Work in progress, but get rid of the per-ring serialization of resource
nodes, like registered buffers and files. Main issue here is that one
node can otherwise hold up a bunch of other nodes from getting freed,
which is especially a problem for file resource nodes and networked
workloads where some descriptors may not see activity in a long time.
As an example, instantiate an io_uring ring fd and create a sparse
registered file table. Even 2 will do. Then create a socket and register
it as fixed file 0, F0. The number of open files in the app is now 5,
with 0/1/2 being the usual stdin/out/err, 3 being the ring fd, and 4
being the socket. Register this socket (eg "the listener") in slot 0 of
the registered file table. Now add an operation on the socket that uses
slot 0. Finally, loop N times, where each loop creates a new socket,
registers said socket as a file, then unregisters the socket, and
finally closes the socket. This is roughly similar to what a basic
accept loop would look like.
At the end of this loop, it's not unreasonable to expect that there
would still be 5 open files. Each socket created and registered in the
loop is also unregistered and closed. But since the listener socket
registered first still has references to its resource node due to still
being active, each subsequent socket unregistration is stuck behind it
for reclaim. Hence 5 + N files are still open at that point, where N is
awaiting the final put held up by the listener socket.
Rewrite the io_rsrc_node handling to NOT rely on serialization. Struct
io_kiocb now gets explicit resource nodes assigned, with each holding a
reference to the parent node. A parent node is either of type FILE or
BUFFER, which are the two types of nodes that exist. A request can have
two nodes assigned, if it's using both registered files and buffers.
Since request issue and task_work completion is both under the ring
private lock, no atomics are needed to handle these references. It's a
simple unlocked inc/dec. As before, the registered buffer or file table
each hold a reference as well to the registered nodes. Final put of the
node will remove the node and free the underlying resource, eg unmap the
buffer or put the file.
Outside of removing the stall in resource reclaim described above, it
has the following advantages:
1) It's a lot simpler than the previous scheme, and easier to follow.
No need to specific quiesce handling anymore.
2) There are no resource node allocations in the fast path, all of that
happens at resource registration time.
3) The structs related to resource handling can all get simplified
quite a bit, like io_rsrc_node and io_rsrc_data. io_rsrc_put can
go away completely.
4) Handling of resource tags is much simpler, and doesn't require
persistent storage as it can simply get assigned up front at
registration time. Just copy them in one-by-one at registration time
and assign to the resource node.
The only real downside is that a request is now explicitly limited to
pinning 2 resources, one file and one buffer, where before just
assigning a resource node to a request would pin all of them. The upside
is that it's easier to follow now, as an individual resource is
explicitly referenced and assigned to the request.
With this in place, the above mentioned example will be using exactly 5
files at the end of the loop, not N.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
0-day reported:
arch/x86/entry/vdso/vma.c:199:3: warning: label followed by a declaration
is a C23 extension [-Wc23-extensions]
Add the missing brackets.
Fixes: e93d2521b2 ("x86/vdso: Split virtual clock pages into dedicated mapping")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Closes: https://lore.kernel.org/oe-kbuild-all/202411022359.fBPFTg2T-lkp@intel.com/
The output of ".%03u" with the unsigned int in range [0, 4294966295] may
get truncated if the target buffer is not 12 bytes. This can't really
happen here as the 'remainder' variable cannot exceed 999 but the
compiler doesn't know it. To make it happy just increase the buffer to
where the warning goes away.
Fixes: 3c9f3681d0 ("[SCSI] lib: add generic helper to print sizes rounded to the correct SI range")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Kees Cook <kees@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20241101205453.9353-1-brgl@bgdev.pl
Signed-off-by: Kees Cook <kees@kernel.org>
* fix a sysbot reported crash on filestreams
* Reduce cpu time spent searching for extents in
a very fragmented FS
* Check for delayed allocations before setting extsize
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQQMHYkcUKcy4GgPe2RGdaER5QtfpgUCZyIMDwAKCRBGdaER5Qtf
pllxAYCkk+mtDTD5xBfOVGZWO5MMFz8HqYcro5wrSCzgL8HDmW29kXTBYFviGn3R
3l/H6BEBgOk0EkI5qGOzijpzbsWyJeLzPzZtxQFPD8zFBdxSERCtbpqFDLLvLQWG
M+TLhUNkPQ==
=kKX4
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.12-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
- fix a sysbot reported crash on filestreams
- Reduce cpu time spent searching for extents in a very fragmented FS
- Check for delayed allocations before setting extsize
* tag 'xfs-6.12-fixes-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: streamline xfs_filestream_pick_ag
xfs: fix finding a last resort AG in xfs_filestream_pick_ag
xfs: Reduce unnecessary searches when searching for the best extents
xfs: Check for delayed allocations before setting extsize
Currently, if 'Global IRQ' is supported by the platform, only the Link up
interrupt is enabled in the PARF_INT_ALL_MASK register. This masks MSIs
on some platforms. The MSI bits in PARF_INT_ALL_MASK register are enabled
by default in the hardware, but commit 4581403f67 ("PCI: qcom: Enumerate
endpoints based on Link up event in 'global_irq' interrupt") disabled them
and enabled only the Link up interrupt. While MSI continued to work on the
SM8450 platform that was used to test the offending commit, on other
platforms like SM8250, X1E80100, MSIs are getting masked. And they require
enabling the MSI interrupt bits in the register to unmask (enable) the
MSIs.
Even though the MSI interrupt enable bits in PARF_INT_ALL_MASK are
described as 'diagnostic' interrupts in the internal documentation,
disabling them masks MSI on these platforms. Due to this, MSIs were not
reported to be received these platforms while supporting 'Global IRQ'.
So, enable the MSI interrupts along with the Link up interrupt in the
PARF_INT_ALL_MASK register if 'Global IRQ' is supported. This ensures that
the MSIs continue to work and also the driver is able to catch the Link
up interrupt for enumerating endpoint devices.
Fixes: 4581403f67 ("PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt")
Closes: https://lore.kernel.org/linux-pci/9a692c98-eb0a-4d86-b642-ea655981ff53@kernel.org/
Link: https://lore.kernel.org/r/20241007051255.4378-1-manivannan.sadhasivam@linaro.org
Reported-by: Konrad Dybcio <konradybcio@kernel.org>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # SL7
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Qiang Yu <quic_qianyu@quicinc.com>
In the fwnode_iio_channel_get_by_name(), iterating over parent nodes to
acquire IIO channels via fwnode_for_each_parent_node(). The variable
chan was mistakenly attempted on the original node instead of the
current parent node. This patch corrects the logic to ensure that
__fwnode_iio_channel_get_by_name() is called with the correct parent
node.
Cc: stable@vger.kernel.org # v6.6+
Fixes: 1e64b9c5f9 ("iio: inkern: move to fwnode properties")
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Link: https://patch.msgid.link/20241102092525.2389952-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On the Qualcomm SAR2130P platform the PCIe host is compatible with the
DWC controller present on the SM8550 platorm, just using one additional
clock.
Link: https://lore.kernel.org/r/20241017-sar2130p-pci-v1-1-5b95e63d9624@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The struct arch_vdso_data is only about vdso time data. So rename it to
arch_vdso_time_data to make it obvious.
Non time-related data will be migrated out of these structs soon.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-28-b64f0842d512@linutronix.de
The systemcfg data only has minimal overlap with the vdso data.
Splitting the two avoids mapping the implementation-defined vdso data
into /proc/ppc64/systemcfg.
It is also a preparation for the standardization of vdso data storage.
The only field actually used by both systemcfg and vdso is
tb_ticks_per_sec and it is only changed once during time_init().
Initialize it in both structures there.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-26-b64f0842d512@linutronix.de
The systemcfg page through procfs is only a backwards-compatible
interface for very old applications.
Make it possible to be disabled.
This also creates a convenient config #define to guard any accesses to
the systemcfg page.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-25-b64f0842d512@linutronix.de
The systemcfg processorCount variable tracks currently online variables,
not possible ones, so the stored value is wrong.
The code preferably tries to use the ibm,lrdr-capacity field 4 which
"represents the maximum number of processors that the guest can have."
Switch from processorCount to the better matching num_possible_cpus().
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-24-b64f0842d512@linutronix.de
When printing the information "system_active_processors", the variable
partition_potential_processors is used instead of
partition_active_processors. The wrong value is displayed.
Use partition_active_processors instead.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-23-b64f0842d512@linutronix.de
The generic vdso data storage cannot handle the special pvclock and
hvclock pages. Split them into their own mapping, so the other vdso
storage can be migrated to the generic code.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-20-b64f0842d512@linutronix.de
The vdso_data is at the start of the vvar page.
Make use of this invariant to remove the usage of vvar.h.
This also matches the logic for the timens data.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-18-b64f0842d512@linutronix.de
The vdso_data is at the start of the timens page.
Make use of this invariant to remove the usage of vvar.h.
This also matches the logic for the pvclock and hvclock pages.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-15-b64f0842d512@linutronix.de
Remove the usage of the vvar _vdso_rng_data from the kernel-space code,
as the x86 vvar machinery is about to be removed.
The definition of the structure is unnecessary, as the data lives in a
page pre-allocated by the linker anyways.
The vdso user-space access to the rng data will be switched soon.
DEFINE_VVAR_SINGLE() is now unused. It will be removed later togehter
with the rest of vvar.h.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-13-b64f0842d512@linutronix.de
The offset of the vdso_data only has historic reasons, as back then
other vvars also existed and offset 0 was already used.
(See commit 8c49d9a74b ("x86-64: Clean up vdso/kernel shared variables"))
Over time most other vvars got removed and offset 0 is free again.
Moving vdso_data to the beginning of the vvar page aligns x86 with other
architectures and opens up the way for the removal of the custom x86
vvar machinery.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-12-b64f0842d512@linutronix.de
The generic vdso/datapage.h declares a symbol named "vdso_data".
Avoid a conflict by renaming the identically named variable in genvdso.c.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-9-b64f0842d512@linutronix.de
vdso/datapage.h provides symbols and functions to ease the access to
shared vDSO data from both the kernel and the vDSO.
Make use of it to simplify the current code and also prepare for further
changes unifying the vDSO data storage between architectures.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-8-b64f0842d512@linutronix.de
vdso/datapage.h provides a hidden declaration for _vdso_data.
When using it the compiler will automatically generate PC-relative
accesses which avoids the need for a custom assembly-based accessor.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-7-b64f0842d512@linutronix.de
The vvar mapping is the same for all processes. Use a single mapping to
simplify the logic and align it with the other architectures.
In addition this will enable the move of the vvar handling into generic code.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-6-b64f0842d512@linutronix.de
The vvar mapping is the same for all processes. Use a single mapping to
simplify the logic and align it with the other architectures.
In addition this will enable the move of the vvar handling into generic code.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-5-b64f0842d512@linutronix.de
This constant is always "0", providing no value and making the logic
harder to understand.
Also prepare for a consolidation of the vdso linkerscript logic by
aligning it with other architectures.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-4-b64f0842d512@linutronix.de
This constant is always "0", providing no value and making the logic
harder to understand.
Also prepare for a consolidation of the vdso linkerscript logic by
aligning it with other architectures.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-3-b64f0842d512@linutronix.de
All callers of arch_vma_name() also get the name via vm_ops, which for
these VMAs will use the name from 'struct vma_special_mapping'.
Therefore the custom implementation is unnecessary and can be removed in
favor of the default implementation from kernel/signal.c.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-2-b64f0842d512@linutronix.de
The time-related VDSO functionality was introduced in 2021 in
commit 87f3248cdb ("csky: Reconstruct VDSO framework") and
commit 0d3b051adb ("csky: Add VDSO with GENERIC_GETTIMEOFDAY, GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO").
However the corresponding aux-vector entry AT_SYSINFO_EHDR was never
wired up, making these functions impossible to test or use.
The VDSO itself is kept as it also provides rt_sigreturn which is
exposed differently to userspace.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-1-b64f0842d512@linutronix.de
The A100 has 3 MMC controllers, one of them being especially targeted to
eMMC. Let's add nodes on dts.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Link: https://patch.msgid.link/20241031070232.1793078-10-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Allwinner A100 has two HCI USB controllers, a OTG controller and a
USB PHY. The PHY is compatible with that used by the D1, while the OTG
controller is compatible with the A33. Add nodes for these to the base
DTSI.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
[masterr3c0rd@epochal.quest: fallback to a33-musb and d1-usb-phy, edited message]
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Parthiban Nallathambi <parthiban@linumiz.com>
Link: https://patch.msgid.link/20241031070232.1793078-7-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The A100 MUSB peripheral has 10 endpoints, and thus is compatible with
the A33 version.
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241031070232.1793078-6-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Allwinner A100 contains two fully OHCI/EHCI compatible USB host
controllers. Add their compatible strings to the list of
generic OHCI/EHCI controllers.
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241031070232.1793078-5-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The USB PHY found in the A100 is similar to that found in the D1. Add a
compatible for the A100.
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241031070232.1793078-4-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add the Performance Monitoring Unit (PMU) device tree node to the A100
.dtsi, which tells DT users which interrupts are triggered by PMU overflow
events on each core.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Link: https://patch.msgid.link/20241031070232.1793078-2-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
To work around a limitation in our clock modelling, we try to force two
bits in the AUDIO0 PLL to 0, in the CCU probe routine.
However the ~ operator only applies to the first expression, and does
not cover the second bit, so we end up clearing only bit 1.
Group the bit-ORing with parentheses, to make it both clearer to read
and actually correct.
Fixes: 35b97bb941 ("clk: sunxi-ng: Add support for the D1 SoC clocks")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241001105016.1068558-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
If an error indicating that the device needs to be reset is reported,
disable the error reporting before device reset is complete,
enable the error reporting after the reset is complete to prevent
the same error from being reported repeatedly.
Fixes: eaebf4c3b1 ("crypto: hisilicon - Unify hardware error init/uninit into QM")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>