Convert HMM DMA operations from the legacy page-based API to the new
physical address-based dma_map_phys() and dma_unmap_phys() functions.
This demonstrates the preferred approach for new code that should use
physical addresses directly rather than page+offset parameters.
The change replaces dma_map_page() and dma_unmap_page() calls with
dma_map_phys() and dma_unmap_phys() respectively, using the physical
address that was already available in the code. This eliminates the
redundant page-to-physical address conversion and aligns with the
DMA subsystem's move toward physical address-centric interfaces.
This serves as an example of how new code should be written to leverage
the more efficient physical address API, which provides cleaner interfaces
for drivers that already have access to physical addresses.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/d45207f195b8f77d23cc2d571c83197328a86b04.1757423202.git.leonro@nvidia.com
Introduce new DMA mapping functions dma_map_phys() and dma_unmap_phys()
that operate directly on physical addresses instead of page+offset
parameters. This provides a more efficient interface for drivers that
already have physical addresses available.
The new functions are implemented as the primary mapping layer, with
the existing dma_map_page_attrs()/dma_map_resource() and
dma_unmap_page_attrs()/dma_unmap_resource() functions converted to simple
wrappers around the phys-based implementations.
In case dma_map_page_attrs(), the struct page is converted to physical
address with help of page_to_phys() function and dma_map_resource()
provides physical address as is together with addition of DMA_ATTR_MMIO
attribute.
The old page-based API is preserved in mapping.c to ensure that existing
code won't be affected by changing EXPORT_SYMBOL to EXPORT_SYMBOL_GPL
variant for dma_*map_phys().
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/54cc52af91777906bbe4a386113437ba0bcfba9c.1757423202.git.leonro@nvidia.com
General dma_direct_map_resource() is going to be removed
in next patch, so simply open-code it in xen driver.
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/e9c66a92e818f416875441b6711963f9782dbbeb.1757423202.git.leonro@nvidia.com
Make dma_map_page_attrs() and dma_map_page_attrs() respect
DMA_ATTR_MMIO.
DMA_ATR_MMIO makes the functions behave the same as
dma_(un)map_resource():
- No swiotlb is possible
- Legacy dma_ops arches use ops->map_resource()
- No kmsan
- No arch_dma_map_phys_direct()
The prior patches have made the internal functions called here
support DMA_ATTR_MMIO.
This is also preparation for turning dma_map_resource() into an inline
calling dma_map_phys(DMA_ATTR_MMIO) to consolidate the flows.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/3660e2c78ea409d6c483a215858fb3af52cd0ed3.1757423202.git.leonro@nvidia.com
Convert the KMSAN DMA handling function from page-based to physical
address-based interface.
The refactoring renames kmsan_handle_dma() parameters from accepting
(struct page *page, size_t offset, size_t size) to (phys_addr_t phys,
size_t size). The existing semantics where callers are expected to
provide only kmap memory is continued here.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/3557cbaf66e935bc794f37d2b891ef75cbf2c80c.1757423202.git.leonro@nvidia.com
Convert the DMA direct mapping functions to accept physical addresses
directly instead of page+offset parameters. The functions were already
operating on physical addresses internally, so this change eliminates
the redundant page-to-physical conversion at the API boundary.
The functions dma_direct_map_page() and dma_direct_unmap_page() are
renamed to dma_direct_map_phys() and dma_direct_unmap_phys() respectively,
with their calling convention changed from (struct page *page,
unsigned long offset) to (phys_addr_t phys).
Architecture-specific functions arch_dma_map_page_direct() and
arch_dma_unmap_page_direct() are similarly renamed to
arch_dma_map_phys_direct() and arch_dma_unmap_phys_direct().
The is_pci_p2pdma_page() checks are replaced with DMA_ATTR_MMIO checks
to allow integration with dma_direct_map_resource and dma_direct_map_phys()
is extended to support MMIO path either.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/bb15a22f76dc2e26683333ff54e789606cfbfcf0.1757423202.git.leonro@nvidia.com
Make iommu_dma_map_phys() and iommu_dma_unmap_phys() respect
DMA_ATTR_MMIO.
DMA_ATTR_MMIO makes the functions behave the same as
iommu_dma_(un)map_resource():
- No swiotlb is possible
- No cache flushing is done (ATTR_MMIO should not be cached memory)
- prot for iommu_map() has IOMMU_MMIO not IOMMU_CACHE
This is preparation for replacing iommu_dma_map_resource() callers
with iommu_dma_map_phys(DMA_ATTR_MMIO) and removing
iommu_dma_(un)map_resource().
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/acc255bee358fec9c7da6b2a5904ee50abcd09f1.1757423202.git.leonro@nvidia.com
Rename the IOMMU DMA mapping functions to better reflect their actual
calling convention. The functions iommu_dma_map_page() and
iommu_dma_unmap_page() are renamed to iommu_dma_map_phys() and
iommu_dma_unmap_phys() respectively, as they already operate on physical
addresses rather than page structures.
The calling convention changes from accepting (struct page *page,
unsigned long offset) to (phys_addr_t phys), which eliminates the need
for page-to-physical address conversion within the functions. This
renaming prepares for the broader DMA API conversion from page-based
to physical address-based mapping throughout the kernel.
All callers are updated to pass physical addresses directly, including
dma_map_page_attrs(), scatterlist mapping functions, and DMA page
allocation helpers. The change simplifies the code by removing the
page_to_phys() + offset calculation that was previously done inside
the IOMMU functions.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/ed172f95f8f57782beae04f782813366894e98df.1757423202.git.leonro@nvidia.com
Convert the DMA debug infrastructure from page-based to physical address-based
mapping as a preparation to rely on physical address for DMA mapping routines.
The refactoring renames debug_dma_map_page() to debug_dma_map_phys() and
changes its signature to accept a phys_addr_t parameter instead of struct page
and offset. Similarly, debug_dma_unmap_page() becomes debug_dma_unmap_phys().
A new dma_debug_phy type is introduced to distinguish physical address mappings
from other debug entry types. All callers throughout the codebase are updated
to pass physical addresses directly, eliminating the need for page-to-physical
conversion in the debug layer.
This refactoring eliminates the need to convert between page pointers and
physical addresses in the debug layer, making the code more efficient and
consistent with the DMA mapping API's physical address focus.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
[mszyprow: added a fixup]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/56d1a6769b68dfcbf8b26a75a7329aeb8e3c3b6a.1757423202.git.leonro@nvidia.com
Link: https://lore.kernel.org/all/20250910052618.GH341237@unreal/
This will replace the hacky use of DMA_ATTR_SKIP_CPU_SYNC to avoid
touching the possibly non-KVA MMIO memory.
Also correct the incorrect caching attribute for the IOMMU, MMIO
memory should not be cachable inside the IOMMU mapping or it can
possibly create system problems. Set IOMMU_MMIO for DMA_ATTR_MMIO.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/17ba63991aeaf8a80d5aca9ba5d028f1daa58f62.1757423202.git.leonro@nvidia.com
This patch introduces the DMA_ATTR_MMIO attribute to mark DMA buffers
that reside in memory-mapped I/O (MMIO) regions, such as device BARs
exposed through the host bridge, which are accessible for peer-to-peer
(P2P) DMA.
This attribute is especially useful for exporting device memory to other
devices for DMA without CPU involvement, and avoids unnecessary or
potentially detrimental CPU cache maintenance calls.
DMA_ATTR_MMIO is supposed to provide dma_map_resource() functionality
without need to call to special function and perform branching when
processing generic containers like bio_vec by the callers.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/6f058ec395c5348014860dbc2eed348c17975843.1757423202.git.leonro@nvidia.com
- one more fix for DMA API debugging infrastructure (Baochen Qiang)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaMAGzwAKCRCJp1EFxbsS
RJcvAPwO4NrxrUQdjaXOy//DhFNG4fhMmdn6kYqD+TjTJq9QnwEA/dMGxU1fZqvM
Kqusn1iiQsHjFLRzEOExqRbL6MFDSgM=
=ViHe
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.17-2025-09-09' into HEAD
dma-mapping fix for Linux 6.17
- one more fix for DMA API debugging infrastructure (Baochen Qiang)
CONFIG_USB_EHCI_MSM was removed long time ago in v4.14-rc6
8b3f863033 ("usb: host: remove ehci-msm.c").
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250829165031.110850-1-petr.vorel@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
All the other ref clocks provided by this driver have the bi_tcxo
as parent. The eDP refclk is the only one without a parent, leading
to reporting its rate as 0. So set its parent to bi_tcxo, just like
the rest of the refclks.
Cc: stable@vger.kernel.org # v6.9
Fixes: 06aff11619 ("clk: qcom: Add TCSR clock driver for x1e80100")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250730-clk-qcom-tcsrcc-x1e80100-parent-edp-refclk-v1-1-7a36ef06e045@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When SHM bridge is enabled, assigning RMTFS memory causes the calling
core to hang if the system is running in EL1.
Disable SHM bridge on sc7180 devices to avoid that hang.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-sc7180-shm-hang-v1-1-99ad9ffeb5b4@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
After initializing a field in an initializer macro, create a variable
holding a reference that points at that field. The type is either
`Pin<&mut T>` or `&mut T` depending on the field's structural pinning
kind.
[ Applied fixes to devres and rust_driver_pci sample - Benno]
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Benno Lossin <lossin@kernel.org>
Make the `#[pin_data]` macro generate a `*Projection` struct that holds
either `Pin<&mut Field>` or `&mut Field` for every field of the original
struct. Which version is chosen depends on weather there is a `#[pin]`
or not respectively. Access to this projected version is enabled through
generating `fn project(self: Pin<&mut Self>) -> SelfProjection<'_>`.
[ Adapt workqueue to use the new projection instead of its own, custom
one - Benno ]
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Benno Lossin <lossin@kernel.org>
The next commit makes the `#[pin_data]` attribute generate a `project`
function that would collide with any existing ones.
Signed-off-by: Benno Lossin <lossin@kernel.org>
When running this example with no cargo features enabled, the compiler
warns on 1.89:
error: struct `Error` is never constructed
--> examples/error.rs:11:12
|
11 | pub struct Error;
| ^^^^^
|
= note: `-D dead-code` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(dead_code)]`
Thus use the error in the main function to avoid this warning.
Signed-off-by: Benno Lossin <lossin@kernel.org>
When CONFIG_SECURITY is not set, CONFIG_LSM (builtin_lsm_order) does
not need to be visible and settable since builtin_lsm_order is defined in
security.o, which is only built when CONFIG_SECURITY=y.
So make CONFIG_LSM depend on CONFIG_SECURITY.
Fixes: 13e735c0e9 ("LSM: Introduce CONFIG_LSM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[PM: subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Update the DMA Rust maintainers entry in the following two aspects:
(1) Change Abdiel's entry to 'Reviewer'.
(2) Take patches through the driver-core tree.
Abdiel won't do any more maintainer work on the DMA (or scatterlist)
infrastructure, but he'd like to be kept in the loop, hence change is
entry to 'R:'.
Analogous to [1], the DMA (and scatterlist) helpers are closely coupled
with the core device infrastructure and the device lifecycle, hence take
patches through the driver-core tree by default.
Cc: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Link: https://lore.kernel.org/r/20250725202840.2251768-1-ojeda@kernel.org [1]
Acked-by: Abdiel Janulgue <abdiel.janulgue@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Puranjay Mohan says:
====================
bpf: report arena faults to BPF streams
Changes in v6->v7:
v6: https://lore.kernel.org/all/20250908163638.23150-1-puranjay@kernel.org/
- Added comments about the usage of arena_reg in x86 and arm64 jits. (Alexei)
- Used clear_lo32() for clearing the lower 32-bits of user_vm_start. (Alexei)
- Moved update of the old tests to use __stderr to a separate commit (Eduard)
- Used test__skip() in prog_tests/stream.c (Eduard)
- Start a sub-test for read / write
Changes in v5->v6:
v5: https://lore.kernel.org/all/20250901193730.43543-1-puranjay@kernel.org/
- Introduces __stderr and __stdout for easy testing of bpf streams
(Eduard)
- Add more test cases for arena fault reporting (subprog and callback)
- Fix main_prog_aux usage and return main_prog from find_from_stack_cb
(Kumar)
- Properly fix the build issue reported by kernel test robot
Changes in v4->v5:
v4: https://lore.kernel.org/all/20250827153728.28115-1-puranjay@kernel.org/
- Added patch 2 to introducing main_prog_aux for easier access to
streams.
- Fixed bug in fault handlers when arena_reg == dst_reg
- Updated selftest to check test above edge case.
- Added comments about the usage of barrier_var() in code and commit
message.
Changes in v3->v4:
v3: https://lore.kernel.org/all/20250827150113.15763-1-puranjay@kernel.org/
- Fixed a build issue when CONFIG_BPF_JIT=y and # CONFIG_BPF_SYSCALL is
not set
Changes in v2->v3:
v2: https://lore.kernel.org/all/20250811111828.13836-1-puranjay@kernel.org/
- Improved the selftest to check the exact fault address
- Dropped BPF_NO_KFUNC_PROTOTYPES and bpf_arena_alloc/free_pages() usage
- Rebased on bpf-next/master
Changes in v1->v2:
v1: https://lore.kernel.org/all/20250806085847.18633-1-puranjay@kernel.org/
- Changed variable and mask names for consistency (Yonghong)
- Added Acked-by: Yonghong Song <yonghong.song@linux.dev> on two patches
This set adds the support of reporting page faults inside arena to BPF
stderr stream. The reported address is the one that a user would expect
to see if they pass it to bpf_printk();
Here is an example output from the stderr stream and bpf_printk()
ERROR: Arena WRITE access at unmapped address 0xdeaddead0000
CPU: 9 UID: 0 PID: 502 Comm: test_progs
Call trace:
bpf_stream_stage_dump_stack+0xc0/0x150
bpf_prog_report_arena_violation+0x98/0xf0
ex_handler_bpf+0x5c/0x78
fixup_exception+0xf8/0x160
__do_kernel_fault+0x40/0x188
do_bad_area+0x70/0x88
do_translation_fault+0x54/0x98
do_mem_abort+0x4c/0xa8
el1_abort+0x44/0x70
el1h_64_sync_handler+0x50/0x108
el1h_64_sync+0x6c/0x70
bpf_prog_a64a9778d31b8e88_stream_arena_write_fault+0x84/0xc8
*(page) = 1; @ stream.c:100
bpf_prog_test_run_syscall+0x100/0x328
__sys_bpf+0x508/0xb98
__arm64_sys_bpf+0x2c/0x48
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x48/0xf8
do_el0_svc+0x28/0x40
el0_svc+0x48/0xf8
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x198/0x1a0
Same address is printed by bpf_printk():
1389.078831: bpf_trace_printk: Read Address: 0xdeaddead0000
To make this possible, some extra metadata has to be passed to the bpf
exception handler, so the bpf exception handling mechanism for both
x86-64 and arm64 have been improved in this set.
The streams selftest has been updated to test this new feature.
====================
Link: https://patch.msgid.link/20250911145808.58042-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests for testing the reporting of arena page faults through BPF
streams. Two new bpf programs are added that read and write to an
unmapped arena address and the fault reporting is verified in the
userspace through streams.
The added bpf programs need to access the user_vm_start in struct
bpf_arena, this is done by casting &arena to struct bpf_arena *, but
barrier_var() is used on this ptr before accessing ptr->user_vm_start;
to stop GCC from issuing an out-of-bound access due to the cast from
smaller map struct to larger "struct bpf_arena"
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250911145808.58042-7-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Start using __stderr directly in the bpf programs to test the reporting
of may_goto timeout detection and spin_lock dead lock detection.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250911145808.58042-6-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add __stderr and __stdout to validate the output of BPF streams for bpf
selftests. Similar to __xlated, __jited, etc., __stderr/out can be used
in the BPF progs to compare a string (regex supported) to the output in
the bpf streams.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250911145808.58042-5-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Begin reporting arena page faults and the faulting address to BPF
program's stderr, this patch adds support in the arm64 and x86-64 JITs,
support for other archs can be added later.
The fault handlers receive the 32 bit address in the arena region so
the upper 32 bits of user_vm_start is added to it before printing the
address. This is what the user would expect to see as this is what is
printed by bpf_printk() is you pass it an address returned by
bpf_arena_alloc_pages();
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250911145808.58042-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF streams are only valid for the main programs, to make it easier to
access streams from subprogs, introduce main_prog_aux in struct
bpf_prog_aux.
prog->aux->main_prog_aux = prog->aux, for main programs and
prog->aux->main_prog_aux = main_prog->aux, for subprograms.
Make bpf_prog_find_from_stack() use the added main_prog_aux to return
the mainprog when a subprog is found on the stack.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250911145808.58042-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF loads with BPF_PROBE_MEM(SX) can load from unsafe pointers and the
JIT adds an exception table entry for the JITed instruction which allows
the exeption handler to set the destination register of the load to zero
and continue execution from the next instruction.
As all arm64 instructions are AARCH64_INSN_SIZE size, the exception
handler can just increment the pc by AARCH64_INSN_SIZE without needing
the exact address of the instruction following the the faulting
instruction.
Simplify the exception table usage in arm64 JIT by only saving the
destination register in ex->fixup and drop everything related to
the fixup_offset. The fault handler is modified to add AARCH64_INSN_SIZE
to the pc.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20250911145808.58042-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
arm32 KVM was removed in commit 541ad0150c ("arm: Remove 32bit KVM
host support").
None of the kvm selftests are compiled for arm32 and it's not indirectly
included from anywhere either, so delete it.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250910-james-tools-header-cleanup-v1-2-7ae4bedc99e0@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These have been unused since commit 162607ea20 ("perf kvm/{x86,s390}:
Remove dependency on uapi/kvm_perf.h") in favour of dynamic discovery.
Remove the unused headers to reduce consistency checking overhead and
noise.
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250910-james-tools-header-cleanup-v1-1-7ae4bedc99e0@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, xattr name prefixes are forcibly placed into the packed
inode if the fragments feature is enabled, and users have no option
to put them in plain form directly on disk.
This is inflexible. First, as mentioned above, users should be able
to store unwrapped long xattr name prefixes unconditionally
(COMPAT_PLAIN_XATTR_PFX). Second, since we now have the new metabox
inode to store metadata, it should be used when available instead
of the packed inode.
Fixes: 414091322c ("erofs: implement metadata compression")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The device support firmware logging feature. Use libie code to
initialize it and allow reading the logs using debugfs.
The commands are the same as in ice driver. Look at the description in
commit 96a9a9341c ("ice: configure FW logging") for more info.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move whole code from ice_fwlog.c/h to libie/fwlog.c/h.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Wrap libie_fwlog_register() by libie_fwlog_reregister(), which checks
first if the registration is needed. This simplifies the code and makes
the former function static.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
s/ice/libie
There is no function for filling default descriptor in libie. Zero
descriptor structure and set opcode without calling the function.
Make functions that are caled only in ice_fwlog.c static.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This code is only used in fwlog. Moved it there for easier lib creation.
There is a circular dependency between debugfs and fwlog. Moving to one
file is fixing it.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Copy the code and:
- change ICE_AQC to LIBIE_AQC
- change ice_aqc to libie_aqc
- move definitions outside the structures
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In debugfs pass ice_fwlog structure instead of ice_pf.
The debgufs dirs specific for fwlog can be stored in fwlog structure.
Add debugfs entry point to fwlog api.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fwlog can be supported only on PF 0. Check this before calling
init/deinit functions.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The root debugfs directory should be available from driver side, not
from library. Move it out from fwlog code.
Make similar to __fwlog_init() __fwlog_deinit() and deinit debugfs
there. In case of ice only fwlog is using debugfs.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fwlog code needs to communicate with FW. In ice it is done through admin
queue command. Allow indirect calling the send function to move the
specific admin queue send function from fwlog core code.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Prepare the code to be moved to the library. ice_debug() won't be there
so switch to dev_dbg().
Add struct pdev pointer in fwlog to track on which pdev the fwlog was
created.
Switch the dev passed in dev_warn() to the one stored in fwlog.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The new structure is needed to make the fwlog code a library. A goal is
to drop ice_hw structure in all fwlog related functions calls.
Pass a ice_fwlog pointer across fwlog functions and use it wherever it
is possible.
Still use &hw->fwlog in debugfs code as it needs changing the value
being passed in priv. It will be done in one of the next patches.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Any other access to fwlog_cfg isn't done through a function. Follow
scheme that is used to access other fwlog_cfg elements from debugfs and
write to the log_level directly.
ice_pf_fwlog_update_module() is called only twice (from one function).
Remove it.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Change the function prototype to receive hw structure instead of pf to
simplify the call. Instead of passing whole event pass only msg_buf
pointer and length.
Make ice_fwlog_ring_full() static as it isn't called from any other
context.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_fwlog_supported(), ice_fwlog_get() and ice_fwlog_supported() aren't
called outside the ice_fwlog.c file. Make it static and move in the file
to allow clean build.
Drop ice_fwlog_get(). It is called only from ice_fwlog_init() function
where the fwlog support is already checked. There is no need to check it
again, call ice_aq_fwlog_get() instead.
Drop no longer valid comment from ice_fwlog_get_supported().
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
All of the x86 KVM guest types (VMX, SEV and TDX) do some special context
tracking when entering guests. This means that the actual guest entry
sequence must be noinstr.
Part of entering a TDX guest is passing a physical address to the TDX
module. Right now, that physical address is stored as a 'struct page'
and converted to a physical address at guest entry. That page=>phys
conversion can be complicated, can vary greatly based on kernel
config, and it is definitely _not_ a noinstr path today.
There have been a number of tinkering approaches to try and fix this
up, but they all fall down due to some part of the page=>phys
conversion infrastructure not being noinstr friendly.
Precalculate the page=>phys conversion and store it in the existing
'tdx_vp' structure. Use the new field at every site that needs a
tdvpr physical address. Remove the now redundant tdx_tdvpr_pa().
Remove the __flatten remnant from the tinkering.
Note that only one user of the new field is actually noinstr. All
others can use page_to_phys(). But, they might as well save the effort
since there is a pre-calculated value sitting there for them.
[ dhansen: rewrite all the text ]
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kiryl Shutsemau <kas@kernel.org>
Tested-by: Farrah Chen <farrah.chen@intel.com>
