Move the range_overflows() and range_end_overflows() along with the _t
variants over from drm/i915 and drm/buddy to overflow.h.
Cc: Kees Cook <kees@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-hardening@vger.kernel.org
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250829174601.2163064-3-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Rename range_overflows_end() to range_end_overflows(), along with the _t
variant.
It's all rather subjective, but I think range_end_overflows() reads
better.
Cc: Kees Cook <kees@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-hardening@vger.kernel.org
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250829174601.2163064-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The SME ABI documentation contains an inaccurate description of the
architectural streaming mode entry/exit behaviour, just remove it since
this is better documented by the architecture or with the rest of the
documentation for the specific software interfaces concerned.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
This mirrors the egpio support added to sc7280/sm8450/etc. This change
is necessary for GPIOs 146 - 179 (34 GPIOs) to be used as normal GPIOs.
Signed-off-by: Sean Parker <sean.parker@viasat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This generic pin config property is confusingly named so let's
rename it to make things clearer.
There are already drivers in the tree that use PIN_CONFIG_OUTPUT
to *read* the value of an output driven pin, which is a big
semantic confusion for the head: are we then reading the
setting of the output or the actual value/level that is put
out on the pin?
We already have PIN_CONFIG_OUTPUT_ENABLE that turns on driver
buffers for output, so this can by logical conclusion only
drive the voltage level if it should be any different.
But if we read the pin, are we then reading the *setting* of
the output value or the *actual* value we can see on the
line?
If the pin has not first been set into output mode with
PIN_CONFIG_OUTPUT_ENABLE, but is instead in some input mode
or tristate, what will reading this property actually
return?
Reading the current users reading this property it is clear
that what we read is the logical level of the pin as 0 or 1
depending on if it is low or high.
Rename it to PIN_CONFIG_LEVEL so it is crystal clear that
we set or read the voltage level of the pin and nothing else.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This kfree() was accidentally left over when we converted to devm_
and it would lead to a double free. Delete it.
Fixes: 995bc9f4826e ("pinctrl: keembay: release allocated memory in detach path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The datasheet lists this signal as PRI_TDI, not PRI_DTI.
Fix the pin name to match the documentation and JTAG naming
convention (TDI = Test Data In).
Signed-off-by: Hendrik Hamerlinck <hendrik.hamerlinck@hammernet.be>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Smatch reported the following warning in eic7700_pinctrl_probe():
drivers/pinctrl/pinctrl-eic7700.c:638 eic7700_pinctrl_probe()
warn: passing zero to 'PTR_ERR'
The root cause is that devm_regulator_get() may return NULL when
CONFIG_REGULATOR is disabled. In such case, IS_ERR_OR_NULL() triggers
PTR_ERR(NULL) which evaluates to 0, leading to passing a success code
as an error.
However, this driver cannot work without a regulator. To fix this:
- Change the check from IS_ERR_OR_NULL() to IS_ERR()
- Update Kconfig to explicitly select REGULATOR and
REGULATOR_FIXED_VOLTAGE, ensuring that the regulator framework is
always available.
This resolves the Smatch warning and enforces the correct dependency.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 5b797bcc00 ("pinctrl: eswin: Add EIC7700 pinctrl driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-gpio/aKRGiZ-fai0bv0tG@stanley.mountain/
Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This driver provide pin muxing and configuration functionality
for BCM2712 SoC used by RPi5. According to [1] this chip is an
instance of the one used in Broadcom STB product line.
[1] https://lore.kernel.org/lkml/f6601f73-cb22-4ba3-88c5-241be8421fc3@broadcom.com/
Cc: Jonathan Bell <jonathan@raspberrypi.com>
Cc: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
[linusw: Enable also for ARCH_BCM2835]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The STB pin controller represents a family whose silicon instances
are found e.g. on BCM2712 SoC.
In particular, on RaspberryPi 5, there are two separate instantiations
of the same IP block which differ in the number of pins that are
associated and the pinmux functions for each of those pins. The
-aon- variant stands for 'Always On'.
Depending on the revision of the BCM2712 (CO or D0), the pin
controller instance has slight differences in the register layout.
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
[linusw: Dropped extranous label and fixed whitespace]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The strict flag in struct pinmux_ops disallows the usage of the same pin
as a GPIO and for another function. Without it, a rouge user-space
process with enough privileges (or even a buggy driver) can request a
used pin as GPIO and drive it, potentially confusing devices or even
crashing the system. Set it globally for all pinctrl-msm users.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Allow pins muxed to the "gpio" or "egpio" function to be requested as
GPIOs even if pinmux_ops say the controller should be strict.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add a helper macro that wraps PINCTRL_GPIO_PINFUNCTION() for pinctrl-msm
pin functions and assign the .function_is_gpio() callback in pinmux_ops.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The name of the pin function has no real meaning to pinctrl core and is
there only for human readability of device properties. Some pins are
muxed as GPIOs but for "strict" pinmuxers it's impossible to request
them as GPIOs if they're bound to a devide - even if their function name
explicitly says "gpio". Add a new field to struct pinfunction that
allows to pass additional flags to pinctrl core. While we could go with
a boolean "is_gpio" field, a flags field is more future-proof.
If the PINFUNCTION_FLAG_GPIO is set for a given function, the pin muxed
to it can be requested as GPIO even on strict pin controllers. Add a new
callback to struct pinmux_ops - function_is_gpio() - that allows pinmux
core to inspect a function and see if it's a GPIO one. Provide a generic
implementation of this callback.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With the pinmux core no longer duplicating memory used to store the
struct pinfunction objects in .rodata, we can now use the existing
infrastructure for storing and looking up pin functions in qualcomm
drivers. Remove hand-crafted callbacks.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We currently duplicate the entire struct pinfunction object in
pinmux_generic_add_pinfunction(). While this is inevitable when the
arguments come in split through pinmux_generic_add_function(), users of
pinmux_generic_add_pinfunction() will typically pass addresses of
structures in .rodata, meaning we can try to avoid the duplication with
the help from kmemdup_const(). To that end: don't wrap the entire struct
pinfunction in struct function_desc but rather just store the address.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With all users of struct function_desc limited to only accessing it using
the dedicated function and never modifying it, we can now constify the
return value of pinmux_generic_get_function() treewide.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Cadence PCIe Controller integrated in the TI K3 SoCs supports both
Root-Complex and Endpoint modes of operation. The Glue Layer allows
"strapping" the Mode of operation of the Controller, the Link Speed
and the Link Width. This is enabled by programming the "PCIEn_CTRL"
register (n corresponds to the PCIe instance) within the CTRL_MMR
memory-mapped register space. The "reset-values" of the registers are
also different depending on the mode of operation.
Since the PCIe Controller latches onto the "reset-values" immediately
after being powered on, if the Glue Layer configuration is not done while
the PCIe Controller is off, it will result in the PCIe Controller latching
onto the wrong "reset-values". In practice, this will show up as a wrong
representation of the PCIe Controller's capability structures in the PCIe
Configuration Space. Some such capabilities which are supported by the PCIe
Controller in the Root-Complex mode but are incorrectly latched onto as
being unsupported are:
- Link Bandwidth Notification
- Alternate Routing ID (ARI) Forwarding Support
- Next capability offset within Advanced Error Reporting (AER) capability
Fix this by powering off the PCIe Controller before programming the "strap"
settings and powering it on after that. The runtime PM APIs namely
pm_runtime_put_sync() and pm_runtime_get_sync() will decrement and
increment the usage counter respectively, causing GENPD to power off and
power on the PCIe Controller.
Fixes: f3e25911a4 ("PCI: j721e: Add TI J721E PCIe driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250908120828.1471776-1-s-vadapalli@ti.com
struct function_desc is a wrapper around struct pinfunction with an
additional void *data pointer. We're working towards reducing the usage
of struct function_desc in pinctrl drivers - they should only be created
by pinmux core and accessed by drivers using
pinmux_generic_get_function(). This driver uses the data pointer so in
order to stop using struct function_desc, we need to provide an
alternative that also wraps the mux mode which is passed to pinctrl core
as user data.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Unlike all the other allocations in this driver, the memory for storing
the pin function descriptions allocated with kcalloc() and later resized
with krealloc() is never freed. Use devres like elsewhere to handle
that. While at it - replace krealloc() with more suitable
devm_krealloc_array().
Note: the logic in this module is pretty convoluted and could probably
use some revisiting, we should probably be able to calculate the exact
amount of memory needed in advance or even skip the allocation
altogether and just add each function to the radix tree separately.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The radix tree containing pin function descriptors should not be
accessed directly by drivers. There are dedicated functions for it. I
suppose this driver does it so that the memory containing the function
description is not duplicated but we're going to address that shortly so
convert it to using generic pinctrl APIs.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct function_desc is a wrapper around struct pinfunction with an
additional void *data pointer. This driver doesn't use the data pointer.
We're also working towards reducing the usage of struct function_desc in
pinctrl drivers - they should only be created by pinmux core and
accessed by drivers using pinmux_generic_get_function(). Replace the
struct function_desc objects in this driver with smaller struct
pinfunction instances.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We have a dedicated initializer macro for defining pin functions for
mediatek drivers so use it here.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct function_desc is a wrapper around struct pinfunction with an
additional void *data pointer. This driver doesn't use the data pointer.
We're also working towards reducing the usage of struct function_desc in
pinctrl drivers - they should only be created by pinmux core and
accessed by drivers using pinmux_generic_get_function(). Replace the
struct function_desc objects in this driver with smaller struct
pinfunction instances.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct function_desc is a wrapper around struct pinfunction with an
additional void *data pointer. This driver doesn't use the data pointer.
We're also working towards reducing the usage of struct function_desc in
pinctrl drivers - they should only be created by pinmux core and
accessed by drivers using pinmux_generic_get_function(). Replace the
struct function_desc objects in this driver with smaller struct
pinfunction instances.
Acked-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Provide a function similar to devm_strdup_const() but for copying blocks
of memory that are likely to be placed in .rodata.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
While the API contract in docs doesn't specify it explicitly, the
generic implementation of the get_function_name() callback from struct
pinmux_ops - pinmux_generic_get_function_name() - can fail and return
NULL. This is already checked in pinmux_check_ops() so add a similar
check in pinmux_func_name_to_selector() instead of passing the returned
pointer right down to strcmp() where the NULL can get dereferenced. This
is normal operation when adding new pinfunctions.
Cc: stable@vger.kernel.org
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Change the 'ret' variable in ma35_pinctrl_parse_functions() from u32 to
int, as it needs to store either negative error codes or zero returned
by ma35_pinctrl_parse_groups().
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In armada_37xx_gpio_direction_output(), the 'ret' variable might store
the negative error codes returned by regmap_update_bits(), and in
armada_37xx_edge_both_irq_swap_pol(), the 'ret' variable directly
stores -1, so the type of the 'ret' variable needs to be changed to
int in both cases.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
All types in `bindings` implement `Zeroable` if they can, so use
`pin_init::zeroed` instead of relying on `unsafe` code.
If this ends up not compiling in the future, something in bindgen or on
the C side changed and is most likely incorrect.
Signed-off-by: Benno Lossin <lossin@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Using the `--with-derive-custom-{struct,union}` option of bindgen, add
`#[derive(MaybeZeroable)]` to every struct & union. This makes those
types implement `Zeroable` if all their fields implement it.
Sadly bindgen doesn't add custom derives to the `__BindgenBitfieldUnit`
struct. So manually implement `Zeroable` for that.
Signed-off-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
[ Formatted comment. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The intel_panic_finish() function really needs the struct intel_panic
pointer, not struct intel_framebuffer. Make it so.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/3fdbcbe17e0e90c4a590f2a2486a9ec79a90cf62.1756835342.git.jani.nikula@intel.com
The struct intel_framebuffer allocation naturally belongs in intel_fb.c,
not hidden inside panic implementation. Separate the panic
allocation. Drop the unnecessary struct i915_framebuffer and struct
xe_framebuffer types.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/d29f63e0118d002fc8edd368caea7e8185418e17.1756835342.git.jani.nikula@intel.com
Prepare for better shared interfaces between panic implementations. The
struct intel_panic remains an opaque data type, with unique
implementations in i915 and xe.
This allows us to change the panic data pointer from void * to struct
intel_panic *, helping type safety.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/884ffc80c8b5fef1b92956e644a4e559560cc2ba.1756835342.git.jani.nikula@intel.com
Add a panic data pointer member in struct intel_framebuffer in
preparation for breaking the artificial subclassing between
intel_framebuffer and panic structures.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/41f42e1de8545409274d54854aa12e0fb390e394.1756835342.git.jani.nikula@intel.com
Rename the intel_bo_panic_*() functions according to the functionality,
dropping the misleading intel_bo reference.
Keep intel_bo_alloc_framebuffer() for now; it'll be refactored later.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/a3be8f8b5e7dd208027a1131e89452d9a214054f.1756835342.git.jani.nikula@intel.com
intel_bo.[ch] is not the appropriate location for the panic
functionality. Split out intel_panic.[ch] and xe_panic.c in i915 and
xe. Keep the function names for now.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/d98b831a011a028ffd33ce99b0ba62be061ee235.1756835342.git.jani.nikula@intel.com
WA:22010751166 does not apply past display version 12. Or, in
other words, the FBC restriction where FBC is disabled for
non-modulo 4 plane sizes (including plane size + yoffset) is fixed
from display version 13 and onwards. Relax the restriction for the same.
v4: Dropped redundant commit message
v3: Update comments for clarity (Jonathan Cavitt)
v2: Update the macro for display version check (Vinod)
Suggested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250904095338.300813-2-uma.shankar@intel.com
The MISC protocol can provide System Manager (SM) configuration
information, including platform identifiers and board-specific
attributes. Add support to retrieve this information during protocol
initialization.
If the firmware does not implement the CFG_INFO command, handle
-EOPNOTSUPP gracefully and continue without failing init.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250904-sm-misc-api-v1-v4-3-0bf10eaabdf1@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
MISC protocol can report System Manager (SM) build information (commit,
build date/time, etc.). Discover those information at the init time.
If the firmware doesn't support it, ignore -EOPNOTSUPP.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250904-sm-misc-api-v1-v4-2-0bf10eaabdf1@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The CIX SKY1 SoC supports the integration of 8 I2C bus controllers and
2 I3C bus controllers.
Signed-off-by: Hongliang Yang <hongliang.yang@cixtech.com>
Signed-off-by: Jun Guo <jun.guo@cixtech.com>
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
For ternary operators in the form of "a ? false : true", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://lore.kernel.org/r/20250904112644.350512-1-liaoyuanhong@vivo.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
System Manager Firmware supports getting board information, add
documentation for this MISC_BOARD_INFO command.
Also extends the SYSLOG response to include NOT_SUPPORTED.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250904-sm-misc-api-v1-v4-1-0bf10eaabdf1@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The encoder name deduction has become a bit cumbersome within
intel_ddi_init(). Split it out to a separate function to declutter
intel_ddi_init(), even if that means having to use a temp seq buffer for
the name.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250903101050.3671305-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The dev_err_probe() doesn't do anything when error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just
return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
[mani: reworded the subject]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Use devm_mutex_init() instead of hand-writing it.
This saves some LoC, improves readability and saves some space in the
generated .o file.
Before:
======
text data bss dec hex filename
7607 2616 64 10287 282f drivers/platform/x86/quickstart.o
After:
=====
text data bss dec hex filename
7301 2544 64 9909 26b5 drivers/platform/x86/quickstart.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/530b930c981c436c172c0308b348d4ae4ef72800.1757251867.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
