The intent of console_start was to resume a previously suspended console,
so rename it accordingly.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20250226-printk-renaming-v1-4-0b878577f2e6@suse.com
[pmladek@suse.com: Fixed typo in the commit message. Updated also new drm_log.c.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
The intent of console_stop was in fact to suspend it, so rename the
function accordingly.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20250226-printk-renaming-v1-3-0b878577f2e6@suse.com
[pmladek@suse.com: Fixed typo in the commit message. Updated also new drm_log.c]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Update the __flush_tlb_range_op macro not to modify its parameters as
these are unexepcted semantics. In practice, this fixes the call to
mmu_notifier_arch_invalidate_secondary_tlbs() in
__flush_tlb_range_nosync() to use the correct range instead of an empty
range with start=end. The empty range was (un)lucky as it results in
taking the invalidate-all path that doesn't cause correctness issues,
but can certainly result in suboptimal perf.
This has been broken since commit 6bbd42e2df ("mmu_notifiers: call
invalidate_range() when invalidating TLBs") when the call to the
notifiers was added to __flush_tlb_range(). It predates the addition of
the __flush_tlb_range_op() macro from commit 360839027a ("arm64: tlb:
Refactor the core flush algorithm of __flush_tlb_range") that made the
bug hard to spot.
Fixes: 6bbd42e2df ("mmu_notifiers: call invalidate_range() when invalidating TLBs")
Signed-off-by: Piotr Jaroszynski <pjaroszynski@nvidia.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Nicolin Chen <nicolinc@nvidia.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux.dev
Cc: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/r/20250304085127.2238030-1-pjaroszynski@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
On the arm64 platform with 4K base page config, SECTION_SIZE_BITS is set
to 27, making one section 128M. The related page struct which vmemmap
points to is 2M then.
Commit c1cc155261 ("arm64: MMU initialisation") optimizes the
vmemmap to populate at the PMD section level which was suitable
initially since hot plug granule is always one section(128M). However,
commit ba72b4c8cf ("mm/sparsemem: support sub-section hotplug")
introduced a 2M(SUBSECTION_SIZE) hot plug granule, which disrupted the
existing arm64 assumptions.
The first problem is that if start or end is not aligned to a section
boundary, such as when a subsection is hot added, populating the entire
section is wasteful.
The next problem is if we hotplug something that spans part of 128 MiB
section (subsections, let's call it memblock1), and then hotplug something
that spans another part of a 128 MiB section(subsections, let's call it
memblock2), and subsequently unplug memblock1, vmemmap_free() will clear
the entire PMD entry which also supports memblock2 even though memblock2
is still active.
Assuming hotplug/unplug sizes are guaranteed to be symmetric. Do the
fix similar to x86-64: populate to pages levels if start/end is not aligned
with section boundary.
Cc: stable@vger.kernel.org # v5.4+
Fixes: ba72b4c8cf ("mm/sparsemem: support sub-section hotplug")
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250304072700.3405036-1-quic_zhenhuah@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
The PCIe Gen4x2 PHY for qcs8300 has a lot of difference with sa8775p.
So the qcs8300_qmp_gen4x2_pcie_rx_alt_tbl for qcs8300 is added.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
Link: https://lore.kernel.org/r/20250310063103.3924525-3-quic_ziyuzhan@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The function resume_console has a misleading name, since it resumes all
consoles, so rename it accordingly.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20250226-printk-renaming-v1-2-0b878577f2e6@suse.com
[pmladek@suse.com: Fixed typo in the commit message.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
The function suspend_console has a misleading name, since it suspends all
consoles, so rename it accordingly.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20250226-printk-renaming-v1-1-0b878577f2e6@suse.com
[pmladek@suse.com: Fixed typo in the commit message.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
A blocking notification chain uses a read-write semaphore to protect the
integrity of the chain. The semaphore is acquired for writing when
adding / removing notifiers to / from the chain and acquired for reading
when traversing the chain and informing notifiers about an event.
In case of the blocking switchdev notification chain, recursive
notifications are possible which leads to the semaphore being acquired
twice for reading and to lockdep warnings being generated [1].
Specifically, this can happen when the bridge driver processes a
SWITCHDEV_BRPORT_UNOFFLOADED event which causes it to emit notifications
about deferred events when calling switchdev_deferred_process().
Fix this by converting the notification chain to a raw notification
chain in a similar fashion to the netdev notification chain. Protect
the chain using the RTNL mutex by acquiring it when modifying the chain.
Events are always informed under the RTNL mutex, but add an assertion in
call_switchdev_blocking_notifiers() to make sure this is not violated in
the future.
Maintain the "blocking" prefix as events are always emitted from process
context and listeners are allowed to block.
[1]:
WARNING: possible recursive locking detected
6.14.0-rc4-custom-g079270089484 #1 Not tainted
--------------------------------------------
ip/52731 is trying to acquire lock:
ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0
but task is already holding lock:
ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock((switchdev_blocking_notif_chain).rwsem);
lock((switchdev_blocking_notif_chain).rwsem);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by ip/52731:
#0: ffffffff84f795b0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x727/0x1dc0
#1: ffffffff8731f628 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x790/0x1dc0
#2: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0
stack backtrace:
...
? __pfx_down_read+0x10/0x10
? __pfx_mark_lock+0x10/0x10
? __pfx_switchdev_port_attr_set_deferred+0x10/0x10
blocking_notifier_call_chain+0x58/0xa0
switchdev_port_attr_notify.constprop.0+0xb3/0x1b0
? __pfx_switchdev_port_attr_notify.constprop.0+0x10/0x10
? mark_held_locks+0x94/0xe0
? switchdev_deferred_process+0x11a/0x340
switchdev_port_attr_set_deferred+0x27/0xd0
switchdev_deferred_process+0x164/0x340
br_switchdev_port_unoffload+0xc8/0x100 [bridge]
br_switchdev_blocking_event+0x29f/0x580 [bridge]
notifier_call_chain+0xa2/0x440
blocking_notifier_call_chain+0x6e/0xa0
switchdev_bridge_port_unoffload+0xde/0x1a0
...
Fixes: f7a70d650b ("net: bridge: switchdev: Ensure deferred event delivery on unoffload")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250305121509.631207-1-amcohen@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Meghana Malladi says:
====================
net: ti: icssg-prueth: Add native mode XDP support
This series adds native XDP support using page_pool.
XDP zero copy support is not included in this patch series.
Patch 1/3: Replaces skb with page pool for Rx buffer allocation
Patch 2/3: Adds prueth_swdata struct for SWDATA for all swdata cases
Patch 3/3: Introduces native mode XDP support
v3: https://lore.kernel.org/all/20250224110102.1528552-1-m-malladi@ti.com/
====================
Link: https://patch.msgid.link/20250305101422.1908370-1-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add native XDP support. We do not support zero copy yet.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20250305101422.1908370-4-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We have different cases for SWDATA (skb, page, cmd, etc)
so it is better to have a dedicated data structure for that.
We can embed the type field inside the struct and use it
to interpret the data in completion handlers.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20250305101422.1908370-3-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is to prepare for native XDP support.
The page pool API is more faster in allocating pages than
__alloc_skb(). Drawback is that it works at PAGE_SIZE granularity
so we are not efficient in memory usage.
i.e. we are using PAGE_SIZE (4KB) memory for 1.5KB max packet size.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20250305101422.1908370-2-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
counter:
- Introduce the COUNTER_EVENT_DIRECTION_CHANGE event
- Introduce the COUNTER_COMP_COMPARE helper macro
microchip-tcb-cpature:
- Add IRQ handling
- Add support for capture extensions
- Add support for compare extension
ti-eqep:
- Add support for reading and detecting changes in direction
tools/counter:
- Add counter_watch_events executable to .gitignore
- Support COUNTER_EVENT_DIRECTION_CHANGE in counter_watch_events tool
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZ8+ECgAKCRC1SFbKvhIj
K/i+AQDS3TVUcot2C+NsvNKud2hA2Q7IIIsAsorQgSdjnx9wDAD8CfQvuvEr6JhZ
WuWxw8L59xJAYlInQjpP89pZQA4g+Ao=
=b0Dk
-----END PGP SIGNATURE-----
Merge tag 'counter-updates-for-6.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
Counter updates for 6.15
counter:
- Introduce the COUNTER_EVENT_DIRECTION_CHANGE event
- Introduce the COUNTER_COMP_COMPARE helper macro
microchip-tcb-cpature:
- Add IRQ handling
- Add support for capture extensions
- Add support for compare extension
ti-eqep:
- Add support for reading and detecting changes in direction
tools/counter:
- Add counter_watch_events executable to .gitignore
- Support COUNTER_EVENT_DIRECTION_CHANGE in counter_watch_events tool
* tag 'counter-updates-for-6.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: microchip-tcb-capture: Add support for RC Compare
counter: Introduce the compare component
counter: microchip-tcb-capture: Add capture extensions for registers RA/RB
counter: microchip-tcb-capture: Add IRQ handling
counter: ti-eqep: add direction support
tools/counter: add direction change event to watcher
counter: add direction change event
tools/counter: gitignore counter_watch_events
iwl_trans_reclaim is warning if it is called when the FW is not alive.
But if it is called when there is a pending restart, i.e. after a FW
error, there is no need to warn, instead - return silently.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308231427.ba3d90b22c25.I9332506af1997faefcf0bdb51d98d5e874051722@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Corrected the bit size calculation in the for_each_set_bit macro in
the iwl_dbgfs_tas_get_status_read(). The previous implementation used
sizeof(dyn_status), which only accounts for the number of bytes.
This has been updated to TAS_DYNA_STATUS_MAX to ensure the loop iterates
over the correct number of valid bits in dyn_status.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308231427.65d373e4a10e.If2cea63035333b07849e5a2c2a4f5dc5c5239595@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The FW is now responsible of determining the SMPS mode.
If the user disabled power save in a certain vif, we send the vif-level
power command to clear out the POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK bit
for that vif.
But erroneously, the FW checks DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK in
the device-level command to determine the SMPS mode.
To W/A this, send also the device-level command when the power save of a
vif changes, and disable power save if there is any vif that has power
save disabled.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308231427.7bf205efa027.I2c793ff1fc2a6779a95faaee1ded348100fd97f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The order of actions taken for debug was implemented incorrectly.
Now we implemented the dump split and do the FW reset only in the
middle of the dump (rather than the FW killing itself on error.)
As a result, some of the actions taken when applying the config
will now crash the device, so we need to fix the order.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308231427.6de7fa8e63ed.I40632c48e2a67a8aca05def572a934b88ce7934b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The new reason is added to the iwl_tas_statically_disabled_reason enum
and the corresponding message is updated in the
iwl_dbgfs_tas_get_status_read().
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308231427.5e1272ef3508.I24f668ae716bee20cba15fdc73c3363693bbaf73@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Removed mvm prefix from the following structures and enum names:
1. struct iwl_tas_status_per_mac
2. struct iwl_tas_status_resp
3. enum iwl_tas_dyna_status
4. enum iwl_tas_statically_disabled_reason
As these structures and enums are not specific to mvm.
Replaced TAS_LMAC_BAND_LB, TAS_LMAC_BAND_HB, and TAS_LMAC_BAND_UHB macros
with a generic BAND macro, as these macros are not specific to TAS.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308231427.59144bee9987.Ic2678dcb5afdacc2ca234d4aa4901e7e1f6e8dbb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This UEFI variable name was badly named. Fix its name and also use the
right GUID to find it: we need to use the BT_WIFI (a.k.a. Common) GUID.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308231426.78c998d0fa71.I2bc9d72c1dc2c4d7028f0265634a940c2fadbbb5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the multi-link reconfiguration frame, the per-STA profile for
added links shouldn't include the multi-link element. Set the
association ID to an invalid value, so it doesn't erroneously
match the link ID if that happens to be zero.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.8e5be244c70f.I3472cd5c347814ee3600869a88488997bcd43224@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If disconnecting while ML reconfiguration is in progress,
the data isn't freed because the reset call is too late,
after the vif already switches to non-MLD. Move the call
to fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.abaea69cde42.I7e6b35731ded94fc2d68a2d4ecf81873712c268e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If multi-link reconfiguration fails, we can disconnect with a local link
already allocated but the BSS entry not assigned yet, which leads to a
warning in cfg80211. Add a check to avoid the warning.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.699bd9cbabe5.I599d5ff69092a65e916e2acd25137ae9df8debe8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Spotted during code review, the selectors need to be large
enough for a 128-bit bitmap, not a single unsigned long,
otherwise we have stack corruption.
We should also allow passing selectors from userspace, but
that should be a separate change.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.8f1bcf96a504.Ibeb8970c82a30c97279a4cc4e68faca5df1813a5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Do address translations only between shared links. It is
possible that while an non-AP MLD station and an AP MLD
station have shared links, the frame is intended to be sent
on a link which is not shared (for example when sending a
probe response).
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.1aa461270bb6.Ic21592e1b1634653f02b80628cb2152f6e9de367@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If U-APSD isn't enabled by us, then IEEE80211_STA_UAPSD_ENABLED
won't be set, but the AP can still support it in that case. Only
require U-APSD from the AP if we enabled it, don't require it to
be disabled on the AP if we didn't.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.b4674be12a38.I01959e448c6a2a3e8bc5d561bbae9e8d2cca616a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some regulatory bodies doesn't allow IR (initiate radioation) on a
specific subband, but allows it for channels with a bandwidth of 20 MHz.
Add a channel flag that indicates that, and consider it in
cfg80211_reg_check_beaconing.
While on it, fix the kernel doc of enum nl80211_reg_rule_flags and
change it to use BIT().
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Co-developed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.d3ab352a73ff.I8a8f79e1c9eb74936929463960ee2a324712fe51@changeid
[fix typo]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Support passing the value from userspace on to the AP in the
association and ML link reconfiguration requests. We may need
to also add a driver value to or in with the field, but for
now have no feature that is controlled by the driver.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.2e555beb0a76.I623f59023b47ec202fc0c7520f2b5f575b439927@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some extended MLD capabilities and operations bits (currently
the "BTM MLD Recommendataion For Multiple APs Support" bit)
may depend on userspace capabilities. Allow userspace to pass
the values for this field that it supports to the association
and link reconfiguration operations.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20250308225541.bd52078b5f65.I4dd8f53b0030db7ea87a2e0920989e7e2c7b5345@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In previous kernels, there were conflicting definitions for what
ioread64_lo_hi() and similar functions were supposed to do on
architectures with native 64-bit MMIO. Based on the actual usage in
drivers, they are in fact expected to be a pair of 32-bit accesses on
all architectures, which makes the powerpc64 definition wrong.
Remove it and use the generic implementation instead.
Drivers that want to have split lo/hi or hi/lo accesses on 32-bit
architectures but can use 64-bit accesses where supported should instead
use ioread64()/iowrite64() after including the corresponding header file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
parisc uses custom iomap helpers to map bus specific function calls into
a linear __iomem token, but it tries to use the declarations from the x86
"generic iomap" code.
Untangle the two by duplicating the required declations and dropping
the #include that pulls in more stuff that is not needed here, to
allow simplify the generic version later.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When building the kernel on Arch Linux using on x86_64 with tools:
$ rustc --version
rustc 1.84.0 (9fc6b4312 2025-01-07)
$ clang --version
clang version 19.1.7
Target: x86_64-pc-linux-gnu
The following symbols are generated:
$ nm vmlinux | rg ' _R' | rustfilt | rg faux
ffffffff81959ae0 T <kernel::faux::Registration>::new
ffffffff81959b40 T <kernel::faux::Registration as core::ops::drop::Drop>::drop
However, these Rust symbols are wrappers around bindings in the C faux
code. Inlining these functions removes the middle-man wrapper function
After applying this patch, the above function signatures disappear.
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/jesg4yu7m6fvzmgg5tlsktrrjm36l4qsranto5mdmnucx4pvf3@nhvt4juw5es3
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ioread/iowrite functions on sh only do memory mapped I/O like the
generic verion, and never map onto non-MMIO inb/outb variants, so they
just add complexity. In particular, the use of asm-generic/iomap.h
ties the declaration to the x86 implementation.
Remove the custom versions and use the architecture-independent fallback
code instead. Some of the calling conventions on sh are different here,
so fix that by adding 'volatile' keywords where required by the generic
implementation and change the cpg clock driver to no longer depend on
the interesting choice of return types for ioread8/ioread16/ioread32.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
