When the CPU is offline, the timer of LoongArch is not correctly closed.
This is harmless for real machines, but resulting in an excessively high
cpu usage rate of the offline vCPU thread in the virtual machines.
To correctly close the timer, we have made the following modifications:
Register the cpu hotplug event (CPUHP_AP_LOONGARCH_ARCH_TIMER_STARTING)
for LoongArch. This event's hooks will be called to close the timer when
the CPU is offline.
Clear the timer interrupt when the timer is turned off. Since before the
timer is turned off, there may be a timer interrupt that has already been
in the pending state due to the interruption of the disabled, which also
affects the halt state of the offline vCPU.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The default COMMAND_LINE_SIZE of 512, inherited from asm-generic, is
too small for modern use cases. For example, kdump configurations or
extensive debugging parameters can easily exceed this limit.
Therefore, increase the command line size to 4096 bytes, aligning
LoongArch with the MIPS architecture. This change follows a broader
trend among architectures to raise this limit to support modern needs;
for instance, PowerPC increased its value for similar reasons in the
commit a5980d064f ("powerpc: Bump COMMAND_LINE_SIZE to 2048").
Similar to the change made for RISC-V in the commit 61fc1ee8be
("riscv: Bump COMMAND_LINE_SIZE value to 1024"), this is considered
a safe change. The broader kernel community has reached a consensus
that modifying COMMAND_LINE_SIZE from UAPI headers does not constitute
a uABI breakage, as well-behaved userspace applications should not
rely on this macro.
Suggested-by: Huang Cun <cunhuang@tencent.com>
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When compiling with LLVM and CONFIG_LTO_CLANG is set, there exist many
objtool warnings "sibling call from callable instruction with modified
stack frame".
For this special case, the related object file shows that there is no
generated relocation section '.rela.discard.tablejump_annotate' for the
table jump instruction jirl, thus objtool can not know that what is the
actual destination address.
It needs to do something on the LLVM side to make sure that there is the
relocation section '.rela.discard.tablejump_annotate' if LTO is enabled,
but in order to maintain compatibility for the current LLVM compiler,
this can be done in the kernel Makefile for now. Ensure it is aware of
linker with LTO, '--loongarch-annotate-tablejump' needs to be passed via
'-mllvm' to ld.lld.
Note that it should also pass the compiler option -mannotate-tablejump
rather than only pass '-mllvm --loongarch-annotate-tablejump' to ld.lld
if LTO is enabled, otherwise there are no jump info for some table jump
instructions.
Fixes: e20ab7d454 ("LoongArch: Enable jump table for objtool")
Closes: https://lore.kernel.org/loongarch/20250731175655.GA1455142@ax162/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Co-developed-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When compiling with LLVM and CONFIG_LTO_CLANG is set, there exist many
objtool warnings "sibling call from callable instruction with modified
stack frame".
For this special case, the related object file shows that there is no
generated relocation section '.rela.discard.tablejump_annotate' for the
table jump instruction jirl, thus objtool can not know that what is the
actual destination address.
It needs to do something on the LLVM side to make sure that there is the
relocation section '.rela.discard.tablejump_annotate' if LTO is enabled,
but in order to maintain compatibility for the current LLVM compiler,
this can be done in the kernel Makefile for now. Ensure it is aware of
linker with LTO, '--loongarch-annotate-tablejump' needs to be passed via
'-mllvm' to ld.lld.
Before doing the above changes, it should handle the special case of the
relocation section '.rela.discard.tablejump_annotate' to get the correct
table size first, otherwise there are many objtool warnings and errors
if LTO is enabled.
There are many different rodata for each function if LTO is enabled, it
is necessary to enhance get_rodata_table_size_by_table_annotate().
Fixes: b95f852d3a ("objtool/LoongArch: Add support for switch table")
Closes: https://lore.kernel.org/loongarch/20250731175655.GA1455142@ax162/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Convert the legacy TXT binding for the OMAP TWL4030 sound card
to the modern YAML DT schema format. This adds formal validation
and improves documentation.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250819201302.80712-3-jihed.chaibi.dev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the TWL4030 audio module bindings from txt to YAML format and
move them to the sound subsystem bindings directory. This patch also
refines the schema by adding an enum constraint for ti,enable-vibra and
updates the example to remove irrelevant I2C clock-frequency property.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250819201302.80712-2-jihed.chaibi.dev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_kcalloc() in test_driver_probe() to gain built-in overflow
protection, making memory allocation safer when calculating allocation
size compared to explicit multiplication.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://patch.msgid.link/20250820123423.470486-4-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_kcalloc() in fsl_sai_read_dlcfg() and imx_audmux_probe() to gain
built-in overflow protection, making memory allocation safer when
calculating allocation size compared to explicit multiplication.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://patch.msgid.link/20250820123423.470486-3-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_kcalloc() in fs_parse_scene_tables() and pcmdev_gain_ctrl_add()
to gain built-in overflow protection, making memory allocation safer when
calculating allocation size compared to explicit multiplication.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://patch.msgid.link/20250820123423.470486-2-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kernel is not supported to run as a Xen guest on Xen versions
older than 4.0.
Remove xen_strict_xenbus_quirk() which is testing the Xen version to be
at least 4.0.
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250815074052.13792-1-jgross@suse.com>
Replace the manual bitwise conversion of bytes to MB with
SZ_1M macro, a standard macro used within the mm subsystem,
to improve readability.
Signed-off-by: Pratyush Brahma <pratyush.brahma@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250820-numa-memblks-refac-v2-1-43bf1af02acd@oss.qualcomm.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
The security-version-number check should be used rather
than the runtime version check for driver updates.
Otherwise, the firmware update would fail when the update binary had
a lower runtime version number than the current one.
Fixes: 0db89fa243 ("ACPI: Introduce Platform Firmware Runtime Update device driver")
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Reported-by: "Govindarajulu, Hariganesh" <hariganesh.govindarajulu@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/20250722143233.3970607-1-yu.c.chen@intel.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This warning was triggered during testing on v6.16:
notifier callback ftrace_suspend_notifier_call already registered
WARNING: CPU: 2 PID: 86 at kernel/notifier.c:23 notifier_chain_register+0x44/0xb0
...
Call Trace:
<TASK>
blocking_notifier_chain_register+0x34/0x60
register_ftrace_graph+0x330/0x410
ftrace_profile_write+0x1e9/0x340
vfs_write+0xf8/0x420
? filp_flush+0x8a/0xa0
? filp_close+0x1f/0x30
? do_dup2+0xaf/0x160
ksys_write+0x65/0xe0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
When writing to the function_profile_enabled interface, the notifier was
not unregistered after start_graph_tracing failed, causing a warning the
next time function_profile_enabled was written.
Fixed by adding unregister_pm_notifier in the exception path.
Link: https://lore.kernel.org/20250818073332.3890629-1-yeweihua4@huawei.com
Fixes: 4a2b8dda3f ("tracing/function-graph-tracer: fix a regression while suspend to disk")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ye Weihua <yeweihua4@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the length of the string written to set_ftrace_filter exceeds
FTRACE_BUFF_MAX, the following KASAN alarm will be triggered:
BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0
Read of size 1 at addr ffff0000d00bd5ba by task ash/165
CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty
Hardware name: linux,dummy-virt (DT)
Call trace:
show_stack+0x34/0x50 (C)
dump_stack_lvl+0xa0/0x158
print_address_description.constprop.0+0x88/0x398
print_report+0xb0/0x280
kasan_report+0xa4/0xf0
__asan_report_load1_noabort+0x20/0x30
strsep+0x18c/0x1b0
ftrace_process_regex.isra.0+0x100/0x2d8
ftrace_regex_release+0x484/0x618
__fput+0x364/0xa58
____fput+0x28/0x40
task_work_run+0x154/0x278
do_notify_resume+0x1f0/0x220
el0_svc+0xec/0xf0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
The reason is that trace_get_user will fail when processing a string
longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0.
Then an OOB access will be triggered in ftrace_regex_release->
ftrace_process_regex->strsep->strpbrk. We can solve this problem by
limiting access to parser->buffer when trace_get_user failed.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250813040232.1344527-1-pulehui@huaweicloud.com
Fixes: 8c9af478c0 ("ftrace: Handle commands when closing set_ftrace_filter file")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add missing LIBBPF_API macro for bpf_object__prepare function to enable
its export. libbpf.map had bpf_object__prepare already listed.
Fixes: 1315c28ed8 ("libbpf: Split bpf object load into prepare/load")
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250819215119.37795-1-mykyta.yatsenko5@gmail.com
After the V!=R rework (commit c98d2ecae0 ("s390/mm: Uncouple physical
vs virtual address spaces")), all kernel code and related data are
allocated within a 4G region, making it possible to use relative
addressing in BPF code more extensively.
Convert as many indirect calls and jumps to direct calls as possible,
namely:
* BPF_CALL
* __bpf_tramp_enter()
* __bpf_tramp_exit()
* __bpf_prog_enter()
* __bpf_prog_exit()
* fentry
* fmod_ret
* fexit
* BPF_TRAMP_F_CALL_ORIG without BPF_TRAMP_F_ORIG_STACK
* Trampoline returns without BPF_TRAMP_F_SKIP_FRAME and
BPF_TRAMP_F_ORIG_STACK
The following indirect calls and jumps remain:
* Prog returns
* Trampoline returns with BPF_TRAMP_F_SKIP_FRAME or
BPF_TRAMP_F_ORIG_STACK
* BPF_TAIL_CALL
* BPF_TRAMP_F_CALL_ORIG with BPF_TRAMP_F_ORIG_STACK
As a result, only one usage of call_r1() remains, so inline it.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250819102116.252203-1-iii@linux.ibm.com
nft_pipapo_scratch is a per-CPU variable and relies on disabled BH for
its locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Add a local_lock_t to the data structure and use local_lock_nested_bh() for
locking. This change adds only lockdep coverage and does not alter the
functional behaviour for !PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
The struct nft_pipapo_scratch is allocated, then aligned to the required
alignment and difference (in bytes) is then saved in align_off. The
aligned pointer is used later.
While this works, it gets complicated with all the extra checks if
all member before map are larger than the required alignment.
Instead of saving the aligned pointer, just save the returned pointer
and align the map pointer in nft_pipapo_lookup() before using it. The
alignment later on shouldn't be that expensive. With this change, the
align_off can be removed and the pointer can be passed to kfree() as is.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Always prefer the avx2 implementation if its available.
This greatly improves insertion performance (each insertion
checks if the new element would overlap with an existing one):
time nft -f - <<EOF
table ip pipapo {
set s {
typeof ip saddr . tcp dport
flags interval
size 800000
elements = { 10.1.1.1 - 10.1.1.4 . 3996,
[.. 800k entries elided .. ]
before:
real 1m55.993s
user 0m2.505s
sys 1m53.296s
after:
real 0m42.586s
user 0m2.554s
sys 0m39.811s
Fold patch from Sebastian:
kernel_fpu_begin_mask()/ _end() remains in pipapo_get_avx2() where it is
required.
A followup patch will add local_lock_t to struct nft_pipapo_scratch in
order to protect the map pointer. The lock can not be acquired in
preemption disabled context which is what kernel_fpu_begin*() does.
Link: https://lore.kernel.org/netfilter-devel/20250818110213.1319982-2-bigeasy@linutronix.de/
Co-developed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Split the main avx2 lookup function into a helper.
This is a preparation patch: followup change will use the new helper
from the insertion path if possible. This greatly improves insertion
performance when avx2 is supported.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
The comment claims that the kernel_fpu_begin_mask() below protects
access to the scratch map. This is not true because the access is only
protected by local_bh_disable() above.
Remove the misleading comment.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
There is no need to keep the object alive via refcount, use a cookie and
then use that as the skip hint for dump resumption.
Unlike the two earlier, similar patches in this file, this is a cleanup
without intended side effects.
Signed-off-by: Florian Westphal <fw@strlen.de>
Include <linux/property.h> to declare device_property_read_bool() and
<linux/mod_devicetable.h> to declare struct of_device_id. Avoids the
dependency on the backlight header to include both.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250812082509.227879-1-tzimmermann@suse.de
Christoph Hellwig <hch@lst.de> says:
Hi all,
while trying to add XFS support for passing through metadata I ran
into a few issues with how that support is wire up for the current
block device use cases, and this fixes it.
* patches from https://lore.kernel.org/20250819082517.2038819-1-hch@lst.de:
block: don't silently ignore metadata for sync read/write
fs: add a FMODE_ flag to indicate IOCB_HAS_METADATA availability
Link: https://lore.kernel.org/20250819082517.2038819-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
The block fops don't try to handle metadata for synchronous requests,
probably because the completion handler looks at dio->iocb which is not
valid for synchronous requests.
But silently ignoring metadata (or warning in case of
__blkdev_direct_IO_simple) is a really bad idea as that can cause
silent data corruption if a user ever shows up.
Instead simply handle metadata for synchronous requests as the completion
handler can simply check for bio_integrity() as the block layer default
integrity will already be freed at this point, and thus bio_integrity()
will only return true for user mapped integrity.
Fixes: 3d8b5a22d4 ("block: add support to pass user meta buffer")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250819082517.2038819-3-hch@lst.de
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently the kernel will happily route io_uring requests with metadata
to file operations that don't support it. Add a FMODE_ flag to guard
that.
Fixes: 4de2ce04c8 ("fs: introduce IOCB_HAS_METADATA for metadata")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250819082517.2038819-2-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Usual mixed bunch of ancient issues and relatively new ones.
adi,ad7124
- Fix channel lookup to use chan->address for indexing array.
adi,ad7173
- Stop accidentally enabling more configs than supported at one time.
adi,ad7380
- Fill in missing max_conversion_rate_hz for adaq4381-4
ams,as73211
- Fix uninitialized holes in scan data exposed to userspace.
bosch,bmp280
- Check for error when requesting optional GPIO rather than simply assuming
success or a NULL return when no GPIO provided.
invensense,icm42600
- Change error code returned to -EBUSY on a temperature read with neither
accelerometer nor gyroscope in use. Reduces chance of misinterpretation
by userspace.
kionix,sca3300
- Fix uninitialized holes in scan data exposed to userspace.
maxim,thermocouple
- Use a DMA-safe buffer for spi_read().
renesas,isl29501
- Fix ordering issue for big endian systems
renesas,rsg2l
- Fix an underflow issue around suspend/resume.
- Make sure driver data is in place before enabling runtime PM that uses
it.
rohm,bd79124
- Add missing GPIOLIB dependency. May rework in future to allow this to be
optional in future but for now this is the least invasive build fix.
-----BEGIN PGP SIGNATURE-----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=QGkA
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.17a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for 6.17
Usual mixed bunch of ancient issues and relatively new ones.
adi,ad7124
- Fix channel lookup to use chan->address for indexing array.
adi,ad7173
- Stop accidentally enabling more configs than supported at one time.
adi,ad7380
- Fill in missing max_conversion_rate_hz for adaq4381-4
ams,as73211
- Fix uninitialized holes in scan data exposed to userspace.
bosch,bmp280
- Check for error when requesting optional GPIO rather than simply assuming
success or a NULL return when no GPIO provided.
invensense,icm42600
- Change error code returned to -EBUSY on a temperature read with neither
accelerometer nor gyroscope in use. Reduces chance of misinterpretation
by userspace.
kionix,sca3300
- Fix uninitialized holes in scan data exposed to userspace.
maxim,thermocouple
- Use a DMA-safe buffer for spi_read().
renesas,isl29501
- Fix ordering issue for big endian systems
renesas,rsg2l
- Fix an underflow issue around suspend/resume.
- Make sure driver data is in place before enabling runtime PM that uses
it.
rohm,bd79124
- Add missing GPIOLIB dependency. May rework in future to allow this to be
optional in future but for now this is the least invasive build fix.
* tag 'iio-fixes-for-6.17a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe()
iio: light: as73211: Ensure buffer holes are zeroed
iio: adc: rzg2l_adc: Set driver data before enabling runtime PM
iio: adc: rzg2l: Cleanup suspend/resume path
iio: adc: ad7380: fix missing max_conversion_rate_hz on adaq4381-4
iio: adc: bd79124: Add GPIOLIB dependency
iio: imu: inv_icm42600: change invalid data error to -EBUSY
iio: adc: ad7124: fix channel lookup in syscalib functions
iio: temperature: maxim_thermocouple: use DMA-safe buffer for spi_read()
iio: adc: ad7173: prevent scan if too many setups requested
iio: proximity: isl29501: fix buffered read on big-endian systems
iio: accel: sca3300: fix uninitialized iio scan data
Add support for TI K3 AM62D2 SoC to read speed and revision values
from hardware and pass to OPP layer. AM62D shares the same configuations
as AM62A so use existing am62a7_soc_data.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add ti,am62d2 SoC to the blacklist as the ti-cpufreq driver will handle
creating the cpufreq-dt platform device after it completes and ensure
it is not created twice.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fix shellcheck warning such as
"Double quote to prevent globbing and word splitting." and
Use $(...) notation instead of legacy backticks `...`.
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250518044107.39928-4-maddy@linux.ibm.com
When compiling for pseries or powernv defconfig with "make C=1",
these warning were reported bu sparse tool in powerpc/kernel/kvm.c
arch/powerpc/kernel/kvm.c:635:9: warning: switch with no cases
arch/powerpc/kernel/kvm.c:646:9: warning: switch with no cases
Currently #ifdef were added after the switch case which are specific
for BOOKE and PPC_BOOK3S_32. These are not enabled in pseries/powernv
defconfig. Fix it by moving the #ifdef before switch(){}
Fixes: cbe487fac7 ("KVM: PPC: Add mtsrin PV code")
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250518044107.39928-1-maddy@linux.ibm.com
There are two CONFIG_POWERPC64_CPU entries in the "CPU selection"
choice block.
I guess the intent is to display a different prompt depending on
CPU_LITTLE_ENDIAN: "Generic (POWER5 and PowerPC 970 and above)" for big
endian, and "Generic (POWER8 and above)" for little endian.
I stumbled on this tricky use case, and worked around it on Kconfig with
commit 4d46b5b623 ("kconfig: fix infinite loop in sym_calc_choice()").
However, I doubt that supporting multiple entries with the same symbol
in a choice block is worth the complexity - this is the only such case
in the kernel tree.
This commit merges the two entries. Once this cleanup is accepted in
the powerpc subsystem, I will proceed to refactor the Kconfig parser.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250607102005.1965409-1-masahiroy@kernel.org
The extra-y syntax is planned for deprecation because it is similar
to always-y.
When building the boot wrapper, always-y and extra-y are equivalent.
Use always-y instead.
In arch/powerpc/kernel/Makefile, I added ifdef KBUILD_BUILTIN to
keep the current behavior: prom_init_check is skipped when building
only modular objects.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250602163302.478765-1-masahiroy@kernel.org
Until commit 6c85f52b10 ("kvm/ppc: IRQ disabling cleanup"),
kvmppc_prepare_to_enter() was called with interrupts already disabled by
the caller, which was documented in the comment above the function.
Post-cleanup, the function is now called with interrupts enabled, and
disables interrupts itself.
Fix the comment to reflect the current behaviour.
Fixes: 6c85f52b10 ("kvm/ppc: IRQ disabling cleanup")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Reviewed-by: Gautam Menghani <gautam@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
[Fixed the double colon in Reviewed-by line]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250806055607.17081-1-ajd@linux.ibm.com
This driver implements both the determine_rate() and round_rate() clk
ops, and the round_rate() clk ops is deprecated. When both are defined,
clk_core_determine_round_nolock() from the clk core will only use the
determine_rate() clk ops, so let's remove the round_rate() clk ops since
it's unused.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250811-clk-for-stephen-round-rate-v1-93-b3bf97b038dc@redhat.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250811-clk-for-stephen-round-rate-v1-92-b3bf97b038dc@redhat.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use tabs instead of spaces in the CRU clock descriptions to match the
formatting used in the rest of the clock definitions.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250806092129.621194-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add MSTOP configuration for all the module clocks on the RZ/G2UL
based SoCs (RZ/G2UL, RZ/Five).
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250806092129.621194-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add MSTOP configuration for all the module clocks on the RZ/G2L
based SoCs (RZ/G2L, RZ/G2LC, RZ/V2L).
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250806092129.621194-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The GPIO module also supports MSTOP. Add it in the description of the gpio
clock.
Fixes: c496959527 ("clk: renesas: r9a08g045: Drop power domain instantiation")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250806092129.621194-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
USB_CLK Clock and Pin Control DT binding definitions for the Renesas
RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs, shared by driver and DT
source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaJn0uQAKCRCKwlD9ZEnx
cP16AP9bhBcnWHfForGpSJAfuceMJY5en2uoU07Qmb2PGMdf0AD8DLhHVwW11UVN
VGlRLKMPZ8MDuVQzDUomawY1gZbiNgc=
=EVIx
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a09g077-dt-binding-defs-tag3' into renesas-clk-for-v6.18
Renesas RZ/T2H and RZ/N2H USB_CLK and Pin Control DT Binding Definitions
USB_CLK Clock and Pin Control DT binding definitions for the Renesas
RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs, shared by driver and DT
source files.
