Ido Schimmel says:
====================
ipv4: icmp: Fix source IP derivation in presence of VRFs
Align IPv4 with IPv6 and in the presence of VRFs generate ICMP error
messages with a source IP that is derived from the receiving interface
and not from its VRF master. This is especially important when the error
messages are "Time Exceeded" messages as it means that utilities like
traceroute will show an incorrect packet path.
Patches #1-#2 are preparations.
Patch #3 is the actual change.
Patches #4-#7 make small improvements in the existing traceroute test.
Patch #8 extends the traceroute test with VRF test cases for both IPv4
and IPv6.
Changes since v1 [1]:
* Rebase.
[1] https://lore.kernel.org/netdev/20250901083027.183468-1-idosch@nvidia.com/
====================
Link: https://patch.msgid.link/20250908073238.119240-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Create versions of the existing test cases where the routers generating
the ICMP error messages are using VRFs. Check that the source IPs of
these messages do not change in the presence of VRFs.
IPv6 always behaved correctly, but IPv4 fails when reverting "ipv4:
icmp: Fix source IP derivation in presence of VRFs".
Without IPv4 change:
# ./traceroute.sh
TEST: IPv6 traceroute [ OK ]
TEST: IPv6 traceroute with VRF [ OK ]
TEST: IPv4 traceroute [ OK ]
TEST: IPv4 traceroute with VRF [FAIL]
traceroute did not return 1.0.3.1
$ echo $?
1
The test fails because the ICMP error message is sent with the VRF
device's IP (1.0.4.1):
# traceroute -n -s 1.0.1.3 1.0.2.4
traceroute to 1.0.2.4 (1.0.2.4), 30 hops max, 60 byte packets
1 1.0.4.1 0.165 ms 0.110 ms 0.103 ms
2 1.0.2.4 0.098 ms 0.085 ms 0.078 ms
# traceroute -n -s 1.0.3.3 1.0.2.4
traceroute to 1.0.2.4 (1.0.2.4), 30 hops max, 60 byte packets
1 1.0.4.1 0.201 ms 0.138 ms 0.129 ms
2 1.0.2.4 0.123 ms 0.105 ms 0.098 ms
With IPv4 change:
# ./traceroute.sh
TEST: IPv6 traceroute [ OK ]
TEST: IPv6 traceroute with VRF [ OK ]
TEST: IPv4 traceroute [ OK ]
TEST: IPv4 traceroute with VRF [ OK ]
$ echo $?
0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-9-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When generating ICMP error messages, the kernel will prefer a source IP
that is on the same subnet as the destination IP (see
inet_select_addr()). Test this behavior by invoking traceroute with
different source IPs and checking that the ICMP error message is
generated with a source IP in the same subnet.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-8-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Both of the addresses are configured as primary addresses, but the
kernel is expected to choose 10.0.1.1/24 as the source IP of the ICMP
error message since it is on the same subnet as the destination IP of
the message (10.0.1.3/24). Reword the comment to reflect that.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-7-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use require_command() so that the test will return SKIP (4) when a
required command is not present.
Before:
# ./traceroute.sh
SKIP: Could not run IPV6 test without traceroute6
SKIP: Could not run IPV4 test without traceroute
$ echo $?
0
After:
# ./traceroute.sh
TEST: traceroute6 not installed [SKIP]
$ echo $?
4
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-6-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test always returns success even if some tests were modified to
fail. Fix by converting the test to use the appropriate library
functions instead of using its own functions.
Before:
# ./traceroute.sh
TEST: IPV6 traceroute [FAIL]
TEST: IPV4 traceroute [ OK ]
Tests passed: 1
Tests failed: 1
$ echo $?
0
After:
# ./traceroute.sh
TEST: IPv6 traceroute [FAIL]
traceroute6 did not return 2000:102::2
TEST: IPv4 traceroute [ OK ]
$ echo $?
1
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-5-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the "icmp_errors_use_inbound_ifaddr" sysctl is enabled, the source
IP of ICMP error messages should be the "primary address of the
interface that received the packet that caused the icmp error".
The IPv4 ICMP code determines this interface using inet_iif() which in
the input path translates to skb->skb_iif. If the interface that
received the packet is a VRF port, skb->skb_iif will contain the ifindex
of the VRF device and not that of the receiving interface. This is
because in the input path the VRF driver overrides skb->skb_iif with the
ifindex of the VRF device itself (see vrf_ip_rcv()).
As such, the source IP that will be chosen for the ICMP error message is
either an address assigned to the VRF device itself (if present) or an
address assigned to some VRF port, not necessarily the input or output
interface.
This behavior is especially problematic when the error messages are
"Time Exceeded" messages as it means that utilities like traceroute will
show an incorrect packet path.
Solve this by determining the input interface based on the iif field in
the control block, if present. This field is set in the input path to
skb->skb_iif and is not later overridden by the VRF driver, unlike
skb->skb_iif.
This behavior is consistent with the IPv6 counterpart that already uses
the iif from the control block.
Reported-by: Andy Roulin <aroulin@nvidia.com>
Reported-by: Rajkumar Srinivasan <rajsrinivasa@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-4-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
__icmp_send() is used to generate ICMP error messages in response to
various situations such as MTU errors (i.e., "Fragmentation Required")
and too many hops (i.e., "Time Exceeded").
The skb that generated the error does not necessarily come from the IPv4
layer and does not always have a valid IPv4 control block in skb->cb.
Therefore, commit 9ef6b42ad6 ("net: Add __icmp_send helper.") changed
the function to take the IP options structure as argument instead of
deriving it from the skb's control block. Some callers of this function
such as icmp_send() pass the IP options structure from the skb's control
block as in these call paths the control block is known to be valid, but
other callers simply pass a zeroed structure.
A subsequent patch will need __icmp_send() to access more information
from the IPv4 control block (specifically, the ifindex of the input
interface). As a preparation for this change, change the function to
take the IPv4 control block structure as an argument instead of the IP
options structure. This makes the function similar to its IPv6
counterpart that already takes the IPv6 control block structure as an
argument.
No functional changes intended.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250908073238.119240-3-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When __ip_options_compile() is called with an skb, the IP options are
parsed from the skb data into the provided IP option argument. This is
in contrast to the case where the skb argument is NULL and the options
are parsed from opt->__data.
Given that cipso_v4_error() always passes an skb to
__ip_options_compile(), there is no need to allocate an extra 40 bytes
(maximum IP options size).
Therefore, simplify the function by removing these extra bytes and make
the function similar to ipv4_send_dest_unreach() which also calls both
__ip_options_compile() and __icmp_send().
This is a preparation for changing the arguments being passed to
__icmp_send().
No functional changes intended.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250908073238.119240-2-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, MCA initialization is executed identically on each CPU as
they are brought online. However, a number of MCA initialization tasks
only need to be done once.
Define a function to collect all 'global' init tasks and call this from
the BSP only. Start with CPU features.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250908-wip-mca-updates-v6-0-eef5d6c74b9c@amd.com
Set the CR4.MCE bit as the last step during init. This brings the MCA
init order closer to what is described in the x86 docs.
x86 docs:
AMD Intel
MCG_CTL
MCA_CONFIG MCG_EXT_CTL
MCi_CTL MCi_CTL
MCG_CTL
CR4.MCE CR4.MCE
Current Linux:
AMD Intel
CR4.MCE CR4.MCE
MCG_CTL MCG_CTL
MCA_CONFIG MCG_EXT_CTL
MCi_CTL MCi_CTL
Updated Linux:
AMD Intel
MCG_CTL MCG_CTL
MCA_CONFIG MCG_EXT_CTL
MCi_CTL MCi_CTL
CR4.MCE CR4.MCE
The new init flow will match Intel's docs, but there will still be a
mismatch for AMD regarding MCG_CTL. However, there is no known issue with this
ordering, so leave it for now.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/20250908-wip-mca-updates-v6-0-eef5d6c74b9c@amd.com
Jakub Kicinski says:
====================
net: xdp: handle frags with unreadable memory
Make XDP helpers compatible with unreadable memory. This is very
similar to how we handle pfmemalloc frags today. Record the info
in xdp_buf flags as frags get added and then update the skb once
allocated.
This series adds the unreadable memory metadata tracking to drivers
using xdp_build_skb_from*() with no changes on the driver side - hence
the only driver changes here are refactoring. Obviously, unreadable memory
is incompatible with XDP today, but thanks to xdp_build_skb_from_buf()
increasing number of drivers have a unified datapath, whether XDP is
enabled or not.
RFC: https://lore.kernel.org/20250812161528.835855-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250905221539.2930285-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We don't expect frags with unreadable memory to be presented
to XDP programs today, but the XDP helpers are designed to be
usable whether XDP is enabled or not. Support handling frags
with unreadable memory.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250905221539.2930285-3-kuba@kernel.org
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
xdp_update_skb_shared_info() needs to update skb state which
was maintained in xdp_buff / frame. Pass full flags into it,
instead of breaking it out bit by bit. We will need to add
a bit for unreadable frags (even tho XDP doesn't support
those the driver paths may be common), at which point almost
all call sites would become:
xdp_update_skb_shared_info(skb, num_frags,
sinfo->xdp_frags_size,
MY_PAGE_SIZE * num_frags,
xdp_buff_is_frag_pfmemalloc(xdp),
xdp_buff_is_frag_unreadable(xdp));
Keep a helper for accessing the flags, in case we need to
transform them somehow in the future (e.g. to cover up xdp_buff
vs xdp_frame differences).
While we are touching call callers - rename the helper to
xdp_update_skb_frags_info(), previous name may have implied that
it's shinfo that's updated. We are updating flags in struct sk_buff
based on frags that got attched.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20250905221539.2930285-2-kuba@kernel.org
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hsr_get_port_ndev calls hsr_for_each_port, which need to hold rcu lock.
On the other hand, before return the port device, we need to hold the
device reference to avoid UaF in the caller function.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 9c10dd8eed ("net: hsr: Create and export hsr_get_port_ndev()")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250905091533.377443-4-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hsr_port_get_hsr() iterates over ports using hsr_for_each_port(),
but many of its callers do not hold the required RCU lock.
Switch to hsr_for_each_port_rtnl(), since most callers already hold
the rtnl lock. After review, all callers are covered by either the rtnl
lock or the RCU lock, except hsr_dev_xmit(). Fix this by adding an
RCU read lock there.
Fixes: c5a7591172 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250905091533.377443-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hsr_for_each_port is called in many places without holding the RCU read
lock, this may trigger warnings on debug kernels. Most of the callers
are actually hold rtnl lock. So add a new helper hsr_for_each_port_rtnl
to allow callers in suitable contexts to iterate ports safely without
explicit RCU locking.
This patch only fixed the callers that is hold rtnl lock. Other caller
issues will be fixed in later patches.
Fixes: c5a7591172 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250905091533.377443-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ACPM PMIC command handlers returned a u8 value when they should
have returned either zero or negative error codes.
Translate the APM PMIC errno to linux errno.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-input/aElHlTApXj-W_o1r@stanley.mountain/
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Cc: stable@vger.kernel.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add support in the OP-TEE backend driver for dynamic protected memory
allocation using the SMC ABI.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Add support in the OP-TEE backend driver dynamic protected memory
allocation with FF-A.
The protected memory pools for dynamically allocated protected memory
are instantiated when requested by user-space. This instantiation can
fail if OP-TEE doesn't support the requested use-case of protected
memory.
Restricted memory pools based on a static carveout or dynamic allocation
can coexist for different use-cases. We use only dynamic allocation with
FF-A.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Add support in the OP-TEE backend driver for protected memory
allocation. The support is limited to only the SMC ABI and for secure
video buffers.
OP-TEE is probed for the range of protected physical memory and a
memory pool allocator is initialized if OP-TEE have support for such
memory.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Add tee_shm_alloc_dma_mem() to allocate DMA memory. The memory is
represented by a tee_shm object using the new flag TEE_SHM_DMA_MEM to
identify it as DMA memory. The allocated memory will later be lent to
the TEE to be used as protected memory.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Add a userspace API to create a tee_shm object that refers to a dmabuf
reference.
Userspace registers the dmabuf file descriptor as in a tee_shm object.
The registration is completed with a tee_shm returned file descriptor.
Userspace is free to close the dmabuf file descriptor after it has been
registered since all the resources are now held via the new tee_shm
object.
Closing the tee_shm file descriptor will eventually release all
resources used by the tee_shm object when all references are released.
The new IOCTL, TEE_IOC_SHM_REGISTER_FD, supports dmabuf references to
physically contiguous memory buffers. Dmabuf references acquired from
the TEE DMA-heap can be used as protected memory for Secure Video Path
and such use cases. It depends on the TEE and the TEE driver if dmabuf
references acquired by other means can be used.
A new tee_shm flag is added to identify tee_shm objects built from a
registered dmabuf, TEE_SHM_DMA_BUF.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Olivier Masse <olivier.masse@nxp.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Break out the memref handling into a separate helper function.
No change in behavior.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Implement DMA heap for protected DMA-buf allocation in the TEE
subsystem.
Protected memory refers to memory buffers behind a hardware enforced
firewall. It is not accessible to the kernel during normal circumstances
but rather only accessible to certain hardware IPs or CPUs executing in
higher or differently privileged mode than the kernel itself. This
interface allows to allocate and manage such protected memory buffers
via interaction with a TEE implementation.
The protected memory is allocated for a specific use-case, like Secure
Video Playback, Trusted UI, or Secure Video Recording where certain
hardware devices can access the memory.
The DMA-heaps are enabled explicitly by the TEE backend driver. The TEE
backend drivers needs to implement protected memory pool to manage the
protected memory.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Export the dma-buf heap functions to allow them to be used by the OP-TEE
driver. The OP-TEE driver wants to register and manage specific secure
DMA heaps with it.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Update the header files describing the secure world ABI, both with and
without FF-A. The ABI is extended to deal with protected memory, but as
usual backward compatible.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
The VESA AUX backlight fails to be enable luminance based backlight
mainpulation becaused luminance_set is false by default.
Fix it by using luminance support control capabitliy.
Fixes: e13af5166a ("drm/i915/backlight: Use drm helper to initialize edp backlight")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250823121647.275834-1-aaron.ma@canonical.com
There are currently no kernel tests that verify setting and getting
options of the team driver.
In the future, options may be added that implicitly change other
options, which will make it useful to have tests like these that show
nothing breaks. There will be a follow up patch to this that adds new
"rx_enabled" and "tx_enabled" options, which will implicitly affect the
"enabled" option value and vice versa.
The tests use teamnl to first set options to specific values and then
gets them to compare to the set values.
Signed-off-by: Marc Harvey <marcharvey@google.com>
Link: https://patch.msgid.link/20250905040441.2679296-1-marcharvey@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a gpu node to the rock64 board to enable the Mali GPU and
move the existing node from roc-pc to the shared roc dtsi to
enable it also for the roc-cc board.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64
Link: https://lore.kernel.org/r/20250906120810.1833016-2-christianshewitt@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add GPU powerdomain, opp-table, and cooling map nodes for the Mali
GPU on the RK3328 SoC. Opp-table frequencies are sourced from the
Rockchip Linux v4.4 vendor kernel while voltages have been derived
from practical use and support work: keeping voltage above 1075mV
and disabling the 500MHz opp-point avoids instability and crashes.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Diederik de Haas <didi.debian@cknow.org> # Rock64
Link: https://lore.kernel.org/r/20250906120810.1833016-1-christianshewitt@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RK3576 EVB1 has a RTL8211F PHY for each GMAC interface with
a dedicated reset line and the 25MHz clock provided by the SoC.
The current description results in non-working Ethernet as the
clocks are only enabled by the PHY driver, but probing the right
PHY driver currently requires that the PHY ID register can be read
for automatic identification.
This fixes up the network description to get the network functionality
working reliably and cleans up usage of deprecated DT properties while
at it.
Fixes: f135a1a073 ("arm64: dts: rockchip: Add rk3576 evb1 board")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250910-rk3576-evb-network-v1-1-68ed4df272a2@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable Panther Lake platforms to achieve PMC information from
Intel PMC SSRAM Telemetry driver and substate requirements data
from telemetry region.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20250910210629.11198-6-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support to read and show S0ix blocker substate requirements.
Starting from Panther Lake, substate requirement data is provided
based on S0ix blockers instead of all low power mode requirements.
For platforms that support this new feature, add support to display
substate requirements based on S0ix blockers.
Change the "substate_requirements" attribute of Intel PMC Core
driver to show the substate requirements for each S0ix blocker
and the corresponding S0ix blocker value.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20250910210629.11198-5-xi.pardee@linux.intel.com
[ij: rename pmc_index -> pmc_idx]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Refactor pmc_core_substate_req_header_show() to accept a new argument.
This is a preparation patch to introduce a new way to show Low Power
Mode substate requirement data for platforms starting from Panther
Lake. Increased the size for the name column as the Low Power Mode
requirement register name is longer in newer platforms.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20250910210629.11198-4-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move telemetry endpoint handling to pmc_core_get_telem_info(). This
is a preparation patch to introduce a new table to obtain Low Power
Mode substate requirement data for platforms starting from Panther
Lake.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250910210629.11198-3-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Enable Lunar Lake platforms to achieve PMC information from
Intel PMC SSRAM Telemetry driver and substate requirements data
from telemetry region.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250910210629.11198-2-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This patch adds debug logging capabilities to monitor early pending
requests and their associated custom BIOS inputs during runtime.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-10-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Call the amd_pmf_invoke_cmd_enact() function to manage early pending
requests and their associated custom BIOS inputs. Add a return statement
for cases of failure.
The PMF driver will adjust power settings according to custom BIOS inputs
after assessing the policy conditions.
Also, add a new common routine amd_pmf_handle_early_preq() to handle early
BIOS pending requests for both v1 and v2 variants.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-9-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The current code fails to send multiple BIOS input data to the PMF-TA
for policy condition evaluation. Only the most recent BIOS input data is
properly sent to the PMF-TA, while previous inputs are overwritten with
the zeros.
To address this issue, the BIOS input data should be stored and passed on
to the PMF-TA.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-8-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The PMF ACPI Specification (APMF) has been revised to version 1.3 to allow
for additional custom BIOS inputs, enabling OEMs to have more precise
thermal management of the system. This update includes adding support to
the driver using the new data structure received from the BIOS through the
existing APMF interfaces.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-7-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Implement a helper function to check if BIOS input notifications are
enabled or disabled.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-6-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The latest PMF TA has been updated with the additional structure members
for internal evaluation. Since this same structure is utilized in the
driver, it also needs to be updated on the driver side. Otherwise, there
will be a mismatch in the byte sizes when copying data from shared memory.
Suggested-by: Yijun Shen <Yijun.Shen@dell.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-5-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The existing amd_pmf driver is limited to supporting just two custom BIOS
inputs. However, with the updates to the latest PMF TA, there's a
requirement to broaden this capacity to handle 10 inputs, aligning with
the TA firmware's capabilities.
The necessary logic should be implemented to facilitate this expansion of
functionality.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Originally, the 'amd_pmf_get_custom_bios_inputs()' function was written
under the assumption that the BIOS would only send a single pending
request for the driver to process. However, following OEM enablement, it
became clear that multiple pending requests for custom BIOS inputs might
be sent at the same time, a scenario that the current code logic does not
support when it comes to handling multiple custom BIOS inputs.
To address this, the code logic needs to be improved to not only manage
multiple simultaneous custom BIOS inputs but also to ensure it is scalable
for future additional inputs.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The most recent PMF Trusted Application includes enhanced features that
allow for modifications to PMF thermal parameters such as PPT and PPT APU.
This update introduces the necessary driver support to utilize these
capabilities.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
TQMa91xx series is using NXP i.MX91 CPU on an LGA or socketable type board.
MBa91xxCA is a starterkit base board for TQMa91xx on an adapter board.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
