The R_QXXPC and R_NPBXC rules have some interesting (and pretty
sharp) corners when defining the behaviour of of WXN at S1:
- when S1 overlay is enabled, WXN applies to the overlay and
will remove W
- when S1 overlay is disabled, WXN applies to the base permissions
and will remove X.
Today, we lumb the two together in a way that doesn't really match
the rules, making things awkward to follow what is happening, in
particular when overlays are enabled.
Split these two rules over two distinct paths, which makes things
a lot easier to read and validate against the architecture rules.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250701151648.754785-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Some of the POE computation is a bit confused. Specifically, there
is an element of confusion between what wi->{e0,}poe an wr->{p,u}ov
actually represent.
- wi->{e0,}poe is an *input* to the walk, and indicates whether
POE is enabled at EL0 or EL{1,2}
- wr->{p,u}ov is a *result* of the walk, and indicates whether
overlays are enabled. Crutially, it is possible to have POE
enabled, and yet overlays disabled, while the converse isn't
true
What this all means is that once the base permissions have been
established, checking for wi->{e0,}poe makes little sense, because
the truth about overlays resides in wr->{p,u}ov. So constructs
checking for (wi->poe && wr->pov) only add perplexity.
Refactor compute_s1_overlay_permissions() and the way it is
called according to the above principles. Take the opportunity
to avoid reading registers that are not strictly required.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250701151648.754785-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
A preliminary version of a hack to invoke unmap_all_vpes() from an ioctl
didn't work very well. We eventually determined this was because we were
invoking it on the wrong file descriptor, but not getting an error.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/bbbddd56135399baf699bc46ffb6e7f08d9f8c9f.camel@infradead.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
This pull request contains the interconnect changes for the 6.17-rc1
merge window. It contains only driver changes.
Driver changes:
- SC8180X and SC8280XP driver fixes
- Add new driver for the Qualcomm Milos SoC
- Add Support for EPSS L3 hardware in QCS8300 SoC
- DT bindings fixes and other cleanups
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=o90z
-----END PGP SIGNATURE-----
Merge tag 'icc-6.17-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.17
This pull request contains the interconnect changes for the 6.17-rc1
merge window. It contains only driver changes.
Driver changes:
- SC8180X and SC8280XP driver fixes
- Add new driver for the Qualcomm Milos SoC
- Add Support for EPSS L3 hardware in QCS8300 SoC
- DT bindings fixes and other cleanups
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.17-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
dt-bindings: interconnect: Add EPSS L3 compatible for QCS8300 SoC
dt-bindings: interconnect: qcom: Remove double colon from description
interconnect: qcom: qcs615: Drop IP0 interconnects
interconnect: qcom: sc8180x: specify num_nodes
interconnect: qcom: sc8280xp: specify num_links for qnm_a1noc_cfg
This patch adds selftests to cover invalid narrower loads on the
context. These used to cause kernel warnings before the previous patch.
To trigger the warning, the load had to be aligned, to read an affected
context field (ex., skb->sk), and not starting at the beginning of the
field.
The nine new cases all fail without the previous patch.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/44cd83ea9c6868079943f0a436c6efa850528cc1.1753194596.git.paul.chaignon@gmail.com
The following BPF program, simplified from a syzkaller repro, causes a
kernel warning:
r0 = *(u8 *)(r1 + 169);
exit;
With pointer field sk being at offset 168 in __sk_buff. This access is
detected as a narrower read in bpf_skb_is_valid_access because it
doesn't match offsetof(struct __sk_buff, sk). It is therefore allowed
and later proceeds to bpf_convert_ctx_access. Note that for the
"is_narrower_load" case in the convert_ctx_accesses(), the insn->off
is aligned, so the cnt may not be 0 because it matches the
offsetof(struct __sk_buff, sk) in the bpf_convert_ctx_access. However,
the target_size stays 0 and the verifier errors with a kernel warning:
verifier bug: error during ctx access conversion(1)
This patch fixes that to return a proper "invalid bpf_context access
off=X size=Y" error on the load instruction.
The same issue affects multiple other fields in context structures that
allow narrow access. Some other non-affected fields (for sk_msg,
sk_lookup, and sockopt) were also changed to use bpf_ctx_range_ptr for
consistency.
Note this syzkaller crash was reported in the "Closes" link below, which
used to be about a different bug, fixed in
commit fce7bd8e38 ("bpf/verifier: Handle BPF_LOAD_ACQ instructions
in insn_def_regno()"). Because syzbot somehow confused the two bugs,
the new crash and repro didn't get reported to the mailing list.
Fixes: f96da09473 ("bpf: simplify narrower ctx access")
Fixes: 0df1a55afa ("bpf: Warn on internal verifier errors")
Reported-by: syzbot+0ef84a7bdf5301d4cbec@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0ef84a7bdf5301d4cbec
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/3b8dcee67ff4296903351a974ddd9c4dca768b64.1753194596.git.paul.chaignon@gmail.com
gem:
- revert all the dma-buf/gem changes
as there as lifetime issues with it.
nouveau:
- revert an ioctl change as it causes issues
- fix NULL ptr on fermi
bridge:
- remove extra semicolon
sched:
- remove hang causing optimisation
amdgpu:
- fix garbage in cleared vram after resume
-----BEGIN PGP SIGNATURE-----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=4EOG
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-07-24' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This might just be part one, but I'm sending it a bit early as it has
two sets of reverts for regressions, one is all the gem/dma-buf
handling and another was a nouveau ioctl change.
Otherwise there is an amdgpu fix, nouveau fix and a scheduler fix.
If any other changes come in I'll follow up with another more usual
Fri/Sat MR.
gem:
- revert all the dma-buf/gem changes as there as lifetime issues
with them
nouveau:
- revert an ioctl change as it causes issues
- fix NULL ptr on fermi
bridge:
- remove extra semicolon
sched:
- remove hang causing optimisation
amdgpu:
- fix garbage in cleared vram after resume"
* tag 'drm-fixes-2025-07-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/bridge: ti-sn65dsi86: Remove extra semicolon in ti_sn_bridge_probe()
Revert "drm/nouveau: check ioctl command codes better"
drm/nouveau/nvif: fix null ptr deref on pre-fermi boards
Revert "drm/gem-dma: Use dma_buf from GEM object instance"
Revert "drm/gem-shmem: Use dma_buf from GEM object instance"
Revert "drm/gem-framebuffer: Use dma_buf from GEM object instance"
Revert "drm/prime: Use dma_buf from GEM object instance"
Revert "drm/etnaviv: Use dma_buf from GEM object instance"
Revert "drm/vmwgfx: Use dma_buf from GEM object instance"
Revert "drm/virtio: Use dma_buf from GEM object instance"
drm/sched: Remove optimization that causes hang when killing dependent jobs
drm/amdgpu: Reset the clear flag in buddy during resume
A few packets may still be sent out during the termination of iperf
processes. These late packets cause failures in rss_ctx.py when they
arrive on queues expected to be empty.
Example failure observed:
Check failed 2 != 0 traffic on inactive queues (context 1):
[0, 0, 1, 1, 386385, 397196, 0, 0, 0, 0, ...]
Check failed 4 != 0 traffic on inactive queues (context 2):
[0, 0, 0, 0, 2, 2, 247152, 253013, 0, 0, ...]
Check failed 2 != 0 traffic on inactive queues (context 3):
[0, 0, 0, 0, 0, 0, 1, 1, 282434, 283070, ...]
To avoid such failures, wait until all client sockets for the requested
port are either closed or in the TIME_WAIT state.
Fixes: 847aa551fa ("selftests: drv-net: rss_ctx: factor out send traffic and check")
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722122655.3194442-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chia-Yu Chang says:
====================
DUALPI2 patch
This patch serise adds DualPI Improved with a Square (DualPI2) with
following features:
* Supports congestion controls that comply with the Prague requirements
in RFC9331 (e.g. TCP-Prague)
* Coupled dual-queue that separates the L4S traffic in a low latency
queue (L-queue), without harming remaining traffic that is scheduled
in classic queue (C-queue) due to congestion-coupling using PI2
as defined in RFC9332
* Configurable overload strategies
* Use of sojourn time to reliably estimate queue delay
* Supports ECN L4S-identifier (IP.ECN==0b*1) to classify traffic into
respective queues
For more details of DualPI2, please refer IETF RFC9332
(https://datatracker.ietf.org/doc/html/rfc9332).
====================
Link: https://patch.msgid.link/20250722095915.24485-1-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update configuration of tc-tests and preload DualPI2 module for self-tests,
and add following self-test cases for DualPI2:
Test a4c7: Create DualPI2 with default setting
Test 1ea4: Create DualPI2 with memlimit
Test 2130: Create DualPI2 with typical_rtt and max_rtt
Test 90c1: Create DualPI2 with max_rtt
Test 7b3c: Create DualPI2 with any_ect option
Test 49a3: Create DualPI2 with overflow option
Test d0a1: Create DualPI2 with drop_enqueue option
Test f051: Create DualPI2 with no_split_gso option
Test 456b: Create DualPI2 with packet step_thresh
Test 610c: Create DualPI2 with packet min_qlen_step
Test b4fa: Create DualPI2 with packet coupling_factor
Test 37f1: Create DualPI2 with packet classic_protection
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250722095915.24485-6-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace exit code check with '! cmd' and add both quote and $(...)
around 'nproc' to prevent warning and issue reported by shellcheck.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Link: https://patch.msgid.link/20250722095915.24485-5-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DualPI2 provides L4S-type low latency & loss to traffic that uses a
scalable congestion controller (e.g. TCP-Prague, DCTCP) without
degrading the performance of 'classic' traffic (e.g. Reno,
Cubic etc.). It is to be the reference implementation of IETF RFC9332
DualQ Coupled AQM (https://datatracker.ietf.org/doc/html/rfc9332).
Note that creating two independent queues cannot meet the goal of
DualPI2 mentioned in RFC9332: "...to preserve fairness between
ECN-capable and non-ECN-capable traffic." Further, it could even
lead to starvation of Classic traffic, which is also inconsistent
with the requirements in RFC9332: "...although priority MUST be
bounded in order not to starve Classic traffic." DualPI2 is
designed to maintain approximate per-flow fairness on L-queue and
C-queue by forming a single qdisc using the coupling factor and
scheduler between two queues.
The qdisc provides two queues called low latency and classic. It
classifies packets based on the ECN field in the IP headers. By
default it directs non-ECN and ECT(0) into the classic queue and
ECT(1) and CE into the low latency queue, as per the IETF spec.
Each queue runs its own AQM:
* The classic AQM is called PI2, which is similar to the PIE AQM but
more responsive and simpler. Classic traffic requires a decent
target queue (default 15ms for Internet deployment) to fully
utilize the link and to avoid high drop rates.
* The low latency AQM is, by default, a very shallow ECN marking
threshold (1ms) similar to that used for DCTCP.
The DualQ isolates the low queuing delay of the Low Latency queue
from the larger delay of the 'Classic' queue. However, from a
bandwidth perspective, flows in either queue will share out the link
capacity as if there was just a single queue. This bandwidth pooling
effect is achieved by coupling together the drop and ECN-marking
probabilities of the two AQMs.
The PI2 AQM has two main parameters in addition to its target delay.
The integral gain factor alpha is used to slowly correct any persistent
standing queue error from the target delay, while the proportional gain
factor beta is used to quickly compensate for queue changes (growth or
shrinkage). Either alpha and beta are given as a parameter, or they can
be calculated by tc from alternative typical and maximum RTT parameters.
Internally, the output of a linear Proportional Integral (PI)
controller is used for both queues. This output is squared to
calculate the drop or ECN-marking probability of the classic queue.
This counterbalances the square-root rate equation of Reno/Cubic,
which is the trick that balances flow rates across the queues. For
the ECN-marking probability of the low latency queue, the output of
the base AQM is multiplied by a coupling factor. This determines the
balance between the flow rates in each queue. The default setting
makes the flow rates roughly equal, which should be generally
applicable.
If DUALPI2 AQM has detected overload (due to excessive non-responsive
traffic in either queue), it will switch to signaling congestion
solely using drop, irrespective of the ECN field. Alternatively, it
can be configured to limit the drop probability and let the queue
grow and eventually overflow (like tail-drop).
GSO splitting in DUALPI2 is configurable from userspace while the
default behavior is to split gso. When running DUALPI2 at unshaped
10gigE with 4 download streams test, splitting gso apart results in
halving the latency with no loss in throughput:
Summary of tcp_4down run 'no_split_gso':
avg median # data pts
Ping (ms) ICMP : 0.53 0.30 ms 350
TCP download avg : 2326.86 N/A Mbits/s 350
TCP download sum : 9307.42 N/A Mbits/s 350
TCP download::1 : 2672.99 2568.73 Mbits/s 350
TCP download::2 : 2586.96 2570.51 Mbits/s 350
TCP download::3 : 1786.26 1798.82 Mbits/s 350
TCP download::4 : 2261.21 2309.49 Mbits/s 350
Summart of tcp_4down run 'split_gso':
avg median # data pts
Ping (ms) ICMP : 0.22 0.23 ms 350
TCP download avg : 2335.02 N/A Mbits/s 350
TCP download sum : 9340.09 N/A Mbits/s 350
TCP download::1 : 2335.30 2334.22 Mbits/s 350
TCP download::2 : 2334.72 2334.20 Mbits/s 350
TCP download::3 : 2335.28 2334.58 Mbits/s 350
TCP download::4 : 2334.79 2334.39 Mbits/s 350
A similar result is observed when running DUALPI2 at unshaped 1gigE
with 1 download stream test:
Summary of tcp_1down run 'no_split_gso':
avg median # data pts
Ping (ms) ICMP : 1.13 1.25 ms 350
TCP download : 941.41 941.46 Mbits/s 350
Summart of tcp_1down run 'split_gso':
avg median # data pts
Ping (ms) ICMP : 0.51 0.55 ms 350
TCP download : 941.41 941.45 Mbits/s 350
Additional details can be found in the draft:
https://datatracker.ietf.org/doc/html/rfc9332
Signed-off-by: Koen De Schepper <koen.de_schepper@nokia-bell-labs.com>
Co-developed-by: Olga Albisser <olga@albisser.org>
Signed-off-by: Olga Albisser <olga@albisser.org>
Co-developed-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Signed-off-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Co-developed-by: Henrik Steen <henrist@henrist.net>
Signed-off-by: Henrik Steen <henrist@henrist.net>
Co-developed-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: Bob Briscoe <research@bobbriscoe.net>
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Acked-by: Dave Taht <dave.taht@gmail.com>
Link: https://patch.msgid.link/20250722095915.24485-4-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The configuration and statistics dump of the DualPI2 Qdisc provides
information related to both queues, such as packet numbers and queuing
delays in the L-queue and C-queue, as well as general information such as
probability value, WRR credits, memory usage, packet marking counters, max
queue size, etc.
The following patch includes enqueue/dequeue for DualPI2.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Link: https://patch.msgid.link/20250722095915.24485-3-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DualPI2 is the reference implementation of IETF RFC9332 DualQ Coupled
AQM (https://datatracker.ietf.org/doc/html/rfc9332) providing two
queues called low latency (L-queue) and classic (C-queue). By default,
it enqueues non-ECN and ECT(0) packets into the C-queue and ECT(1) and
CE packets into the low latency queue (L-queue), as per IETF RFC9332 spec.
This patch defines the dualpi2 Qdisc structure and parsing, and the
following two patches include dumping and enqueue/dequeue for the DualPI2.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Link: https://patch.msgid.link/20250722095915.24485-2-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Byungchul Park says:
====================
Split netmem from struct page
The MM subsystem is trying to reduce struct page to a single pointer.
See the following link for your information:
https://kernelnewbies.org/MatthewWilcox/Memdescs/Path
The first step towards that is splitting struct page by its individual
users, as has already been done with folio and slab. This patchset does
that for page pool.
Matthew Wilcox tried and stopped the same work, you can see in:
https://lore.kernel.org/20230111042214.907030-1-willy@infradead.org
I focused on removing the page pool members in struct page this time,
not moving the allocation code of page pool from net to mm. It can be
done later if needed.
====================
Link: https://patch.msgid.link/20250721021835.63939-1-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make xdp access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-13-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make icssg-prueth access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-12-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make mlx5 access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-11-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make idpf access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-10-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make iavf access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-9-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make octeontx2-pf access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-8-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make fec access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-7-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make mt76 access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-6-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make netdevsim access ->pp through netmem_desc instead of page.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-5-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of struct page in page pool, the page pool users
should use netmem descriptor and APIs instead.
Make mlx4 access ->pp_ref_count through netmem_desc instead of page.
While at it, add a helper, pp_page_to_nmdesc() and __pp_page_to_nmdesc(),
that can be used to get netmem_desc from page only if it's a pp page.
For now that netmem_desc overlays on page, it can be achieved by just
casting, and use macro and _Generic to cover const casting as well.
Plus, change page_pool_page_is_pp() to check for 'const struct page *'
instead of 'struct page *' since it doesn't modify data and additionally
covers const type.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-4-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To eliminate the use of the page pool fields in struct page, the page
pool code should use netmem descriptor and APIs instead.
However, __netmem_get_pp() still accesses ->pp via struct page. So
change it to use struct netmem_desc instead, since ->pp no longer will
be available in struct page.
While at it, add a helper, __netmem_to_nmdesc(), that can be used to
unsafely get pointer to netmem_desc backing the netmem_ref, only when
the netmem_ref is always backed by system memory.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Link: https://patch.msgid.link/20250721021835.63939-3-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To simplify struct page, the page pool members of struct page should be
moved to other, allowing these members to be removed from struct page.
Introduce a network memory descriptor to store the members, struct
netmem_desc, and make it union'ed with the existing fields in struct
net_iov, allowing to organize the fields of struct net_iov.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20250721021835.63939-2-byungchul@sk.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IFLA_VXLAN_ID data has been converted to local variable vni in
vxlan_nl2conf(), there is no need to do it again when set conf->vni.
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250722093049.1527505-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netdevsim emulates firmware update and it takes 5 seconds to complete.
For some use cases, this is too long and unnecessary. Allow user to
configure the time by exposing debugfs a knob to set chunk time.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250722091945.79506-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct the misspelling "platorms" to "platforms" in the help text
for the CROS_USBPD_NOTIFY Kconfig option.
Signed-off-by: Keenan Salandy <keenansalandy@gmail.com>
Link: https://lore.kernel.org/r/20250723140930.1443-1-keenansalandy@gmail.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Original logic only sets the return value but doesn't jump out of the
loop if the bus is kept active by a client. This is not expected. A
malicious or buggy i2c client can hang the kernel in this case and
should be avoided. This is observed during a long time test with a
PCA953x GPIO extender.
Fix it by changing the logic to not only sets the return value, but also
jumps out of the loop and return to the caller with -ETIMEDOUT.
Fixes: fbfab1ab06 ("i2c: qup: reorganization of driver code to remove polling for qup v1")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250616-qca-i2c-v1-1-2a8d37ee0a30@outlook.com
The current implementation uses wait_for_completion(), which can cause
the caller to hang indefinitely if the transfer never completes.
Switch to wait_for_completion_interruptible() so that the operation can
be interrupted by signals.
Fixes: 84e1d0bf1d ("i2c: virtio: disable timeout handling")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: <stable@vger.kernel.org> # v5.16+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/b8944e9cab8eb959d888ae80add6f2a686159ba2.1751541962.git.viresh.kumar@linaro.org
The acpi_evaluate_object() returns an ACPI error code and not
Linux one. For the some platforms the err will have positive code
which may be interpreted incorrectly. Use device_reset() for
reset control which handles it correctly.
Fixes: bd2fdedbf2 ("i2c: tegra: Add the ACPI support")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Cc: <stable@vger.kernel.org> # v5.17+
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250710131206.2316-2-akhilrajeev@nvidia.com
Use guard to automatically release the lock after going out of scope
instead of calling it manually.
i2c_imx_slave_handle() can safely be entered with the lock held.
Refactored the i2c_imx_isr function so that i2c_imx_master_isr
does not participate in the guard scope
So Using scoped_guard simplifies the control flow
by ensuring consistent and automatic unlock,
which improves readability without affecting correctness.
Co-developed-by: Yongchao Jia <jyc0019@gmail.com>
Signed-off-by: Yongchao Jia <jyc0019@gmail.com>
Signed-off-by: Troy Mitchell <troymitchell988@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250531-i2c-imx-update-v4-1-bfad0c8fd45c@gmail.com
Allow clocks property to fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/lpc/lpc3250-ea3250.dtb: i2c@300 (nxp,pnx-i2c): Unevaluated properties are not allowed ('clocks' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250624200444.2514331-1-Frank.Li@nxp.com
Add support for the Renesas RZ/T2H (R9A09G077) SoC, which features a
different interrupt layout for the RIIC controller. Unlike other SoCs
with individual error interrupts, RZ/T2H uses a combined error interrupt
(EEI).
Introduce a new IRQ descriptor table for RZ/T2H, along with a custom
ISR (`riic_eei_isr`) to handle STOP and NACK detection from the shared
interrupt.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # on RZ/A1
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250625104526.101004-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Reorder the entry in `riic_i2c_dt_ids` to place the generic compatible
string `renesas,riic-rz` at the end of the array, following the
convention used in other Renesas drivers.
Also, drop the unnecessary comma after the sentinel entry, as it is
not needed.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # on RZ/A1
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250625104526.101004-5-prabhakar.mahadev-lad.rj@bp.renesas.com
In preparation for adding support for Renesas RZ/T2H and RZ/N2H SoCs,
which feature a combined error interrupt instead of individual error
interrupts per condition, update the driver to support configurable IRQ
layouts via OF data.
Introduce a new `irqs` field and `num_irqs` count in `riic_of_data` to
allow future SoCs to provide a custom IRQ layout. This patch is a
non-functional change for existing SoCs and maintains compatibility with
the current `riic_irqs` array.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # on RZ/A1
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250625104526.101004-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Document support for the I2C Bus Interface (RIIC) found on the Renesas
RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs.
The RIIC IP on these parts is similar to that on RZ/V2H(P) but supports
only four interrupts (including a combined error/event), lacks FM+ mode,
and does not require reset. Introduce a new compatible string
`renesas,riic-r9a09g077` for RZ/T2H and use it as a fallback for RZ/N2H.
Unlike earlier SoCs that use eight distinct interrupts, the RZ/T2H uses
only four. Update the binding schema to reflect this interrupt layout
and skip the `resets` property check, as it is not required on these SoCs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250625104526.101004-3-prabhakar.mahadev-lad.rj@bp.renesas.com
In preparation for adding more validation checks, move the `$ref` for
'i2c-controller.yaml' to the end of the file. Also, relocate the
conditional check for 'resets' into the 'allOf' block.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250625104526.101004-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Fix the kernel-doc warning by describing the 'dma_dev' member in
the tegra_i2c_dev struct. This resolves the compilation warning:
drivers/i2c/busses/i2c-tegra.c:297: warning: Function parameter or struct member 'dma_dev' not described in 'tegra_i2c_dev'
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250522163814.399630-1-18255117159@163.com
My CC-adding automation returned nothing on a future patch to the
include/linux/in6.h file, and I went looking for why. Add the missed
in6.h to MAINTAINERS.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722165645.work.047-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Fix cleanup mistake (probably a cut-and-paste error) in a Xen
hypercall.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmiBWM8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNC7wf+Oqx6vEB4RyFR2hoLRlQiKiL4uA1y
TLesrbHefK1VwrMn3rEXAzJQh1u67aUBj03u5ggqvRVvbDVaUztrAPM50qnxLIvY
G3nK7N+M3FCjDodXGD9xLywfV5+uFaCTlkeHbzL1CvO+cNKD7DPodH3yTJnuv7mN
4h0dSr1XWhHe+7nTtbkSVObPG1ndlZgbw+yxCel62p/dCBLcQblYjkbfD3XNmv+M
deJnlZt7p/bOSWCQh8qGY54JvF2hnjn/m11dosSXlSdjLUKBqF/YJMfuiBvYwl/C
ffDHVHhtXU0wAzyBwm4LJ7HhG65HoakYPDDEJkcOzQj84EH6F1+C2Y9EJQ==
=gjN5
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fix from Paolo Bonzini:
- Fix cleanup mistake (probably a cut-and-paste error) in a Xen
hypercall
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/xen: Fix cleanup logic in emulation of Xen schedop poll hypercalls
kvm_xen_schedop_poll does a kmalloc_array() when a VM polls the host
for more than one event channel potr (nr_ports > 1).
After the kmalloc_array(), the error paths need to go through the
"out" label, but the call to kvm_read_guest_virt() does not.
Fixes: 92c58965e9 ("KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly")
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Manuel Andreas <manuel.andreas@tum.de>
[Adjusted commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
