Move the check for display_irqs_enabled within vlv_display_irq_reset()
and vlv_display_irq_postinstall() to avoid looking at struct
intel_display members within i915 core irq code.
Within display irq code, vlv_display_irq_reset() may need to be called
with !display_irqs_enabled, so add a small wrapper.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ef43e26ebab7f84768391f5053c0eba44b647c89.1732102179.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use the modern style for defining register contents. Expand the status
register contents a bit.
TODO: There are more VC payload mapping fields, spanning more registers,
and have more bits on more recent platforms.
v2:
- Fix DP_TP_STATUS_STREAMS_ENABLED_MASK mask (Imre)
- Drop status VC3 payload mapping for now
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1ef15e6bb58ca847f89c9b39cbc9771cb57db408.1732106557.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If the active performance monitor (`v3d->active_perfmon`) is being
destroyed, stop it first. Currently, the active perfmon is not
stopped during destruction, leaving the `v3d->active_perfmon` pointer
stale. This can lead to undefined behavior and instability.
This patch ensures that the active perfmon is stopped before being
destroyed, aligning with the behavior introduced in commit
7d1fd3638e ("drm/v3d: Stop the active perfmon before being destroyed").
Cc: stable@vger.kernel.org # v5.15+
Fixes: 26a4dc29b7 ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118221948.1758130-1-christian.gmeiner@gmail.com
If iov_iter_zero succeeds after failed copy_from_kernel_nofault,
we need to reset the ret value to zero otherwise it will be returned
as final return value of read_kcore_iter.
This fixes objdump -d dump over /proc/kcore for me.
Cc: stable@vger.kernel.org
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Fixes: 3d5854d75e ("fs/proc/kcore.c: allow translation of physical memory addresses")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20241121231118.3212000-1-jolsa@kernel.org
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
I recently had an fstests hang where there were two internal tasks
stuck like so:
[ 6559.010870] task:kworker/24:45 state:D stack:12152 pid:631308 tgid:631308 ppid:2 flags:0x00004000
[ 6559.016984] Workqueue: xfs-buf/dm-2 xfs_buf_ioend_work
[ 6559.020349] Call Trace:
[ 6559.022002] <TASK>
[ 6559.023426] __schedule+0x650/0xb10
[ 6559.025734] schedule+0x6d/0xf0
[ 6559.027835] schedule_timeout+0x31/0x180
[ 6559.030582] wait_for_common+0x10c/0x1e0
[ 6559.033495] wait_for_completion+0x1d/0x30
[ 6559.036463] __flush_workqueue+0xeb/0x490
[ 6559.039479] ? mempool_alloc_slab+0x15/0x20
[ 6559.042537] xlog_cil_force_seq+0xa1/0x2f0
[ 6559.045498] ? bio_alloc_bioset+0x1d8/0x510
[ 6559.048578] ? submit_bio_noacct+0x2f2/0x380
[ 6559.051665] ? xlog_force_shutdown+0x3b/0x170
[ 6559.054819] xfs_log_force+0x77/0x230
[ 6559.057455] xlog_force_shutdown+0x3b/0x170
[ 6559.060507] xfs_do_force_shutdown+0xd4/0x200
[ 6559.063798] ? xfs_buf_rele+0x1bd/0x580
[ 6559.066541] xfs_buf_ioend_handle_error+0x163/0x2e0
[ 6559.070099] xfs_buf_ioend+0x61/0x200
[ 6559.072728] xfs_buf_ioend_work+0x15/0x20
[ 6559.075706] process_scheduled_works+0x1d4/0x400
[ 6559.078814] worker_thread+0x234/0x2e0
[ 6559.081300] kthread+0x147/0x170
[ 6559.083462] ? __pfx_worker_thread+0x10/0x10
[ 6559.086295] ? __pfx_kthread+0x10/0x10
[ 6559.088771] ret_from_fork+0x3e/0x50
[ 6559.091153] ? __pfx_kthread+0x10/0x10
[ 6559.093624] ret_from_fork_asm+0x1a/0x30
[ 6559.096227] </TASK>
[ 6559.109304] Workqueue: xfs-cil/dm-2 xlog_cil_push_work
[ 6559.112673] Call Trace:
[ 6559.114333] <TASK>
[ 6559.115760] __schedule+0x650/0xb10
[ 6559.118084] schedule+0x6d/0xf0
[ 6559.120175] schedule_timeout+0x31/0x180
[ 6559.122776] ? call_rcu+0xee/0x2f0
[ 6559.125034] __down_common+0xbe/0x1f0
[ 6559.127470] __down+0x1d/0x30
[ 6559.129458] down+0x48/0x50
[ 6559.131343] ? xfs_buf_item_unpin+0x8d/0x380
[ 6559.134213] xfs_buf_lock+0x3d/0xe0
[ 6559.136544] xfs_buf_item_unpin+0x8d/0x380
[ 6559.139253] xlog_cil_committed+0x287/0x520
[ 6559.142019] ? sched_clock+0x10/0x30
[ 6559.144384] ? sched_clock_cpu+0x10/0x190
[ 6559.147039] ? psi_group_change+0x48/0x310
[ 6559.149735] ? _raw_spin_unlock+0xe/0x30
[ 6559.152340] ? finish_task_switch+0xbc/0x310
[ 6559.155163] xlog_cil_process_committed+0x6d/0x90
[ 6559.158265] xlog_state_shutdown_callbacks+0x53/0x110
[ 6559.161564] ? xlog_cil_push_work+0xa70/0xaf0
[ 6559.164441] xlog_state_release_iclog+0xba/0x1b0
[ 6559.167483] xlog_cil_push_work+0xa70/0xaf0
[ 6559.170260] process_scheduled_works+0x1d4/0x400
[ 6559.173286] worker_thread+0x234/0x2e0
[ 6559.175779] kthread+0x147/0x170
[ 6559.177933] ? __pfx_worker_thread+0x10/0x10
[ 6559.180748] ? __pfx_kthread+0x10/0x10
[ 6559.183231] ret_from_fork+0x3e/0x50
[ 6559.185601] ? __pfx_kthread+0x10/0x10
[ 6559.188092] ret_from_fork_asm+0x1a/0x30
[ 6559.190692] </TASK>
This is an ABBA deadlock where buffer IO completion is triggering a
forced shutdown with the buffer lock held. It is waiting for the CIL
to flush as part of the log force. The CIL flush is blocked doing
shutdown processing of all it's objects, trying to unpin a buffer
item. That requires taking the buffer lock....
For the CIL to be doing shutdown processing, the log must be marked
with XLOG_IO_ERROR, but that doesn't happen until after the log
force is issued. Hence for xfs_do_force_shutdown() to be forcing
the log on a shut down log, we must have had a racing
xlog_force_shutdown and xfs_force_shutdown like so:
p0 p1 CIL push
<holds buffer lock>
xlog_force_shutdown
xfs_log_force
test_and_set_bit(XLOG_IO_ERROR)
xlog_state_release_iclog()
sees XLOG_IO_ERROR
xlog_state_shutdown_callbacks
....
xfs_buf_item_unpin
xfs_buf_lock
<blocks on buffer p1 holds>
xfs_force_shutdown
xfs_set_shutdown(mp) wins
xlog_force_shutdown
xfs_log_force
<blocks on CIL push>
xfs_set_shutdown(mp) fails
<shuts down rest of log>
The deadlock can be mitigated by avoiding the log force on the
second pass through xlog_force_shutdown. Do this by adding another
atomic state bit (XLOG_OP_PENDING_SHUTDOWN) that is set on entry to
xlog_force_shutdown() but doesn't mark the log as shutdown.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
I've been seeing this failure on during xfs/050 recently:
XFS: Assertion failed: dst->d_spc_timer != 0, file: fs/xfs/xfs_qm_syscalls.c, line: 435
....
Call Trace:
<TASK>
xfs_qm_scall_getquota_fill_qc+0x2a2/0x2b0
xfs_qm_scall_getquota_next+0x69/0xa0
xfs_fs_get_nextdqblk+0x62/0xf0
quota_getnextxquota+0xbf/0x320
do_quotactl+0x1a1/0x410
__se_sys_quotactl+0x126/0x310
__x64_sys_quotactl+0x21/0x30
x64_sys_call+0x2819/0x2ee0
do_syscall_64+0x68/0x130
entry_SYSCALL_64_after_hwframe+0x76/0x7e
It turns out that the _qmount call has silently been failing to
unmount and mount the filesystem, so when the softlimit is pushed
past with a buffered write, it is not getting synced to disk before
the next quota report is being run.
Hence when the quota report runs, we have 300 blocks of delalloc
data on an inode, with a soft limit of 200 blocks. XFS dquots
account delalloc reservations as used space, hence the dquot is over
the soft limit.
However, we don't update the soft limit timers until we do a
transactional update of the dquot. That is, the dquot sits over the
soft limit without a softlimit timer being started until writeback
occurs and the allocation modifies the dquot and we call
xfs_qm_adjust_dqtimers() from xfs_trans_apply_dquot_deltas() in
xfs_trans_commit() context.
This isn't really a problem, except for this debug code in
xfs_qm_scall_getquota_fill_qc():
if (xfs_dquot_is_enforced(dqp) && dqp->q_id != 0) {
if ((dst->d_space > dst->d_spc_softlimit) &&
(dst->d_spc_softlimit > 0)) {
ASSERT(dst->d_spc_timer != 0);
}
....
It asserts taht if the used block count is over the soft limit,
it *must* have a soft limit timer running. This is clearly not
the case, because we haven't committed the delalloc space to disk
yet. Hence the soft limit is only exceeded temporarily in memory
(which isn't an issue) and we start the timer the moment we exceed
the soft limit in journalled metadata.
This debug was introduced in:
commit 0d5ad8383061fbc0a9804fbb98218750000fe032
Author: Supriya Wickrematillake <sup@sgi.com>
Date: Wed May 15 22:44:44 1996 +0000
initial checkin
quotactl syscall functions.
The very first quota support commit back in 1996. This is zero-day
debug for Irix and, as it turns out, a zero-day bug in the debug
code because the delalloc code on Irix didn't update the softlimit
timers, either.
IOWs, this issue has been in the code for 28 years.
We obviously don't care if soft limit timers are a bit rubbery when
we have delalloc reservations in memory. Production systems running
quota reports have been exposed to this situation for 28 years and
nobody has noticed it, so the debug code is essentially worthless at
this point in time.
We also have the on-disk dquot verifiers checking that the soft
limit timer is running whenever the dquot is over the soft limit
before we write it to disk and after we read it from disk. These
aren't firing, so it is clear the issue is purely a temporary
in-memory incoherency that I never would have noticed had the test
not silently failed to unmount the filesystem.
Hence I'm simply going to trash this runtime debug because it isn't
useful in the slightest for catching quota bugs.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The runt AG at the end of a filesystem is almost always smaller than
the mp->m_sb.sb_agblocks. Unfortunately, when setting the max_agbno
limit for the inode chunk allocation, we do not take this into
account. This means we can allocate a sparse inode chunk that
overlaps beyond the end of an AG. When we go to allocate an inode
from that sparse chunk, the irec fails validation because the
agbno of the start of the irec is beyond valid limits for the runt
AG.
Prevent this from happening by taking into account the size of the
runt AG when allocating inode chunks. Also convert the various
checks for valid inode chunk agbnos to use xfs_ag_block_count()
so that they will also catch such issues in the future.
Fixes: 56d1115c9b ("xfs: allocate sparse inode chunks on full chunk allocation failure")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
VKMS currently supports only one CRTC, so it make no sense to have this
index configurable. To avoid issues, replace this hardcoded index by
drm_crtc_mask when applicable.
There is no need to manually set a crtc mask on primary and cursor plane
as it is automatically set by drmm_crtc_alloc_with_planes.
In addition, this will remove the use of an uninitialized structure in
vkms_add_overlay_plane. This currently works by chance because two things:
- vkms_plane_init always set a possible_crtcs value, so the problematic
branch is never used;
- drm_crtc_mask on an kzalloc'd drm_crtc returns BIT(0), and the VKMS CRTC
always have this id.
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119-vkms-remove-index-v3-1-976321a3f801@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Compat features are new features that older kernels can safely ignore,
allowing read-write mounts without issues. The current sb write validation
implementation returns -EFSCORRUPTED for unknown compat features,
preventing filesystem write operations and contradicting the feature's
definition.
Additionally, if the mounted image is unclean, the log recovery may need
to write to the superblock. Returning an error for unknown compat features
during sb write validation can cause mount failures.
Although XFS currently does not use compat feature flags, this issue
affects current kernels' ability to mount images that may use compat
feature flags in the future.
Since superblock read validation already warns about unknown compat
features, it's unnecessary to repeat this warning during write validation.
Therefore, the relevant code in write validation is being removed.
Fixes: 9e037cb797 ("xfs: check for unknown v5 feature bits in superblock write verifier")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Dividing a 64-bit integer prevents building this for 32-bit targets:
ERROR: modpost: "__aeabi_uldivmod" [drivers/gpu/drm/rockchip/rockchipdrm.ko] undefined!
As this function is not performance criticial, just Use the div_u64() helper.
Fixes: 128a9bf8ac ("drm/rockchip: Add basic RK3588 HDMI output support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20241018151016.3496613-1-arnd@kernel.org
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
(cherry picked from commit 4b64b4a81f)
Signed-off-by: Maxime Ripard <mripard@kernel.org>
xfs_attr_shortform_list() only called from a non-transactional context, it
hold ilock before alloc memory and maybe trapped in memory reclaim. Since
commit 204fae32d5f7("xfs: clean up remaining GFP_NOFS users") removed
GFP_NOFS flag, lockdep warning will be report as [1]. Eliminate lockdep
false positives by use __GFP_NOLOCKDEP to alloc memory
in xfs_attr_shortform_list().
[1] https://lore.kernel.org/linux-xfs/000000000000e33add0616358204@google.com/
Reported-by: syzbot+4248e91deb3db78358a2@syzkaller.appspotmail.com
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The PPC64 specific MMIO setup open codes DT address functions rather
than using standard address parsing functions. The open-coded version
fails to handle any address translation and is not endian safe.
I haven't found any evidence of what platform used this. The only thing
that turned up was a PPC405 platform, but that is 32-bit and PPC405
support is being removed as well. CONFIG_TCG_ATMEL is not enabled for
any powerpc config and never was. The support was added in 2005 and
hasn't been touched since.
Rather than try to modernize and fix this code, just remove it.
[jarkko: fixed couple of style issues reported by checkpatch.pl --strict
and put offset into parentheses in the macro declarations.]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
core:
- split DSC helpers from DP helpers
- clang build fixes for drm/mm test
- drop simple pipeline support for gem vram
- document submission error signaling
- move drm_rect to drm core module from kms helper
- add default client setup to most drivers
- move to video aperture helpers instead of drm ones
tests:
- new framebuffer tests
ttm:
- remove swapped and pinned BOs from TTM lru
panic:
- fix uninit spinlock
- add ABGR2101010 support
bridge:
- add TI TDP158 support
- use standard PM OPS
dma-fence:
- use read_trylock instead of read_lock to help lockdep
scheduler:
- add errno to sched start to report different errors
- add locking to drm_sched_entity_modify_sched
- improve documentation
xe:
- add drm_line_printer
- lots of refactoring
- Enable Xe2 + PES disaggregation
- add new ARL PCI ID
- SRIOV development work
- fix exec unnecessary implicit fence
- define and parse OA sync props
- forcewake refactoring
i915:
- Enable BMG/LNL ultra joiner
- Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+
- use DSB for plane/color mgmt
- Arrow lake PCI IDs
- lots of i915/xe display refactoring
- enable PXP GuC autoteardown
- Pantherlake (PTL) Xe3 LPD display enablement
- Allow fastset HDR infoframe changes
- write DP source OUI for non-eDP sinks
- share PCI IDs between i915 and xe
amdgpu:
- SDMA queue reset support
- SMU 13.0.6, JPEG 4.0.3 updates
- Initial runtime repartitioning support
- rework IP structs for multiple IP instances
- Fetch EDID from _DDC if available
- SMU13 zero rpm user control
- lots of fixes/cleanups
amdkfd:
- Increase event FIFO size
- add topology cap flag for per queue reset
msm:
- DPU:
- SA8775P support
- (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support
- Enable large framebuffer support
- Drop MSM8998 and SDM845
- DP:
- SA8775P support
- GPU:
- a7xx preemption support
- Adreno A663 support
ast:
- warn about unsupported TX chips
ivpu:
- add coredump
- add pantherlake support
rockchip:
- 4K@60Hz display enablement
- generate pll programming tables
panthor:
- add timestamp query API
- add realtime group priority
- add fdinfo support
etnaviv:
- improve handling of DMA address limits
- improve GPU hangcheck
exynos:
- Decon Exynos7870 support
mediatek:
- add OF graph support
omap:
- locking fixes
bochs:
- convert to gem/shmem from simpledrm
v3d:
- support big/super pages
- add gemfs
vc4:
- BCM2712 support refactoring
- add YUV444 format support
udmabuf:
- folio related fixes
nouveau:
- add panic support on nv50+
-----BEGIN PGP SIGNATURE-----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=8cUI
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There's a lot of rework, the panic helper support is being added to
more drivers, v3d gets support for HW superpages, scheduler
documentation, drm client and video aperture reworks, some new
MAINTAINERS added, amdgpu has the usual lots of IP refactors, Intel
has some Pantherlake enablement and xe is getting some SRIOV bits, but
just lots of stuff everywhere.
core:
- split DSC helpers from DP helpers
- clang build fixes for drm/mm test
- drop simple pipeline support for gem vram
- document submission error signaling
- move drm_rect to drm core module from kms helper
- add default client setup to most drivers
- move to video aperture helpers instead of drm ones
tests:
- new framebuffer tests
ttm:
- remove swapped and pinned BOs from TTM lru
panic:
- fix uninit spinlock
- add ABGR2101010 support
bridge:
- add TI TDP158 support
- use standard PM OPS
dma-fence:
- use read_trylock instead of read_lock to help lockdep
scheduler:
- add errno to sched start to report different errors
- add locking to drm_sched_entity_modify_sched
- improve documentation
xe:
- add drm_line_printer
- lots of refactoring
- Enable Xe2 + PES disaggregation
- add new ARL PCI ID
- SRIOV development work
- fix exec unnecessary implicit fence
- define and parse OA sync props
- forcewake refactoring
i915:
- Enable BMG/LNL ultra joiner
- Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+
- use DSB for plane/color mgmt
- Arrow lake PCI IDs
- lots of i915/xe display refactoring
- enable PXP GuC autoteardown
- Pantherlake (PTL) Xe3 LPD display enablement
- Allow fastset HDR infoframe changes
- write DP source OUI for non-eDP sinks
- share PCI IDs between i915 and xe
amdgpu:
- SDMA queue reset support
- SMU 13.0.6, JPEG 4.0.3 updates
- Initial runtime repartitioning support
- rework IP structs for multiple IP instances
- Fetch EDID from _DDC if available
- SMU13 zero rpm user control
- lots of fixes/cleanups
amdkfd:
- Increase event FIFO size
- add topology cap flag for per queue reset
msm:
- DPU:
- SA8775P support
- (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support
- Enable large framebuffer support
- Drop MSM8998 and SDM845
- DP:
- SA8775P support
- GPU:
- a7xx preemption support
- Adreno A663 support
ast:
- warn about unsupported TX chips
ivpu:
- add coredump
- add pantherlake support
rockchip:
- 4K@60Hz display enablement
- generate pll programming tables
panthor:
- add timestamp query API
- add realtime group priority
- add fdinfo support
etnaviv:
- improve handling of DMA address limits
- improve GPU hangcheck
exynos:
- Decon Exynos7870 support
mediatek:
- add OF graph support
omap:
- locking fixes
bochs:
- convert to gem/shmem from simpledrm
v3d:
- support big/super pages
- add gemfs
vc4:
- BCM2712 support refactoring
- add YUV444 format support
udmabuf:
- folio related fixes
nouveau:
- add panic support on nv50+"
* tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel: (1583 commits)
drm/xe/guc: Fix dereference before NULL check
drm/amd: Fix initialization mistake for NBIO 7.7.0
Revert "drm/amd/display: parse umc_info or vram_info based on ASIC"
drm/amd/display: Fix failure to read vram info due to static BP_RESULT
drm/amdgpu: enable GTT fallback handling for dGPUs only
drm/amd/amdgpu: limit single process inside MES
drm/fourcc: add AMD_FMT_MOD_TILE_GFX9_4K_D_X
drm/amdgpu/mes12: correct kiq unmap latency
drm/amdgpu: Support vcn and jpeg error info parsing
drm/amd : Update MES API header file for v11 & v12
drm/amd/amdkfd: add/remove kfd queues on start/stop KFD scheduling
drm/amdkfd: change kfd process kref count at creation
drm/amdgpu: Cleanup shift coding style
drm/amd/amdgpu: Increase MES log buffer to dump mes scratch data
drm/amdgpu: Implement virt req_ras_err_count
drm/amdgpu: VF Query RAS Caps from Host if supported
drm/amdgpu: Add msg handlers for SRIOV RAS Telemetry
drm/amdgpu: Update SRIOV Exchange Headers for RAS Telemetry Support
drm/amd/display: 3.2.309
drm/amd/display: Adjust VSDB parser for replay feature
...
Accept another DID:VID for the next generation Google TPM. This TPM
has the same Ti50 firmware and fulfills the same interface.
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Move i2c locking primitives to request_locality and relinquish_locality
callbacks, what effectively blocks TPM bus for the whole duration of
logical TPM operation.
With this in place, cr50-equipped TPM may be shared with external CPUs -
assuming that underneath i2c controller driver is aware of this setup
(see i2c-designware-amdpsp as an example).
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Instead of using static functions tpm_cr50_request_locality and
tpm_cr50_release_locality register callbacks from tpm class chip->ops
created for this purpose.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Signed-off-by: Grzegorz Bernacki <bernacki@chromium.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Set the TPM_OPS_AUTO_STARTUP on the driver so that the ibmvtpm driver now
uses tpm2_auto_startup and tpm1_auto_startup like many other drivers do.
Remove tpm_get_timeouts, tpm2_get_cc_attrs_tbl, and tpm2_sessions_init
calls from it since these will all be called in tpm2_auto_startup and
tpm1_auto_startup.
The exporting of the tpm2_session_init symbol was only necessary while the
ibmvtpm driver was calling this function. Since this is not the case
anymore, remove this symbol from being exported.
What is new for the ibmvtpm driver is that now tpm2_do_selftest and
tpm1_do_selftest will be called that send commands to the TPM to perform
or continue its selftest. However, the firmware should already have sent
these commands so that the TPM will not do much work at this time.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This is a relatively calm cycle, and majority of changes are about
ASoC. There are little changes in the core side but we received
lots of new drivers for new vendors.
* ALSA Core:
- The new accel operation mode for compress-offload API;
only the core part, and the actual user will follow at next
* ASoC:
- Continued API simplification works
- Renaming of the sh directory to Renesas
- Factoring out of some of the common code for Realtek devices
- Ussal ASoC Intel SOF, AMD and SoundWire updates
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307,
Longsoon I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342,
Qualcomm SM8750, RealTek RT721, and ST Microelectronics STM32MP25
* HD- and USB-audio:
- Clean up of IRQ handling in legacy HD-audio driver
- Fix soft lockup at disconnection of non-standard USB drivers
- Scarlett2 mixer improvements
- New quirks and cleanups in HD- and USB-audio
-----BEGIN PGP SIGNATURE-----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=gOHc
-----END PGP SIGNATURE-----
Merge tag 'sound-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This is a relatively calm cycle, and majority of changes are about
ASoC. There are little changes in the core side but we received lots
of new drivers for new vendors.
ALSA Core:
- The new accel operation mode for compress-offload API; only the
core part, the actual user will follow later
ASoC:
- Continued API simplification works
- Renaming of the sh directory to Renesas
- Factoring out of some of the common code for Realtek devices
- Ussal ASoC Intel SOF, AMD and SoundWire updates
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307,
Longsoon I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342,
Qualcomm SM8750, RealTek RT721, and ST Microelectronics STM32MP25
HD- and USB-audio:
- Clean up of IRQ handling in legacy HD-audio driver
- Fix soft lockup at disconnection of non-standard USB drivers
- Scarlett2 mixer improvements
- New quirks and cleanups in HD- and USB-audio"
* tag 'sound-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (278 commits)
ALSA: hda: Poll jack events for LS7A HD-Audio
ASoC: hdmi-codec: reorder channel allocation list
ALSA: ump: Fix the wrong format specifier
ASoC: Intel: soc-acpi-intel-lnl-match: add rt712_vb + rt1320 support
ASoC: stm32: dfsdm: change rate upper limits
ASoC: sma1307: fix uninitialized variable refence
ASoC: dt-bindings: simple-mux: add idle-state property
ASoc: simple-mux: add idle-state support
ASoC: sdca: test adev before calling acpi_dev_for_each_child
ASoC: SOF: ipc4-topology: remove redundant assignment to variable ret
ASoC: amd: ps: fix the pcm device numbering for acp 6.3 platform
ASoC: amd: acp: add soundwire machine driver for legacy stack
ASoC: amd: acp: move get_acp63_cpu_pin_id() to common file
ASoC: amd: ps: add soundwire machines for acp6.3 platform
ASoC: amd: acp: add RT711, RT714 & RT1316 support for acp 6.3 platform
ASoC: amd: acp: add rt722 based soundwire machines
ALSA: compress_offload: Add missing descriptions in structs
ALSA: 6fire: Release resources at card release
ALSA: caiaq: Use snd_card_free_when_closed() at disconnection
ALSA: us122l: Drop mmap_count field
...
i2c-core (Wolfram)
- drivers can now use a GPIO as a side channel for SMBus Alerts
using a generic binding
- regular stuff like mem leak fix, Makefile maintenance...
i2c-host updates (Andi)
Major Improvements and Refactoring:
- All controllers using the 'remove_new' callback have been
reverted to use the 'remove' callback.
- Intel SCH controller underwent significant refactoring,
this brings love and a modern look to the driver.
- PIIX4 driver refactored to enable usage by other drivers
(e.g., AMD ASF).
- iMX/MXC improved message handling to reduce protocol overhead:
Refactored DMA/non-DMA read/write and bus polling mechanisms
to achieve this.
- ACPI documentation for PIIX4.
New Features:
- i2c-cadence added support for atomic transfers.
- Qualcomm CII added support for a 32MHz serial engine clock.
Deprecated Features:
- Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
somebody misses this, Jean will rewrite support using the proper
i2c mux framework.
New Hardware Support:
- Added support for:
- Intel Panther Lake (new ID)
- AMD ASF (new driver)
- S32G2/S32G3 SoCs (new ID)
- Realtek RTL I2C Controller (new driver)
- HJMC01 DesignWare ACPI HID (new ID)
- PIC64GX to Microchip Core (new ID)
- Qualcomm SDM670 to Qualcomm CCI (new ID)
at24 updates (Bartosz)
- add support for the lockable page on ST M24256E
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmc+/UUACgkQFA3kzBSg
KbZrqA/+MqNiN8NIkgA3nIODQP1Cf/aUhywHITsRgoo85vVDHeiaJtKc25KMi6Tb
I5GgHp9Q0TtYdXzKM+nC7xjO64h8obGRXPHv5fDbRAZlFbWSR8u+iQp9entuVJe4
TiRFh9M8chAC82QNCvYVKx3jTHlmZaR7bXDtoAf7bG0LdWnjey1JSFfn6cPweVNM
0sD95tjBDb53tCRPGVKrCsnrs5uGxugGvH5I16hB6iokbaiIlGosIBg/8YBGHCS8
V8RqLSfzCl7X7xICeRv2ttRWx78Nz38RBC+truR5OEvvdZ+J2UCZ0710/w6FWfPp
F85ReZrG5bh49Jobt/AyC7VXqL6djg+C6jVU1rX8Eb3G6TapL4iCJe9CcI4EXANY
1mtzZ8fqg4EaVMVRQx3tiyjNFWQba9ssSyzRB8ZfCqmS6xV2HXJby3zNoDA9SoxH
tNn3vp0FfOtdn4lGbYAJE4zUMupXiUkrgswj5sKltYjXh/OmaDLJfYeFhPp+SwvW
uWuLZveM0mAn6BWyM4g9v6MIHWiUumkF5xwlAfNOh3ogxqUtAPtbzk7FQ332ni0Z
X11J5EOBzbMQR24moRo7xtQSdoDDSQDpytOVXTY2QWv3rZuk0oVL57aifJdtTkrK
QktmylTfYlfI2hWLRoWFJ1j7nQyBveiNHh/qq0hxCkXLP3vA5gs=
=lrn5
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core:
- drivers can now use a GPIO as a side channel for SMBus Alerts using
a generic binding
- regular stuff like mem leak fix, Makefile maintenance...
Host improvements and refactoring:
- All controllers using the 'remove_new' callback have been reverted
to use the 'remove' callback
- Intel SCH controller underwent significant refactoring, this brings
love and a modern look to the driver
- PIIX4 driver refactored to enable usage by other drivers (e.g., AMD
ASF)
- iMX/MXC improved message handling to reduce protocol overhead:
Refactored DMA/non-DMA read/write and bus polling mechanisms to
achieve this.
- ACPI documentation for PIIX4
New host features:
- i2c-cadence support for atomic transfers
- Qualcomm CII support for a 32MHz serial engine clock
Deprecated features:
- Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
somebody misses this, Jean will rewrite support using the proper
i2c mux framework.
New hardware IDs for existing drivers:
- Intel Panther Lake
- S32G2/S32G3 SoCs
- HJMC01 DesignWare ACPI HID
- PIC64GX to Microchip Core
- Qualcomm SDM670 to Qualcomm CCI
New drivers:
- AMD ASF
- Realtek RTL I2C Controller
at24 updates:
- add support for the lockable page on ST M24256E"
* tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (59 commits)
docs: i2c: piix4: Add ACPI section
i2c: Add driver for the RTL9300 I2C controller
i2c: qcom-cci: Remove unused struct member cci_clk_rate
dt-bindings: i2c: Add Realtek RTL I2C Controller
i2c: busses: Use *-y instead of *-objs in Makefile
i2c: imx: add support for S32G2/S32G3 SoCs
dt-bindings: i2c: imx: add SoC specific compatible strings for S32G
i2c: qcom-cci: Remove the unused variable cci_clk_rate
i2c: Drop legacy muxing pseudo-drivers
i2c: imx: prevent rescheduling in non dma mode
i2c: imx: separate atomic, dma and non-dma use case
i2c: imx: do not poll for bus busy in single master mode
i2c: designware: Add a new ACPI HID for HJMC01 I2C controller
i2c: qcom-geni: Keep comment why interrupts start disabled
dt-bindings: i2c: microchip: corei2c: Add PIC64GX as compatible with driver
i2c: designware: constify abort_sources
i2c: Switch back to struct platform_driver::remove()
i2c: qcom-geni: Support systems with 32MHz serial engine clock
i2c: qcom-cci: Stop complaining about DT set clock rate
dt-bindings: i2c: qcom-cci: Document SDM670 compatible
...
Looks like these got missed when jpeg was split from vcn.
Cancel the jpeg workers rather than vcn workers.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is not necessarily corrupted. When there is RAS fatal error, device
memory access is blocked. Hence vcpu bo cannot be saved to system memory
as in a regular suspend sequence before going for reset. In other full
device reset cases, that gets saved and restored during resume.
v2: Remove redundant code like vcn_v4_0 did
v2: Refine commit message
v3: Drop the volatile
v3: Refine commit message
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the sysfs interface for vcn:
vcn_reset_mask
The interface is read-only and show the resets supported by the IP.
For example, full adapter reset (mode1/mode2/BACO/etc),
soft reset, queue reset, and pipe reset.
V2: the sysfs node returns a text string instead of some flags (Christian)
V2: the sysfs node returns a text string instead of some flags (Christian)
v3: add a generic helper which takes the ring as parameter
and print the strings in the order they are applied (Christian)
check amdgpu_gpu_recovery before creating sysfs file itself,
and initialize supported_reset_types in IP version files (Lijo)
v4: s/sdma/vcn/ in the reset mask setup
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The wait_for_idle signature was changed, but the callers
were not.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reported-by: Michel Dänzer <michel@daenzer.net>
Fixes: 82ae6619a4 ("drm/amdgpu: update the handle ptr in wait_for_idle")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
As per power team, there is no need to impose a lower bound on arcturus
power limit. Any unreasonable limit set will result in frequent
throttling.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Write pointer could be 32-bit or 64-bit. Use the correct size during
initialization.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Those flags are supposed to be kept sorted alphabetically. Unfortunately
it's a constant battle as new flags are added to the end or at random
places. Sort it again.
v2: Include the other non-has_* 1-bit flags in the sort
v3: Add comment to keep flags sorted
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # v1
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241120195710.3447100-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Several new features and uAPI for iommufd:
- IOMMU_IOAS_MAP_FILE allows passing in a file descriptor as the backing
memory for an iommu mapping. To date VFIO/iommufd have used VMA's and
pin_user_pages(), this now allows using memfds and memfd_pin_folios().
Notably this creates a pure folio path from the memfd to the iommu page
table where memory is never broken down to PAGE_SIZE.
- IOMMU_IOAS_CHANGE_PROCESS moves the pinned page accounting between two
processes. Combined with the above this allows iommufd to support a VMM
re-start using exec() where something like qemu would exec() a new
version of itself and fd pass the memfds/iommufd/etc to the new
process. The memfd allows DMA access to the memory to continue while
the new process is getting setup, and the CHANGE_PROCESS updates all
the accounting.
- Support for fault reporting to userspace on non-PRI HW, such as ARM
stall-mode embedded devices.
- IOMMU_VIOMMU_ALLOC introduces the concept of a HW/driver backed virtual
iommu. This will be used by VMMs to access hardware features that are
contained with in a VM. The first use is to inform the kernel of the
virtual SID to physical SID mapping when issuing SID based invalidation
on ARM. Further uses will tie HW features that are directly accessed by
the VM, such as invalidation queue assignment and others.
- IOMMU_VDEVICE_ALLOC informs the kernel about the mapping of virtual
device to physical device within a VIOMMU. Minimially this is used to
translate VM issued cache invalidation commands from virtual to physical
device IDs.
- Enhancements to IOMMU_HWPT_INVALIDATE and IOMMU_HWPT_ALLOC to work with
the VIOMMU
- ARM SMMuv3 support for nested translation. Using the VIOMMU and VDEVICE
the driver can model this HW's behavior for nested translation. This
includes a shared branch from Will.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZzzKKwAKCRCFwuHvBreF
YaCMAQDOQAgw87eUYKnY7vFodlsTUA2E8uSxDmk6nPWySd0NKwD/flOP85MdEs9O
Ot+RoL4/J3IyNH+eg5kN68odmx4mAw8=
=ec8x
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Several new features and uAPI for iommufd:
- IOMMU_IOAS_MAP_FILE allows passing in a file descriptor as the
backing memory for an iommu mapping. To date VFIO/iommufd have used
VMA's and pin_user_pages(), this now allows using memfds and
memfd_pin_folios(). Notably this creates a pure folio path from the
memfd to the iommu page table where memory is never broken down to
PAGE_SIZE.
- IOMMU_IOAS_CHANGE_PROCESS moves the pinned page accounting between
two processes. Combined with the above this allows iommufd to
support a VMM re-start using exec() where something like qemu would
exec() a new version of itself and fd pass the memfds/iommufd/etc
to the new process. The memfd allows DMA access to the memory to
continue while the new process is getting setup, and the
CHANGE_PROCESS updates all the accounting.
- Support for fault reporting to userspace on non-PRI HW, such as ARM
stall-mode embedded devices.
- IOMMU_VIOMMU_ALLOC introduces the concept of a HW/driver backed
virtual iommu. This will be used by VMMs to access hardware
features that are contained with in a VM. The first use is to
inform the kernel of the virtual SID to physical SID mapping when
issuing SID based invalidation on ARM. Further uses will tie HW
features that are directly accessed by the VM, such as invalidation
queue assignment and others.
- IOMMU_VDEVICE_ALLOC informs the kernel about the mapping of virtual
device to physical device within a VIOMMU. Minimially this is used
to translate VM issued cache invalidation commands from virtual to
physical device IDs.
- Enhancements to IOMMU_HWPT_INVALIDATE and IOMMU_HWPT_ALLOC to work
with the VIOMMU
- ARM SMMuv3 support for nested translation. Using the VIOMMU and
VDEVICE the driver can model this HW's behavior for nested
translation. This includes a shared branch from Will"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (51 commits)
iommu/arm-smmu-v3: Import IOMMUFD module namespace
iommufd: IOMMU_IOAS_CHANGE_PROCESS selftest
iommufd: Add IOMMU_IOAS_CHANGE_PROCESS
iommufd: Lock all IOAS objects
iommufd: Export do_update_pinned
iommu/arm-smmu-v3: Support IOMMU_HWPT_INVALIDATE using a VIOMMU object
iommu/arm-smmu-v3: Allow ATS for IOMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Use S2FWB for NESTED domains
iommu/arm-smmu-v3: Support IOMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Support IOMMU_VIOMMU_ALLOC
Documentation: userspace-api: iommufd: Update vDEVICE
iommufd/selftest: Add vIOMMU coverage for IOMMU_HWPT_INVALIDATE ioctl
iommufd/selftest: Add IOMMU_TEST_OP_DEV_CHECK_CACHE test command
iommufd/selftest: Add mock_viommu_cache_invalidate
iommufd/viommu: Add iommufd_viommu_find_dev helper
iommu: Add iommu_copy_struct_from_full_user_array helper
iommufd: Allow hwpt_id to carry viommu_id for IOMMU_HWPT_INVALIDATE
iommu/viommu: Add cache_invalidate to iommufd_viommu_ops
iommufd/selftest: Add IOMMU_VDEVICE_ALLOC test coverage
iommufd/viommu: Add IOMMUFD_OBJ_VDEVICE and IOMMU_VDEVICE_ALLOC ioctl
...
- improve the DMA API tracing code (Sean Anderson)
- misc cleanups (Christoph Hellwig, Sui Jingfeng)
- fix pointer abuse when finding the shared DMA pool (Geert Uytterhoeven)
- fix a deadlock in dma-debug (Levi Yun)
-----BEGIN PGP SIGNATURE-----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=ivZc
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.13-2024-11-19' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- improve the DMA API tracing code (Sean Anderson)
- misc cleanups (Christoph Hellwig, Sui Jingfeng)
- fix pointer abuse when finding the shared DMA pool (Geert
Uytterhoeven)
- fix a deadlock in dma-debug (Levi Yun)
* tag 'dma-mapping-6.13-2024-11-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: save base/size instead of pointer to shared DMA pool
dma-mapping: fix swapped dir/flags arguments to trace_dma_alloc_sgt_err
dma-mapping: drop unneeded includes from dma-mapping.h
dma-mapping: trace more error paths
dma-mapping: use trace_dma_alloc for dma_alloc* instead of using trace_dma_map
dma-mapping: trace dma_alloc/free direction
dma-mapping: use macros to define events in a class
dma-mapping: remove an outdated comment from dma-map-ops.h
dma-debug: remove DMA_API_DEBUG_SG
dma-debug: store a phys_addr_t in struct dma_debug_entry
dma-debug: fix a possible deadlock on radix_lock
The kprobes_test suite's test_stacktrace_on_nested_kretprobe() test
currently fails on arm64, e.g.
| KTAP version 1
| 1..1
| KTAP version 1
| # Subtest: kprobes_test
| # module: test_kprobes
| 1..7
| ok 1 test_kprobe
| ok 2 test_kprobes
| ok 3 test_kprobe_missed
| ok 4 test_kretprobe
| ok 5 test_kretprobes
| ok 6 test_stacktrace_on_kretprobe
| # test_stacktrace_on_nested_kretprobe: EXPECTATION FAILED at lib/test_kprobes.c:327
| Expected stack_buf[i + 1] == target_return_address[1], but
| stack_buf[i + 1] == -96519936577004 (0xffffa83733777214)
| target_return_address[1] == -96519936577136 (0xffffa83733777190)
| # test_stacktrace_on_nested_kretprobe: EXPECTATION FAILED at lib/test_kprobes.c:338
| Expected stack_buf[1] == target_return_address[1], but
| stack_buf[1] == -96519936577004 (0xffffa83733777214)
| target_return_address[1] == -96519936577136 (0xffffa83733777190)
| not ok 7 test_stacktrace_on_nested_kretprobe
| # kprobes_test: pass:6 fail:1 skip:0 total:7
| # Totals: pass:6 fail:1 skip:0 total:7
| not ok 1 kprobes_test
The test assumes that when a stacktrace straddles an exception boundary,
no necessary entries will be omitted and no extraneous entries will be
reported, and when unwinding from a kretprobed callee, the next entry in
the trace will be its immediate caller (whether kretprobed or not).
Recently the arm64 stacktrace code was changed to always report the LR
at an exception boundary, where we don't know whether the LR is live.
In the case of the kretprobe trampoline the LR is not live at the time
the stacktrace is performed, and so the entry in the trace for the LR is
extraneous. This can be seen if a call to show_stack() is added to
stacktrace_internal_return_handler():
| Call trace:
| show_stack+0x18/0x30 (C)
| stacktrace_internal_return_handler+0x130/0x43c
| __kretprobe_trampoline_handler+0xa0/0x130
| kretprobe_breakpoint_handler+0x50/0x70
| call_break_hook+0x74/0x8c
| brk_handler+0x1c/0x60
| do_debug_exception+0x68/0x114
| el1_dbg+0x70/0x94
| el1h_64_sync_handler+0xc4/0xe4
| el1h_64_sync+0x6c/0x70
| kprobe_stacktrace_target+0x34/0x48 (P)
| kprobe_stacktrace_target+0x34/0x48 (LK) <-------- extra entry here
| kprobe_stacktrace_driver+0x24/0x40 (K)
| test_stacktrace_on_nested_kretprobe+0x84/0x160
| kunit_try_run_case+0x6c/0x160
| kunit_generic_run_threadfn_adapter+0x28/0x4c
| kthread+0x110/0x114
| ret_from_fork+0x10/0x20
This breaks test_stacktrace_on_nested_kretprobe() because while the
caller (kprobe_stacktrace_driver()) appears in the trace, it doesn't
occur *immediately* after the first instance of callee
(kprobe_stacktrace_target()).
While this behaviour is unfortunate for the kretprobes tests, the
behaviour is desirable elsewhere (e.g. anywhere a human will read the
trace), and is otherwise not harmful.
For the moment, deselect ARCH_CORRECT_STACKTRACE_ON_KRETPROBE on arm64
to disable the tests which depend on this behaviour. With
ARCH_CORRECT_STACKTRACE_ON_KRETPROBE deselected, the remaining tests
work as expected, e.g.
| KTAP version 1
| 1..1
| KTAP version 1
| # Subtest: kprobes_test
| # module: test_kprobes
| 1..5
| ok 1 test_kprobe
| ok 2 test_kprobes
| ok 3 test_kprobe_missed
| ok 4 test_kretprobe
| ok 5 test_kretprobes
| # kprobes_test: pass:5 fail:0 skip:0 total:5
| # Totals: pass:5 fail:0 skip:0 total:5
| ok 1 kprobes_test
In future we have several options to improve matters, e.g.
* Add metadata and update arm64's unwinder to skip the LR in this case.
This is likely to happen as part of work for RELIABLE_STACKTRACE for
other reasons, and might solve this case by coincidence.
* Modify the kretprobes tests to only require that the caller appears in
the trace after the callee, rather than requiring that it is
*immediately* after the callee. We might want separate
strict/not-strict options for this.
* Use reliable stacktrace for these tests, so that architectures which
cannot unwind across exception boundaries can explicitly handle this
by returning an error.
Fixes: c2c6b27b5a ("arm64: stacktrace: unwind exception boundaries")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Kristina Martsenko <kristina.martsenko@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Puranjay Mohan <puranjay12@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241118120204.3961548-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>