Enable KVM_GUEST_MEMFD for all KVM x86 64-bit builds, i.e. for "default"
VM types when running on 64-bit KVM. This will allow using guest_memfd
to back non-private memory for all VM shapes, by supporting mmap() on
guest_memfd.
Opportunistically clean up various conditionals that become tautologies
once x86 selects KVM_GUEST_MEMFD more broadly. Specifically, because
SW protected VMs, SEV, and TDX are all 64-bit only, private memory no
longer needs to take explicit dependencies on KVM_GUEST_MEMFD, because
it is effectively a prerequisite.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The comment that points to the path where the user-visible memslot flags
are refers to an outdated path and has a typo.
Update the comment to refer to the correct path.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_slot_can_be_private() to kvm_slot_has_gmem() to improve
clarity and accurately reflect its purpose.
The function kvm_slot_can_be_private() was previously used to check if a
given kvm_memory_slot is backed by guest_memfd. However, its name
implied that the memory in such a slot was exclusively "private".
As guest_memfd support expands to include non-private memory (e.g.,
shared host mappings), it's important to remove this association. The
new name, kvm_slot_has_gmem(), states that the slot is backed by
guest_memfd without making assumptions about the memory's privacy
attributes.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The original name was vague regarding its functionality. This Kconfig
option specifically enables and gates the kvm_gmem_populate() function,
which is responsible for populating a GPA range with guest data.
The new name, HAVE_KVM_ARCH_GMEM_POPULATE, describes the purpose of the
option: to enable arch-specific guest_memfd population mechanisms. It
also follows the same pattern as the other HAVE_KVM_ARCH_* configuration
options.
This improves clarity for developers and ensures the name accurately
reflects the functionality it controls, especially as guest_memfd
support expands beyond purely "private" memory scenarios.
Temporarily keep KVM_GENERIC_PRIVATE_MEM as an x86-only config so as to
minimize churn, and to hopefully make it easier to see what features
require HAVE_KVM_ARCH_GMEM_POPULATE. On that note, omit GMEM_POPULATE
for KVM_X86_SW_PROTECTED_VM, as regular ol' memset() suffices for
software-protected VMs.
As for KVM_GENERIC_PRIVATE_MEM, a future change will select KVM_GUEST_MEMFD
for all 64-bit KVM builds, at which point the intermediate config will
become obsolete and can/will be dropped.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Select KVM_GENERIC_PRIVATE_MEM and KVM_GENERIC_MEMORY_ATTRIBUTES directly
from KVM_INTEL_TDX, i.e. if and only if TDX support is fully enabled in
KVM. There is no need to enable KVM's private memory support just because
the core kernel's INTEL_TDX_HOST is enabled.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Message-ID: <20250729225455.670324-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that KVM_SW_PROTECTED_VM doesn't have a hidden dependency on KVM_X86,
select KVM_GENERIC_PRIVATE_MEM from within KVM_SW_PROTECTED_VM instead of
conditionally selecting it from KVM_X86.
No functional change intended.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Message-ID: <20250729225455.670324-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make all vendor neutral KVM x86 configs depend on KVM_X86, not just KVM,
i.e. gate them on at least one vendor module being enabled and thus on
kvm.ko actually being built. Depending on just KVM allows the user to
select the configs even though they won't actually take effect, and more
importantly, makes it all too easy to create unmet dependencies. E.g.
KVM_GENERIC_PRIVATE_MEM can't be selected by KVM_SW_PROTECTED_VM, because
the KVM_GENERIC_MMU_NOTIFIER dependency is select by KVM_X86.
Hiding all sub-configs when neither KVM_AMD nor KVM_INTEL is selected also
helps communicate to the user that nothing "interesting" is going on, e.g.
--- Virtualization
<M> Kernel-based Virtual Machine (KVM) support
< > KVM for Intel (and compatible) processors support
< > KVM for AMD processors support
Fixes: ea4290d77b ("KVM: x86: leave kvm.ko out of the build if no vendor module is requested")
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Message-ID: <20250729225455.670324-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the Kconfig option CONFIG_KVM_PRIVATE_MEM to
CONFIG_KVM_GUEST_MEMFD. The original name implied that the feature only
supported "private" memory. However, CONFIG_KVM_PRIVATE_MEM enables
guest_memfd in general, which is not exclusively for private memory.
Subsequent patches in this series will add guest_memfd support for
non-CoCo VMs, whose memory is not private.
Renaming the Kconfig option to CONFIG_KVM_GUEST_MEMFD more accurately
reflects its broader scope as the main Kconfig option for all
guest_memfd-backed memory. This provides clearer semantics for the
option and avoids confusion as new features are introduced.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use array_index_nospec() to sanitize the target vCPU ID when handling PV
IPIs and yields as the ID is guest-controlled.
- Drop a superfluous cpumask_empty() check when reclaiming SEV memory, as
the common case, by far, is that at least one CPU will have entered the
VM, and wbnoinvd_on_cpus_mask() will naturally handle the rare case where
the set of have_run_cpus is empty.
- Rename the is_signed_type() macro in kselftest_harness.h to is_signed_var()
to fix a collision with linux/overflow.h. The collision generates compiler
warnings due to the two macros having different implementations.
-----BEGIN PGP SIGNATURE-----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=8zIJ
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.17-rc7' of https://github.com/kvm-x86/linux into HEAD
* Use array_index_nospec() to sanitize the target vCPU ID when handling PV
IPIs and yields as the ID is guest-controlled.
* Drop a superfluous cpumask_empty() check when reclaiming SEV memory, as
the common case, by far, is that at least one CPU will have entered the
VM, and wbnoinvd_on_cpus_mask() will naturally handle the rare case where
the set of have_run_cpus is empty.
* Rename the is_signed_type() macro in kselftest_harness.h to is_signed_var()
to fix a collision with linux/overflow.h. The collision generates compiler
warnings due to the two macros having different implementations.
Machines can be shipped without any microcode in the BIOS. Which means,
the microcode patch revision is 0.
Handle that gracefully.
Fixes: 94838d230a ("x86/microcode/AMD: Use the family,model,stepping encoded in the patch ID")
Reported-by: Vítek Vávra <vit.vavra.kh@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
- Use array_index_nospec() to sanitize the target vCPU ID when handling PV
IPIs and yields as the ID is guest-controlled.
- Drop a superfluous cpumask_empty() check when reclaiming SEV memory, as
the common case, by far, is that at least one CPU will have entered the
VM, and wbnoinvd_on_cpus_mask() will naturally handle the rare case where
the set of have_run_cpus is empty.
- Rename the is_signed_type() macro in kselftest_harness.h to is_signed_var()
to fix a collision with linux/overflow.h. The collision generates compiler
warnings due to the two macros having different implementations.
-----BEGIN PGP SIGNATURE-----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=8zIJ
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.17-rc7' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes and a selftest fix for 6.17-rcN
- Use array_index_nospec() to sanitize the target vCPU ID when handling PV
IPIs and yields as the ID is guest-controlled.
- Drop a superfluous cpumask_empty() check when reclaiming SEV memory, as
the common case, by far, is that at least one CPU will have entered the
VM, and wbnoinvd_on_cpus_mask() will naturally handle the rare case where
the set of have_run_cpus is empty.
- Rename the is_signed_type() macro in kselftest_harness.h to is_signed_var()
to fix a collision with linux/overflow.h. The collision generates compiler
warnings due to the two macros having different implementations.
Starting with commit dd26c1a23f ("PCI: rcar-host: Switch to
msi_create_parent_irq_domain()"), the MSI parent IRQ domain is NULL because
the object of type struct irq_domain_info passed to:
msi_create_parent_irq_domain() ->
irq_domain_instantiate()() ->
__irq_domain_instantiate()
has no reference to the parent IRQ domain. Using msi->domain->parent as an
argument for generic_handle_domain_irq() leads to below error:
"Unable to handle kernel NULL pointer dereference at virtual address"
This error was identified while switching the upcoming RZ/G3S PCIe host
controller driver to msi_create_parent_irq_domain() (which was using a
similar pattern to handle MSIs (see link section)), but it was not tested
on hardware using the pcie-rcar-host controller driver due to lack of
hardware.
Fixes: dd26c1a23f ("PCI: rcar-host: Switch to msi_create_parent_irq_domain()")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/all/20250704161410.3931884-6-claudiu.beznea.uj@bp.renesas.com
Link: https://patch.msgid.link/20250809144447.3939284-1-claudiu.beznea.uj@bp.renesas.com
Move functions out of virt/virtchnl.c to virt/rss.c.
Same "git tricks" used as for the split into virt/queues.c
that is immediately preceding this split.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove remaining portion of the stuff that stays within virtchnl.c,
(separate commits to have nicer, removal-only, history).
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Start removing stuff from virt/rss.c that will be kept in the main
virtchnl file.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This effectively copies virtchnl.c as rss.c in a way that both files have
the same history of edits.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Add copy of virtchnl.c under the original name/location.
Now both virt/virtchnl.c and virt/rss.c have the same content,
and only the former of the two in use.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Temporary rename of virtchnl.c into rss.c
In order to split virtchnl.c in a way that makes it much easier
to still blame new file, we do it via multiple git steps.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move queue configuration functions out of virtchnl.c to queues.c.
Technically the move was started by an earlier commit of the series,
that was duplicating virtchnl.c as queues.c (what forces git to nicely
show blame when asked), followed by a couple of cleanup commits (that
removed stuff that is not moved from the new file, again - multiple
commits, to avoid git saving on changes lines by reusing removed lines
as a content of some kept function), with this final commit actually
enabling compilation of the new file, removing stuff from the virtchnl.c,
and making some moved functions visible (via static keyword removal).
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove final portion of the stuff that stays within virtchnl.c,
(separate commits to have nicer, removal-only, history).
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove next piece of the content that stays in virtchnl.c,
(separate commits to have nicer git history).
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Start removing stuff from virt/queues.c that will be kept in the
main virtchnl file.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This effectively copies virtchnl.c as queues.c in a way that both files
have the same history of edits.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Add copy of virtchnl.c under the original name/location.
Now both virt/virtchnl.c and virt/queues.c have the same content,
and only the former of the two is in use.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Temporary rename of virtchnl.c into queues.c
In order to split virtchnl.c in a way that makes it much easier
to still blame new file, we do it via multiple git steps.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
PSR work is using __psr_wait_for_idle_locked to ensure PSR exit is
completed before continuing to PSR activation. __psr_wait_for_idle_locked
is unlocking PSR mutex which allows PSR disable/enable and PSR
pause/resume while PSR idle is being wait. PSR enable status is already
checked after locking again PSR mutex but PSR pause counter check is
missing. Due to this PSR work may continue to PSR activation even PSR is
paused.
Fix this by checking PSR pause counter in __psr_wait_for_idle_locked after
PSR mutex is locked again.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jeevan B <jeevan.b@intel.com>
Link: https://lore.kernel.org/r/20250826074457.1992524-1-jouni.hogander@intel.com
This patch updates the KUnit docs to show how to use the new
parameterized test context to share resources between parameter runs.
It documents and show examples of different ways the test user can
pass parameter arrays to a parameterized test. Finally, it specifies the
parameterized testing terminology.
Link: https://lore.kernel.org/r/20250826091341.1427123-8-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce example_params_test_with_init_dynamic_arr(). This new
KUnit test demonstrates directly assigning a dynamic parameter
array, using the kunit_register_params_array() macro, to a
parameterized test context.
It highlights the use of param_init() and param_exit() for
initialization and exit of a parameterized test, and their
registration to the test case with KUNIT_CASE_PARAM_WITH_INIT().
Link: https://lore.kernel.org/r/20250826091341.1427123-7-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add example_params_test_with_init() to illustrate how to manage
shared resources across a parameterized KUnit test. This example
showcases the use of the new param_init() function and its registration
to a test using the KUNIT_CASE_PARAM_WITH_INIT() macro.
Additionally, the test demonstrates how to directly pass a parameter array
to the parameterized test context via kunit_register_params_array()
and leveraging the Resource API for shared resource management.
Link: https://lore.kernel.org/r/20250826091341.1427123-6-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit parameterized tests currently support two primary methods f
or getting parameters:
1. Defining custom logic within a generate_params() function.
2. Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC()
macros with a pre-defined static array and passing
the created *_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating parameters
sequentially via generate_params() is inefficient or overly complex.
This patch addresses these limitations by adding a new `params_array`
field to `struct kunit`, of the type `kunit_params`. The
`struct kunit_params` is designed to store the parameter array itself,
along with essential metadata including the parameter count, parameter
size, and a get_description() function for providing custom descriptions
for individual parameters.
The `params_array` field can be populated by calling the new
kunit_register_params_array() macro from within a param_init() function.
This will register the array as part of the parameterized test context.
The user will then need to pass kunit_array_gen_params() to the
KUNIT_CASE_PARAM_WITH_INIT() macro as the generator function, if not
providing their own. kunit_array_gen_params() is a KUnit helper that will
use the registered array to generate parameters.
The arrays passed to KUNIT_ARRAY_PARAM(,DESC) will also be registered to
the parameterized test context for consistency as well as for higher
availability of the parameter count that will be used for outputting a KTAP
test plan for a parameterized test.
This modification provides greater flexibility to the KUnit framework,
allowing testers to easily register and utilize both dynamic and static
parameter arrays.
Link: https://lore.kernel.org/r/20250826091341.1427123-5-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
[Only output the test plan if using kunit_array_gen_params --David]
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To enable more complex parameterized testing scenarios, the
generate_params() function needs additional context beyond just
the previously generated parameter. This patch modifies the
generate_params() function signature to include an extra
`struct kunit *test` argument, giving test users access to the
parameterized test context when generating parameters.
The `struct kunit *test` argument was added as the first parameter
to the function signature as it aligns with the convention of other
KUnit functions that accept `struct kunit *test` first. This also
mirrors the "this" or "self" reference found in object-oriented
programming languages.
This patch also modifies xe_pci_live_device_gen_param() in xe_pci.c
and nthreads_gen_params() in kcsan_test.c to reflect this signature
change.
Link: https://lore.kernel.org/r/20250826091341.1427123-4-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
[Catch some additional gen_params signatures in drm/xe/tests --David]
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add (*param_init) and (*param_exit) function pointers to
`struct kunit_case`. Users will be able to set them via the new
KUNIT_CASE_PARAM_WITH_INIT() macro.
param_init/exit will be invoked by kunit_run_tests() once before and once
after the parameterized test, respectively. They will receive the
`struct kunit` that holds the parameterized test context; facilitating
init and exit for shared state.
This patch also sets param_init/exit to None in rust/kernel/kunit.rs.
Link: https://lore.kernel.org/r/20250826091341.1427123-3-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, KUnit parameterized tests lack a mechanism to share
resources across parameter runs because the same `struct kunit`
instance is cleaned up and reused for each run.
This patch introduces parameterized test context, enabling test
users to share resources between parameter runs. It also allows
setting up resources that need to be available for all parameter
runs only once, which is helpful in cases where setup is expensive.
To establish a parameterized test context, this patch adds a
parent pointer field to `struct kunit`. This allows resources added
to the parent `struct kunit` to be shared and accessible across all
parameter runs.
In kunit_run_tests(), the default `struct kunit` created is now
designated to act as the parameterized test context whenever a test
is parameterized.
Subsequently, a new `struct kunit` is made for each parameter run, and
its parent pointer is set to the `struct kunit` that holds the
parameterized test context.
Link: https://lore.kernel.org/r/20250826091341.1427123-2-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
I can never remember whether --raw_output takes 'all' or 'full'. No
reason we can't support both.
For the record, 'all' is the recommended, documented option.
Link: https://lore.kernel.org/r/20250730031624.1911689-1-davidgow@google.com
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The hv_netvsc driver currently enables NAPI after opening the primary and
subchannels. This ordering creates a race: if the Hyper-V host places data
in the host -> guest ring buffer and signals the channel before
napi_enable() has been called, the channel callback will run but
napi_schedule_prep() will return false. As a result, the NAPI poller never
gets scheduled, the data in the ring buffer is not consumed, and the
receive queue may remain permanently stuck until another interrupt happens
to arrive.
Fix this by enabling NAPI and registering it with the RX/TX queues before
vmbus channel is opened. This guarantees that any early host signal after
open will correctly trigger NAPI scheduling and the ring buffer will be
drained.
Fixes: 76bb5db5c7 ("netvsc: fix use after free on module removal")
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20250825115627.GA32189@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in the AF_XDP transmit paths, the CIC bit of
TX Desc3 is set for all packets. Setting this bit for
packets transmitting through queues that don't support
checksum offloading causes the TX DMA to get stuck after
transmitting some packets. This patch ensures the CIC bit
of TX Desc3 is set only if the TX queue supports checksum
offloading.
Fixes: 132c32ee5b ("net: stmmac: Add TX via XDP zero-copy socket")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-3-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct supported speed modes as per the XGMAC databook.
Commit 9cb54af214 ("net: stmmac: Fix IP-cores specific
MAC capabilities") removes support for 10M, 100M and
1000HD. 1000HD is not supported by XGMAC IP, but it does
support 10M and 100M FD mode for XGMAC version >= 2_20,
and it also supports 10M and 100M HD mode if the HDSEL bit
is set in the MAC_HW_FEATURE0 reg. This commit enables support
for 10M and 100M speed modes for XGMAC IP based on XGMAC
version and MAC capabilities.
Fixes: 9cb54af214 ("net: stmmac: Fix IP-cores specific MAC capabilities")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-2-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enabling RX FIFO Overflow interrupts is counterproductive
and causes an interrupt storm when RX FIFO overflows.
Disabling this interrupt has no side effect and eliminates
interrupt storms when the RX FIFO overflows.
Commit 8a7cb245cf ("net: stmmac: Do not enable RX FIFO
overflow interrupts") disables RX FIFO overflow interrupts
for DWMAC4 IP and removes the corresponding handling of
this interrupt. This patch is doing the same thing for
XGMAC IP.
Fixes: 2142754f8b ("net: stmmac: Add MAC related callbacks for XGMAC2")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-1-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Biggers says:
====================
ipv6: sr: Simplify and optimize HMAC calculations
This series simplifies and optimizes the HMAC calculations in
IPv6 Segment Routing.
====================
Link: https://patch.msgid.link/20250824013644.71928-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare the HMAC key when it is added to the kernel, instead of
preparing it implicitly for every packet. This significantly improves
the performance of seg6_hmac_compute(). A microbenchmark on x86_64
shows seg6_hmac_compute() (with HMAC-SHA256) dropping from ~1978 cycles
to ~1419 cycles, a 28% improvement.
The size of 'struct seg6_hmac_info' increases by 128 bytes, but that
should be fine, since there should not be a massive number of keys.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20250824013644.71928-3-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the HMAC-SHA1 and HMAC-SHA256 library functions instead of
crypto_shash. This is simpler and faster. Pre-allocating per-CPU hash
transformation objects and descriptors is no longer needed, and a
microbenchmark on x86_64 shows seg6_hmac_compute() (with HMAC-SHA256)
dropping from ~2494 cycles to ~1978 cycles, a 20% improvement.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20250824013644.71928-2-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The local Xoff value is being set before the firmware (FW) update.
In case of a failure where the FW is not updated with the new value,
there is no fallback to the previous value.
Update the local Xoff value after the FW has been successfully set.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-12-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xon/Xoff sizes are derived from calculations that include
the port speed.
These settings need to be updated and applied whenever the
port speed is changed.
The port speed is typically set after the physical link goes down
and is negotiated as part of the link-up process between the two
connected interfaces.
Xon/Xoff parameters being updated at the point where the new
negotiated speed is established.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-11-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xon/Xoff sizes are derived from calculation that include the MTU size.
Set Xon/Xoff when MTU is set.
If Xon/Xoff fails, set the previous MTU.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-10-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changing flow steering modes is not allowed when eswitch is in switchdev
mode. This fix ensures that any steering mode change, including to
firmware steering, is correctly blocked while eswitch mode is switchdev.
Fixes: e890acd5ff ("net/mlx5: Add devlink flow_steering_mode parameter")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
