This is a preparation patch for NVMeOF target reservation
commands implantation.
Add the defines of reservation command, such as reservation log
and sub operations.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The ionic_setup_one() creates a debugfs entry for ionic upon
successful execution. However, the ionic_probe() does not
release the dentry before returning, resulting in a memory
leak.
To fix this bug, we add the ionic_debugfs_del_dev() to release
the resources in a timely manner before returning.
Fixes: 0de38d9f1d ("ionic: extract common bits from ionic_probe")
Signed-off-by: Wentao Liang <Wentao_liang_g@163.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20241107021756.1677-1-liangwentao@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a call gets aborted (e.g. because kafs saw a signal) between it being
queued for connection and the I/O thread picking up the call, the abort
will be prioritised over the connection and it will be removed from
local->new_client_calls by rxrpc_disconnect_client_call() without a lock
being held. This may cause other calls on the list to disappear if a race
occurs.
Fix this by taking the client_call_lock when removing a call from whatever
list its ->wait_link happens to be on.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Fixes: 9d35d880e0 ("rxrpc: Move client call connection to the I/O thread")
Link: https://patch.msgid.link/726660.1730898202@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SMC-R variant of the SMC protocol used direct call to function
ib_device_ops.get_netdev() to lookup netdev. As we used mlx5 device
driver to run SMC-R, it failed to find a device, because in mlx5_ib the
internal net device management for retrieving net devices was replaced
by a common interface ib_device_get_netdev() in commit 8d159eb211
("RDMA/mlx5: Use IB set_netdev and get_netdev functions").
Since such direct accesses to the internal net device management is not
recommended at all, update the SMC-R code to use proper API
ib_device_get_netdev().
Fixes: 54903572c2 ("net/smc: allow pnetid-less configuration")
Reported-by: Aswin K <aswin@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://patch.msgid.link/20241106082612.57803-1-wenjia@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 0fe881f10c ("perf jevents: Autogenerate empty-pmu-events.c")
build will generate two files, add them to .gitignore:
tools/perf/pmu-events/empty-pmu-events.log
tools/perf/pmu-events/test-empty-pmu-events.c
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241106121254.2869-1-haiyuewa@163.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
event_format__print() last use was removed by 2017's
commit 894f3f1732 ("perf script: Use event_format__fprintf()")
evlist__find_tracepoint_by_id() last use was removed by 2012's
commit e60fc847ce ("perf evlist: Remove some unused methods")
evlist__set_tp_filter_pid() last use was removed by 2017's
commit dd1a50377c ("perf trace: Introduce filter_loop_pids()")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241106144826.91728-1-linux@treblig.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
TDX 1.0 defines baseline behaviour of TDX guest platform. TDX 1.0
generates a #VE when accessing topology-related CPUID leafs (0xB and
0x1F) and the X2APIC_APICID MSR. The kernel returns all zeros on CPUID
topology. In practice, this means that the kernel can only boot with a
plain topology. Any complications will cause problems.
The ENUM_TOPOLOGY feature allows the VMM to provide topology
information to the guest. Enabling the feature eliminates
topology-related #VEs: the TDX module virtualizes accesses to
the CPUID leafs and the MSR.
Enable ENUM_TOPOLOGY if it is available.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-5-kirill.shutemov%40linux.intel.com
Memory access #VEs are hard for Linux to handle in contexts like the
entry code or NMIs. But other OSes need them for functionality.
There's a static (pre-guest-boot) way for a VMM to choose one or the
other. But VMMs don't always know which OS they are booting, so they
choose to deliver those #VEs so the "other" OSes will work. That,
unfortunately has left us in the lurch and exposed to these
hard-to-handle #VEs.
The TDX module has introduced a new feature. Even if the static
configuration is set to "send nasty #VEs", the kernel can dynamically
request that they be disabled. Once they are disabled, access to private
memory that is not in the Mapped state in the Secure-EPT (SEPT) will
result in an exit to the VMM rather than injecting a #VE.
Check if the feature is available and disable SEPT #VE if possible.
If the TD is allowed to disable/enable SEPT #VEs, the ATTR_SEPT_VE_DISABLE
attribute is no longer reliable. It reflects the initial state of the
control for the TD, but it will not be updated if someone (e.g. bootloader)
changes it before the kernel starts. Kernel must check TDCS_TD_CTLS bit to
determine if SEPT #VEs are enabled or disabled.
[ dhansen: remove 'return' at end of function ]
Fixes: 373e715e31 ("x86/tdx: Panic on bad configs that #VE on "private" memory access")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-4-kirill.shutemov%40linux.intel.com
Rename tdx_parse_tdinfo() to tdx_setup() and move setting NOTIFY_ENABLES
there.
The function will be extended to adjust TD configuration.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-3-kirill.shutemov%40linux.intel.com
The TDG_VM_WR TDCALL is used to ask the TDX module to change some
TD-specific VM configuration. There is currently only one user in the
kernel of this TDCALL leaf. More will be added shortly.
Refactor to make way for more users of TDG_VM_WR who will need to modify
other TD configuration values.
Add a wrapper for the TDG_VM_RD TDCALL that requests TD-specific
metadata from the TDX module. There are currently no users for
TDG_VM_RD. Mark it as __maybe_unused until the first user appears.
This is preparation for enumeration and enabling optional TD features.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-2-kirill.shutemov%40linux.intel.com
Currently in fp-stress we test signal delivery to the test threads by
sending SIGUSR2 which simply counts how many signals are delivered. The
test programs now also all have a SIGUSR1 handler which for the threads
doing userspace testing additionally modifies the floating point register
state in the signal handler, verifying that when we return the saved
register state is restored from the signal context as expected. Switch over
to triggering that to validate that we are restoring as expected.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-6-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The other stress test programs provide a SIGUSR1 handler which modifies the
live register state in order to validate that signal context is being
restored during signal return. While we can't usefully do this when testing
kernel mode FP usage provide a handler for SIGUSR1 which just counts the
number of signals like we do for SIGUSR2, allowing fp-stress to treat all
the test programs uniformly.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-5-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we don't use the irritator signal in our floating point stress
tests so when we added ZA and ZT stress tests we didn't actually bother
implementing any actual action in the handlers, we just counted the signal
deliveries. In preparation for using the irritators let's implement them,
just trivially SMSTOP and SMSTART to reset all bits in the register to 0.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-4-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The irritator handlers for the fp-stress test programs all use ADR to load
an address into x0 which is then not referenced. Remove these ADRs as they
just cause confusion.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-2-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The comments in the handlers for the irritator signal in the test threads
for fp-stress suggest that the irritator will corrupt the register state
observed by the main thread but this is not the case, instead the FPSIMD
and SVE irritators (which are the only ones that are implemented) modify
the current register state which is expected to be overwritten on return
from the handler by the saved register state. Update the comment to reflect
what the handler is actually doing.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-1-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Erik Schumacher found and fixed a problem in the calculation of the PWM
period setting yielding too long periods. Trevor Gamblin---who already
cared about mainlining the pwm-axi-pwmgen driver---stepped forward as an
additional reviewer.
Thanks to Erik and Trevor.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmcsghcACgkQj4D7WH0S
/k5+rwf9EQq0tGE7yoXdCz1s/YEwp3XadWW9jYAUiRip4bxxzSZeav435RdyVy6O
aSUifvm2MrlEjSMmRSGoOBnwSRHA6XwEeZKB4jh2CLaWklLwqOdCYA5Cyabup2Zn
Z0Kzs3jAaw/y4v6gB9sCO5bj47KY6px1XGn8dqMHrVDJvfTWz9PMUOPFyaCtR9Ov
Y9DVD2XTIZ2v6z0WHMLiMrYAqBgGxsqZTZTUs+cVBnGDDyKjD8SZNdk9vrxGoerw
yoQ8iljNLPPmz3iKELJh5IJhY5Nj5hVlzhFm7QSAlhIOFzxtCaDpwMyRUNEeYVjt
0+HumDC5X6MUBwgdFB55Ra3Nw+H3dg==
=QzWj
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix period setting in imx-tpm driver and a maintainer update
Erik Schumacher found and fixed a problem in the calculation of the
PWM period setting yielding too long periods. Trevor Gamblin - who
already cared about mainlining the pwm-axi-pwmgen driver - stepped
forward as an additional reviewer.
Thanks to Erik and Trevor"
* tag 'pwm/for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
MAINTAINERS: add self as reviewer for AXI PWM GENERATOR
pwm: imx-tpm: Use correct MODULO value for EPWM mode
seq_printf is costy, on a system with n CPUs, reading /proc/softirqs
would yield 10*n decimal values, and the extra cost parsing format string
grows linearly with number of cpus. Replace seq_printf with
seq_put_decimal_ull_width have significant performance improvement.
On an 8CPUs system, reading /proc/softirqs show ~40% performance
gain with this patch.
Signed-off-by: David Wang <00107082@163.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While fp-stress is waiting for children to start it doesn't send any
signals to them so there is no need for it to have as short an epoll()
timeout as it does when the children are all running. We do still want to
have some timeout so that we can log diagnostics about missing children but
this can be relatively large. On emulated platforms the overhead of running
the supervisor process is quite high, especially during the process of
execing the test binaries.
Implement a longer epoll() timeout during the setup phase, using a 5s
timeout while waiting for children and switching to the signal raise
interval when all the children are started and we start sending signals.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241030-arm64-fp-stress-interval-v2-2-bd3cef48c22c@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we only deliver signals to the processes being tested about once
a second, meaning that the signal code paths are subject to relatively
little stress. Increase this frequency substantially to 25ms intervals,
along with some minor refactoring to make this more readily tuneable and
maintain the 1s logging interval. This interval was chosen based on some
experimentation with emulated platforms to avoid causing so much extra load
that the test starts to run into the 45s limit for selftests or generally
completely disconnect the timeout numbers from the
We could increase this if we moved the signal generation out of the main
supervisor thread, though we should also consider that he percentage of
time that we spend interacting with the floating point state is also a
consideration.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241030-arm64-fp-stress-interval-v2-1-bd3cef48c22c@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
iommufd_fault_iopf_enable has limitation to PRI on PCI/SRIOV VFs because
the PRI might be a shared resource and current iommu subsystem is not
ready to support enabling/disabling PRI on a VF without any impact on
others.
However, we have devices that appear as PCI but are actually on the AMBA
bus. These fake PCI devices have PASID capability, support stall as well
as SRIOV, so remove the limitation for these devices.
Link: https://patch.msgid.link/r/20241107043711.116-1-zhangfei.gao@linaro.org
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, show_stack() always dumps the trace of the current task.
However, it should dump the trace of the specified task if one is
provided. Otherwise, things like running "echo t > sysrq-trigger"
won't work as expected.
Fixes: 970e51fead ("um: Add support for CONFIG_STACKTRACE")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20241106103933.1132365-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the initialization of the disk pointer in the ubd structure
is missing. It should be initialized with the allocated gendisk pointer
in ubd_add().
Fixes: 32621ad7a7 ("ubd: remove the ubd_gendisk array")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://patch.msgid.link/20241104163203.435515-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the VHOST_USER_PROTOCOL_F_MQ protocol feature flag is set, we can
query the maximum number of virtual queues. Do so when supported and
extend the check to verify that we are not trying to allocate more
queues.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241103212854.1436046-5-benjamin@sipsolutions.net
[add a message to the WARN_ON]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the device does not support slave requests, then the IRQ will not yet
be allocated. So initialize the IRQ to UM_IRQ_ALLOC so that it will be
allocated if none has been assigned yet and store it slightly later when
we know that it will not be immediately unregistered again.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241103212854.1436046-4-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The rust based userspace vhost devices are very strict and will not
accept the message if it is longer than required. So, only include the
data for the first memory region.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241103212854.1436046-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The current panthor_device_mmap_io() implementation has two issues:
1. For mapping DRM_PANTHOR_USER_FLUSH_ID_MMIO_OFFSET,
panthor_device_mmap_io() bails if VM_WRITE is set, but does not clear
VM_MAYWRITE. That means userspace can use mprotect() to make the mapping
writable later on. This is a classic Linux driver gotcha.
I don't think this actually has any impact in practice:
When the GPU is powered, writes to the FLUSH_ID seem to be ignored; and
when the GPU is not powered, the dummy_latest_flush page provided by the
driver is deliberately designed to not do any flushes, so the only thing
writing to the dummy_latest_flush could achieve would be to make *more*
flushes happen.
2. panthor_device_mmap_io() does not block MAP_PRIVATE mappings (which are
mappings without the VM_SHARED flag).
MAP_PRIVATE in combination with VM_MAYWRITE indicates that the VMA has
copy-on-write semantics, which for VM_PFNMAP are semi-supported but
fairly cursed.
In particular, in such a mapping, the driver can only install PTEs
during mmap() by calling remap_pfn_range() (because remap_pfn_range()
wants to **store the physical address of the mapped physical memory into
the vm_pgoff of the VMA**); installing PTEs later on with a fault
handler (as panthor does) is not supported in private mappings, and so
if you try to fault in such a mapping, vmf_insert_pfn_prot() splats when
it hits a BUG() check.
Fix it by clearing the VM_MAYWRITE flag (userspace writing to the FLUSH_ID
doesn't make sense) and requiring VM_SHARED (copy-on-write semantics for
the FLUSH_ID don't make sense).
Reproducers for both scenarios are in the notes of my patch on the mailing
list; I tested that these bugs exist on a Rock 5B machine.
Note that I only compile-tested the patch, I haven't tested it; I don't
have a working kernel build setup for the test machine yet. Please test it
before applying it.
Cc: stable@vger.kernel.org
Fixes: 5fe909cae1 ("drm/panthor: Add the device logical block")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105-panthor-flush-page-fixes-v1-1-829aaf37db93@google.com
GuC uses GUC_ID_UNKNOWN if it can not map the CAT fault to any
context. We shouldn't treat that as G2H protocol error that would
justify a GT reset, as it may happen due to some VF activity.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105204557.1991-1-michal.wajdeczko@intel.com
While highly unlikely, incoming G2H message might be too short
so we shouldn't read any data from it prior to checking a length.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105173032.1947-4-michal.wajdeczko@intel.com
We are now logging details of the failed G2H message (including
its length) at the GuC CT component. Drop now redundant log from
the GuC submit code.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105173032.1947-3-michal.wajdeczko@intel.com
We are already logging an error once we failed to process a G2H
message, but then it's quite hard to extract the content of the
broken G2H message from the captured snapshot. Extend our error
log with the raw hexdump of the G2H message.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105173032.1947-2-michal.wajdeczko@intel.com
The show_stack function had some code to detect double faults. However,
the logic is wrong and it would e.g. trigger if a WARNING happened
inside an IRQ.
Remove it without trying to add a new logic. The current behaviour,
which will just fault repeatedly until the IRQ stack is used up and the
host kills UML, seems to be good enough.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241103150506.1367695-5-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is no need to sync the stub code to "disk" for the other process
to see the correct memory. Drop the fsync there and remove the helper
function.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241103150506.1367695-3-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since commit a95b37e20d ("kbuild: get <linux/compiler_types.h> out of
<linux/kconfig.h>") we can safely include these files in userspace code.
Doing so simplifies matters as options do not need to be exported via
asm-offsets.h anymore.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241103150506.1367695-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is no point in either dumping the KASAN shadow memory or doing
copy-on-write after a fork on these memory regions.
This considerably speeds up coredump generation.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241103150506.1367695-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
sparse reports that various places were missing the __user tag in casts.
In addition, one location was using 0 instead of NULL.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241031142017.430420-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Our static checker found a bug where set_serial_info() uses a mutex, but
get_serial_info() does not. Fortunately, the impact of this is relatively
minor. It doesn't cause a crash or any other serious issues. However, if a
race condition occurs between set_serial_info() and get_serial_info(),
there is a chance that the data returned by get_serial_info() will be
inconsistent.
Fixes: 3ae36bed3a ("fdti_sio: switch to ->[sg]et_serial()")
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0P8E
-----END PGP SIGNATURE-----
Merge tag 'nf-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fix for net
The following series contains a Netfilter fix:
1) Wait for rcu grace period after netdevice removal is reported via event.
* tag 'nf-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: wait for rcu grace period on net_device removal
====================
Link: https://patch.msgid.link/20241107113212.116634-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
K2G forwards the error triggered by a link-down state (e.g., no connected
endpoint device) on the system bus for PCI configuration transactions;
these errors are reported as an SError at system level, which is fatal and
hangs the system.
So, apply fix similar to how it was done in the DesignWare Core driver
commit 15b2390634 ("PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()").
Fixes: 10a797c6e5 ("PCI: dwc: keystone: Use pci_ops for config space accessors")
Link: https://lore.kernel.org/r/20240524105714.191642-3-s-vadapalli@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[kwilczynski: commit log, added tag for stable releases]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: stable@vger.kernel.org
Write the size of the optional payload of SOF_IPC4_MOD_INIT_INSTANCE
message to extension param_size-bits.
The previous IPC4 version does not set these bits that should indicate
the size of the optional payload (struct sof_ipc4_probe_cfg). The old
firmware side component code works well without these bits, but when
the probes are converted to use the generic module API, this does not
work anymore.
Fixes: f562359306 ("ASoC: SOF: IPC4: probes: Implement IPC4 ops for probes client device")
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20241107132840.17386-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 23284ad677 ("PCI: keystone: Add support for PCIe EP in AM654x
Platforms") introduced configuring "enum dw_pcie_device_mode" as part of
device data ("struct ks_pcie_of_data"). However it failed to set the
mode for "ti,keystone-pcie" compatible.
Since the mode defaults to "DW_PCIE_UNKNOWN_TYPE", the following error
message is displayed for the v3.65a controller:
"INVALID device type 0"
Despite the driver probing successfully, the controller may not be
functional in the Root Complex mode of operation.
So, set the mode as Root Complex for "ti,keystone-pcie" compatible to
fix this.
Fixes: 23284ad677 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms")
Link: https://lore.kernel.org/r/20240524105714.191642-2-s-vadapalli@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[kwilczynski: commit log, added tag for stable releases]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: stable@vger.kernel.org
Support setting the word delay using the -w/--word-delay command line
parameter. Note that spidev exposes word delay only as an u8, allowing
for a maximum of 255us of delay to be inserted.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://patch.msgid.link/20241107-spidev-test-word-delay-v1-1-d4bba5569e39@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>