Acer's WMI driver uses balanced-performance but AMD-PMF doesn't.
In case a machine binds with both drivers let amd-pmf use
balanced-performance as well.
Fixes: 688834743d ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-4-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When amd-pmf and asus-wmi are both bound no low power option shows
up in sysfs. Add a hidden choice for amd-pmf to support 'quiet' mode
to let both bind.
Fixes: 688834743d ("ACPI: platform_profile: Allow multiple handlers")
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-3-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When two drivers don't support all the same profiles the legacy interface
only exports the common profiles.
This causes problems for cases where one driver uses low-power but another
uses quiet because the result is that neither is exported to sysfs.
To allow two drivers to disagree, add support for "hidden choices".
Hidden choices are platform profiles that a driver supports to be
compatible with the platform profile of another driver.
Fixes: 688834743d ("ACPI: platform_profile: Allow multiple handlers")
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Closes: https://lore.kernel.org/platform-driver-x86/e64b771e-3255-42ad-9257-5b8fc6c24ac9@gmx.de/T/#mc068042dd29df36c16c8af92664860fc4763974b
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250228170155.2623386-2-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Any rules using engine matching are currently broken due RTP processing
happening too in early init, before the list of hardware engines has been
initialised.
Fix this by moving workaround processing to later in the driver probe
sequence, to just before the processed list is used for the first time.
Looking at the debugfs gt0/workarounds on ADL-P we notice 14011060649
should be present while we see, before:
GT Workarounds
14011059788
14015795083
And with the patch:
GT Workarounds
14011060649
14011059788
14015795083
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227101304.46660-2-tvrtko.ursulin@igalia.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 25d434cef7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently we just leave it uninitialised, which at first looks harmless,
however we also don't zero out the pfn array, and with pfn_flags_mask
the idea is to be able set individual flags for a given range of pfn or
completely ignore them, outside of default_flags. So here we end up with
pfn[i] & pfn_flags_mask, and if both are uninitialised we might get back
an unexpected flags value, like asking for read only with default_flags,
but getting back write on top, leading to potentially bogus behaviour.
To fix this ensure we zero the pfn_flags_mask, such that hmm only
considers the default_flags and not also the initial pfn[i] value.
v2 (Thomas):
- Prefer proper initializer.
Fixes: 81e058a3e7 ("drm/xe: Introduce helper to populate userptr")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226174748.294285-2-matthew.auld@intel.com
(cherry picked from commit dd8c01e42f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We create the stream encoders and attach connectors for each pipe we
have. As the number of pipes has increased, we've failed to update the
topology manager maximum number of payloads to match that. Bump up the
max stream count to match number of pipes, enabling the fourth stream on
platforms that support four pipes.
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226135626.1956012-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 15bccbfb78)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is already handled below in the code by fixup_initial_plane_config.
Fixes: a815362752 ("drm/i915: Try to relocate the BIOS fb to the start of ggtt")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210083111.230484-3-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
(cherry picked from commit 2218704997)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Make __per_cpu_hot_end marker point to the end of the percpu cache
hot data, not to the end of the percpu cache hot section.
This fixes CONFIG_MPENTIUM4 case where X86_L1_CACHE_SHIFT
is set to 7 (128 bytes).
Also update assert message accordingly.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Link: https://lore.kernel.org/r/20250304173455.89361-1-ubizjak@gmail.com
Closes: https://lore.kernel.org/lkml/Z8a-NVJs-pm5W-mG@gmail.com/
Also change the alignment of the percpu hot section:
- PERCPU_SECTION(INTERNODE_CACHE_BYTES)
+ PERCPU_SECTION(L1_CACHE_BYTES)
As vSMP will muck with INTERNODE_CACHE_BYTES that invalidates the
too-large-section assert we do:
ASSERT(__per_cpu_hot_end - __per_cpu_hot_start <= 64, "percpu cache hot section too large")
[ mingo: Added INTERNODE_CACHE_BYTES fix & explanation. ]
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-3-brgerst@gmail.com
Add a subsection to the percpu data for frequently accessed variables
that should remain cached on each processor. These varables should not
be accessed from other processors to avoid cacheline bouncing.
This will replace the pcpu_hot struct on x86, and open up similar
functionality to other architectures and the kernel core.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-2-brgerst@gmail.com
The return values of these functions is 0/1, but they use an int
type instead of bool:
check_stack_overflow()
execute_on_irq_stack()
Change the type of these function to bool and adjust their return
values and affected helper variables.
[ mingo: Rewrote the changelog ]
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303155446.112769-5-ubizjak@gmail.com
Make code more readable by using the 'current_stack_pointer' global variable.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303155446.112769-4-ubizjak@gmail.com
The functions osnoise_hist_main(), osnoise_top_main(),
timerlat_hist_main(), and timerlat_top_main() are lengthy and contain
duplicated code.
Refactor by consolidating the duplicate lines into the
save_trace_to_file() function.
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Cc: Eder Zulian <ezulian@redhat.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250219115138.406075-1-costa.shul@redhat.com
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Tested-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
rv, unlike rtla and perf, drops LDFLAGS supplied by the user and honors
only EXTRA_LDFLAGS. This is inconsistent with both perf and rtla and
can lead to all kinds of unexpected behavior.
For example, on Fedora and RHEL, it causes rv to be build without
PIE, unlike the aforementioned perf and rtla:
$ file /usr/bin/{rv,rtla,perf}
/usr/bin/rv: ELF 64-bit LSB executable, ...
/usr/bin/rtla: ELF 64-bit LSB pie executable, ...
/usr/bin/perf: ELF 64-bit LSB pie executable, ...
Keep both LDFLAGS and EXTRA_LDFLAGS for the build.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250304142228.767658-1-tglozar@redhat.com
Fixes: 012e4e77df ("tools/verification: Use tools/build makefiles on rv")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
i386 ABI declares %edx as a call-clobbered register.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303155446.112769-2-ubizjak@gmail.com
Also use inout "+" constraint modifier where appropriate.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303155446.112769-1-ubizjak@gmail.com
Commit 2a86f66121 ("kbuild: use KBUILD_DEFCONFIG as the fallback
for DEFCONFIG_LIST") removed arch/$ARCH/defconfig; however,
the document has not been updated to reflect this change yet.
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The headercheck tries to call clang with a mix of compiler arguments
that don't include the target architecture. When building e.g. x86
headers on arm64, this produces a warning like
clang: warning: unknown platform, assuming -mfloat-abi=soft
Add in the KBUILD_CPPFLAGS, which contain the target, in order to make it
build properly.
See also 1b71c2fb04 ("kbuild: userprogs: fix bitsize and target
detection on clang").
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Fixes: feb843a469 ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Revert reserved-memory 'alignment' property to use '#address-cells'
instead of '#size-cells'. What's in use trumps the spec.
-----BEGIN PGP SIGNATURE-----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=SJ8W
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fix from Rob Herring:
- Revert reserved-memory 'alignment' property to use '#address-cells'
instead of '#size-cells'. What's in use trumps the spec.
* tag 'devicetree-fixes-for-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
Revert "of: reserved-memory: Fix using wrong number of cells to get property 'alignment'"
The userprog infrastructure links objects files through $(CC).
Either explicitly by manually calling $(CC) on multiple object files or
implicitly by directly compiling a source file to an executable.
The documentation at Documentation/kbuild/llvm.rst indicates that ld.lld
would be used for linking if LLVM=1 is specified.
However clang instead will use either a globally installed cross linker
from $PATH called ${target}-ld or fall back to the system linker, which
probably does not support crosslinking.
For the normal kernel build this is not an issue because the linker is
always executed directly, without the compiler being involved.
Explicitly pass --ld-path to clang so $(LD) is respected.
As clang 13.0.1 is required to build the kernel, this option is available.
Fixes: 7f3a59db27 ("kbuild: add infrastructure to build userspace programs")
Cc: stable@vger.kernel.org # needs wrapping in $(cc-option) for < 6.9
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
pipe_readable(), pipe_writable(), and pipe_poll() can read "pipe->head"
and "pipe->tail" outside of "pipe->mutex" critical section. When the
head and the tail are read individually in that order, there is a window
for interruption between the two reads in which both the head and the
tail can be updated by concurrent readers and writers.
One of the problematic scenarios observed with hackbench running
multiple groups on a large server on a particular pipe inode is as
follows:
pipe->head = 36
pipe->tail = 36
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wakes up: pipe not full*
hackbench-118762 [057] ..... 1029.550548: pipe_write: head: 36 -> 37 [tail: 36]
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wake up next reader 118740*
hackbench-118762 [057] ..... 1029.550548: pipe_write: *wake up next writer 118768*
hackbench-118768 [206] ..... 1029.55055X: pipe_write: *writer wakes up*
hackbench-118768 [206] ..... 1029.55055X: pipe_write: head = READ_ONCE(pipe->head) [37]
... CPU 206 interrupted (exact wakeup was not traced but 118768 did read head at 37 in traces)
hackbench-118740 [057] ..... 1029.550558: pipe_read: *reader wakes up: pipe is not empty*
hackbench-118740 [057] ..... 1029.550558: pipe_read: tail: 36 -> 37 [head = 37]
hackbench-118740 [057] ..... 1029.550559: pipe_read: *pipe is empty; wakeup writer 118768*
hackbench-118740 [057] ..... 1029.550559: pipe_read: *sleeps*
hackbench-118766 [185] ..... 1029.550592: pipe_write: *New writer comes in*
hackbench-118766 [185] ..... 1029.550592: pipe_write: head: 37 -> 38 [tail: 37]
hackbench-118766 [185] ..... 1029.550592: pipe_write: *wakes up reader 118766*
hackbench-118740 [185] ..... 1029.550598: pipe_read: *reader wakes up; pipe not empty*
hackbench-118740 [185] ..... 1029.550599: pipe_read: tail: 37 -> 38 [head: 38]
hackbench-118740 [185] ..... 1029.550599: pipe_read: *pipe is empty*
hackbench-118740 [185] ..... 1029.550599: pipe_read: *reader sleeps; wakeup writer 118768*
... CPU 206 switches back to writer
hackbench-118768 [206] ..... 1029.550601: pipe_write: tail = READ_ONCE(pipe->tail) [38]
hackbench-118768 [206] ..... 1029.550601: pipe_write: pipe_full()? (u32)(37 - 38) >= 16? Yes
hackbench-118768 [206] ..... 1029.550601: pipe_write: *writer goes back to sleep*
[ Tasks 118740 and 118768 can then indefinitely wait on each other. ]
The unsigned arithmetic in pipe_occupancy() wraps around when
"pipe->tail > pipe->head" leading to pipe_full() returning true despite
the pipe being empty.
The case of genuine wraparound of "pipe->head" is handled since pipe
buffer has data allowing readers to make progress until the pipe->tail
wraps too after which the reader will wakeup a sleeping writer, however,
mistaking the pipe to be full when it is in fact empty can lead to
readers and writers waiting on each other indefinitely.
This issue became more problematic and surfaced as a hang in hackbench
after the optimization in commit aaec5a95d5 ("pipe_read: don't wake up
the writer if the pipe is still full") significantly reduced the number
of spurious wakeups of writers that had previously helped mask the
issue.
To avoid missing any updates between the reads of "pipe->head" and
"pipe->write", unionize the two with a single unsigned long
"pipe->head_tail" member that can be loaded atomically.
Using "pipe->head_tail" to read the head and the tail ensures the
lockless checks do not miss any updates to the head or the tail and
since those two are only updated under "pipe->mutex", it ensures that
the head is always ahead of, or equal to the tail resulting in correct
calculations.
[ prateek: commit log, testing on x86 platforms. ]
Reported-and-debugged-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Closes: https://lore.kernel.org/lkml/e813814e-7094-4673-bc69-731af065a0eb@amd.com/
Reported-by: Alexey Gladkov <legion@kernel.org>
Closes: https://lore.kernel.org/all/Z8Wn0nTvevLRG_4m@example.org/
Fixes: 8cefc107ca ("pipe: Use head and tail pointers for the ring, not cursor and length")
Tested-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
Change 'dais' property to be optional, that fsl_audmix device can be
linked with SAI device by audio graph card.
Add support for Marvell Technology Group Ltd. 88SE9215 SATA 6 Gb/s
controller, which is e.g. used in the DAWICONTROL DC-614e RAID bus
controller and was not automatically recognized before.
Tested with a DAWICONTROL DC-614e RAID bus controller.
Signed-off-by: Daniel Kral <d.kral@proxmox.com>
Link: https://lore.kernel.org/r/20250304092030.37108-1-d.kral@proxmox.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The Coresight TMC Control Unit hosts miscellaneous configuration registers
which control various features related to TMC ETR sink.
Based on the trace ID, which is programmed in the related CTCU ATID
register of a specific ETR, trace data with that trace ID gets into
the ETR buffer, while other trace data gets dropped.
Enabling source device sets one bit of the ATID register based on
source device's trace ID.
Disabling source device resets the bit according to the source
device's trace ID.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-10-quic_jiegan@quicinc.com
Add binding file to specify how to define a Coresight TMC Control Unit device
in device tree.
It is responsible for controlling the data filter function based on the source
device's Trace ID for TMC ETR device. The trace data with that Trace id can get
into ETR's buffer while other trace data gets ignored.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-9-quic_jiegan@quicinc.com
Modify following functions to accept the coresight_path. Devices in the path
can read data from coresight_path if needed.
- coresight_enable_path
- coresight_disable_path
- coresight_get_source
- coresight_get_sink
- coresight_enable_helpers
- coresight_disable_helpers
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-8-quic_jiegan@quicinc.com
The source device can directly read the trace ID from the coresight_path
which result in etm_read_alloc_trace_id and etm4_read_alloc_trace_id being
deleted.
Co-developed-by: James Clark <james.clark@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-7-quic_jiegan@quicinc.com
The trace_id will be stored in coresight_path instead of being declared
everywhere and allocated after building the path.
Co-developed-by: James Clark <james.clark@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-6-quic_jiegan@quicinc.com
Introduce a new strcuture, 'struct coresight_path', to store the data that
utilized by the devices in the path. The coresight_path will be built/released
by coresight_build_path/coresight_release_path functions.
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-5-quic_jiegan@quicinc.com
Add tracing support to track sched_ext core events
(/sched_ext/sched_ext_event). This may be useful for debugging sched_ext
schedulers that trigger a particular event.
The trace point can be used as other trace points, so it can be used in,
for example, `perf trace` and BPF programs, as follows:
======
$> sudo perf trace -e sched_ext:sched_ext_event --filter 'name == "SCX_EV_ENQ_SLICE_DFL"'
======
======
struct tp_sched_ext_event {
struct trace_entry ent;
u32 __data_loc_name;
s64 delta;
};
SEC("tracepoint/sched_ext/sched_ext_event")
int rtp_add_event(struct tp_sched_ext_event *ctx)
{
char event_name[128];
unsigned short offset = ctx->__data_loc_name & 0xFFFF;
bpf_probe_read_str((void *)event_name, 128, (char *)ctx + offset);
bpf_printk("name %s delta %lld", event_name, ctx->delta);
return 0;
}
======
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The event count could be negative in the future,
so change the event type from u64 to s64.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The UM builds distinguish i386 from x86_64 via SUBARCH, but we don't
support building i386 directly with Clang. To make SUBARCH work for
i386 UM, we need to explicitly test for it.
This lets me run i386 KUnit tests with Clang:
$ ./tools/testing/kunit/kunit.py run \
--make_options LLVM=1 \
--make_options SUBARCH=i386
...
Fixes: c7500c1b53 ("um: Allow builds with Clang")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250304162124.it.785-kees@kernel.org
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Using the RTLA_NO_BPF environmental variable, execute rtla-timerlat
tests both with and without BPF support to cover both paths.
If rtla is built without BPF or the osnoise:timerlat_sample trace event
is not available, test only the non-BPF path.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250218145859.27762-9-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Collect samples using BPF program instead of pulling them from tracefs.
If the osnoise:timerlat_sample tracepoint is unavailable or the BPF
program fails to load for whatever reason, rtla falls back to the old
implementation.
The collection of samples using the BPF program is fully self-contained
and requires no activity of the userspace part of rtla during the
measurement. Thus, rtla only pulls the summary from the BPF map and
displays it every second, improving the performance.
In --aa-only mode, the BPF program does not collect any data and only
signalizes the end of tracing to userspace. An optimization that re-used
the main trace instance for auto-analysis in aa-only mode was dropped, as
rtla no longer turns tracing on in the main trace instance, making it
useless for auto-analysis.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250218145859.27762-8-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Unlike timerlat-hist, timerlat-top applies the output divisor used to
set ns/us mode when printing results instead of applying it when
collecting the samples.
Move the application of the divisor from timerlat_top_print into
timerlat_top_update to make it consistent with timerlat-hist.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250218145859.27762-7-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Collect samples using BPF program instead of pulling them from tracefs.
If the osnoise:timerlat_sample tracepoint is unavailable or the BPF
program fails to load for whatever reason, rtla falls back to the old
implementation.
The collection of samples using the BPF program is fully self-contained
and requires no activity of the userspace part of rtla during the
measurement. Thus, instead of waking up every second to collect samples,
rtla simply sleeps until woken up by a signal or threshold overflow.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250218145859.27762-6-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add BPF program that attaches to the osnoise:timerlat_sample tracepoint
and collects both the summary and the histogram (if requested) into BPF
maps (one map of each kind per context).
The program is designed to be used for both timerlat-top and
timerlat-hist. If using with timerlat-top, the "entries" parameter is
set to zero, which prevents the BPF program from recording histogram
entries. In that case, the maps for histograms do not have to be
created, as the BPF verifier will identify the code using them as
unreachable.
An IRQ or thread latency threshold might be supplied to stop recording
if hit, similar to the timerlat tracer threshold, which stops ftrace
tracing if hit. A BPF ringbuffer is used to signal threshold overflow to
userspace. In aa-only mode, this is the only function of the BPF
program.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250218145859.27762-5-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If tooling required for building BPF CO-RE skeletons is present (that
is, libbpf, clang with BPF CO-RE support, and bpftool), turn on
HAVE_BPF_SKEL flag.
Those requirements are similar to what perf requires, with the
difference of using system libbpf and bpftool instead of in-tree
versions.
rtla can be forcefully built without BPF skeleton support by setting
BUILD_BPF_SKEL=0 manually; in that case, a warning is displayed.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250218145859.27762-4-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
