The instructions group is now generated by default so update the doc to
reflect this. Also explain the period/downsampling mechanism in more
detail.
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <Ben.Gainey@arm.com>
Cc: George Wort <George.Wort@arm.com>
Cc: Graham Woodward <Graham.Woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Williams <Michael.Williams@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we only display the warning when the instructions group is
requested. Instructions are on by default, and the period applies to all
sample types anyway so always check the options and show the warning.
Reword the messages to be more explicit about which flags the warnings
apply to.
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <Ben.Gainey@arm.com>
Cc: George Wort <George.Wort@arm.com>
Cc: Graham Woodward <Graham.Woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Williams <Michael.Williams@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The various sample types that are generated are based on the same SPE
sample, just placed into different sample type bins.
The same sample can be in multiple bins if it has flags set that cause
it to be.
Currently we're only applying the --itrace interval downsampling to the
instruction bin, which means that the sample would appear in one bin but
not another if it was skipped due to downsampling.
I don't thing anyone would want or expect this, so make this behave
consistently by applying the downsampling before generating any sample.
You might argue that the "instructions" interval type doesn't make sense
to apply to "memory" sample types because it would be skipping every n
memory samples, rather than every n instructions.
ut the downsampling was already not an instruction interval even for the
instruction samples. SPE has a hardware based sampling interval, and the
instruction interval was just a convenient way to specify further
downsampling.
This is hinted at in the warning message shown for intervals greater
than 1.
This makes SPE diverge from trace technologies like Intel PT and Arm
Coresight.
In those cases instruction samples can be reduced but all branches are
still emitted. This makes sense there, because branches form a complete
execution history, and asking to skip branches every n instructions
doesn't really make sense.
But for SPE, as mentioned above, downsampling the instruction samples
already wasn't consistent with trace technologies so we ended up with
some middle ground that had no benefit.
Now it's possible to reduce the volume of samples in all groups and
samples won't be missing from one group but present in another.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <Ben.Gainey@arm.com>
Cc: George Wort <George.Wort@arm.com>
Cc: Graham Woodward <Graham.Woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Williams <Michael.Williams@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instruction sample types are enabled in the default itrace options in
perf, but this never applied to SPE because the default nanoseconds
period isn't supported.
This meant that instructions ended up being opt-in by the user only when
they requested an instruction based period.
Change the default period type to instructions so that instruction
samples are generated by default. This can overridden by specifying any
--itrace option.
This solves a common complaint from users that the unfiltered SPE
samples appear to be missing, and only the samples that have memory
flags set appear in the various memory groups.
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <Ben.Gainey@arm.com>
Cc: George Wort <George.Wort@arm.com>
Cc: Graham Woodward <Graham.Woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Williams <Michael.Williams@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The i40e hardware has multiple hardware settings which define the Maximum
Frame Size (MFS) of the physical port. The firmware has an AdminQ command
(0x0603) to configure the MFS, but the i40e Linux driver never issues this
command.
In most cases this is no problem, as the NVM default value has the device
configured for its maximum value of 9728. Unfortunately, recent versions of
the iPXE intelxl driver now issue the 0x0603 Set Mac Config command,
modifying the MFS and reducing it from its default value of 9728.
This occurred as part of iPXE commit 6871a7de705b ("[intelxl] Use admin
queue to set port MAC address and maximum frame size"), a prerequisite
change for supporting the E800 series hardware in iPXE. Both the E700 and
E800 firmware support the AdminQ command, and the iPXE code shares much of
the logic between the two device drivers.
The ice E800 Linux driver already issues the 0x0603 Set Mac Config command
early during probe, and is thus unaffected by the iPXE change.
Since commit 3a2c6ced90 ("i40e: Add a check to see if MFS is set"), the
i40e driver does check the I40E_PRTGL_SAH register, but it only logs a
warning message if its value is below the 9728 default. This register also
only covers received packets and not transmitted packets. A warning can
inform system administrators, but does not correct the issue. No
interactions from userspace cause the driver to write to PRTGL_SAH or issue
the 0x0603 AdminQ command. Only a GLOBR reset will restore the value to its
default value. There is no obvious method to trigger a GLOBR reset from
user space.
To fix this, introduce the i40e_aq_set_mac_config() function, similar to
the one from the ice driver. Call this during early probe to ensure that
the device configuration matches driver expectation. Unlike E800, the E700
firmware also has a bit to control whether the MAC should append CRC data.
It is on by default, but setting a 0 to this bit would disable CRC. The
i40e implementation must set this bit to ensure CRC will be appended by the
MAC.
In addition to the AQ command, instead of just checking the I40E_PRTGL_SAH
register, update its value to the 9728 default and write it back. This
ensures that the hardware is in the expected state, regardless of whether
the iPXE (or any other early boot driver) has modified this state.
This is a better user experience, as we now fix the issues with larger MTU
instead of merely warning. It also aligns with the way the ice E800 series
driver works.
A final note: The Fixes tag provided here is not strictly accurate. The
issue occurs as a result of an external entity (the iPXE intelxl driver),
and this is not a regression specifically caused by the mentioned change.
However, I believe the original change to just warn about PRTGL_SAH being
too low was an insufficient fix.
Fixes: 3a2c6ced90 ("i40e: Add a check to see if MFS is set")
Link: 6871a7de70
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Pull MD changes from Yu Kuai:
"Redundant data is used to enhance data fault tolerance, and the storage
method for redundant data vary depending on the RAID levels. And it's
important to maintain the consistency of redundant data.
Bitmap is used to record which data blocks have been synchronized and
which ones need to be resynchronized or recovered. Each bit in the
bitmap represents a segment of data in the array. When a bit is set,
it indicates that the multiple redundant copies of that data segment
may not be consistent. Data synchronization can be performed based on
the bitmap after power failure or readding a disk. If there is no
bitmap, a full disk synchronization is required.
Due to known performance issues with md-bitmap and the unreasonable
implementations:
- self-managed IO submitting like filemap_write_page();
- global spin_lock
I have decided not to continue optimizing based on the current bitmap
implementation, this new bitmap is invented without locking from IO fast
path and can be used with fast disks.
Key features for the new bitmap:
- IO fastpath is lockless, if user issues lots of write IO to the same
bitmap bit in a short time, only the first write has additional
overhead to update bitmap bit, no additional overhead for the
following writes;
- support only resync or recover written data, means in the case
creating new array or replacing with a new disk, there is no need to
do a full disk resync/recovery;"
* tag 'md-6.18-20250909' of gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux: (24 commits)
md/md-llbitmap: introduce new lockless bitmap
md/md-bitmap: make method bitmap_ops->daemon_work optional
md: add a new recovery_flag MD_RECOVERY_LAZY_RECOVER
md/md-bitmap: add a new method blocks_synced() in bitmap_operations
md/md-bitmap: add a new method skip_sync_blocks() in bitmap_operations
md/md-bitmap: delay registration of bitmap_ops until creating bitmap
md/md-bitmap: add a new sysfs api bitmap_type
md: add a new mddev field 'bitmap_id'
md/md-bitmap: support discard for bitmap ops
md: factor out a helper raid_is_456()
md: add a new parameter 'offset' to md_super_write()
md/md-bitmap: introduce CONFIG_MD_BITMAP
md: check before referencing mddev->bitmap_ops
md/dm-raid: check before referencing mddev->bitmap_ops
md/raid5: check before referencing mddev->bitmap_ops
md/raid10: check before referencing mddev->bitmap_ops
md/raid1: check before referencing mddev->bitmap_ops
md/raid1: check bitmap before behind write
md/md-bitmap: handle the case bitmap is not enabled before end_sync()
md/md-bitmap: handle the case bitmap is not enabled before start_sync()
...
When the xe pm_notifier evicts for suspend / hibernate, there might be
racing tasks trying to re-validate again. This can lead to suspend taking
excessive time or get stuck in a live-lock. This behaviour becomes
much worse with the fix that actually makes re-validation bring back
bos to VRAM rather than letting them remain in TT.
Prevent that by having exec and the rebind worker waiting for a completion
that is set to block by the pm_notifier before suspend and is signaled
by the pm_notifier after resume / wakeup.
It's probably still possible to craft malicious applications that block
suspending. More work is pending to fix that.
v3:
- Avoid wait_for_completion() in the kernel worker since it could
potentially cause work item flushes from freezable processes to
wait forever. Instead terminate the rebind workers if needed and
re-launch at resume. (Matt Auld)
v4:
- Fix some bad naming and leftover debug printouts.
- Fix kerneldoc.
- Use drmm_mutex_init() for the xe->rebind_resume_lock (Matt Auld).
- Rework the interface of xe_vm_rebind_resume_worker (Matt Auld).
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4288
Fixes: c6a4d46ec1 ("drm/xe: evict user memory in PM notifier")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250904160715.2613-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit 599334572a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Its actions are opportunistic anyway and will be completed
on device suspend.
Marking as a fix to simplify backporting of the fix
that follows in the series.
v2:
- Keep the runtime pm reference over suspend / hibernate and
document why. (Matt Auld, Rodrigo Vivi):
Fixes: c6a4d46ec1 ("drm/xe: evict user memory in PM notifier")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250904160715.2613-3-thomas.hellstrom@linux.intel.com
(cherry picked from commit ebd546fdff)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
VRAM+TT bos that are evicted from VRAM to TT may remain in
TT also after a revalidation following eviction or suspend.
This manifests itself as applications becoming sluggish
after buffer objects get evicted or after a resume from
suspend or hibernation.
If the bo supports placement in both VRAM and TT, and
we are on DGFX, mark the TT placement as fallback. This means
that it is tried only after VRAM + eviction.
This flaw has probably been present since the xe module was
upstreamed but use a Fixes: commit below where backporting is
likely to be simple. For earlier versions we need to open-
code the fallback algorithm in the driver.
v2:
- Remove check for dgfx. (Matthew Auld)
- Update the xe_dma_buf kunit test for the new strategy (CI)
- Allow dma-buf to pin in current placement (CI)
- Make xe_bo_validate() for pinned bos a NOP.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5995
Fixes: a78a8da51b ("drm/ttm: replace busy placement with flags v6")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v6.9+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250904160715.2613-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit cb3d7b3b46)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is a user controlled configfs attribute, we should not
modify that outside the configfs attr.store() implementation.
Fixes: bc417e54e2 ("drm/xe: Enable configfs support for survivability mode")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250904103521.7130-1-michal.wajdeczko@intel.com
(cherry picked from commit 079a5c83db)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We currently report an L3 bank mask as part of the GT topology on both
GTs (primary and media) because a copy of the L3 bank fuse register
exists on both GTs (e.g., $gsi_offset + 0x9130 on Xe3). After recent
discussions it's come to light that the only known userspace software
that uses this part of the uapi (the compute UMD and Mesa) only uses the
value reported for the primary GT; the value reported for the media GT
is ignored by both projects, and the media UMDs don't have any use for
L3 information today. Since we always strive to have our uapi match the
specific needs of userspace and not include additional unused baggage,
let's officially drop L3 bank reporting on the media GT going forward
and only keep it around for the primary GT where it actually gets used.
This change will only apply to future platforms (Xe3 and later); even
though it would probably be safe to remove it from Xe1/Xe2 as well, we
don't want to take any chances with changing existing ABI.
Note that we'd already disabled reading/reporting of the L3 bank for the
media GT on PTL in commit 9ab440a9d0 ("drm/xe/ptl: L3bank mask is not
available on the media GT") because it was discovered that the copy of
the fuse registers on the media GT were just reporting a bogus ~0 value
rather than an accurate mask. So this is just extending that PTL
behavior forward to WCL and other future platforms. Note that we're
also free to reinstate this part of the uapi in the future if/when some
new userspace consumer emerges that _does_ have a use for media-specific
L3 bank masks.
Cc: Fei Yang <fei.yang@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20250905215614.796247-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Update the GPU OPP table with new opp levels along with the
speedbin configurations.
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Link: https://lore.kernel.org/r/20250701-x1e-speedbin-b4-v2-3-a8a7e06d39fb@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If request_irq() in i40e_vsi_request_irq_msix() fails in an iteration
later than the first, the error path wants to free the IRQs requested
so far. However, it uses the wrong dev_id argument for free_irq(), so
it does not free the IRQs correctly and instead triggers the warning:
Trying to free already-free IRQ 173
WARNING: CPU: 25 PID: 1091 at kernel/irq/manage.c:1829 __free_irq+0x192/0x2c0
Modules linked in: i40e(+) [...]
CPU: 25 UID: 0 PID: 1091 Comm: NetworkManager Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy)
Hardware name: [...]
RIP: 0010:__free_irq+0x192/0x2c0
[...]
Call Trace:
<TASK>
free_irq+0x32/0x70
i40e_vsi_request_irq_msix.cold+0x63/0x8b [i40e]
i40e_vsi_request_irq+0x79/0x80 [i40e]
i40e_vsi_open+0x21f/0x2f0 [i40e]
i40e_open+0x63/0x130 [i40e]
__dev_open+0xfc/0x210
__dev_change_flags+0x1fc/0x240
netif_change_flags+0x27/0x70
do_setlink.isra.0+0x341/0xc70
rtnl_newlink+0x468/0x860
rtnetlink_rcv_msg+0x375/0x450
netlink_rcv_skb+0x5c/0x110
netlink_unicast+0x288/0x3c0
netlink_sendmsg+0x20d/0x430
____sys_sendmsg+0x3a2/0x3d0
___sys_sendmsg+0x99/0xe0
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x82/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
</TASK>
---[ end trace 0000000000000000 ]---
Use the same dev_id for free_irq() as for request_irq().
I tested this with inserting code to fail intentionally.
Fixes: 493fb30011 ("i40e: Move q_vectors from pointer to array to array of pointers")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The igb driver incorrectly skips the link test when the network
interface is admin down (if_running == false), causing the test to
always report PASS regardless of the actual physical link state.
This behavior is inconsistent with other drivers (e.g. i40e, ice, ixgbe,
etc.) which correctly test the physical link state regardless of admin
state.
Remove the if_running check to ensure link test always reflects the
physical link state.
Fixes: 8d420a1b3e ("igb: correct link test not being run when link is down")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The igb driver currently causes a NULL pointer dereference when executing
the ethtool loopback test. This occurs because there is no associated
q_vector for the test ring when it is set up, as interrupts are typically
not added to the test rings.
Since commit 5ef44b3cb4 removed the napi_id assignment in
__xdp_rxq_info_reg(), there is no longer a need to pass a napi_id to it.
Therefore, simply use 0 as the last parameter.
Fixes: 2c6196013f ("igb: Add AF_XDP zero-copy Rx support")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Tianyu Xu <tianyxu@cisco.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We can now safely provide a block device when extracting user pages for
driver and user passthrough commands. Set the bdev so the caller doesn't
have to do that later. This has an additional benefit of being able to
extract P2P pages in the passthrough path.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only need to consider data and metadata dma mapping types separately.
The request and bio integrity payload have enough flag bits to
internally track the mapping type for each. Use these so the caller
doesn't need to track them, and provide separete request and integrity
helpers to the common code. This will make it easier to scale new
mappings, like the proposed MMIO attribute, without burdening the caller
to track such things.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the extraction flags to allow p2p pages for the metadata buffer if
the block device allows it. Similar to data payloads, ensure the bio
does not use merging if we see a p2p page.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current mem limit check leaks some GTT memory (reserved_for_pt
reserved_for_ras + adev->vram_pin_size) for small APUs.
Since carveout VRAM is tunable on APUs, there are three case
regarding the carveout VRAM size relative to GTT:
1. 0 < carveout < gtt
apu_prefer_gtt = true, is_app_apu = false
2. carveout > gtt / 2
apu_prefer_gtt = false, is_app_apu = false
3. 0 = carveout
apu_prefer_gtt = true, is_app_apu = true
It doesn't make sense to check below limitation in case 1
(default case, small carveout) because the values in the below
expression are mixed with carveout and gtt.
adev->kfd.vram_used[xcp_id] + vram_needed >
vram_size - reserved_for_pt - reserved_for_ras -
atomic64_read(&adev->vram_pin_size)
gtt: kfd.vram_used, vram_needed, vram_size
carveout: reserved_for_pt, reserved_for_ras, adev->vram_pin_size
In case 1, vram allocation will go to gtt domain, skip vram check
since ttm_mem_limit check already cover this allocation.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fa7c99f04f)
When creating p2p links, KFD needs to check XGMI link
with two conditions, hive_id and is_sharing_enabled,
but it is missing to check is_sharing_enabled, so add
it to fix the error.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 36cc7d1317)
Fixes a bug where unbinding of the GPU would leave the oem i2c adapter
registered resulting in a null pointer dereference when applications try
to access the invalid device.
Fixes: 3d5470c973 ("drm/amd/display/dm: add support for OEM i2c bus")
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 89923fb7ea)
Cc: stable@vger.kernel.org
No more callers.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're checking length and addresses against the same alignment value, so
use the more simple iterator check.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No more callers.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block layer checks all the segments for validity later, so no need
for an early check. Just reduce it to a simple position and total length
check, and defer the more invasive segment checks to the block layer.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block layer checks all the segments for validity later, so no need
for an early check. Just reduce it to a simple position and total length
check, and defer the more invasive segment checks to the block layer.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of ensuring each vector is block size aligned while constructing
the bio, just ensure the entire size is aligned after it's built. This
makes getting bio pages more flexible to accepting device valid io
vectors that would otherwise get rejected by alignment checks.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block layer tries to align bio vectors to the block device's logical
block size. Some cases don't have a block device, or we may need to
align to something larger, which we can't derive it from the queue
limits. Have the caller specify what they want, or allow any length
alignment if nothing was specified. Since the most common use case
relies on the block device's limits, a helper function is provided.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're already iterating every segment, so check these for a valid IO
lengths at the same time. Individual segment lengths will not be checked
on passthrough commands. The read/write command segments must be sized
to the dma alignment.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[Why]
dm_prepare_suspend() was added in commit 50e0bae34f
("drm/amd/display: Add and use new dm_prepare_suspend() callback")
to allow display to turn off earlier in the suspend sequence.
This caused a regression that HDMI audio sometimes didn't work
properly after resume unless audio was playing during suspend.
[How]
Drop dm_prepare_suspend() callback. All code in it will still run
during dm_suspend(). Also drop unnecessary dm_complete() callback.
dm_complete() was used for failed prepare and also for any case
of successful resume. The code in it already runs in dm_resume().
This change will introduce more time that the display is turned on
during suspend sequence. The compositor can turn it off sooner if
desired.
Cc: Harry Wentland <harry.wentland@amd.com>
Reported-by: Przemysław Kopa <prz.kopa@gmail.com>
Closes: https://lore.kernel.org/amd-gfx/1cea0d56-7739-4ad9-bf8e-c9330faea2bb@kernel.org/T/#m383d9c08397043a271b36c32b64bb80e524e4b0f
Reported-by: Kalvin <hikaph+oss@gmail.com>
Closes: https://github.com/alsa-project/alsa-lib/issues/465
Closes: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4809
Fixes: 50e0bae34f ("drm/amd/display: Add and use new dm_prepare_suspend() callback")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2fd653b9bb)
Cc: stable@vger.kernel.org
[why]
The current PG & RCG programming in driver has some gaps and incorrect
sequences.
[how]
Added delays after ungating clocks to allow ramp up, increased polling
to allow more time for power up, and removed the incorrect sequences.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1bde5584e2)
Cc: stable@vger.kernel.org
The loop in bench_sockmap_prog_destroy() has two issues:
1. Using 'sizeof(ctx.fds)' as the loop bound results in the number of
bytes, not the number of file descriptors, causing the loop to iterate
far more times than intended.
2. The condition 'ctx.fds[0] > 0' incorrectly checks only the first fd for
all iterations, potentially leaving file descriptors unclosed. Change
it to 'ctx.fds[i] > 0' to check each fd properly.
These fixes ensure correct cleanup of all file descriptors when the
benchmark exits.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250909124721.191555-1-jiayuan.chen@linux.dev
Closes: https://lore.kernel.org/bpf/aLqfWuRR9R_KTe5e@stanley.mountain/
Tariq Toukan says:
====================
mlx5-next updates 2025-09-09
The following pull-request contains a common mlx5 update.
* tag 'mlx5-rs-fec-ifc' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add RS FEC histogram infrastructure
====================
Link: https://patch.msgid.link/1757413460-539097-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In active_engines, if intel_context_create fails, we need to go
backwards through all the created contexts to free/put them. However,
the way this is currently performed skips the first created context, as
if count == 1, then --count returns 0 and exits the while-loop
prematurely without performing the intel_context_put on context 0.
Fix this by post-decrementing count in the while-loop, rather than
pre-decrementing it. This change makes the prior guard against count
underflowing unnecessary, as the while-loop exits when count == 0.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Krzysztof Karas <krzysztof.karas@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250904193041.12888-2-jonathan.cavitt@intel.com
The PMK8550 RTC is always enabled in its DTSI file since
commit a791fc1996 ("arm64: dts: qcom: pmk8550: always enable RTC PMIC
device"), so drop redundant status=okay in SM8650 boards.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250908085331.56478-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add new device support for the Samsung Galaxy S20 phone
What works (common dtsi):
- SimpleFB
- Pstore/ramoops
- GPIO keys
- UFS
- USB
Signed-off-by: Eric Gonçalves <ghatto404@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250905190931.27481-4-ghatto404@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add binding for the Samsung Galaxy S20 board, codenamed X1Q,
which is based on the Qualcomm Snapdragon 865 SoC.
Signed-off-by: Eric Gonçalves <ghatto404@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250905190931.27481-3-ghatto404@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Move common parts of the device tree to a separate dtsi in preparation for
adding other Samsung devices from the S20, Tab S7 or Note 20 families,
creating sm8250-samsung-common.dtsi. Also add support for UFS, USB and
GPIO keys.
Signed-off-by: Eric Gonçalves <ghatto404@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250905190931.27481-2-ghatto404@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In addition of checking if we are running on the BATTLEMAGE,
we should also check for not being a VF driver, as VFs can't
access necessary registers, and doing so leads to:
| .. [drm] GT0: VF is trying to read an inaccessible register 0x35b004+0x0
| RIP: 0010:xe_gt_sriov_vf_read32+0x5e2/0x8a0 [xe]
| Call Trace:
| xe_mmio_read32+0x110/0x280 [xe]
| read_residency_counter+0x42/0xd0 [xe]
| dgfx_pkg_residencies_show+0x115/0x190 [xe]
| .. [drm] Package G2 counter failed to read, ret -19
or
| .. [drm] GT0: VF is trying to read an inaccessible register 0x35b004+0x0
| RIP: 0010:xe_gt_sriov_vf_read32+0x5e2/0x8a0 [xe]
| Call Trace:
| xe_mmio_read32+0x110/0x280 [xe]
| read_residency_counter+0x42/0xd0 [xe]
| dgfx_pcie_link_residencies_show+0xe7/0x160 [xe]
| .. [drm] PCIE LINK L0 RESIDENCY counter failed to read, ret -19
Similarly, there is no point to expose inject_csc_hw_error on VFs,
as HW errors support is already disabled for VFs.
Bspec: 53221
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Soham Purkait <soham.purkait@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250905173625.8398-1-michal.wajdeczko@intel.com
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch adds a new WQ_PERCPU flag to explicitly request the use of
the per-CPU behavior. Both flags coexist for one release cycle to allow
callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
queue_work() / queue_delayed_work() / mod_delayed_work() will now use the
new unbound wq: whether the user still use the old wq a warn will be
printed along with a wq redirect to the new one.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
queue_work() / queue_delayed_work() / mod_delayed_work() will now use the
new unbound wq: whether the user still use the old wq a warn will be
printed along with a wq redirect to the new one.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace kmalloc() followed by copy_from_user() with memdup_user() to
improve and simplify raw_cmd_copyin().
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the sound card node with tested playback over max98357a
I2S speakers amplifier and I2S mic.
Introduce HS (High-Speed) MI2S pin control support.
The I2S max98357a speaker amplifier is connected via HS0 and I2S
microphones utilize the HS2 interface.
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250822131902.1848802-3-mohammad.rafi.shaik@oss.qualcomm.com
[bjorn: Sorted nodes]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the Samsung ATNA40YK20 eDP panel to the device tree for the
Snapdragon T14s OLED model.
Signed-off-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250814-wip-obbardc-qcom-t14s-oled-panel-v7-1-89966ae886a3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
