mctrl_gpio_free() was added in 2014 by
commit 84130aace8 ("tty/serial: Add GPIOLIB helpers for controlling
modem lines")
It does have a comment saying:
'- * Normally, this function will not be called, as the GPIOs will
- * be disposed of by the resource management code.'
indeed, it doesn't seem to have been used since it was added.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250129020048.245529-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Airoha SoC family have a mostly 16550-compatible UART
and High-Speed UART hardware with the exception of custom
baud rate settings register.
Signed-off-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250119130105.2833517-2-benjamin.larsson@genexis.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UART IP version of the ums9632 SoC project has been upgraded.
UART controller registers have added valid bits to support new features.
In order to distinguish different UART IP versions, we use sc9632-uart
to represent upgraded IP and sc9836-uart to represent old IP.
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250122072352.3663653-1-Wenhua.Lin@unisoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ldsem_down_write_trylock() was added in 2013 by
commit 4898e640ca ("tty: Add timed, writer-prioritized rw semaphore")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250122012559.441006-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The legacy PM hook was never implemented. If we would like to achieve this,
the entire serial subsystem should switch to use runtime PM first. For now,
remove unneeded code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250117141313.592645-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The legacy PM hook was never implemented. If we would like to achieve this,
the entire serial subsystem should switch to use runtime PM first. For now,
remove unneeded code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250117141304.592611-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implements routines to set and get different settings of
the congestion control. This will enable the users to modify
the settings according to their network.
Currently supporting only GEN 0 version of the parameters.
Reading these files queries the firmware and report the values
currently programmed. Writing to the files sends commands that
update the congestion control settings
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1737301535-6599-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Set max_mad_size and IB_PORT_CM_SUP capability
to enable connection manager.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-14-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add polling for the kernel CQs.
Process completion events for UD/GSI QPs.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-13-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Enable mana QP table to store UD/GSI QPs.
For send queues, set the most significant bit to one,
as send and receive WQs can have the same ID in mana.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-12-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement post send and post recv for UD/GSI QPs.
Add information about posted requests into shadow queues.
Co-developed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Signed-off-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-10-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Do not warn on missing pad_data when oob is in sgl.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-9-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement create and destroy AH for kernel.
In mana_ib, AV is passed as an sge in WQE.
Allocate DMA memory and write an AV there.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-8-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement UD/GSI QPs for the kernel.
Allow create/modify/destroy for such QPs.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-7-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement HW requests to create and destroy UD/GSI QPs.
An UD/GSI QP has send and receive queues.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-6-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Introduce helpers to allocate queues for kernel-level use.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1737394039-28772-4-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This message reports a mismatch between new_crtc_state->enable and
has_connectors, which should be either both true or both false. However it
does not mention which one is true and which is false, which can be useful
for debugging. Add the value of both avriables to the log message.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204-drm-small-improvements-v4-2-d6bbc92f12f1@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
UEFI 2.11 introduced EFI_MEMORY_HOT_PLUGGABLE to annotate system memory
regions that are 'cold plugged' at boot, i.e., hot pluggable memory that
is available from early boot, and described as system RAM by the
firmware.
Existing loaders and EFI applications running in the boot context will
happily use this memory for allocating data structures that cannot be
freed or moved at runtime, and this prevents the memory from being
unplugged. Going forward, the new EFI_MEMORY_HOT_PLUGGABLE attribute
should be tested, and memory annotated as such should be avoided for
such allocations.
In the EFI stub, there are a couple of occurrences where, instead of the
high-level AllocatePages() UEFI boot service, a low-level code sequence
is used that traverses the EFI memory map and carves out the requested
number of pages from a free region. This is needed, e.g., for allocating
as low as possible, or for allocating pages at random.
While AllocatePages() should presumably avoid special purpose memory and
cold plugged regions, this manual approach needs to incorporate this
logic itself, in order to prevent the kernel itself from ending up in a
hot unpluggable region, preventing it from being unplugged.
So add the EFI_MEMORY_HOTPLUGGABLE macro definition, and check for it
where appropriate.
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Due to SME currently being disabled when removing the SF8MMx support it
wasn't noticed that there were some stray references in the hwcap table,
delete them.
Fixes: 819935464c ("arm64/hwcap: Describe 2024 dpISA extensions to userspace")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250203-arm64-remove-sf8mmx-v1-1-6f1da3dbff82@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Usually retimers take around 30 to 40ms to exit all devices from
sleep state. Extended wake timeout mechanism helps to give
that additional time.
--v2
-Grant the requested time only if greater than 1ms [Arun/Jani]
-Reframe commit message [Arun]
--v3
-Move the function to drm_core [Dmitry/Jani]
Spec: DP v2.1 Section 3.6.12.3
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122053358.1545039-4-suraj.kandpal@intel.com
Extended wake timeout request helps to give additional
time by reading the DPCD register through which sink requests the
minimal amount of time required to wake the sink up.
Source device shall keep retying the AUX tansaction till the
extended timeout that is being granted for LTTPRs from the
sink device.
--v2
-Add documentation [Dmitry]
Spec: DP v2.1 Section 3.6.12.3
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122053358.1545039-3-suraj.kandpal@intel.com
In one of the renumberings of the GCS hwcap a stray reference to HWCAP2 was
left, fix it.
Reported-by: David Spickett <David.Spickett@arm.com>
Fixes: 7058bf87cd ("arm64/gcs: Document the ABI for Guarded Control Stacks")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250124-arm64-gcs-hwcap-doc-v1-1-fa9368b01ca6@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Commit a3ed4157b7 ("fgraph: Replace fgraph_ret_regs with ftrace_regs")
replaces the config HAVE_FUNCTION_GRAPH_RETVAL with the config
HAVE_FUNCTION_GRAPH_FREGS, and it replaces all the select commands in the
various architecture Kconfig files. In the arm64 architecture, the commit
adds the 'select HAVE_FUNCTION_GRAPH_FREGS', but misses to remove the
'select HAVE_FUNCTION_GRAPH_RETVAL', i.e., the select on the replaced
config.
Remove selecting the replaced config. No functional change, just cleanup.
Fixes: a3ed4157b7 ("fgraph: Replace fgraph_ret_regs with ftrace_regs")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://lore.kernel.org/r/20250117125522.99071-1-lukas.bulwahn@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
Add the missing code to allocate P4D level page tables when cloning the
the kernel page tables. This fixes a crash that may be observed when
attempting to resume from hibernation on an LPA2 capable system with 4k
pages, which therefore uses 5 levels of paging.
Presumably, kexec is equally affected.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250110175145.785702-2-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
The Bspec has been updated to include INITIATE_PM_DMD_REQ in the set of
register offsets that require the DMC wakelock for access during DC5.
Update our table accordingly.
Bspec: 71583
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250203205941.251754-1-gustavo.sousa@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Register 0xd9 was repurposed on new systems. Change its name
to correctly reflect the new functionality.
Reviewed-by: Felix Radensky <fradensky@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250124172632.22437-4-vadimp@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move 'mlx-platform' driver 'x86' to 'mellanox' folder.
Motivation to allow running it on systems with ARM architecture.
Since drivers/platform/x86/mlx-platform.c is rellocated to folder
drivers/platform/x86/, remove "MELLANOX PLATFORM DRIVER" item.
This driver will be located under "MELLANOX HARDWARE PLATFORM SUPPORT"
item.
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250124172632.22437-2-vadimp@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This is just the plumbing between the event source (fs/namespace.c) and the
event consumer (fanotify). In itself it does nothing.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250129165803.72138-2-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit 13b25489b6 ("kbuild: change working directory to external
module directory with M=") changed kbuild working directory of hid-bpf
sample programs to samples/hid, which broke the vmlinux path for
VMLINUX_BTF, as the Makefiles assume the current work directory to be
the kernel output directory and use a relative path (i.e., ./vmlinux):
Makefile:173: *** Cannot find a vmlinux for VMLINUX_BTF at any of " /path/to/linux/samples/hid/vmlinux", build the kernel or set VMLINUX_BTF or VMLINUX_H variable. Stop.
Correctly refer to the kernel output directory using $(objtree).
Fixes: 13b25489b6 ("kbuild: change working directory to external module directory with M=")
Tested-by: Ruowen Qin <ruqin@redhat.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Link: https://patch.msgid.link/20250203085506.220297-4-jinghao7@illinois.edu
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Commit 5a6ea7022f ("samples/bpf: Remove unnecessary -I flags from
libbpf EXTRA_CFLAGS") fixed the build error caused by redundant include
path for samples/bpf, but not samples/hid.
Apply the same fix on samples/hid as well.
Fixes: 13b25489b6 ("kbuild: change working directory to external module directory with M=")
Tested-by: Ruowen Qin <ruqin@redhat.com>
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Link: https://patch.msgid.link/20250203085506.220297-2-jinghao7@illinois.edu
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The CMU_PERIS block is used for clocking the MCT, and has one dependency
clock from CMU_TOP. As the MCT is initialized early, this CMU is also
registered early.
While at it, make the parent clock list comment spaced out correctly,
and add it to the HSI0 block.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://lore.kernel.org/r/20250104-exynos990-cmu-v1-2-9f54d69286d6@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add CMU_PERIS block compatible, and clock definitions.
CMU_PERIS requires one bus clock dependency, and it's used for i.e the MCT.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250104-exynos990-cmu-v1-1-9f54d69286d6@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Raven is Google's code name for Pixel 6 Pro. Similar to Pixel 6
(Oriole), this is also based around its Tensor gs101 SoC.
For now, the relevant difference here is the display resolution:
1440 x 3120 instead of 1080 x 2400.
Create a new board file to reflect this difference.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250117-gs101-simplefb-v4-4-a5b90ca2f917@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In order to support Pixel 6 (Oriole), Pixel 6 Pro (Raven), Pixel 6a
(Bluejay), and all other versions correctly, we have to be able to
distinguish them properly as we add support for more features.
For example, Raven has a larger display. There are other differences,
like battery design capacity, etc.
Move all the parts that are common for now into a
gs101-pixel-common.dtsi, and just leave the display related things in
gs101-oriole.dts.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250117-gs101-simplefb-v4-3-a5b90ca2f917@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The bootloader configures the display hardware for a framebuffer at the
given address, let's add a simple-framebuffer node here until we get a
proper DRM driver.
This has several benefits since it's an OLED display:
* energy consumption goes down significantly, as it changes from white
(as left by bootloader) to black (linux console), and we generally
don't run out of battery anymore when plugged into a USB port
* less of a burn-in effect I assume
* phone stays cooler due to reduced energy consumption by display
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250117-gs101-simplefb-v4-2-a5b90ca2f917@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Raven is Google's code name for Pixel 6 Pro. Since there are
differences compared to Pixel 6 (Oriole), we need to add a separate
compatible for it.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250117-gs101-simplefb-v4-1-a5b90ca2f917@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The documentation previously listed the path to download In Field Scan
(IFS) test images as "TBD".
Update the documentation to include the correct image download
location. Also move the download link to the appropriate section within
the documentation.
Reported-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20250131205315.1585663-1-jithu.joseph@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Among the three files that include pwm-lpss.h only pwm-lpss.c actually
needs <linux/pwm.h>. So move the #include statement from the former to
the latter.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250123103939.357160-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The device tree of RK3568 did not specify reset-names before.
So add fallback to old behaviour to be compatible with old DT.
Fixes: fbcbffbac9 ("phy: rockchip: naneng-combphy: fix phy reset")
Cc: Jianfeng Liu <liujianfeng1994@gmail.com>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250106100001.1344418-2-amadeus@jmu.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
