Remove redundant address-of operators (&) when assigning the
intel_idle() function pointer to the .enter field in cpuidle_state
structures.in C, the & is not needed for function names.
This change improves code consistency and readability by using the
more conventional form without the & operator.
No functional change intended.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://patch.msgid.link/20250818085124.3897921-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ina238_write_power() was attempting to clamp the user input but was
throwing away the result. Ensure that we clamp the value to the
appropriate range before it is converted into a register value.
Fixes: 0d9f596b1f ("hwmon: (ina238) Modify the calculation formula to adapt to different chips")
Cc: Wenliang Yan <wenliang202407@163.com>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When clamping a register value, the result needs to be masked against the
register size. This was missing, resulting in errors when trying to write
negative limits. Fix by masking the clamping result against the register
size.
Fixes: eacb52f010 ("hwmon: Driver for Texas Instruments INA238")
Cc: Nathan Rossi <nathan.rossi@digi.com>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
On 32bit ARM systems gcc-12 will use 32bit timestamps while gcc-13 and later
will use 64bit timestamps. The problem is that SYS_futex will continue
pointing at the 32bit system call. This makes the futex_wait test fail like
this:
waiter failed errno 110
not ok 1 futex_wake private returned: 0 Success
waiter failed errno 110
not ok 2 futex_wake shared (page anon) returned: 0 Success
waiter failed errno 110
not ok 3 futex_wake shared (file backed) returned: 0 Success
Instead of compiling differently depending on the gcc version, use the
-D_FILE_OFFSET_BITS=64 -D_TIME_BITS=64 options to ensure that 64bit timestamps
are used. Then use ifdefs to make SYS_futex point to the 64bit system call.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/20250827130011.677600-6-bigeasy@linutronix.de
Fix multiple typos and small grammar issues in help text, comments and test
messages in the futex_priv_hash test.
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/20250827130011.677600-5-bigeasy@linutronix.de
Fix format-security warnings by using proper format strings when passing
message variables to ksft_exit_fail_msg(), ksft_test_result_pass(), and
ksft_test_result_skip() function.
Thus prevent potential security issues and eliminate compiler warnings when
building with -Wformat-security.
Signed-off-by: Nai-Chen Cheng <bleach1827@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250827130011.677600-4-bigeasy@linutronix.de
The "Memory out of range" subtest of futex_numa_mpol assumes that memory
access outside of the mmap'ed area is invalid. That may not be the case
depending on the actual memory layout of the test application. When that
subtest was run on an x86-64 system with latest upstream kernel, the test
passed as an error was returned from futex_wake(). On another PowerPC system,
the same subtest failed because futex_wake() returned 0.
Bail out! futex2_wake(64, 0x86) should fail, but didn't
Looking further into the passed subtest on x86-64, it was found that an
-EINVAL was returned instead of -EFAULT. The -EINVAL error was returned
because the node value test with FLAGS_NUMA set failed with a node value
of 0x7f7f. IOW, the futex memory was accessible and futex_wake() failed
because the supposed node number wasn't valid. If that memory location
happens to have a very small value (e.g. 0), the test will pass and no
error will be returned.
Since this subtest is non-deterministic, drop it unless a guard page beyond
the mmap region is explicitly set.
The other problematic test is the "Memory too small" test. The futex_wake()
function returns the -EINVAL error code because the given futex address isn't
8-byte aligned, not because only 4 of the 8 bytes are valid and the other
4 bytes are not. So change the name of this subtest to "Mis-aligned futex" to
reflect the reality.
[ bp: Massage commit message. ]
Fixes: 3163369407 ("selftests/futex: Add futex_numa_mpol")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/20250827130011.677600-3-bigeasy@linutronix.de
On Octal DTR capable flashes like Micron Xcella the writes cannot start
or end at an odd address in Octal DTR mode. Extra 0xff bytes need to be
appended or prepended to make sure the start address and end address are
even. 0xff is used because on NOR flashes a program operation can only
flip bits from 1 to 0, not the other way round. 0 to 1 flip needs to
happen via erases.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250708091646.292-2-ziniu.wang_1@nxp.com
On Octal DTR capable flashes like Micron Xcella reads cannot start or
end at an odd address in Octal DTR mode. Extra bytes need to be read at
the start or end to make sure both the start address and length remain
even.
To avoid allocating too much extra memory, thereby putting unnecessary
memory pressure on the system, the temporary buffer containing the extra
padding bytes is capped at PAGE_SIZE bytes. The rest of the 2-byte
aligned part should be read directly in the main buffer.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250708091646.292-1-ziniu.wang_1@nxp.com
Logging messages that show some type of "out of memory" error are generally
unnecessary as there is a generic message and a stack dump done by the
memory subsystem. These messages generally increase kernel size without
much added value[1].
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value
instead.
[1]: https://lore.kernel.org/lkml/1402419340.30479.18.camel@joe-AO725/
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250820131416.500048-1-liaoyuanhong@vivo.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Using a single value of 22500000 for both 48000Hz and 44100Hz audio
will sometimes result in returning wrong dividers due to rounding.
Update the code to use the actual value for both.
Fixes: 51b2bb3f25 ("ASoC: wm8974: configure pll and mclk divider automatically")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250821082639.1301453-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using a single value of 22500000 for both 48000Hz and 44100Hz audio
will sometimes result in returning wrong dividers due to rounding.
Update the code to use the actual value for both.
Fixes: 294833fc9e ("ASoC: wm8940: Rewrite code to set proper clocks")
Reported-by: Ankur Tyagi <ankur.tyagi85@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Ankur Tyagi <ankur.tyagi85@gmail.com>
Link: https://patch.msgid.link/20250821082639.1301453-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for 2bit grayscale and use it for XRGB8888 when grayscale is
supported.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-6-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Convert XRGB8888 to 2bit grayscale.
It uses drm_fb_xrgb8888_to_gray8() to convert the pixels to gray8 as an
intermediate step before converting to gray2.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-5-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
As reported by Stephen, building docs with O= is now
broken. Fix it by ensuring that it will seek files under
Kernel source tree.
The original logic was defined to accept including files
under Documentation/output. The new logic doesn't need it
anymore for media, but it might still be useful to preserve
the previous behavior. So, I ended preserving it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20250901142639.4de35a11@canb.auug.org.au/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/da91980ce42f31730dc982920167b2757b9d2769.1756732363.git.mchehab+huawei@kernel.org
Simon Schuster <schuster.simon@siemens-energy.com> says:
This series adds support for the clone3 system call to the nios2
architecture. This addresses the build-time warning "warning: clone3()
entry point is missing, please fix" introduced in 505d66d1ab
("clone3: drop __ARCH_WANT_SYS_CLONE3 macro"). The implementation passes
the relevant clone3 tests of kselftest when applied on top of
next-20250815:
./run_kselftest.sh
TAP version 13
1..4
# selftests: clone3: clone3
ok 1 selftests: clone3: clone3
# selftests: clone3: clone3_clear_sighand
ok 2 selftests: clone3: clone3_clear_sighand
# selftests: clone3: clone3_set_tid
ok 3 selftests: clone3: clone3_set_tid
# selftests: clone3: clone3_cap_checkpoint_restore
ok 4 selftests: clone3: clone3_cap_checkpoint_restore
The series also includes a small patch to kernel/fork.c that ensures
that clone_flags are passed correctly on architectures where unsigned
long is insufficient to store the u64 clone_flags. It is marked as a fix
for stable backporting.
As requested, in v2, this series now further tries to correct this type
error throughout the whole code base. Thus, it now touches a larger
number of subsystems and all architectures.
Therefore, another test was performed for ARCH=x86_64 (as a
representative for 64-bit architectures). Here, the series builds cleanly
without warnings on defconfig with CONFIG_SECURITY_APPARMOR=y and
CONFIG_SECURITY_TOMOYO=y (to compile-check the LSM-related changes).
The build further successfully passes testing/selftests/clone3 (with the
patch from 20241105062948.1037011-1-zhouyuhang1010@163.com to prepare
clone3_cap_checkpoint_restore for compatibility with the newer libcap
version on my system).
* patches from https://lore.kernel.org/20250901-nios2-implement-clone3-v2-0-53fcf5577d57@siemens-energy.com:
nios2: implement architecture-specific portion of sys_clone3
arch: copy_thread: pass clone_flags as u64
copy_process: pass clone_flags as u64 across calltree
copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64)
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-0-53fcf5577d57@siemens-energy.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
This commit adds the sys_clone3 entry point for nios2. An
architecture-specific wrapper (__sys_clone3) is required to save and
restore additional registers to the kernel stack via SAVE_SWITCH_STACK
and RESTORE_SWITCH_STACK.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-4-53fcf5577d57@siemens-energy.com
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
With the introduction of clone3 in commit 7f192e3cd3 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit, with a new type of u64 for the flags.
However, for most consumers of clone_flags the interface was not
changed from the previous type of unsigned long.
While this works fine as long as none of the new 64-bit flag bits
(CLONE_CLEAR_SIGHAND and CLONE_INTO_CGROUP) are evaluated, this is still
undesirable in terms of the principle of least surprise.
Thus, this commit fixes all relevant interfaces of the copy_thread
function that is called from copy_process to consistently pass
clone_flags as u64, so that no truncation to 32-bit integers occurs on
32-bit architectures.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-3-53fcf5577d57@siemens-energy.com
Fixes: c5febea095 ("fork: Pass struct kernel_clone_args into copy_thread")
Acked-by: Guo Ren (Alibaba Damo Academy) <guoren@kernel.org>
Acked-by: Andreas Larsson <andreas@gaisler.com> # sparc
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
With the introduction of clone3 in commit 7f192e3cd3 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit, with a new type of u64 for the flags.
However, for most consumers of clone_flags the interface was not
changed from the previous type of unsigned long.
While this works fine as long as none of the new 64-bit flag bits
(CLONE_CLEAR_SIGHAND and CLONE_INTO_CGROUP) are evaluated, this is still
undesirable in terms of the principle of least surprise.
Thus, this commit fixes all relevant interfaces of callees to
sys_clone3/copy_process (excluding the architecture-specific
copy_thread) to consistently pass clone_flags as u64, so that
no truncation to 32-bit integers occurs on 32-bit architectures.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-2-53fcf5577d57@siemens-energy.com
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
With the introduction of clone3 in commit 7f192e3cd3 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit. However, the signature of the copy_*
helper functions (e.g., copy_sighand) used by copy_process was not
adapted.
As such, they truncate the flags on any 32-bit architectures that
supports clone3 (arc, arm, csky, m68k, microblaze, mips32, openrisc,
parisc32, powerpc32, riscv32, x86-32 and xtensa).
For copy_sighand with CLONE_CLEAR_SIGHAND being an actual u64
constant, this triggers an observable bug in kernel selftest
clone3_clear_sighand:
if (clone_flags & CLONE_CLEAR_SIGHAND)
in function copy_sighand within fork.c will always fail given:
unsigned long /* == uint32_t */ clone_flags
#define CLONE_CLEAR_SIGHAND 0x100000000ULL
This commit fixes the bug by always passing clone_flags to copy_sighand
via their declared u64 type, invariant of architecture-dependent integer
sizes.
Fixes: b612e5df45 ("clone3: add CLONE_CLEAR_SIGHAND")
Cc: stable@vger.kernel.org # linux-5.5+
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-1-53fcf5577d57@siemens-energy.com
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Depending on which display that is connected to the controller, an
"1" means either a black or a white pixel.
The supported formats (R1/R2/XRGB8888) expects the pixels
to map against (4bit):
00 => Black
01 => Dark Gray
10 => Light Gray
11 => White
If this is not what the display map against, make it possible to invert
the pixels.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-4-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Depending on which display that is connected to the controller, an "1"
means either a black or a white pixel.
The supported format (R1) expects the pixels to map against:
0 => Black
1 => White
If this is not what the display map against, the controller has support
to invert these values.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-3-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Depending on which display that is connected to the controller, an "1"
means either a black or a white pixel.
The supported formats (R1/R2/XRGB8888) expects the pixels
to map against (4bit):
00 => Black
01 => Dark Gray
10 => Light Gray
11 => White
If this is not what the display map against, the controller has support
to invert these values.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-2-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The comment describes the pixel data format as stated in
the st7571 datasheet, which is not necessary the same
as for the connected display.
Instead, describe the expected pixel data format which is used for
R1/R2/XRGB8888.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-1-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Now that the vbios code uses a non-bound `Device` instance, store an
`ARef` to it at construction time so we can use it for logging without
having to carry an extra argument on every method for that sole purpose.
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250808-vbios_device-v1-2-834bbbab6471@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
The passed pci::Device is exclusively used for logging purposes, so it
can be replaced by a regular device::Device, which allows us to remove
the `as_ref()` indirections at each logging site.
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250808-vbios_device-v1-1-834bbbab6471@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Change the 'ret' variable from u32 to int to store negative error codes or
zero returned by of_property_read_u32().
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes: 0fbeae70ee ("regulator: add SCMI driver")
Link: https://patch.msgid.link/20250829101411.625214-1-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Samsung S3C24xx family of SoCs was removed from the Linux kernel in the
commit 61b7f8920b ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of its compatibles and platform IDs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Change the 'ret' variable from u32 to int in pl35x_nand_probe() to store
negative error codes or zero;
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but can be confusing. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
While enabling clock, we incorrectly log 'ref clk' as 'cfg ahb clk'
Fix this since the devicetree bindings mentions it as ref clock.
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250826105254.3758803-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We have 2 similar functions, both converts date from snd_kcontrol to
snd_soc_component.
(A) snd_soc_kcontrol_component()
(B) snd_soc_dapm_kcontrol_component()
(A) is just wrapper for snd_kcontrol_chip().
(B) is for more complex conversion.
Having similar functions is confusable. So (A) will be replaced to
original snd_kcontrol_chip(). (B) will be stay, but the function
name should be xx_to_xx().
And it is defined at soc-component.h. It should be implemented at
soc-dapm.c.
This patch renames it to snd_soc_dapm_kcontrol_to_component(), and
move to soc-dapm.c.
This patch keeps compatible by using define, but old name will be replaced
on each drivers and removed from ASoC in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/871poyy53x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dapm_kcontrol_get_value() is global function, adds snd_soc_ prefix
This patch keeps compatible by using define, but old name will be replaced
on each drivers and removed from ASoC in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87349ey546.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_kcontrol_dapm() is unclear naming, rename it to
snd_soc_dapm_kcontrol_to_dapm(). This is prepare for dapm cleanup.
This patch keeps compatible by using define, but old name will be replaced
on each drivers and removed from ASoC in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/874ituy54c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_kcontrol_widget() is unclear naming, rename it to
snd_soc_dapm_kcontrol_to_widget(). This is prepare for dapm cleanup.
This patch keeps compatible by using define, but old name will be replaced
on each drivers and removed from ASoC in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875xeay54j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
driver support indirect read and indirect write operation with
assumption no force device removal(unbind) operation. However
force device removal(removal) is still available to root superuser.
Unbinding driver during operation causes kernel crash. This changes
ensure driver able to handle such operation for indirect read and
indirect write by implementing refcount to track attached devices
to the controller and gracefully wait and until attached devices
remove operation completed before proceed with removal operation.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Niravkumar L Rabara <nirav.rabara@altera.com>
Link: https://patch.msgid.link/8704fd6bd2ff4d37bba4a0eacf5eba3ba001079e.1756168074.git.khairul.anuar.romli@altera.com
Signed-off-by: Mark Brown <broonie@kernel.org>
S32G doesn't have the max prescale erratum (default) and it can query
the max number of CS from hardware, so add those settings.
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-9-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add query_hw_for_num_cs in devtype to avoid directly checking compatible
string "fsl,imx93-spi".
No functionality change.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-8-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This erratum only ever results in a max value of 1, otherwise the full 3
bits are available. To avoid repeating the same default prescale value
for every new device's devdata, treat 0 as no limit (7) and only set a
value when the erratum is present.
Change the field to be 3 bits to catch out of range definitions.
No functionality change.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-7-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible strings 'nxp,s32g2-lpspi' and 'nxp,s32g3-lpspi' for S32G2
and S32G3. Require nxp,s32g3-lpspi to fallback to nxp,s32g2-lpspi since
they are currently compatible.
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-5-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Clear the error flags after disabling the module to avoid the case when
a flag is set again between flag clear and module disable. And use
SR_CLEAR_MASK to replace hardcoded value for improved readability.
Although fsl_lpspi_reset() was only introduced in commit a15dc3d657
("spi: lpspi: Fix CLK pin becomes low before one transfer"), the
original driver only reset SR in the interrupt handler, making it
vulnerable to the same issue. Therefore the fixes commit is set at the
introduction of the driver.
Fixes: 5314987de5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-4-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In DMA mode fsl_lpspi_reset() is always called at the end, even when the
transfer is aborted. In PIO mode aborts skip the reset leaving the FIFO
filled and the module enabled.
Fix it by always calling fsl_lpspi_reset().
Fixes: a15dc3d657 ("spi: lpspi: Fix CLK pin becomes low before one transfer")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-3-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
