Default DTs should be minimal. It is cumbersome carrying a custom patch
disabling the heartbeat just to use the LED for own cases.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20250131162611.33338-6-wsa+renesas@sang-engineering.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
It is active high per testing via sysfs. Also matches the very similar
usb_a9263 variant.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20250131162611.33338-5-wsa+renesas@sang-engineering.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
I'm currently working on a Samsung SoC which includes SPI.
I'd like to be Cc'ed to further contributions and help on reviewing
them. Add me as reviewer.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://patch.msgid.link/20250213-gs101-spi-r-v1-1-1e3ab8096873@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to call runtime PM put APIs on error path of
`atmel_qspi_sama7g5_transfer()` as the caller (`atmel_qspi_exec_op()`)
of it will take care of this if needed.
Fixes: 5af42209a4 ("spi: atmel-quadspi: Add support for sama7g5 QSPI")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Reported-by: Alexander Dahl <ada@thorsis.com>
Closes: https://lore.kernel.org/linux-spi/20250109-carat-festivity-5f088e1add3c@thorsis.com/
[ csokas.bence: Rebase and clarify msg, fix/add tags ]
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250207122145.162183-2-csokas.bence@prolan.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
When we shut down the amp, we need to wait for the built-in ramp-down
before we can remove the TDM clocks. There is no documented status
regiter to poll, so the best we can do is a delay. Datasheet says 5.9ms
for ramp-down and 1.5ms between shutdown and next startup, so let's do
6ms after mute and 2ms after shutdown. That gives us a cumulative 8ms
for ramp-down and guaratees the required minimum shutdown time.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250208-asoc-tas2764-v1-2-dbab892a69b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC convention is that clocks are removed after codec mute, and
power up/down is more about top level power management. For these chips,
the "mute" state still expects a TDM clock, and yanking the clock in
this state will trigger clock errors. So, do the full
shutdown<->mute<->active transition on the mute operation, so the amp is
in software shutdown by the time the clocks are removed.
This fixes TDM clock errors when streams are stopped.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250208-asoc-tas2764-v1-1-dbab892a69b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
DPCM is already difficult to read, but now dpcm_dai_trigger_fe_be() even
difficult to read.
static int dpcm_dai_trigger_fe_be(.., fe_first)
{
^ if (fe_first) {
(A) ...
|(x) goto end;
v }
^
(B) ...
v
end:
return ...
}
It want to switch function call order by using "fe_first" for fe->be
order part (A), or be->fe order part (B). But the code is using "goto"
in last of (A) (=x).
Just use "if..else" for (A) (B) is easy to read and understand what it
want to do.
static int dpcm_dai_trigger_fe_be(.., fe_first)
{
^ if (fe_first) {
(A) ...
v }
^ else {
(B) ...
v }
return ...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ikpfyjyo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_process_paths() will call dpcm_add_paths() (A) or
dpcm_prune_paths() (B)
dpcm_process_paths(..., new)
{
if (new)
(A) return dpcm_add_paths(...);
else
(B) return dpcm_prune_paths(...);
}
but the user who need to call dpcm_prune_paths() (B) is only
soc_dpcm_fe_runtime_update(), all other user want to call is
dpcm_add_paths() (A). We don't need to have confusing
dpcm_process_paths(). Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87jz9vyjyu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card :: update is used only for passing parameters to
dapm_widget_update() like below.
card->update = update;
ret = soc_dapm_xxx(card, ...);
card->update = NULL;
Let's passing it via function parameter and remove update from
snd_soc_card.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ldubyjz9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can get struct snd_soc_pcm_runtime from struct snd_pcm_substream,
no need to have both as function parameter. Let's shrink it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87mseryk5l.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_set_tdm_slot() calls .xlate_tdm_slot_mask() or
snd_soc_xlate_tdm_slot_mask(), but didn't check its return value.
Let's check it.
This patch might break existing driver. In such case, let's makes
each func to void instead of int.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o6z7yk61.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No one uses dpcm_dapm_stream_event() return value, and it always
return 0. Let's makes it void.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87seojyk6m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-core.c only calls snd_soc_set_dmi_name(), so we don't need to have
EXPORT_SYMBOL_GPL() for it. Let's makes it local function.
No one uses *flavour parameter, let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v7tfyk7b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All dpcm from for_each_dpcm_be(fe, ...) loop has same fe
(that is the reason to connected to this list). We don't need to
check (dpcm->fe == fe) in this loop.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87wmdvyk87.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently it's not easy to see at a glance the group of the registers
that are per port. Add a blank line and a comment to make it better.
Also add a missing definition for one of the EEPROM related registers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The 'arg' variable in cy8c95x0_gpio_get_pincfg() is already type of u16.
No need to cast it, so drop unneeded casting.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The 'ret' variable in cy8c95x0_irq_handler() is defined as bool,
but is intialised with integers. Avoid implicit castings and
initialise boolean variable with boolean values.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The function is never called with the PORTSEL register in the argument.
Drop unneeded check, but rescue a comment. While at it, drop inline
and allow any compiler to choose better stragy (note, that inline in
C code is only a recomendation to most of the modern compilers anyway).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The returned value of cy8c95x0_regmap_read() is used always with
a bitmask being applied. Move that bitmasking code into the function.
At the same time transform it to cy8c95x0_regmap_read_bits() which
will be in align with the write and update counterparts.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There are bitmap_gather() and bitmap_scatter() that are factually
reimplemented in the driver. Use better bitmap APIs where appropriate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
irq_mask()/irq_unmask() are not called for nested interrupts. So level
interrupts are never masked, chip's interrupt output is not cleared on
INTCAP or GPIO read, the irq handler is uselessly called again. Nested
irq handler is not called again, because interrupt reason is cleared by
its first call.
/proc/interrupts shows that number of chip's irqs is greater than
number of nested irqs.
This patch adds masking and unmasking level interrupts inside irq handler.
Signed-off-by: Dmitry Mastykin <mastichi@gmail.com>
Link: https://lore.kernel.org/20250122120504.1279790-1-mastichi@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
fwnode_irq_get() was changed to not return 0, fix this by checking
for negative error, also update the error log.
Fixes: acf4884a57 ("pinctrl: nuvoton: add NPCM8XX pinctrl and GPIO driver")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/20250118031334.243324-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
fwnode_irq_get() was changed to not return 0, so this check is dead code now.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/20250118031145.243104-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cross case in pinctrl framework make impossible to an hogged pin and
another, not hogged, used within the same device-tree node. For example
with this simplified device-tree :
&pinctrl {
pinctrl_pin_1: pinctrl-pin-1 {
pins = "dummy-pinctrl-pin";
};
};
&rtc {
pinctrl-names = "default"
pinctrl-0 = <&pinctrl_pin_1 &rtc_pin_1>
rtc_pin_1: rtc-pin-1 {
pins = "dummy-rtc-pin";
};
};
"pinctrl_pin_1" configuration is never set. This produces this path in
the code:
really_probe()
pinctrl_bind_pins()
| devm_pinctrl_get()
| pinctrl_get()
| create_pinctrl()
| pinctrl_dt_to_map()
| // Hog pin create an abort for all pins of the node
| ret = dt_to_map_one_config()
| | /* Do not defer probing of hogs (circular loop) */
| | if (np_pctldev == p->dev->of_node)
| | return -ENODEV;
| if (ret)
| goto err
|
call_driver_probe()
stm32_rtc_probe()
pinctrl_enable()
pinctrl_claim_hogs()
create_pinctrl()
for_each_maps(maps_node, i, map)
// Not hog pin is skipped
if (pctldev && strcmp(dev_name(pctldev->dev),
map->ctrl_dev_name))
continue;
At the first call of create_pinctrl() the hogged pin produces an abort to
avoid a defer of hogged pins. All other pin configurations are trashed.
At the second call, create_pinctrl is now called with pctldev parameter to
get hogs, but in this context only hogs are set. And other pins are
skipped.
To handle this, do not produce an abort in the first call of
create_pinctrl(). Classic pin configuration will be set in
pinctrl_bind_pins() context. And the hogged pin configuration will be set
in pinctrl_claim_hogs() context.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/20250116170009.2075544-1-valentin.caron@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When the user sets a file or directory as read-only (e.g. ~S_IWUGO),
the client will set the ATTR_READONLY attribute by sending an
SMB2_SET_INFO request to the server in cifs_setattr_{,nounix}(), but
cifsInodeInfo::cifsAttrs will be left unchanged as the client will
only update the new file attributes in the next call to
{smb311_posix,cifs}_get_inode_info() with the new metadata filled in
@data parameter.
Commit a18280e7fd ("smb: cilent: set reparse mount points as
automounts") mistakenly removed the @data NULL check when calling
is_inode_cache_good(), which broke the above case as the new
ATTR_READONLY attribute would end up not being updated on files with a
read lease.
Fix this by updating the inode whenever we have cached metadata in
@data parameter.
Reported-by: Horst Reiterer <horst.reiterer@fabasoft.com>
Closes: https://lore.kernel.org/r/85a16504e09147a195ac0aac1c801280@fabasoft.com
Fixes: a18280e7fd ("smb: cilent: set reparse mount points as automounts")
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If SMACK label has CIPSO representation w/o categories, e.g.:
| # cat /smack/cipso2
| foo 10
| @ 250/2
| ...
then SMACK does not recognize such CIPSO in input ipv4 packets
and substitues '*' label instead. Audit records may look like
| lsm=SMACK fn=smack_socket_sock_rcv_skb action=denied
| subject="*" object="_" requested=w pid=0 comm="swapper/1" ...
This happens in two steps:
1) security/smack/smackfs.c`smk_set_cipso
does not clear NETLBL_SECATTR_MLS_CAT
from (struct smack_known *)skp->smk_netlabel.flags
on assigning CIPSO w/o categories:
| rcu_assign_pointer(skp->smk_netlabel.attr.mls.cat, ncats.attr.mls.cat);
| skp->smk_netlabel.attr.mls.lvl = ncats.attr.mls.lvl;
2) security/smack/smack_lsm.c`smack_from_secattr
can not match skp->smk_netlabel with input packet's
struct netlbl_lsm_secattr *sap
because sap->flags have not NETLBL_SECATTR_MLS_CAT (what is correct)
but skp->smk_netlabel.flags have (what is incorrect):
| if ((sap->flags & NETLBL_SECATTR_MLS_CAT) == 0) {
| if ((skp->smk_netlabel.flags &
| NETLBL_SECATTR_MLS_CAT) == 0)
| found = 1;
| break;
| }
This commit sets/clears NETLBL_SECATTR_MLS_CAT in
skp->smk_netlabel.flags according to the presense of CIPSO categories.
The update of smk_netlabel is not atomic, so input packets processing
still may be incorrect during short time while update proceeds.
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
- Fix annoying logs when building tools in parallel
- Fix the Debian linux-headers package build again
- Fix the target triple detection for userspace programs on Clang
-----BEGIN PGP SIGNATURE-----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=56TH
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix annoying logs when building tools in parallel
- Fix the Debian linux-headers package build again
- Fix the target triple detection for userspace programs on Clang
* tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Fix a few typos in a comment
kbuild: userprogs: fix bitsize and target detection on clang
kbuild: fix linux-headers package build when $(CC) cannot link userspace
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
Here is a driver core new api for 6.14-rc3 that is being added to allow
platform devices from stop being abused. It adds a new "faux_device"
structure and bus and api to allow almost a straight or simpler
conversion from platform devices that were not really a platform device.
It also comes with a binding for rust, with an example driver in rust
showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now through
their different development trees, in time for 6.15-rc1. We have a
number that are already reviewed and tested, but adding those
conversions now doesn't seem right. For now, no one is using this, and
it passes all build tests from 0-day and linux-next, so all should be
good.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ7H+sQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yljfwCfdP8AvZeIdx89cqS0djspBSFLw1MAoIpq7Pbi
6BY+VOuDSZNdBKXFLR/x
=2qRL
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
Here are some small serial driver fixes for some reported problems for
6.14-rc3. Nothing major, just:
- sc16is7xx irq check fix
- 8250 fifo underflow fix
- serial_port and 8250 iotype fixes
Most of these have been in linux-next already, and all have passed 0-day
testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ7H/YQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykxAwCbBpzMC3xtuqSw/PCrFGbBNeMVuQcAoKtoQYWr
Zro9O1hxTOfbFNeHEVtj
=XvcE
-----END PGP SIGNATURE-----
Merge tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for some reported problems.
Nothing major, just:
- sc16is7xx irq check fix
- 8250 fifo underflow fix
- serial_port and 8250 iotype fixes
Most of these have been in linux-next already, and all have passed
0-day testing"
* tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Fix fifo underflow on flush
serial: 8250_pnp: Remove unneeded ->iotype assignment
serial: 8250_platform: Remove unneeded ->iotype assignment
serial: 8250_of: Remove unneeded ->iotype assignment
serial: port: Make ->iotype validation global in __uart_read_properties()
serial: port: Always update ->iotype in __uart_read_properties()
serial: port: Assign ->iotype correctly when ->iobase is set
serial: sc16is7xx: Fix IRQ number check behavior
Here are some small USB driver fixes, and new device ids, for 6.14-rc3.
Lots of tiny stuff for reported problems, including:
- new device ids and quirks
- usb hub crash fix found by syzbot
- dwc2 driver fix
- dwc3 driver fixes
- uvc gadget driver fix
- cdc-acm driver fixes for a variety of different issues
- other tiny bugfixes
Almost all of these have been in linux-next this week, and all have
passed 0-day testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ7H/9Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym9YgCeIG0YNJa3Bb8gVQOnNwbOXzSpt84AniHDxqW9
EMqZy36ZYzee04t1wR0b
=La/t
-----END PGP SIGNATURE-----
Merge tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes, and new device ids, for
6.14-rc3. Lots of tiny stuff for reported problems, including:
- new device ids and quirks
- usb hub crash fix found by syzbot
- dwc2 driver fix
- dwc3 driver fixes
- uvc gadget driver fix
- cdc-acm driver fixes for a variety of different issues
- other tiny bugfixes
Almost all of these have been in linux-next this week, and all have
passed 0-day testing"
* tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY
usb: roles: set switch registered flag early on
usb: gadget: uvc: Fix unstarted kthread worker
USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist
usb: gadget: core: flush gadget workqueue after device removal
USB: gadget: f_midi: f_midi_complete to call queue_work
usb: core: fix pipe creation for get_bMaxPacketSize0
usb: dwc3: Fix timeout issue during controller enter/exit from halt state
USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone
USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk
usb: cdc-acm: Fix handling of oversized fragments
usb: cdc-acm: Check control transfer buffer size before access
usb: xhci: Restore xhci_pci support for Renesas HCs
USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI
USB: serial: option: drop MeiG Smart defines
USB: serial: option: fix Telit Cinterion FN990A name
USB: serial: option: add Telit Cinterion FN990B compositions
USB: serial: option: add MeiG Smart SLM828
usb: gadget: f_midi: fix MIDI Streaming descriptor lengths
usb: dwc2: gadget: remove of_node reference upon udc_stop
...
handoff to the OS
- Check CPUID(0x23) leaf and subleafs presence properly
- Remove the PEBS-via-PT feature from being supported on hybrid systems
- Fix perf record/top default commands on systems without a raw PMU registered
-----BEGIN PGP SIGNATURE-----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=ThZf
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being
enabled after handoff to the OS
- Check CPUID(0x23) leaf and subleafs presence properly
- Remove the PEBS-via-PT feature from being supported on hybrid systems
- Fix perf record/top default commands on systems without a raw PMU
registered
* tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Ensure LBRs are disabled when a CPU is starting
perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF
perf/x86/intel: Clean up PEBS-via-PT on hybrid
perf/x86/rapl: Fix the error checking order
clear its removal from that queue is atomic
-----BEGIN PGP SIGNATURE-----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=J43o
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Clarify what happens when a task is woken up from the wake queue and
make clear its removal from that queue is atomic
* tag 'sched_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Clarify wake_up_q()'s write to task->wake_q.next
breakage has been fixed in the meantime
- Teach objtool to ignore dangling jump table entries added by Clang
-----BEGIN PGP SIGNATURE-----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=fVLM
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Move a warning about a lld.ld breakage into the verbose setting as
said breakage has been fixed in the meantime
- Teach objtool to ignore dangling jump table entries added by Clang
* tag 'objtool_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Move dodgy linker warn to verbose
objtool: Ignore dangling jump table entries
This reverts commit ccfd889acb
The indicated commit
* does not describe the problem that change tries to solve
* has programming issues
* introduces a bug: forever clears NETLBL_SECATTR_MLS_CAT
in (struct smack_known *)skp->smk_netlabel.flags
Reverting the commit to reapproach original problem
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
