This patch adds support for the TRIGGER_NETDEV_LINK trigger. It activates
the LED when a link is established, regardless of the speed.
Tested on Orange Pi PC2 with RTL8211E PHY.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250825211059.143231-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"What is F2FS" is rather a mistitle for the whole f2fs docs, as it
implies the overview section (before "Background and design issues"
section) and the docs covers beyond that: from mount options to
filesystem implementation details.
Retitle and add explicit overview section.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Indent description text so that compression_mode numbered list gets
rendered as such in htmldocs output.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Write hint policy table has two rows which act as section rows: buffered
io and direct io, yet these rows are written as normal rows instead.
Column-span them.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Format compression_algorithm subtable as reST table as it does the
semantic job rather than normal paragraph.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
errors=%s subtable is shown in htmldocs output as long-running paragraph
instead due to missing separator from its previous paragraph. Add it.
Fixes: b62e71be21 ("f2fs: support errors=remount-ro|continue|panic mountoption")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As syzbot reported below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/file.c:1243!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5354 Comm: syz.0.0 Not tainted 6.17.0-rc1-syzkaller-00211-g90d970cade8e #0 PREEMPT(full)
RIP: 0010:f2fs_truncate_hole+0x69e/0x6c0 fs/f2fs/file.c:1243
Call Trace:
<TASK>
f2fs_punch_hole+0x2db/0x330 fs/f2fs/file.c:1306
f2fs_fallocate+0x546/0x990 fs/f2fs/file.c:2018
vfs_fallocate+0x666/0x7e0 fs/open.c:342
ksys_fallocate fs/open.c:366 [inline]
__do_sys_fallocate fs/open.c:371 [inline]
__se_sys_fallocate fs/open.c:369 [inline]
__x64_sys_fallocate+0xc0/0x110 fs/open.c:369
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f1e65f8ebe9
w/ a fuzzed image, f2fs may encounter panic due to it detects inconsistent
truncation range in direct node in f2fs_truncate_hole().
The root cause is: a non-inode dnode may has the same footer.ino and
footer.nid, so the dnode will be parsed as an inode, then ADDRS_PER_PAGE()
may return wrong blkaddr count which may be 923 typically, by chance,
dn.ofs_in_node is equal to 923, then count can be calculated to 0 in below
statement, later it will trigger panic w/ f2fs_bug_on(, count == 0 || ...).
count = min(end_offset - dn.ofs_in_node, pg_end - pg_start);
This patch introduces a new node_type NODE_TYPE_NON_INODE, then allowing
passing the new_type to sanity_check_node_footer in f2fs_get_node_folio()
to detect corruption that a non-inode dnode has the same footer.ino and
footer.nid.
Scripts to reproduce:
mkfs.f2fs -f /dev/vdb
mount /dev/vdb /mnt/f2fs
touch /mnt/f2fs/foo
touch /mnt/f2fs/bar
dd if=/dev/zero of=/mnt/f2fs/foo bs=1M count=8
umount /mnt/f2fs
inject.f2fs --node --mb i_nid --nid 4 --idx 0 --val 5 /dev/vdb
mount /dev/vdb /mnt/f2fs
xfs_io /mnt/f2fs/foo -c "fpunch 6984k 4k"
Cc: stable@kernel.org
Reported-by: syzbot+b9c7ffd609c3f09416ab@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/68a68e27.050a0220.1a3988.0002.GAE@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Bitwise AND was intended instead of OR. With the current code the
condition is always true.
Fixes: cbdd16b818 ("HID: i2c-hid: Make elan touch controllers power on after panel is enabled")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Pin-yen Lin <treapking@chromium.org>
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/aK8Au3CgZSTvfEJ6@stanley.mountain
Jiawei Zhao says:
====================
libbpf: fix USDT SIB argument handling causing unrecognized register error
When using GCC on x86-64 to compile an usdt prog with -O1 or higher
optimization, the compiler will generate SIB addressing mode for global
array, e.g. "1@-96(%rbp,%rax,8)".
The current USDT implementation in libbpf cannot parse these two formats,
causing `bpf_program__attach_usdt()` to fail with -ENOENT
(unrecognized register).
This patch series adds support for SIB addressing mode in USDT probes.
The main changes include:
- add correct handling logic for SIB-addressed arguments in
`parse_usdt_arg`.
- add an usdt_o2 test case to cover SIB addressing mode.
Testing shows that the SIB probe correctly generates 8@(%rcx,%rax,8)
argument spec and passes all validation checks.
The modification history of this patch series:
Change since v1:
- refactor the code to make it more readable
- modify the commit message to explain why and how
Change since v2:
- fix the `scale` uninitialized error
Change since v3:
- force -O2 optimization for usdt.test.o to generate SIB addressing usdt
and pass all test cases.
Change since v4:
- split the patch into two parts, one for the fix and the other for the
test
Change since v5:
- Only enable optimization for x86 architecture to generate SIB addressing
usdt argument spec.
Change since v6:
- Add an usdt_o2 test case to cover SIB addressing mode.
- Reinstate the usdt.c test case.
Change since v7:
- Refactor modifications to __bpf_usdt_arg_spec to avoid increasing its size,
achieving better compatibility
- Fix some minor code style issues
- Refactor the usdt_o2 test case, removing semaphore and adding GCC attribute
to force -O2 optimization
Change since v8:
- Refactor the usdt_o2 test case, using assembly to force SIB addressing mode.
Change since v9:
- Only enable the usdt_o2 test case on x86_64 and i386 architectures since the
SIB addressing mode is only supported on x86_64 and i386.
Change since v10:
- Replace `__attribute__((optimize("O2")))` with `#pragma GCC optimize("O1")`
to fix the issue where the optimized compilation condition works improperly.
- Renamed test case usdt_o2 and relevant files name to usdt_o1 in that O1
level optimization is enough to generate SIB addressing usdt argument spec.
Change since v11:
- Replace `STAP_PROBE1` with `STAP_PROBE_ASM`
- Use bit fields instead of bit shifting operations
- Merge the usdt_o1 test case into the usdt test case
Change since v12:
- This patch is same with the v12 but with a new version number.
Change since v13(resolve some review comments):
- https://lore.kernel.org/bpf/CAEf4BzZWd2zUC=U6uGJFF3EMZ7zWGLweQAG3CJWTeHy-5yFEPw@mail.gmail.com/
- https://lore.kernel.org/bpf/CAEf4Bzbs3hV_Q47+d93tTX13WkrpkpOb4=U04mZCjHyZg4aVdw@mail.gmail.com/
Change since v14:
- fix a typo in __bpf_usdt_arg_spec
Change since v15(resolve some review comments):
- https://lore.kernel.org/bpf/CAEf4BzaxuYijEfQMDFZ+CQdjxLuDZiesUXNA-SiopS+5+VxRaA@mail.gmail.com/
- https://lore.kernel.org/bpf/CAEf4BzaHi5kpuJ6OVvDU62LT5g0qHbWYMfb_FBQ3iuvvUF9fag@mail.gmail.com/
- https://lore.kernel.org/bpf/d438bf3a-a9c9-4d34-b814-63f2e9bb3a85@linux.dev/
====================
Link: https://patch.msgid.link/20250827053128.1301287-1-phoenix500526@163.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
When using GCC on x86-64 to compile an usdt prog with -O1 or higher
optimization, the compiler will generate SIB addressing mode for global
array, e.g. "1@-96(%rbp,%rax,8)".
In this patch:
- enrich subtest_basic_usdt test case to cover SIB addressing usdt argument spec
handling logic
Signed-off-by: Jiawei Zhao <phoenix500526@163.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250827053128.1301287-3-phoenix500526@163.com
On x86-64, USDT arguments can be specified using Scale-Index-Base (SIB)
addressing, e.g. "1@-96(%rbp,%rax,8)". The current USDT implementation
in libbpf cannot parse this format, causing `bpf_program__attach_usdt()`
to fail with -ENOENT (unrecognized register).
This patch fixes this by implementing the necessary changes:
- add correct handling for SIB-addressed arguments in `bpf_usdt_arg`.
- add adaptive support to `__bpf_usdt_arg_type` and
`__bpf_usdt_arg_spec` to represent SIB addressing parameters.
Signed-off-by: Jiawei Zhao <phoenix500526@163.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250827053128.1301287-2-phoenix500526@163.com
pci_acpi_preserve_config() leaks memory by returning early without freeing
the ACPI object on success. Fix that by always freeing the obj, which is
not needed by the caller.
Fixes: 9d7d5db8e7 ("PCI: Move PRESERVE_BOOT_CONFIG _DSM evaluation to pci_register_host_bridge()")
Signed-off-by: Nirmoy Das <nirmoyd@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250825214642.142135-1-nirmoyd@nvidia.com
Add new selftest to test the abstract multiplication technique(s) used
by the verifier, following the recent improvement in tnum
multiplication (tnum_mul). One of the newly added programs,
verifier_mul/mul_precise, results in a false positive with the old
tnum_mul, while the program passes with the latest one.
Signed-off-by: Nandakumar Edamana <nandakumar@nandakumar.co.in>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250826034524.2159515-2-nandakumar@nandakumar.co.in
Drop the value-mask decomposition technique and adopt straightforward
long-multiplication with a twist: when LSB(a) is uncertain, find the
two partial products (for LSB(a) = known 0 and LSB(a) = known 1) and
take a union.
Experiment shows that applying this technique in long multiplication
improves the precision in a significant number of cases (at the cost
of losing precision in a relatively lower number of cases).
Signed-off-by: Nandakumar Edamana <nandakumar@nandakumar.co.in>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Reviewed-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250826034524.2159515-1-nandakumar@nandakumar.co.in
A possible inconsistent update of refcount was identified in `smb2_compound_op`.
Such inconsistent update could lead to possible resource leaks.
Why it is a possible bug:
1. In the comment section of the function, it clearly states that the
reference to `cfile` should be dropped after calling this function.
2. Every control flow path would check and drop the reference to
`cfile`, except the patched one.
3. Existing callers would not handle refcount update of `cfile` if
-ENOMEM is returned.
To fix the bug, an extra goto label "out" is added, to make sure that the
cleanup logic would always be respected. As the problem is caused by the
allocation failure of `vars`, the cleanup logic between label "finished"
and "out" can be safely ignored. According to the definition of function
`is_replayable_error`, the error code of "-ENOMEM" is not recoverable.
Therefore, the replay logic also gets ignored.
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Make sure to drop the reference to the pwrctrl device taken by
of_find_device_by_node() when stopping a PCI device.
Fixes: 681725afb6 ("PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org # v6.13
Link: https://patch.msgid.link/20250721153609.8611-4-johan+linaro@kernel.org
Make sure to drop the references to the pwrctrl OF node and device taken by
of_pci_find_child_device() and of_find_device_by_node() respectively when
scanning the bus.
Fixes: 957f40d039 ("PCI/pwrctrl: Move creation of pwrctrl devices to pci_scan_device()")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org # v6.15
Link: https://patch.msgid.link/20250721153609.8611-3-johan+linaro@kernel.org
Make sure to drop the reference to the pwrctrl device taken by
of_find_device_by_node() when registering a PCI device.
Fixes: b458ff7e81 ("PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org # v6.13
Link: https://patch.msgid.link/20250721153609.8611-2-johan+linaro@kernel.org
The frontend exposes an API to the driver to send invalidations, handles
sequence number assignment, synchronization (fences), and provides a
timeout mechanism. The backend issues the actual invalidation to the
hardware (or firmware).
The new layering easily allows issuing TLB invalidations to different
hardware or firmware interfaces.
Normalize some naming while here too.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-10-stuart.summers@intel.com
Break out the GuC specific code into helpers as part of the process to
decouple frontback TLB invalidation code from the backend.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-9-stuart.summers@intel.com
It is a bit backwards to add a TLB invalidation fence to the pending
list after issuing the invalidation. Perform this step before issuing
the TLB invalidation in a helper function.
v2: Make sure the seqno_lock mutex covers the send as well (Matt)
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-8-stuart.summers@intel.com
Decouple TLB invalidations from the GT by updating the TLB invalidation
layer to accept a `struct xe_tlb_inval` instead of a `struct xe_gt`.
Also, rename *gt_tlb* to *tlb*. The internals of the TLB invalidation
code still operate on a GT, but this is now hidden from the rest of the
driver.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-7-stuart.summers@intel.com
Extract TLB invalidation state into a structure to decouple TLB
invalidations from the GT, allowing the structure to be embedded
anywhere in the driver.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-5-stuart.summers@intel.com
tlb_invalidation is a bit verbose leading to ugly wraps in the code,
shorten to tlb_inval.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-4-stuart.summers@intel.com
Add a new _fini() routine on the GT TLB invalidation
side to handle this worker cleanup on driver teardown.
v2: Move the TLB teardown to the gt fini() routine called during
gt_init rather than in gt_alloc. This way the GT structure stays
alive for while we reset the TLB state.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-3-stuart.summers@intel.com
Currently the CT lock is used to cover TLB invalidation
sequence number updates. In an effort to separate the GuC
back end tracking of communication with the firmware from
the front end TLB sequence number tracking, add a new lock
here to specifically track those sequence number updates
coming in from the user.
Apart from the CT lock, we also have a pending lock to
cover both pending fences and sequence numbers received
from the back end. Those cover interrupt cases and so
it makes not to overload those with sequence numbers
coming in from new transactions. In that way, we'll employ
a mutex here.
v2: Actually add the correct lock rather than just dropping
it... (Matt)
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-2-stuart.summers@intel.com
Although it's possible to change the attributes in runtime, they have no
effect after the driver is already bound to the device. Check for that
and return -EBUSY in that case.
This should help users understand what's going on when the behavior is
not changing even if the value from the configfs is "right", but it got
to that state too late.
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://lore.kernel.org/r/20250826153210.3068808-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
x86 does not use CONFIG_GENERIC_MSI_IRQ, and trying to enable it anyway
results in a build failure:
In file included from include/linux/ssb/ssb.h:10,
from drivers/ssb/pcihost_wrapper.c:18:
include/linux/gpio/driver.h:41:33: error: field 'msiinfo' has incomplete type
41 | msi_alloc_info_t msiinfo;
| ^~~~~~~
In file included from include/linux/kvm_host.h:19,
from arch/x86/events/intel/core.c:17:
include/linux/msi.h:528:33: error: field 'alloc_info' has incomplete type
528 | msi_alloc_info_t alloc_info;
Change the driver to actually build without this symbol and remove the
incorrect 'select' statements.
Fixes: e8b18c1173 ("cdx: Fix missing GENERIC_MSI_IRQ on compile test")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Link: https://lore.kernel.org/r/20250826043852.2206008-1-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Changed jobs and Huawei email is no longer valid.
Also, since I no longer have access to HiSilicon hardware,
remove myself from HISILICON PCI DRIVER maintainer entry.
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Shameer Kolothum <skolothumtho@nvidia.com>
Link: https://lore.kernel.org/r/20250827143215.2311-1-skolothumtho@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Introduce run.sh, a script to help with running VFIO selftests. The
script is intended to be used for both humans manually running VFIO
selftests, and to incorporate into test automation where VFIO selftests
may run alongside other tests. As such the script aims to be hermetic,
returning the system to the state it was before the test started.
The script takes as input the BDF of a device to use and a command to
run (typically the command would be a VFIO selftest). e.g.
$ ./run.sh -d 0000:6a:01.0 ./vfio_pci_device_test
or
$ ./run.sh -d 0000:6a:01.0 -- ./vfio_pci_device_test
The script then handles unbinding device 0000:6a:01.0 from its current
driver, binding it to vfio-pci, running the test, unbinding from
vfio-pci, and binding back to the original driver.
When run.sh runs the provided test, it does so by appending the BDF as
the last parameter. For example:
$ ./run.sh -d 0000:6a:01.0 -- echo hello
Results in the following being printed to stdout:
hello 0000:6a:01.0
The script also supports a mode where it can break out into a shell so
that multiple tests can be run manually.
$ ./run.sh -d 0000:6a:01.0 -s
$ echo $VFIO_SELFTESTS_BDF
$ ./vfio_pci_device_test
$ exit
Choosing which device to use is up to the user.
In the future this script should be extensible to tests that want to use
multiple devices. The script can support accepting -d BDF multiple times
and parse them into an array, setup all the devices, pass the list of
BDFs to the test, and then cleanup all the devices.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-31-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that VFIO selftests support iommufd, make it the default mode.
IOMMUFD is the successor to VFIO_TYPE1{,v2}_IOMMU and all new features
are being added there, so it's a slightly better fit as the default
mode.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-30-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add a new IOMMU mode for using iommufd directly. In this mode userspace
opens /dev/iommu and binds it to a device FD acquired through
/dev/vfio/devices/vfioX.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-29-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add new IOMMU modes for using iommufd in compatibility mode with
VFIO_TYPE1_IOMMU and VFIO_TYPE1v2_IOMMU.
In these modes, VFIO selftests will open /dev/iommu and treats it as a
container FD (as if it had opened /dev/vfio/vfio) and the kernel
translates the container ioctls to iommufd calls transparently.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-28-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add a new IOMMU mode for using VFIO_TYPE1v2_IOMMU.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-27-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Automatically replicate vfio_dma_mapping_test and vfio_pci_driver_test
across all supported IOMMU modes using fixture variants. Both of these
tests exercise DMA mapping to some degree so having automatic coverage
across all IOMMU modes will help catch bugs.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-26-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Encapsulate the "IOMMU mode" a test should use behind a new struct.
In the future this will be used to support other types of IOMMUs besides
VFIO_TYPE1_IOMMU, and allow users to select the mode on the command
line.
No functional change intended.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-25-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Move the helper function to get the VFIO cdev path to libvfio so that it
can be used in libvfio in a subsequent commit.
No functional change intended.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-24-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add a driver to VFIO selftests for Intel DSA devices.
For now the driver only supports up to 32 batches and 1024 copies per
batch, which were the limits of the hardware this commit was tested
with. This is sufficient to generate 9+ minutes of DMA memcpys at a rate
of over 30 GB/s. This should be plenty to stress test VFIO and the IOMMU.
The driver does not yet support requesting interrupt handles, as this
commit was not tested against hardware that requires it.
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-23-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Allow drivers/dma/idxd/registers.h to be included from userspace in
tools/ by adjusting the include path to uapi/linux/idxd.h if __KERNEL__
is not defined.
A subsequent commit will use registers.h to implement a userspace driver
for Intel DSA devices in tools/testing/selftests/vfio.
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-22-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Import iosubmit_cmds512() from arch/x86/include/asm/io.h into tools/ so
it can be used by VFIO selftests to interact with Intel DSA devices.
Also pull in movdir64b() from arch/x86/include/asm/special_insns.h into
tools/, which is the underlying instruction used by iosubmit_cmds512().
Changes made when importing: None
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-21-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add a driver for the Intel CBDMA device. This driver is based on and
named after the Linux driver for this device (drivers/dma/ioat/) and
also based on previous work from Peter Shier <pshier@google.com>.
The driver aims to be as simple as possible. It uses a single descriptor
to issue DMA operations, and only supports the copy operation. For "DMA
storms", the driver kicks off the maximum number of maximum-sized DMA
operations. On Skylake server parts, this was 2^16-1 copies of size 2M
and lasts about 15 seconds.
Create symlinks to drivers/dma/ioat/{hw.h,registers.h} to get access to
various macros (e.g. IOAT_CHANCMD_RESET) and struct ioat_dma_descriptor.
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-20-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Move the function prototype for system_has_dca_enabled() from hw.h to
dma.h. This allows hw.h to be included from tools/, which will be used
in a subsysequent commit to implement a userspace driver for Intel CBDMA
devices in tools/testing/selftests/vfio.
No functional change intended.
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-19-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add a symlink to include/linux/pci_ids.h to tools/include/. This will be
used by VFIO selftests in subsequent commits to match device and vendor
IDs.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-18-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Import the x86-specific overrides for <asm-generic/io.h> from the kernel
headers into tools/include/.
Changes made when importing:
- Replace CONFIG_X86_64 with __x86_64__.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250822212518.4156428-17-dmatlack@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
