Warning when the build_id data would be overflowed would lead to
memory corruption, switch to truncation.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Later clean up of the dso_id to include a build_id will suffer from
alignment and size issues. The size can only hold up to a value of
BUILD_ID_SIZE (20) and the mmap2 event uses a byte for the value.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250724163302.596743-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Thresholds can increase the number of counters a metric needs. The NMI
watchdog can take away a counter (hopefully the buddy watchdog will
become the default and this will no longer be true). Add a new
constraint for the case that a metric and its thresholds would fit in
counters but only if the NMI watchdog isn't enabled. Either the
threshold or the NMI watchdog should be disabled to make the metric
fit. Wire this up into the metric__group_events logic.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250719030517.1990983-16-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Topdown metric events require grouping with a slots event. In perf
metrics this is currently achieved by metrics adding an unnecessary
"0 * tma_info_thread_slots". New TMA metrics trigger optimizations of
the metric expression that removes the event and breaks the metric due
to the missing but required event. Add a pass immediately before
sorting and fixing parsed events, that insert a slots event if one is
missing. Update test expectations to match this.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250719030517.1990983-15-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The string comparisons were overly broad and could fire for the
incorrect PMU and events. Switch to using the config in the attribute
then add a perf test to confirm the attribute config values match
those of parsed events of that name and don't match others. This
exposed matches for slots events that shouldn't have matched as the
slots fixed counter event, such as topdown.slots_p.
Fixes: fbc798316b ("perf x86/topdown: Refine helper arch_is_topdown_metrics()")
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250719030517.1990983-14-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Counting events system-wide with a specified CPU prior to this change
worked:
```
$ perf stat -e 'msr/tsc/,msr/tsc,cpu=cpu_core/,msr/tsc,cpu=cpu_atom/' -a sleep 1
Performance counter stats for 'system wide':
59,393,419,099 msr/tsc/
33,927,965,927 msr/tsc,cpu=cpu_core/
25,465,608,044 msr/tsc,cpu=cpu_atom/
```
However, when counting with process the counts became system wide:
```
$ perf stat -e 'msr/tsc/,msr/tsc,cpu=cpu_core/,msr/tsc,cpu=cpu_atom/' perf test -F 10
10.1: Basic parsing test : Ok
10.2: Parsing without PMU name : Ok
10.3: Parsing with PMU name : Ok
Performance counter stats for 'perf test -F 10':
59,233,549 msr/tsc/
59,227,556 msr/tsc,cpu=cpu_core/
59,224,053 msr/tsc,cpu=cpu_atom/
```
Make the handling of CPU maps with event parsing clearer. When an
event is parsed creating an evsel the cpus should be either the PMU's
cpumask or user specified CPUs.
Update perf_evlist__propagate_maps so that it doesn't clobber the user
specified CPUs. Try to make the behavior clearer, firstly fix up
missing cpumasks. Next, perform sanity checks and adjustments from the
global evlist CPU requests and for the PMU including simplifying to
the "any CPU"(-1) value. Finally remove the event if the cpumask is
empty.
So that events are opened with a CPU and a thread change stat's
create_perf_stat_counter to give both.
With the change things are fixed:
```
$ perf stat --no-scale -e 'msr/tsc/,msr/tsc,cpu=cpu_core/,msr/tsc,cpu=cpu_atom/' perf test -F 10
10.1: Basic parsing test : Ok
10.2: Parsing without PMU name : Ok
10.3: Parsing with PMU name : Ok
Performance counter stats for 'perf test -F 10':
63,704,975 msr/tsc/
47,060,704 msr/tsc,cpu=cpu_core/ (4.62%)
16,640,591 msr/tsc,cpu=cpu_atom/ (2.18%)
```
However, note the "--no-scale" option is used. This is necessary as
the running time for the event on the counter isn't the same as the
enabled time because the thread doesn't necessarily run on the CPUs
specified for the counter. All counter values are scaled with:
scaled_value = value * time_enabled / time_running
and so without --no-scale the scaled_value becomes very large. This
problem already exists on hybrid systems for the same reason. Here are
2 runs of the same code with an instructions event that counts the
same on both types of core, there is no real multiplexing happening on
the event:
```
$ perf stat -e instructions perf test -F 10
...
Performance counter stats for 'perf test -F 10':
87,896,447 cpu_atom/instructions/ (14.37%)
98,171,964 cpu_core/instructions/ (85.63%)
...
$ perf stat --no-scale -e instructions perf test -F 10
...
Performance counter stats for 'perf test -F 10':
13,069,890 cpu_atom/instructions/ (19.32%)
83,460,274 cpu_core/instructions/ (80.68%)
...
```
The scaling has inflated per-PMU instruction counts and the overall
count by 2x.
To fix this the kernel needs changing when a task+CPU event (or just
task event on hybrid) is scheduled out. A fix could be that the state
isn't inactive but off for such events, so that time_enabled counts
don't accumulate on them.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250719030517.1990983-13-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add evsel__open_per_cpu_and_thread that combines the operation of
evsel__open_per_cpu and evsel__open_per_thread so that an event
without the "any" cpumask can be opened with its cpumask and with
threads it specifies. Change the implementation of evsel__open_per_cpu
and evsel__open_per_thread to use evsel__open_per_cpu_and_thread to
make the implementation of those functions clearer.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-12-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Rename cpu_list to user_cpus. If a PMU isn't given, find it early from
the perf_event_attr. Make the pmu_cpus more explicitly a copy from the
PMU (except when user_cpus are given). Derive the cpus from pmu_cpus
and user_cpus as appropriate. Handle strdup errors on name and
metric_id.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-11-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Allow a PMU to be found by a perf_event_attr, useful when creating
evsels.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Avoid the duplicated code and better enable perf_evsel to change.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This allows the perf_evsel__exit to be called when the struct
perf_evsel is embedded inside another struct, such as struct evsel in
perf.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
own_cpus is generally the cpumask from the PMU. Rename to pmu_cpus to
try to make this clearer. Variable rename with no other changes.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
For hybrid metrics it is useful to know the number of p-core or e-core
CPUs. If a cpumask is specified for the num_cpus or num_cpus_online
tool events, compute the value relative to the given mask rather than
for the full system.
```
$ sudo /tmp/perf/perf stat -e 'tool/num_cpus/,tool/num_cpus,cpu=cpu_core/,
tool/num_cpus,cpu=cpu_atom/,tool/num_cpus_online/,tool/num_cpus_online,
cpu=cpu_core/,tool/num_cpus_online,cpu=cpu_atom/' true
Performance counter stats for 'true':
28 tool/num_cpus/
16 tool/num_cpus,cpu=cpu_core/
12 tool/num_cpus,cpu=cpu_atom/
28 tool/num_cpus_online/
16 tool/num_cpus_online,cpu=cpu_core/
12 tool/num_cpus_online,cpu=cpu_atom/
0.000767205 seconds time elapsed
0.000938000 seconds user
0.000000000 seconds sys
```
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
On hybrid systems, events like msr/tsc/ will aggregate counts across
all CPUs. Often metrics only want a value like msr/tsc/ for the cores
on which the metric is being computed. Listing each CPU with terms
cpu=0,cpu=1.. is laborious and would need to be encoded for all
variations of a CPU model.
Allow the cpumask from a PMU to be an argument to the cpu term. For
example in the following the cpumask of the cstate_pkg PMU selects the
CPUs to count msr/tsc/ counter upon:
```
$ cat /sys/bus/event_source/devices/cstate_pkg/cpumask
0
$ perf stat -A -e 'msr/tsc,cpu=cstate_pkg/' -a sleep 0.1
Performance counter stats for 'system wide':
CPU0 252,621,253 msr/tsc,cpu=cstate_pkg/
0.101184092 seconds time elapsed
```
As the cpu term is now also allowed to be a string, allow it to encode
a range of CPUs (a list can't be supported as ',' is already a special
token).
The "event qualifiers" section of the `perf list` man page is updated
to detail the additional behavior. The man page formatting is tidied
up in this section, as it was incorrectly appearing within the
"parameterized events" section.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250719030517.1990983-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
As evsels may have additional CPU terms, the user_requested_cpus may
not reflect all the CPUs requested. Use evlist->all_cpus to size the
array as that reflects all the CPUs potentially needed by the evlist.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
CPUs may be created and passed to perf_stat__get_aggr (via
config->aggr_get_id), such as in the stat display
should_skip_zero_counter. There may be no such aggr_id, for example,
if running with a thread. Add a missing bound check and just create
IDs for these cases.
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Factor requested CPU warning out of evlist and into evsel. At the end
of adding an event, perform the warning check. To avoid repeatedly
testing if the cpu_list is empty, add a local variable.
```
$ perf stat -e cpu_atom/cycles,cpu=1/ -a true
WARNING: A requested CPU in '1' is not supported by PMU 'cpu_atom' (CPUs 16-27) for event 'cpu_atom/cycles/'
Performance counter stats for 'system wide':
<not supported> cpu_atom/cycles/
0.000781511 seconds time elapsed
```
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250719030517.1990983-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Force loading all PMUs adds significant cost because DRM and other
PMUs are loaded, it should also not be required if the pmus__
functions are used.
Tested by run perf test, in particular the pfm related tests. Also
`perf list` is identical before and after.
Before:
$ time ./perf test pfm
54: Test libpfm4 support :
54.1: test of individual --pfm-events : Ok
54.2: test groups of --pfm-events : Ok
103: perf all libpfm4 events test : Ok
real 0m8.933s
user 0m1.824s
sys 0m7.122s
After:
$ time ./perf test pfm
54: Test libpfm4 support :
54.1: test of individual --pfm-events : Ok
54.2: test groups of --pfm-events : Ok
103: perf all libpfm4 events test : Ok
real 0m5.259s
user 0m1.793s
sys 0m3.570s
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250722013449.146233-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Merge series from Xianwei Zhao <xianwei.zhao@amlogic.com>:
Introduced support for the new SPI IP (SPISG). The SPISG is
a communication-oriented SPI controller from Amlogic,supporting
three operation modes: PIO, block DMA, and scatter-gather DMA.
Add the drivers and device tree bindings corresponding to the SPISG.
Stop using the obsolete write_cache_pages and use writeback_iter directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
read for the pinfile using Direct I/O do not wait for dio write.
Signed-off-by: yohan.joung <yohan.joung@sk.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
ubi_flush() was added in 2012 as part of
commit 62f384552b ("UBI: modify ubi_wl_flush function to clear work queue
for a lnum")
but has remained unused.
(It's friend ubi_wl_flush() is still used)
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Otherwise F2FS will not do GC in background in low free section.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There is no extra work before trace_f2fs_[dataread|datawrite]_end(),
so there is no need to check trace_<tracepoint>_enabled().
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When CONFIG_DEBUG_FS is off, drivers/gpu/drm/xe/xe_gt_debugfs.o
is not built and build fails on some setups with:
ld: drivers/gpu/drm/xe/xe_gt.o: in function `xe_fault_inject_gt_reset':
drivers/gpu/drm/xe/xe_gt.h:27:(.text+0x1659): undefined reference to `gt_reset_failure'
ld: drivers/gpu/drm/xe/xe_gt.h:27:(.text+0x1c16): undefined reference to `gt_reset_failure'
collect2: error: ld returned 1 exit status
Do not use the gt_reset_failure attribute if debugfs is not enabled.
Fixes: 8f3013e0b2 ("drm/xe: Introduce fault injection for gt reset")
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250722-xe-fix-build-fault-v1-1-157384d50987@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4d3bbe9dd2)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
According to Documentation/PCI/endpoint/pci-endpoint-cfs.rst, the Endpoint
controller (EPC) should only start the link when userspace writes '1' to
the '/sys/kernel/config/pci_ep/controllers/<EPC>/start' attribute, which
ultimately results in calling imx_pcie_start_link() via
pci_epc_start_store().
To align with the documented behavior, do not start the link automatically
when adding the EP controller.
Fixes: 75c2f26da0 ("PCI: imx6: Add i.MX PCIe EP mode support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: reworded commit subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250709033722.2924372-3-hongxing.zhu@nxp.com
apps_reset corresponds to LTSSM_EN in i.MX7, i.MX8MQ, i.MX8MM and i.MX8MP
platforms. Since assertion/de-assertion of apps_reset is done in
imx_pcie_ltssm_enable() and imx_pcie_ltssm_disable(), remove it from
imx_pcie_assert_core_reset() and imx_pcie_deassert_core_reset().
This also fixes a failure in enumerating the PI7C9X2G608GP (hotplug) chip
reliably on i.MX8MM, as reported by Tim.
It should be noted that only i.MX7D, i.MX8MQ, i.MX8MM, and i.MX8MP
platforms have the apps_reset logic, so this change doesn't have any effect
on other platforms.
Fixes: ef61c7d8d0 ("PCI: imx6: Deassert apps_reset in imx_pcie_deassert_core_reset()")
Reported-by: Tim Harvey <tharvey@gateworks.com>
Closes: https://lore.kernel.org/all/CAJ+vNU3ohR2YKTwC4xoYrc1z-neDoH2TTZcMHDy+poj9=jSy+w@mail.gmail.com/
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: reworded commit subject and description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Tim Harvey <tharvey@gateworks.com> # imx8mp-venice-gw74xx (i.MX8MP + hotplug capable switch)
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250709033722.2924372-2-hongxing.zhu@nxp.com
There is no need to store the err string in hw->err_str. Simplify it and
use common helper. hw->err_str is still used for other purpouse.
It should be marked that previously for unknown error the numeric value
was passed as a string. Now the "LIBIE_AQ_RC_UNKNOWN" is used for such
cases.
Add libie_aminq module in i40e Kconfig.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There is no need to store the err string in hw->err_str. Simplify it and
use common helper. hw->err_str is still used for other purpouse.
It should be marked that previously for unknown error the numeric value
was passed as a string. Now the "LIBIE_AQ_RC_UNKNOWN" is used for such
cases.
Add libie_aminq module in iavf Kconfig.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Simple:
s/ice_aq_str/libie_aq_str
Add libie_aminq module in ice Kconfig.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add a new module for common handling of Admin Queue related logic.
Start by a helper for error to string conversion. This lives inside
libie/, but is a separate module what follows our logic of splitting
into topical modules, to avoid pulling in not needed stuff, and have
better organization in general.
Olek suggested how to better solve the error to string conversion.
It will be used in follow-up patches in ice, i40e and iavf.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use libie_aq_desc instead of iavf_aq_desc. Do needed changes to allow
clean build
Use libie_aq_raw() wherever it can be used.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use libie_aq_desc instead of i40e_aq_desc. Do needed changes to allow
clean build.
Get version descriptor is a little less detailed on i40e. To not mess up
with shifting or union inside libie desc use get version descriptor from
i40e.
Move additional caps for i40e to libie.
Fix RCT in declaration that is using libie_aq_desc;
Use libie_aq_raw() wherever it can be used.
The libie aq error is extended, cover it in ice driver just to clean
build. In next patches the libie code for that will be used in each
of intel driver.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use libie_aq_desc instead of ixgbe_aci_desc. Do needed changes to allow
clean build.
Move additional caps used in ixgbe to libie.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The descriptor structure is the same in ice, ixgbe and i40e. Move it to
common libie header to use it across different driver.
Leave device specific adminq commands in separate folders. This lead to
a change that need to be done in filling/getting descriptor:
- previous: struct specific_desc *cmd;
cmd = &desc.params.specific_desc;
- now: struct specific_desc *cmd;
cmd = libie_aq_raw(&desc);
Do this changes across the driver to allow clean build. The casting only
have to be done in case of specific descriptors, for generic one union
can still be used.
Changes beside code moving:
- change ICE_ prefix to LIBIE_ prefix (ice_ and libie_ too)
- remove shift variables not otherwise needed (in libie_aq_flags)
- fill/get descriptor data based on desc.params.raw whenever the
descriptor isn't defined in libie
- move defines from the libie_aq_sth structure outside
- add libie_aq_raw helper and use it instead of explicit casting
Reviewed by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Some last-minute fixes. All changes are device-specific small fixes
or quirks, safe to apply.
-----BEGIN PGP SIGNATURE-----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=mkoF
-----END PGP SIGNATURE-----
Merge tag 'sound-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Some last-minute fixes. All changes are device-specific small fixes or
quirks, safe to apply"
* tag 'sound-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: mediatek: common: fix device and OF node leak
ALSA: hda/realtek: Fix mute LED mask on HP OMEN 16 laptop
ALSA: usb-audio: qcom: Adjust mutex unlock order
ASoC: SDCA: correct the calculation of the maximum init table size
ASoC: rt5650: Eliminate the high frequency glitch
ASoC: SOF: Intel: PTL: Add the sdw_process_wakeen op
ALSA: hda/realtek - Add mute LED support for HP Pavilion 15-eg0xxx
ALSA: hda/realtek - Add mute LED support for HP Victus 15-fa0xxx
ASoC: mediatek: mt8365-dai-i2s: pass correct size to mt8365_dai_set_priv
The function ksmbd_vfs_kern_path_locked() seems to serve two functions
and as a result has an odd interface.
On success it returns with the parent directory locked and with write
access on that filesystem requested, but it may have crossed over a
mount point to return the path, which makes the lock and the write
access irrelevant.
This patches separates the functionality into two functions:
- ksmbd_vfs_kern_path() does not lock the parent, does not request
write access, but does cross mount points
- ksmbd_vfs_kern_path_locked() does not cross mount points but
does lock the parent and request write access.
The parent_path parameter is no longer needed. For the _locked case
the final path is sufficient to drop write access and to unlock the
parent (using path->dentry->d_parent which is safe while the lock is
held).
There were 3 caller of ksmbd_vfs_kern_path_locked().
- smb2_create_link() needs to remove the target if it existed and
needs the lock and the write-access, so it continues to use
ksmbd_vfs_kern_path_locked(). It would not make sense to
cross mount points in this case.
- smb2_open() is the only user that needs to cross mount points
and it has no need for the lock or write access, so it now uses
ksmbd_vfs_kern_path()
- smb2_creat() does not need to cross mountpoints as it is accessing
a file that it has just created on *this* filesystem. But also it
does not need the lock or write access because by the time
ksmbd_vfs_kern_path_locked() was called it has already created the
file. So it could use either interface. It is simplest to use
ksmbd_vfs_kern_path().
ksmbd_vfs_kern_path_unlock() is still needed after
ksmbd_vfs_kern_path_locked() but it doesn't require the parent_path any
more. After a successful call to ksmbd_vfs_kern_path(), only path_put()
is needed to release the path.
Signed-off-by: NeilBrown <neil@brown.name>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
- Fix broken UUID value for the KVM/arm64 hypervisor SMCCC interface.
- Fix stack corruption on context-switch, primarily seen on (but not
limited to) configurations with both pNMI and SCS enabled.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmiBBXwQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFitB/9qIwohXTPcwfFux3FJpiUAMzY0KlP2TIJF
+wMRNSkYw/EKKorz4nzdEagyvWLvbFqg8eZDaoVTV7+DyQXb5Fz9R7s8yVQwBIpY
naAPm5A+I9gitiISA8M1Kr44MpTJBUHRpOSIIiTQK0/ijmd02sDkZZJuTUqYRmUP
1SY7A6Ps3Oz3cfqDtOIKUy8LNi22Wha6n9r3YghO5nhlLgrO1vMf/2uX1fRULTee
rpv4vICUjy9JK7F3W2osQ88UQkRY+l7vEtEzDdAYREPbg7m0ye1R1rTp2NiQ/mja
b+YoKudvdce4Mwui3UB5kRCDBB5kJIX7Itvu/AfjJ5e/cr0fI15X
=tkat
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Two important arm64 fixes ahead of the 6.16 release.
The first fixes a regression introduced during the merge window where
the KVM UUID (which is used to advertise KVM-specific hypercalls for
things like time synchronisation in the guest) was corrupted thanks to
an endianness bug introduced when converting the code to use the
UUID_INIT() helper.
The second fixes a stack-pointer corruption issue during
context-switch which has been observed in the wild when taking a
pseudo-NMI with shadow call stack enabled.
Summary:
- Fix broken UUID value for the KVM/arm64 hypervisor SMCCC interface
- Fix stack corruption on context-switch, primarily seen on (but not
limited to) configurations with both pNMI and SCS enabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/entry: Mask DAIF in cpu_switch_to(), call_on_irq_stack()
arm64: kvm, smccc: Fix vendor uuid
The TI regression notified last week is actually on our net-next tree,
it does not affect 6.16.
We are investigating a virtio regression which is quite hard to
reproduce - currently only our CI sporadically hits it. Hopefully it
should not be critical, and I'm not sure that an additional week would
be enough to solve it.
Current release - fix to a fix:
- sched: sch_qfq: avoid sleeping in atomic context in qfq_delete_class
Previous releases - regressions:
- xfrm:
- set transport header to fix UDP GRO handling
- delete x->tunnel as we delete x
- eth: mlx5: fix memory leak in cmd_exec()
- eth: i40e: when removing VF MAC filters, avoid losing PF-set MAC
- eth: gve: fix stuck TX queue for DQ queue format
Previous releases - always broken:
- can: fix NULL pointer deref of struct can_priv::do_set_mode
- eth: ice: fix a null pointer dereference in ice_copy_and_init_pkg()
- eth: ism: fix concurrency management in ism_cmd()
- eth: dpaa2: fix device reference count leak in MAC endpoint handling
- eth: icssg-prueth: fix buffer allocation for ICSSG
Misc:
- selftests: mptcp: increase code coverage
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmiCGdASHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkV2YP/idUgK6lAEHGIVvmhYn7TJCeA4Ekbybt
rjf71bUJRs1w64y2UFaK4/LOdOWoK6ztZIX3tFkkPwMKxvGsvymMcClhghSGU6E5
8h1jcgSCzvtAV6bSDeulDSfqKu4OJ2KCJomwQKKO0bu3RDQTkQdPNLxb6ysAonml
6Y0v2kiclnjtIdXJ+emdgQ3CBjLabPLTzXBVy1yuk0J1JLL2UACzK4xmacKvlpN0
heN7eEontRrPmBVNRY5+rw5yrYBwAg6Y8pa3dF3M8bXiXc0xvoT5c8lA9d0PNRSe
9TBeXwCASdr9vDFORoL87GwDV82pfrXrSAcHBfdW55ItblgkzLBiIkGsGGt5YynZ
1ZA8fGJVJwNbV7jFqQkjFob+Te6dCL1wcFNbbrrRtU5V24D0Q0YE56HHcFqgbuht
dLuDSsxVL1TGlpA5q2f1jylfIekLgMV9d1X8adagY1VRuzK4SzGZpCXEcpBUI2z3
boTpc/BTQx9t42qjegLZqCu+TmvVwYM6zarUvO8jQtC9LZpMY1sPxpu+qFd5yYJ1
VyK+EGOq7At6qwxchUBiwVsek08G5vXWsQFVA9qn+sPTi5iKhDB97dJFnnb1aBo/
aw/lYHFBzn5I31HhLaDKFMqie4JUOfj9gd/Ab7hR4u4jAqUG9tkPjrdCWtLFDrSn
Jn+o05q8HLwK
=7rIq
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and xfrm.
The TI regression notified last week is actually on our net-next tree,
it does not affect 6.16.
We are investigating a virtio regression which is quite hard to
reproduce - currently only our CI sporadically hits it. Hopefully it
should not be critical, and I'm not sure that an additional week would
be enough to solve it.
Current release - fix to a fix:
- sched: sch_qfq: avoid sleeping in atomic context in qfq_delete_class
Previous releases - regressions:
- xfrm:
- set transport header to fix UDP GRO handling
- delete x->tunnel as we delete x
- eth:
- mlx5: fix memory leak in cmd_exec()
- i40e: when removing VF MAC filters, avoid losing PF-set MAC
- gve: fix stuck TX queue for DQ queue format
Previous releases - always broken:
- can: fix NULL pointer deref of struct can_priv::do_set_mode
- eth:
- ice: fix a null pointer dereference in ice_copy_and_init_pkg()
- ism: fix concurrency management in ism_cmd()
- dpaa2: fix device reference count leak in MAC endpoint handling
- icssg-prueth: fix buffer allocation for ICSSG
Misc:
- selftests: mptcp: increase code coverage"
* tag 'net-6.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
net: hns3: default enable tx bounce buffer when smmu enabled
net: hns3: fixed vf get max channels bug
net: hns3: disable interrupt when ptp init failed
net: hns3: fix concurrent setting vlan filter issue
s390/ism: fix concurrency management in ism_cmd()
selftests: drv-net: wait for iperf client to stop sending
MAINTAINERS: Add in6.h to MAINTAINERS
selftests: netfilter: tone-down conntrack clash test
can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode
net/sched: sch_qfq: Avoid triggering might_sleep in atomic context in qfq_delete_class
gve: Fix stuck TX queue for DQ queue format
net: appletalk: Fix use-after-free in AARP proxy probe
net: bcmasp: Restore programming of TX map vector register
selftests: mptcp: connect: also cover checksum
selftests: mptcp: connect: also cover alt modes
e1000e: ignore uninitialized checksum word on tgp
e1000e: disregard NVM checksum on tgp when valid checksum bit is not set
ice: Fix a null pointer dereference in ice_copy_and_init_pkg()
i40e: When removing VF MAC filters, only check PF-set MAC
i40e: report VF tx_dropped with tx_errors instead of tx_discards
...
ri_buf just holds a pointer/len pair and is not a log iovec used for
writing to the log. Switch to use a kvec instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
These buffers are not directly logged, just use a kvec and remove the
xlog_copy_from_iovec helper only used here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The lv_size member counts the size of the entire allocation, rename it to
lv_alloc_size to make that clear.
The lv_buf_len member tracks how much of lv_buf has been used up
to format the log item, rename it to lv_buf_used to make that more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
