Commit graph

1,398,251 commits

Author SHA1 Message Date
Ville Syrjälä
c315fbfa44 drm/i915: Enable 10bpc + CCS on TGL+
TGL+ support 10bpc compressed scanout. Enable it.

v2: Set .depth=30 for all variants to match drm_fourcc.c
    Set clear color block size to 0x0

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918144445.5716-4-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2024-10-09 19:07:05 +03:00
Ville Syrjälä
0ddae025ab drm/i915: Disable compression tricks on JSL
Bspec asks us to disable some compression trick on JSL. While the
bspec description is pretty vague it looks like this is some extra
trick for 10bpc+ CCS which presumably the ICL derived display engine
doesn't support.

Note that we aren't currently exposing 10bpc CCS scanout support,
but once that gets added this presumably becomes an issue.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918144445.5716-3-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2024-10-09 19:04:24 +03:00
Mark Rutland
13f8f1e05f arm64: probes: Fix uprobes for big-endian kernels
The arm64 uprobes code is broken for big-endian kernels as it doesn't
convert the in-memory instruction encoding (which is always
little-endian) into the kernel's native endianness before analyzing and
simulating instructions. This may result in a few distinct problems:

* The kernel may may erroneously reject probing an instruction which can
  safely be probed.

* The kernel may erroneously erroneously permit stepping an
  instruction out-of-line when that instruction cannot be stepped
  out-of-line safely.

* The kernel may erroneously simulate instruction incorrectly dur to
  interpretting the byte-swapped encoding.

The endianness mismatch isn't caught by the compiler or sparse because:

* The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so
  the compiler and sparse have no idea these contain a little-endian
  32-bit value. The core uprobes code populates these with a memcpy()
  which similarly does not handle endianness.

* While the uprobe_opcode_t type is an alias for __le32, both
  arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[]
  to the similarly-named probe_opcode_t, which is an alias for u32.
  Hence there is no endianness conversion warning.

Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and
adding the appropriate __le32_to_cpu() conversions prior to consuming
the instruction encoding. The core uprobes copies these fields as opaque
ranges of bytes, and so is unaffected by this change.

At the same time, remove MAX_UINSN_BYTES and consistently use
AARCH64_INSN_SIZE for clarity.

Tested with the following:

| #include <stdio.h>
| #include <stdbool.h>
|
| #define noinline __attribute__((noinline))
|
| static noinline void *adrp_self(void)
| {
|         void *addr;
|
|         asm volatile(
|         "       adrp    %x0, adrp_self\n"
|         "       add     %x0, %x0, :lo12:adrp_self\n"
|         : "=r" (addr));
| }
|
|
| int main(int argc, char *argv)
| {
|         void *ptr = adrp_self();
|         bool equal = (ptr == adrp_self);
|
|         printf("adrp_self   => %p\n"
|                "adrp_self() => %p\n"
|                "%s\n",
|                adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL");
|
|         return 0;
| }

.... where the adrp_self() function was compiled to:

| 00000000004007e0 <adrp_self>:
|   4007e0:       90000000        adrp    x0, 400000 <__ehdr_start>
|   4007e4:       911f8000        add     x0, x0, #0x7e0
|   4007e8:       d65f03c0        ret

Before this patch, the ADRP is not recognized, and is assumed to be
steppable, resulting in corruption of the result:

| # ./adrp-self
| adrp_self   => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self   => 0x4007e0
| adrp_self() => 0xffffffffff7e0
| NOT EQUAL

After this patch, the ADRP is correctly recognized and simulated:

| # ./adrp-self
| adrp_self   => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| #
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self   => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL

Fixes: 9842ceae9f ("arm64: Add uprobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-10-09 16:56:53 +01:00
Mark Rutland
50f813e576 arm64: probes: Fix simulate_ldr*_literal()
The simulate_ldr_literal() code always loads a 64-bit quantity, and when
simulating a 32-bit load into a 'W' register, it discards the most
significant 32 bits. For big-endian kernels this means that the relevant
bits are discarded, and the value returned is the the subsequent 32 bits
in memory (i.e. the value at addr + 4).

Additionally, simulate_ldr_literal() and simulate_ldrsw_literal() use a
plain C load, which the compiler may tear or elide (e.g. if the target
is the zero register). Today this doesn't happen to matter, but it may
matter in future if trampoline code uses a LDR (literal) or LDRSW
(literal).

Update simulate_ldr_literal() and simulate_ldrsw_literal() to use an
appropriately-sized READ_ONCE() to perform the access, which avoids
these problems.

Fixes: 39a67d49ba ("arm64: kprobes instruction simulation support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-10-09 16:56:53 +01:00
Mark Rutland
acc450aa07 arm64: probes: Remove broken LDR (literal) uprobe support
The simulate_ldr_literal() and simulate_ldrsw_literal() functions are
unsafe to use for uprobes. Both functions were originally written for
use with kprobes, and access memory with plain C accesses. When uprobes
was added, these were reused unmodified even though they cannot safely
access user memory.

There are three key problems:

1) The plain C accesses do not have corresponding extable entries, and
   thus if they encounter a fault the kernel will treat these as
   unintentional accesses to user memory, resulting in a BUG() which
   will kill the kernel thread, and likely lead to further issues (e.g.
   lockup or panic()).

2) The plain C accesses are subject to HW PAN and SW PAN, and so when
   either is in use, any attempt to simulate an access to user memory
   will fault. Thus neither simulate_ldr_literal() nor
   simulate_ldrsw_literal() can do anything useful when simulating a
   user instruction on any system with HW PAN or SW PAN.

3) The plain C accesses are privileged, as they run in kernel context,
   and in practice can access a small range of kernel virtual addresses.
   The instructions they simulate have a range of +/-1MiB, and since the
   simulated instructions must itself be a user instructions in the
   TTBR0 address range, these can address the final 1MiB of the TTBR1
   acddress range by wrapping downwards from an address in the first
   1MiB of the TTBR0 address range.

   In contemporary kernels the last 8MiB of TTBR1 address range is
   reserved, and accesses to this will always fault, meaning this is no
   worse than (1).

   Historically, it was theoretically possible for the linear map or
   vmemmap to spill into the final 8MiB of the TTBR1 address range, but
   in practice this is extremely unlikely to occur as this would
   require either:

   * Having enough physical memory to fill the entire linear map all the
     way to the final 1MiB of the TTBR1 address range.

   * Getting unlucky with KASLR randomization of the linear map such
     that the populated region happens to overlap with the last 1MiB of
     the TTBR address range.

   ... and in either case if we were to spill into the final page there
   would be larger problems as the final page would alias with error
   pointers.

Practically speaking, (1) and (2) are the big issues. Given there have
been no reports of problems since the broken code was introduced, it
appears that no-one is relying on probing these instructions with
uprobes.

Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW
(literal), limiting the use of simulate_ldr_literal() and
simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR
(literal) and LDRSW (literal) will be rejected as
arm_probe_decode_insn() will return INSN_REJECTED. In future we can
consider introducing working uprobes support for these instructions, but
this will require more significant work.

Fixes: 9842ceae9f ("arm64: Add uprobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-10-09 16:56:53 +01:00
Thomas Richard
590bcce85e MAINTAINERS: Add entry for Congatec Board Controller
Add the Congatec Board Controller drivers and header as Maintained by
myself.

Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-5-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 16:32:13 +01:00
Thomas Richard
6f26404786 watchdog: Congatec Board Controller watchdog timer driver
Add watchdog timer support for the Congatec Board Controller.

Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-4-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 16:32:11 +01:00
Thomas Richard
6894f640b8 i2c: Congatec Board Controller i2c bus driver
Add i2c support for the Congatec Board Controller.

The Board Controller has two i2c busses, a General Purpose bus and a Power
Management bus.

Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-3-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 16:32:08 +01:00
Thomas Richard
4342bf63b6 gpio: Congatec Board Controller gpio driver
Add gpio support for the Congatec Board Controller.
This Board Controller has 14 GPIO pins.

The driver is probed by the Congatec Board Controller MFD driver.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-2-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 16:32:04 +01:00
Thomas Richard
6f1067cfbe mfd: Add Congatec Board Controller driver
Add core MFD driver for the Board Controller found on some Congatec SMARC
module. This Board Controller provides functions like watchdog, GPIO, and
I2C busses.

This commit adds support only for the conga-SA7 module.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-1-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 16:31:48 +01:00
R Sundar
4c93ede2b0 drm: Fix for kernel doc warning
Added colon in kernel-doc comment to fix the warning.

./include/drm/drm_drv.h:372: warning: Incorrect use of kernel-doc format:          * @fbdev_probe
./include/drm/drm_drv.h:435: warning: Function parameter or struct member 'fbdev_probe' not described in 'drm_driver'

Signed-off-by: R Sundar <prosunofficial@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241003023806.17537-1-prosunofficial@gmail.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-09 18:31:38 +03:00
Al Viro
6a8126f077 expand_files(): simplify calling conventions
All callers treat 0 and 1 returned by expand_files() in the same way
now since the call in alloc_fd() had been made conditional.  Just make
it return 0 on success and be done with it...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2024-10-09 11:28:55 -04:00
Al Viro
b8ea429d72 make __set_open_fd() set cloexec state as well
->close_on_exec[] state is maintained only for opened descriptors;
as the result, anything that marks a descriptor opened has to
set its cloexec state explicitly.

As the result, all calls of __set_open_fd() are followed by
__set_close_on_exec(); might as well fold it into __set_open_fd()
so that cloexec state is defined as soon as the descriptor is
marked opened.

[braino fix folded]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2024-10-09 11:28:06 -04:00
Basavaraj Natikar
c56f9ecb7f HID: amd_sfh: Switch to device-managed dmam_alloc_coherent()
Using the device-managed version allows to simplify clean-up in probe()
error path.

Additionally, this device-managed ensures proper cleanup, which helps to
resolve memory errors, page faults, btrfs going read-only, and btrfs
disk corruption.

Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Tested-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Tested-by: Richard <hobbes1069@gmail.com>
Tested-by: Skyler <skpu@pm.me>
Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Closes: https://lore.kernel.org/all/3b129b1f-8636-456a-80b4-0f6cce0eef63@hixontech.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219331
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-10-09 17:18:57 +02:00
Vasiliy Kovalev
9988844c45 ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2
There is a problem with simultaneous audio output to headphones and
speakers, and when headphones are turned off, the speakers also turn
off and do not turn them on.

However, it was found that if you boot linux immediately after windows,
there are no such problems. When comparing alsa-info, the only difference
is the different configuration of Node 0x1d:

working conf. (windows): Pin-ctls: 0x80: HP
not working     (linux): Pin-ctls: 0xc0: OUT HP

This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the
described problem.

Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241009134248.662175-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-10-09 16:56:22 +02:00
Dr. David Alan Gilbert
5461f3fd74 backlight: Remove notifier
backlight_register_notifier and backlight_unregister_notifier have
been unused since commit 6cb634d0dc ("ACPI: video: Remove code to
unregister acpi_video backlight when a native backlight registers")

With those not being called, it means that the backlight_notifier
list is always empty.

Remove the functions, the list itself and the enum used in the
notifications.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20240919232758.639925-1-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:42:48 +01:00
Jani Nikula
3639fadc7e drm/imx: add forward declarations for types
The imx.h header does not forward declare the types it uses, and the
header is not self-contained. Fix it.

Fixes: cc3e8a216d ("drm/imx: add internal bridge handling display-timings DT node")
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: imx@lists.linux.dev
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009140452.1981175-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-09 17:39:49 +03:00
Javier Carrasco
3cfd6ad3e1 leds: turris-omnia: Remove unused local leds.h
This driver does not require any element from the local leds.h. Drop
unused header.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_unused_leds_h-v1-6-46fbf41ed4ae@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:37:34 +01:00
Javier Carrasco
9fd316962a leds: pwm: Remove unused local leds.h
Commit 156a5bb89c ("leds: Move led_init_default_state_get() to the
global header") moved the only element leds-gpio required from the local
leds.h to its global counterpart. Drop the inclusion of the local leds.h
as it is no longer used.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_unused_leds_h-v1-5-46fbf41ed4ae@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:37:34 +01:00
Javier Carrasco
d1aa93196c leds: lp50xx: Remove unused local leds.h
This driver does not require any element from the local leds.h. Drop
unused header.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_unused_leds_h-v1-4-46fbf41ed4ae@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:37:34 +01:00
Javier Carrasco
e7160d5ee3 leds: gpio: Remove unused local leds.h
Commit 156a5bb89c ("leds: Move led_init_default_state_get() to the
global header") moved the only element leds-gpio required from the local
leds.h to its global counterpart. Drop the inclusion of the local leds.h
as it is no longer used.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_unused_leds_h-v1-3-46fbf41ed4ae@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:37:34 +01:00
Javier Carrasco
026432e7c2 leds: multicolor: Remove unused local leds.h
This driver does not require any element from the local leds.h. Drop
unused header.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_unused_leds_h-v1-2-46fbf41ed4ae@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:37:34 +01:00
Javier Carrasco
827a0a3724 leds: flash: Remove unused local leds.h
This driver does not require any element from the local leds.h. Drop
unused header.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_unused_leds_h-v1-1-46fbf41ed4ae@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:37:33 +01:00
Jani Nikula
c3e91446a3 drm/file: fix client_name_lock kernel-doc warning
It's client_name_lock, not name_lock. Also unify style while at it.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20241009172650.29169e6f@canb.auug.org.au
Fixes: 56c594d8df ("drm: add DRM_SET_CLIENT_NAME ioctl")
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009140300.1980746-1-jani.nikula@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
2024-10-09 16:30:37 +02:00
Niklas Cassel
a38719e315 ata: libata: avoid superfluous disk spin down + spin up during hibernation
A user reported that commit aa3998dbeb ("ata: libata-scsi: Disable scsi
device manage_system_start_stop") introduced a spin down + immediate spin
up of the disk both when entering and when resuming from hibernation.
This behavior was not there before, and causes an increased latency both
when entering and when resuming from hibernation.

Hibernation is done by three consecutive PM events, in the following order:
1) PM_EVENT_FREEZE
2) PM_EVENT_THAW
3) PM_EVENT_HIBERNATE

Commit aa3998dbeb ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") modified ata_eh_handle_port_suspend() to call
ata_dev_power_set_standby() (which spins down the disk), for both event
PM_EVENT_FREEZE and event PM_EVENT_HIBERNATE.

Documentation/driver-api/pm/devices.rst, section "Entering Hibernation",
explicitly mentions that PM_EVENT_FREEZE does not have to be put the device
in a low-power state, and actually recommends not doing so. Thus, let's not
spin down the disk on PM_EVENT_FREEZE. (The disk will instead be spun down
during the subsequent PM_EVENT_HIBERNATE event.)

This way, PM_EVENT_FREEZE will behave as it did before commit aa3998dbeb
("ata: libata-scsi: Disable scsi device manage_system_start_stop"), while
PM_EVENT_HIBERNATE will continue to spin down the disk.

This will avoid the superfluous spin down + spin up when entering and
resuming from hibernation, while still making sure that the disk is spun
down before actually entering hibernation.

Cc: stable@vger.kernel.org # v6.6+
Fixes: aa3998dbeb ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241008135843.1266244-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-10-09 16:21:19 +02:00
Javier Carrasco
bf3fba7276 leds: rgb: mt6370: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

After switching to the scoped variant, there is no longer need for a
jump to 'fwnode_release', as an immediate return is possible. Given that
the loop is called in the probe function, and it already uses
dev_err_probe(), the common "dev_err() + return" has been updated as
well.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-18-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:19:22 +01:00
Javier Carrasco
48259638fe leds: rgb: ktd202x: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error path.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-17-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:19:16 +01:00
Javier Carrasco
01728d0419 leds: tca6507: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error path.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-16-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:19:09 +01:00
Javier Carrasco
8cf103de9a leds: sun50i-a100: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

The error handling after 'err_put_child' has been moved to the only goto
that jumps to it (second device_for_each_child_node()), and the call to
fwnode_handle_put() has been removed accordingly.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-15-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:19:02 +01:00
Javier Carrasco
e345607185 leds: pwm: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

After switching to the scoped variant, there is no longer need for a
jump to 'err_child_out', as an immediate return is possible.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-14-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:18:51 +01:00
Javier Carrasco
dea90acb09 leds: pca963x: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

After switching to the scoped variant, there is no longer need for a
jump to 'err', as an immediate return is possible.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-13-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:18:44 +01:00
Javier Carrasco
5b5d936db0 leds: ns2: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error path.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-12-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:18:37 +01:00
Javier Carrasco
4ab3ae432d leds: max77650: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

After switching to the scoped variant, there is no longer need for a
jump to 'err_node_out', as an immediate return is possible.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-11-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:18:29 +01:00
Javier Carrasco
ba35b9a4c1 leds: lp50xx: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

After switching to the scoped variant, there is no longer need for a
jump to 'child_out', as an immediate return is possible.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-10-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:18:23 +01:00
Javier Carrasco
6e2d1d83b7 leds: lm3697: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

After switching to the scoped variant, there is no longer need for a
jump to 'child_out', as an immediate return is possible.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-9-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:17:27 +01:00
Javier Carrasco
7bd4b9277b leds: lm3532: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

After switching to the scoped variant, there is no longer need for a
jump to 'child_out', as an immediate return is possible.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-8-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:17:20 +01:00
Javier Carrasco
42b4967160 leds: gpio: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-7-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:17:14 +01:00
Javier Carrasco
9e445e28ae leds: el15203000: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

After switching to the scoped variant, there is no longer need for a
jump to 'err_child_out', as an immediate return is possible.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-6-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:17:06 +01:00
Javier Carrasco
65135e2ccf leds: cr0014114: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-5-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:16:59 +01:00
Javier Carrasco
a361af3c16 leds: aw200xx: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-4-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:16:42 +01:00
Javier Carrasco
f64dd42a4f leds: flash: leds-qcom-flash: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-3-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:16:30 +01:00
Javier Carrasco
19d1cc765e leds: flash: mt6370: Switch to device_for_each_child_node_scoped()
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for calls to fwnode_handle_put() in the error paths.

This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-2-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:16:23 +01:00
Javier Carrasco
73b03b2773 leds: flash: mt6360: Fix device_for_each_child_node() refcounting in error paths
The device_for_each_child_node() macro requires explicit calls to
fwnode_handle_put() upon early exits to avoid memory leaks, and in
this case the error paths are handled after jumping to
'out_flash_realease', which misses that required call to
to decrement the refcount of the child node.

A more elegant and robust solution is using the scoped variant of the
loop, which automatically handles such early exits.

Fix the child node refcounting in the error paths by using
device_for_each_child_node_scoped().

Cc: stable@vger.kernel.org
Fixes: 679f865206 ("leds: Add mt6360 driver")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240927-leds_device_for_each_child_node_scoped-v1-1-95c0614b38c8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2024-10-09 15:16:13 +01:00
Gustavo Sousa
081cb8948c drm/xe/xe3: Add initial set of workarounds
Implement the initial set of workarounds for Xe3 IPs.

Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008204626.55802-2-matthew.s.atwood@intel.com
2024-10-09 06:41:46 -07:00
Alexander Usyskin
b1258105f9
spi: intel: Add protected and locked attributes
The manufacturing access to the PCH/SoC SPI device is traditionally
performed via userspace driver accessing registers via /dev/mem but due
to security concerns /dev/mem access is being much restricted, hence the
reason for utilizing dedicated Intel PCH/SoC SPI controller driver,
which is already implemented in the Linux kernel.

Intel PCH/SoC SPI controller protects the flash storage via two
mechanisms one is the via region protection registers and second via
BIOS lock. The BIOS locks only the BIOS regions usually 0 and/or 6.

The device always boots with BIOS lock set, but during manufacturing the
BIOS lock has to be lifted in order to enable the write access. This can
be done by passing "writeable=1" in the command line when the driver is
loaded. This "locked" state is exposed through new sysfs attributes
(intel_spi_locked, intel_spi_bios_locked).

Second, also the region protection status is exposed via sysfs attribute
(intel_spi_protected) as the manufacturing will need the both files in
order to validate that the device is properly sealed.

Includes code written by Tamar Mashiah.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20241009062244.2436793-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-09 14:41:00 +01:00
Binbin Zhou
ba4c5fad59
ASoC: loongson: Add I2S controller driver as platform device
The Loongson I2S controller exists not only in PCI form (LS7A bridge
chip), but also in platform device form (Loongson-2K1000 SoC).

This patch adds support for platform device I2S controller.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/36c143358c7f48bc2e73c30e1d2009b2f2fc6498.1728459624.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-09 14:40:53 +01:00
Binbin Zhou
d4c2e9e33a
ASoC: dt-bindings: Add Loongson I2S controller
Add Loongson I2S controller binding with DT schema format using
json-schema.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/91e49509f1aaa70e635b6662ed9fffaf31165799.1728459624.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-09 14:40:52 +01:00
Binbin Zhou
de0fb25e37
ASoC: codecs: Add uda1342 codec driver
The UDA1342 is an NXP audio codec, support 2x Stereo audio ADC (4x PGA
mic inputs), stereo audio DAC, with basic audio processing.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/927e46b48ca84865a216ce08e7c53df59c2a8c0b.1728459624.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-09 14:40:51 +01:00
Binbin Zhou
de56743159
ASoC: dt-bindings: Add NXP uda1342 Codec
Add NXP uda1342 CODEC binding with DT schema format using json-schema.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/d75045f8051d6e7a2a711c86a52a7c0a43775d08.1728459624.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-09 14:40:50 +01:00
Binbin Zhou
b97391a604
ASoC: codecs: Add support for ES8323
Add a codec driver for the Everest ES8323. It supports two separate
audio outputs and two separate audio inputs.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/135b19b06d19f34af8a0419bd3782ce5b8779870.1728459624.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-09 14:40:49 +01:00