Add support for DRM (Dynamic Range and Mastering) InfoFrames.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Remove unused fexible-array member and avoid 14 of the following type of
warnings:
drivers/net/wireless/intel/iwlwifi/mei/sap.h:318:28: warning: structure containing a flexible array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/aK6-usANI1UPtFVo@kspp
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
The header file "fw/img.h" is already included on line 9. Remove the
redundant include.
Fixes: 2594e4d9e1 ("wifi: iwlwifi: prepare for reading SAR tables from UEFI")
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://patch.msgid.link/20250819121201.608770-2-liaoyuanhong@vivo.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Now that the Curve25519 library has been disentangled from CRYPTO,
adding CRYPTO_SELFTESTS as a default value of
CRYPTO_LIB_CURVE25519_KUNIT_TEST no longer causes a recursive kconfig
dependency. Do this, which makes this option consistent with the other
crypto KUnit test options in the same file.
Link: https://lore.kernel.org/r/20250906213523.84915-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reorganize the Curve25519 library code:
- Build a single libcurve25519 module, instead of up to three modules:
libcurve25519, libcurve25519-generic, and an arch-specific module.
- Move the arch-specific Curve25519 code from arch/$(SRCARCH)/crypto/ to
lib/crypto/$(SRCARCH)/. Centralize the build rules into
lib/crypto/Makefile and lib/crypto/Kconfig.
- Include the arch-specific code directly in lib/crypto/curve25519.c via
a header, rather than using a separate .c file.
- Eliminate the entanglement with CRYPTO. CRYPTO_LIB_CURVE25519 no
longer selects CRYPTO, and the arch-specific Curve25519 code no longer
depends on CRYPTO.
This brings Curve25519 in line with the latest conventions for
lib/crypto/, used by other algorithms. The exception is that I kept the
generic code in separate translation units for now. (Some of the
function names collide between the x86 and generic Curve25519 code. And
the Curve25519 functions are very long anyway, so inlining doesn't
matter as much for Curve25519 as it does for some other algorithms.)
Link: https://lore.kernel.org/r/20250906213523.84915-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Move the Curve25519 test from an ad-hoc self-test to a KUnit test.
Generally keep the same test logic for now, just translated to KUnit.
There's one exception, which is that I dropped the incomplete test of
curve25519_generic(). The approach I'm taking to cover the different
implementations with the KUnit tests is to just rely on booting kernels
in QEMU with different '-cpu' options, rather than try to make the tests
(incompletely) test multiple implementations on one CPU. This way, both
the test and the library API are simpler.
This commit makes the file lib/crypto/curve25519.c no longer needed, as
its only purpose was to call the self-test. However, keep it for now,
since a later commit will add code to it again.
Temporarily omit the default value of CRYPTO_SELFTESTS that the other
lib/crypto/ KUnit tests have. It would cause a recursive kconfig
dependency, since the Curve25519 code is still entangled with CRYPTO. A
later commit will fix that.
Link: https://lore.kernel.org/r/20250906213523.84915-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Fix the checkpatch warning:
CHECK: Alignment should match open parenthesis
Fixes: 0cb172a491 ("power: supply: cw2015: Use device managed API to simplify the code")
Signed-off-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The dev_err_probe() doesn't do anything when error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just
return the value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Curve25519 has both a library API and a crypto_kpp API. However, the
crypto_kpp API for Curve25519 had no users outside crypto/testmgr.c.
I.e., no non-test code ever passed "curve25519" to crypto_alloc_kpp().
Remove this unused code. We'll instead focus on the Curve25519 library
API (<crypto/curve25519.h>), which is a simpler and easier-to-use API
and is the API that is actually being used.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Link: https://lore.kernel.org/r/20250906213523.84915-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Curve25519 is used only via the library API, not the crypto_kpp API. In
preparation for removing the unused crypto_kpp API for Curve25519,
remove the tests for the "curve25519" kpp from crypto/testmgr.c.
Note that these tests just duplicated lib/crypto/curve25519-selftest.c,
which uses the same list of test vectors. So they didn't really provide
any additional value.
Link: https://lore.kernel.org/r/20250906213523.84915-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Curve25519 is used only via the library API, not the crypto_kpp API. In
preparation for removing the unused crypto_kpp API for Curve25519,
remove the unused "curve25519-x86" kpp algorithm.
Note that the underlying x86_64 optimized Curve25519 code remains fully
supported and accessible via the library API.
It's also worth noting that even if the kpp support for Curve25519 comes
back later, there is no need for arch-specific kpp glue code like this,
as a single kpp algorithm that wraps the library API is sufficient.
Link: https://lore.kernel.org/r/20250906213523.84915-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Curve25519 is used only via the library API, not the crypto_kpp API. In
preparation for removing the unused crypto_kpp API for Curve25519,
remove the unused "curve25519-ppc64le" kpp algorithm.
Note that the underlying PowerPC optimized Curve25519 code remains fully
supported and accessible via the library API.
It's also worth noting that even if the kpp support for Curve25519 comes
back later, there is no need for arch-specific kpp glue code like this,
as a single kpp algorithm that wraps the library API is sufficient.
Link: https://lore.kernel.org/r/20250906213523.84915-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Curve25519 is used only via the library API, not the crypto_kpp API. In
preparation for removing the unused crypto_kpp API for Curve25519,
remove the unused "curve25519-neon" kpp algorithm.
Note that the underlying NEON optimized Curve25519 code remains fully
supported and accessible via the library API.
It's also worth noting that even if the kpp support for Curve25519 comes
back later, there is no need for arch-specific kpp glue code like this,
as a single kpp algorithm that wraps the library API is sufficient.
Link: https://lore.kernel.org/r/20250906213523.84915-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Curve25519 is used only via the library API, not the crypto_kpp API. In
preparation for removing the unused crypto_kpp API for Curve25519,
remove the unused "hpre-curve25519" kpp algorithm.
Cc: Longfang Liu <liulongfang@huawei.com>
Cc: Zhiqi Song <songzhiqi1@huawei.com>
Link: https://lore.kernel.org/r/20250906213523.84915-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Use max() to reduce the code in cw_battery_get_property() and improve
its readability.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Since there's the existing ADC function, add properties 'VOLTAGE_NOW'
and 'CURRENT_NOW' to report the current VBUS and IBUS value, respectively.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The ASUS S15 xElite model report the Li-ion battery with an OOI, hence this
update the detection and return the appropriate type.
Signed-off-by: Christopher Ruehl <chris.ruehl@gtsys.com.hk>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Don't populate the read-only array fsm_state on the stack at run time,
instead make it static const, this reduces the object code size as
the data is placed on the data segment and this removes the need to
have code to set the array up on each call.
Note that making the size of the strings to a more optimal 11 bytes long
does not seem to reduce the overall size. Making the array an array of
pointers to the strings increases the code size due to the dereferencing
overhead.
Simplify the array access with &fsm_state[info->state][0] with the simpler
expression fsm_state[info->state] to clean up the code.
Original:
text data bss dec hex filename
22884 8272 64 31220 79f4 drivers/power/supply/88pm860x_charger.o
Patched:
text data bss dec hex filename
22695 8368 64 31127 7997 drivers/power/supply/88pm860x_charger.o
Difference:
text data bss dec
-189 +96 0 -93
Reduction of 93 bytes total.
gcc version 14.2.0 (x86-64)
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When `devm_add_action_or_reset()` fails, it is due to a failed memory
allocation and will thus return `-ENOMEM`. `dev_err_probe()` doesn't do
anything when error is `-ENOMEM`. Therefore, remove the useless call to
`dev_err_probe()` when `devm_add_action_or_reset()` fails, and just
return the value instead.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
strcpy() is deprecated for NUL-terminated strings. Replace it with
strscpy() for revstr (local fixed-size buffer).
Signed-off-by: Miguel García <miguelgarciaroman8@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
xs_sock_recv_cmsg was failing to call xs_sock_process_cmsg for any cmsg
type other than TLS_RECORD_TYPE_ALERT (TLS_RECORD_TYPE_DATA, and other
values not handled.) Based on my reading of the previous commit
(cc5d5908: sunrpc: fix client side handling of tls alerts), it looks
like only iov_iter_revert should be conditional on TLS_RECORD_TYPE_ALERT
(but that other cmsg types should still call xs_sock_process_cmsg). On
my machine, I was unable to connect (over mtls) to an NFS share hosted
on FreeBSD. With this patch applied, I am able to mount the share again.
Fixes: cc5d59081f ("sunrpc: fix client side handling of tls alerts")
Signed-off-by: Justin Worrell <jworrell@gmail.com>
Reviewed-and-tested-by: Scott Mayhew <smayhew@redhat.com>
Link: https://lore.kernel.org/r/20250904211038.12874-3-jworrell@gmail.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Since all callers of nfs_page_group_covers_page() have already ensured
that there is only one group member, all that is required is to check
that the entire folio contains dirty data.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we're truncating part of the folio, then we need to write out the
data on the part that is not covered by the cancellation.
Fixes: d47992f86b ("mm: change invalidatepage prototype to accept length")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that all O_DIRECT reads and writes complete before copying a file
range, so that the destination is up to date.
Fixes: a5864c999d ("NFS: Do not serialise O_DIRECT reads and writes")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that all O_DIRECT reads and writes complete before cloning a file
range, so that both the source and destination are up to date.
Fixes: a5864c999d ("NFS: Do not serialise O_DIRECT reads and writes")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that all O_DIRECT reads and writes complete before calling
fallocate so that we don't race w.r.t. attribute updates.
Fixes: 99f2378322 ("NFSv4.2: Always flush out writes in nfs42_proc_fallocate()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that all O_DIRECT reads and writes are complete, and prevent the
initiation of new i/o until the setattr operation that will truncate the
file is complete.
Fixes: a5864c999d ("NFS: Do not serialise O_DIRECT reads and writes")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The NFSv4.2 copy offload and clone functions can also end up extending
the size of the destination file, so they too need to call
nfs_truncate_last_folio().
Reported-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This commit fixes the failing xfstest 'generic/363'.
When the user mmaps() an area that extends beyond the end of file, and
proceeds to write data into the folio that straddles that eof, we're
required to discard that folio data if the user calls some function that
extends the file length.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Recent commit f06bedfa62 ("pNFS/flexfiles: don't attempt pnfs on fatal DS
errors") has changed the error return type of ff_layout_choose_ds_for_read() from
NULL to an error pointer. However, not all code paths have been updated
to match the change. Thus, some non-NULL checks will accept error pointers
as a valid return value.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: f06bedfa62 ("pNFS/flexfiles: don't attempt pnfs on fatal DS errors")
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Previously nfs_local_probe() was made to disable and then attempt to
re-enable LOCALIO (via LOCALIO protocol handshake) if/when it was
called and LOCALIO already enabled.
Vague memory for _why_ this was the case is that this was useful
if/when a local NFS server were to be restarted with a local NFS
client connected to it.
But as it happens this causes an absurd amount of LOCALIO flapping
which has a side-effect of too much IO being needlessly sent to NFSD
(using RPC over the loopback network interface). This is the
definition of "serious performance loss" (that negates the point of
having LOCALIO).
So remove this mis-optimization for re-enabling LOCALIO if/when an NFS
server is restarted (which is an extremely rare thing to do). Will
revisit testing that scenario again but in the meantime this patch
restores the full benefit of LOCALIO.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fixed some minor style issues reported by checkpatch.pl. Mainly adjusted the
spacing around operators and type casts to match the kernel coding
conventions. For example:
- Changed `gpios[ndescs-i-1]` to `gpios[ndescs - i - 1]`
- Added space in `(u32*)` to make it `(u32 *)`
- Cleaned up spacing in a `for` loop
No functional changes — just making the code easier to read and consistent
with the rest of the kernel.
Signed-off-by: Darshan R. <rathod.darshan.0896@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Several display bridges (e.g. LVDS to HDMI converters) are used as sound
Digital Audio Interface (DAI) and have '#sound-dai-cells', thus they
should reference dai-common.yaml schema to allow common properties, like
DAI name.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250904083816.48076-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Toolchain and infrastructure:
- Two changes to prepare for the future Rust 1.91.0 release (expected
2025-10-30, currently in nightly): a target specification format
change and a renamed, soon-to-be-stabilized 'core' function.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmi8ciYACgkQGXyLc2ht
IW3Bdg/9G07hHjmW0TR+V7AExNTqaZKdCxY//1lFeIuiIIew/tasqqbMCzv6KPi0
UL/yk4f4bBp5oklRGxzvu5DKG31XCe5i1izML3zQ2Y04Klkj3lcfAG3u05OEhPZm
woelfv/s3Umy1Gl5xV2QfiVrocRfWlZvsTP/K+ho05FKhM476XjErn8p8U1U3tjA
KbB+EBKV5reZ14gMDwjCN5BnMpddMQleifaEX/4oRwNfw3zzKDcqB34ojOXjVcrS
0GfapPCx64FNHxSeHADQ2O9mzOSxT5cTEzcH9JBFU+p8owmjOImvvcPoYKFOn4My
btQeVzoCxeDwmLBrV8peR3nQHEwjxFuWvyhBg0SQy+51DIzhPJZdy/Z8RsrSywnH
qoirudXd/rchvUTk/dNxQC6NORuY1IGGi2uJAs4ZRrmC6UqbxjUdB08cyVY4gFj0
H3VMVaWlVWIGsPATrA2Oh0D1wsJBDYynf1oyG8R1NyYu4vCpYKMBAyJlVGlrGgq6
H+fU8BqV+LmXH9ogtk0vhT7sK2dHGSA64JR3q1ralOlQip1CsXVeaN9/B+wfjo+i
dL1qwJXkii0yxyVElHTbnugxI60hR2cgkXRnDMgJu5fBPGDdebOGtB1xxDwLnCjH
3yNiU1Eyyer/NbsqxO9ylYPvHeg4RXETHoK0gk+/jyyR0ryfbtE=
=j/MW
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Two changes to prepare for the future Rust 1.91.0 release (expected
2025-10-30, currently in nightly): a target specification format
change and a renamed, soon-to-be-stabilized 'core' function.
* tag 'rust-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: support Rust >= 1.91.0 target spec
rust: use the new name Location::file_as_c_str() in Rust >= 1.91.0
auxiliary_match_id() repeatedly calculates variable @match_size in the
for loop, however, the variable is fixed actually, so it is enough to
only calculate the variable once.
Besides, the function should return directly if name of the @auxdev
does not include '.', but it still iterates over the ID table.
Additionally, statement 'dev_name(&auxdev->dev)' is fixed, but may be
evaluated more than 3 times.
Optimize logic of the function by:
- Move the logic calculating the variable out of the for loop
- Return NULL directly if @p == NULL
- Give the statement an dedicated local variable @auxdev_name
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250903-fix_auxbus-v2-1-3eae8374fd65@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the speaker and headphone mute controls on Focusrite
Vocaster interfaces. Unlike other Focusrite interfaces, these mute
controls are per-output, not per-channel.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/aLm2Dy6+O/eLTGVn@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As part of spin lock code cleanup using guard(), a new
variable (period_elapsed) was introduced. However this variable
is never set, causing period elapsed notification to be not sent.
Set the value of period_elapsed appropiately.
This issue was reported by static coverity analyzer.
Fixes: 7a5127c2c8 ("ALSA: cs4281: Use guard() for spin locks")
Signed-off-by: Chandra Mohan Sundar <chandramohan.explore@gmail.com>
Link: https://patch.msgid.link/20250906162158.564899-1-chandramohan.explore@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Starting with commit f99508074e ("PM: domains: Detach on
device_unbind_cleanup()"), there is no longer a need to call
dev_pm_domain_detach() in the bus remove function. The
device_unbind_cleanup() function now handles this to avoid
invoking devres cleanup handlers while the PM domain is
powered off, which could otherwise lead to failures as
described in the above-mentioned commit.
Drop the explicit dev_pm_domain_detach() call and rely instead
on the flags passed to dev_pm_domain_attach() to power off the
domain.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250827100541.926350-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the order of the kernel-doc parameters in device_find_child() and
device_for_each_child*() functions to match the actual functions signature.
No functional changes.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Link: https://lore.kernel.org/r/20250831194930.2063390-1-gil.fine@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9a4681a485 ("driver core: Export get_dev_from_fwnode()") made
get_dev_from_fwnode() publicly available, but didn't document the
guarantees a caller must uphold:
get_dev_from_fwnode() obtains a reference count from the device pointer
stored in a struct fwnode_handle. While having its own reference count,
struct fwnode_handle does not keep a reference count of the device it
has a pointer to.
Consequently, a caller must guarantee that it is impossible that the
last device reference is dropped and the device is released concurrently
while calling get_dev_from_fwnode(), otherwise this is a potential UAF
and hence a bug.
Thus, document this potential race condition for get_dev_from_fwnode().
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250829205911.33142-1-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei_device lifetime was managed by devm procedure of parent device.
But such memory is freed on device_del.
Mei_device object is used by client object that may be alive after
parent device is removed.
It may lead to use-after-free if discrete graphics driver unloads
mei_gsc auxiliary device while user-space holds open handle to mei
character device.
Connect mei_device structure lifteme to mei class device lifetime
by adding mei_device free to class device remove callback.
Move exising parent device pointer to separate field in mei_device
to avoid misuse.
Allocate character device dynamically and allow to control its own
lifetime as it may outlive mei_device structure while character
device closes after parent device is removed from the system.
Leave power management on parent device as we overwrite pci runtime
pm procedure and user-space is expecting it there.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14201
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250826125617.1166546-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
