[BUG]
There is syzbot based reproducer that can crash the kernel, with the
following call trace: (With some debug output added)
DEBUG: rescue=ibadroots parsed
BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010)
BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8
BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm
BTRFS info (device loop0): using free-space-tree
BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0
DEBUG: read tree root path failed for tree csum, ret=-5
BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1 wanted 0x51be4e8b303da58e6340226815b70e3a93592dac3f30dd510c7517454de8567a found 0x51be4e8b303da58e634022a315b70e3a93592dac3f30dd510c7517454de8567a level 0
BTRFS warning (device loop0): checksum verify failed on logical 5292032 mirror 1 wanted 0x1924ccd683be9efc2fa98582ef58760e3848e9043db8649ee382681e220cdee4 found 0x0cb6184f6e8799d9f8cb335dccd1d1832da1071d12290dab3b85b587ecacca6e level 0
process 'repro' launched './file2' with NULL argv: empty string added
DEBUG: no csum root, idatacsums=0 ibadroots=134217728
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f]
CPU: 5 UID: 0 PID: 1010 Comm: repro Tainted: G OE 6.15.0-custom+ #249 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:btrfs_lookup_csum+0x93/0x3d0 [btrfs]
Call Trace:
<TASK>
btrfs_lookup_bio_sums+0x47a/0xdf0 [btrfs]
btrfs_submit_bbio+0x43e/0x1a80 [btrfs]
submit_one_bio+0xde/0x160 [btrfs]
btrfs_readahead+0x498/0x6a0 [btrfs]
read_pages+0x1c3/0xb20
page_cache_ra_order+0x4b5/0xc20
filemap_get_pages+0x2d3/0x19e0
filemap_read+0x314/0xde0
__kernel_read+0x35b/0x900
bprm_execve+0x62e/0x1140
do_execveat_common.isra.0+0x3fc/0x520
__x64_sys_execveat+0xdc/0x130
do_syscall_64+0x54/0x1d0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
---[ end trace 0000000000000000 ]---
[CAUSE]
Firstly the fs has a corrupted csum tree root, thus to mount the fs we
have to go "ro,rescue=ibadroots" mount option.
Normally with that mount option, a bad csum tree root should set
BTRFS_FS_STATE_NO_DATA_CSUMS flag, so that any future data read will
ignore csum search.
But in this particular case, we have the following call trace that
caused NULL csum root, but not setting BTRFS_FS_STATE_NO_DATA_CSUMS:
load_global_roots_objectid():
ret = btrfs_search_slot();
/* Succeeded */
btrfs_item_key_to_cpu()
found = true;
/* We found the root item for csum tree. */
root = read_tree_root_path();
if (IS_ERR(root)) {
if (!btrfs_test_opt(fs_info, IGNOREBADROOTS))
/*
* Since we have rescue=ibadroots mount option,
* @ret is still 0.
*/
break;
if (!found || ret) {
/* @found is true, @ret is 0, error handling for csum
* tree is skipped.
*/
}
This means we completely skipped to set BTRFS_FS_STATE_NO_DATA_CSUMS if
the csum tree is corrupted, which results unexpected later csum lookup.
[FIX]
If read_tree_root_path() failed, always populate @ret to the error
number.
As at the end of the function, we need @ret to determine if we need to
do the extra error handling for csum tree.
Fixes: abed4aaae4 ("btrfs: track the csum, extent, and free space trees in a rb tree")
Reported-by: Zhiyu Zhang <zhiyuzhang999@gmail.com>
Reported-by: Longxing Li <coregee2000@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Syzbot reported an assertion failure due to an attempt to add a delayed
iput after we have set BTRFS_FS_STATE_NO_DELAYED_IPUT in the fs_info
state:
WARNING: CPU: 0 PID: 65 at fs/btrfs/inode.c:3420 btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420
Modules linked in:
CPU: 0 UID: 0 PID: 65 Comm: kworker/u8:4 Not tainted 6.15.0-next-20250530-syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Workqueue: btrfs-endio-write btrfs_work_helper
RIP: 0010:btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420
Code: 4e ad 5d (...)
RSP: 0018:ffffc9000213f780 EFLAGS: 00010293
RAX: ffffffff83c635b7 RBX: ffff888058920000 RCX: ffff88801c769e00
RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000000
RBP: 0000000000000001 R08: ffff888058921b67 R09: 1ffff1100b12436c
R10: dffffc0000000000 R11: ffffed100b12436d R12: 0000000000000001
R13: dffffc0000000000 R14: ffff88807d748000 R15: 0000000000000100
FS: 0000000000000000(0000) GS:ffff888125c53000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00002000000bd038 CR3: 000000006a142000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
btrfs_put_ordered_extent+0x19f/0x470 fs/btrfs/ordered-data.c:635
btrfs_finish_one_ordered+0x11d8/0x1b10 fs/btrfs/inode.c:3312
btrfs_work_helper+0x399/0xc20 fs/btrfs/async-thread.c:312
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x70e/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
This can happen due to a race with the async reclaim worker like this:
1) The async metadata reclaim worker enters shrink_delalloc(), which calls
btrfs_start_delalloc_roots() with an nr_pages argument that has a value
less than LONG_MAX, and that in turn enters start_delalloc_inodes(),
which sets the local variable 'full_flush' to false because
wbc->nr_to_write is less than LONG_MAX;
2) There it finds inode X in a root's delalloc list, grabs a reference for
inode X (with igrab()), and triggers writeback for it with
filemap_fdatawrite_wbc(), which creates an ordered extent for inode X;
3) The unmount sequence starts from another task, we enter close_ctree()
and we flush the workqueue fs_info->endio_write_workers, which waits
for the ordered extent for inode X to complete and when dropping the
last reference of the ordered extent, with btrfs_put_ordered_extent(),
when we call btrfs_add_delayed_iput() we don't add the inode to the
list of delayed iputs because it has a refcount of 2, so we decrement
it to 1 and return;
4) Shortly after at close_ctree() we call btrfs_run_delayed_iputs() which
runs all delayed iputs, and then we set BTRFS_FS_STATE_NO_DELAYED_IPUT
in the fs_info state;
5) The async reclaim worker, after calling filemap_fdatawrite_wbc(), now
calls btrfs_add_delayed_iput() for inode X and there we trigger an
assertion failure since the fs_info state has the flag
BTRFS_FS_STATE_NO_DELAYED_IPUT set.
Fix this by setting BTRFS_FS_STATE_NO_DELAYED_IPUT only after we wait for
the async reclaim workers to finish, after we call cancel_work_sync() for
them at close_ctree(), and by running delayed iputs after wait for the
reclaim workers to finish and before setting the bit.
This race was recently introduced by commit 19e60b2a95 ("btrfs: add
extra warning if delayed iput is added when it's not allowed"). Without
the new validation at btrfs_add_delayed_iput(), this described scenario
was safe because close_ctree() later calls btrfs_commit_super(). That
will run any final delayed iputs added by reclaim workers in the window
between the btrfs_run_delayed_iputs() and the the reclaim workers being
shut down.
Reported-by: syzbot+0ed30ad435bf6f5b7a42@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/6840481c.a00a0220.d4325.000c.GAE@google.com/T/#u
Fixes: 19e60b2a95 ("btrfs: add extra warning if delayed iput is added when it's not allowed")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When building the free space tree with the block group tree feature
enabled, we can hit an assertion failure like this:
BTRFS info (device loop0 state M): rebuilding free space tree
assertion failed: ret == 0, in fs/btrfs/free-space-tree.c:1102
------------[ cut here ]------------
kernel BUG at fs/btrfs/free-space-tree.c:1102!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
Modules linked in:
CPU: 1 UID: 0 PID: 6592 Comm: syz-executor322 Not tainted 6.15.0-rc7-syzkaller-gd7fa1af5b33e #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102
lr : populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102
sp : ffff8000a4ce7600
x29: ffff8000a4ce76e0 x28: ffff0000c9bc6000 x27: ffff0000ddfff3d8
x26: ffff0000ddfff378 x25: dfff800000000000 x24: 0000000000000001
x23: ffff8000a4ce7660 x22: ffff70001499cecc x21: ffff0000e1d8c160
x20: ffff0000e1cb7800 x19: ffff0000e1d8c0b0 x18: 00000000ffffffff
x17: ffff800092f39000 x16: ffff80008ad27e48 x15: ffff700011e740c0
x14: 1ffff00011e740c0 x13: 0000000000000004 x12: ffffffffffffffff
x11: ffff700011e740c0 x10: 0000000000ff0100 x9 : 94ef24f55d2dbc00
x8 : 94ef24f55d2dbc00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff8000a4ce6f98 x4 : ffff80008f415ba0 x3 : ffff800080548ef0
x2 : 0000000000000000 x1 : 0000000100000000 x0 : 000000000000003e
Call trace:
populate_free_space_tree+0x514/0x518 fs/btrfs/free-space-tree.c:1102 (P)
btrfs_rebuild_free_space_tree+0x14c/0x54c fs/btrfs/free-space-tree.c:1337
btrfs_start_pre_rw_mount+0xa78/0xe10 fs/btrfs/disk-io.c:3074
btrfs_remount_rw fs/btrfs/super.c:1319 [inline]
btrfs_reconfigure+0x828/0x2418 fs/btrfs/super.c:1543
reconfigure_super+0x1d4/0x6f0 fs/super.c:1083
do_remount fs/namespace.c:3365 [inline]
path_mount+0xb34/0xde0 fs/namespace.c:4200
do_mount fs/namespace.c:4221 [inline]
__do_sys_mount fs/namespace.c:4432 [inline]
__se_sys_mount fs/namespace.c:4409 [inline]
__arm64_sys_mount+0x3e8/0x468 fs/namespace.c:4409
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Code: f0047182 91178042 528089c3 9771d47b (d4210000)
---[ end trace 0000000000000000 ]---
This happens because we are processing an empty block group, which has
no extents allocated from it, there are no items for this block group,
including the block group item since block group items are stored in a
dedicated tree when using the block group tree feature. It also means
this is the block group with the highest start offset, so there are no
higher keys in the extent root, hence btrfs_search_slot_for_read()
returns 1 (no higher key found).
Fix this by asserting 'ret' is 0 only if the block group tree feature
is not enabled, in which case we should find a block group item for
the block group since it's stored in the extent root and block group
item keys are greater than extent item keys (the value for
BTRFS_BLOCK_GROUP_ITEM_KEY is 192 and for BTRFS_EXTENT_ITEM_KEY and
BTRFS_METADATA_ITEM_KEY the values are 168 and 169 respectively).
In case 'ret' is 1, we just need to add a record to the free space
tree which spans the whole block group, and we can achieve this by
making 'ret == 0' as the while loop's condition.
Reported-by: syzbot+36fae25c35159a763a2a@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/6841dca8.a00a0220.d4325.0020.GAE@google.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If there's an unexpected (invalid) extent type, we just silently ignore
it. This means a corruption or some bug somewhere, so instead return
-EUCLEAN to the caller, making log replay fail, and print an error message
with relevant information.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In a few places where we call read_one_inode(), if we get a NULL pointer
we end up jumping into an error path, or fallthrough in case of
__add_inode_ref(), where we then do something like this:
iput(&inode->vfs_inode);
which results in an invalid inode pointer that triggers an invalid memory
access, resulting in a crash.
Fix this by making sure we don't do such dereferences.
Fixes: b4c50cbb01 ("btrfs: return a btrfs_inode from read_one_inode()")
CC: stable@vger.kernel.org # 6.15+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we break out of the loop because an extent buffer doesn't have the bit
EXTENT_BUFFER_TREE_REF set, we end up unlocking the xarray twice, once
before we tested for the bit and break out of the loop, and once again
after the loop.
Fix this by testing the bit and exiting before unlocking the xarray.
The time spent testing the bit is negligible and it's not worth trying
to do that outside the critical section delimited by the xarray lock due
to the code complexity required to avoid it (like using a local boolean
variable to track whether the xarray is locked or not). The xarray unlock
only needs to be done before calling release_extent_buffer(), as that
needs to lock the xarray (through xa_cmpxchg_irq()) and does a more
significant amount of work.
Fixes: 19d7f65f03 ("btrfs: convert the buffer_radix to an xarray")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/linux-btrfs/aDRNDU0GM1_D4Xnw@stanley.mountain/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Each superblock contains a copy of the device item for that device. In a
transaction which drops a chunk but doesn't create any new ones, we were
correctly updating the device item in the chunk tree but not copying
over the new bytes_used value to the superblock.
This can be seen by doing the following:
# dd if=/dev/zero of=test bs=4096 count=2621440
# mkfs.btrfs test
# mount test /root/temp
# cd /root/temp
# for i in {00..10}; do dd if=/dev/zero of=$i bs=4096 count=32768; done
# sync
# rm *
# sync
# btrfs balance start -dusage=0 .
# sync
# cd
# umount /root/temp
# btrfs check test
For btrfs-check to detect this, you will also need my patch at
https://github.com/kdave/btrfs-progs/pull/991.
Change btrfs_remove_dev_extents() so that it adds the devices to the
fs_info->post_commit_list if they're not there already. This causes
btrfs_commit_device_sizes() to be called, which updates the bytes_used
value in the superblock.
Fixes: bbbf7243d6 ("btrfs: combine device update operations during transaction commit")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a race between a rename and directory inode logging that if it
happens and we crash/power fail before the rename completes, the next time
the filesystem is mounted, the log replay code will end up deleting the
file that was being renamed.
This is best explained following a step by step analysis of an interleaving
of steps that lead into this situation.
Consider the initial conditions:
1) We are at transaction N;
2) We have directories A and B created in a past transaction (< N);
3) We have inode X corresponding to a file that has 2 hardlinks, one in
directory A and the other in directory B, so we'll name them as
"A/foo_link1" and "B/foo_link2". Both hard links were persisted in a
past transaction (< N);
4) We have inode Y corresponding to a file that as a single hard link and
is located in directory A, we'll name it as "A/bar". This file was also
persisted in a past transaction (< N).
The steps leading to a file loss are the following and for all of them we
are under transaction N:
1) Link "A/foo_link1" is removed, so inode's X last_unlink_trans field
is updated to N, through btrfs_unlink() -> btrfs_record_unlink_dir();
2) Task A starts a rename for inode Y, with the goal of renaming from
"A/bar" to "A/baz", so we enter btrfs_rename();
3) Task A inserts the new BTRFS_INODE_REF_KEY for inode Y by calling
btrfs_insert_inode_ref();
4) Because the rename happens in the same directory, we don't set the
last_unlink_trans field of directoty A's inode to the current
transaction id, that is, we don't cal btrfs_record_unlink_dir();
5) Task A then removes the entries from directory A (BTRFS_DIR_ITEM_KEY
and BTRFS_DIR_INDEX_KEY items) when calling __btrfs_unlink_inode()
(actually the dir index item is added as a delayed item, but the
effect is the same);
6) Now before task A adds the new entry "A/baz" to directory A by
calling btrfs_add_link(), another task, task B is logging inode X;
7) Task B starts a fsync of inode X and after logging inode X, at
btrfs_log_inode_parent() it calls btrfs_log_all_parents(), since
inode X has a last_unlink_trans value of N, set at in step 1;
8) At btrfs_log_all_parents() we search for all parent directories of
inode X using the commit root, so we find directories A and B and log
them. Bu when logging direct A, we don't have a dir index item for
inode Y anymore, neither the old name "A/bar" nor for the new name
"A/baz" since the rename has deleted the old name but has not yet
inserted the new name - task A hasn't called yet btrfs_add_link() to
do that.
Note that logging directory A doesn't fallback to a transaction
commit because its last_unlink_trans has a lower value than the
current transaction's id (see step 4);
9) Task B finishes logging directories A and B and gets back to
btrfs_sync_file() where it calls btrfs_sync_log() to persist the log
tree;
10) Task B successfully persisted the log tree, btrfs_sync_log() completed
with success, and a power failure happened.
We have a log tree without any directory entry for inode Y, so the
log replay code deletes the entry for inode Y, name "A/bar", from the
subvolume tree since it doesn't exist in the log tree and the log
tree is authorative for its index (we logged a BTRFS_DIR_LOG_INDEX_KEY
item that covers the index range for the dentry that corresponds to
"A/bar").
Since there's no other hard link for inode Y and the log replay code
deletes the name "A/bar", the file is lost.
The issue wouldn't happen if task B synced the log only after task A
called btrfs_log_new_name(), which would update the log with the new name
for inode Y ("A/bar").
Fix this by pinning the log root during renames before removing the old
directory entry, and unpinning after btrfs_log_new_name() is called.
Fixes: 259c4b96d7 ("btrfs: stop doing unnecessary log updates during a rename")
CC: stable@vger.kernel.org # 5.18+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a "scrub: " prefix to all messages logged by scrub so that it's
easy to filter them from dmesg for analysis.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a warning for leaked delayed_nodes when putting a root. We currently
do this for inodes, but not delayed_nodes.
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ Remove the changelog from the commit message. ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the delayed_root is not empty we are increasing the number of
references to a delayed_node without decreasing it, causing a leak. Fix
by decrementing the delayed_node reference count.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ Remove the changelog from the commit message. ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To help debugging include the root number in the error message, and since
this is a critical error that implies a metadata inconsistency and results
in a transaction abort change the log message level from "info" to
"critical", which is a much better fit.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Erni Sri Satya Vennela says:
====================
Support bandwidth clamping in mana using net shapers
This patchset introduces hardware-backed bandwidth rate limiting
for MANA NICs via the net_shaper_ops interface, enabling efficient and
fine-grained traffic shaping directly on the device.
Previously, MANA lacked a mechanism for user-configurable bandwidth
control. With this addition, users can now configure shaping parameters,
allowing better traffic management and performance isolation.
The implementation includes the net_shaper_ops callbacks in the MANA
driver and supports one shaper per vport. Add shaping support via
mana_set_bw_clamp(), allowing the configuration of bandwidth rates
in 100 Mbps increments (minimum 100 Mbps). The driver validates input
and rejects unsupported values. On failure, it restores the previous
configuration which is queried using mana_query_link_cfg() or
retains the current state.
To prevent potential deadlocks introduced by net_shaper_ops, switch to
_locked variants of NAPI APIs when netdevops_lock is held during
VF setup and teardown.
Also, Add support for ethtool get_link_ksettings to report the maximum
link speed supported by the SKU in mbps.
These APIs when invoked on hardware that are older or that do
not support these APIs, the speed would be reported as UNKNOWN and
the net-shaper calls to set speed would fail.
====================
Link: https://patch.msgid.link/1750144656-2021-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If any of the HWC commands are not recognized by the
underlying hardware, the hardware returns the response
header status of -1. Log the information using
netdev_info_once to avoid multiple error logs in dmesg.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-5-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow mana ethtool get_link_ksettings operation to report
the maximum speed supported by the SKU in mbps.
The driver retrieves this information by issuing a
HWC command to the hardware via mana_query_link_cfg(),
which retrieves the SKU's maximum supported speed.
These APIs when invoked on hardware that are older/do
not support these APIs, the speed would be reported as UNKNOWN.
Before:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
After:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 16000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for net_shaper_ops in the MANA driver,
enabling configuration of rate limiting on the MANA NIC.
To apply rate limiting, the driver issues a HWC command via
mana_set_bw_clamp() and updates the corresponding shaper object
in the net_shaper cache. If an error occurs during this process,
the driver restores the previous speed by querying the current link
configuration using mana_query_link_cfg().
The minimum supported bandwidth is 100 Mbps, and only values that are
exact multiples of 100 Mbps are allowed. Any other values are rejected.
To remove a shaper, the driver resets the bandwidth to the maximum
supported by the SKU using mana_set_bw_clamp() and clears the
associated cache entry. If an error occurs during this process,
the shaper details are retained.
On the hardware that does not support these APIs, the net-shaper
calls to set speed would fail.
Set the speed:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do set --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' },
"bw-max": 200000000 }'
Get the shaper details:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do get --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev", "id":'$ID' }}'
> {'bw-max': 200000000,
> 'handle': {'scope': 'netdev'},
> 'ifindex': $IFINDEX,
> 'metric': 'bps'}
Delete the shaper object:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/net_shaper.yaml \
--do delete --json '{"ifindex":'$IFINDEX',
"handle":{"scope": "netdev","id":'$ID' }}'
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When net_shaper_ops are enabled for MANA, netdev_ops_lock
becomes active.
MANA VF setup/teardown by netvsc follows this call chain:
netvsc_vf_setup()
dev_change_flags()
...
__dev_open() OR __dev_close()
dev_change_flags() holds the netdev mutex via netdev_lock_ops.
Meanwhile, mana_create_txq() and mana_create_rxq() in mana_open()
path call NAPI APIs (netif_napi_add_tx(), netif_napi_add_weight(),
napi_enable()), which also try to acquire the same lock, risking
deadlock.
Similarly in the teardown path (mana_close()), netif_napi_disable()
and netif_napi_del(), contend for the same lock.
Switch to the _locked variants of these APIs to avoid deadlocks
when the netdev_ops_lock is held.
Fixes: d4c22ec680 ("net: hold netdev instance lock during ndo_open/ndo_stop")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1750144656-2021-2-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is the new API for allocating DRM bridges.
Converting this driver is a bit complex because the drm_bridge funcs
pointer differs based on the bridge mode. So the current code does:
* tc_probe()
* devm_kzalloc() private struct embedding drm_bridge
* call tc_probe_bridge_endpoint() which
* parses DT description into struct fields
* computes the mode
* calls different bridge init functions based on the mode
* each sets a different bridge.funcs pointer
The new API expects the funcs pointer to be known at alloc time, which does
not fit in the current code structure.
Solve this by splitting tc_probe_bridge_endpoint() in two functions:
* tc_probe_get_mode(), computing the mode without needing the private
driver structure
* tc_probe_bridge_endpoint(), only initializing the endpoints
So now the mode is known before allocation and so
is the funcs pointer, while all other operations are still happening after
allocation, directly into the private struct data, as they used to.
The new code flow is:
* tc_probe()
* tc_probe_get_mode()
* parses DT description
* computes and returns the mode
* based onf the mode, pick the funcs pointer
* devm_drm_bridfge_alloc(..., funcs)
* call tc_probe_bridge_endpoint() which
* calls different bridge init functions based on the mode
* these don't set the funcs pointer, it was done by _alloc
This solution is chosen to minimize the changes in the driver logical code
flow. The drawback is we now iterate twice over the endpoints during probe.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250528-drm-bridge-convert-to-alloc-api-v4-1-f04e698c9a77@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The Rockchip driver contains duplicated message routing and INTx code
definitions (e.g., ROCKCHIP_PCIE_MSG_ROUTING_TO_RC,
ROCKCHIP_PCIE_MSG_CODE_ASSERT_INTA). These are already provided by the
PCI core in drivers/pci/pci.h as PCIE_MSG_TYPE_R_RC and
PCIE_MSG_CODE_ASSERT_INTA, respectively.
Remove the driver-specific definitions in favor of the core definitions
instead. This aligns the driver with the PCIe specification and reduces
maintenance overhead.
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250607154913.805027-3-18255117159@163.com
The Cadence driver previously defined its own message routing enums (e.g.,
MSG_ROUTING_LOCAL) and message codes, which duplicated existing PCI core
macros (PCIE_MSG_TYPE_R_LOCAL, PCIE_MSG_CODE_ASSERT_INTA, etc.) in
drivers/pci/pci.h. These core definitions align with the PCIe r6.0 spec.
Remove the driver-specific enums and switch to the centralized PCI core
macros. This eliminates redundancy, ensures consistency, and simplifies
future updates. No functional changes are introduced.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250607154913.805027-2-18255117159@163.com
The VHE hyp code has recently gained a few ISBs. Simplify this to one
unconditional ISB in __kvm_vcpu_run_vhe(), and remove the unnecessary
ISB from the kvm_call_hyp_ret() macro.
While kvm_call_hyp_ret() is also used to invoke
__vgic_v3_get_gic_config(), but no ISB is necessary in that case either.
For the moment, an ISB is left in kvm_call_hyp(), as there are many more
users, and removing the ISB would require a more thorough audit.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-8-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
This offset will be used in the time getters of auxiliary clocks. It is
added to the "monotonic" clock readout.
As auxiliary clocks do not utilize the offset fields of the core time
keeper, this is just an alias for offs_tai, so that the cache line layout
stays the same.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250519083026.533486349@linutronix.de
Now that we stash persistent information in struct pid there's no need
to play volatile games with pinning struct pid via dentries in pidfs.
Link: https://lore.kernel.org/20250618-work-pidfs-persistent-v2-8-98f3456fd552@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Persist exit and coredump information independent of whether anyone
currently holds a pidfd for the struct pid.
The current scheme allocated pidfs dentries on-demand repeatedly.
This scheme is reaching it's limits as it makes it impossible to pin
information that needs to be available after the task has exited or
coredumped and that should not be lost simply because the pidfd got
closed temporarily. The next opener should still see the stashed
information.
This is also a prerequisite for supporting extended attributes on
pidfds to allow attaching meta information to them.
If someone opens a pidfd for a struct pid a pidfs dentry is allocated
and stashed in pid->stashed. Once the last pidfd for the struct pid is
closed the pidfs dentry is released and removed from pid->stashed.
So if 10 callers create a pidfs dentry for the same struct pid
sequentially, i.e., each closing the pidfd before the other creates a
new one then a new pidfs dentry is allocated every time.
Because multiple tasks acquiring and releasing a pidfd for the same
struct pid can race with each another a task may still find a valid
pidfs entry from the previous task in pid->stashed and reuse it. Or it
might find a dead dentry in there and fail to reuse it and so stashes a
new pidfs dentry. Multiple tasks may race to stash a new pidfs dentry
but only one will succeed, the other ones will put their dentry.
The current scheme aims to ensure that a pidfs dentry for a struct pid
can only be created if the task is still alive or if a pidfs dentry
already existed before the task was reaped and so exit information has
been was stashed in the pidfs inode.
That's great except that it's buggy. If a pidfs dentry is stashed in
pid->stashed after pidfs_exit() but before __unhash_process() is called
we will return a pidfd for a reaped task without exit information being
available.
The pidfds_pid_valid() check does not guard against this race as it
doens't sync at all with pidfs_exit(). The pid_has_task() check might be
successful simply because we're before __unhash_process() but after
pidfs_exit().
Introduce a new scheme where the lifetime of information associated with
a pidfs entry (coredump and exit information) isn't bound to the
lifetime of the pidfs inode but the struct pid itself.
The first time a pidfs dentry is allocated for a struct pid a struct
pidfs_attr will be allocated which will be used to store exit and
coredump information.
If all pidfs for the pidfs dentry are closed the dentry and inode can be
cleaned up but the struct pidfs_attr will stick until the struct pid
itself is freed. This will ensure minimal memory usage while persisting
relevant information.
The new scheme has various advantages. First, it allows to close the
race where we end up handing out a pidfd for a reaped task for which no
exit information is available. Second, it minimizes memory usage.
Third, it allows to remove complex lifetime tracking via dentries when
registering a struct pid with pidfs. There's no need to get or put a
reference. Instead, the lifetime of exit and coredump information
associated with a struct pid is bound to the lifetime of struct pid
itself.
Link: https://lore.kernel.org/20250618-work-pidfs-persistent-v2-5-98f3456fd552@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
* Add a callback to struct stashed_operations so it's possible to
implement custom behavior for pidfs and allow for it to return errors.
* Teach stashed_dentry_get() to handle error pointers.
Link: https://lore.kernel.org/20250618-work-pidfs-persistent-v2-2-98f3456fd552@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Similar to commit 1ed95281c0 ("anon_inode: raise SB_I_NODEV and SB_I_NOEXEC"):
it shouldn't be possible to execute pidfds via
execveat(fd_anon_inode, "", NULL, NULL, AT_EMPTY_PATH)
so raise SB_I_NOEXEC so that no one gets any creative ideas.
Also raise SB_I_NODEV as we don't expect or support any devices on pidfs.
Link: https://lore.kernel.org/20250618-work-pidfs-persistent-v2-1-98f3456fd552@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Provide timekeepers for auxiliary clocks and initialize them during
boot.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250519083026.350061049@linutronix.de
In preparation for supporting independent auxiliary timekeepers, add a
clock valid field and set it to true for the system timekeeper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250519083026.287145536@linutronix.de
Don't invoke the VDSO and paravirt updates when utilized for auxiliary
clocks. This is a temporary workaround until the VDSO and paravirt
interfaces have been worked out.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250519083026.223876435@linutronix.de
In __timekeeping_advance() the pointer to struct tk_data is hardcoded by the
use of &tk_core. As long as there is only a single timekeeper (tk_core),
this is not a problem. But when __timekeeping_advance() will be reused for
per auxiliary timekeepers, __timekeeping_advance() needs to be generalized.
Add a pointer to struct tk_data as function argument of
__timekeeping_advance() and adapt all call sites.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250519083026.160967312@linutronix.de
In preparation for supporting auxiliary POSIX clocks, add a timekeeper ID
to the relevant functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250519083026.032425931@linutronix.de
If auxiliary clocks are enabled, provide an array of NTP data so that the
auxiliary timekeepers can be steered independently of the core timekeeper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250519083025.969000914@linutronix.de
To support auxiliary timekeeping and the related user space interfaces,
it's required to define a clock ID range for them.
Reserve 8 auxiliary clock IDs after the regular timekeeping clock ID space.
This is the maximum number of auxiliary clocks the kernel can support. The actual
number of supported clocks depends obviously on the presence of related devices
and might be constraint by the available VDSO space.
Add the corresponding timekeeper IDs as well.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250519083025.905800695@linutronix.de
As long as there is only a single timekeeper, there is no need to clarify
which timekeeper is used. But with the upcoming reusage of the timekeeper
infrastructure for auxiliary clock timekeepers, an ID is required to
differentiate.
Introduce an enum for timekeeper IDs, introduce a field in struct tk_data
to store this timekeeper id and add also initialization. The id struct
field is added at the end of the second cachline, as there is a 4 byte hole
anyway.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250519083025.842476378@linutronix.de
This was overlooked in the initial conversion. Use the provided pointer to
access the shadow timekeeper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250519083025.652611452@linutronix.de
Harmonize sof_ipc4_set_pipeline_state() dbg print with the new print
in sof_ipc4_set_multi_pipeline_state().
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250619121121.25241-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a dev_dbg to sof_ipc4_set_multi_pipeline_state(). The debug print
lists the pipeline instance numbers that are included in the
SOF_IPC4_GLB_SET_PIPELINE_STATE message. Without this log its very
hard to tell what pipelines are affected. This print is very helpful
when analyzing SOF logs automatically.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250619121121.25241-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
