This reverts commit 0e89ca13ee.
The functional change that depended on this refactoring has been found
to be quite problematic. Reverting the whole pile to start fresh when
new fixes are available.
Message-ID: <20250910180930.3679473-3-oliver.upton@linux.dev>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
This reverts commit e9abe311f3.
syzkaller has managed to tease out multiple bugs in this change and
fixing-forward didn't remedy the situation. Considering newly-introduced
memory safety issues the potential for scheduler stalls don't seem that
bad in comparison
Link: https://lore.kernel.org/kvmarm/68c09802.050a0220.3c6139.000d.GAE@google.com/
Message-ID: <20250910180930.3679473-2-oliver.upton@linux.dev>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The static usage pattern of creating a cgroup, enabling controllers,
and then seeding it with CLONE_INTO_CGROUP doesn't require write
locking cgroup_threadgroup_rwsem and thus doesn't benefit from this
patch.
To avoid affecting other users, the per threadgroup rwsem is only used
when the favordynmods is enabled.
As computer hardware advances, modern systems are typically equipped
with many CPU cores and large amounts of memory, enabling the deployment
of numerous applications. On such systems, container creation and
deletion become frequent operations, making cgroup process migration no
longer a cold path. This leads to noticeable contention with common
process operations such as fork, exec, and exit.
To alleviate the contention between cgroup process migration and
operations like process fork, this patch modifies lock to take the write
lock on signal_struct->group_rwsem when writing pid to
cgroup.procs/threads instead of holding a global write lock.
Cgroup process migration has historically relied on
signal_struct->group_rwsem to protect thread group integrity. In commit
<1ed1328792> ("sched, cgroup: replace signal_struct->group_rwsem with
a global percpu_rwsem"), this was changed to a global
cgroup_threadgroup_rwsem. The advantage of using a global lock was
simplified handling of process group migrations. This patch retains the
use of the global lock for protecting process group migration, while
reducing contention by using per thread group lock during
cgroup.procs/threads writes.
The locking behavior is as follows:
write cgroup.procs/threads | process fork,exec,exit | process group migration
------------------------------------------------------------------------------
cgroup_lock() | down_read(&g_rwsem) | cgroup_lock()
down_write(&p_rwsem) | down_read(&p_rwsem) | down_write(&g_rwsem)
critical section | critical section | critical section
up_write(&p_rwsem) | up_read(&p_rwsem) | up_write(&g_rwsem)
cgroup_unlock() | up_read(&g_rwsem) | cgroup_unlock()
g_rwsem denotes cgroup_threadgroup_rwsem, p_rwsem denotes
signal_struct->group_rwsem.
This patch eliminates contention between cgroup migration and fork
operations for threads that belong to different thread groups, thereby
reducing the long-tail latency of cgroup migrations and lowering system
load.
With this patch, under heavy fork and exec interference, the long-tail
latency of cgroup migration has been reduced from milliseconds to
microseconds. Under heavy cgroup migration interference, the multi-CPU
score of the spawn test case in UnixBench increased by 9%.
tj: Update comment in cgroup_favor_dynmods() and switch WARN_ONCE() to
pr_warn_once().
Signed-off-by: Yi Tao <escape@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Later patches will introduce a new parameter `task` to
cgroup_attach_lock, thus adjusting the position of cgroup_attach_lock
within cgroup_procs_write_start.
Between obtaining the threadgroup leader via PID and acquiring the
cgroup attach lock, the threadgroup leader may change, which could lead
to incorrect cgroup migration. Therefore, after acquiring the cgroup
attach lock, we check whether the threadgroup leader has changed, and if
so, retry the operation.
tj: Minor comment adjustments.
Signed-off-by: Yi Tao <escape@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Dynamic cgroup migration involving threadgroup locks can be in one of
two states: no lock held, or holding the global lock. Explicitly
declaring the different lock modes to make the code easier to
understand and facilitates future extensions of the lock modes.
Signed-off-by: Yi Tao <escape@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Introduces the concept of a `ScopedDir`, which allows for the creation
of debugfs directories and files that are tied to the lifetime of a
particular data structure. This ensures that debugfs entries do not
outlive the data they refer to.
The new `Dir::scope` method creates a new directory that is owned by a
`Scope` handle. All files and subdirectories created within this scope
are automatically cleaned up when the `Scope` is dropped.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-6-7d12a165685a@google.com
[ Fix up Result<(), Error> -> Result; fix spurious backtick in
doc-comment. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Adds a new sample driver that demonstrates the debugfs APIs.
The driver creates a directory in debugfs and populates it with a few
files:
- A read-only file that displays a fwnode property.
- A read-write file that exposes an atomic counter.
- A read-write file that exposes a custom struct.
This sample serves as a basic example of how to use the `debugfs::Dir`
and `debugfs::File` APIs to create and manage debugfs entries.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-5-7d12a165685a@google.com
[ Change ACPI ID "LNUXDEBF" to "LNUXBEEF". - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Extends the `debugfs` API to support creating files with content
generated and updated by callbacks. This is done via the
`read_callback_file`, `write_callback_file`, and
`read_write_callback_file` methods.
These methods allow for more flexible file definition, either because
the type already has a `Writer` or `Reader` method that doesn't
do what you'd like, or because you cannot implement it (e.g. because
it's a type defined in another crate or a primitive type).
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-4-7d12a165685a@google.com
[ Fix up Result<(), Error> -> Result. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Extends the `debugfs` API to support creating writable files. This
is done via the `Dir::write_only_file` and `Dir::read_write_file`
methods, which take a data object that implements the `Reader`
trait.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-3-7d12a165685a@google.com
[ Fix up Result<()> -> Result. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Extends the `debugfs` API to support creating read-only files. This
is done via the `Dir::read_only_file` method, which takes a data object
that implements the `Writer` trait.
The file's content is generated by the `Writer` implementation, and the
file is automatically removed when the returned `File` handle is
dropped.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-2-7d12a165685a@google.com
[ Fixup build failure when CONFIG_DEBUGFS=n. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Adds a `debugfs::Dir` type that can be used to create and remove
DebugFS directories. The `Dir` handle automatically cleans up the
directory on `Drop`.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-1-7d12a165685a@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The RK3588 MIPI CSI-2 DPHY variant requires two reset lines. Add support
for different sets of reset lines to the phy-rockchip-inno-csidphy driver
as preparation for the introduction of the RK3588 variant.
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-5-a4f340a7f0cf@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver for the Rockchip MIPI CSI-2 DPHY uses GRF register offset
value 0 to sort out undefined registers. However, the RK3588 CSIDPHY GRF
this offset is perfectly fine (in fact, register 0 is the only one in
this register file).
Introduce a boolean variable to indicate valid registers and allow writes
to register 0.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-4-a4f340a7f0cf@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Rockchip RK3588 variant of the CSI-2 DPHY features two reset lines.
Add the variant and allow for the additional reset.
While at it, fix the description of the first reset in order to avoid
confusion.
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-3-a4f340a7f0cf@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are variants of the Rockchip Innosilicon CSI DPHY (e.g., the RK3568
variant) that are powered on by default as they are part of the ALIVE power
domain.
Remove 'power-domains' from the required properties in order to avoid false
positives.
Fixes: 22c8e0a69b ("dt-bindings: phy: add compatible for rk356x to rockchip-inno-csi-dphy")
Cc: stable@kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-2-a4f340a7f0cf@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Enable support for data lane rates between 80-160 Mbps cdns dphy
as mentioned in TRM [0] by setting the pll_opdiv field to 16.
This change enables lower resolutions like 640x480 at 60Hz.
[0]: https://www.ti.com/lit/zip/spruil1
(Table 12-552. DPHY_TX_PLL_CTRL Register Field Descriptions)
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
Link: https://lore.kernel.org/r/20250807052002.717807-1-h-shenoy@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The external Ethernet PHY has a reset pin that is connected to the SoC.
It is missing from the original submission.
Add it to complete the description.
Fixes: c6800f1599 ("arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250908181059.1785605-9-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The external Ethernet PHY has a reset pin that is connected to the SoC.
It is missing from the original submission.
Add it to complete the description.
Fixes: acca163f3f ("arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250908181059.1785605-7-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
When dual-divider clock support was introduced, the P divider offset was
left out of the .recalc_rate readback function. This causes the clock
rate to become bogus or even zero (possibly due to the P divider being
1, leading to a divide-by-zero).
Fix this by incorporating the P divider offset into the calculation.
Fixes: 45717804b7 ("clk: sunxi-ng: mp: introduce dual-divider clock")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250830170901.1996227-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Document the CPUID reading the different SEV guest types do - the SNP
one which relies on the presence of a CPUID table and the SEV-ES one,
which reads the CPUID supplied by the hypervisor.
The intent being to clarify the two back-to-back, similar CPUID
invocations.
No functional changes.
[ bp: Turn into a proper patch. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/fbb24767-0e06-d1d6-36e0-1757d98aca66@amd.com
Add USB 2.0 PHY driver for Sophgo CV18XX/SG200X. Currently
this driver does not support OTG mode as lack of document.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250708063038.497473-3-inochiama@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The USB phy of Sophgo CV18XX series SoC needs to sense a pin called
"VBUS_DET" to get the right operation mode. If this pin is not
connected, it only supports setting the mode manually.
Add USB phy bindings for Sophgo CV18XX/SG200X series SoC.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250708063038.497473-2-inochiama@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For large values of CONFIG_NR_CPUS, the newly added kunit test fails
to build:
kernel/printk/printk_ringbuffer_kunit_test.c: In function 'test_readerwriter':
kernel/printk/printk_ringbuffer_kunit_test.c:279:1: error: the frame size of 1432 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Change this to use cpumask_var_t and allocate it dynamically when
CONFIG_CPUMASK_OFFSTACK is set.
The variable has to be released via a KUnit action wrapper so that it is
freed when the test fails and gets aborted. The parameter type is hardcoded
to "struct cpumask *" because the macro KUNIT_DEFINE_ACTION_WRAPPER()
does not accept an array. But the function does nothing when
CONFIG_CPUMASK_OFFSTACK is not set anyway.
Fixes: 5ea2bcdfbf ("printk: ringbuffer: Add KUnit test")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/20250620192554.2234184-1-arnd@kernel.org # v1
[pmladek@suse.com: Correctly handle allocation failures and freeing using KUnit test API.]
Link: https://lore.kernel.org/all/20250702095157.110916-3-pmladek@suse.com # v2
Signed-off-by: Petr Mladek <pmladek@suse.com>
Do read-modify-write so that we re-use the characterized reset value as
specified in TRM [1] to program calibration wait time which defines number
of cycles to wait for after startup state machine is in bandgap enable
state.
This fixes PLL lock timeout error faced while using RPi DSI Panel on TI's
AM62L and J721E SoC since earlier calibration wait time was getting
overwritten to zero value thus failing the PLL to lockup and causing
timeout.
[1] AM62P TRM (Section 14.8.6.3.2.1.1 DPHY_TX_DPHYTX_CMN0_CMN_DIG_TBIT2):
Link: https://www.ti.com/lit/pdf/spruj83
Cc: stable@vger.kernel.org
Fixes: 7a343c8bf4 ("phy: Add Cadence D-PHY support")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250704125915.1224738-3-devarsht@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
PLL lockup and O_CMN_READY assertion can only happen after common state
machine gets enabled by programming DPHY_CMN_SSM register, but driver was
polling them before the common state machine was enabled which is
incorrect. This is as per the DPHY initialization sequence as mentioned in
J721E TRM [1] at section "12.7.2.4.1.2.1 Start-up Sequence Timing Diagram".
It shows O_CMN_READY polling at the end after common configuration pin
setup where the common configuration pin setup step enables state machine
as referenced in "Table 12-1533. Common Configuration-Related Setup
mentions state machine"
To fix this :
- Add new function callbacks for polling on PLL lock and O_CMN_READY
assertion.
- As state machine and clocks get enabled in power_on callback only, move
the clock related programming part from configure callback to power_on
callback and poll for the PLL lockup and O_CMN_READY assertion after state
machine gets enabled.
- The configure callback only saves the PLL configuration received from the
client driver which will be applied later on in power_on callback.
- Add checks to ensure configure is called before power_on and state
machine is in disabled state before power_on callback is called.
- Disable state machine in power_off so that client driver can re-configure
the PLL by following up a power_off, configure, power_on sequence.
[1]: https://www.ti.com/lit/zip/spruil1
Cc: stable@vger.kernel.org
Fixes: 7a343c8bf4 ("phy: Add Cadence D-PHY support")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250704125915.1224738-2-devarsht@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On R-Car Gen3 using PSCI, s2ram powers down the SoC. After resume, the
CAN interface no longer works, until it is brought down and up again.
Fix this by calling rcar_can_start() from the PM resume callback, to
fully initialize the controller instead of just restarting it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/699b2f7fcb60b31b6f976a37f08ce99c5ffccb31.1755165227.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can_put_echo_skb() takes ownership of the SKB and it may be freed
during or after the call.
However, xilinx_can xcan_write_frame() keeps using SKB after the call.
Fix that by only calling can_put_echo_skb() after the code is done
touching the SKB.
The tx_lock is held for the entire xcan_write_frame() execution and
also on the can_get_echo_skb() side so the order of operations does not
matter.
An earlier fix commit 3d3c817c3a ("can: xilinx_can: Fix usage of skb
memory") did not move the can_put_echo_skb() call far enough.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Fixes: 1598efe57b ("can: xilinx_can: refactor code in preparation for CAN FD support")
Link: https://patch.msgid.link/20250822095002.168389-1-anssi.hannula@bitwise.fi
[mkl: add "commit" in front of sha1 in patch description]
[mkl: fix indention]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Since j1939_sk_bind() and j1939_sk_release() call j1939_local_ecu_put()
when J1939_SOCK_BOUND was already set, but the error handling path for
j1939_sk_bind() will not set J1939_SOCK_BOUND when j1939_local_ecu_get()
fails, j1939_local_ecu_get() needs to undo priv->ents[sa].nusers++ when
j1939_local_ecu_get() returns an error.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/e7f80046-4ff7-4ce2-8ad8-7c3c678a42c9@I-love.SAKURA.ne.jp
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Commit 25fe97cb76 ("can: j1939: move j1939_priv_put() into sk_destruct
callback") expects that a call to j1939_priv_put() can be unconditionally
delayed until j1939_sk_sock_destruct() is called. But a refcount leak will
happen when j1939_sk_bind() is called again after j1939_local_ecu_get()
from previous j1939_sk_bind() call returned an error. We need to call
j1939_priv_put() before j1939_sk_bind() returns an error.
Fixes: 25fe97cb76 ("can: j1939: move j1939_priv_put() into sk_destruct callback")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/4f49a1bc-a528-42ad-86c0-187268ab6535@I-love.SAKURA.ne.jp
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
syzbot is reporting
unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
problem, for j1939 protocol did not have NETDEV_UNREGISTER notification
handler for undoing changes made by j1939_sk_bind().
Commit 25fe97cb76 ("can: j1939: move j1939_priv_put() into sk_destruct
callback") expects that a call to j1939_priv_put() can be unconditionally
delayed until j1939_sk_sock_destruct() is called. But we need to call
j1939_priv_put() against an extra ref held by j1939_sk_bind() call
(as a part of undoing changes made by j1939_sk_bind()) as soon as
NETDEV_UNREGISTER notification fires (i.e. before j1939_sk_sock_destruct()
is called via j1939_sk_release()). Otherwise, the extra ref on "struct
j1939_priv" held by j1939_sk_bind() call prevents "struct net_device" from
dropping the usage count to 1; making it impossible for
unregister_netdevice() to continue.
Reported-by: syzbot <syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Tested-by: syzbot <syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com>
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Fixes: 25fe97cb76 ("can: j1939: move j1939_priv_put() into sk_destruct callback")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/ac9db9a4-6c30-416e-8b94-96e6559d55b2@I-love.SAKURA.ne.jp
[mkl: remove space in front of label]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
A proper kernel configuration for running kselftest can be obtained with:
$ yes | make kselftest-merge
Build of 'vcan' driver is currently missing, while the other required knobs
are already there because of net/link_netns.py [1]. Add a config file in
selftests/net/can to store the minimum set of kconfig needed for CAN
selftests.
[1] https://patch.msgid.link/20250219125039.18024-14-shaw.leon@gmail.com
Fixes: 77442ffa83 ("selftests: can: Import tst-filter from can-tests")
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/fa4c0ea262ec529f25e5f5aa9269d84764c67321.1757516009.git.dcaratti@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
ACPICA commit 710745713ad3a2543dbfb70e84764f31f0e46bdc
This has been renamed in more recent CXL specs, as
type3 (memory expanders) can also use HDM-DB for
device coherent memory.
Link: 710745713a
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20250908160034.86471-1-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixed the following typo errors
intersparsed ==> interspersed
in Documentation/driver-api/cxl/platform/bios-and-efi.rst
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Link: https://patch.msgid.link/20250818175335.5312-1-rakuram.e96@gmail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
On systems with multiple GPUs there can be uncertainty which GPU is the
primary one used to drive the display at bootup. In some desktop
environments this can lead to increased power consumption because
secondary GPUs may be used for rendering and never go to a low power
state. In order to disambiguate this add a new sysfs attribute
'boot_display' that uses the output of video_is_primary_device() to
populate whether the PCI device was used for driving the display.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://gitlab.freedesktop.org/xorg/lib/libpciaccess/-/issues/23
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250811162606.587759-5-superm1@kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
On systems with non VGA GPUs fbcon can't find the primary GPU because
video_is_primary_device() only checks the VGA arbiter.
Add a screen info check to video_is_primary_device() so that callers
can get accurate data on such systems.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250811162606.587759-4-superm1@kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
vga_is_firmware_default() checks firmware resources to find the owner
framebuffer resources to find the firmware PCI device. This is an
open coded implementation of screen_info_pci_dev(). Switch to using
screen_info_pci_dev() instead.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250811162606.587759-3-superm1@kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
When compiled without CONFIG_VIDEO the architecture specific
implementations of video_is_primary_device() include prototypes and
assume that video-common.c will be linked. Guard against this so that the
fallback inline implementation that returns false will be used when
compiled without CONFIG_VIDEO.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506221312.49Fy1aNA-lkp@intel.com/
Link: https://lore.kernel.org/r/20250811162606.587759-2-superm1@kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
queue_work() / queue_delayed_work() / mod_delayed_work() will now use the
new unbound wq: whether the user still use the old wq a warn will be
printed along with a wq redirect to the new one.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_wq is a per-CPU worqueue, yet nothing in its name tells about that
CPU affinity constraint, which is very often not required by users. Make
it clear by adding a system_percpu_wq.
queue_work() / queue_delayed_work() mod_delayed_work() will now use the
new per-cpu wq: whether the user still stick on the old name a warn will
be printed along a wq redirect to the new one.
This patch add the new system_percpu_wq except for mm, fs and net
subsystem, whom are handled in separated patches.
The old wq will be kept for a few release cylces.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add ethernet aliases to CC (Carrier card) description to create a
connection which is used by U-BOOT (fdt_fixup_ethernet()) for updating
local-mac-address in DT.
On Kria SOM MAC address is read from i2c eeprom at start and based on it
environment variables are created. Without creating aliases U-Boot is not
able to inject local-mac-address DT property and OS won't get the same MAC
address unless another i2c read is happening in OS.
Also aliases are using string not phandle (because of dtso) that's why full
path has to be provided but that shouldn't be a big issue because location
of ethernet controller is fixed.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/72304150f87fd5e3338e31e2be8cf5d29955cc02.1756799774.git.michal.simek@amd.com
On a few zcu106 boards USB devices (Dell MS116 USB Optical Mouse, Dell USB
Entry Keyboard) are not enumerated on linux boot due to commit
'b8745e7eb488 ("arm64: zynqmp: Fix usb node drive strength and slew
rate")'.
To fix it as a workaround revert to working version and then investigate
at board level why drive strength from 12mA to 4mA and slew from fast to
slow is not working.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/85a70cb014ec1f07972fccb60b875596eeaa6b5c.1756799774.git.michal.simek@amd.com
syzbot reported the splat below. [0]
The repro does the following:
1. Load a sk_msg prog that calls bpf_msg_cork_bytes(msg, cork_bytes)
2. Attach the prog to a SOCKMAP
3. Add a socket to the SOCKMAP
4. Activate fault injection
5. Send data less than cork_bytes
At 5., the data is carried over to the next sendmsg() as it is
smaller than the cork_bytes specified by bpf_msg_cork_bytes().
Then, tcp_bpf_send_verdict() tries to allocate psock->cork to hold
the data, but this fails silently due to fault injection + __GFP_NOWARN.
If the allocation fails, we need to revert the sk->sk_forward_alloc
change done by sk_msg_alloc().
Let's call sk_msg_free() when tcp_bpf_send_verdict fails to allocate
psock->cork.
The "*copied" also needs to be updated such that a proper error can
be returned to the caller, sendmsg. It fails to allocate psock->cork.
Nothing has been corked so far, so this patch simply sets "*copied"
to 0.
[0]:
WARNING: net/ipv4/af_inet.c:156 at inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156, CPU#1: syz-executor/5983
Modules linked in:
CPU: 1 UID: 0 PID: 5983 Comm: syz-executor Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156
Code: 0f 0b 90 e9 62 fe ff ff e8 7a db b5 f7 90 0f 0b 90 e9 95 fe ff ff e8 6c db b5 f7 90 0f 0b 90 e9 bb fe ff ff e8 5e db b5 f7 90 <0f> 0b 90 e9 e1 fe ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 9f fc
RSP: 0018:ffffc90000a08b48 EFLAGS: 00010246
RAX: ffffffff8a09d0b2 RBX: dffffc0000000000 RCX: ffff888024a23c80
RDX: 0000000000000100 RSI: 0000000000000fff RDI: 0000000000000000
RBP: 0000000000000fff R08: ffff88807e07c627 R09: 1ffff1100fc0f8c4
R10: dffffc0000000000 R11: ffffed100fc0f8c5 R12: ffff88807e07c380
R13: dffffc0000000000 R14: ffff88807e07c60c R15: 1ffff1100fc0f872
FS: 00005555604c4500(0000) GS:ffff888125af1000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005555604df5c8 CR3: 0000000032b06000 CR4: 00000000003526f0
Call Trace:
<IRQ>
__sk_destruct+0x86/0x660 net/core/sock.c:2339
rcu_do_batch kernel/rcu/tree.c:2605 [inline]
rcu_core+0xca8/0x1770 kernel/rcu/tree.c:2861
handle_softirqs+0x286/0x870 kernel/softirq.c:579
__do_softirq kernel/softirq.c:613 [inline]
invoke_softirq kernel/softirq.c:453 [inline]
__irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:680
irq_exit_rcu+0x9/0x30 kernel/softirq.c:696
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1052 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1052
</IRQ>
Fixes: 4f738adba3 ("bpf: create tcp_bpf_ulp allowing BPF to monitor socket TX/RX data")
Reported-by: syzbot+4cabd1d2fa917a456db8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68c0b6b5.050a0220.3c6139.0013.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250909232623.4151337-1-kuniyu@google.com
The Snapdragon 660 has a Low-Power Island (LPI) TLMM for configuring
pins related to audio. Add the driver for this.
Also, this driver uses predefined pin_offsets for each pin taken from
downstream driver, which does not follow the usual 0x1000 distance
between pins and uses an array with predefined offsets that do not
follow any regular pattern [1].
[1] https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/LA.UM.7.2.c27-07400-sdm660.0/drivers/pinctrl/qcom/pinctrl-lpi.c#L107
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Co-developed-by: Nickolay Goppen <setotau@mainlining.org>
Signed-off-by: Nickolay Goppen <setotau@mainlining.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
