When building for streaming SVE the irritator for SVE skips updates of both
P0 and FFR. While FFR is skipped since it might not be present there is no
reason to skip corrupting P0 so switch to an instruction valid in streaming
mode and move the ifdef.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-3-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add the I2C controllers that are part of the RTL9300 SoC.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The board level reset on systems using the RTL9302 can be driven via the
switch. Use a syscon-reboot node to represent this.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
A significant number of 3A4000 machines come with NVMe drives
pre-installed, so we should support it in its defconfig.
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Due to long-term changes in kernel build configurations,
run 'make savedefconfig' to update the build configuration
dependencies.
This commit does not affect the actual .config file content,
in preparation for future modifications to loongson3_defconfig.
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
DEFINE_RES_IRQ returns struct resource type, so it is
unnecessary to cast it to struct resource.
Remove the unnecessary cast to fix the following sparse warnings:
drivers/acpi/arm64/gtdt.c:355:19: sparse: warning: cast to non-scalar
drivers/acpi/arm64/gtdt.c:355:19: sparse: warning: cast from non-scalar
No functional changes intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240917233827.73167-1-minhuadotchen@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The linux-mips.org site has gone down and no replacement is available at
the moment. Remove/update references in MAINTAINERS accordingly. There
are a bunch of Kconfig references still present; keep them around for a
possible future update or for people to refer to via archive.org.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Ralf Baechle has been inactive for years now and the linux-mips.org site
has gone down. No replacement contact information is available. Thomas
has been kind enough to step up as a maintainer for EDAC-CAVIUM OCTEON
and IOC3 ETHERNET DRIVER.
Update MAINTAINERS, CREDITS, and .get_maintainer.ignore accordingly.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Convert the Spreadtrum SC27xx PMIC bindings to DT schema. Adjust the
filename to match the compatible of the only in-tree user, SC2731.
Change #interrupt-cells value to 1, as according to [1] that is the
correct value.
Move partial examples of child nodes in the child node schemas to this new
MFD schema to have one complete example.
[1] https://lore.kernel.org/lkml/b6a32917d1e231277d240a4084bebb6ad91247e3.1550060544.git.baolin.wang@linaro.org/
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Link: https://lore.kernel.org/r/efd200c3b5b75405e4e450d064b026f10ae2f8e0.1730709384.git.stano.jakubek@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The format specifier of "unsigned int" in pr_info()
should be "%u", not "%d".
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The i2c-ocores controller can run in interrupt mode on tqmx86 modules.
Add a module parameter to allow configuring the IRQ number, similar to the
handling of the GPIO IRQ.
The new code and module parameter refer to the I2C controller as "I2C1",
as the TQMx86 PLD actually contains a second I2C controller, for which
driver support will be added in the future.
Signed-off-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/c1b0769e00a8a4e463cffe725e939b0e5c2992c8.1731325758.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
GPIO IRQ setup can fail either because an invalid IRQ was passed as a
parameter, or because the GPIO controller does not support interrupts.
Neither is severe enough to stop the whole probe; simply disable IRQ
support in the GPIO resource when setup fails.
The code is made a bit more robust by introduing an enum for the
resource list indices instead of assuming that the IRQ is at index 0.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/2b5522362098d54c6203be6da95bbc545a21fd49.1731325758.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
Move IRQ setup into a helper function. The string "GPIO" for error
messages is replaced with a label argument to prepare for reusing the
function for the I2C IRQ.
No functional change intended.
Co-developed-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/97f481334f480a113b7076e76f994e0e73ee5aa5.1731325758.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
Remove hard-coded strings by using the str_yes_no() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
pgprot_t has been defined as an encapsulated structure with pteval_t as its
element. Hence it is prudent to use pteval_t as the type instead of via the
size based u64. Besides pteval_t type might be different size later on with
FEAT_D128.
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20241111075249.609493-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Where RCU is watching is where it is OK to invoke rcu_read_lock().
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit creates a new srcu-lite option for the refscale.scale_type
module parameter that selects srcu_read_lock_lite() and
srcu_read_unlock_lite().
[ paulmck: Apply Dan Carpenter feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <bpf@vger.kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit adds an rcutorture scenario that tests light-weight SRCU
readers. While in the area, it adjusts the size of the TREE10 scenario.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <bpf@vger.kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit causes bit 0x4 of rcutorture.reader_flavor to select the new
srcu_read_lock_lite() and srcu_read_unlock_lite() functions.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <bpf@vger.kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit adds an rcutorture.reader_flavor parameter whose bits
correspond to reader flavors. For example, SRCU's readers are 0x1 for
normal and 0x2 for NMI-safe.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <bpf@vger.kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit prepares for testing of multiple SRCU reader flavors by
expanding RCUTORTURE_RDR_MASK_1 and RCUTORTURE_RDR_MASK_2 from a single
bit to eight bits, allowing them to accommodate the return values from
multiple calls to srcu_read_lock*(). This will in turn permit better
testing coverage for these SRCU reader flavors, including testing of
the diagnostics for inproper use of mixed reader flavors.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <bpf@vger.kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit moves __srcu_read_lock_lite() and __srcu_read_unlock_lite()
into include/linux/srcu.h and marks them "static inline" so that they
can be inlined into srcu_read_lock_lite() and srcu_read_unlock_lite(),
respectively. They are not hand-inlined due to Tree SRCU and Tiny SRCU
having different implementations.
The earlier removal of smp_mb() combined with the inlining produce
significant single-percentage performance wins.
Link: https://lore.kernel.org/all/CAEf4BzYgiNmSb=ZKQ65tm6nJDi1UX2Gq26cdHSH1mPwXJYZj5g@mail.gmail.com/
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <bpf@vger.kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This patch adds srcu_read_lock_lite() and srcu_read_unlock_lite(), which
dispense with the read-side smp_mb() but also are restricted to code
regions that RCU is watching. If a given srcu_struct structure uses
srcu_read_lock_lite() and srcu_read_unlock_lite(), it is not permitted
to use any other SRCU read-side marker, before, during, or after.
Another price of light-weight readers is heavier weight grace periods.
Such readers mean that SRCU grace periods on srcu_struct structures
used by light-weight readers will incur at least two calls to
synchronize_rcu(). In addition, normal SRCU grace periods for
light-weight-reader srcu_struct structures never auto-expedite.
Note that expedited SRCU grace periods for light-weight-reader
srcu_struct structures still invoke synchronize_rcu(), not
synchronize_srcu_expedited(). Something about wishing to keep
the IPIs down to a dull roar.
The srcu_read_lock_lite() and srcu_read_unlock_lite() functions may not
(repeat, *not*) be used from NMI handlers, but if this is needed, an
additional flavor of SRCU reader can be added by some future commit.
[ paulmck: Apply Alexei Starovoitov expediting feedback. ]
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: kernel test robot <oliver.sang@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <bpf@vger.kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit creates SRCU_READ_FLAVOR_NORMAL and SRCU_READ_FLAVOR_NMI
C-preprocessor macros for srcu_read_lock() and srcu_read_lock_nmisafe(),
respectively. These replace the old true/false values that were
previously passed to srcu_check_read_flavor(). In addition, the
srcu_check_read_flavor() function itself requires a bit of rework to
handle bitmasks instead of true/false values.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <bpf@vger.kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit adds some additional usage constraints to the kernel-doc
headers of srcu_read_lock() and srcu_read_lock_nmi_safe().
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Currently, there are only two flavors of readers, normal and NMI-safe.
Very straightforward state updates suffice to check for erroneous
mixing of reader flavors on a given srcu_struct structure. This commit
upgrades the checking in preparation for the addition of light-weight
(as in memory-barrier-free) readers.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <bpf@vger.kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Currently, there are only two flavors of readers, normal and NMI-safe.
A number of fields, functions, and types reflect this restriction.
This renaming-only commit prepares for the addition of light-weight
(as in memory-barrier-free) readers. OK, OK, there is also a drive-by
white-space fixeup!
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <bpf@vger.kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Clevo platform with ALC255 Headset Mic was disable by default.
Assigned verb table for Mic pin will enable it.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/b2dcac3e09ef4f82b36d6712194e1ea4@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Compiling the child_cleanup() function results in:
gcs-stress.c: In function ‘child_cleanup’:
gcs-stress.c:266:75: warning: format ‘%d’ expects a matching ‘int’ argument [-Wformat=]
266 | ksft_print_msg("%s: Exited due to signal %d\n",
| ~^
| |
| int
Add the missing child->exit_signal argument.
Fixes: 05e6cfff58 ("kselftest/arm64: Add a GCS stress test")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch switches the P-125 quirk entry to use a composite quirk as the
P-125 supplies both MIDI and Audio like many of the other Yamaha
keyboards
Signed-off-by: Eryk Zagorski <erykzagorski@gmail.com>
Link: https://patch.msgid.link/20241111164520.9079-2-erykzagorski@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The `rust_print` module, when built as a module, fails to build with:
ERROR: modpost: missing MODULE_LICENSE() in samples/rust/rust_print_events.o
ERROR: modpost: "__tracepoint_rust_sample_loaded" [samples/rust/rust_print.ko] undefined!
ERROR: modpost: "rust_do_trace_rust_sample_loaded" [samples/rust/rust_print.ko] undefined!
Fix it by building it as a combined one.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Trevor Gross <tmgross@umich.edu>
Cc: "Linux Next Mailing List" <linux-next@vger.kernel.org>
Link: https://lore.kernel.org/20241111220805.708889-1-ojeda@kernel.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20241108152149.28459a72@canb.auug.org.au/
Fixes: 91d39024e1 ("rust: samples: add tracepoint to Rust sample")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This is the third amlogic driver. The RTC hardware of A4 SoC is different
from the previous one. This RTC hardware includes a timing function and
an alarm function. But the existing has only timing function, alarm
function is using the system clock to implement a virtual alarm. Add
the RTC driver to support it.
Signed-off-by: Yiting Deng <yiting.deng@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20241112-rtc-v6-2-a71b60d2f354@amlogic.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This selects the THREAD_INFO_IN_TASK option for UM and changes the way
that the current task is discovered. This is trivial though, as UML
already tracks the current task in cpu_tasks[] and this can be used to
retrieve it.
Also remove the signal handler code that copies the thread information
into the IRQ stack. It is obsolete now, which also means that the
mentioned race condition cannot happen anymore.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Hajime Tazaki <thehajime@gmail.com>
Link: https://patch.msgid.link/20241111102910.46512-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This allows exporting this high-level interface only while keeping
wbc_attach_and_unlock_inode private in fs-writeback.c and unexporting
__inode_attach_wb.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241112054403.1470586-3-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This shuts up a sparse lock context tracking warning.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241112054403.1470586-2-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
/proc/self/mountinfo prints out the sb->s_subtype after the type. This
is particularly useful for disambiguating FUSE mounts (at least when the
userland driver bothers to set it). Add STATMOUNT_FS_SUBTYPE and claim
one of the __spare2 fields to point to the offset into the str[] array.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ian Kent <raven@themaw.net>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241111-statmount-v4-2-2eaf35d07a80@kernel.org
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When one of the statmount_string() handlers doesn't emit anything to
seq, the kernel currently sets the corresponding flag and emits an empty
string.
Given that statmount() returns a mask of accessible fields, just leave
the bit unset in this case, and skip any NULL termination. If nothing
was emitted to the seq, then the EOVERFLOW and EAGAIN cases aren't
applicable and the function can just return immediately.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241111-statmount-v4-1-2eaf35d07a80@kernel.org
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The comment suggests a hash or array approach to
store the active requests. Currently it iterates
through all the active requests and when found
deletes the requested request, in the linked list.
However io_cancel() isn’t a frequently used operation,
and optimizing it wouldn’t bring a substantial benefit
to real users and the increased complexity of maintaining
a hashtable for this would be significant and will slow
down other operation. Therefore remove this TODO
to avoid people spending time improving this.
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Link: https://lore.kernel.org/r/20241112113906.15825-1-pvmohammedanees2003@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add coverage for FPMR to fp-ptrace. FPMR can be available independently of
SVE and SME, if SME is supported then FPMR is cleared by entering and
exiting streaming mode. As with other registers we generate random values
to load into the register, we restrict these to bitfields which are always
defined. We also leave bitfields where the valid values are affected by
the set of supported FP8 formats zero to reduce complexity, it is unlikely
that specific bitfields will be affected by ptrace issues.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-3-250b57c61254@kernel.org
[catalin.marinas@arm.com: use REG_FPMR instead of FPMR]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently our test for implementable ZA writes is written in a bit of a
convoluted fashion which excludes all changes where we clear SVCR.SM even
though we can actually support that since changing the vector length resets
SVCR. Make the logic more direct, enabling us to actually run these cases.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-2-250b57c61254@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The assembler portions of fp-ptrace are passed feature flags by the C code
indicating which architectural features are supported. Currently these use
an entire register for each flag which is wasteful and gets cumbersome as
new flags are added. Switch to using flag bits in a single register to make
things easier to maintain.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-1-250b57c61254@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>