
* Bound nf_conntrack_max sysctl writings between SYSCTL_ZERO
and SYSCTL_INT_MAX.
* Bound nf_conntrack_expect_max sysctl writings between SYSCTL_ONE
and SYSCTL_INT_MAX as defined in the sysctl documentation.
With this patch applied, sysctl writes outside the defined in the bound
will thus lead to a write error :
```
sysctl -w net.netfilter.nf_conntrack_expect_max=-1
sysctl: setting key "net.netfilter.nf_conntrack_expect_max": Invalid argument
```
Signed-off-by: Nicolas Bouchinet <nicolas.bouchinet@ssi.gouv.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cong Wang says:
====================
net_sched: Prevent creation of classes with TC_H_ROOT
This patchset contains a bug fix and its TDC test case.
====================
Link: https://patch.msgid.link/20250306232355.93864-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Integrate the reproduer from Mingi to TDC.
All test results:
1..4
ok 1 0385 - Create DRR with default setting
ok 2 2375 - Delete DRR with handle
ok 3 3092 - Show DRR class
ok 4 4009 - Reject creation of DRR class with classid TC_H_ROOT
Cc: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306232355.93864-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function qdisc_tree_reduce_backlog() uses TC_H_ROOT as a termination
condition when traversing up the qdisc tree to update parent backlog
counters. However, if a class is created with classid TC_H_ROOT, the
traversal terminates prematurely at this class instead of reaching the
actual root qdisc, causing parent statistics to be incorrectly maintained.
In case of DRR, this could lead to a crash as reported by Mingi Cho.
Prevent the creation of any Qdisc class with classid TC_H_ROOT
(0xFFFFFFFF) across all qdisc types, as suggested by Jamal.
Reported-by: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 066a3b5b23 ("[NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop")
Link: https://patch.msgid.link/20250306232355.93864-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GCC 15's -Wunterminated-string-initialization saw that "id" was not
including the required trailing NUL character. Instead of marking "id"
with __nonstring[1], expand the length of the string as it is used in
(debugging) format strings that expect a properly formed C string.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250310222432.work.826-kees@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pnp_remove_card() is currently unused, it has been since it was
added in 2003's BKrev: 3e6d3f19XSmESWEZnNEReEJOJW5SOw
pnp_unregister_protocol() is currently unused, it has been since
it was added in 2002's BKrev: 3df0cf6d4FVUKndhbfxjL7pksw5PGA
Remove them, and pnp_remove_card_device() and __pnp_remove_device()
which are now no longer used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250307214936.74504-1-linux@treblig.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
PRT BOs may not have any backing store, so bo->tbo.resource will be
NULL. Check for that before dereferencing.
Fixes: 0cce5f285d ("drm/amdkfd: Check correct memory types for is_system variable")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e3fcd29b5)
Cc: stable@vger.kernel.org # 6.12.x
[Why]
If reset is detected and kfd need to evict working queues, HWS moving queue will be failed.
Then remaining queues are not evicted and in active state.
After reset done, kfd uses HWS to termination remaining activated queues but HWS is resetted.
So remove queue will be failed again.
[How]
Keep removing all queues even if HWS returns failed.
It will not affect cpsch as it checks reset_domain->sem.
v2: If any queue failed, evict queue returns error.
v3: Declare err inside the if-block.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 42c854b8fb)
Cc: stable@vger.kernel.org
Use a meaningful constant explicitly instead of hard-coding a literal.
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://patch.msgid.link/20250312065937.1787241-1-matsuda-daisuke@fujitsu.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There is no difference between the sge of READ and non-READ
operations in hns RoCE. Set max_sge_rd to the same value as
max_send_sge.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-8-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When ib_copy_to_udata() fails in hns_roce_create_qp_common(),
hns_roce_qp_remove() should be called in the error path to
clean up resources in hns_roce_qp_store().
Fixes: 0f00571f94 ("RDMA/hns: Use new SQ doorbell register for HIP09")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
SQ params from userspace are checked in by set_user_sq_size(). But
when the check fails, the function doesn't return but instead keep
running and overwrite 'ret'. As a result, the invalid params will
not get blocked actually.
Add a return right after the failed check. Besides, although the
check result of kernel sq params will not be overwritten, to keep
coding style unified, move default_congest_type() before
set_kernel_sq_size().
Fixes: 6ec429d588 ("RDMA/hns: Support userspace configuring congestion control algorithm with QP granularity")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently the condition of unmapping sdb in error path is not exactly
the same as the condition of mapping in alloc_user_qp_db(). This may
cause a problem of unmapping an unmapped db in some case, such as
when the QP is XRC TGT. Unified the two conditions.
Fixes: 90ae0b57e4 ("RDMA/hns: Combine enable flags of qp")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Driver runs a for-loop when allocating bt pages and mapping them with
buffer pages. When a large buffer (e.g. MR over 100GB) is being allocated,
it may require a considerable loop count. This will lead to soft lockup:
watchdog: BUG: soft lockup - CPU#27 stuck for 22s!
...
Call trace:
hem_list_alloc_mid_bt+0x124/0x394 [hns_roce_hw_v2]
hns_roce_hem_list_request+0xf8/0x160 [hns_roce_hw_v2]
hns_roce_mtr_create+0x2e4/0x360 [hns_roce_hw_v2]
alloc_mr_pbl+0xd4/0x17c [hns_roce_hw_v2]
hns_roce_reg_user_mr+0xf8/0x190 [hns_roce_hw_v2]
ib_uverbs_reg_mr+0x118/0x290
watchdog: BUG: soft lockup - CPU#35 stuck for 23s!
...
Call trace:
hns_roce_hem_list_find_mtt+0x7c/0xb0 [hns_roce_hw_v2]
mtr_map_bufs+0xc4/0x204 [hns_roce_hw_v2]
hns_roce_mtr_create+0x31c/0x3c4 [hns_roce_hw_v2]
alloc_mr_pbl+0xb0/0x160 [hns_roce_hw_v2]
hns_roce_reg_user_mr+0x108/0x1c0 [hns_roce_hw_v2]
ib_uverbs_reg_mr+0x120/0x2bc
Add a cond_resched() to fix soft lockup during these loops. In order not
to affect the allocation performance of normal-size buffer, set the loop
count of a 100GB MR as the threshold to call cond_resched().
Fixes: 38389eaa4d ("RDMA/hns: Add mtr support for mixed multihop addressing")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250311084857.3803665-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The line
obj-$(INTEL_ISH_FIRMWARE_DOWNLOADER) += intel-ish-hid/
in top-level HID Makefile is both superfluous (as CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER
depends on CONFIG_INTEL_ISH_HID, which contains intel-ish-hid/ already) and wrong (as it's
missing the CONFIG_ prefix).
Just remove it.
Fixes: 91b228107d ("HID: intel-ish-hid: ISH firmware loader client driver")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Merge request pipelines were only created when changes
were made to drivers/gpu/drm/ci/, causing MRs that
didn't touch this path to break. Fix MR pipeline rules
to trigger jobs for all changes.
Run jobs automatically for marge-bot and scheduled
pipelines, but in all other cases run manually. Also
remove CI_PROJECT_NAMESPACE checks specific to mesa.
Fixes: df54f04f20 ("drm/ci: update gitlab rules")
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Helen Koike <helen.fornazier@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228132620.556079-1-vignesh.raman@collabora.com
Pre-content hooks in page faults introduces potential deadlock of HSM
handler in userspace with filesystem freezing.
The requirement with pre-content event is that for every accessed file
range an event covering at least this range will be generated at least
once before the file data is accesses.
In preparation to disabling pre-content event hooks on page faults,
add pre-content hooks at mmap() variants for the entire mmaped range,
so HSM can fill content when user requests to map a portion of the file.
Note that exec() variant also calls vm_mmap_pgoff() internally to map
code sections, so pre-content hooks are also generated in this case.
Link: https://lore.kernel.org/linux-fsdevel/7ehxrhbvehlrjwvrduoxsao5k3x4aw275patsb3krkwuq573yv@o2hskrfawbnc/
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250312073852.2123409-2-amir73il@gmail.com
The Altera USB Blaster 3, available as both a cable and an on-board
solution, is primarily used for programming and debugging FPGAs.
It interfaces with host software such as Quartus Programmer,
System Console, SignalTap, and Nios Debugger. The device utilizes
either an FT2232 or FT4232 chip.
Enabling the support for various configurations of the on-board
USB Blaster 3 by including the appropriate VID/PID pairs,
allowing it to function as a serial device via ftdi_sio.
Note that this check-in does not include support for the
cable solution, as it does not support UART functionality.
The supported configurations are determined by the
hardware design and include:
1) PID 0x6022, FT2232, 1 JTAG port (Port A) + Port B as UART
2) PID 0x6025, FT4232, 1 JTAG port (Port A) + Port C as UART
3) PID 0x6026, FT4232, 1 JTAG port (Port A) + Port C, D as UART
4) PID 0x6029, FT4232, 1 JTAG port (Port B) + Port C as UART
5) PID 0x602a, FT4232, 1 JTAG port (Port B) + Port C, D as UART
6) PID 0x602c, FT4232, 1 JTAG port (Port A) + Port B as UART
7) PID 0x602d, FT4232, 1 JTAG port (Port A) + Port B, C as UART
8) PID 0x602e, FT4232, 1 JTAG port (Port A) + Port B, C, D as UART
These configurations allow for flexibility in how the USB Blaster 3 is
used, depending on the specific needs of the hardware design.
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
The custom suspend function causes a build warning when CONFIG_PM_SLEEP
is disabled:
sound/soc/codecs/cs42l43.c:2405:12: error: unused function 'cs42l43_codec_runtime_force_suspend' [-Werror,-Wunused-function]
Change SET_SYSTEM_SLEEP_PM_OPS() to the newer SYSTEM_SLEEP_PM_OPS(),
to avoid this.
Fixes: 164b7dd454 ("ASoC: cs42l43: Add jack delay debounce after suspend")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250305172738.3437513-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The warning for suspect probe conditions inadvertently got moved too
early in a prior respin - it happened to work out OK for fwspecs, but in
general still needs to be after the ops->probe_device call so drivers
which filter devices for themselves have a chance to do that.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Fixes: bcb81ac6ae ("iommu: Get DT/ACPI parsing into the proper probe path")
Link: https://lore.kernel.org/r/72a4853e7ef36e7c1c4ca171ed4ed8e1a463a61a.1741791691.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit c780d01cf1 ("media: vb2: vb2_core_queue_init(): sanity check lock
and wait_prepare/finish") added a sanity check to ensure that if there are
no wait_prepare/finish callbacks set by the driver, then the vb2_queue lock
must be set, since otherwise the vb2 core cannot do correct locking.
The rtl2832_sdr.c triggered this warning: it turns out that while the
driver does set this lock, it sets it too late. So move it up to before
the vb2_queue_init() call.
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Closes: https://lore.kernel.org/linux-media/20241211042355.8479-1-user@am64/
Fixes: 8fcd2795d2 ("media: rtl2832_sdr: drop vb2_ops_wait_prepare/finish")
Cc: stable@vger.kernel.org
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
